Git authentication with OAuth access token is supported by every popular
Git host including GitHub, GitLab and BitBucket [1][2][3]. Credential
helpers Git Credential Manager (GCM) and git-credential-oauth generate
OAuth credentials [4][5]. Following RFC 6749, the application prints a
link for the user to authorize access in browser. A loopback redirect
communicates the response including access token to the application.
For security, RFC 6749 recommends that OAuth response also includes
expiry date and refresh token [6]. After expiry, applications can use
the refresh token to generate a new access token without user
reauthorization in browser. GitLab and BitBucket set the expiry at two
hours [2][3]. (GitHub doesn't populate expiry or refresh token.)
However the Git credential protocol has no attribute to store the OAuth
refresh token (unrecognised attributes are silently discarded). This
means that the user has to regularly reauthorize the helper in browser.
On a browserless system, this is particularly intrusive, requiring a
second device.
Introduce a new attribute oauth_refresh_token. This is especially
useful when a storage helper and a read-only OAuth helper are configured
together. Recall that `credential fill` calls each helper until it has a
non-expired password.
```
[credential]
helper = storage # eg. cache or osxkeychain
helper = oauth
```
The OAuth helper can use the stored refresh token forwarded by
`credential fill` to generate a fresh access token without opening the
browser. See
https://github.com/hickford/git-credential-oauth/pull/3/files
for an implementation tested with this patch.
Add support for the new attribute to credential-cache. Eventually, I
hope to see support in other popular storage helpers.
Alternatives considered: ask helpers to store all unrecognised
attributes. This seems excessively complex for no obvious gain.
Helpers would also need extra information to distinguish between
confidential and non-confidential attributes.
Workarounds: GCM abuses the helper get/store/erase contract to store the
refresh token during credential *get* as the password for a fictitious
host [7] (I wrote this hack). This workaround is only feasible for a
monolithic helper with its own storage.
[1] https://github.blog/2012-09-21-easier-builds-and-deployments-using-git-over-https-and-oauth/
[2] https://docs.gitlab.com/ee/api/oauth2.html#access-git-over-https-with-access-token
[3] https://support.atlassian.com/bitbucket-cloud/docs/use-oauth-on-bitbucket-cloud/#Cloning-a-repository-with-an-access-token
[4] https://github.com/GitCredentialManager/git-credential-manager
[5] https://github.com/hickford/git-credential-oauth
[6] https://datatracker.ietf.org/doc/html/rfc6749#section-5.1
[7] 66b94e489a/src/shared/GitLab/GitLabHostProvider.cs (L207)
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --local" stops copying from an original repository that
has symbolic links inside its $GIT_DIR; an error message when that
happens has been updated.
* gc/better-error-when-local-clone-fails-with-symlink:
clone: error specifically with --local and symlinked objects
Code clean-up to replace a hardcoded constant with a CPP macro.
* rs/get-tar-commit-id-use-defined-const:
get-tar-commit-id: use TYPEFLAG_GLOBAL_HEADER instead of magic value
Back in 5b92477f89 (builtin/gc.c: conditionally avoid pruning objects
via loose, 2022-05-20), `git gc` learned the `--cruft` option and
`gc.cruftPacks` configuration to opt-in to writing cruft packs when
collecting or pruning unreachable objects.
Cruft packs were introduced with the merge in a50036da1a (Merge branch
'tb/cruft-packs', 2022-06-03). They address the problem of "loose object
explosions", where Git will write out many individual loose objects when
there is a large number of unreachable objects that have not yet aged
past `--prune=<date>`.
Instead of keeping track of those unreachable yet recent objects via
their loose object file's mtime, cruft packs collect all unreachable
objects into a single pack with a corresponding `*.mtimes` file that
acts as a table to store the mtimes of all unreachable objects. This
prevents the need to store unreachable objects as loose as they age out
of the repository, and avoids the problem of loose object explosions.
Beyond avoiding loose object explosions, cruft packs also act as a more
efficient mechanism to store unreachable objects as they age out of a
repository. This is because pairs of similar unreachable objects serve
as delta bases for one another.
In 5b92477f89, the feature was introduced as experimental. Since then,
GitHub has been running these patches in every repository generating
hundreds of millions of cruft packs along the way. The feature is
battle-tested, and avoids many pathological cases such as above. Users
who either run `git gc` manually, or via `git maintenance` can benefit
from having cruft packs.
As such, enable cruft pack generation to take place by default (by
making `gc.cruftPacks` have the default of "true" rather than "false).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cruft packs were implemented, we never adjusted the code for `git
gc`'s `--keep-largest-pack` and `gc.bigPackThreshold` to ignore cruft
packs. This option and configuration option share a common
implementation, but including cruft packs is wrong in both cases:
- Running `git gc --keep-largest-pack` in a repository where the
largest pack is the cruft pack itself will make it impossible for
`git gc` to prune objects, since the cruft pack itself is kept.
- The same is true for `gc.bigPackThreshold`, if the size of the cruft
pack exceeds the limit set by the caller.
In the future, it is possible that `gc.bigPackThreshold` could be used
to write a separate cruft pack containing any new unreachable objects
that entered the repository since the last time a cruft pack was
written.
There are some complexities to doing so, mainly around handling
pruning objects that are in an existing cruft pack that is above the
threshold (which would either need to be rewritten, or else delay
pruning). Rewriting a substantially similar cruft pack isn't ideal, but
it is significantly better than the status-quo.
If users have large cruft packs that they don't want to rewrite, they
can mark them as `*.keep` packs. But in general, if a repository has a
cruft pack that is so large it is slowing down GC's, it should probably
be pruned anyway.
In the meantime, ignore cruft packs in the common implementation for
both of these options, and add a pair of tests to prevent any future
regressions here.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cruft packs were originally being developed, `-C` was designated as
the short-form for `--cruft` (as in `git repack -C`).
This was dropped due to confusion with Git's top-level `-C` option
before submitting to the list. But the reference to it in
`--cruft-expiration`'s help text was never updated. Fix that dangling
reference in this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
"git branch -d origin/master" would say "no such branch", but it is
likely a missed "-r" if refs/remotes/origin/master exists. The
command has been taught to give such a hint in its error message.
* cm/branch-delete-error-message-update:
branch: improve error log on branch not found by checking remotes refs
"git mergetool" and "git difftool" learns a new configuration
guiDefault to optionally favor configured guitool over non-gui-tool
automatically when $DISPLAY is set.
* tk/mergetool-gui-default-config:
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY
While parsing a .rev file, we check the header information to be sure it
makes sense. This happens before doing any additional validation such as
a checksum or value check. In order to differentiate between a bad
header and a non-existent file, we need to update the API for loading a
reverse index.
Make load_pack_revindex_from_disk() non-static and specify that a
positive value means "the file does not exist" while other errors during
parsing are negative values. Since an invalid header prevents setting up
the structures we would use for further validations, we can stop at that
point.
The place where we can distinguish between a missing file and a corrupt
file is inside load_revindex_from_disk(), which is used both by pack
rev-indexes and multi-pack-index rev-indexes. Some tests in t5326
demonstrate that it is critical to take some conditions to allow
positive error signals.
Add tests that check the three header values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'fsck' builtin checks many of Git's on-disk data structures, but
does not currently validate the pack rev-index files (a .rev file to
pair with a .pack and .idx file).
Before doing a more-involved check process, create the scaffolding
within builtin/fsck.c to have a new error type and add that error type
when the API method verify_pack_revindex() returns an error. That method
does nothing currently, but we will add checks to it in later changes.
For now, check that 'git fsck' succeeds without any errors in the normal
case. Future checks will be paired with tests that corrupt the .rev file
appropriately.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing server capabilities, we use "int" to store lengths and
offsets. At first glance this seems like a spot where our parser may be
confused by integer overflow if somebody sent us a malicious response.
In practice these strings are all bounded by the 64k limit of a
pkt-line, so using "int" is OK. However, it makes the code simpler to
audit if they just use size_t everywhere. Note that because we take
these parameters as pointers, this also forces many callers to update
their declared types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to write a bitmap, we need to have full coverage of all objects
that are about to be packed. In the traditional non-multi-pack-index
world this meant we need to do a full repack of all objects into a
single packfile. But in the new multi-pack-index world we can get away
with writing bitmaps when we have multiple packfiles as long as the
multi-pack-index covers all objects.
This is not always the case though. When asked to perform a repack of
local objects, only, then we cannot guarantee to have full coverage of
all objects regardless of whether we do a full repack or a repack with a
multi-pack-index. The end result is that writing the bitmap will fail in
both worlds:
$ git multi-pack-index write --stdin-packs --bitmap <packfiles
warning: Failed to write bitmap index. Packfile doesn't have full closure (object 1529341d78cf45377407369acb0f4ff2b5cdae42 is missing)
error: could not write multi-pack bitmap
Now there are two different ways to fix this. The first one would be to
amend git-multi-pack-index(1) to disable writing bitmaps when we notice
that we don't have full object coverage.
- We don't have enough information in git-multi-pack-index(1) in
order to tell whether the local repository _should_ have full
coverage. Because even when connected to an alternate object
directory, it may be the case that we still have all objects
around in the main object database.
- git-multi-pack-index(1) is quite a low-level tool. Automatically
disabling functionality that it was asked to provide does not feel
like the right thing to do.
We can easily fix it at a higher level in git-repack(1) though. When
asked to only include local objects via `-l` and when connected to an
alternate object directory then we will override the user's ask and
disable writing bitmaps with a warning. This is similar to what we do in
git-pack-objects(1), where we also disable writing bitmaps in case we
omit an object from the pack.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user passes `-l` to git-repack(1), then they essentially ask us
to only repack objects part of the local object database while ignoring
any packfiles part of an alternate object database. And we in fact honor
this bit when doing a geometric repack as the resulting packfile will
only ever contain local objects.
What we're missing though is that we don't take locality of packfiles
into account when computing whether the geometric sequence is intact or
not. So even though we would only ever roll up local packfiles anyway,
we could end up trying to repack because of non-local packfiles. This
does not make much sense, and in the worst case it can cause us to try
and do the geometric repack over and over again because we're never able
to restore the geometric sequence.
Fix this bug by honoring whether the user has passed `-l`. If so, we
skip adding any non-local packfiles to the pack geometry.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing the same packfile both as included and excluded via the
`--stdin-packs` option, then we will return an error because the
excluded packfile cannot be found. This is because we will only set the
`util` pointer for the included packfile list if it was found, so that
we later die when we notice that it's in fact not set for the excluded
packfile list.
Fix this bug by always setting the `util` pointer for both the included
and excluded list entries.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passed the same packfile twice via `--stdin-packs` we return an
error that the packfile supposedly was not found. This is because when
reading packs into the list of included or excluded packfiles, we will
happily re-add packfiles even if they are part of the lists already. And
while the list can now contain duplicates, we will only set the `util`
pointer of the first list entry to the `packed_git` structure. We notice
that at a later point when checking that all list entries have their
`util` pointer set and die with an error.
While this is kind of a nonsensical request, this scenario can be hit
when doing geometric repacks. When a repository is connected to an
alternate object directory and both have the exact same packfile then
both would get added to the geometric sequence. And when we then decide
to perform the repack, we will invoke git-pack-objects(1) with the same
packfile twice.
Fix this bug by removing any duplicates from both the included and
excluded packs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing the multi-pack-index with geometric repacking we will add
all packfiles to the index that are part of the geometric sequence. This
can potentially also include packfiles borrowed from an alternate object
directory. But given that a multi-pack-index can only ever include packs
that are part of the main object database this does not make much sense
whatsoever.
In the edge case where all packfiles are contained in the alternate
object database and the local repository has none itself this bug can
cause us to invoke git-multi-pack-index(1) with only non-local packfiles
that it ultimately cannot find. This causes it to return an error and
thus causes the geometric repack to fail.
Fix the code to skip non-local packfiles.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a geometric repack with multi-pack-indices, then we ask
git-multi-pack-index(1) to use the largest packfile as the preferred
pack. It can happen though that the largest packfile is not part of the
main object database, but instead part of an alternate object database.
The result is that git-multi-pack-index(1) will not be able to find the
preferred pack and print a warning. It then falls back to use the first
packfile that the multi-pack-index shall reference.
Fix this bug by only considering packfiles as preferred pack that are
local. This is the right thing to do given that a multi-pack-index
should never reference packfiles borrowed from an alternate.
While at it, rename the function `get_largest_active_packfile()` to
`get_preferred_pack()` to better document its intent.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the given format string expands to the empty string, a newline is
still printed. This makes using the output linewise more tedious. For
example, git update-ref --stdin does not accept empty lines.
Add options to "git branch", "git for-each-ref", and "git tag" to
not print these empty lines. The default behavior remains the same.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in e8c58f894b (t: support GIT_TEST_WRITE_REV_INDEX, 2021-01-25), we
added a test knob to conditionally enable writing a ".rev" file when
indexing a pack. At the time, this was used to ensure that the test
suite worked even when ".rev" files were written, which served as a
stress-test for the on-disk reverse index implementation.
Now that reading from on-disk ".rev" files is enabled by default, the
test knob `GIT_TEST_WRITE_REV_INDEX` no longer has any meaning.
We could get rid of the option entirely, but there would be no
convenient way to test Git when ".rev" files *aren't* in place.
Instead of getting rid of the option, invert its meaning to instead
disable writing ".rev" files, thereby running the test suite in a mode
where the reverse index is generated from scratch.
This ensures that, when GIT_TEST_NO_WRITE_REV_INDEX is set to some
spelling of "true", we are still running and exercising Git's behavior
when forced to generate reverse indexes from scratch. Do so by setting
it in the linux-TEST-vars CI run to ensure that we are maintaining good
coverage of this now-legacy code.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in e37d0b8730 (builtin/index-pack.c: write reverse indexes,
2021-01-25), Git learned how to read and write a pack's reverse index
from a file instead of in-memory.
A pack's reverse index is a mapping from pack position (that is, the
order that objects appear together in a ".pack") to their position in
lexical order (that is, the order that objects are listed in an ".idx"
file).
Reverse indexes are consulted often during pack-objects, as well as
during auxiliary operations that require mapping between pack offsets,
pack order, and index index.
They are useful in GitHub's infrastructure, where we have seen a
dramatic increase in performance when writing ".rev" files[1]. In
particular:
- an ~80% reduction in the time it takes to serve fetches on a popular
repository, Homebrew/homebrew-core.
- a ~60% reduction in the peak memory usage to serve fetches on that
same repository.
- a collective savings of ~35% in CPU time across all pack-objects
invocations serving fetches across all repositories in a single
datacenter.
Reverse indexes are also beneficial to end-users as well as forges. For
example, the time it takes to generate a pack containing the objects for
the 10 most recent commits in linux.git (representing a typical push) is
significantly faster when on-disk reverse indexes are available:
$ { git rev-parse HEAD && printf '^' && git rev-parse HEAD~10 } >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
Benchmark 1: git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 543.0 ms ± 20.3 ms [User: 616.2 ms, System: 58.8 ms]
Range (min … max): 521.0 ms … 577.9 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 245.0 ms ± 11.4 ms [User: 335.6 ms, System: 31.3 ms]
Range (min … max): 226.0 ms … 259.6 ms 13 runs
Summary
'git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null' ran
2.22 ± 0.13 times faster than 'git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
The same is true of writing a pack containing the objects for the 30
most-recent commits:
$ { git rev-parse HEAD && printf '^' && git rev-parse HEAD~30 } >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
Benchmark 1: git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 866.5 ms ± 16.2 ms [User: 1414.5 ms, System: 97.0 ms]
Range (min … max): 839.3 ms … 886.9 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 581.6 ms ± 10.2 ms [User: 1181.7 ms, System: 62.6 ms]
Range (min … max): 567.5 ms … 599.3 ms 10 runs
Summary
'git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null' ran
1.49 ± 0.04 times faster than 'git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
...and savings on trivial operations like computing the on-disk size of
a single (packed) object are even more dramatic:
$ git rev-parse HEAD >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" <in'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 305.8 ms ± 11.4 ms [User: 264.2 ms, System: 41.4 ms]
Range (min … max): 290.3 ms … 331.1 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 4.0 ms ± 0.3 ms [User: 1.7 ms, System: 2.3 ms]
Range (min … max): 1.6 ms … 4.6 ms 1155 runs
Summary
'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in' ran
76.96 ± 6.25 times faster than 'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in'
In the more than two years since e37d0b8730 was merged, Git's
implementation of on-disk reverse indexes has been thoroughly tested,
both from users enabling `pack.writeReverseIndexes`, and from GitHub's
deployment of the feature. The latter has been running without incident
for more than two years.
This patch changes Git's behavior to write on-disk reverse indexes by
default when indexing a pack, which should make the above operations
faster for everybody's Git installation after a repack.
(The previous commit explains some potential drawbacks of using on-disk
reverse indexes in certain limited circumstances, that essentially boil
down to a trade-off between time to generate, and time to access. For
those limited cases, the `pack.readReverseIndex` escape hatch can be
used).
[1]: https://github.blog/2021-04-29-scaling-monorepo-maintenance/#reverse-indexes
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" from an empty repository learned to propagate the
choice of the hash algorithm from the source repository to the
newly created repository.
* jc/clone-object-format-from-void:
clone: propagate object-format when cloning from void
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
cache.h's nature of a dumping ground of includes prevented it from
being included in some compat/ files, forcing us into a workaround
of having a double forward declaration of the read_in_full() function
(see commit 14086b0a13 ("compat/pread.c: Add a forward declaration to
fix a warning", 2007-11-17)). Now that we have moved functions like
read_in_full() from cache.h to wrapper.h, and wrapper.h isn't littered
with unrelated and scary #defines, get rid of the extra forward
declaration and just have compat/pread.c include wrapper.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h and strbuf.[ch] had editor-related functions. Move these into
editor.[ch].
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move functions from cache.h for zlib.c into a new header file. Since
adding a "zlib.h" would cause issues with the real zlib, rename zlib.c
to git-zlib.c while we are at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--strategy-option" rebase collects the commands into a
struct string_list, then concatenates them into a string, prepending "--"
to each one before splitting the string and removing the "--" prefix.
This is an artifact of the scripted rebase and the need to support
"rebase --preserve-merges". Now that "--preserve-merges" no-longer
exists we can cleanup the way the argument is handled.
The tests for a bad strategy option are adjusted now that
parse_strategy_opts() is no-longer called when starting a rebase. The
fact that it only errors out when running "git rebase --continue" is a
mixed blessing but the next commit will fix the root cause of the
parsing problem so lets not worry about that here.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer stores the merge strategy options in an array of strings
which allocated with ALLOC_GROW(). Using "struct strvec" avoids manually
managing the memory of that array and simplifies the code.
Aside from memory allocation the changes to the sequencer are largely
mechanical, changing xopts_nr to xopts.nr and xopts[i] to xopts.v[i]. A
new option parsing macro OPT_STRVEC() is also added to collect the
strategy options. Hopefully this can be used to simplify the code in
builtin/merge.c in the future.
Note that there is a change of behavior to "git cherry-pick" and "git
revert" as passing “--no-strategy-option” will now clear any previous
strategy options whereas before this change it did nothing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The state files for "--strategy" and "--strategy-option" are written and
read twice, once by builtin/rebase.c and then by sequencer.c. This is an
artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we
only need to read and write these files in sequencer.c. This enables us
to remove a call to free() in read_strategy_opts() that was added by
f1f4ebf432 (sequencer.c: fix "opts->strategy" leak in
read_strategy_opts(), 2022-11-08) as this commit fixes the root cause of
that leak.
There is further scope for removing duplication in the reading and
writing of state files between builtin/rebase.c and sequencer.c but that
is left for a follow up series.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same macro in the archive reader code as on the writer side in
archive-tar.c to document the connection.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --all" does not have to download and handle the same
bundleURI over and over, which has been corrected.
* ds/fetch-bundle-uri-with-all:
fetch: download bundles once, even with --all
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Assorted config API updates.
* ab/config-multi-and-nonbool:
for-each-repo: with bad config, don't conflate <path> and <cmd>
config API: add "string" version of *_value_multi(), fix segfaults
config API users: test for *_get_value_multi() segfaults
for-each-repo: error on bad --config
config API: have *_multi() return an "int" and take a "dest"
versioncmp.c: refactor config reading next commit
config API: add and use a "git_config_get()" family of functions
config tests: add "NULL" tests for *_get_value_multi()
config tests: cover blind spots in git_die_config() tests
Clean-up of the code path that reports what "git fetch" did to each
ref.
