Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A large variety of rebase types are supported by the interactive
machinery, not just the explicitly interactive ones. These all share
the same code and write the same reflog messages, but the "-i" moniker
in those messages doesn't really have much meaning. It also becomes
somewhat distracting once we switch the default from the am-backend to
the interactive one. Just remove the "-i" from these messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the past, we dis-allowed rebases using the interactive backend from
performing a fast-forward to short-circuit the rebase operation. This
made sense for explicitly interactive rebases and some implicitly
interactive rebases, but certainly became overly stringent when the
merge backend was re-implemented via the interactive backend.
Just as the am-based rebase has always had to disable the fast-forward
based on a variety of conditions or flags (e.g. --signoff, --whitespace,
etc.), we need to do the same but now with a few more options. However,
continuing to use REBASE_FORCE for tracking this is problematic because
the interactive backend used it for a different purpose. (When
REBASE_FORCE wasn't set, the interactive backend would not fast-forward
the whole series but would fast-forward individual "pick" commits at the
beginning of the todo list, and then a squash or something would cause
it to start generating new commits.) So, introduce a new
allow_preemptive_ff flag contained within cmd_rebase() and use it to
track whether we are going to allow a pre-emptive fast-forward that
short-circuits the whole rebase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
restrict_revision in the original shell script was an excluded revision
range. It is also treated that way by the am-backend. In the
conversion from shell to C (see commit 6ab54d17be ("rebase -i:
implement the logic to initialize $revisions in C", 2018-08-28)), the
interactive-backend accidentally treated it as a positive revision
rather than a negated one.
This was missed as there were no tests in the testsuite that tested an
interactive rebase with fork-point behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_QUIET environment variable was used to signal the non-am
backends that the rebase should perform quietly. The preserve-merges
backend does not make use of the quiet flag anywhere (other than to
write out its state whenever it writes state), and this mechanism was
broken in the conversion from shell to C. Since this environment
variable was specifically designed for scripts and the only backend that
would still use it is no longer a script, just gut this code.
A subsequent commit will fix --quiet for the interactive/merge backend
in a different way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As established in the previous commit and commit b00bf1c9a8
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8 (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" (and friends) used to unnecessarily check out the
tip of the branch to be rebased, which has been corrected.
* ag/rebase-avoid-unneeded-checkout:
rebase -i: stop checking out the tip of the branch to rebase
One of the first things done when using a sequencer-based
rebase (ie. `rebase -i', `rebase -r', or `rebase -m') is to make a todo
list. This requires knowledge of the commit range to rebase. To get
the oid of the last commit of the range, the tip of the branch to rebase
is checked out with prepare_branch_to_be_rebased(), then the oid of the
head is read. After this, the tip of the branch is not even modified.
The `am' backend, on the other hand, does not check out the branch.
On big repositories, it's a performance penalty: with `rebase -i', the
user may have to wait before editing the todo list while git is
extracting the branch silently, and "quiet" rebases will be slower than
`am'.
Since we already have the oid of the tip of the branch in
`opts->orig_head', it's useless to switch to this commit.
This removes the call to prepare_branch_to_be_rebased() in
do_interactive_rebase(), and adds a `orig_head' parameter to
get_revision_ranges(). prepare_branch_to_be_rebased() is removed as it
is no longer used.
This introduces a visible change: as we do not switch on the tip of the
branch to rebase, no reflog entry is created at the beginning of the
rebase for it.
Unscientific performance measurements, performed on linux.git, are as
follow:
Before this patch:
$ time git rebase -m --onto v4.18 463fa44eec2fef50~ 463fa44eec2fef50
real 0m8,940s
user 0m6,830s
sys 0m2,121s
After this patch:
$ time git rebase -m --onto v4.18 463fa44eec2fef50~ 463fa44eec2fef50
real 0m1,834s
user 0m0,916s
sys 0m0,206s
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b00bf1c9a8 ("git-rebase: make --allow-empty-message the
default", 2018-06-27) made --allow-empty-message the default and thus
turned --allow-empty-message into a no-op but did not update the
documentation to reflect this. Update the documentation now, and hide
the option from the normal -h output since it is not useful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 5d9324e0f4, reversing
changes made to c58ae96fc4.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
"git rebase --signoff" stopped working when the command was written
in C, which has been corrected.
* en/rebase-signoff-fix:
rebase: fix saving of --signoff state for am-based rebases
This was an error introduced in the conversion from shell in commit
21853626ea ("built-in rebase: call `git am` directly", 2019-01-18),
which was noticed by a random browsing of the code.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" did not work well when format.useAutoBase
configuration variable is set, which has been corrected.
* dl/rebase-with-autobase:
rebase: fix format.useAutoBase breakage
format-patch: teach --no-base
t4014: use test_config()
format-patch: fix indentation
t3400: demonstrate failure with format.useAutoBase
Reduce unnecessary reading of state variables back from the disk
during sequencer operation.
* ag/sequencer-todo-updates:
sequencer: directly call pick_commits() from complete_action()
rebase: fill `squash_onto' in get_replay_opts()
sequencer: move the code writing total_nr on the disk to a new function
sequencer: update `done_nr' when skipping commands in a todo list
sequencer: update `total_nr' when adding an item to a todo list
"git rebase -i" learned a few options that are known by "git
rebase" proper.
* ra/rebase-i-more-options:
rebase -i: finishing touches to --reset-author-date
rebase: add --reset-author-date
rebase -i: support --ignore-date
sequencer: rename amend_author to author_to_rename
rebase -i: support --committer-date-is-author-date
sequencer: allow callers of read_author_script() to ignore fields
rebase -i: add --ignore-whitespace flag
With `format.useAutoBase = true`, running rebase resulted in an
error:
fatal: failed to get upstream, if you want to record base commit automatically,
please use git branch --set-upstream-to to track a remote branch.
