Other credential helpers support deleting credentials that match a
specified password. See 7144dee3ec (credential/libsecret: erase matching
creds only, 2023-07-26) and cb626f8e5c (credential/wincred: erase
matching creds only, 2023-07-26).
Support this in osxkeychain too by extracting, decrypting and comparing
the stored password before deleting.
Fixes the following test failure with osxkeychain:
11 - helper (osxkeychain) does not erase a password distinct from
input
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other credential managers erased all matching credentials, as indicated
by a test case that osxkeychain failed:
15 - helper (osxkeychain) erases all matching credentials
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SecKeychain API was deprecated in macOS 10.10, nearly 10 years ago.
The replacement SecItem API however is available as far back as macOS
10.6.
While supporting older macOS was perhaps prevously a concern,
git-credential-osxkeychain already requires a minimum of macOS 10.7
since 5747c8072b (contrib/credential: avoid fixed-size buffer in
osxkeychain, 2023-05-01) so using the newer API should not regress the
range of macOS versions supported.
Adapting to use the newer SecItem API also happens to fix two test
failures in osxkeychain:
8 - helper (osxkeychain) overwrites on store
9 - helper (osxkeychain) can forget host
The new API is compatible with credentials saved with the older API.
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When constructing a new pack `git multi-pack-index repack` provides a
list of objects which is the union of objects in all MIDX'd packs which
were "included" in the repack.
Though correct, this typically yields a poorly structured pack, since
providing the objects list over stdin does not give pack-objects a
chance to discover the namehash values for each object, leading to
sub-optimal delta selection.
We can use `--stdin-packs` instead, which has a couple of benefits:
- it does a supplemental walk over objects in the supplied list of
packs to discover their namehash, leading to higher-quality delta
selection
- it requires us to list far less data over stdin; instead of listing
each object in the resulting pack, we need only list the
constituent packs from which those objects were selected in the MIDX
Of course, this comes at a slight cost: though we save time on listing
packs versus objects over stdin[^1] (around ~650 milliseconds), we add a
non-trivial amount of time walking over the given objects in order to
find better deltas.
In general, this is likely to more closely match the user's expectations
(i.e. that packs generated via `git multi-pack-index repack` are written
with high-quality deltas). But if not, we can always introduce a new
option in pack-objects to disable the supplemental object walk, which
would yield a pure CPU-time savings, at the cost of the on-disk size of
the resulting pack.
[^1]: In a patched version of Git that doesn't perform the supplemental
object walk in `pack-objects --stdin-packs`, we save around ~650ms
(from 5.968 to 5.325 seconds) when running `git multi-pack-index
repack --batch-size=0` on git.git with all objects packed, and all
packs in a MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In both fill_included_packs_all() and fill_included_packs_batch(), we
accumulate a list of packs whose contents we want to repack together,
and then use that information to feed a list of objects as input to
pack-objects.
In both cases, the `fill_included_packs_` functions keep track of how
many packs they want to repack together, and only execute pack-objects
if there are at least two packs that need repacking.
Having both of these functions keep track of this information themselves
is not strictly necessary, since they also log which packs to repack via
the `include_pack` array, so we can simply count the non-zero entries in
that array after either function is done executing, reducing the overall
amount of code necessary.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a 'git multi-pack-index repack', the MIDX machinery
tries to aggregate MIDX'd packs together either to (a) fill the given
`--batch-size` argument, or (b) combine all packs together.
In either case (using the `midx-write.c::fill_included_packs_batch()` or
`midx-write.c::fill_included_packs_all()` function, respectively), we
evaluate whether or not we want to repack each MIDX'd pack, according to
whether or it is loadable, kept, cruft, or non-empty.
Between the two `fill_included_packs_` callers, they both care about the
same conditions, except for `fill_included_packs_batch()` which also
cares that the pack is non-empty.
We could extract two functions (say, `want_included_pack()` and a
`_nonempty()` variant), but this is not necessary. For the case in
`fill_included_packs_all()` which does not check the pack size, we add
all of the pack's objects assuming that the pack meets all other
criteria. But if the pack is empty in the first place, we add all of its
zero objects, so whether or not we "accept" or "reject" it in the first
place is irrelevant.
This change improves the readability in both `fill_included_packs_`
functions.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new midx-write.c source file, which holds all of the
functionality from the MIDX sub-system related to writing new MIDX files.
Similar to the relationship between "pack-bitmap.c" and
"pack-bitmap-write.c", this source file will hold code that is specific
to writing MIDX files as opposed to reading them (the latter will remain
in midx.c).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An additional test to demonstrate that clone would not choke on a
global configuration file that uses includeIf.onbranch:*.path.
* ps/clone-with-includeif-onbranch:
t5601: exercise clones with "includeIf.*.onbranch"
Fix the way recently added tests interpolate variables defined
outside them, and document the best practice to help future
developers.