* ps/fetch-ref-update-reporting:
fetch: centralize printing of reference updates
fetch: centralize logic to print remote URL
fetch: centralize handling of per-reference format
fetch: pass the full local reference name to `format_display`
fetch: move output format into `display_state`
fetch: move reference width calculation into `display_state`
Code clean-up for "-Wunused-parameter" build.
* jk/unused-post-2.40-part2:
parse-options: drop parse_opt_unknown_cb()
t/helper: mark unused argv/argc arguments
mark "argv" as unused when we check argc
builtins: mark unused prefix parameters
builtins: annotate always-empty prefix parameters
builtins: always pass prefix to parse_options()
fast-import: fix file access when run from subdir
"git for-each-ref" learns '%(ahead-behind:<base>)' that computes the
distances from a single reference point in the history with bunch
of commits in bulk.
* ds/ahead-behind:
commit-reach: add tips_reachable_from_bases()
for-each-ref: add ahead-behind format atom
commit-reach: implement ahead_behind() logic
commit-graph: introduce `ensure_generations_valid()`
commit-graph: return generation from memory
commit-graph: simplify compute_generation_numbers()
commit-graph: refactor compute_topological_levels()
for-each-ref: explicitly test no matches
for-each-ref: add --stdin option
New git users may want to locally delete remote-tracking branches but
don't really understand how they are distinguished from branches by git.
Then one may naively try:
`git branch -d foo/bar` and get a correct error `branch foo/bar not
found` but hard to understand for a newbie, this patch aims to guide one
in such case.
when failing to delete a branch with `git branch -d <branch>` because
of branch not found, try to find a **remote refs** matching `<branch>`
and if so, add an hint:
`Did you forget --remote?` to the error message
Signed-off-by: Clement Mabileau <mabileau.clement@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no merge.tool or diff.tool is configured or manually selected, the
selection of a default tool is sensitive to the DISPLAY variable; in a
GUI session a gui-specific tool will be proposed if found, and
otherwise a terminal-based one. This "GUI-optimizing" behavior is
important because a GUI can make a huge difference to a user's ability
to understand and correctly complete a non-trivial conflicting merge.
Some time ago the merge.guitool and diff.guitool config options were
introduced to enable users to configure both a GUI tool, and a non-GUI
tool (with fallback if no GUI tool configured), in the same environment.
Unfortunately, the --gui argument introduced to support the selection of
the guitool is still explicit. When using configured tools, there is no
equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI
environment" behavior.
As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration
options, difftool.guiDefault and mergetool.guiDefault, supporting a special
value "auto" which causes the corresponding tool or guitool to be selected
depending on the presence of a non-empty DISPLAY value. Also support "true"
to say "default to the guitool (unless --no-gui is passed on the
commandline)", and "false" as the previous default behavior when these new
configuration options are not specified.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user could prepare an empty repository and set it to use SHA256 as
the object format. The new repository created by "git clone" from
such a repository however would not record that it is expecting
objects in the same SHA256 format. This works as expected if the
source repository is not empty.
Just like we started copying the name of the primary branch from the
remote repository even if it is unborn in 3d8314f8 (clone: propagate
empty remote HEAD even with other branches, 2022-07-07), lift the
code that records the object format out of the block executed only
when cloning from an instantiated repository, so that it works also
when cloning from an empty repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-redundant" gave a warning when run, as the command has
outlived its usefulness long ago and is nominated for future
removal. Now we escalate to give an error.
* jk/really-deprecate-pack-redundant:
pack-redundant: escalate deprecation warning to an error
Streamline --rebase-merges command line option handling and
introduce rebase.merges configuration variable.
* ah/rebase-merges-config:
rebase: add a config option for --rebase-merges
rebase: deprecate --rebase-merges=""
rebase: add documentation and test for --no-rebase-merges
Code clean-up.
* jk/fast-export-cleanup:
fast-export: drop unused parameter from anonymize_commit_message()
fast-export: drop data parameter from anonymous generators
fast-export: de-obfuscate --anonymize-map handling
fast-export: factor out anonymized_entry creation
fast-export: simplify initialization of anonymized hashmaps
fast-export: drop const when storing anonymized values
Update 'git write-tree' to allow using the sparse-index in memory
without expanding to a full one.
The recursive algorithm for update_one() was already updated in 2de37c5
(cache-tree: integrate with sparse directory entries, 2021-03-03) to
handle sparse directory entries in the index. Hence we can just set the
requires-full-index to false for "write-tree".
The `p2000` tests demonstrate a ~96% execution time reduction for 'git
write-tree' using a sparse index:
Test before after
-----------------------------------------------------------------
2000.78: git write-tree (full-v3) 0.34 0.33 -2.9%
2000.79: git write-tree (full-v4) 0.32 0.30 -6.3%
2000.80: git write-tree (sparse-v3) 0.47 0.02 -95.8%
2000.81: git write-tree (sparse-v4) 0.45 0.02 -95.6%
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
git describe compares the index with the working tree when (and only
when) it is run with the "--dirty" flag. This is done by the
run_diff_index() function. The function has been made aware of the
sparse-index in the series that led to 8d2c3732 (Merge branch
'ld/sparse-diff-blame', 2021-12-21). Hence we can just set the
requires-full-index to false for "describe".
Performance metrics
Test HEAD~1 HEAD
-------------------------------------------------------------------------------------------------
2000.2: git describe --dirty (full-v3) 0.08(0.09+0.01) 0.08(0.06+0.03) +0.0%
2000.3: git describe --dirty (full-v4) 0.09(0.07+0.03) 0.08(0.05+0.04) -11.1%
2000.4: git describe --dirty (sparse-v3) 0.88(0.82+0.06) 0.02(0.01+0.05) -97.7%
2000.5: git describe --dirty (sparse-v4) 0.68(0.60+0.08) 0.02(0.02+0.04) -97.1%
2000.6: echo >>new && git describe --dirty (full-v3) 0.08(0.04+0.05) 0.08(0.05+0.04) +0.0%
2000.7: echo >>new && git describe --dirty (full-v4) 0.08(0.07+0.03) 0.08(0.05+0.04) +0.0%
2000.8: echo >>new && git describe --dirty (sparse-v3) 0.75(0.69+0.07) 0.02(0.03+0.03) -97.3%
2000.9: echo >>new && git describe --dirty (sparse-v4) 0.81(0.73+0.09) 0.02(0.01+0.05) -97.5%
Signed-off-by: Raghul Nanth A <nanth.raghul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetch.bundleURI is set, 'git fetch' downloads bundles from the
given bundle URI before fetching from the specified remote. However,
when using non-file remotes, 'git fetch --all' will launch 'git fetch'
subprocesses which then read fetch.bundleURI and fetch the bundle list
again. We do not expect the bundle list to have new information during
these multiple runs, so avoid these extra calls by un-setting
fetch.bundleURI in the subprocess arguments.
Be careful to skip fetching bundles for the empty bundle string.
Fetching bundles from the empty list presents some interesting test
failures.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to include and/or uninclude parse-options.h file as
needed.
* sg/parse-options-h-users:
treewide: remove unnecessary inclusions of parse-options.h from headers
treewide: include parse-options.h in source files
A few commands don't take any options at all, and confirm this by
checking argc. After that they have no need to look at argv, but we're
still stuck with it by convention. Let's annotate these cases so that
the compiler doesn't complain with -Wunused-parameter.
Note that in scalar and get-tar-commit-id, we're forced to keep argv by
calling convention (the functions must match cmd_main() and builtin
cmd_foo() conventions, respectively). In diff, these are subcommand
modes that we call individually, so we _could_ just drop the argv
parameters entirely. But it's weird to pass argc without argv, and it
implies that the caller knows that the subcommands aren't interested in
further arguments. It's less confusing to just keep them and silence the
compiler warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All builtins receive a "prefix" parameter, but it is only useful if they
need to adjust filenames given by the user on the command line. For
builtins that do not even call parse_options(), they often don't look at
the prefix at all, and -Wunused-parameter complains.
Let's annotate those to silence the compiler warning. I gave a quick
scan of each of these cases, and it seems like they don't have anything
they _should_ be using the prefix for (i.e., there is no hidden bug that
we are missing). The only questionable cases I saw were:
- in git-unpack-file, we create a tempfile which will always be at the
root of the repository, even if the command is run from a subdir.
Arguably this should be created in the subdir from which we're run
(as we report the path only as a relative name). However, nobody has
complained, and I'm hesitant to change something that is deep
plumbing going back to April 2005 (though I think within our
scripts, the sole caller in git-merge-one-file would be OK, as it
moves to the toplevel itself).
- in fetch-pack, local-filesystem remotes are taken as relative to the
project root, not the current directory. So:
git init server.git
[...put stuff in server.git...]
git init client.git
cd client.git
mkdir subdir
cd subdir
git fetch-pack ../../server.git ...
won't work, as we quietly move to the top of the repository before
interpreting the path (so "../server.git" would work). This is
weird, but again, nobody has complained and this is how it has
always worked. And this is how "git fetch" works, too. Plus it
raises questions about how a configured remote like:
git config remote.origin.url ../server.git
should behave. I can certainly come up with a reasonable set of
behavior, but it may not be worth stirring up complications in a
plumbing tool.
So I've left the behavior untouched in both of those cases. If anybody
really wants to revisit them, it's easy enough to drop the UNUSED
marker. This commit is just about removing them as obstacles to turning
on -Wunused-parameter all the time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's usually a bad idea for a builtin's cmd_foo() to ignore the "prefix"
argument it gets, as it needs to prepend that string when accessing any
paths given by the user.
But if a builtin does not ask for the git wrapper to run repository
setup (via the RUN_SETUP or RUN_SETUP_GENTLY flags), then we know the
prefix will always be NULL (it is adjusting for the chdir() done during
repo setup, but there cannot be one if we did not set up the repo). In
those cases it's OK to ignore "prefix", but it's worth annotating for a
few reasons:
1. It serves as documentation to somebody reading the code about what
we expect.
2. If the flags in git.c ever change, the run-time assertion may help
detect the problem (though only if the command is run from a
subdirectory of the repository).
3. It notes to the compiler that we are OK ignoring "prefix". In
particular, this silences -Wunused-parameter. It _could_ also help
the compiler generate better code (because it will know the prefix
is NULL), but in practice this is quite unlikely to matter.
Note that I've only added this annotation to commands which triggered
-Wunused-parameter. It would be correct to add it to any builtin which
doesn't ask for RUN_SETUP, but most of the rest of them do the sensible
thing with "prefix" by passing it to parse_options(). So they're much
more likely to just work if they ever switched to RUN_SETUP, and aren't
worth annotating.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our builtins receive a "prefix" argument as part of their cmd_foo()
function. We should always pass this to parse_options() if we're calling
it, as it may be used for OPT_FILENAME() options.
In the cases here, there's no option that would use it, so we're not
fixing any bug. This is just future-proofing and setting a good example
(plus quelling some -Wunused-parameter warnings).
Note in the case of revert/cherry-pick, that we plumb the prefix through
to run_sequencer(), as those builtins are just thin wrappers around it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cmd_fast_import(), we ignore the "prefix" argument entirely, even
though it tells us how we may have changed directory to the root of the
repository earlier in the process. Which means that if you run it from a
subdir and point to paths in the filesystem, like:
cd subdir
git fast-import --import-marks=foo <dump
then it will look for "foo" in the root of the repository, not the
current directory ("subdir/") which the user would have expected.
We can fix this by recording the prefix and using it as appropriate
whenever we open a file for reading or writing. I found each of these by
looking for cases where we call fopen() within fast-import.c, so this
should cover all cases. The new test triggers each one, as well as
making sure we don't accidentally apply the prefix when --relative-marks
is in use (since that option interprets some paths as relative to a
specific directory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transports that do not support protocol v2 did not correctly fall
back to protocol v0 under certain conditions, which has been
corrected.
* jk/fix-proto-downgrade-to-v0:
git_connect(): fix corner cases in downgrading v2 to v0
Fix a logic error in 4950b2a2b5 (for-each-repo: run subcommands on
configured repos, 2020-09-11). Due to assuming that elements returned
from the repo_config_get_value_multi() call wouldn't be "NULL" we'd
conflate the <path> and <command> part of the argument list when
running commands.
As noted in the preceding commit the fix is to move to a safer
"*_string_multi()" version of the *_multi() API. This change is
separated from the rest because those all segfaulted. In this change
we ended up with different behavior.
When using the "--config=<config>" form we take each element of the
list as a path to a repository. E.g. with a configuration like:
[repo] list = /some/repo
We would, with this command:
git for-each-repo --config=repo.list status builtin
Run a "git status" in /some/repo, as:
git -C /some/repo status builtin
I.e. ask "status" to report on the "builtin" directory. But since a
configuration such as this would result in a "struct string_list *"
with one element, whose "string" member is "NULL":
[repo] list
We would, when constructing our command-line in
"builtin/for-each-repo.c"...
strvec_pushl(&child.args, "-C", path, NULL);
for (i = 0; i < argc; i++)
strvec_push(&child.args, argv[i]);
...have that "path" be "NULL", and as strvec_pushl() stops when it
sees NULL we'd end with the first "argv" element as the argument to
the "-C" option, e.g.:
git -C status builtin
I.e. we'd run the command "builtin" in the "status" directory.
In another context this might be an interesting security
vulnerability, but I think that this amounts to a nothingburger on
that front.
A hypothetical attacker would need to be able to write config for the
victim to run, if they're able to do that there's more interesting
attack vectors. See the "safe.directory" facility added in
8d1a744820 (setup.c: create `safe.bareRepository`, 2022-07-14).
An even more unlikely possibility would be an attacker able to
generate the config used for "for-each-repo --config=<key>", but
nothing else (e.g. an automated system producing that list).
Even in that case the attack vector is limited to the user running
commands whose name matches a directory that's interesting to the
attacker (e.g. a "log" directory in a repository). The second
argument (if any) of the command is likely to make git die without
doing anything interesting (e.g. "-p" to "log", there being no "-p"
built-in command to run).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix numerous and mostly long-standing segfaults in consumers of
the *_config_*value_multi() API. As discussed in the preceding commit
an empty key in the config syntax yields a "NULL" string, which these
users would give to strcmp() (or similar), resulting in segfaults.
As this change shows, most users users of the *_config_*value_multi()
API didn't really want such an an unsafe and low-level API, let's give
them something with the safety of git_config_get_string() instead.
This fix is similar to what the *_string() functions and others
acquired in[1] and [2]. Namely introducing and using a safer
"*_get_string_multi()" variant of the low-level "_*value_multi()"
function.
This fixes segfaults in code introduced in:
- d811c8e17c (versionsort: support reorder prerelease suffixes, 2015-02-26)
- c026557a37 (versioncmp: generalize version sort suffix reordering, 2016-12-08)
- a086f921a7 (submodule: decouple url and submodule interest, 2017-03-17)
- a6be5e6764 (log: add log.excludeDecoration config option, 2020-04-16)
- 92156291ca (log: add default decoration filter, 2022-08-05)
- 50a044f1e4 (gc: replace config subprocesses with API calls, 2022-09-27)
There are now two users ofthe low-level API:
- One in "builtin/for-each-repo.c", which we'll convert in a
subsequent commit.
- The "t/helper/test-config.c" code added in [3].
As seen in the preceding commit we need to give the
"t/helper/test-config.c" caller these "NULL" entries.
We could also alter the underlying git_configset_get_value_multi()
function to be "string safe", but doing so would leave no room for
other variants of "*_get_value_multi()" that coerce to other types.
Such coercion can't be built on the string version, since as we've
established "NULL" is a true value in the boolean context, but if we
coerced it to "" for use in a list of strings it'll be subsequently
coerced to "false" as a boolean.
The callback pattern being used here will make it easy to introduce
e.g. a "multi" variant which coerces its values to "bool", "int",
"path" etc.
1. 40ea4ed903 (Add config_error_nonbool() helper function,
2008-02-11)
2. 6c47d0e8f3 (config.c: guard config parser from value=NULL,
2008-02-11).
3. 4c715ebb96 (test-config: add tests for the config_set API,
2014-07-28)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in 6c62f01552 (for-each-repo: do nothing on empty config,
2021-01-08) this command wants to ignore a non-existing config key,
but let's not conflate that with bad config.
Before this, all these added tests would pass with an exit code of 0.
We could preserve the comment added in 6c62f01552, but now that we're
directly using the documented repo_config_get_value_multi() value it's
just narrating something that should be obvious from the API use, so
let's drop it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the "git_configset_get_value_multi()" function and its siblings
return an "int" and populate a "**dest" parameter like every other
git_configset_get_*()" in the API.
As we'll take advantage of in subsequent commits, this fixes a blind
spot in the API where it wasn't possible to tell whether a list was
empty from whether a config key existed. For now we don't make use of
those new return values, but faithfully convert existing API users.
Most of this is straightforward, commentary on cases that stand out:
- To ensure that we'll properly use the return values of this function
in the future we're using the "RESULT_MUST_BE_USED" macro introduced
in [1].
As git_die_config() now has to handle this return value let's have
it BUG() if it can't find the config entry. As tested for in a
preceding commit we can rely on getting the config list in
git_die_config().
- The loops after getting the "list" value in "builtin/gc.c" could
also make use of "unsorted_string_list_has_string()" instead of using
that loop, but let's leave that for now.
- In "versioncmp.c" we now use the return value of the functions,
instead of checking if the lists are still non-NULL.
1. 1e8697b5c4 (submodule--helper: check repo{_submodule,}_init()
return values, 2022-09-01),
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have the basic "git_config_get_value()" function and its
"repo_*" and "configset" siblings to get a given "key" and assign the
last key found to a provided "value".
But some callers don't care about that value, but just want to use the
return value of the "get_value()" function to check whether the key
exist (or another non-zero return value).
The immediate motivation for this is that a subsequent commit will
need to change all callers of the "*_get_value_multi()" family of
functions. In two cases here we (ab)used it to check whether we had
any values for the given key, but didn't care about the return value.
The rest of the callers here used various other config API functions
to do the same, all of which resolved to the same underlying functions
to provide the answer.
Some of these were using either git_config_get_string() or
git_config_get_string_tmp(), see fe4c750fb1 (submodule--helper: fix a
configure_added_submodule() leak, 2022-09-01) for a recent example. We
can now use a helper function that doesn't require a throwaway
variable.
We could have changed git_configset_get_value_multi() (and then
git_config_get_value() etc.) to accept a "NULL" as a "dest" for all
callers, but let's avoid changing the behavior of existing API
users. Having an "unused" value that we throw away internal to
config.c is cheap.
A "NULL as optional dest" pattern is also more fragile, as the intent
of the caller might be misinterpreted if he were to accidentally pass
"NULL", e.g. when "dest" is passed in from another function.
Another name for this function could have been
"*_config_key_exists()", as suggested in [1]. That would work for all
of these callers, and would currently be equivalent to this function,
as the git_configset_get_value() API normalizes all non-zero return
values to a "1".
But adding that API would set us up to lose information, as e.g. if
git_config_parse_key() in the underlying configset_find_element()
fails we'd like to return -1, not 1.
Let's change the underlying configset_find_element() function to
support this use-case, we'll make further use of it in a subsequent
commit where the git_configset_get_value_multi() function itself will
expose this new return value.
This still leaves various inconsistencies and clobbering or ignoring
of the return value in place. E.g here we're modifying
configset_add_value(), but ever since it was added in [2] we've been
ignoring its "int" return value, but as we're changing the
configset_find_element() it uses, let's have it faithfully ferry that
"ret" along.
Let's also use the "RESULT_MUST_BE_USED" macro introduced in [3] to
assert that we're checking the return value of
configset_find_element().
We're leaving the same change to configset_add_value() for some future
series. Once we start paying attention to its return value we'd need
to ferry it up as deep as do_config_from(), and would need to make
least read_{,very_}early_config() and git_protected_config() return an
"int" instead of "void". Let's leave that for now, and focus on
the *_get_*() functions.
1. 3c8687a73e (add `config_set` API for caching config-like files, 2014-07-28)
2. https://lore.kernel.org/git/xmqqczadkq9f.fsf@gitster.g/
3. 1e8697b5c4 (submodule--helper: check repo{_submodule,}_init()
return values, 2022-09-01),
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can easily be seen from grepping in our sources, we had these uses
of "the_repository" in various library code in cases where the
function in question was already getting a "struct repository *"
argument. Let's use that argument instead.
