When we load a revindex from disk, we check the size of the file
compared to the number of objects we expect it to have. But when we use
a RIDX chunk stored directly in the midx, we just access the memory
directly. This can lead to out-of-bounds memory access for a corrupted
or malicious multi-pack-index file.
We can catch this by recording the RIDX chunk size, and then checking it
against the expected size when we "load" the revindex. Note that this
check is much simpler than the one that load_revindex_from_disk() does,
because we just have the data array with no header (so we do not need
to account for the header size, and nor do we need to bother validating
the header values).
The test confirms both that we catch this case, and that we continue the
process (the revindex is required to use the midx bitmaps, but we
fallback to a non-bitmap traversal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a large offset bit in the regular midx offset table, we
use the entry as an index into a separate large offset table (just like
a pack idx does). But we don't bounds-check the access to that large
offset table (nor even record its size when we parse the chunk!).
The equivalent code for a regular pack idx is in check_pack_index_ptr().
But things are a bit simpler here because of the chunked format: we can
just check our array index directly.
As a bonus, we can get rid of the st_mult() here. If our array
bounds-check is successful, then we know that the result will fit in a
size_t (and the bounds check uses a division to avoid overflow
entirely).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object offset chunk has one fixed-size entry for each object in the
midx. But since we don't check its size, we may access out-of-bounds
memory if we see a corrupt or malicious midx file.
Sine the entries are fixed-size, the total length can be known up-front,
and we can just check it while parsing the chunk (this is similar to
what we do when opening pack idx files, which contain a similar offset
table).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The midx reader assumes chunks are aligned to a 4-byte boundary: we
treat the fanout chunk as an array of uint32_t, indexing it to feed the
results to ntohl(). Without aligning the chunks, we may violate the
CPU's alignment constraints. Though many platforms allow this, some do
not. And certanily UBSan will complain, since it is undefined behavior.
Even though most chunks are naturally 4-byte-aligned (because they are
storing uint32_t or larger types), PNAM is not. It stores NUL-terminated
pack names, so you can have a valid chunk with any length. The writing
side handles this by 4-byte-aligning the chunk, introducing a few extra
NULs as necessary. But since we don't check this on the reading side, we
may end up with a misaligned fanout and trigger the undefined behavior.
We have two options here:
1. Swap out ntohl(fanout[i]) for get_be32(fanout+i) everywhere. The
latter handles alignment itself. It's possible that it's slightly
slower (though in practice I'm not sure how true that is,
especially for these code paths which then go on to do a binary
search).
2. Enforce the alignment when reading the chunks. This is easy to do,
since the table-of-contents reader can check it in one spot.
I went with the second option here, just because it places less burden
on maintenance going forward (it is OK to continue using ntohl), and we
know it can't have any performance impact on the actual reads.
The commit-graph code uses the same chunk API. It's usually also 4-byte
aligned, but some chunks are not (like Bloom filter BDAT chunks). So
we'll pass "1" here to allow any alignment. It doesn't suffer from the
same problem as midx with its fanout because the fanout chunk is always
the first (and the rest of the format dictates that the first chunk will
start aligned).
The new test shows the effect on a midx with a misaligned PNAM chunk.
Note that the midx-reading code treats chunk-toc errors as soft, falling
back to the non-midx path rather than calling die(), as we do for other
parsing errors. Arguably we should make all of these behave the same,
but that's out of scope for this patch. For now the test just expects
the fallback behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse the pack-name chunk as a series of NUL-terminated strings. But
since we don't look at the chunk size, there's nothing to guarantee that
we don't parse off the end of the chunk (or even off the end of the
mapped file).
We can record the length, and then as we parse make sure that we never
walk past it.
The new test exercises the case, though note that it does not actually
segfault before this patch. It hits a NUL byte somewhere in one of the
other chunks, and comes up with a garbage pack name. You could construct
one that reads out-of-bounds (e.g., a PNAM chunk at the end of file),
but this case is simple and sufficient to check that we detect the
problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading an on-disk multi-pack-index, we take the number of objects
in the midx from the final value of the fanout table. But we just
blindly assume that the chunk containing the actual oid entries is the
correct size. This can lead to us reading out-of-bounds memory if the
lookup chunk is too small (or if the fanout is corrupted; when they
don't agree we cannot tell which one is wrong).
Note that we bump the assignment of m->num_objects into the fanout
parser callback, so that it's set when we parse the lookup table
(otherwise we'd have to manually record the lookup table size and check
it later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we load the oid-fanout chunk, our callback checks that its size is
reasonable and returns an error if not. However, the caller only checks
our return value against CHUNK_NOT_FOUND, so we end up ignoring the
error completely! Using a too-small fanout table means we end up
accessing random memory for the fanout and segfault.