Or you could specify base commit by --base=<base-commit-id> manually
error:
git encountered an error while preparing the patches to replay
these revisions:
ede2467cdedc63784887b587a61c36b7850ebfac..d8f581194799ae29bf5fa72a98cbae98a1198b12
As a result, git cannot rebase them.
Fix this by always passing `--no-base` to format-patch from rebase so
that the effect of `format.useAutoBase` is negated.
Reported-by: Christian Biesinger <cbiesinger@google.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the way the `--reset-author-date` option is described,
and mark its usage string translatable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sequencer_continue() is called by complete_action(), `opts' has
been filled by get_replay_opts(). Currently, it does not initialise the
`squash_onto' field (used by the `--root' mode), only
read_populate_opts() does. It’s not a problem yet since
sequencer_continue() calls it before pick_commits(), but it would lead
to incorrect results once complete_action() is modified to call
pick_commits() directly.
Let’s change that.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --preserve-merges" has been marked as deprecated; this
release stops advertising it in the "git rebase -h" output.
* js/rebase-deprecate-preserve-merges:
rebase: hide --preserve-merges option
The previous commit introduced --ignore-date flag to interactive
rebase, but the name is actually very vague in context of rebase -i
since there are two dates we can work with. Add an alias to convey
the precise purpose.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the author date
by changing it to the committer (current) date. Let's add the same
for interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase am already has this flag to "lie" about the committer date
by changing it to the author date. Let's add the same for
interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two backends available for rebasing, viz, the am and the
interactive. Naturally, there shall be some features that are
implemented in one but not in the other. One such flag is
--ignore-whitespace which indicates merge mechanism to treat lines
with only whitespace changes as unchanged. Wire the interactive
rebase to also understand the --ignore-whitespace flag by
translating it to -Xignore-space-change.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since --preserve-merges has been deprecated in favour of
--rebase-merges, mark this option as hidden so it no longer shows up in
the usage and completions.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --autostash <upstream> <branch>", when <branch> is
different from the current branch, incorrectly moved the tip of the
current branch, which has been corrected.
* bw/rebase-autostash-keep-current-branch:
builtin/rebase.c: Remove pointless message
builtin/rebase.c: make sure the active branch isn't moved when autostashing
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
When doing 'git rebase --autostash <upstream> <master>' with a dirty worktree
a 'HEAD is now at ...' message is emitted, which is pointless as it refers to
the old active branch which isn't actually moved.
This commit removes the 'HEAD is now at...' message.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following scenario:
git checkout not-the-master
work work work
git rebase --autostash upstream master
Here 'rebase --autostash <upstream> <branch>' incorrectly moves the
active branch (not-the-master) to master (before the rebase).
The expected behavior: (58794775:/git-rebase.sh:526)
AUTOSTASH=$(git stash create autostash)
git reset --hard
git checkout master
git rebase upstream
git stash apply $AUTOSTASH
The actual behavior: (6defce2b:/builtin/rebase.c:1062)
AUTOSTASH=$(git stash create autostash)
git reset --hard master
git checkout master
git rebase upstream
git stash apply $AUTOSTASH
This commit reinstates the 'legacy script' behavior as introduced with
58794775: rebase: implement --[no-]autostash and rebase.autostash
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we rebased with a --fork-point invocation where the
fork-point wasn't empty, we would be setting options.restrict_revision.
The fast-forward logic would automatically declare that the rebase was
not fast-forwardable if it was set. However, this was painting with a
very broad brush.
Refine the logic so that we can fast-forward in the case where the
restricted revision is equal to the merge base, since we stop rebasing
at the merge base anyway.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, can_fast_forward was written with an if-else statement. However,
in the future, we may be adding more termination cases which would lead
to deeply nested if statements.
Refactor to use a goto tower so that future cases can be easily
inserted.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing a complete commit history onto a given commit, it is
pretty obvious that the root commits should be rebased on top of said
given commit.
To test this, let's kill two birds with one stone and add a test case to
t3427-rebase-subtree.sh that not only demonstrates that this works, but
also that `git rebase -r` works with merge strategies now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support merge strategies in the sequencer, but only for
`pick` commands.
With this commit, we now also support them in `merge` commands. The
approach is simple: if any merge strategy option is specified, or if any
merge strategy other than `recursive` is specified, we simply spawn the
`git merge` command. Otherwise, we handle the merge in-process just as
before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining scripted part of `git rebase` is the
`--preserve-merges` backend. Meaning: there is little reason to keep the
"library of common rebase functions" as a separate file.
While moving the functions to `git-rebase--preserve-merges.sh`, we also
drop the `move_to_original_branch` function that is no longer used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 21853626ea (built-in rebase: call `git am` directly, 2019-01-18),
the built-in rebase already uses the built-in `git am` directly.
Now that d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18) even removed the scripted rebase, there is no longer any
user of `git-rebase--am.sh`, so let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
The configuration variable rebase.rescheduleFailedExec should be
effective only while running an interactive rebase and should not
affect anything when running an non-interactive one, which was not
the case. This has been corrected.
* js/rebase-reschedule-applies-only-to-interactive:
rebase --am: ignore rebase.rescheduleFailedExec
We skipped marking the "rebase" built-in as requiring a .git/ directory
and a worktree only to allow to spawn the scripted version of `git
rebase`.