Out of these changes only the changes to "cache-tree.c",
"commit-reach.c", "shallow.c" and "upload-pack.c" would have cleanly
applied before the migration away from the "repo_*()" wrapper macros
in the preceding commits.
The rest aren't new, as we'd previously implicitly refer to
"the_repository", but it's now more obvious that we were doing the
wrong thing all along, and should have used the parameter instead.
The change to change "get_index_format_default(the_repository)" in
"read-cache.c" to use the "r" variable instead should arguably have
been part of [1], or in the subsequent cleanup in [2]. Let's do it
here, as can be seen from the initial code in [3] it's not important
that we use "the_repository" there, but would prefer to always use the
current repository.
This change excludes the "the_repository" use in "upload-pack.c"'s
upload_pack_advertise(), as the in-flight [4] makes that change.
1. ee1f0c242e (read-cache: add index.skipHash config option,
2023-01-06)
2. 6269f8eaad (treewide: always have a valid "index_state.repo"
member, 2023-01-17)
3. 7211b9e753 (repo-settings: consolidate some config settings,
2019-08-13)
4. <Y/hbUsGPVNAxTdmS@coredump.intra.peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preceding commits we changed many calls to macros that were
providing a "the_repository" argument to invoke corresponding repo_*()
function instead. Let's follow-up and adjust references to those in
comments, which coccinelle didn't (and inherently can't) catch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"rerere.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"promisor-remote.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"packfile.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"diff.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There exists no direct way to interrogate git about which paths are
matched by a given set of sparsity rules. It is possible to get this
information from git, but it includes checking out the commit that
contains the paths, applying the sparse checkout patterns and then using
something like 'git ls-files -t' to check if the skip worktree bit is
set. This works in some case, but there are cases where it is awkward or
infeasible to generate a checkout for this purpose.
Exposing the pattern matching of sparse checkout enables more tooling to
be built and avoids a situation where tools that want to reason about
sparse checkouts start containing parallel implementation of the rules.
To accommodate this, add a 'check-rules' subcommand to the
'sparse-checkout' builtin along the lines of the 'git check-ignore' and
'git check-attr' commands. The new command accepts a list of paths on
stdin and outputs just the ones the match the sparse checkout.
To allow for use in a bare repository and to allow for interrogating
about other patterns than the current ones, include a '--rules-file'
option which allows the caller to explicitly pass sparse checkout rules
in the format accepted by 'sparse-checkout set --stdin'.
To allow for reuse of the handling of input patterns for the
'--rules-file' flag, modify 'add_patterns_from_input()' to be able to
read from a 'FILE' instead of just stdin.
To allow for reuse of the logic which decides whether or not rules
should be interpreted as cone-mode patterns, split that part out of
'update_modes()' such that can be called without modifying the config.
An alternative could have been to create a new 'check-sparsity' command.
However, placing it under 'sparse-checkout' allows for a) more easily
re-using the sparse checkout pattern matching and cone/non-code mode
handling, and b) keeps the documentation for the command next to the
experimental warning and the cone-mode discussion.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding a sub-command to 'sparse-checkout' that can be
run in a bare repository, remove the 'NEED_WORK_TREE' flag from its
entry in the 'commands' array of 'git.c'.
To avoid that this changes any behaviour, add calls to
'setup_work_tree()' to all of the 'sparse-checkout' sub-commands and add
tests that verify that 'sparse-checkout <cmd>' still fail with a clear
error message telling the user that the command needs a work tree.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we rename a branch ref, we need to update any worktree that have
its HEAD pointing to the branch ref being renamed, so to make it use the
new ref name.
If we know in advance that we're renaming a branch that is not currently
checked out in any worktree, we can skip this step entirely. Let's do
it so.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cfaff3aac (branch -m: allow renaming a yet-unborn branch, 2020-12-13)
we added support for renaming an orphan branch when that branch is
checked out in the current worktree.
Let's also allow renaming an orphan branch checked out in a worktree
different than the current one.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bcfc82bd48 (branch: description for non-existent branch errors,
2022-10-08) we checked the HEAD in the current worktree to detect if the
branch to operate with is an orphan branch, so as to avoid the confusing
error: "No branch named...".
If we are asked to operate with an orphan branch in a different working
tree than the current one, we need to check the HEAD in that different
working tree.
Let's extend the check we did in bcfc82bd48, to check the HEADs in all
worktrees linked to the current repository, using the helper introduced
in 31ad6b61bd (branch: add branch_checked_out() helper, 2022-06-15).
The helper, branch_checked_out(), does its work obtaining internally a
list of worktrees linked to the current repository. Obtaining that list
is not a lightweight work because it implies disk access.
In copy_or_rename_branch() we already have a list of worktrees. Let's
use that already obtained list, and avoid using here the helper.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Obtaining the list of worktrees, using get_worktrees(), is not a
lightweight operation, because it involves reading from disk.
Let's stop calling get_worktrees() in reject_rebase_or_bisect_branch()
and in replace_each_worktree_head_symref(). Make them receive the list
of worktrees from their only caller, copy_or_rename_branch().
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we introduced replace_each_worktree_head_symref() in 70999e9cec
(branch -m: update all per-worktree HEADs, 2016-03-27), we implemented a
best effort approach.
If we are asked to rename a branch that is simultaneously checked out in
multiple worktrees, we try to update all of those worktrees. If we fail
updating any of them, we die() as a signal that something has gone
wrong. However, at this point, the branch ref has already been renamed
and also updated the HEADs of the successfully updated worktrees.
Despite returning an error, we do not try to rollback those changes.
Let's add a test to notice if we change this behavior in the future.
In next commits we will change replace_each_worktree_head_symref() to
work more closely with its only caller, copy_or_rename_branch(). Let's
move the former closer to its caller, to facilitate those changes.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unusual syntax --rebase-merges="" (that is, --rebase-merges with an
empty string argument) has been an undocumented synonym of
--rebase-merges without an argument. Deprecate that syntax to avoid
confusion when a rebase.rebaseMerges config option is introduced, where
rebase.rebaseMerges="" will be equivalent to --no-rebase-merges.
It is not likely that anyone is actually using this syntax, but just in
case, deprecate the empty string argument instead of dropping support
for it immediately.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c3b58472be (pack-redundant: gauge the usage before proposing its
removal, 2020-08-25), we added a big, ugly warning when pack-redundant
is run. The plan there indicated that we would ratchet that up to an
error before finally removing it. Since it has been 2.5 years (and 9
releases) since then, let's continue with the plan.
Note that we did get one bite on the warning, which was somebody asking
about alternatives:
https://lore.kernel.org/git/CAKvOHKAFXQwt4D8yUCCkf_TQL79mYaJ=KAKhtpDNTvHJFuX1NA@mail.gmail.com/
but we didn't undo the ugly warning (and the advice continues to be "use
repack -d" instead).
There was also some discussion around the time of the deprecation that
pack-redundant was invoked by the bitbake tool, and it still seems to do
so now:
https://git.openembedded.org/bitbake
That use should probably just go away in favor of an occasional repack
(which probably even happens via auto-gc after fetch these days).
But since neither of those data points caused us to cancel the
deprecation plan by dropping the warning, it seems like we should
proceed with the next step.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the comment above the function indicates, we do not bother actually
storing commit messages in our anonymization map. But we still take the
message as a parameter, and just ignore it. Let's stop doing that, which
will make -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The anonymization code has a specific generator callback for each type
of data (e.g., one for paths, one for oids, and so on). These all take a
"data" parameter, but none of them use it for anything. Which is not
surprising, as the point is to generate a new name independent of any
input, and each function keeps its own static counter.
We added the extra pointer in d5bf91fde4 (fast-export: add a "data"
callback parameter to anonymize_str(), 2020-06-23) to handle
--anonymize-map parsing, but that turned out to be awkward itself, and
was recently dropped.
So let's get rid of this "data" parameter that nobody is using, both
from the generators and from anonymize_str() which plumbed it through.
This simplifies the code, and makes -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we handle an --anonymize-map option, we parse the orig/anon pair,
and then feed the "orig" string to anonymize_str(), along with a
generator function that duplicates the "anon" string to be cached in the
map.
This works, because anonymize_str() says "ah, there is no mapping yet
for orig; I'll add one from the generator". But there are some
downsides:
1. It's a bit too clever, as it's not obvious what the code is trying
to do or why it works.
2. It requires allowing generator functions to take an extra void
pointer, which is not something any of the normal callers of
anonymize_str() want.
3. It does the wrong thing if the same token is provided twice.
When there are conflicting options, like:
git fast-export --anonymize \
--anonymize-map=foo:one \
--anonymize-map=foo:two
we usually let the second one override the first. But by using
anonymize_str(), which has first-one-wins logic, we do the
opposite.
So instead of relying on anonymize_str(), let's directly add the entry
ourselves. We can tweak the tests to show that we handle overridden
options correctly now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When anonymizing output, there's only one spot where we generate new
entries to add to our hashmap: when anonymize_str() doesn't find an
entry, we use the generate() callback to make one and add it. Let's pull
that into its own function in preparation for another caller.
Note that we'll add one extra feature. In anonymize_str(), we know that
we won't find an existing entry in the hashmap (since it will only try
to add after failing to find one). But other callers won't have the same
behavior, so we should catch this case and free the now-dangling entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take pains to avoid doing a lookup on a hashmap which has not been
initialized with hashmap_init(). That was necessary back when this code
was written. But hashmap_get() became safer in b7879b0ba6 (hashmap:
allow re-use after hashmap_free(), 2020-11-02). Since then it's OK to
call functions on a zero-initialized table; it will just correctly
return NULL, since there is no match.
This simplifies the code a little, and also lets us keep the
initialization line closer to when we add an entry (which is when the
hashmap really does need to be totally initialized). That will help
later refactoring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store anonymized values as pointers to "const char *", since they are
conceptually const to callers who use them. But they are actually
allocated strings whose memory is owned by the struct.
The ownership mismatch hasn't been a big deal since we never free() them
(they are held until the program ends), but let's switch them to "char *"
in preparation for changing that.
Since most code only accesses them via anonymize_str(), it can continue
to narrow them to "const char *" in its return value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" that responds to "git push" requests failed to
clean a stale lockfile when killed in the middle, which has been
corrected.
* ps/receive-pack-unlock-before-die:
receive-pack: fix stale packfile locks when dying
Fix for a "ls-files --format="%(path)" that produced nonsense
output, which was a bug in 2.38.
* aj/ls-files-format-fix:
ls-files: fix "--format" output of relative paths
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user wishes to input a large list of patterns to 'git
for-each-ref' (likely a long list of exact refs) there are frequently
system limits on the number of command-line arguments.
Add a new --stdin option to instead read the patterns from standard
input. Add tests that check that any unrecognized arguments are
considered an error when --stdin is provided. Also, an empty pattern
list is interpreted as the complete ref set.
When reading from stdin, we populate the filter.name_patterns array
dynamically as opposed to pointing to the 'argv' array directly. This is
simple when using a strvec, as it is NULL-terminated in the same way. We
then free the memory directly from the strvec.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtins 'ls-remote', 'pack-objects', 'receive-pack', 'reflog' and
'send-pack' use parse_options(), but their source files don't directly
include 'parse-options.h'. Furthermore, the source files
'diagnose.c', 'list-objects-filter-options.c', 'remote.c' and
'send-pack.c' define option parsing callback functions, while
'revision.c' defines an option parsing helper function, and thus need
access to various fields in 'struct option' and 'struct
parse_opt_ctx_t', but they don't directly include 'parse-options.h'
either. They all can still be built, of course, because they include
one of the header files that does include 'parse-options.h' (though
unnecessarily, see the next commit).
Add those missing includes to these files, as our general rule is that
"a C file must directly include the header files that declare the
functions and the types it uses".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to print updated references during a fetch, the two different
call sites that do this will first call `format_display()` followed by a
call to `fputs()`. This is needlessly roundabout now that we have the
`display_state` structure that encapsulates all of the printing logic
for references.
Move displaying the reference updates into `format_display()` and rename
it to `display_ref_update()` to better match its new purpose, which
finalizes the conversion to make both the formatting and printing logic
of reference updates self-contained. This will make it easier to add new
output formats and printing to a different file descriptor than stderr.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching from a remote, we not only print the actual references
that have changed, but will also print the URL from which we have
fetched them to standard output. The logic to handle this is duplicated
across two different callsites with some non-trivial logic to compute
the anonymized URL. Furthermore, we're using global state to track
whether we have already shown the URL to the user or not.
Refactor the code by moving it into `format_display()`. Like this, we
can convert the global variable into a member of `display_state`. And
second, we can deduplicate the logic to compute the anonymized URL.
This also works as expected when fetching from multiple remotes, for
example via a group of remotes, as we do this by forking a standalone
git-fetch(1) process per remote that is to be fetched.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `format_display()` is used to print a single reference
update to a buffer which will then ultimately be printed by the caller.
This architecture causes us to duplicate some logic across the different
callsites of this function. This makes it hard to follow the code as
some parts of the logic are located in one place, while other parts of
the logic are located in a different place. Furthermore, by having the
logic scattered around it becomes quite hard to implement a new output
format for the reference updates.
We can make the logic a whole lot easier to understand by making the
`format_display()` function self-contained so that it handles formatting
and printing of the references. This will eventually allow us to easily
implement a completely different output format, but also opens the door
to conditionally print to either stdout or stderr depending on the
output format.
As a first step towards that goal we move the formatting directive used
by both callers to print a single reference update into this function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before printing the name of the local references that would be updated
by a fetch we first prettify the reference name. This is done at the
calling side so that `format_display()` never sees the full name of the
local reference. This restricts our ability to introduce new output
formats that might want to print the full reference name.
Right now, all callsites except one are prettifying the reference name
anyway. And the only callsite that doesn't passes `FETCH_HEAD` as the
hardcoded reference name to `format_display()`, which would never be
changed by a call to `prettify_refname()` anyway. So let's refactor the
code to pass in the full local reference name and then prettify it in
the formatting code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-fetch(1) command supports printing references either in "full"
or "compact" format depending on the `fetch.ouput` config key. The
format that is to be used is tracked in a global variable.
De-globalize the variable by moving it into the `display_state`
structure.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to print references in proper columns we need to calculate the
width of the reference column before starting to print the references.
This is done with the help of a global variable `refcol_width`.
Refactor the code to instead use a new structure `display_state` that
contains the computed width and plumb it through the stack as required.
This is only the first step towards de-globalizing the state required to
print references.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to write a log-message only output file
for empty commits.
* jk/format-patch-change-format-for-empty-commits:
format-patch: output header for empty commits
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
"git push" has been taught to allow deletion of refs with one-level
names to help repairing a repository who acquired such a ref by
mistake. In general, we don't encourage use of such a ref, and
creation or update to such a ref is rejected as before.
* zh/push-to-delete-onelevel-ref:
push: allow delete single-level ref
receive-pack: fix funny ref error messsage
"git restore" supports options like "--ours" that are only
meaningful during a conflicted merge, but these options are only
meaningful when updating the working tree files. These options are
marked to be incompatible when both "--staged" and "--worktree" are
in effect.
* ak/restore-both-incompatible-with-conflicts:
restore: fault --staged --worktree with merge opts
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
Instead of forcing each command to choose to honor GPG related
configuration variables, make the subsystem lazily initialize
itself.
* jc/gpg-lazy-init:
drop pure pass-through config callbacks
gpg-interface: lazily initialize and read the configuration
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
Code clean-up to clarify directory traversal API.
* en/dir-api-cleanup:
unpack-trees: add usage notices around df_conflict_entry
unpack-trees: special case read-tree debugging as internal usage
unpack-trees: rewrap a few overlong lines from previous patch
unpack-trees: mark fields only used internally as internal
unpack_trees: start splitting internal fields from public API
sparse-checkout: avoid using internal API of unpack-trees, take 2
sparse-checkout: avoid using internal API of unpack-trees
unpack-trees: clean up some flow control
dir: mark output only fields of dir_struct as such
dir: add a usage note to exclude_per_dir
dir: separate public from internal portion of dir_struct
unpack-trees: heed requests to overwrite ignored files
t2021: fix platform-specific leftover cruft
"git fsck" learned to check the index files in other worktrees,
just like "git gc" honors them as anchoring points.
* jk/fsck-indices-in-worktrees:
fsck: check even zero-entry index files
fsck: mention file path for index errors
fsck: check index files in all worktrees
fsck: factor out index fsck
When git-rebase invokes format-patch, it wants to make sure we use the
normal prefixes, and are not confused by diff.noprefix or similar. When
this was added in 5b220a6876 (Add --src/dst-prefix to git-formt-patch
in git-rebase.sh, 2010-09-09), we only had --src-prefix and --dst-prefix
to do so, which requires re-specifying the prefixes we expect to see.
These days we can say what we want more directly: just use the defaults.
This is a minor cleanup that should have no behavior change, but
hopefully the result expresses more clearly what the code is trying to
accomplish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced with the "--format" option in
ce74de93 (ls-files: introduce "--format" option, 2022-07-23),
where relative paths were computed using the output buffer,
which could lead to random garbage data in the output.
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When accepting a packfile in git-receive-pack(1), we feed that packfile
into git-index-pack(1) to generate the packfile index. As the packfile
would often only contain unreachable objects until the references have
been updated, concurrently running garbage collection might be tempted
to delete the packfile right away and thus cause corruption. To fix
this, we ask git-index-pack(1) to create a `.keep` file before moving
the packfile into place, which is getting deleted again once all of the
reference updates have been processed.
Now in production systems we have observed that those `.keep` files are
sometimes not getting deleted as expected, where the result is that
repositories tend to grow packfiles that are never deleted over time.
This seems to be caused by a race when git-receive-pack(1) is killed
after we have migrated the kept packfile from the quarantine directory
into the main object database. While this race window is typically small
it can be extended for example by installing a `proc-receive` hook.
Fix this race by registering the lockfile as a tempfile so that it will
automatically be removed at exit or when receiving a signal.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems a user would expect this option would work regardless
of whether it's fetching from a single remote, many remotes,
or recursing into submodules.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit dropped support for diff.noprefix in format-patch.
While this will do the right thing in most cases (where sending patches
without a prefix was an accidental side effect of the sender preferring
to see their local patches without prefixes), it left no good option for
a project or workflow where you really do want to send patches without
prefixes. You'd be stuck using "--no-prefix" for every invocation.
So let's add a config option specific to format-patch that enables this
behavior. That gives people who have such a workflow a way to get what
they want, but makes it hard to accidentally trigger it.
A more backwards-compatible way of doing the transition would be to have
format.noprefix default to diff.noprefix when it's not set. But that
doesn't really help the "accidental" problem; people would have to
manually set format.noprefix=false. And it's unlikely that anybody
really wants format.noprefix=true in the first place. I'm adding it here
mostly as an escape hatch, not because anybody has expressed any
interest in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of format-patch respects diff.noprefix, but this usually ends
up being a hassle for people receiving the patch, as they have to
manually specify "-p0" in order to apply it.
I don't think there was any specific intention for it to behave this
way. The noprefix option is handled by git_diff_ui_config(), and
format-patch exists in a gray area between plumbing and porcelain.
People do look at the output, and we'd expect it to colorize things,
respect their choice of algorithm, and so on. But this particular option
creates problems for the receiver (in theory so does diff.mnemonicprefix,
but since we are always formatting commits, the mnemonic prefixes will
always be "a/" and "b/").
So let's disable it. The slight downsides are:
- people who have set diff.noprefix presumably like to see their
patches without prefixes. If they use format-patch to review their
series, they'll see prefixes. On the other hand, it is probably a
good idea for them to look at what will actually get sent out.
We could try to play games here with "is stdout a tty", as we do for
color. But that's not a completely reliable signal, and it's
probably not worth the trouble. If you want to see the patch with
the usual bells and whistles, then you are better off using "git
log" or "git show".
- if a project really does have a workflow that likes prefix-less
patches, and the receiver is prepared to use "-p0", then the sender
now has to manually say "--no-prefix" for each format-patch
invocation. That doesn't seem _too_ terrible given that the receiver
has to manually say "-p0" for each git-am invocation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
static char *fix_filename(const char *prefix, const char *file);
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user can specify a filename to a command from the command line,
either as the value given to a command line option, or a command
line argument. When it is given as a relative filename, in the
user's mind, it is relative to the directory "git" was started from,
but by the time the filename is used, "git" would almost always have
chdir()'ed up to the root level of the working tree.