* ps/t7800-variable-interpolation-fix:
t/README: document how to loop around test cases
t7800: use single quotes for test bodies
t7800: improve test descriptions with empty arguments
A unit test for reftable code tried to enumerate all files in a
directory after reftable operations and expected to see nothing but
the files it wanted to leave there, but was fooled by .nfs* cruft
files left, which has been corrected.
* ps/reftable-unit-test-nfs-workaround:
reftable: fix tests being broken by NFS' delete-after-close semantics
Hints that suggest what to do after resolving conflicts can now be
squelched by disabling advice.mergeConflict.
Acked-by: Phillip Wood <phillip.wood123@gmail.com>
cf. <e040c631-42d9-4501-a7b8-046f8dac6309@gmail.com>
* pb/advice-merge-conflict:
builtin/am: allow disabling conflict advice
sequencer: allow disabling conflict advice
"git config" corrupted literal HT characters written in the
configuration file as part of a value, which has been corrected.
* ds/config-internal-whitespace-fix:
config.txt: describe handling of whitespace further
t1300: add more tests for whitespace and inline comments
config: really keep value-internal whitespace verbatim
config: minor addition of whitespace
Code clean-up in the "git log" machinery that implements custom log
message formatting.
* jk/pretty-subject-cleanup:
format-patch: fix leak of empty header string
format-patch: simplify after-subject MIME header handling
format-patch: return an allocated string from log_write_email_headers()
log: do not set up extra_headers for non-email formats
pretty: drop print_email_subject flag
pretty: split oneline and email subject printing
shortlog: stop setting pp.print_email_subject
"git checkout --conflict=bad" reported a bad conflictStyle as if it
were given to a configuration variable; it has been corrected to
report that the command line option is bad.
* pw/checkout-conflict-errorfix:
checkout: fix interaction between --conflict and --merge
checkout: cleanup --conflict=<style> parsing
merge options: add a conflict style member
merge-ll: introduce LL_MERGE_OPTIONS_INIT
xdiff-interface: refactor parsing of merge.conflictstyle
As it stands, the only call site of `__git_ps1_show_upstream` checks
that the `GIT_PS1_SHOWUPSTREAM` variable is set, so this is effectively
a no-op. However, that might change, and chances of noticing the
unprotected use might not be that high when it does.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`GIT_PS1_SHOWCONFLICTSTATE` is a user variable that might not be set,
causing errors when the shell is in `nounset` mode.
Take into account on access by falling back to an empty string.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix some small capitalization issues, as spotted while going through the
documentation. In general, a semicolon doesn't start a new sentence, and
"this" has no meaning of a proper noun in this context.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If len is INT_MAX in mem_pool_strvfmt(), then len + 1 overflows.
Casting it to size_t would prevent that. Use st_add() to go a step
further and make the addition *obviously* safe. The compiler can
optimize the check away on platforms where SIZE_MAX > INT_MAX, i.e.
basically everywhere.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When environment variable GIT_TEST_MAINT_SCHEDULER is set, `git
maintenance` invokes the command specified as the variable's value
rather than invoking the actual underlying platform-specific scheduler
management command. By setting GIT_TEST_MAINT_SCHEDULER to some suitable
value, test authors can therefore validate behavior of "destructive"
`git maintenance` commands without having to worry about clobbering the
user's own local scheduler configuration.
In order to protect an absent-minded test author from forgetting to set
GIT_TEST_MAINT_SCHEDULER in the local test script (and thus clobbering
his or her own scheduler configuration), t/test-lib.sh assigns an
"immediately error-out" value to GIT_TEST_MAINT_SCHEDULER by default
which should ensure that the problem will be caught and reported before
any damage can be done to the configuration of the person running the
tests.
Unfortunately, however, t/test-lib.sh neglects to export
GIT_TEST_MAINT_SCHEDULER, which renders the default "error-out"
assignment worthless. Fix this by exporting the variable as
originally intended.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-of-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By following a similar reasoning as in previous commits, there are no
reason why we should not use the advise_if_enabled() API to display the
ADVICE_ADD_EMBEDDED_REPO advice.
This advice was introduced in 532139940c (add: warn when adding an
embedded repository, 2017-06-14). Some tests were included in the
commit, but none is testing this advice. Which, note, we only want to
display once per run.
So, use the advise_if_enabled() machinery to show the
ADVICE_ADD_EMBEDDED_REPO advice and include a test to notice any
possible breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 93b0d86aaf (git-add: error out when given no arguments.,
2006-12-20) we display a message when no arguments are given to "git
add".
Part of that message was converted to advice in bf66db37f1 (add: use
advise function to display hints, 2020-01-07).
Following the same line of reasoning as in the previous commit, it is
sensible to use advise_if_enabled() here.