Now that we no longer have that escape hatch, we can change that to the
canonical form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trailing space was inadvertently introduced in 9fbcc3d203 (Merge
branch 'js/rebase-orig-head-fix', 2019-03-20).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.
* nd/tree-walk-with-repo:
t7814: do not generate same commits in different repos
Use the right 'struct repository' instead of the_repository
match-trees.c: remove the_repo from shift_tree*()
tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
tree-walk.c: remove the_repo from get_tree_entry()
tree-walk.c: remove the_repo from fill_tree_descriptor()
sha1-file.c: remove the_repo from read_object_with_reference()
The configuration variable rebase.rescheduleFailedExec should be
effective only while running an interactive rebase and should not
affect anything when running an non-interactive one, which was not
the case. This has been corrected.
* js/rebase-reschedule-applies-only-to-interactive:
rebase --am: ignore rebase.rescheduleFailedExec
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
The `exec` command is specific to the interactive backend, therefore it
does not make sense for non-interactive rebases to heed that config
setting.
We still want to error out if a non-interactive rebase is started with
`--reschedule-failed-exec`, of course.
Reported by Vas Sudanagunta via:
https://github.com/git/git/commit/969de3ff0e0#commitcomment-33257187
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update supporting parts of "git rebase" to remove code that should
no longer be used.
* js/rebase-cleanup:
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bff014dac7 (builtin rebase: support the `verbose` and `diffstat`
options, 2018-09-04), we added a line that wanted to remove the
`REBASE_DIFFSTAT` bit from the flags, but it used an incorrect negation.
Found by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `rebase -r` finishes it removes any refs under refs/rewritten that
it has created. However if the user aborts or quits the rebase refs are
not removed. This can cause problems for future rebases. For example I
recently wanted to merge a updated version of a topic branch into an
integration branch so ran `rebase -ir` and removed the picks and label
for the topic branch from the todo list so that
merge -C <old-merge> topic
would pick up the new version of topic. Unfortunately
refs/rewritten/topic already existed from a previous rebase that had
been aborted so the rebase just used the old topic, not the new one.
The logic for the non-interactive quit case is changed to ensure
`buf` is always freed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase --quit cannot remove the state directory then it dies. However
when rebase finishes normally or the user runs rebase --abort any errors
that occur when removing the state directory are ignored. That is fixed
by this commit.
All of the callers of finish_rebase() except the code
that handles --abort are careful to make sure they get a postive return
value, do the same for --abort.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining scripted part of `git rebase` is the
`--preserve-merges` backend. Meaning: there is little reason to keep the
"library of common rebase functions" as a separate file.
While moving the functions to `git-rebase--preserve-merges.sh`, we also
drop the `move_to_original_branch` function that is no longer used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 21853626ea (built-in rebase: call `git am` directly, 2019-01-18),
the built-in rebase already uses the built-in `git am` directly.
Now that d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18) even removed the scripted rebase, there is no longer any
user of `git-rebase--am.sh`, so let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
When the builtin rebase starts an interactive rebase it parses the
options and then repackages them and forks
`rebase--interactive`. Separate the option parsing in
cmd_rebase__interactive() from the business logic to allow interactive
rebases can be run without forking `rebase__interactive` by calling
run_rebase_interactive() directly.
Starting interactive rebases without forking makes it easy to debug
the sequencer without worrying about attaching to child
processes. Ævar has also reported that some of the rebase perf tests
are 30% faster [1].
This patch also makes it easy to remove cmd_rebase__interactive() in
the future when git-legacy-rebase.sh and
git-rebase--preserve-merges.sh are retired.
[1] https://public-inbox.org/git/87y359cfjj.fsf@evledraar.gmail.com/
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_rebase() and cmd_rebase__interactive() used different enums to hold
the current action. Change to using a common enum so the values are the
same when we change `rebase -i` to avoid forking `rebase--interactive`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the parameters that are passed to do_interactive_rebase() apart from
`flags` are already in `struct rebase_options` so there is no need to
pass them separately.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to run `rebase -i` without forking `rebase--interactive` it
will be convenient to use the same structure when parsing the options in
cmd_rebase() and cmd_rebase__interactive().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More preparation for using `struct rebase_options` in
cmd_rebase__interactive(). Using a string was a hangover from the
scripted version of rebase, update the functions that use `squash_onto`
to take a `sturct object_id`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for using `struct rebase_options` when parsing
options in cmd_rebase__interactive(). Using a string for onto,
restrict_revision and upstream, was a hangover from the scripted version
of rebase. The functions that use these variables are updated to take a
`struct commit`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
path_state_dir() and merge_dir() refer to the same path so remove one of
them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to run `rebase -i` without forking `rebase--interactive` it
will be convenient to have all the code from rebase--interactive.c in
rebase.c. This is a straight forward copy of the code from
rebase--interactive.c, it will be simplified slightly in the next
commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we have a macro for this it makes sense to use it. Having
cmd_rebase() and cmd_rebase__interactive() use the same values for
this option will be helpful when we start running interactive rebases
without forking rebase--interactive.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit b3a5d5a80c ("trace2:data: add subverb for rebase", 2019-02-22)
mistakenly marked the subverb names for translation and unnecessarily
NULL terminated the array.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --rebase-merges" replaces its old "--preserve-merges"
option; the latter is now marked as deprecated.
* js/rebase-deprecate-preserve-merges:
rebase: deprecate --preserve-merges
Use oideq() instead of !oidcmp(), as it is more idiomatic, and might
give the compiler more opportunities to optimize.