The given filename, if it is relative, needs to be prefixed with the
path to the current directory, and it typically is done by calling
prefix_filename() helper function. For commands that can also take
"-" to use the standard input or the standard output, however, this
needs to be done with care.
"git bundle create" uses the next word on the command line as the
output filename, and can take "-" to mean "write to the standard
output". It blindly called prefix_filename(), so running it in a
subdirectory did not quite work as expected.
Introduce a new helper, prefix_filename_except_for_dash(), and use
it to help "git bundle create" codepath.
Reported-by: Michael Henry
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For writing, "bundle create -" indicates that the bundle should be
written to stdout. But there's no matching handling of "-" for reading
operations. This is inconsistent, and a little inflexible (though one
can always use "/dev/stdin" on systems that support it).
However, it's easy to change. Once upon a time, the bundle-reading code
required a seekable descriptor, but that was fixed long ago in
e9ee84cf28 (bundle: allowing to read from an unseekable fd,
2011-10-13). So we just need to handle "-" explicitly when opening the
file.
We _could_ do this by handling "-" in read_bundle_header(), which the
reading functions all call already. But that is probably a bad idea.
It's also used by low-level code like the transport functions, and we
may want to be more careful there. We do not know that stdin is even
available to us, and certainly we would not want to get confused by a
configured URL that happens to point to "-".
So instead, let's add a helper to builtin/bundle.c. Since both the
bundle code and some of the callers refer to the bundle by name for
error messages, let's use the string "<stdin>" to make the output a bit
nicer to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 79862b6b77 (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to
79862b6b77, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
ssh some-host git bundle create foo.bundle |
git bundle unbundle
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
https://lore.kernel.org/git/20191110204126.30553-2-robbat2@gentoo.org/
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting an empty commit, it is surprising that a totally empty
file is generated. Set the flag to always print the header, matching
the behaviour of git-log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We discourage the creation/update of single-level refs
because some upper-layer applications only work in specified
reference namespaces, such as "refs/heads/*" or "refs/tags/*",
these single-level refnames may not be recognized. However,
we still hope users can delete them which have been created
by mistake.
Therefore, when updating branches on the server with
"git receive-pack", by checking whether it is a branch deletion
operation, it will determine whether to allow the update of
a single-level refs. This avoids creating/updating such
single-level refs, but allows them to be deleted.
On the client side, "git push" also does not properly fill in
the old-oid of single-level refs, which causes the server-side
"git receive-pack" to think that the ref's old-oid has changed
when deleting single-level refs, this causes the push to be
rejected. So the solution is to fix the client to be able to
delete single-level refs by properly filling old-oid.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user deletes the remote one level branch through
"git push origin -d refs/foo", remote will return an error:
"refusing to create funny ref 'refs/foo' remotely", here we
are not creating "refs/foo" instead wants to delete it, so a
better error description here would be: "refusing to update
funny ref 'refs/foo' remotely".
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option (as documented) for rebase.autoSquash has a capital S,
whereas the command line option has a small case s.
Cf. <20220617100309.3224-1-worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
The credential subsystem learned that a password may have an
explicit expiration.
* mh/credential-password-expiry:
credential: new attribute password_expiry_utc
The 'restore' command already rejects the --merge, --conflict, --ours
and --theirs options when combined with --staged, but accepts them when
--worktree is added as well.
Unfortunately that doesn't appear to do anything useful. The --ours and
--theirs options seem to be ignored when both --staged and --worktree
are given, whereas with --merge or --conflict, the command has the same
effect as if the --staged option wasn't present.
So reject those options with '--staged --worktree' as well, using
opts->accept_ref to distinguish restore from checkout.
Add test for both '--staged' and '--staged --worktree'.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/read-tree.c has some special functionality explicitly designed
for debugging unpack-trees.[ch]. Associated with that is two fields
that no other external caller would or should use. Mark these as
internal to unpack-trees, but allow builtin/read-tree to read or write
them for this special case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2f6b1eb794 ("cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index()", 2023-01-12) mistakenly added some initialization
of a member of unpack_trees_options that was intended to be
internal-only. This initialization should be done within
update_sparsity() instead.
Note that while o->result is mostly meant for unpack_trees() and
update_sparsity() mostly operates without o->result,
check_ok_to_remove() does consult it so we need to ensure it is properly
initialized.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct unpack_trees_options has the following field and comment:
struct pattern_list *pl; /* for internal use */
Despite the internal-use comment, commit e091228e17 ("sparse-checkout:
update working directory in-process", 2019-11-21) starting setting this
field from an external caller. At the time, the only way around that
would have been to modify unpack_trees() to take an extra pattern_list
argument, and there's a lot of callers of that function. However, when
we split update_sparsity() off as a separate function, with
sparse-checkout being the sole caller, the need to update other callers
went away. Fix this API problem by adding a pattern_list argument to
update_sparsity() and stop setting the internal o.pl field directly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fd2d4c135e (gpg-interface: lazily initialize and read the
configuration, 2023-02-09) shrunk a few custom config callbacks so that
they are just one-liners of:
return git_default_config(...);
We can drop them entirely and replace them direct calls of
git_default_config() intead. This makes the code a little shorter and
easier to understand (with the downside being that if they do grow
custom options again later, we'll have to recreate the functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In fb64ca526a (fsck: check index files in all worktrees, 2023-02-24), we
swapped out a call to vanilla repo_read_index() for a series of
read_index_from() calls, one per worktree. The code for the latter was
copied from add_index_objects_to_pending(), which checks for a positive
return value from the index reading function, and we do the same here in
fsck now.
But this is probably the wrong thing. I had interpreted the check as
"don't operate on the index struct if there was an error". But in
reality, if there is an error then the index-reading code will simply
die (which admittedly is not great for fsck, but that is not a new
problem).
The return value here is actually the number of entries read. So it
makes sense for add_index_objects_to_pending() to ignore a zero-entry
index (there is nothing to add). But for fsck, we would still want to
check any extensions, etc (though presumably it is unlikely to have them
in an empty index, I don't think it's impossible).
So we should ignore the return value from read_index_from() entirely.
This matches the behavior before fb64ca526a, when we ignored the return
value from repo_read_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --jobs=0" used to hit a BUG(), which has been corrected
to use the available CPUs.
* ma/fetch-parallel-use-online-cpus:
fetch: choose a sensible default with --jobs=0 again
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to fsck an index operates directly on the_index. Let's move it
into its own function in preparation for handling the index files from
other worktrees.
Since we now have only a single reference to the_index, let's drop
our USE_THE_INDEX_VARIABLE definition and just use the_repository.index
directly. That's a minor cleanup, but also ensures that we didn't miss
any references when moving the code into fsck_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our parallel process API takes several callbacks via function pointers
in the run_process_paralell_opts struct. Not every callback needs every
parameter; let's mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_note() requires a callback, but not all callbacks need all of
the parameters. Likewise, init_notes() takes a callback to implement the
"combine" strategy, but the "ignore" variant obviously doesn't look at
its arguments at all. Mark unused parameters as appropriate to silence
compiler warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our graph-traversal functions take callbacks for showing commits and
objects, but not all callbacks need each parameter. Likewise for the
similar traverse_bitmap_commit_list(), which has a different interface
but serves the same purpose. And the include_check mechanism, which
passes along a void pointer which is not always used.
Mark the unused ones to to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signal handlers receive their signal number as a parameter, but many
don't care what it is (because they only handle one signal, or because
their action is the same regardless of the signal). Mark such parameters
to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust several files to be more explicit about their dependency on
replace-objects to accommodate this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions were all defined in a separate ident.c already, so
create ident.h and move the declarations into that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some passwords have an expiry date known at generation. This may be
years away for a personal access token or hours for an OAuth access
token.
When multiple credential helpers are configured, `credential fill` tries
each helper in turn until it has a username and password, returning
early. If Git authentication succeeds, `credential approve`
stores the successful credential in all helpers. If authentication
fails, `credential reject` erases matching credentials in all helpers.
Helpers implement corresponding operations: get, store, erase.
The credential protocol has no expiry attribute, so helpers cannot
store expiry information. Even if a helper returned an improvised
expiry attribute, git credential discards unrecognised attributes
between operations and between helpers.
This is a particular issue when a storage helper and a
credential-generating helper are configured together:
[credential]
helper = storage # eg. cache or osxkeychain
helper = generate # eg. oauth
`credential approve` stores the generated credential in both helpers
without expiry information. Later `credential fill` may return an
expired credential from storage. There is no workaround, no matter how
clever the second helper. The user sees authentication fail (a retry
will succeed).
Introduce a password expiry attribute. In `credential fill`, ignore
expired passwords and continue to query subsequent helpers.
In the example above, `credential fill` ignores the expired password
and a fresh credential is generated. If authentication succeeds,
`credential approve` replaces the expired password in storage.
If authentication fails, the expired credential is erased by
`credential reject`. It is unnecessary but harmless for storage
helpers to self prune expired credentials.
Add support for the new attribute to credential-cache.
Eventually, I hope to see support in other popular storage helpers.
Example usage in a credential-generating helper
https://github.com/hickford/git-credential-oauth/pull/16
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Reviewed-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the run-hooks API to allow feeding data from the standard
input when running the hook script(s).
* ab/hook-api-with-stdin:
hook: support a --to-stdin=<path> option
sequencer: use the new hook API for the simpler "post-rewrite" call
hook API: support passing stdin to hooks, convert am's 'post-rewrite'
run-command: allow stdin for run_processes_parallel
run-command.c: remove dead assignment in while-loop
Leak fixes.
* ab/various-leak-fixes:
push: free_refs() the "local_refs" in set_refspecs()
push: refactor refspec_append_mapped() for subsequent leak-fix
receive-pack: release the linked "struct command *" list
grep API: plug memory leaks by freeing "header_list"
grep.c: refactor free_grep_patterns()
builtin/merge.c: free "&buf" on "Your local changes..." error
builtin/merge.c: use fixed strings, not "strbuf", fix leak
show-branch: free() allocated "head" before return
commit-graph: fix a parse_options_concat() leak
http-backend.c: fix cmd_main() memory leak, refactor reg{exec,free}()
http-backend.c: fix "dir" and "cmd_arg" leaks in cmd_main()
worktree: fix a trivial leak in prune_worktrees()
repack: fix leaks on error with "goto cleanup"
name-rev: don't xstrdup() an already dup'd string
various: add missing clear_pathspec(), fix leaks
clone: use free() instead of UNLEAK()
commit-graph: use free_commit_graph() instead of UNLEAK()
bundle.c: don't leak the "args" in the "struct child_process"
tests: mark tests as passing with SANITIZE=leak
prior to 51243f9 (run-command API: don't fall back on online_cpus(),
2022-10-12) `git fetch --multiple --jobs=0` would choose some default amount
of jobs, similar to `git -c fetch.parallel=0 fetch --multiple`. While our
documentation only ever promised that `fetch.parallel` would fall back to a
"sensible default", it makes sense to do the same for `--jobs`. So fall back
to online_cpus() and not BUG() out.
This fixes https://github.com/git-for-windows/git/issues/4302
Reported-by: Drew Noakes <drnoakes@microsoft.com>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a lower precedence configuration file (e.g. /etc/gitconfig)
defines format.attach in any way, there was no way to disable it in
a more specific configuration file (e.g. $HOME/.gitconfig).
Change the behaviour of setting it to an empty string. It used to
mean that the result is still a multipart message with only dashes
used as a multi-part separator, but now it resets the setting to
the default (which would be to give an inline patch, unless other
command line options are in effect).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finally retire the scripted "git add -p/-i" implementation and have
everybody use the one reimplemented in C.
* ab/retire-scripted-add-p:
docs & comments: replace mentions of "git-add--interactive.perl"
add API: remove run_add_interactive() wrapper function
add: remove "add.interactive.useBuiltin" & Perl "git add--interactive"
Plug leaks in sequencer subsystem and its users.
* ab/sequencer-unleak:
commit.c: free() revs.commit in get_fork_point()
builtin/rebase.c: free() "options.strategy_opts"
sequencer.c: always free() the "msgbuf" in do_pick_commit()
builtin/rebase.c: fix "options.onto_name" leak
builtin/revert.c: move free-ing of "revs" to replay_opts_release()
sequencer API users: fix get_replay_opts() leaks
sequencer.c: split up sequencer_remove_state()
rebase: use "cleanup" pattern in do_interactive_rebase()
The bundle-URI subsystem adds support for creation-token heuristics
to help incremental fetches.
* ds/bundle-uri-5:
bundle-uri: test missing bundles with heuristic
bundle-uri: store fetch.bundleCreationToken
fetch: fetch from an external bundle URI
bundle-uri: drop bundle.flag from design doc
clone: set fetch.bundleURI if appropriate
bundle-uri: download in creationToken order
bundle-uri: parse bundle.<id>.creationToken values
bundle-uri: parse bundle.heuristic=creationToken
t5558: add tests for creationToken heuristic
bundle: verify using check_connected()
bundle: test unbundling with incomplete history
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
"git ls-tree --format='%(path) %(path)' $tree $path" showed the
path three times, which has been corrected.
* rs/ls-tree-path-expansion-fix:
ls-tree: remove dead store and strbuf for quote_c_style()
ls-tree: fix expansion of repeated %(path)
Fix to a small regression in 2.38 days.
* ab/bundle-wo-args:
bundle <cmd>: have usage_msg_opt() note the missing "<file>"
builtin/bundle.c: remove superfluous "newargc" variable
bundle: don't segfault on "git bundle <subcmd>"
We document that you can specify "refs" to ls-remote, but we don't
explain any further than that they are "matched" as patterns. Since this
can be interpreted in a lot of ways, let's clarify that they are
tail-matched globs.
Likewise, let's use the word "patterns" to refer to them consistently,
rather than "refs" (both here and in the quick "-h" help), and mention
more explicitly that only one pattern needs to be matched (though there
is also an example already that shows this in action).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the last users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use the
underlying *_index() variants instead. Now all previous users of
"USE_THE_INDEX_COMPATIBILITY_MACROS" have been migrated away from the
wrapper macros, and if applicable to use the "USE_THE_INDEX_VARIABLE"
added in [1].
Let's leave the "index-compatibility.cocci" in place, even though it
won't be doing anything on "master". It will benefit any out-of-tree
code that need to use these compatibility macros. We can eventually
remove it.
1. bdafeae0b9 (cache.h & test-tool.h: add & use
"USE_THE_INDEX_VARIABLE", 2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the redundant update_main_cache_tree() function, and make its
users use cache_tree_update() instead.
The behavior of populating the "the_index.cache_tree" if it wasn't
present already was needed when this function was introduced in [1],
but it hasn't been needed since [2]; The "cache_tree_update()" will
now lazy-allocate, so there's no need for the wrapper.
1. 996277c520 (Refactor cache_tree_update idiom from commit,
2011-12-06)
2. fb0882648e (cache-tree: clean up cache_tree_update(), 2021-01-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a trivial rule for "write_cache_as_tree" to
"index-compatibility.cocci", and apply it. This was left out of the
rules added in 0e6550a2c6 (cocci: add a
index-compatibility.pending.cocci, 2022-11-19) because this
compatibility wrapper lived in "cache-tree.h", not "cache.h"
But it's like the other "USE_THE_INDEX_COMPATIBILITY_MACROS", so let's
migrate it too.
The replacement of "USE_THE_INDEX_COMPATIBILITY_MACROS" here with
"USE_THE_INDEX_VARIABLE" is a manual change on top, now that these
files only use "&the_index", and don't need any compatibility
macros (or functions).
The wrapping of some argument lists is likewise manual, as coccinelle
would otherwise give us overly long argument lists.
The reason for putting the "O" in the cocci rule on the "-" and "+"
lines is because I couldn't get correct whitespacing otherwise,
i.e. I'd end up with "oid,&the_index", not "oid, &the_index".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the rule added in [1] to change "cache_name_pos" to
"index_name_pos", which allows us to get rid of another
"USE_THE_INDEX_COMPATIBILITY_MACROS" macro.
The replacement of "USE_THE_INDEX_COMPATIBILITY_MACROS" here with
"USE_THE_INDEX_VARIABLE" is a manual change on top, now that these
files only use "&the_index", and don't need any compatibility
macros (or functions).
1. 0e6550a2c6 (cocci: add a index-compatibility.pending.cocci,
2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the "active_nr" part of "index-compatibility.pending.cocci",
which was left out in [1] due to an in-flight conflict. As of [2] the
topic we conflicted with has been merged to "master", so we can fully
apply this rule.
1. dc594180d9 (cocci & cache.h: apply variable section of "pending"
index-compatibility, 2022-11-19)
2. 9ea1378d04 (Merge branch 'ab/various-leak-fixes', 2022-12-14)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the "USE_THE_INDEX_COMPATIBILITY_MACROS" define with the
narrower "USE_THE_INDEX_VARIABLE". This could have been done in
07047d6829 (cocci: apply "pending" index-compatibility to some
"builtin/*.c", 2022-11-19), but I missed it at the time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forcing the porcelain commands to always read the
configuration variables related to the signing and verifying
signatures, lazily initialize the necessary subsystem on demand upon
the first use.
This hopefully would make it more future-proof as we do not have to
think and decide whether we should call git_gpg_config() in the
git_config() callback for each command.
A few git_config() callback functions that used to be custom
callbacks are now just a thin wrapper around git_default_config().
We could further remove, git_FOO_config and replace calls to
git_config(git_FOO_config) with git_config(git_default_config), but
to make it clear which ones are affected and the effect is only the
removal of git_gpg_config(), it is vastly preferred not to do such a
change in this step (they can be done on top once the dust settled).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" learned to release delta-island bitmap data when
it is done using it, saving peak heap memory usage.
* ew/free-island-marks:
delta-islands: free island_marks and bitmaps
Commit 7550424804 ("name-rev: include taggerdate in considering the best
name", 2016-04-22) introduced the idea of using taggerdate in the
criteria for selecting the best name. At the time, a certain commit in
linux.git -- namely, aed06b9cfcab -- was being named by name-rev as
v4.6-rc1~9^2~792
which, while correct, was very suboptimal. Some investigation found
that tweaking the MERGE_TRAVERSAL_WEIGHT to lower it could give
alternate answers such as
v3.13-rc7~9^2~14^2~42
or
v3.13~5^2~4^2~2^2~1^2~42
A manual solution involving looking at tagger dates came up with
v3.13-rc1~65^2^2~42
which is much nicer. That workaround was then implemented in name-rev.
Unfortunately, the taggerdate heuristic is causing bugs. I was pointed
to a case in a private repository where name-rev reports a name of the
form
v2022.10.02~86
when users expected to see one of the form
v2022.10.01~2
(I've modified the names and numbers a bit from the real testcase.) As
you can probably guess, v2022.10.01 was created after v2022.10.02 (by a
few hours), even though it pointed to an older commit. While the
condition is unusual even in the repository in question, it is not the
only problematic set of tags in that repository. The taggerdate logic
is causing problems.
Further, it turns out that this taggerdate heuristic isn't even helping
anymore. Due to the fix to naming logic in 3656f84278 ("name-rev:
prefer shorter names over following merges", 2021-12-04), we get
improved names without the taggerdate heuristic. For the original
commit of interest in linux.git, a modern git without the taggerdate
heuristic still provides the same optimal answer of interest, namely:
v3.13-rc1~65^2^2~42
So, the taggerdate is no longer providing benefit, and it is causing
problems. Simply get rid of it.
However, note that "taggerdate" as a variable is used to store things
besides a taggerdate these days. Ever since commit ef1e74065c
("name-rev: favor describing with tags and use committer date to
tiebreak", 2017-03-29), this has been used to store committer dates and
there it is used as a fallback tiebreaker (as opposed to a primary
criteria overriding effective distance calculations). We do not want to
remove that fallback tiebreaker, so not all instances of "taggerdate"
are removed in this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the "path_to_stdin" API added in the preceding commit in the
"git hook run" command.
For now we won't be using this command interface outside of the tests,
but exposing this functionality makes it easier to test the hook
API. The plan is to use this to extend the "sendemail-validate"
hook[1][2].
1. https://lore.kernel.org/git/ad152e25-4061-9955-d3e6-a2c8b1bd24e7@amd.com
2. https://lore.kernel.org/git/20230120012459.920932-1-michael.strawbridge@amd.com
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the invocation of the 'post-rewrite' hook run by 'git am' to
use the hook.h library. To do this we need to add a "path_to_stdin"
member to "struct run_hooks_opt".
