Running tests under helgrind and DRD recently proved useful in
tracking down thread interaction issues. This can unfortunately not
be done through GIT_VALGRIND_OPTIONS because any tool other than
memcheck would complain about unknown options.
Let --valgrind take an optional parameter that describes the valgrind
tool to invoke. The default mode is to run memcheck as before.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed in 3da9365 (Tests: let --valgrind imply --verbose and
--tee, 2009-02-04).
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bulk-update of the test suite.
* yd/use-test-config-unconfig:
t5520: use test_config to set/unset git config variables (leftover bits)
t7600: use test_config to set/unset git config variables
t7502: remove clear_config
t7502: use test_config to set/unset git config variables
t9500: use test_config to set/unset git config variables
t7508: use test_config to set/unset git config variables
t7500: use test_config to set/unset git config variables
t5541: use test_config to set/unset git config variables
t5520: use test_config to set/unset git config variables
t4202: use test_config/test_unconfig to set/unset git config variables
t4034: use test_config/test_unconfig to set/unset git config variables
t4304: use test_config to set/unset git config variables
t3400: use test_config to set/unset git config variables
Allow the revision "slop" code to look deeper while commits with
exactly the same timestamps come next to each other (which can
often happen after a large "am" and "rebase" session).
* kk/revwalk-slop-too-many-commit-within-a-second:
Fix revision walk for commits with the same dates
The --simplify-merges logic did not cull irrelevant parents from a
merge that is otherwise not interesting with respect to the paths
we are following.
This touches a fairly core part of the revision traversal
infrastructure; even though I think this change is correct, please
report immediately if you find any unintended side effect.
* jc/remove-treesame-parent-in-simplify-merges:
simplify-merges: drop merge from irrelevant side branch
Codepath to stream blob object contents directly from the object
store to filesystem did not use the correct path to find conversion
filters when writing to temporary files.
* jk/checkout-attribute-lookup:
t2003: work around path mangling issue on Windows
entry: fix filter lookup
t2003: modernize style
"git difftool --dir-diff" made symlinks to working tree files when
preparing a temporary directory structure, so that accidental edits
of these files in the difftool are reflected back to the working
tree, but the logic to decide when to do so was not quite right.
* jk/difftool-dir-diff-edit-fix:
difftool --dir-diff: symlink all files matching the working tree
difftool: avoid double slashes in symlink targets
git-difftool(1): fix formatting of --symlink description
Configuration from test_config does not last beyond the end of the
current test assertion, making each test easier to think about in
isolation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "diff --cc" output to honor options to ignore various forms
of whitespace changes.
* ap/combine-diff-ignore-whitespace:
Allow combined diff to ignore white-spaces
Not that we do not actively encourage having annotated tags outside
refs/tags/ hierarchy, but they were not advertised correctly to the
ls-remote and fetch with recent version of Git.
* jk/fully-peeled-packed-ref:
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
Recent optimization broke shallow clones.
* jk/peel-ref:
upload-pack: load non-tip "want" objects from disk
upload-pack: make sure "want" objects are parsed
upload-pack: drop lookup-before-parse optimization
"git tag -f <tag>" always said "Updated tag '<tag>'" even when
creating a new tag (i.e. not overwriting nor updating).
* ph/tag-force-no-warn-on-creation:
tag: --force does not have to warn when creating tags
"git p4" did not behave well when the path to the root of the P4
client was not its real path.
* pw/p4-symlinked-root:
git p4: avoid expanding client paths in chdir
git p4 test: should honor symlink in p4 client root
git p4 test: make sure P4CONFIG relative path works
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in
the middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
The logic used by "git diff -M --stat" to shorten the names of
files before and after a rename did not work correctly when the
common prefix and suffix between the two filenames overlapped.
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
Teach "git pull --rebase" to pass "-v/-q" command line options to
underlying "git rebase".
* pe/pull-rebase-v-q:
pull: Apply -q and -v options to rebase mode as well
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume default configuration at entry,
and to reset the modified configuration variables at the end.
Test 'merge log message' was relying on the presence of option `--no-ff`
in the configuration. With the option, git show -s --pretty=format:%b HEAD
produces an empty line and without the option, it produces an empty file.
The test is modified to check with and without `--no-ff` option.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using test_config ensure the configuration variable are removed
at the end of the test, there's no need to remove variable
at the beginning of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update", when recursed into sub-submodules, did not
acccumulate the prefix paths.
* we/submodule-update-prefix-output:
submodule update: when using recursion, show full path
When export-subst is used, "zip" output recorded incorrect
size of the file.
* rs/zip-compresssed-size-with-export-subst:
archive-zip: fix compressed size for stored export-subst files
Fix tests that contaminated their environments and affected new
tests introduced later in the sequence by containing their effects
in their own subshells.
* rt/commit-cleanup-config:
t7502: perform commits using alternate editor in a subshell
"git branch" had more cases where it did not bother to check
nonsense command line parameters.
* nd/branch-error-cases:
branch: segfault fixes and validation
Minor maintenance updates to difftool, and updates to its tests.
* da/difftool-fixes:
t7800: "defaults" is no longer a builtin tool name
t7800: modernize tests
t7800: update copyright notice
difftool: silence uninitialized variable warning
'git commit -m "$str"' when $str was already terminated with a LF
now avoids adding an extra LF to the message.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
"git count-objects -v" did not count leftover temporary packfiles
and other kinds of garbage.
* nd/count-garbage:
count-objects: report how much disk space taken by garbage files
count-objects: report garbage files in pack directory too
sha1_file: reorder code in prepare_packed_git_one()
git-count-objects.txt: describe each line in -v output
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
MSYS bash considers the part "/g" in the sed expression "s/./=/g" as an
absolute path after an assignment, and mangles it to a C:/something
string. Do not attract bash's attention by avoiding the equals sign.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
test_config() is already a well-defined function in
test-lib-functions.sh. Don't duplicate it unnecessarily.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of pack-refs did not write peel lines for
refs outside of refs/tags. This meant that on reading the
pack-refs file, we might set the REF_KNOWS_PEELED flag for
such a ref, even though we do not know anything about its
peeled value.
The previous commit updated the writer to always peel, no
matter what the ref is. That means that packed-refs files
written by newer versions of git are fine to be read by both
old and new versions of git. However, we still have the
problem of reading packed-refs files written by older
versions of git, or by other implementations which have not
yet learned the same trick.
The simplest fix would be to always unset the
REF_KNOWS_PEELED flag for refs outside of refs/tags that do
not have a peel line (if it has a peel line, we know it is
valid, but we cannot assume a missing peel line means
anything). But that loses an important optimization, as
upload-pack should not need to load the object pointed to by
refs/heads/foo to determine that it is not a tag.
Instead, we add a "fully-peeled" trait to the packed-refs
file. If it is set, we know that we can trust a missing peel
line to mean that a ref cannot be peeled. Otherwise, we fall
back to assuming nothing.
[commit message and tests by Jeff King <peff@peff.net>]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Syntax branchname@{upstream} should interpret its argument as a name of
a branch. Add the test to check that it doesn't try to interpret it as a
refname if the branch in question does not exist.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