Patch generated with 'contrib/coccinelle/free.cocci' and Coccinelle
v1.0.7 (previous Coccinelle versions don't notice this).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro FREE_AND_NULL to release memory allocated for
'head_name' and clear its pointer.
Patch generated with 'contrib/coccinelle/free.cocci' and Coccinelle
v1.0.7 (previous Coccinelle versions don't notice this).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Technically, the scripted version set ORIG_HEAD only in two spots (which
really could have been one, because it called `git checkout $onto^0` to
start the rebase and also if it could take a shortcut, and in both cases
it called `git update-ref $orig_head`).
Practically, it *implicitly* reset ORIG_HEAD whenever `git reset --hard`
was called.
However, what we really want is that it is set exactly once, at the
beginning of the rebase.
So let's do that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By mistake, we used the reflog intended for ORIG_HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case that the rebase boils down to a fast-forward, the built-in
rebase reset the working tree twice: once to start the rebase at `onto`,
then realizing that the original (pre-rebase) HEAD was an ancestor and
we basically already fast-forwarded to the post-rebase HEAD,
`reset_head()` was called to update the original ref and to point HEAD
back to it.
That second `reset_head()` call does not need to touch the working tree,
though, as it does not change the actual tip commit (and therefore the
working tree should stay unchanged anyway): only the ref needs to be
updated (because the rebase detached the HEAD, and we want to go back to
the branch on which the rebase was started).
But that second `reset_head()` was called without the flag to leave the
working tree alone (the reason: when that call was introduced, that flag
was not yet even thought of). Let's avoid that unnecessary work by
passing that flag.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
Instead of going through "git-rebase--am" scriptlet to use the "am"
backend, the built-in version of "git rebase" learned to drive the
"am" backend directly.
* js/rebase-am:
built-in rebase: call `git am` directly
rebase: teach `reset_head()` to optionally skip the worktree
rebase: avoid double reflog entry when switching branches
rebase: move `reset_head()` into a better spot
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
This patch was contributed only as a tentative "we could introduce a
convenient short option if we do not want to change the default behavior
in the long run" patch, opening the discussion whether other people
agree with deprecating the current behavior in favor of the rescheduling
behavior.
But the consensus on the Git mailing list was that it would make sense
to show a warning in the near future, and flip the default
rebase.rescheduleFailedExec to reschedule failed `exec` commands by
default. See e.g.
<CAGZ79kZL5CRqCDRb6B-EedUm8Z_i4JuSF2=UtwwdRXMitrrOBw@mail.gmail.com>
So let's back out that patch that added the `-y` short option that we
agreed was not necessary or desirable.
This reverts commit 81ef8ee75d.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_SEQUENCE_EDITOR is set, the command was incorrectly
started when modes of "git rebase" that implicitly uses the
machinery for the interactive rebase are run, which has been
corrected.
* pw/no-editor-in-rebase-i-implicit:
implicit interactive rebase: don't run sequence editor
If the user gives an empty argument to --exec then git creates a todo
list that it cannot parse. The rebase starts to run before erroring out
with
error: missing arguments for exec
error: invalid line 2: exec
You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
Or you can abort the rebase with 'git rebase --abort'.
Instead check for empty commands before starting the rebase.
Also check that the command does not contain any newlines as the
todo-list format is unable to cope with multiline commands. Note that
this changes the behavior, before this change one could do
git rebase --exec='echo one
exec echo two'
and it would insert two exec lines in the todo list, now it will error
out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" internally runs "checkout" to switch between branches,
and the command used to call the post-checkout hook, but the
reimplementation stopped doing so, which is getting fixed.
* os/rebase-runs-post-checkout-hook:
rebase: run post-checkout hook on checkout
t5403: simplify by using a single repository
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
If GIT_SEQUENCE_EDITOR is set then rebase runs it when executing
implicit interactive rebases which are supposed to appear
non-interactive to the user. Fix this by setting GIT_SEQUENCE_EDITOR=:
rather than GIT_EDITOR=:. A couple of tests relied on the old behavior
so they are updated to work with the new regime.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the scripted `git rebase` still has to rely on the
`git-rebase--am.sh` script to implement the glue between the `rebase`
and the `am` commands, we can go a more direct route in the built-in
rebase and avoid using a shell script altogether.
This patch represents a straight-forward port of `git-rebase--am.sh` to
C, along with the glue code to call it directly from within
`builtin/rebase.c`.
This reduces the chances of Git for Windows running into trouble due to
problems with the POSIX emulation layer (known as "MSYS2 runtime",
itself a derivative of the Cygwin runtime): when no shell script is
called, the POSIX emulation layer is avoided altogether.
Note: we pass an empty action to `reset_head()` here when moving back to
the original branch, as no other action is applicable, really. This
parameter is used to initialize `unpack_trees()`' messages.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is what the legacy (scripted) rebase does in
`move_to_original_branch`, and we will need this functionality in the
next commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching a branch *and* updating said branch to a different
revision, let's avoid a double entry in HEAD's reflog by first updating
the branch and then adjusting the symbolic ref HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the next commits, we want to make use of it in `run_am()` (i.e.
running the `--am` backend directly, without detouring to Unix shell
script code) which in turn will be called from `run_specific_rebase()`.
So let's move it before that latter function.
This commit is best viewed using --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of rebase used to run this hook on the initial
checkout. The transition to built-in introduced a regression.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'quiet' and 'interactive' may sound like antonyms, the interactive
machinery actually has logic that implements several
interactive_rebase=implied cases (--exec, --keep-empty, --rebase-merges)
which won't pop up an editor. The rewrite of interactive rebase in C
added a quiet option, though it only turns stats off. Since we want to
make the interactive machinery also take over for git-rebase--merge, it
should fully implement the --quiet option.
git-rebase--interactive was already somewhat quieter than
git-rebase--merge and git-rebase--am, possibly because cherry-pick has
just traditionally been quieter. As such, we only drop a few
informational messages -- "Rebasing (n/m)" and "Successfully rebased..."