We can fix this by checking for any non-zero return value, rather than
just CHUNK_NOT_FOUND, and adjusting our error message to cover both
cases. We could handle each error code individually, but there's not
much point for such a rare case. The extra message produced in the
callback makes it clear what is going on.
The same pattern is used in the adjacent code. Those cases are actually
OK for now because they do not use a custom callback, so the only error
they can get is CHUNK_NOT_FOUND. But let's convert them, as this is an
accident waiting to happen (especially as we convert some of them away
from pair_chunk). The error messages are more verbose, but it should be
rare for a user to see these anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pair_chunk() function is provided as an easy helper for parsing
chunks that just want a pointer to a set of bytes. But every caller has
a hidden bug: because we return only the pointer without the matching
chunk size, the callers have no clue how many bytes they are allowed to
look at. And as a result, they may read off the end of the mmap'd data
when the on-disk file does not match their expectations.
Since chunk files are typically used for local-repository data like
commit-graph files and midx's, the security implications here are pretty
mild. The worst that can happen is that you hand somebody a corrupted
repository tarball, and running Git on it does an out-of-bounds read and
crashes. So it's worth being more defensive, but we don't need to drop
everything and fix every caller immediately.
I noticed the problem because the pair_chunk_fn() callback does not look
at its chunk_size argument, and wanted to annotate it to silence
-Wunused-parameter. We could do that now, but we'd lose the hint that
this code should be audited and fixed.
So instead, let's set ourselves up for going down that path:
1. Provide a pair_chunk() function that does return the size, which
prepares us for fixing these cases.
2. Rename the existing function to pair_chunk_unsafe(). That gives us
an easy way to grep for cases which still need to be fixed, and the
name should cause anybody adding new calls to think twice before
using it.
There are no callers of the "safe" version yet, but we'll add some in
subsequent patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various offset computation in the code that accesses the packfiles
and other data in the object layer has been hardened against
arithmetic overflow, especially on 32-bit systems.
* tb/object-access-overflow-protection:
commit-graph.c: prevent overflow in `verify_commit_graph()`
commit-graph.c: prevent overflow in `write_commit_graph()`
commit-graph.c: prevent overflow in `merge_commit_graph()`
commit-graph.c: prevent overflow in `split_graph_merge_strategy()`
commit-graph.c: prevent overflow in `load_tree_for_commit()`
commit-graph.c: prevent overflow in `fill_commit_in_graph()`
commit-graph.c: prevent overflow in `fill_commit_graph_info()`
commit-graph.c: prevent overflow in `load_oid_from_graph()`
commit-graph.c: prevent overflow in add_graph_to_chain()
commit-graph.c: prevent overflow in `write_commit_graph_file()`
pack-bitmap.c: ensure that eindex lookups don't overflow
midx.c: prevent overflow in `fill_included_packs_batch()`
midx.c: prevent overflow in `write_midx_internal()`
midx.c: store `nr`, `alloc` variables as `size_t`'s
midx.c: prevent overflow in `nth_midxed_offset()`
midx.c: prevent overflow in `nth_midxed_object_oid()`
midx.c: use `size_t`'s for fanout nr and alloc
packfile.c: use checked arithmetic in `nth_packed_object_offset()`
packfile.c: prevent overflow in `load_idx()`
packfile.c: prevent overflow in `nth_packed_object_id()`
In a similar spirit as in previous commits, avoid an integer overflow
when computing the expected size of a MIDX.
(Note that this is also OK as-is, since `p->pack_size` is an `off_t`, so
this computation should already be done as 64-bit integers. But again,
let's use `st_mult()` to make this fact clear).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a MIDX, we use the chunk-format API to write out each
individual chunk of the MIDX. Each chunk of the MIDX is tracked via a
call to `add_chunk()`, along with the expected size of that chunk.
Guard against overflow when dealing with a MIDX with a large number of
entries (and consequently, large chunks within the MIDX file itself) to
avoid corrupting the contents of the MIDX itself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the `write_midx_context` structure, we use two `uint32_t`'s to track
the length and allocated size of the packs, and one `uint32_t` to track
the number of objects in the MIDX.
In practice, having these be 32-bit unsigned values shouldn't cause any
problems since we are unlikely to have that many objects or packs in any
real-world repository. But these values should be `size_t`'s, so change
their type to reflect that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous patches, avoid an overflow when looking
up object offsets in the MIDX's large offset table by guarding the
computation via `st_mult()`.