Therefore, use advise_if_enabled() in builtin/add.c to show the
ADVICE_ADD_EMPTY_PATHSPEC advice, and don't bother checking there the
visibility of the advice or displaying the instruction on how to disable
it.
Also add a test for these messages, in order to detect a possible
change in them.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b3b18d1621 (advice: revamp advise API, 2020-03-02), we can use
advise_if_enabled() to display an advice. This API encapsulates three
actions:
1.- checking the visibility of the advice
2.- displaying the advice when appropriate
3.- displaying instructions on how to disable the advice, when
appropriate
The code we have in builtin/add.c to display the ADVICE_ADD_IGNORED_FILE
advice, is doing these three things. However, the instructions
displayed on how to disable the hint are not shown in the normalized way
that advise_if_enabled() introduced. This may cause distraction.
There is no reason not to use the new API here. On the contrary, by
using it we gain simplicity in the code and avoid possible distractions.
For these reasons, use the newer advise_if_enabled() machinery to show
the ADVICE_ADD_IGNORED_FILE advice, and don't bother checking the
visibility or displaying the instruction on how to disable the advice.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By definition, a detached HEAD state is tentative and there is no
configured "upstream" that it always wants to integrate with. But
if you detach from a branch that is behind its upstream, e.g.,
$ git checkout -t -b main origin/main
$ git checkout main
$ git reset --hard HEAD^
$ git checkout --detach main
you'd see "you are behind your upstream origin/main". This does not
happen when you replace the last step in the above with any of these
$ git checkout HEAD^0
$ git checkout --detach HEAD
$ git checkout --detach origin/main
Before 32669671 (checkout: introduce --detach synonym for "git
checkout foo^{commit}", 2011-02-08) introduced the "--detach"
option, the rule to decide if we show the tracking information
used to be:
If --quiet is not given, and if the given branch name is a real
local branch (i.e. the one we can compute the file path under
.git/, like 'refs/heads/master' or "HEAD" which stand for the
name of the current branch", then give the tracking information.
to exclude things like "git checkout master^0" (which was the
official way to detach HEAD at the commit before that commit) and
"git checkout origin/master^0" from showing tracking information,
but still do show the tracking information for the current branch
for "git checkout HEAD". The introduction of an explicit option
"--detach" broke this subtley. The new rule should have been
If --quiet is given, do not bother with tracking info.
If --detach is given, do not bother with tracking info.
Otherwise, if we know that the branch name given is a real local
branch, or if we were given "HEAD" and "HEAD" is not detached,
then attempt to show the tracking info.
but it allowed "git checkout --detach master" to also show the
tracking info by mistake. Let's tighten the rule to fix this.
Reported-by: mirth hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git tools all consistently encourage users to avoid whitespaces at
the end of line by giving them features like "git diff --check" and
"git am --whitespace=fix". Make sure that the advice messages we
give users avoid trailing whitespaces. We shouldn't be wasting
vertical screen real estate by adding blank lines in advice messages
that are supposed to be concise hints, but as long as we write such
blank line in our "hints", we should do it right.
A test that expects the current behaviour of leaving trailing
whitespaces has been adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the new formatting of literal and placeholders is introduced,
the synopsis in the man pages can now hold additional markup with
respect to the command help.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Literal and placeholder formatting is more heavily enforced, with some
asciidoc magic. Basically, the markup is preserved everywhere.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git update-index --cacheinfo" ought to be filesystem
agnostic,
$ git update-index --add --cacheinfo "100644,$empty_blob,funny /empty"
fails only on Windows, and this unfortunately makes the approach of
the previous step unworkable.
Resurrect the earlier approach to give up on running the test on
known-bad platforms. Instead of computing a custom prerequisite,
just use !MINGW we have used elsewhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive-patch is a sequential process where, on each step, we
print one hunk from a patch and then ask the user how to proceed.
There is a possibility of repeating a step, for example if the user
enters a non-applicable option, i.e: "s"
$ git add -p
diff --git a/add-patch.c b/add-patch.c
index 52be1ddb15..8fb75e82e2 100644
--- a/add-patch.c
+++ b/add-patch.c
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]? s
Sorry, cannot split this hunk
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]?
... or an invalid option, i.e: "U"
$ git add -p
diff --git a/add-patch.c b/add-patch.c
index 52be1ddb15..8fb75e82e2 100644
--- a/add-patch.c
+++ b/add-patch.c
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]? U
y - stage this hunk
n - do not stage this hunk
q - quit; do not stage this hunk or any of the remaining ones
a - stage this hunk and all later hunks in the file
d - do not stage this hunk or any of the later hunks in the file
j - leave this hunk undecided, see next undecided hunk
J - leave this hunk undecided, see next hunk
g - select a hunk to go to
/ - search for a hunk matching the given regex
e - manually edit the current hunk
p - print again the current hunk
? - print help
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]?