Also, for simplicity, remove the differences in how quiet and verbose
options were recorded. Having one be signalled by the presence of a
"verbose" file in the state_dir, while the other was signalled by the
contents of a "quiet" file was just weirdly inconsistent. (This
inconsistency pre-dated the rewrite into C.) Make them consistent by
having them both key off the presence of the file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit f57696802c ("rebase: really just passthru the `git am`
options", 2018-11-14), the handling of `git am` options was simplified
dramatically (and an option parsing bug was fixed), but it introduced
a small regression in the error message shown when options only
understood by separate backends were used:
$ git rebase --keep --ignore-whitespace
fatal: cannot combine interactive options (--interactive, --exec,
--rebase-merges, --preserve-merges, --keep-empty, --root + --onto) with
am options (.git/rebase-apply/applying)
$ git rebase --merge --ignore-whitespace
fatal: cannot combine merge options (--merge, --strategy,
--strategy-option) with am options (.git/rebase-apply/applying)
Note that in both cases, the list of "am options" is
".git/rebase-apply/applying", which makes no sense. Since the lists of
backend-specific options is documented pretty thoroughly in the rebase
man page (in the "Incompatible Options" section, with multiple links
throughout the document), and since I expect this list to change over
time, just simplify the error message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion of the script version of rebase took messages that were
prefixed with "error:" and passed them along to die(), which adds a
"fatal:" prefix, thus resulting in messages of the form:
fatal: error: cannot combine...
which seems redundant. Remove the "error:" prefix from the builtin
version of rebase, and change the prefix from "error:" to "fatal:" in
the legacy script to match.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a bit cumbersome to write out the `--reschedule-failed-exec`
option before `-x <cmd>` all the time; let's introduce a convenient
option to do both at the same time: `-y <cmd>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It would be cumbersome to type out that option all the time, so let's
offer the convenience of a config setting: rebase.rescheduleFailedExec.
Besides, this opens the door to changing the default in a future version
of Git: it does make some sense to reschedule failed `exec` commands by
default (and if we could go back in time when the `exec` command was
invented, we probably would change that default right from the start).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common use case for the `--exec` option is to verify that each commit
in a topic branch compiles cleanly, via `git rebase -x make <base>`.
However, when an `exec` in such a rebase fails, it is not re-scheduled,
which in this instance is not particularly helpful.
Let's offer a flag to reschedule failed `exec` commands.
Based on an idea by Paul Morelle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --stat" to transplant a piece of history onto a totally
unrelated history were not working before and silently showed wrong
result. With the recent reimplementation in C, it started to instead
die with an error message, as the original logic was not prepared
to cope with this case. This has now been fixed.
* js/rebase-stat-unrelated-fix:
rebase --stat: fix when rebasing to an unrelated history
The whitespace breakages in these messages were introduced while
reimplementing the subcommand in C. Match these messages to those
in the original scripted version.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing to a commit history that has no common commits with the
current branch, there is no merge base. In diffstat mode, this means
that we cannot compare to the merge base, but we have to compare to the
empty tree instead.
Also, if running in verbose diffstat mode, we should not output
Changes from <merge-base> to <onto>
as that does not make sense without any merge base.
Note: neither scripted nor built-in versoin of `git rebase` were
prepared for this situation well. We use this opportunity not only to
fix the bug(s), but also to make both versions' output consistent in
this instance. And add a regression test to keep this working in all
eternity.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of "rebase" honored the `GIT_REFLOG_ACTION`,
and some automation scripts expected the reflog entries to be
prefixed with "rebase -i", not "rebase", after running "rebase -i".
This regressed in the reimplementation in C.
Fix that, and add a regression test, both with `GIT_REFLOG_ACTION`
set and unset.
Note: the reflog message for "rebase finished" did *not* honor
GIT_REFLOG_ACTION, and as we are very late in the v2.20.0-rcN phase,
we leave that bug for later (as it seems that that bug has been with
us from the very beginning).
Reported by Ian Jackson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object name of the tree reported in a recently added error
message was wrong, which has been corrected.
* js/builtin-rebase-perf-fix-err-fix:
rebase: warn about the correct tree's OID
This was a simple copy/paste error, and an obvious one at that: if we
cannot fill the tree descriptor, we should show an error message about
*that* tree, not another one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently merged "rebase in C" has an escape hatch to use the
scripted version when necessary, but it hasn't been documented,
which has been corrected.
* ab/rebase-in-c-escape-hatch:
tests: add a special setup where rebase.useBuiltin is off
rebase doc: document rebase.useBuiltin
The way "git rebase" parses and forwards the command line options
meant for underlying "git am" has been revamped, which fixed for
options with parameters that were not passed correctly.
* js/rebase-am-options:
rebase: validate -C<n> and --whitespace=<mode> parameters early
rebase: really just passthru the `git am` options
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
Code clean-up with correction to make the reimplemented "git
rebase" a more faithful rewrite of the original, which also regains
performance.
* js/builtin-rebase-perf-fix:
built-in rebase: reinstate `checkout -q` behavior where appropriate
rebase: prepare reset_head() for more flags
rebase: consolidate clean-up code before leaving reset_head()
"git rebase --autostash" did not correctly re-attach the HEAD at times.