In our API this is supported by asking for a file path, rather
than by reading stdin. Reading directly from stdin would involve caching
the entire stdin (to memory or to disk) once the hook API is made to
support "jobs" larger than 1, along with support for executing N hooks
at a time (i.e. the upcoming config-based hooks).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "strategy_opts" member was added in ba1905a5fe (builtin
rebase: add support for custom merge strategies, 2018-09-04) the
corresponding free() for it at the end of cmd_rebase() wasn't added,
let's do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the existing "squash_onto_name" added in [1] we need to
free() the xstrdup()'d "options.onto.name" added for "--keep-base" in
[2]..
1. 9dba809a69 (builtin rebase: support --root, 2018-09-04)
2. 414d924beb (rebase: teach rebase --keep-base, 2019-08-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In [1] and [2] I added the code being moved here to cmd_revert() and
cmd_cherry_pick(), now that we've got a "replay_opts_release()" for
the "struct replay_opts" it should know how to free these "revs",
rather than having these users reach into the struct to free its
individual members.
1. d1ec656d68 (cherry-pick: free "struct replay_opts" members,
2022-11-08)
2. fd74ac95ac (revert: free "struct replay_opts" members, 2022-07-01)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the replay_opts_release() function added in the preceding commit
non-static, and use it for freeing the "struct replay_opts"
constructed for "rebase" and "revert".
To safely call our new replay_opts_release() we'll need to stop
calling it in sequencer_remove_state(), and instead call it where we
allocate the "struct replay_opts" itself.
This is because in e.g. do_interactive_rebase() we construct a "struct
replay_opts" with "get_replay_opts()", and then call
"complete_action()". If we get far enough in that function without
encountering errors we'll call "pick_commits()" which (indirectly)
calls sequencer_remove_state() at the end.
But if we encounter errors anywhere along the way we'd punt out early,
and not free() the memory we allocated. Remembering whether we
previously called sequencer_remove_state() would be a hassle.
Using a FREE_AND_NULL() pattern would also work, as it would be safe
to call replay_opts_release() repeatedly. But let's fix this properly
instead, by having the owner of the data free() it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a "goto cleanup" pattern in do_interactive_rebase(). This
eliminates some duplicated free() code added in 53bbcfbde7 (rebase
-i: implement the main part of interactive rebase as a builtin,
2018-09-27), and sets us up for a subsequent commit which'll make
further use of the "cleanup" label.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been with us since this code was added in
ca02465b41 (push: use remote.$name.push as a refmap, 2013-12-03).
The "remote = remote_get(...)" added in the same commit would seem to
leak based only on the context here, but that function is a wrapper
for sticking the remotes we fetch into "the_repository->remote_state".
See fd3cb0501e (remote: move static variables into per-repository
struct, 2021-11-17) for the addition of code in repository.c that
free's the "remote" allocated here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set_refspecs() caller of refspec_append_mapped() (added in [1])
left open the question[2] of whether the "remote" we lazily fetch
might be NULL in the "[...]uniquely name our ref?" case, as
remote_get() can return NULL.
If we got past the "[...]uniquely name our ref?" case we'd have
already segfaulted if we tried to dereference it as
"remote->push.nr". In these cases the config mechanism & previous
remote validation will have bailed out earlier.
Let's refactor this code to clarify that, we'll now BUG() out if we
can't get a "remote", and will no longer retrieve it for these common
cases where we don't need it.
1. ca02465b41 (push: use remote.$name.push as a refmap, 2013-12-03)
2. https://lore.kernel.org/git/c0c07b89-7eaf-21cd-748e-e14ea57f09fd@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been with us since this code was introduced
in [1]. Later in [2] we started using FLEX_ALLOC_MEM() to allocate the
"struct command *".
1. 575f497456 (Add first cut at "git-receive-pack", 2005-06-29)
2. eb1af2df0b (git-receive-pack: start parsing ref update commands,
2005-06-29)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a memory leak introduced in [1], since that change didn't follow
the "goto done" pattern introduced in [2] we'd leak the "&buf" memory.
1. e4cdfe84a0 (merge: abort if index does not match HEAD for trivial
merges, 2022-07-23)
2. d5a35c114a (Copy resolve_ref() return value for longer use,
2011-11-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up 465028e0e2 (merge: add missing strbuf_release(),
2021-10-07) and address the "msg" memory leak in this block. We could
free "&msg" before the "goto done" here, but even better is to avoid
allocating it in the first place.
By repeating the "Fast-forward" string here we can avoid using a
"struct strbuf" altogether.
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop leaking the "head" variable, which we've been leaking since it
was originally added in [1], and in its current form since [2]
1. ed378ec7e8 (Make ref resolution saner, 2006-09-11)
2. d9e557a320 (show-branch: store resolved head in heap buffer,
2017-02-14).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the parse_options_concat() was added to this file in
84e4484f12 (commit-graph: use parse_options_concat(), 2021-08-23) we
wouldn't free() it if we returned early in these cases.
Since "result" is 0 by default we can "goto cleanup" in both cases,
and only need to set "result" if write_commit_graph_reachable() fails.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were leaking both the "struct strbuf" in prune_worktrees(), as well
as the "path" we got from should_prune_worktree(). Since these were
the only two uses of the "struct string_list" let's change it to a
"DUP" and push these to it with "string_list_append_nodup()".
For the string_list_append_nodup() we could also string_list_append()
the main_path.buf, and then strbuf_release(&main_path) right away. But
doing it this way avoids an allocation, as we already have the "struct
strbuf" prepared for appending to "kept".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cmd_repack() when we hit an error, replace "return ret" with "goto
cleanup" to ensure we free the necessary data structures.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "add_to_tip_table()" is called with a non-zero
"shorten_unambiguous" we always return an xstrdup()'d string, which
we'd then xstrdup() again, leaking memory. See [1] and [2] for how
this leak came about.
We could xstrdup() only if "shorten_unambiguous" wasn't true, but
let's instead inline this code, so that information on whether we need
to xstrdup() is contained within add_to_tip_table().
1. 98c5c4ad01 (name-rev: allow to specify a subpath for --refs
option, 2013-06-18)
2. b23e0b9353 (name-rev: allow converting the exact object name at
the tip of a ref, 2013-07-07)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix memory leaks resulting from a missing clear_pathspec().
- archive.c: Plug a leak in the "struct archiver_args", and
clear_pathspec() the "pathspec" member that the "parse_pathspec_arg()"
call in this function populates.
- builtin/clean.c: Fix a memory leak that's been with us since
893d839970 (clean: convert to use parse_pathspec, 2013-07-14).
- builtin/reset.c: Add clear_pathspec() calls to cmd_reset(),
including to the codepaths where we'd return early.
- builtin/stash.c: Call clear_pathspec() on the pathspec initialized
in push_stash().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an UNLEAK() added in 0c4542738e (clone: free or UNLEAK further
pointers when finished, 2021-03-14) to use a "to_free" pattern
instead. In this case the "repo" can be either this absolute_pathdup()
value, or in the "else if" branch seen in the context the the
"argv[0]" argument to "main()".
We can only free() the value in the former case, hence the "to_free"
pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0bfb48e672 (builtin/commit-graph.c: UNLEAK variables, 2018-10-03)
this was made to UNLEAK(), but we can just as easily invoke the
free_commit_graph() function added in c3756d5b7f (commit-graph: add
free_commit_graph, 2018-07-11) instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've removed "git-add--interactive.perl" let's replace
mentions of it with "add-interactive.c". In the case of the "git add"
documentation we were using it as an example filename, so the mention
wasn't wrong, but using a dead file is slightly confusing.
The "borrowed" comment here likewise isn't wrong, but let's mention
the successor file instead. In the case of pathspec.c the implied TODO
item should refer to the current code (and the comment may not even be
current, I didn't check).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the Perl "git-add--interactive" has gone away in the
preceding commit we don't need to pass along our desire for a mode as
a string, and can instead directly use the "enum add_p_mode", see
d2a233cb8b (built-in add -p: prepare for patch modes other than
"stage", 2019-12-21) for its introduction.
As a result of that the run_add_interactive() function would become a
trivial wrapper which would only run run_add_i() if a 0 (or now,
"NULL") "patch_mode" was provided. Let's instead remove it, and have
the one callsite that wanted the "NULL" case (interactive_add())
handle it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since [1] first released with Git v2.37.0 the built-in version of "add
-i" has been the default. That built-in implementation was added in
[2], first released with Git v2.25.0.
At this point enough time has passed to allow for finding any
remaining bugs in this new implementation, so let's remove the
fallback code.
As with similar migrations for "stash"[3] and "rebase"[4] we're
keeping a mention of "add.interactive.useBuiltin" in the
documentation, but adding a warning() to notify any outstanding users
that the built-in is now the default. As with [5] and [6] we should
follow-up in the future and eventually remove that warning.
1. 0527ccb1b5 (add -i: default to the built-in implementation,
2021-11-30)
2. f83dff60a7 (Start to implement a built-in version of `git add
--interactive`, 2019-11-13)
3. 8a2cd3f512 (stash: remove the stash.useBuiltin setting,
2020-03-03)
4. d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18)
5. deeaf5ee07 (stash: remove documentation for `stash.useBuiltin`,
2022-01-27)
6. 9bcde4d531 (rebase: remove transitory rebase.useBuiltin setting &
env, 2021-03-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strcspn(3) to find the length of a string terminated by NUL, NL or
slash instead of open-coding it. Adopt its return type, size_t, to
support strings of arbitrary length. Use that type in callers as well
for variables and function parameters that receive the return value.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.33:
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.32:
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.31:
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.30:
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
On my mirror of linux.git forkgroup with 780 islands, this saves
nearly 4G of heap memory in pack-objects. This savings only
benefits delta island users of pack bitmaps, as the process
would otherwise be exiting anyways.
However, there's probably not many delta island users, but the
majority of delta island users would also be pack bitmaps users.
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" often ignored incompatible options instead of
complaining, which has been corrected.
* en/rebase-incompatible-opts:
rebase: provide better error message for apply options vs. merge config
rebase: put rebase_options initialization in single place
rebase: fix formatting of rebase --reapply-cherry-picks option in docs
rebase: clarify the OPT_CMDMODE incompatibilities
rebase: add coverage of other incompatible options
rebase: fix incompatiblity checks for --[no-]reapply-cherry-picks
rebase: fix docs about incompatibilities with --root
rebase: remove --allow-empty-message from incompatible opts
rebase: flag --apply and --merge as incompatible
rebase: mark --update-refs as requiring the merge backend
When a user specifies a URI via 'git clone --bundle-uri', that URI may
be a bundle list that advertises a 'bundle.heuristic' value. In that
case, the Git client stores a 'fetch.bundleURI' config value storing
that URI.
Teach 'git fetch' to check for this config value and download bundles
from that URI before fetching from the Git remote(s). Likely, the bundle
provider has configured a heuristic (such as "creationToken") that will
allow the Git client to download only a portion of the bundles before
continuing the fetch.
Since this URI is completely independent of the remote server, we want
to be sure that we connect to the bundle URI before creating a
connection to the Git remote. We do not want to hold a stateful
connection for too long if we can avoid it.
To test that this works correctly, extend the previous tests that set
'fetch.bundleURI' to do follow-up fetches. The bundle list is updated
incrementally at each phase to demonstrate that the heuristic avoids
downloading older bundles. This includes the middle fetch downloading
the objects in bundle-3.bundle from the Git remote, and therefore not
needing that bundle in the third fetch.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle providers may organize their bundle lists in a way that is
intended to improve incremental fetches, not just initial clones.
However, they do need to state that they have organized with that in
mind, or else the client will not expect to save time by downloading
bundles after the initial clone. This is done by specifying a
bundle.heuristic value.
There are two types of bundle lists: those at a static URI and those
that are advertised from a Git remote over protocol v2.
The new fetch.bundleURI config value applies for static bundle URIs that
are not advertised over protocol v2. If the user specifies a static URI
via 'git clone --bundle-uri', then Git can set this config as a reminder
for future 'git fetch' operations to check the bundle list before
connecting to the remote(s).
For lists provided over protocol v2, we will want to take a different
approach and create a property of the remote itself by creating a
remote.<id>.* type config key. That is not implemented in this change.
Later changes will update 'git fetch' to consume this option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch <group>", when "<group>" of remotes lists the same
remote twice, unnecessarily failed when parallel fetching was
enabled, which has been corrected.
* cw/fetch-remote-group-with-duplication:
fetch: fix duplicate remote parallel fetch bug
When config which selects the merge backend (currently,
rebase.autosquash=true or rebase.updateRefs=true) conflicts with other
options on the command line (such as --whitespace=fix), make the error
message specifically call out the config option and specify how to
override that config option on the command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rebase manual noted several sets of incompatible options, but
we were missing tests for a few of these. Further, we were missing
code checks for one of these, which could result in command line
options being silently ignored.
Also, note that adding a check for autosquash means that using
--whitespace=fix together with the config setting rebase.autosquash=true
will trigger an error. A subsequent commit will improve the error
message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--[no-]reapply-cherry-picks was traditionally only supported by the
sequencer. Support was added for the apply backend, when --keep-base is
also specified, in commit ce5238a690 ("rebase --keep-base: imply
--reapply-cherry-picks", 2022-10-17). Make the code error out when
--[no-]reapply-cherry-picks is specified AND the apply backend is used
AND --keep-base is not specified. Also, clarify a number of comments
surrounding the interaction of these flags.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we flagged options which implied --apply as being
incompatible with options which implied --merge. But if both options
were given explicitly, then we didn't flag the incompatibility. The
same is true with --apply and --interactive. Add the check, and add
some testcases to verify these are also caught.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--update-refs is built in terms of the sequencer, which requires the
merge backend. It was already marked as incompatible with the apply
backend in the git-rebase manual, but the code didn't check for this
incompatibility and warn the user. Check and error now.
While at it, fix a typo in t3422...and fix some misleading wording
(most options which used to be am-specific have since been implemented
in the merge backend as well).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, t5619 demonstrates an issue where two calls to
`get_repo_path()` could trick Git into using its local clone mechanism
in conjunction with a non-local transport.
That sequence is:
- the starting state is that the local path https:/example.com/foo is a
symlink that points to ../../../.git/modules/foo. So it's dangling.
- get_repo_path() sees that no such path exists (because it's
dangling), and thus we do not canonicalize it into an absolute path
- because we're using --separate-git-dir, we create .git/modules/foo.
Now our symlink is no longer dangling!
- we pass the url to transport_get(), which sees it as an https URL.
- we call get_repo_path() again, on the url. This second call was
introduced by f38aa83f9a (use local cloning if insteadOf makes a
local URL, 2014-07-17). The idea is that we want to pull the url
fresh from the remote.c API, because it will apply any aliases.
And of course now it sees that there is a local file, which is a
mismatch with the transport we already selected.
The issue in the above sequence is calling `transport_get()` before
deciding whether or not the repository is indeed local, and not passing
in an absolute path if it is local.
This is reminiscent of a similar bug report in [1], where it was
suggested to perform the `insteadOf` lookup earlier. Taking that
approach may not be as straightforward, since the intent is to store the
original URL in the config, but to actually fetch from the insteadOf
one, so conflating the two early on is a non-starter.
Note: we pass the path returned by `get_repo_path(remote->url[0])`,
which should be the same as `repo_name` (aside from any `insteadOf`
rewrites).
We *could* pass `absolute_pathdup()` of the same argument, which
86521acaca (Bring local clone's origin URL in line with that of a remote
clone, 2008-09-01) indicates may differ depending on the presence of
".git/" for a non-bare repo. That matters for forming relative submodule
paths, but doesn't matter for the second call, since we're just feeding
it to the transport code, which is fine either way.
[1]: https://lore.kernel.org/git/CAMoD=Bi41mB3QRn3JdZL-FGHs4w3C2jGpnJB-CqSndO7FMtfzA@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git check-attr" learned to take an optional tree-ish to read the
.gitattributes file from.
* kn/attr-from-tree:
attr: add flag `--source` to work with tree-ish
t0003: move setup for `--all` into new block
"git ls-tree --format='%(path) %(path)' $tree $path" showed the
path three times, which has been corrected.
* rs/ls-tree-path-expansion-fix:
ls-tree: remove dead store and strbuf for quote_c_style()
ls-tree: fix expansion of repeated %(path)
Code clean-up to tighten the use of in-core index in the API.
* ab/cache-api-cleanup:
cache API: add a "INDEX_STATE_INIT" macro/function, add release_index()
read-cache.c: refactor set_new_index_sparsity() for subsequent commit
sparse-index API: BUG() out on NULL ensure_full_index()
sparse-index.c: expand_to_path() can assume non-NULL "istate"
builtin/difftool.c: { 0 }-initialize rather than using memset()
Since 1d0fa89 (checkout: add --ignore-other-wortrees, 2015-01-03) we
have a safety valve in checkout/switch to prevent the same branch from
being checked out simultaneously in multiple worktrees.
If a branch is bisected in a worktree while also being checked out in
another worktree; when the bisection is finished, checking out the
branch back in the current worktree may fail.
Let's teach bisect to use the "--ignore-other-worktrees" flag.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ab/bisect-cleanup:
bisect: no longer try to clean up left-over `.git/head-name` files
bisect: remove Cogito-related code
bisect run: fix the error message
bisect: verify that a bogus option won't try to start a bisection
bisect--helper: make the order consistently `argc, argv`
bisect--helper: simplify exit code computation
Code clean-up.
* tl/ls-tree-code-clean-up:
t3104: remove shift code in 'test_ls_tree_format'
ls-tree: cleanup the redundant SPACE
ls-tree: make "line_termination" less generic
ls-tree: fold "show_tree_data" into "cb" struct
ls-tree: use a "struct options"
ls-tree: don't use "show_tree_data" for "fast" callbacks
Code cleaning.
* rs/dup-array:
use DUP_ARRAY
add DUP_ARRAY
do full type check in BARF_UNLESS_COPYABLE
factor out BARF_UNLESS_COPYABLE
mingw: make argv2 in try_shell_exec() non-const
Fetching in parallel from a remote group with a duplicated remote results
in the following:
error: cannot lock ref '<ref>': is at <oid> but expected <oid>
This doesn't happen in serial since fetching from the same remote that
has already been fetched from is a noop. Therefore, remove any duplicated
remotes after remote groups are parsed.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In hash_object(), we open a descriptor for each file to hash (whether we
got the filename from the command line or --stdin-paths), but never
close it. For the traditional code path, which feeds the result to
index_fd(), this is OK; it closes the descriptor for us.
But 5ba9a93b39 (hash-object: add --literally option, 2014-09-11) added a
second code path, which does not close the descriptor. There we need to
do so ourselves.
You can see the problem in a clone of git.git like this:
$ git ls-files -s | grep ^100644 | cut -f2 |
git hash-object --stdin-paths --literally >/dev/null
fatal: could not open 'builtin/var.c' for reading: Too many open files
After this patch, it completes successfully. I didn't bother with a
test, as it's a pain to deal with descriptor limits portably, and the
fix is so trivial.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "repo" member was added to "the_index" in [1] the
repo_read_index() was made to populate it, but the unpopulated
"the_index" variable didn't get the same treatment.
Let's do that in initialize_the_repository() when we set it up, and
likewise for all of the current callers initialized an empty "struct
index_state".
This simplifies code that needs to deal with "the_index" or a custom
"struct index_state", we no longer need to second-guess this part of
the "index_state" deep in the stack. A recent example of such
second-guessing is the "istate->repo ? istate->repo : the_repository"
code in [2]. We can now simply use "istate->repo".
We're doing this by making use of the INDEX_STATE_INIT() macro (and
corresponding function) added in [3], which now have mandatory "repo"
arguments.
Because we now call index_state_init() in repository.c's
initialize_the_repository() we don't need to handle the case where we
have a "repo->index" whose "repo" member doesn't match the "repo"
we're setting up, i.e. the "Complete the double-reference" code in
repo_read_index() being altered here. That logic was originally added
in [1], and was working around the lack of what we now have in
initialize_the_repository().
For "fsmonitor-settings.c" we can remove the initialization of a NULL
"r" argument to "the_repository". This was added back in [4], and was
needed at the time for callers that would pass us the "r" from an
"istate->repo". Before this change such a change to
"fsmonitor-settings.c" would segfault all over the test suite (e.g. in
t0002-gitfile.sh).
This change has wider eventual implications for
"fsmonitor-settings.c". The reason the other lazy loading behavior in
it is required (starting with "if (!r->settings.fsmonitor) ..." is
because of the previously passed "r" being "NULL".