Printing the chunk again followed by the question can be confusing as
the user has to pay special attention to notice that the same chunk is
being reconsidered.
It can also be problematic if the chunk is longer than one screen height
because the result of the previous iteration is lost off the screen (the
help guide in the previous example).
To avoid such problems, stop printing the chunk if the iteration does
not advance to a different chunk.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shortly we're going make interactive-patch stop printing automatically
the hunk under certain circumstances.
Let's introduce a new option to allow the user to explicitly request
the printing.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As afb31ad9 (t1010: fix unnoticed failure on Windows, 2021-12-11)
said:
On Microsoft Windows, a directory name should never end with a period.
Quoting from Microsoft documentation[1]:
Do not end a file or directory name with a space or a period.
Although the underlying file system may support such names, the
Windows shell and user interface does not.
[1]: https://docs.microsoft.com/en-us/windows/win32/fileio/naming-a-file
and the condition addressed by this change is exactly that. If the
platform is unable to properly create these sample patches about a
file that lives in a directory whose name ends with a SP, there is
no point testing how "git apply" behaves there on the filesystem.
Even though the ultimate purpose of "git apply" is to apply a patch
and to update the filesystem entities, this particular test is
mainly about parsing a patch on a funny pathname correctly, and even
on a system that is incapable of checking out the resulting state
correctly on its filesystem, at least the parsing can and should work
fine. Rewrite the test to work inside the index without touching the
filesystem.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove an ancient and not well maintained Hg-to-git migration
script from contrib/.
Acked-by: Stelian Pop <stelian@popies.net>
cf. <37e4cd61-b370-437e-bd42-f98f47d3ad32@popies.net>
* jk/drop-hg-to-git:
contrib: drop hg-to-git script
The status.showUntrackedFiles configuration variable had a name
that tempts users to set a Boolean value expressed in our usual
"false", "off", and "0", but it only took "no". This has been
corrected so "true" and its synonyms are taken as "normal", while
"false" and its synonyms are taken as "no".
* jc/show-untracked-false:
status: allow --untracked=false and friends
status: unify parsing of --untracked= and status.showUntrackedFiles
"git diff" and friends learned two extra configuration variables,
diff.srcPrefix and diff.dstPrefix.
* ph/diff-src-dst-prefix-config:
diff.*Prefix: use camelCase in the doc and test titles
diff: add diff.srcPrefix and diff.dstPrefix configuration variables
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
In the last chapter of this document, pipes are used in commands to
filter out the first/last trace messages. But according to git(1),
trace messages are sent to stderr if GIT_TRACE is set to '1', so those
commands do not produce the described results.
Fix this by redirecting stderr to stdout prior to the pipe operator
to additionally connect stderr to stdin of the latter command.
Further, while reviewing the above fix, Kyle Lippincott noticed
a second issue with the second of the examples: a missing slash in the
executable path "./bin-wrappers git".
Add the missing slash.
Helped-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the changes to count omitted objects, the function
traverse_commit_list() was used and its call cannot be changed to pass
a pointer to an oidset to record omitted objects.
Fix the text to clarify that we now use another traversal function to
be able to pass the pointer to the introduced oidset.
Helped-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f0d2f84919 (MyFirstObjectWalk: update recommended usage,
2022-03-09) changed a call of parse_list_objects_filter() in a way
that probably never worked: parse_list_objects_filter() always needed
a pointer as its first argument.
Fix this by removing the CALLOC_ARRAY and passing the address of
rev->filter to parse_list_objects_filter() in accordance to
such a call in revisions.c, for example.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects.c resides in builtin/ (not builtins/).
Fix the misspelled directory name.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a4e7e317f8 (config: add ctx arg to config_fn_t, 2023-06-28)
added a fourth argument to config_fn_t but did not change relevant
function calls in Documentation/MyFirstObjectWalk.txt.
Fix those calls and the example git_walken_config() to use
that additional argument.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.commentChar code recently learned to accept more than a
single ASCII character. But using it is annoying with multiple versions
of Git, since older ones will reject it outright:
$ git.v2.44.0 -c core.commentchar=foo stripspace -s
error: core.commentChar should only be one ASCII character
fatal: unable to parse 'core.commentchar' from command-line config
Let's add an alias core.commentString. That's arguably a better name
anyway, since we now can handle strings, and it makes it possible to
have a config that works reasonably with both old and new versions of
Git (see the example in the documentation).
This is strictly an alias, so there's not much point in adding duplicate
tests; I added a single one to t0030 that exercises the alias code.
Note also that the error messages for invalid values will now show the
variable the config parser handed us, and thus will be normalized to
lowercase (rather than camelcase). A few tests in t0030 are adjusted to
match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