* js/rebase-autostash-detach-fix:
built-in rebase --autostash: leave the current branch alone if possible
built-in rebase: demonstrate regression with --autostash
Add a GIT_TEST_REBASE_USE_BUILTIN=false test mode which is equivalent
to running with rebase.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy rebase version
while we're carrying both it and the new builtin version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good idea to error out early upon seeing, say, `-Cbad`, rather
than starting the rebase only to have the `--am` backend complain later.
Let's do this.
The only options accepting parameters which we pass through to `git am`
(which may, or may not, forward them to `git apply`) are `-C` and
`--whitespace`. The other options we pass through do not accept
parameters, so we do not have to validate them here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we parse the options intended for `git am` as if we wanted to
handle them in `git rebase`, and then reconstruct them painstakingly to
define the `git_am_opt` variable.
However, there is a much better way (that I was unaware of, at the time
when I mentored Pratik to implement these options): OPT_PASSTHRU_ARGV.
It is intended for exactly this use case, where command-line options
want to be parsed into a separate `argv_array`.
Let's use this feature.
Incidentally, this also allows us to address a bug discovered by Phillip
Wood, where the built-in rebase failed to understand that the `-C`
option takes an optional argument.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we converted a `git checkout -q $onto^0` call to use
`reset_head()`, we inadvertently incurred a change from a twoway_merge
to a oneway_merge, as if we wanted a `git reset --hard` instead.
This has performance ramifications under certain, though, as the
oneway_merge needs to lstat() every single index entry whereas
twoway_merge does not.
So let's go back to the old behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we only accept the flag indicating whether the HEAD should be
detached not. In the next commit, we want to introduce another flag: to
toggle between emulating `reset --hard` vs `checkout -q`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same clean-up code is repeated quite a few times; Let's DRY up the
code some.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of the rebase used to execute `git reset --hard`
when skipping or aborting. When we ported this to C, we did update the
worktree and some reflogs, but we failed to imitate `git reset --hard`'s
behavior regarding files in .git/ such as MERGE_HEAD.
Let's address this oversight.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we converted a `git reset --hard` call in the original Unix shell
script to built-in code, we asked to reset the worktree and the index
and explicitly *not* to detach the HEAD. By mistake, though, we still
did. Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" that has recently been rewritten in C had a few issues
in its "--autstash" feature, which have been corrected.
* js/rebase-autostash-fix:
rebase --autostash: fix issue with dirty submodules
rebase --autostash: demonstrate a problem with dirty submodules
rebase (autostash): use an explicit OID to apply the stash
rebase (autostash): store the full OID in <state-dir>/autostash
rebase (autostash): avoid duplicate call to state_dir_path()
"rebase" that has been rewritten learns the new calling convention
used by "rebase -i" that was rewritten in C, tying the loose end
between two GSoC topics that stomped on each other's toes.
* js/rebase-in-c-5.5-work-with-rebase-i-in-c:
builtin rebase: prepare for builtin rebase -i
Rewrite "git rebase" in C.
* pk/rebase-in-c-5-test:
builtin rebase: error out on incompatible option/mode combinations
builtin rebase: use no-op editor when interactive is "implied"
builtin rebase: show progress when connected to a terminal
builtin rebase: fast-forward to onto if it is a proper descendant
builtin rebase: optionally pass custom reflogs to reset_head()
builtin rebase: optionally auto-detect the upstream
Rewrite "git rebase" in C.
* pk/rebase-in-c-4-opts:
builtin rebase: support --root
builtin rebase: add support for custom merge strategies
builtin rebase: support `fork-point` option
merge-base --fork-point: extract libified function
builtin rebase: support --rebase-merges[=[no-]rebase-cousins]
builtin rebase: support `--allow-empty-message` option
builtin rebase: support `--exec`
builtin rebase: support `--autostash` option
builtin rebase: support `-C` and `--whitespace=<type>`
builtin rebase: support `--gpg-sign` option
builtin rebase: support `--autosquash`
builtin rebase: support `keep-empty` option
builtin rebase: support `ignore-date` option
builtin rebase: support `ignore-whitespace` option
builtin rebase: support --committer-date-is-author-date
builtin rebase: support --rerere-autoupdate
builtin rebase: support --signoff
builtin rebase: allow selecting the rebase "backend"
Rewrite "git rebase" in C.
* pk/rebase-in-c-3-acts:
builtin rebase: stop if `git am` is in progress
builtin rebase: actions require a rebase in progress
builtin rebase: support --edit-todo and --show-current-patch
builtin rebase: support --quit
builtin rebase: support --abort
builtin rebase: support --skip
builtin rebase: support --continue
Rewrite "git rebase" in C.
* pk/rebase-in-c-2-basic:
builtin rebase: support `git rebase <upstream> <switch-to>`
builtin rebase: only store fully-qualified refs in `options.head_name`
builtin rebase: start a new rebase only if none is in progress
builtin rebase: support --force-rebase
builtin rebase: try to fast forward when possible
builtin rebase: require a clean worktree
builtin rebase: support the `verbose` and `diffstat` options
builtin rebase: support --quiet
builtin rebase: handle the pre-rebase hook and --no-verify
builtin rebase: support `git rebase --onto A...B`
builtin rebase: support --onto
Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The separator between words in a multi-word option name is a dash,
not an underscore.
Inspired by a matching change by Ralf Thielow for the scripted
version of "git rebase".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the builtin rebase is feature-complete, we should use it by
default. Let's keep the legacy scripted version around for the time
being; Once the builtin rebase is well-tested enough, we can remove
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin rebase and the builtin interactive rebase have been
developed independently, on purpose: Google Summer of Code rules
specifically state that students have to work on independent projects,
they cannot collaborate on the same project.