I have other local changes on top of this which move its configuration
reading to "prepare_repo_settings()" in "repo-settings.c", as we could
now start to rely on it being called for our "r". But let's leave all
of that for now, and narrowly remove this particular part of the
lazy-loading.
1. 1fd9ae517c (repository: add repo reference to index_state,
2021-01-23)
2. ee1f0c242e (read-cache: add index.skipHash config option,
2023-01-06)
3. 2f6b1eb794 (cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index(), 2023-01-12)
4. 1e0ea5c431 (fsmonitor: config settings are repository-specific,
2022-03-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/cache-api-cleanup:
cache API: add a "INDEX_STATE_INIT" macro/function, add release_index()
read-cache.c: refactor set_new_index_sparsity() for subsequent commit
sparse-index API: BUG() out on NULL ensure_full_index()
sparse-index.c: expand_to_path() can assume non-NULL "istate"
builtin/difftool.c: { 0 }-initialize rather than using memset()
Conditionally skip the pre-applypatch and applypatch-msg hooks when
applying patches with 'git am'.
* tr/am--no-verify:
am: allow passing --no-verify flag
Hopefully in some not so distant future, we'll get advantages from always
initializing the "repo" member of the "struct index_state". To make
that easier let's introduce an initialization macro & function.
The various ad-hoc initialization of the structure can then be changed
over to it, and we can remove the various "0" assignments in
discard_index() in favor of calling index_state_init() at the end.
While not strictly necessary, let's also change the CALLOC_ARRAY() of
various "struct index_state *" to use an ALLOC_ARRAY() followed by
index_state_init() instead.
We're then adding the release_index() function and converting some
callers (including some of these allocations) over to it if they
either won't need to use their "struct index_state" again, or are just
about to call index_state_init().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "subject_prefix" member of "struct revision" usually is set to a
borrowed string (either a string literal like "PATCH" that appear in
the program text as a hardcoded default, or the value of
"format.subjectprefix") and is never freed when the containing
revision structure is released. The "-v <num>" codepath however
violates this rule and stores a pointer to an allocated string to
this member, relinquishing the responsibility to free it when it is
done using the revision structure, leading to a small one-time leak.
Instead, keep track of the string it allocates to let the revision
structure borrow, and clean it up when it is done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop initializing "name" because it is set again before use.
Let quote_c_style() write directly to "sb" instead of taking a detour
through "quoted". This avoids an allocation and a string copy. The
result is the same because the function only appends.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_show_tree() borrows the base strbuf given to us by read_tree() to
build the full path of the current entry when handling %(path). Only
its indirect caller, show_tree_fmt(), removes the added entry name.
That works fine as long as %(path) is only included once in the format
string, but accumulates duplicates if it's repeated:
$ git ls-tree --format='%(path) %(path) %(path)' HEAD M*
Makefile MakefileMakefile MakefileMakefileMakefile
Reset the length after each use to get the same expansion every time;
here's the behavior with this patch:
$ ./git ls-tree --format='%(path) %(path) %(path)' HEAD M*
Makefile Makefile Makefile
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since [1] there has been no reason for keeping "git env--helper" a
built-in. The reason it was a built-in to begin with was to support
the GIT_TEST_GETTEXT_POISON mode removed in that commit. I.e. unlike
the rest of "test-tool" it would potentially be called by the
installed git via "git-sh-i18n.sh".
As none of that applies since [1] we should stop carrying this
technical debt, and move it to t/helper/*. As this mostly move-only
change shows this has the nice bonus that we'll stop wasting time
translating the internal-only strings it emits.
Even though this was a built-in, it was intentionally never
documented, see its introduction in [2]. It never saw use outside of
the test suite, except for the "GIT_TEST_GETTEXT_POISON" use-case
noted above.
1. d162b25f95 (tests: remove support for GIT_TEST_GETTEXT_POISON,
2021-01-20)
2. b4f207f339 (env--helper: new undocumented builtin wrapping
git_env_*(), 2019-06-21)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contents of the .gitattributes files may evolve over time, but "git
check-attr" always checks attributes against them in the working tree
and/or in the index. It may be beneficial to optionally allow the users
to check attributes taken from a commit other than HEAD against paths.
Add a new flag `--source` which will allow users to check the
attributes against a commit (actually any tree-ish would do). When the
user uses this flag, we go through the stack of .gitattributes files but
instead of checking the current working tree and/or in the index, we
check the blobs from the provided tree-ish object. This allows the
command to also be used in bare repositories.
Since we use a tree-ish object, the user can pass "--source
HEAD:subdirectory" and all the attributes will be looked up as if
subdirectory was the root directory of the repository.
We cannot simply use the `<rev>:<path>` syntax without the `--source`
flag, similar to how it is used in `git show` because any non-flag
parameter before `--` is treated as an attribute and any parameter after
`--` is treated as a pathname.
The change involves creating a new function `read_attr_from_blob`, which
given the path reads the blob for the path against the provided source and
parses the attributes line by line. This function is plugged into
`read_attr()` function wherein we go through the stack of attributes
files.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Co-authored-by: toon@iotcl.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An redundant space was found in ls-tree.c, which is no doubt
a small change, but it might be OK to make a commit on its own.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "ls-tree" command isn't capable of ending "lines" with anything
except '\n' or '\0', and in the latter case we can avoid calling
write_name_quoted_relative() entirely. Let's do that, less for
optimization and more for clarity, the write_name_quoted_relative()
API itself does much the same thing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the the preceding two commits the only user of the
"show_tree_data" struct needed it along with the "options" member,
let's instead fold all of that into a "show_tree_data" struct that
we'll use only for that callback.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a first step towards being able to turn this code into an API some
day let's change the "static" options in builtin/ls-tree.c into a
"struct ls_tree_options" that can be constructed dynamically without
the help of parse_options().
Because we're now using non-static variables for this we'll need to
clear_pathspec() at the end of cmd_ls_tree(), least various tests
start failing under SANITIZE=leak. The memory leak was already there
before, now it's just being brought to the surface.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in [1] the code that made it in as part of
9c4d58ff2c (ls-tree: split up "fast path" callbacks, 2022-03-23) was
a "maybe a good idea, maybe not" RFC-quality patch. I hadn't looked
very carefully at the resulting patterns.
The implementation shared the "struct show_tree_data data", which was
introduced in e81517155e (ls-tree: introduce struct "show_tree_data",
2022-03-23) both for use in 455923e0a1 (ls-tree: introduce "--format"
option, 2022-03-23), and because the "fat" callback hadn't been split
up as 9c4d58ff2c did.
Now that that's been done we can see that most of what
show_tree_common() was doing could be done lazily by the callbacks
themselves, who in the pre-image were often using an odd mis-match of
their own arguments and those same arguments stuck into the "data"
structure. Let's also have the callers initialize the "type", rather
than grabbing it from the "data" structure afterwards.
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220310T134811Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyronteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, there was this idea that Git would not actually be a
single coherent program, but rather a set of low-level programs that
users cobble together via shell scripts, or develop high-level user
interfaces for Git, or both.
Cogito was such a high-level user interface, incidentally implemented
via shell scripts that cobble together Git calls.
It did turn out relatively quickly that Git would much rather provide a
useful high-level user interface itself.
As of April 19th, 2007, Cogito was therefore discontinued (see
https://lore.kernel.org/git/20070419124648.GL4489@pasky.or.cz/).
Nevertheless, for almost 15 years after that announcement, Git carried
special code in `git bisect` to accommodate Cogito.
Since it is beyond doubt that there are no more Cogito users, let's
remove the last remnant of Cogito-accommodating code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), we ported the `bisect run` subcommand to C, including
the part that prints out an error message when the implicit `git bisect
bad` or `git bisect good` failed.
However, the error message was supposed to print out whether the state
was "good" or "bad", but used a bogus (because non-populated) `args`
variable for it. This was fixed in [1], but as of [2] (when
`bisect--helper` was changed to the present `bisect-state') the error
message still talks about implementation details that should not
concern end users.
Fix that, and add a regression test to ensure that the intended form of
the error message.
1. 80c2e9657f (bisect--helper: report actual bisect_state() argument
on error, 2022-01-18
2. f37d0bdd42 (bisect: fix output regressions in v2.30.0, 2022-11-10)
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C, the natural order is for `argc` to come before `argv` by virtue of
the `main()` function declaring the parameters in precisely that order.
It is confusing & distracting, then, when readers familiar with the C
language read code where that order is switched around.
Let's just change the order and avoid that type of developer friction.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We _already_ have a function to determine whether a given `enum
bisect_error` value is non-zero but still _actually_ indicates success.
Let's use it instead of duplicating the logic.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--exec" rebase collects the commands into a struct
string_list, then prepends "exec " to each command creating a multi line
string and finally splits that string back into a list of commands. This
is an artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we can
cleanup the way the argument is handled. There is no need to add the
"exec " prefix to the commands as that is added by todo_list_to_strbuf().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor an initialization of a variable added in
03831ef7b5 (difftool: implement the functionality in the builtin,
2017-01-19). This refactoring makes a subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we find a match, there is no point to try finding the second
match in the inner loop. Break out of the loop once we find the
first match.
Signed-off-by: Seija Kijin <doremylover123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for replace ALLOC_ARRAY+COPY_ARRAY with DUP_ARRAY
to reduce code duplication and apply its results.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous patch, using skip_prefix() is more readable and
less error-prone than a raw strncmp(), because it avoids a
manually-computed length. These cases differ from the previous patch
that uses starts_with() because they care about the value after the
matched prefix.
We can convert these to use skip_prefix() by introducing an extra
variable to hold the out-pointer.
Note in the case in ws.c that to get rid of the magic number "9"
completely, we also switch out "len" for recomputing the pointer
difference. These are equivalent because "len" is always "ep - string".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's more readable to use starts_with() instead of strncmp() to match a
prefix, as the latter requires a manually-computed length, and has the
funny "matching is zero" return value common to cmp functions. This
patch converts several cases which were found with:
git grep 'strncmp(.*, [0-9]*)'
But note that it doesn't convert all such cases. There are several where
the magic length number is repeated elsewhere in the code, like:
/* handle "buf" which isn't NUL-terminated and might be too small */
if (len >= 3 && !strncmp(buf, "foo", 3))
or:
/* exact match for "foo", but within a larger string */
if (end - buf == 3 && !strncmp(buf, "foo", 3))
While it would not produce the wrong outcome to use starts_with() in
these cases, we'd still be left with one instance of "3". We're better
to leave them for now, as the repeated "3" makes it clear that the two
are linked (there may be other refactorings that handle both, but
they're out of scope for this patch).
A few things to note while reading the patch:
- all cases but one are trying to match, and so lose the extra "!".
The case in the first hunk of urlmatch.c is not-matching, and hence
gains a "!".
- the case in remote-fd.c is matching the beginning of "connect foo",
but we never look at str+8 to parse the "foo" part (which would make
this a candidate for skip_prefix(), not starts_with()). This seems
at first glance like a bug, but is a limitation of how remote-fd
works.
- the second hunk in urlmatch.c shows some cases adjacent to other
strncmp() calls that are left. These are of the "exact match within
a larger string" type, as described above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
Fix to a small regression in 2.38 days.
* ab/bundle-wo-args:
bundle <cmd>: have usage_msg_opt() note the missing "<file>"
builtin/bundle.c: remove superfluous "newargc" variable
bundle: don't segfault on "git bundle <subcmd>"
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
The git-am --no-verify flag is analogous to the same flag passed to
git-commit. It bypasses the pre-applypatch and applypatch-msg hooks
if they are enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to honor format.mboxrd even when sending
patches to the standard output stream,
* ew/format-patch-mboxrd:
format-patch: support format.mboxrd with --stdout
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
Just like "git var GIT_EDITOR" abstracts the complex logic to
choose which editor gets used behind it, "git var" now give support
to GIT_SEQUENCE_EDITOR.
* sa/git-var-sequence-editor:
var: add GIT_SEQUENCE_EDITOR variable
Improve the usage we emit on e.g. "git bundle create" to note why
we're showing the usage, it's because the "<file>" argument is
missing.
We know that'll be the case for all parse_options_cmd_bundle() users,
as they're passing the "char **bundle_file" parameter, which as the
context shows we're expected to populate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in 891cb09db6 (bundle: don't segfault on "git bundle
<subcmd>", 2022-12-20) the "newargc" in this function is redundant to
using our own "argc". Let's refactor the function to avoid needlessly
introducing another variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. e77aa336f1 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c8626557 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7 (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131f (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git".
We need to convert both of these away from the global "--super-prefix"
at the same time, because "update" will call "clone", but "clone"
itself didn't make use of the global "--super-prefix" for displaying
paths. It was only on the list of sub-commands that accepted it
because "update"'s use of it would set it in its environment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git" itself. See
that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper sync" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git" itself. See
that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper foreach" to use its own "--super-prefix", instead
of relying on the global "--super-prefix" argument to "git"
itself. See that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" facility was introduced in [1] has always been a
transitory hack, which is why we've made it an error to supply it as
an option to "git" to commands that don't know about it.
That's been a good goal, as it has a global effect we haven't wanted
calls to get_super_prefix() from built-ins we didn't expect.
But it has meant that when we've had chains of different built-ins
using it all of the processes in that "chain" have needed to support
it, and worse processes that don't need it have needed to ask for
"SUPPORT_SUPER_PREFIX" because their parent process needs it.
That's how "fsmonitor--daemon" ended up with it, per [2] it's called
from (among other things) "submodule--helper absorbgitdirs", but as we
declared "submodule--helper" as "SUPPORT_SUPER_PREFIX" we needed to
declare "fsmonitor--daemon" as accepting it too, even though it
doesn't care about it.
But in the case of "absorbgitdirs" it only needed "--super-prefix" to
invoke itself recursively, and we'd never have another "in-between"
process in the chain. So we didn't need the bigger hammer of "git
--super-prefix", and the "setenv(GIT_SUPER_PREFIX_ENVIRONMENT, ...)"
that it entails.
Let's instead accept a hidden "--super-prefix" option to
"submodule--helper absorbgitdirs" itself.
Eventually (as with all other "--super-prefix" users) we'll want to
clean this code up so that this all happens in-process. I.e. needing
any variant of "--super-prefix" is itself a hack around our various
global state, and implicit reliance on "the_repository". This stepping
stone makes such an eventual change easier, as we'll need to deal with
less global state at that point.
The "fsmonitor--daemon" test adjusted here was added in [3]. To assert
that it didn't run into the "--super-prefix" message it was asserting
the output it didn't have. Let's instead assert the full output that
we *do* have, using the same pattern as a preceding change to
"t/t7412-submodule-absorbgitdirs.sh" used.
We could also remove the test entirely (as [4] did), but even though
the initial reason for having it is gone we're still getting some
marginal benefit from testing the "fsmonitor" and "submodule
absorbgitdirs" interaction, so let's keep it.
The change here to have either a NULL or non-"" string as a
"super_prefix" instead of the previous arrangement of "" or non-"" is
somewhat arbitrary. We could also decide to never have to check for
NULL.
As we'll be changing the rest of the "git --super-prefix" users to the
same pattern, leaving them all consistent makes sense. Why not pick ""
over NULL? Because that's how the "prefix" works[5], and having
"prefix" and "super_prefix" work the same way will be less
confusing. That "prefix" picked NULL instead of "" is itself
arbitrary, but as it's easy to make this small bit of our overall API
consistent, let's go with that.
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
3. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
4. https://lore.kernel.org/git/20221109004708.97668-5-chooglen@google.com/
5. 9725c8dda2 (built-ins: trust the "prefix" from run_builtin(),
2022-02-16)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start passing the "super_prefix" along as a parameter to
get_submodule_displaypath() and absorb_git_dir_into_superproject(),
rather than get the value directly as a global.
This is in preparation for subsequent commits, where we'll gradually
phase out get_super_prefix() for an alternative way of getting the
"super_prefix".
Most of the users of this get a get_super_prefix() value, either
directly or by indirection. The exceptions are:
- builtin/rm.c: Doesn't declare SUPPORT_SUPER_PREFIX, so we'd have
died if this was provided, so it's safe to pass "NULL".
- deinit_submodule(): The "deinit_submodule()" function has never been
able to use the "git -super-prefix". It will call
"absorb_git_dir_into_superproject()", but it will only do so from the
top-level project.
If "absorbgitdirs" recurses will use the "path" passed to
"absorb_git_dir_into_superproject()" in "deinit_submodule()" as its
starting "--super-prefix". So we can safely remove the
get_super_prefix() call here, and pass NULL instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mboxrd is a more robust output format when used with --stdout
and needs more exposure. Introducing this config knob lets
users choose the more robust format for all their --stdout
uses.
Relying on --pretty=mboxrd and including all of pretty-formats.txt
in the `git format-patch' documentation would likely be
confusing to users. Furthermore, this setting is useful across
multiple invocations. So introduce `format.mboxrd' as a boolean
configuration knob that changes the default --pretty=email format
to --pretty=mboxrd when (and only when) --stdout is in use.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change introduced the transport methods to acquire a bundle
list from the 'bundle-uri' protocol v2 command, when advertised _and_
when the client has chosen to enable the feature.
Teach Git to download and unbundle the data advertised by those bundles
during 'git clone'. This takes place between the ref advertisement and
the object data download, and stateful connections will linger while
the client downloads bundles. In the future, we should consider closing
the remote connection during this process.
Also, since the --bundle-uri option exists, we do not want to mix the
advertised bundles with the user-specified bundles.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since aef7d75e58 (builtin/bundle.c: let parse-options parse
subcommands, 2022-08-19) we've been segfaulting if no argument was
provided.
The fix is easy, as all of the "git bundle" subcommands require a
non-option argument we can check that we have arguments left after
calling parse-options().
This makes use of code added in 73c3253d75 (bundle: framework for
options before bundle file, 2019-11-10), before this change that code
has always been unreachable. In 73c3253d75 we'd never reach it as we
already checked "argc < 2" in cmd_bundle() itself.
Then when aef7d75e58 (whose segfault we're fixing here) migrated this
code to the subcommand API it removed that "argc < 2" check, but we
were still checking the wrong "argc" in parse_options_cmd_bundle(), we
need to check the "newargc". The "argc" will always be >= 1, as it
will necessarily contain at least the subcommand name
itself (e.g. "create").
As an aside, this could be safely squashed into this, but let's not do
that for this minimal segfault fix, as it's an unrelated refactoring:
--- a/builtin/bundle.c
+++ b/builtin/bundle.c
@@ -55,13 +55,12 @@ static int parse_options_cmd_bundle(int argc,
const char * const usagestr[],
const struct option options[],
char **bundle_file) {
- int newargc;
- newargc = parse_options(argc, argv, NULL, options, usagestr,
+ argc = parse_options(argc, argv, NULL, options, usagestr,
PARSE_OPT_STOP_AT_NON_OPTION);
- if (!newargc)
+ if (!argc)
usage_with_options(usagestr, options);
*bundle_file = prefix_filename(prefix, argv[0]);
- return newargc;
+ return argc;
}
static int cmd_bundle_create(int argc, const char **argv, const char *prefix) {
Reported-by: Hubert Jasudowicz <hubertj@stmcyber.pl>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Hubert Jasudowicz <hubertj@stmcyber.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the diff machinery prepares the options array for the
parse_options API has been refactored to avoid resource leaks.
* rs/diff-parseopts:
diff: remove parseopts member from struct diff_options
diff: use add_diff_options() in diff_opt_parse()
diff: factor out add_diff_options()
The editor program used by Git when editing the sequencer "todo" file
is determined by examining a few environment variables and also
affected by configuration variables. Introduce "git var
GIT_SEQUENCE_EDITOR" to give users access to the final result of the
logic without having to know the exact details.
This is very similar in spirit to 44fcb497 (Teach git var about
GIT_EDITOR, 2009-11-11) that introduced "git var GIT_EDITOR".
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git var UNKNOWN_VARIABLE" and "git var VARIABLE" with the variable
given an empty value used to behave identically. Now the latter
just gives an empty output, while the former still gives an error
message.
* sa/git-var-empty:
var: allow GIT_EDITOR to return null
var: do not print usage() with a correct invocation
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
"merge-tree" learns a new `--merge-base` option.
* kz/merge-tree-merge-base:
docs: fix description of the `--merge-base` option
merge-tree.c: allow specifying the merge-base when --stdin is passed
merge-tree.c: add --merge-base=<commit> option
`git bisect` becomes a builtin.