This instance is also OK as-is, since the left operand is the result of
`sizeof(...)`, which is already a `size_t`. But use `st_mult()` instead
here to make it explicit that this computation is to be performed using
64-bit unsigned integers.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, avoid overflow when looking up
an object's OID in a MIDX when its position is greater than
`2^32-1/m->hash_len`.
As usual, it is perfectly OK for a MIDX to have as many as 2^32-1
objects (since we use 32-bit fields to count the number of objects at
each fanout layer). But if we have more than `2^32-1/m->hash_len` number
of objects, we will incorrectly perform the computation using 32-bit
integers, overflowing the result.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `midx_fanout` struct is used to keep track of a set of OIDs
corresponding to each layer of the MIDX's fanout table. It stores an
array of entries, along with the number of entries in the table, and the
allocated size of the array.
Both `nr` and `alloc` are stored as 32-bit unsigned integers. In
practice, this should never cause any problems, since most packs have
far fewer than 2^32-1 objects.
But storing these as `size_t`'s is more appropriate, and prevents us
from accidentally overflowing some result when multiplying or adding to
either of these values. Update these struct members to be `size_t`'s as
appropriate.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
Geometric repacking ("git repack --geometric=<n>") in a repository
that borrows from an alternate object database had various corner
case bugs, which have been corrected.
* ps/fix-geom-repack-with-alternates:
repack: disable writing bitmaps when doing a local repack
repack: honor `-l` when calculating pack geometry
t/helper: allow chmtime to print verbosely without modifying mtime
pack-objects: extend test coverage of `--stdin-packs` with alternates
pack-objects: fix error when same packfile is included and excluded
pack-objects: fix error when packing same pack twice
pack-objects: split out `--stdin-packs` tests into separate file
repack: fix generating multi-pack-index with only non-local packs
repack: fix trying to use preferred pack in alternates
midx: fix segfault with no packs and invalid preferred pack
When asked to write a multi-pack-index the user can specify a preferred
pack that is used as a tie breaker when multiple packs contain the same
objects. When this packfile cannot be found, we just pick the first pack
that is getting tracked by the newly written multi-pack-index as a
fallback.
Picking the fallback can fail in the case where we're asked to write a
multi-pack-index with no packfiles at all: picking the fallback value
will cause a segfault as we blindly index into the array of packfiles,
which would be empty.
Fix this bug by resetting the preferred packfile index to `-1` before
searching for the preferred pack. This fixes the segfault as we already
check for whether the index is `> - 1`. If it is not, we simply don't
pick a preferred packfile at all.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the change in the last commit to move several functions to
write-or-die.h, csum-file.h no longer needs to include cache.h.
However, removing that include forces several other C files, which
directly or indirectly dependend upon csum-file.h's inclusion of
cache.h, to now be more explicit about their dependencies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bugfix with tracing support in midx codepath
* tb/midx-bitmap-selection-fix:
pack-bitmap-write.c: instrument number of reused bitmaps
midx.c: instrument MIDX and bitmap generation with trace2 regions
midx.c: consider annotated tags during bitmap selection
midx.c: fix whitespace typo
When debugging MIDX and MIDX-bitmap related issues, it is useful to
figure out where Git is spending its time.
GitHub has been using the below trace2 regions to instrument various
components of generating a MIDX itself, as well time spent preparing to
build a MIDX bitmap.
These are limited to instrumenting the following functions:
- midx.c::find_commits_for_midx_bitmap()
- midx.c::midx_pack_order()
- midx.c::prepare_midx_packing_data()
- midx.c::write_midx_bitmap()
- midx.c::write_midx_internal()
- midx.c::write_midx_reverse_index()
to start and end with a trace2_region_enter() and trace2_region_leave(),
respectively.
The category for all of these is "midx", which matches the existing
convention. The region description matches the name of the function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a multi-pack bitmap without a `--refs-snapshot` (e.g.,
by running `git multi-pack-index write --bitmap` directly), we determine
the set of bitmap-able commits by enumerating each reference, and adding
the referrent as the tip of a reachability traversal when it appears
somewhere in the MIDX. (Any commit we encounter during the reachability
traversal then becomes a candidate for bitmap selection).
But we incorrectly avoid peeling the object at the tip of each
reference. So if we see some reference that points at an annotated tag
(which in turn points through zero or more additional annotated tags at
a commit), that we will not add it as a tip for the reachability
traversal. This means that if some commit C is only referenced through
one or more annotated tag(s), then C won't become a bitmap candidate.