One fallout is that the rebase-in-c and rebase-i-in-c patches cause no
merge conflicts but a royal number of tests in the test suite to fail.
It is easy to explain why: rebase-in-c was developed under the
assumption that all rebase backends are implemented in Unix shell script
and can be sourced via `. git-rebase--<backend>`, which is no longer
true with rebase-i-in-c, where git-rebase--interactive is a hard-linked
builtin.
This patch fixes that.
Please note that we also skip the finish_rebase() call for interactive
rebases because the built-in interactive rebase already takes care of
that. This is needed to support the upcoming `break` command that wants
to interrupt the rebase with exit code 0 (and naturally wants to keep
the state directory intact when doing so).
While at it, remove the `case` arm for the interactive rebase that is
now skipped in favor of the short-cut to the built-in rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the GSoC project to convert the rebase command to a
builtin, the rebase command learned to error out on certain command-line
option combinations that cannot work, such as --whitespace=fix with
--interactive.
This commit converts that code.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some options are only handled by the git-rebase--interactive backend,
even if run non-interactively. For this awkward situation (run
non-interactively, but use the interactive backend), the shell scripted
version of `git rebase` introduced the concept of an "implied
interactive rebase". All it does is to replace the editor by a dummy one
(`:` is the Unix command that takes arbitrary command-line parameters,
ignores them and simply exits with success).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we pass `--progress` to the `format-patch` command if
stderr is connected to an interactive terminal, unless we're in quiet
mode.
This `--progress` option will be used in `format-patch` to show progress
reports on stderr as patches are generated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to rebase onto a direct descendant of HEAD, we can
take a shortcut and fast-forward instead. This commit makes it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will make use of that in the code that
fast-forwards to `onto` whenever possible.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git rebase` command, when called without the `<upstream>`
command-line argument, automatically looks for the upstream
branch configured for the current branch.
With this commit, the builtin rebase learned that trick, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows to rebase entire histories up to, and including, the
root commit.
The conversion from the shell script is straight-forward, apart from
the fact that we do not have to write an empty tree in C.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a rebase in non-am mode, it uses the recursive merge to
cherry-pick the commits, and the rebase command allows to configure
the merge strategy to be used in this operation.
This commit adds that support to the builtin rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--fork-point` and `--no-fork-point`.
This is converted as-is from `git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mode to rebase non-linear branches is now supported by the builtin
rebase, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the `--allow-empty-message` option to
`builtin/rebase.c`. The motivation behind this option is: if there are
empty messages (which is not allowed in Git by default, but can be
imported from different version control systems), the rebase will fail.
Using `--allow-empty-message` overrides that behaviour which will allow
the commits having empty messages to continue in rebase operation.
Note: a very recent change made this the default in the shell scripted
`git rebase`, therefore the builtin rebase does the same.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--exec` option which takes a shell
command-line as argument. This argument will be appended as an `exec
<cmd>` command after each line in the todo list that creates a commit in
the final history. commands.
Note: while the shell script version of `git rebase` assigned the empty
string to `cmd` by default, we *unset* it here because the code looks
nicer and it does not change the behavior.
The `--exec` option requires `--interactive` machinery.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support `--autostash` we introduce a function `apply_autostash()`
just like in `git-legacy-rebase.sh`.
Rather than refactoring and using the same function that exists in
`sequencer.c`, we go a different route here, to avoid clashes with
the sister GSoC project that turns the interactive rebase into a
builtin.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit converts more code from the shell script version to the
builtin rebase. In this instance, we just have to be careful to
keep support for passing multiple `--whitespace` options, as the
shell script version does so, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for `--gpg-sign` option which is used
to GPG-sign commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--autosquash` option which is used to
automatically squash the commits marked as `squash` or `fixup` in their
messages. This is converted following `git-legacy-rebase.sh` closely.
This option can also be configured via the Git config setting
rebase.autosquash. To support this, we also add a custom
rebase_config() function in this commit that will be used instead (and
falls back to) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--keep-empty` option can be used to keep the commits that do not
change anything from its parents in the result.
While the scripted version uses `interactive_rebase=implied` to indicate
that the rebase needs to use the `git-rebase--interactive` backend in
non-interactive mode as fallback when figuring out which backend to use,
the C version needs to use a different route because the backend will
already be chosen during the `parse_options()` call.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--ignore-date` which is passed to `git am`
to easily change the dates of the rebased commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--ignore-whitespace` option
of the rebase command. This option is simply passed to the
`--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is simply handed down to `git am` by way of setting the
`git_am_opt` variable that is handled by the `git-rebase--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--rerere-autoupdate` option allows rerere to update the index with
resolved conflicts. This commit follows closely the equivalent part of
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--signoff` which is used to add a
`Signed-off-by` trailer to all the rebased commits. The actual
handling is left to the rebase backends.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this commit the builtin rebase supports selecting the "rebase
backends" (or "type") `interactive`, `preserve-merges`, and `merge`.
The `state_dir` was already handled according to the rebase type in a
previous commit.
Note that there is one quirk in the shell script: `--interactive`
followed by `--merge` won't reset the type to "merge" but keeps the type
as "interactive". And as t3418 tests this explicitly, we have to support
it in the builtin rebase, too.