* dd/git-bisect-builtin:
bisect; remove unused "git-bisect.sh" and ".gitignore" entry
Turn `git bisect` into a full built-in
bisect--helper: log: allow arbitrary number of arguments
bisect--helper: handle states directly
bisect--helper: emit usage for "git bisect"
bisect test: test exit codes on bad usage
bisect--helper: identify as bisect when report error
bisect-run: verify_good: account for non-negative exit status
bisect run: keep some of the post-v2.30.0 output
bisect: fix output regressions in v2.30.0
bisect: refactor bisect_run() to match CodingGuidelines
bisect tests: test for v2.30.0 "bisect run" regressions
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply_parse_options() passes the array of argument strings to
parse_options(), which removes recognized options. The removed strings
are not freed, though.
Make a copy of the strvec to pass to the function to retain the pointers
of its strings, so we release them all at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for pthread_create and pthread_sigmask state that:
"On success, pthread_create() returns 0;
on error, it returns an error number"
As such, we ought to check for an error
by seeing if the output is not 0.
Checking for "less than" is a mistake
as the error code numbers can be greater than 0.
Signed-off-by: Seija <doremylover123@gmail.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix racy tests in t7527 by forcing the use of cookie files during all
types of queries. There were originaly observed on M1 macs with file
system encryption enabled.
There were a series of simple tests, such as "edit some files" and
"create some files", that started the daemon with GIT_TRACE_FSMONITOR
enabled so that the daemon would emit "event: <path>" messages to the
trace log. The test would make worktree modifications and then grep
the log file to confirm it contained the expected trace messages.
The greps would occasionally racily-fail. The expected messages
were always present in the log file, just not yet always present
when the greps ran.
NEEDSWORK: One could argue that the tests should use the `test-tool
fsmonitor-client query` and search for the expected pathnames in the
output rather than grepping the trace log, but I'll leave that for a
later exercise.
The racy tests called `test-tool fsmonitor-client query --token 0`
before grepping the log file. (Presumably to introduce a small delay
and/or to let the daemon sync with the file system following the last
modification, but that was not always sufficient and hence the race.)
When the query arg is just "0", the daemon treated it as a V1
(aka timestamp-relative request) and responded with a "trivial
response" and a new token, but without trying to catch up to the
the file system event stream. So the "event: <path>" messages
may or may not yet be in the log file when the grep commands
started.
FWIW, if the tests had sent `--token builtin:0:0` instead, it would
have forced a slightly different code path in the daemon that would
cause the daemon to use a cookie file and let it catch up with the
file system event stream. I did not see any test failures with this
change.
Instead of modifying the test, I updated the fsmonitor--daemon to
always use a cookie file and catch up to the file system on any
query operation, regardless of the format of the request token.
This is safer.
FWIW, I think the effect of the race was limited to the test.
Commands like `git status` would always do a full scan when getting a
trivial response. The fact that the daemon was slighly behind the
file system when it generated the response token would cause a second
`git status` to get a few extra paths that the client would have to
examine, but it would not be missing paths.
FWIW, I also think that an earlier version of the code always did
the cookie file for all types of queries, but it was optimized out
during a round of reviews or rework and we didn't notice the race.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for appending the parseopts member of struct diff_options
to a struct option array. Use it in two sites instead of accessing the
parseopts member directly. Decoupling callers from diff internals like
that allows us to change the latter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects uses OPT_PARSE_LIST_OBJECTS_FILTER_INIT() to initialize the
a rev_info struct lazily before populating its filter member using the
--filter option values. It tracks whether the initialization is needed
using the .have_revs member of the callback data.
There is a better way: Use a stand-alone list_objects_filter_options
struct and build a rev_info struct with its .filter member after option
parsing. This allows using the simpler OPT_PARSE_LIST_OBJECTS_FILTER()
and getting rid of the extra callback mechanism.
Even simpler would be using a struct rev_info as before 5cb28270a1
(pack-objects: lazily set up "struct rev_info", don't leak, 2022-03-28),
but that would expose a memory leak caused by repo_init_revisions()
followed by release_revisions() without a setup_revisions() call in
between.
Using list_objects_filter_options also allows pushing the rev_info
struct into get_object_list(), where it arguably belongs. Either way,
this is all left for later.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5cb28270a1 (pack-objects: lazily set up "struct rev_info", don't
leak, 2022-03-28) --filter options given to git pack-objects overrule
earlier ones, letting only the leftmost win and leaking the memory
allocated for earlier ones. Fix that by only initializing the rev_info
struct once.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git prune" may try to iterate over .git/objects/pack for trash
files to remove in it, and loudly fail when the directory is
missing, which is not necessary. The command has been taught to
ignore such a failure.
* ew/prune-with-missing-objects-pack:
prune: quiet ENOENT on missing directories
The handling to die early when there is no EDITOR is valuable when
used in normal code (i.e., editor.c). In git-var, where
null/empty-string is a perfectly valid value to return, it doesn't
make as much sense.
Remove this handling from `git var GIT_EDITOR` so that it does not
fail so noisily when there is no defined editor.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, git-var could print usage() even if the command was invoked
correctly with a variable defined in git_vars -- provided that its
read() function returned NULL.
Now, we only print usage() only if it was called with a logical
variable that wasn't defined -- regardless of read().
Since we now know the variable is valid when we call read_var(), we
can avoid printing usage() here (and exiting with code 129) and
instead exit quietly with code 1. While exiting with a different code
can be a breaking change, it's far better than changing the exit
status more generally from 'failure' to 'success'.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
'git maintenance register' is taught to write configuration to an
arbitrary path, and 'git for-each-repo' is taught to expand tilde
characters in paths.
* rp/maintenance-qol:
builtin/gc.c: fix use-after-free in maintenance_unregister()
maintenance --unregister: fix uninit'd data use & -Wdeclaration-after-statement
maintenance: add option to register in a specific config
for-each-repo: interpolate repo path arguments
Fix a regression in the bisect-helper which mistakenly treats
arguments to the command given to 'git bisect run' as arguments to
the helper.
* dd/bisect-helper-subcommand:
bisect--helper: parse subcommand with OPT_SUBCOMMAND
bisect--helper: move all subcommands into their own functions
bisect--helper: remove unused options
Preparation to remove git-submodule.sh and replace it with a builtin.
* ab/submodule-helper-prep-only:
submodule--helper: use OPT_SUBCOMMAND() API
submodule--helper: drop "update --prefix <pfx>" for "-C <pfx> update"
submodule--helper: remove --prefix from "absorbgitdirs"
submodule API & "absorbgitdirs": remove "----recursive" option
submodule.c: refactor recursive block out of absorb function
submodule tests: test for a "foreach" blind-spot
submodule--helper: fix a memory leak in "status"
submodule tests: add tests for top-level flag output
submodule--helper: move "config" to a test-tool
$GIT_DIR/objects/pack may be removed to save inodes in shared
repositories. Quiet down prune in cases where either
$GIT_DIR/objects or $GIT_DIR/objects/pack is non-existent,
but emit the system error in other cases to help users diagnose
permissions problems or resource constraints.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a lot of uses of UNLEAK() it would be quite tricky to release the
memory involved, or we're missing the relevant *_(release|clear)()
functions. But in these cases we have them already, and can just
invoke them on the variable(s) involved, instead of UNLEAK().
For "builtin/worktree.c" the UNLEAK() was also added in [1], but the
struct member it's unleaking was removed in [2]. The only non-"int"
member of that structure is "const char *keep_locked", which comes to
us via "argv" or a string literal[3].
We have good visibility via the compiler and
tooling (e.g. SANITIZE=address) on bad free()-ing, but none on
UNLEAK() we don't need anymore. So let's prefer releasing the memory
when it's easy.
For "bugreport", "worktree" and "config" we need to start using a "ret
= ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were
added in [4], and for "builtin/config.c" in [1].
For "config" the code seen here was the only user of the "value"
variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to
return the right exit code in the cases where we were relying on
falling through to the top-level.
I think there's still a use-case for UNLEAK(), but hat it's changed
since then. Using it so that "we can see the real leaks" is
counter-productive in these cases.
It's more useful to have UNLEAK() be a marker of the remaining odd
cases where it's hard to free() the memory for whatever reason. With
this change less than 20 of them remain in-tree.
1. 0e5bba53af (add UNLEAK annotation for reducing leak false
positives, 2017-09-08)
2. d861d34a6e (worktree: remove extra members from struct add_opts,
2018-04-24)
3. 0db4961c49 (worktree: teach `add` to accept --reason <string> with
--lock, 2021-07-15)
4. 0e5bba53af and 00d8c31105 (commit: fix "author_ident" leak,
2022-05-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Free memory from parse_options_concat(), which comes from code
originally added (then extended) in [1].
At this point we could get several more tests leak-free by free()-ing
the xstrdup() just above the line being changed, but that one's
trickier than it seems. The sequencer_remove_state() function
supposedly owns it, but sometimes we don't call it. I have a fix for
it, but it's non-trivial, so let's fix the easy one first.
1. c62f6ec341 (revert: add --ff option to allow fast forward when
cherry-picking, 2010-03-06)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_cherry_pick(), as well as
freeing the xmalloc()'d "revs" member itself.
This is the same change as the one made for cmd_revert() a few lines
above it in fd74ac95ac (revert: free "struct replay_opts" members,
2022-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix a leak in the recent 6159e7add4 (rebase --abort: improve reflog
message, 2022-10-12). Before that commit we'd strbuf_release() the
reflog message we were formatting, but when that code was refactored
to use "ropts.head_msg" the strbuf_release() was omitted.
Ideally the three users of "ropts" in cmd_rebase() should use
different "ropts" variables, in practice they're completely separate,
as this and the other user in the "switch" statement will "goto
cleanup", which won't touch "ropts".
The third caller after the "switch" is then unreachable if we take
these two branches, so all of them are getting a "{ 0 }" init'd
"ropts".
So it's OK that we're leaving a stale pointer in "ropts.head_msg",
cleaning it up was our responsibility, and it won't be used again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix a memory leak in overlay_tree_on_index(), we need to
clear_pathspec() at some point, which might as well be after the last
time we use it in the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix a leak that's been with us since 3407bb4940 (Add "unpack-file"
helper that unpacks a sha1 blob into a tmpfile., 2005-04-18). See
00c8fd493a (cat-file: use streaming API to print blobs, 2012-03-07)
for prior art which shows the same API pattern, i.e. free()-ing the
result of read_object_file() after it's used.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix various leaks in built-ins, libraries and a test helper here we
were missing a call to strbuf_release(), string_list_clear() etc, or
were calling them after a potential "return".
Comments on individual changes:
- builtin/checkout.c: Fix a memory leak that was introduced in [1]. A
sibling leak introduced in [2] was recently fixed in [3]. As with [3]
we should be using the wt_status_state_free_buffers() API introduced
in [4].
- builtin/repack.c: Fix a leak that's been here since this use of
"strbuf_release()" was added in a1bbc6c017 (repack: rewrite the shell
script in C, 2013-09-15). We don't use the variable for anything
except this loop, so we can instead free it right afterwards.
- builtin/rev-parse: Fix a leak that's been here since this code was
added in 21d4783538 (Add a parseopt mode to git-rev-parse to bring
parse-options to shell scripts., 2007-11-04).
- builtin/stash.c: Fix a couple of leaks that have been here since
this code was added in d4788af875 (stash: convert create to builtin,
2019-02-25), we strbuf_release()'d only some of the "struct strbuf" we
allocated earlier in the function, let's release all of them.
- ref-filter.c: Fix a leak in 482c119186 (gpg-interface: improve
interface for parsing tags, 2021-02-11), we don't use the "payload"
variable that we ask parse_signature() to populate for us, so let's
free it.
- t/helper/test-fake-ssh.c: Fix a leak that's been here since this
code was added in 3064d5a38c (mingw: fix t5601-clone.sh,
2016-01-27). Let's free the "struct strbuf" as soon as we don't need
it anymore.
1. c45f0f525d (switch: reject if some operation is in progress,
2019-03-29)
2. 2708ce62d2 (branch: sort detached HEAD based on a flag,
2021-01-07)
3. abcac2e19f (ref-filter.c: fix a leak in get_head_description,
2022-09-25)
4. 962dd7ebc3 (wt-status: introduce wt_status_state_free_buffers(),
2020-09-27).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The read_cache() in prepare_to_commit() would end up clobbering the
pointer we had for a previously populated "the_index.cache_tree" in
the very common case of "git commit" stressed by e.g. the tests being
changed here.
We'd populate "the_index.cache_tree" by calling
"update_main_cache_tree" in prepare_index(), but would not end up with
a "fully prepared" index. What constitutes an existing index is
clearly overly fuzzy, here we'll check "active_nr" (aka
"the_index.cache_nr"), but our "the_index.cache_tree" might have been
malloc()'d already.
Thus the code added in 11c8a74a64 (commit: write cache-tree data when
writing index anyway, 2011-12-06) would end up allocating the
"cache_tree", and would interact here with code added in
7168624c35 (Do not generate full commit log message if it is not
going to be used, 2007-11-28). The result was a very common memory
leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
These two built-ins both deal with the index, but weren't discarding
it. In subsequent commits we'll add more free()-ing to discard_index()
that we've missed, but let's first call the existing function.
We can doubtless add discard_index() (or its alias discard_cache()) to
a lot more places, but let's just add it here for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "USE_THE_INDEX_COMPATIBILITY_MACROS" into that setting
and a more narrow "USE_THE_INDEX_VARIABLE". In the case of these
built-ins we only need "the_index" variable, but not the compatibility
wrapper for functions we're not using.
Let's then have some users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use
this more narrow and descriptive define.
For context: The USE_THE_INDEX_COMPATIBILITY_MACROS macro was added to
test-tool.h in f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discard_index() function has not returned non-zero since
7a51ed66f6 (Make on-disk index representation separate from in-core
one, 2008-01-14), but we've had various code in-tree still acting as
though that might be the case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding "USE_THE_INDEX_COMPATIBILITY_MACROS" to these two appears to
have been unnecessary from the start, as going back and compiling
f8adbec9fe (cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch,
2019-01-24) without that addition works.
Let's not have these ask for the compatibility macros from cache.h
that they don't need.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid calling 'cache_tree_update()' when doing so would be redundant.
* vd/skip-cache-tree-update:
rebase: use 'skip_cache_tree_update' option
read-tree: use 'skip_cache_tree_update' option
reset: use 'skip_cache_tree_update' option
unpack-trees: add 'skip_cache_tree_update' option
cache-tree: add perf test comparing update and prime
"git repack" learns to send cruft objects out of the way into
packfiles outside the repository.
* tb/repack-expire-to:
builtin/repack.c: implement `--expire-to` for storing pruned objects
builtin/repack.c: write cruft packs to arbitrary locations
builtin/repack.c: pass "cruft_expiration" to `write_cruft_pack`
builtin/repack.c: pass "out" to `prepare_pack_objects`
Since 52d59cc645 (branch: add a --copy (-c) option to go with --move
(-m), 2017-06-18) we can copy a branch to make a new branch with the
'-c' (copy) option or to overwrite an existing branch using the '-C'
(force copy) option. A no-op possibility is considered when we are
asked to copy a branch to itself, to follow the same no-op introduced
for the rename (-M) operation in 3f59481e33 (branch: allow a no-op
"branch -M <current-branch> HEAD", 2011-11-25). To check for this, in
52d59cc645 we compared the branch names provided by the user, source
(HEAD if omitted) and destination, and a match is considered as this
no-op.
Since ae5a6c3684 (checkout: implement "@{-N}" shortcut name for N-th
last branch, 2009-01-17) a branch can be specified using shortcuts like
@{-1}. This allows this usage:
$ git checkout -b test
$ git checkout -
$ git branch -C test test # no-op
$ git branch -C test @{-1} # oops
$ git branch -C @{-1} test # oops
As we are using the branch name provided by the user to do the
comparison, if one of the branches is provided using a shortcut we are
not going to have a match and a call to git_config_copy_section() will
happen. This will make a duplicate of the configuration for that
branch, and with this progression the second call will produce four
copies of the configuration, and so on.
Let's use the interpreted branch name instead for this comparison.
The rename operation is not affected.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When serving a push, git-receive-pack(1) needs to verify that the
packfile sent by the client contains all objects that are required by
the updated references. This connectivity check works by marking all
preexisting references as uninteresting and using the new reference tips
as starting point for a graph walk.
Marking all preexisting references as uninteresting can be a problem
when it comes to performance. Git forges tend to do internal bookkeeping
to keep alive sets of objects for internal use or make them easy to find
via certain references. These references are typically hidden away from
the user so that they are neither advertised nor writeable. At GitLab,
we have one particular repository that contains a total of 7 million
references, of which 6.8 million are indeed internal references. With
the current connectivity check we are forced to load all these
references in order to mark them as uninteresting, and this alone takes
around 15 seconds to compute.
We can optimize this by only taking into account the set of visible refs
when marking objects as uninteresting. This means that we may now walk
more objects until we hit any object that is marked as uninteresting.
But it is rather unlikely that clients send objects that make large
parts of objects reachable that have previously only ever been hidden,
whereas the common case is to push incremental changes that build on top
of the visible object graph.
This provides a huge boost to performance in the mentioned repository,
where the vast majority of its refs hidden. Pushing a new commit into
this repo with `transfer.hideRefs` set up to hide 6.8 million of 7 refs
as it is configured in Gitaly leads to a 4.5-fold speedup:
Benchmark 1: main
Time (mean ± σ): 30.977 s ± 0.157 s [User: 30.226 s, System: 1.083 s]
Range (min … max): 30.796 s … 31.071 s 3 runs
Benchmark 2: pks-connectivity-check-hide-refs
Time (mean ± σ): 6.799 s ± 0.063 s [User: 6.803 s, System: 0.354 s]
Range (min … max): 6.729 s … 6.850 s 3 runs
Summary
'pks-connectivity-check-hide-refs' ran
4.56 ± 0.05 times faster than 'main'
As we mostly go through the same codepaths even in the case where there
are no hidden refs at all compared to the code before there is no change
in performance when no refs are hidden:
Benchmark 1: main
Time (mean ± σ): 48.188 s ± 0.432 s [User: 49.326 s, System: 5.009 s]
Range (min … max): 47.706 s … 48.539 s 3 runs
Benchmark 2: pks-connectivity-check-hide-refs
Time (mean ± σ): 48.027 s ± 0.500 s [User: 48.934 s, System: 5.025 s]
Range (min … max): 47.504 s … 48.500 s 3 runs
Summary
'pks-connectivity-check-hide-refs' ran
1.00 ± 0.01 times faster than 'main'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a new `--exclude-hidden=` option that is similar to the one we just
added to git-rev-list(1). Given a section name `uploadpack` or `receive`
as argument, it causes us to exclude all references that would be hidden
by the respective `$section.hideRefs` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The functions that handle exclusion of refs work on a single string
list. We're about to add a second mechanism for excluding refs though,
and it makes sense to reuse much of the same architecture for both kinds
of exclusion.
Introduce a new `struct ref_exclusions` that encapsulates all the logic
related to excluding refs and move the `struct string_list` that holds
all wildmatch patterns of excluded refs into it. Rename functions that
operate on this struct to match its name.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We're about to add a new argument to git-rev-list(1) that allows it to
add all references that are visible when taking `transfer.hideRefs` et
al into account. This will require us to potentially parse multiple sets
of hidden refs, which is not easily possible right now as there is only
a single, global instance of the list of parsed hidden refs.
Refactor `parse_hide_refs_config()` and `ref_is_hidden()` so that both
take the list of hidden references as input and adjust callers to keep a
local list, instead. This allows us to easily use multiple hidden-ref
lists. Furthermore, it allows us to properly free this list before we
exit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When `git notes` prepares the template it adds an empty newline between
the comment header and the content:
>
> #
> # Write/edit the notes for the following object:
>
> # commit 0f3c55d4c2
> # etc
This is wrong structurally because that newline is part of the comment,
too, and thus should be commented. Also, it throws off some positioning
strategies of editors and plugins, and it differs from how we do commit
templates.
Change this to follow the standard set by `git commit`:
>
> #
> # Write/edit the notes for the following object:
> #
> # commit 0f3c55d4c2
>
Tests pass unchanged after this code change.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
While trying to fix a move based on an uninitialized value (along with a
declaration after the first statement), be0fd57228
(maintenance --unregister: fix uninit'd data use &
-Wdeclaration-after-statement, 2022-11-15) unintentionally introduced a
use-after-free.