Correct this by peeling the reference tips as we enumerate them to
ensure that we consider commits which are the targets of annotated tags,
in addition to commits which are referenced directly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was unintentionally introduced via 893b563505 (midx: inline
nth_midxed_pack_entry(), 2021-09-11) where "struct repository *r"
became "struct repository * r".
The latter does not adhere to our usual style conventions, so fix that
up to look more like our usual declarations.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment with respect to cruft packs as in a few commits
ago to `repack` with a non-zero `--batch-size`.
Since the case of a non-zero `--batch-size` is handled separately (in
`fill_included_packs_batch()` instead of `fill_included_packs_all()`), a
separate fix must be applied for this case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fill_included_packs_batch() routine is responsible for aggregating
objects in packs with a non-zero value for the `--batch-size` option of
the `git multi-pack-index repack` sub-command.
Since this routine is explicitly called only when `--batch-size` is
non-zero, there is no point in checking that this is the case in our
loop condition.
Remove the unnecessary part of this condition to avoid confusion.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a direct invocation of Git's `xcalloc()` wrapper with the
`CALLOC_ARRAY()` macro instead.
The latter is preferred since it is more conventional in Git's codebase,
but also because it automatically picks the correct value for the record
size.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `repack` sub-command of the `git multi-pack-index` builtin creates a
new pack aggregating smaller packs contained in the MIDX up to some
given `--batch-size`.
When `--batch-size=0`, this instructs the MIDX builtin to repack
everything contained in the MIDX into a single pack.
In similar spirit as a previous commit, it is undesirable to repack the
contents of a cruft pack in this step. Teach `repack` to ignore any
cruft pack(s) when `--batch-size=0` for the same reason(s).
(The case of a non-zero `--batch-size` will be handled in a subsequent
commit).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `expire` sub-command unlinks any packs that are (a) contained in the
MIDX, but (b) have no objects referenced by the MIDX.
This sub-command ignores `.keep` packs, which remain on-disk even if
they have no objects referenced by the MIDX. Cruft packs, however,
aren't given the same treatment: if none of the objects contained in the
cruft pack are selected from the cruft pack by the MIDX, then the cruft
pack is eligible to be expired.
This is less than desireable, since the cruft pack has important
metadata about the individual object mtimes, which is useful to
determine how quickly an object should age out of the repository when
pruning.
Ordinarily, we wouldn't expect the contents of a cruft pack to
duplicated across non-cruft packs (and we'd expect to see the MIDX
select all cruft objects from other sources even less often). But
nonetheless, it is still possible to trick the `expire` sub-command into
removing the `.mtimes` file in this circumstance.
Teach the `expire` sub-command to ignore cruft packs in the same manner
as it does `.keep` packs, in order to keep their metadata around, even
when they are unreferenced by the MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack bitmap file gained a bitmap-lookup table to speed up
locating the necessary bitmap for a given commit.
* ac/bitmap-lookup-table:
pack-bitmap-write: drop unused pack_idx_entry parameters
bitmap-lookup-table: add performance tests for lookup table
pack-bitmap: prepare to read lookup table extension
pack-bitmap-write: learn pack.writeBitmapLookupTable and add tests
pack-bitmap-write.c: write lookup table extension
bitmap: move `get commit positions` code to `bitmap_writer_finish`
Documentation/technical: describe bitmap lookup table extension
Multi-pack index got corrupted when preferred pack changed from one
pack to another in a certain way, which has been corrected.
* tb/midx-with-changing-preferred-pack-fix:
midx.c: avoid adding preferred objects twice
midx.c: include preferred pack correctly with existing MIDX
midx.c: extract `midx_fanout_add_pack_fanout()`
midx.c: extract `midx_fanout_add_midx_fanout()`
midx.c: extract `struct midx_fanout`
t/lib-bitmap.sh: avoid silencing stderr
t5326: demonstrate potential bitmap corruption
Teach Git to provide a way for users to enable/disable bitmap lookup
table extension by providing a config option named 'writeBitmapLookupTable'.
Default is false.
Also add test to verify writting of lookup table.
Mentored-by: Taylor Blau <me@ttaylorr.com>
Co-Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Co-Authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last commit changes the behavior of midx.c's `get_sorted_objects()`
function to handle the case of writing a MIDX bitmap while reusing an
existing MIDX and changing the identity of the preferred pack
separately.
As part of this change, all objects from the (new) preferred pack are
added to the fanout table in a separate pass. Since these copies of the
objects all have their preferred bits set, any duplicates will be
resolved in their favor.