Likewise, `--interactive` followed by `--preserve-merges` makes it an
"explicitly interactive" rebase, i.e. a rebase that should show the todo
list, while `--preserve-merges` alone is not interactive (and t5520
tests for this via `git pull --rebase=preserve`).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit checks for the file `applying` used by `git am` in
`rebase-apply/` and if the file is present it means `git am` is in
progress so it errors out.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prevents actions (such as --continue, --skip) from running
when there is no rebase in progress.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While these sub-commands are very different in spirit, their
implementation is almost identical, so we convert them in one go.
And since those are the last sub-commands that needed to be converted,
now we can also turn that `default:` case into a bug (because we should
now handle all the actions).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, the builtin rebase handles the `--quit` action which
can be used to abort a rebase without rolling back any changes performed
during the rebase (this is useful when a user forgot that they were in
the middle of a rebase and continued working normally).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches the builtin rebase the "abort" action, which a user
can call to roll back a rebase that is in progress.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the option `--skip` which is used to restart
rebase after skipping the current patch.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the option `--continue` which is used to resume
rebase after merge conflicts. The code tries to stay as close to
the equivalent shell scripts found in `git-legacy-rebase.sh` as
possible.
When continuing a rebase, the state variables are read from state_dir.
Some of the state variables are not actually stored there, such as
`upstream`. The shell script version simply does not set them, but for
consistency, we unset them in the builtin version.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `switch-to` which is used to switch to the
target branch if needed. The equivalent codes found in shell script
`git-legacy-rebase.sh` is converted to builtin `rebase.c`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a rebase on a detached HEAD, we currently store the string
"detached HEAD" in options.head_name. That is a faithful translation of
the shell script version, and we still kind of need it for the purposes of
the scripted backends.
It is poor style for C, though, where we would really only want a valid,
fully-qualified ref name as value, and NULL for detached HEADs, using
"detached HEAD" for display only. Make it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To run a new rebase, there needs to be a check to assure that no other
rebase is in progress. New rebase operation cannot start until an
ongoing rebase operation completes or is terminated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to `--force-rebase` option. The
equivalent part of the shell script found in `git-legacy-rebase.sh` is
converted as faithfully as possible to C.
The --force-rebase option ensures that the rebase does not simply
fast-forward even if it could.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to fast forward.
Note: we will need the merge base later, therefore the call to
can_fast_forward() really needs to be the first one when testing whether
we can skip the rebase entirely (otherwise, it would make more sense to
skip the possibly expensive operation if, say, running an interactive
rebase).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit reads the index of the repository for rebase and checks
whether the repository is ready for rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for the `-v` and `--stat` options of
rebase.
The --stat option can also be configured via the Git config setting
rebase.stat. To support this, we also add a custom rebase_config()
function in this commit that will be used instead of (and falls back to
calling) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces a rebase option `--quiet`. While `--quiet` is
commonly perceived as opposite to `--verbose`, this is not the case for
the rebase command: both `--quiet` and `--verbose` default to `false` if
neither `--quiet` nor `--verbose` is present.
Despite the default being `false` for both verbose and quiet mode,
passing the `--quiet` option will turn off verbose mode, and `--verbose`
will turn off quiet mode.
This patch introduces the `flags` bit field, with `REBASE_NO_QUIET`
as first user (with many more to come).
We do *not* use `REBASE_QUIET` here for an important reason: To keep the
implementation simple, this commit introduces `--no-quiet` instead of
`--quiet`, so that a single `OPT_NEGBIT()` can turn on quiet mode and
turn off verbose and diffstat mode at the same time. Likewise, the
companion commit which will introduce support for `--verbose` will have
a single `OPT_BIT()` that turns off quiet mode and turns on verbose and
diffstat mode at the same time.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit converts the equivalent part of the shell script
`git-legacy-rebase.sh` to run the pre-rebase hook (unless disabled), and
to interrupt the rebase with error if the hook fails.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements support for an --onto argument that is actually a
"symmetric range" i.e. `<rev1>...<rev2>`.
The equivalent shell script version of the code offers two different
error messages for the cases where there is no merge base vs more than
one merge base.
Though it would be nice to retain this distinction, dropping it makes it
possible to simply use the `get_oid_mb()` function. Besides, it happens
rarely in real-world scenarios.
Therefore, in the interest of keeping the code less complex, let's just
use that function, and live with an error message that does not
distinguish between those two error conditions.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--onto` option is important, as it allows to rebase a range of
commits onto a different base commit (which gave the command its odd
name: "rebase").
This commit introduces options parsing so that different options can
be added in future commits.
Note: As this commit introduces to the parse_options() call (which
"eats" argv[0]), the argc is now expected to be lower by one after this
patch, compared to before this patch: argv[0] no longer refers to the
command name, but to the first (non-option) command-line parameter.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch gives life to the skeleton added in the previous patches:
With this change, we can perform a elementary rebase (without any
options).
It can be tested thusly by:
git -c rebase.usebuiltin=true rebase HEAD~2
The rebase backends (i.e. the shell script functions defined in
`git-rebase--<backend>`) are still at work here and the "builtin
rebase"'s purpose is simply to parse the options and set
everything up so that those rebase backends can do their work.
Note: We take an alternative approach here which is *not* to set the
environment variables via `run_command_v_opt_cd_env()` because those
variables would then be visible by processes spawned from the rebase
backends. Instead, we work hard to set them in the shell script snippet.
On Windows, some of the tests fail merely due to core.fileMode not
being heeded that's why the core.*config variables is parsed here.
The `reset_head()` function is currently only used to detach the HEAD
to onto by way of starting the rebase, but it offers additional
functionality that subsequent patches will need like moving to the
original branch (possibly updating it) and also to do the equivalent of
`git reset --hard`.
The next commits will handle and support all the wonderful rebase
options.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>