The problem arises when `maintenance_unregister()` sees a non-NULL
`config_file` string and thus tries to call
git_configset_get_value_multi() to lookup the corresponding values.
We store the result off, and then call git_configset_clear(), which
frees the pointer that we just stored. We then try to read that
now-freed pointer a few lines below, and there we have our
use-after-free:
$ ./t7900-maintenance.sh -vxi --run=23 --valgrind
[...]
+ git maintenance unregister --config-file ./other
==3048727== Invalid read of size 8
==3048727== at 0x1869CA: maintenance_unregister (gc.c:1590)
==3048727== by 0x188F42: cmd_maintenance (gc.c:2651)
==3048727== by 0x128C62: run_builtin (git.c:466)
==3048727== by 0x12907E: handle_builtin (git.c:721)
==3048727== by 0x1292EC: run_argv (git.c:788)
==3048727== by 0x12988E: cmd_main (git.c:926)
==3048727== by 0x21ED39: main (common-main.c:57)
==3048727== Address 0x4b38bc8 is 24 bytes inside a block of size 64 free'd
==3048727== at 0x484617B: free (vg_replace_malloc.c:872)
==3048727== by 0x2D207E: free_individual_entries (hashmap.c:188)
==3048727== by 0x2D2153: hashmap_clear_ (hashmap.c:207)
==3048727== by 0x270B5C: git_configset_clear (config.c:2375)
==3048727== by 0x1869AC: maintenance_unregister (gc.c:1585)
==3048727== by 0x188F42: cmd_maintenance (gc.c:2651)
==3048727== by 0x128C62: run_builtin (git.c:466)
==3048727== by 0x12907E: handle_builtin (git.c:721)
==3048727== by 0x1292EC: run_argv (git.c:788)
==3048727== by 0x12988E: cmd_main (git.c:926)
==3048727== by 0x21ED39: main (common-main.c:57)
[...]
Resolve this via a partial-revert of be0fd57228. The config_set struct
now gets a zero initialization, which makes free()-ing it a noop even
without calling git_configset_init(). When we do initialize it to a
non-zero value, it is only free()'d after our last read of `list`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Since (maintenance: add option to register in a specific config,
2022-11-09) we've been unable to build with "DEVELOPER=1" without
"DEVOPTS=no-error", as the added code triggers a
"-Wdeclaration-after-statement" warning.
And worse than that, the data handed to git_configset_clear() is
uninitialized, as can be spotted with e.g.:
./t7900-maintenance.sh -vixd --run=23 --valgrind
[...]
+ git maintenance unregister --force
Conditional jump or move depends on uninitialised value(s)
at 0x6B5F1E: git_configset_clear (config.c:2367)
by 0x4BA64E: maintenance_unregister (gc.c:1619)
by 0x4BD278: cmd_maintenance (gc.c:2650)
by 0x409905: run_builtin (git.c:466)
by 0x40A21C: handle_builtin (git.c:721)
by 0x40A58E: run_argv (git.c:788)
by 0x40AF68: cmd_main (git.c:926)
by 0x5D39FE: main (common-main.c:57)
Uninitialised value was created by a stack allocation
at 0x4BA22C: maintenance_unregister (gc.c:1557)
Let's fix both of these issues, and also move the scope of the
variable to the "if" statement it's used in, to make it obvious where
it's used.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
maintenance register currently records the maintenance repo exclusively
within the user's global configuration, but other configuration files
may be relevant when running maintenance if they are included from the
global config. This option allows the user to choose where maintenance
repos are recorded.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This is a quality of life change for git-maintenance, so repos can be
recorded with the tilde syntax. The register subcommand will not record
repos in this format by default.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Git learned pushing submodules without pushing the superproject by
the user specifying --recurse-submodules=only through 6c656c3fe4
("submodules: add RECURSE_SUBMODULES_ONLY value", 2016-12-20) and
225e8bf778 ("push: add option to push only submodules", 2016-12-20).
For users who use this feature regularly, it is desirable to have an
equivalent configuration.
It turns out that such a configuration (push.recurseSubmodules=only) is
already supported, even though it is neither documented nor mentioned
in the commit messages, due to the way the --recurse-submodules=only
feature was implemented (a function used to parse --recurse-submodules
was updated to support "only", but that same function is used to parse
push.recurseSubmodules too). What is left is to document it and test it,
which is what this commit does.
There is a possible point of confusion when recursing into a submodule
that itself has the push.recurseSubmodules=only configuration, because
if a repository has only its submodules pushed and not itself, its
superproject can never be pushed. Therefore, treat such configurations
as being "on-demand", and print a warning message.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The previous commit added a `--merge-base` option in order to allow
using a specified merge-base for the merge. Extend the input accepted
by `--stdin` to also allow a specified merge-base with each merge
requested. For example:
printf "<b3> -- <b1> <b2>" | git merge-tree --stdin
does a merge of b1 and b2, and uses b3 as the merge-base.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This patch will give our callers more flexibility to use `git merge-tree`,
such as:
git merge-tree --write-tree --merge-base=branch^ HEAD branch
This does a merge of HEAD and branch, but uses branch^ as the merge-base.
And the reason why using an option flag instead of a positional argument
is to allow additional commits passed to merge-tree to be handled via an
octopus merge in the future.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Now that the shell script hands off to the `bisect--helper` to do
_anything_ (except to show the help), it is but a tiny step to let the
helper implement the actual `git bisect` command instead.
This retires `git-bisect.sh`, concluding a multi-year journey that many
hands helped with, in particular Pranit Bauna, Tanushree Tumane and
Miriam Rubio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we would like to turn bisect into a builtin by
renaming bisect--helper.
However, there's an oddity that "git bisect log" accepts any number of
arguments and it will just ignore them all.
Let's prepare for the next step by ignoring any arguments passed to
"git bisect--helper log"
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In preparation for making `git bisect` a real built-in, let's prepare
the `bisect--helper` built-in to handle `git bisect--helper good` and
`git bisect--helper bad`, i.e. eliminate the need of `state` subcommand.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In subsequent commits we'll be removing "git-bisect.sh" in favor of
promoting "bisect--helper" to a "bisect" built-in.
In doing that we'll first need to have it support "git bisect--helper
<cmd>" rather than "git bisect--helper --<cmd>", and then finally have
its "-h" output claim to be "bisect" rather than "bisect--helper".
Instead of suffering that churn let's start claiming to be "git
bisect" now. In just a few commits this will be true, and in the
meantime emitting the "wrong" usage information from the helper is a
small price to pay to avoid the churn.
Let's also declare "BUILTIN_*" macros, when we eventually migrate the
sub-commands themselves to parse_options() we'll be able to re-use the
strings. See 0afd556b2e (worktree: define subcommand -h in terms of
command -h, 2022-10-13) for a recent example.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we will convert the bisect--helper to be builtin
bisect. Let's start by self-identifying it's the real bisect when reporting
error.
This change is safe since 'git bisect--helper' is an implementation
detail, users aren't expected to call 'git bisect--helper'.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Some system never reports negative exit code at all, they reports them
as bigger-than-128 instead. We take extra care for those systems in the
later check for normal 'do_bisect_run' loop.
Let's check it here, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Preceding commits fixed output and behavior regressions in
d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), which did not claim to be changing the output of
"git bisect run".
But some of the output it emitted was subjectively better, so once
we've asserted that we're back on v2.29.0 behavior, let's change some
of it back:
- We now quote the arguments again, but omit the first " " when
printing the "running" line.
- Ditto for other cases where we emitted the argument
- We say "found first bad commit" again, not just "run success"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13) reimplemented parts of "git bisect run" in
C it changed the output we emitted so that:
- The "running ..." line was now quoted
- We lost the \n after our output
- We started saying "bisect found ..." instead of "bisect run success"
Arguably some of this is better now, but as d1bbbe45df did not
advocate for changing the output, let's revert this for now. It'll be
easy to change it back if that's what we'd prefer.
This does not change the one remaining use of "command.buf" to emit
the quoted argument, as that's new in d1bbbe45df.
Some of these cases were not tested for in the tests added in the
preceding commit, I didn't have time to fleshen those out, but a look
at f1de981e8b will show that the other output being adjusted here is
now equivalent to what it was before d1bbbe45df.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We didn't add "{}" to all "if/else" branches, and one "error" was
mis-indented. Let's fix that first, which makes subsequent commits
smaller. In the case of the "if" we can simply early return instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
* dd/bisect-helper-subcommand:
bisect--helper: parse subcommand with OPT_SUBCOMMAND
bisect--helper: move all subcommands into their own functions
bisect--helper: remove unused options
As of it is, we're parsing subcommand with OPT_CMDMODE, which will
continue to parse more options even if the command has been found.
When we're running "git bisect run" with a command that expecting
a "--log" or "--no-log" arguments, or one of those "--bisect-..."
arguments, bisect--helper may mistakenly think those options are
bisect--helper's option.
We may fix those problems by passing "--" when calling from
git-bisect.sh, and skip that "--" in bisect--helper. However, it may
interfere with user's "--".
Let's parse subcommand with OPT_SUBCOMMAND since that API was born for
this specific use-case.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we will use OPT_SUBCOMMAND to parse sub-commands to
avoid consuming non-option opts.
Since OPT_SUBCOMMAND needs a function pointer to operate,
let's move it now.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
'git-bisect.sh' used to have a 'bisect_next_check' to check if we have
both good/bad, old/new terms set or not. In commit 129a6cf344
(bisect--helper: `bisect_next_check` shell function in C, 2019-01-02),
a subcommand for bisect--helper was introduced to port the check to C.
Since d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13), all users of 'bisect_next_check' was
re-implemented in C, this subcommand was no longer used but we forgot
to remove '--bisect-next-check'.
'git-bisect.sh' also used to have a 'bisect_write' function, whose
third positional parameter was a "nolog" flag. This flag was only used
when 'bisect_start' invoked 'bisect_write' to write the starting good
and bad revisions. Then 0f30233a11 (bisect--helper: `bisect_write`
shell function in C, 2019-01-02) ported it to C as a command mode of
'bisect--helper', which (incorrectly) added the '--no-log' option,
and convert the only place ('bisect_start') that call 'bisect_write'
with 'nolog' to 'git bisect--helper --bisect-write' with 'nolog'
instead of '--no-log', since 'bisect--helper' has command modes not
subcommands, all other command modes see and handle that option as well.
This bogus state didn't last long, however, because in the same patch
series 06f5608c14 (bisect--helper: `bisect_start` shell function
partially in C, 2019-01-02) the C reimplementation of bisect_start()
started calling the bisect_write() C function, this time with the
right 'nolog' function parameter. From then on there was no need for
the '--no-log' option in 'bisect--helper'. Eventually all bisect
subcommands were ported to C as 'bisect--helper' command modes, each
calling the bisect_write() C function instead, but when the
'--bisect-write' command mode was removed in 68efed8c8a
(bisect--helper: retire `--bisect-write` subcommand, 2021-02-03) it
forgot to remove that '--no-log' option.
'--no-log' option had never been used and it's unused now.
Let's remove --bisect-next-check and --no-log from option parsing.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When running 'read-tree' with a single tree and no prefix,
'prime_cache_tree()' is called after the tree is unpacked. In that
situation, skip a redundant call to 'cache_tree_update()' in
'unpack_trees()' by enabling the 'skip_cache_tree_update' unpack option.
Removing the redundant cache tree update provides a substantial performance
improvement to 'git read-tree <tree-ish>', as shown by a test added to
'p0006-read-tree-checkout.sh':
Test before after
----------------------------------------------------------------------
read-tree br_ballast_plus_1 3.94(1.80+1.57) 3.00(1.14+1.28) -23.9%
Note that the 'read-tree' in 't1022-read-tree-partial-clone.sh' is updated
to read two trees, rather than one. The test was first introduced in
d3da223f22 (cache-tree: prefetch in partial clone read-tree, 2021-07-23) to
exercise the 'cache_tree_update()' code path, as used in 'git merge'. Since
this patch drops the call to 'cache_tree_update()' in single-tree 'git
read-tree', change the test to use the two-tree variant so that
'cache_tree_update()' is called as intended.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Enable the 'skip_cache_tree_update' option in the variants that call
'prime_cache_tree()' after 'unpack_trees()' (specifically, 'git reset
--mixed' and 'git reset --hard'). This avoids redundantly rebuilding the
cache tree in both 'cache_tree_update()' at the end of 'unpack_trees()' and
in 'prime_cache_tree()', resulting in a small (but consistent) performance
improvement. From the newly-added 'p7102-reset.sh' test:
Test before after
--------------------------------------------------------------------
7102.1: reset --hard (...) 2.11(0.40+1.54) 1.97(0.38+1.47) -6.6%
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When deleting a branch, "git branch -d" has a safety check that ensures
the branch is merged to its upstream (if any), or to HEAD. To do that,
naturally we try to resolve HEAD to a commit object. If we're on an
orphan branch (i.e., HEAD points to a branch that does not yet exist),
that will fail, and we'll bail with an error:
$ git branch -d to-delete
fatal: Couldn't look up commit object for HEAD
This usually isn't that big of a deal. The deletion would fail anyway,
since the branch isn't merged to HEAD, and you'd need to use "-D" (or
"-f"). And doing so skips the HEAD resolution, courtesy of 67affd5173
(git-branch -D: make it work even when on a yet-to-be-born branch,
2006-11-24).
But there are still two problems:
1. The error message isn't very helpful. We should give the usual "not
fully merged" message, which points the user at "branch -D". That
was a problem even back in 67affd5173.
2. Even without a HEAD, these days it's still possible for the
deletion to succeed. After 67affd5173, commit 99c419c915 (branch
-d: base the "already-merged" safety on the branch it merges with,
2009-12-29) made it OK to delete a branch if it is merged to its
upstream.
We can fix both by removing the die() in delete_branches() completely,
leaving head_rev NULL in this case. It's tempting to stop there, as it
appears at first glance that the rest of the code does the right thing
with a NULL. But sadly, it's not quite true.
We end up feeding the NULL to repo_is_descendant_of(). In the
traditional code path there, we call repo_in_merge_bases_many(). It
feeds the NULL to repo_parse_commit(), which is smart enough to return
an error, and we immediately return "no, it's not a descendant".
But there's an alternate code path: if we have a commit graph with
generation numbers, we end up in can_all_from_reach(), which does
eventually try to set a flag on the NULL commit and segfaults.
So instead, we'll teach the local branch_merged() helper to treat a NULL
as "not merged". This would be a little more elegant in in_merge_bases()
itself, but that function is called in a lot of places, and it's not
clear that quietly returning "not merged" is the right thing everywhere
(I'd expect in many cases, feeding a NULL is a sign of a bug).
There are four tests here:
a. The first one confirms that deletion succeeds with an orphaned HEAD
when the branch is merged to its upstream. This is case (2) above.
b. Same, but with commit graphs enabled. Even if it is merged to
upstream, we still check head_rev so that we can say "deleting
because it's merged to upstream, even though it's not merged to
HEAD". Without the second hunk in branch_merged(), this test would
segfault in can_all_from_reach().
c. The third one confirms that we correctly say "not merged to HEAD"
when we can't resolve HEAD, and reject the deletion.
d. Same, but with commit graphs enabled. Without the first hunk in
branch_merged(), this one would segfault.
Reported-by: Martin von Zweigbergk <martinvonz@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Now that struct replay_opts has a reflog_action member we no longer
need to export GIT_REFLOG_ACTION when starting a rebase. If the user
has set GIT_REFLOG_ACTION then we use it when initializing
reflog_action.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Simplify the run-command API.
* rs/no-more-run-command-v:
replace and remove run_command_v_opt()
replace and remove run_command_v_opt_cd_env_tr2()
replace and remove run_command_v_opt_tr2()
replace and remove run_command_v_opt_cd_env()
use child_process members "args" and "env" directly
use child_process member "args" instead of string array variable
sequencer: simplify building argument list in do_exec()
bisect--helper: factor out do_bisect_run()
bisect: simplify building "checkout" argument list
am: simplify building "show" argument list
run-command: fix return value comment
merge: remove always-the-same "verbose" arguments
Enable gc.cruftpacks by default for those who opt into
feature.experimental setting.
* es/mark-gc-cruft-as-experimental:
config: let feature.experimental imply gc.cruftPacks=true
gc: add tests for --cruft and friends
Have the cmd_submodule__helper() use the OPT_SUBCOMMAND() API
introduced in fa83cc834d (parse-options: add support for parsing
subcommands, 2022-08-19).
This is only a marginal reduction in line count, but once we start
unifying this with a yet-to-be-added "builtin/submodule.c" it'll be
much easier to reason about those changes, as they'll both use
OPT_SUBCOMMAND().
We don't need to worry about "argv[0]" being NULL in the die() because
we'd have errored out in parse_options() as we're not using
"PARSE_OPT_SUBCOMMAND_OPTIONAL".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Since 29a5e9e1ff (submodule--helper update-clone: learn --init,
2022-03-04) we've been passing "-C <prefix>" from "git-submodule.sh"
whenever we pass "--prefix <prefix>", so the latter is redundant to
the former. Let's drop the "--prefix" option.
Suggested-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Let's pass the "-C <prefix>" option instead to "absorbgitdirs" from
its only caller.
When it was added in f6f8586140 (submodule: add absorb-git-dir
function, 2016-12-12) there were other "submodule--helper" subcommands
that were invoked with "-C <prefix>", so we could have done this all
along.
Suggested-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Remove the "----recursive" option to "git submodule--helper
absorbgitdirs" (yes, with 4 dashes, not 2).
This option and all the "else" when "flags &
ABSORB_GITDIR_RECURSE_SUBMODULES" is false has never been used since
it was added in f6f8586140 (submodule: add absorb-git-dir function,
2016-12-12), which we'd have had to do as "----recursive", a
"--recursive" would have errored out.
It would be nice to follow-up with an optbug() assertion to
parse-options.c for such funnily named options, I manually validated
that this was the only long option whose name started with "-", but
let's skip adding such an assertion for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The "status" sub-command was leaking the "struct strvec" it was
setting up for the reasons explained in f92dbdbc6a (revisions API:
don't leak memory on argv elements that need free()-ing, 2022-08-02),
so let's use the "free_removed_argv_elements" option to
setup_revisions() to fix the leak.
Even if we did that, clobbering the "diff_files_args.nr" with the
return value of setup_revisions() would leave leaks in place, but we
can just stop clobbering it.
Ever since that code was added in a9f8a37584 (submodule: port
submodule subcommand 'status' from shell to C, 2017-10-06) we've had
no reason to modify the "nr" member ("argc" at the time): The next use
of "diff_files_args" after this is the "strvec_clear()" at the end of
the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
As with other moves to "test-tool" in f322e9f51b (Merge branch
'ab/submodule-helper-prep', 2022-09-13) the "config" sub-command was
only used by our own tests.
It was last used by "git submodule" itself in code that went away with
a6226fd772 (submodule--helper: convert the bulk of cmd_add() to C,
2021-08-10).
Let's move it over, and while doing so make it easier to reason about
by splitting up the various uses for it into separate sub-commands, so
that we don't need to count arguments to see what it does.
This also has the advantage that we stop wasting future translator
time on this command, currently the usage information for this
internal-only tool has been translated into several languages. The use
of the "_" function has also been removed from the "please make
sure..." message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git merge-tree --stdin" is a new way to request a series of merges
and report the merge results.
* en/merge-tree-sequence:
merge-tree: support multiple batched merges with --stdin
merge-tree: update documentation for differences in -z output
Define the logical elements of a "bundle list", data structure to
store them in-core, format to transfer them, and code to parse
them.
* ds/bundle-uri-3:
bundle-uri: suppress stderr from remote-https
bundle-uri: quiet failed unbundlings
bundle: add flags to verify_bundle()
bundle-uri: fetch a list of bundles
bundle: properly clear all revision flags
bundle-uri: limit recursion depth for bundle lists
bundle-uri: parse bundle list in config format
bundle-uri: unit test "key=value" parsing
bundle-uri: create "key=value" line parsing
bundle-uri: create base key-value pair parsing
bundle-uri: create bundle_list struct and helpers
bundle-uri: use plain string in find_temp_filename()
"git branch --edit-description" can exit with status -1 which is
not a good practice; it learned to use 1 as everybody else instead.
* rj/branch-do-not-exit-with-minus-one-status:
branch: error code with --edit-description