Importantly, this includes any copies of those same objects that come
from the existing MIDX. We know at the time of adding them that they'll
be redundant if their source pack is the (new) preferred one, so we can
avoid adding them to the list in this case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch resolves an issue where the object order used to generate a
MIDX bitmap would violate an invariant that all of the preferred pack's
objects are represented by that pack in the MIDX.
The problem arises when reusing an existing MIDX while generating a new
one, and occurs specifically when the identity of the preferred pack
changes from one MIDX to another, along with a few other conditions:
- the new preferred pack must also be present in the existing MIDX
- the new preferred pack must *not* have been the preferred pack in
the existing MIDX
- most importantly, there must be at least one object present in the
physical preferred pack (ie., it shows up in that pack's index)
but was selected from a *different* pack when the previous MIDX
was generated
When the above conditions are all met, we end up (incorrectly)
discarding copies of some objects in the pack selected as the preferred
pack. This is because `get_sorted_entries()` adds objects to its list
by doing the following at each fanout level:
- first, adding all objects from that fanout level from an existing
MIDX
- then, adding all objects from that fanout level in each pack *not*
included in the existing MIDX
So if some object was not selected from the to-be-preferred pack when
writing the previous MIDX, then we will never consider it as a candidate
when generating the new MIDX. This means that it's possible for the
preferred pack to not include all of its objects in the MIDX's
pseudo-pack object order, which is an invariant violation of that order.
Resolve this by adding all objects from the preferred pack separately
when it appears in the existing MIDX (if one was present). This will
duplicate objects from that pack that *did* appear in the MIDX, but this
is fine, since get_sorted_entries() already handles duplicates. (A
future optimization in this area could avoid adding copies of objects
that we know already existing in the MIDX.)
Note that we no longer need to compute the preferred-ness of objects
added from the MIDX, since we only want to select the preferred objects
from a single source. (We could still mark these preferred bits, but
doing so is redundant and unnecessary).
This resolves the bug demonstrated by t5326.174 ("preferred pack change
with existing MIDX bitmap").
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a routine to add all objects whose object ID's first byte is
`cur_fanout` from a given pack (identified by its index into the `struct
pack_info` array maintained by the MIDX writing routine).
Unlike the previous extraction (for `midx_fanout_add_midx_fanout()`),
this function will be called twice, once for all new packs, and again
for the preferred pack (if it appears in an existing MIDX). The latter
change is to resolve the bug described a few patches ago, and will be
made in the subsequent commit.
Similar to the previous refactoring, this function also enhances the
readability of its caller in `get_sorted_entries()`.
Its functionality is unchanged in this commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a routine to add all objects whose object ID's first byte is
`cur_fanout` from an existing MIDX.
This function will only be called once, so extracting it is purely
cosmetic to improve the readability of `get_sorted_entries()` (its sole
caller) below.
The functionality is unchanged in this commit.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To build up a list of objects (along with their packs, and the offsets
within those packs that each object appears at), the MIDX code
implements `get_sorted_entries()` which builds up a list of candidates,
sorts them, and then removes duplicate entries.
To do this, it keeps an array of `pack_midx_entry` structures that it
builds up once for each fanout level (ie., for all possible values of
the first byte of each object's ID).
This array is a function-local variable of `get_sorted_entries()`. Since
it uses the ALLOC_GROW() macro, having the `alloc_fanout` variable also
be local to that function, and only modified within that function is
convenient.
However, subsequent changes will extract the two ways this array is
filled (from a pack at some fanout value, and from an existing MIDX at
some fanout value) into separate functions. Instead of passing around
pointers to the entries array, along with `nr_fanout` and
`alloc_fanout`, encapsulate these three into a structure instead. Then
pass around a pointer to this structure instead.
This patch does not yet extract the above two functions, but sets us up
to begin doing so in the following commit. For now, the implementation
of get_sorted_entries() is only modified to replace `entries_by_fanout`
with `fanout.entries`, `nr_fanout` with `fanout.nr`, and so on.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refactoring in 90b2bb710d (midx: extract bitmap write setup,
2022-07-19) hoisted our call to find_commits_for_midx_bitmap() into the
caller, which means we no longer need to see the refs_snapshot at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_midx_bitmap() method is a long method that does a lot of
steps. It requires the write_midx_context struct for use in
prepare_midx_packing_data() and find_commits_for_midx_bitmap(), but
after that only needs the pack_order array.
This is a messy, but completely non-functional refactoring. The code is
only being moved around to reduce visibility of the write_midx_context
during the longest part of computing reachability bitmaps.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
