"git for-each-ref" and friends learn to apply mailmap to authorname
and other fields.
* ks/ref-filter-mailmap:
ref-filter: add mailmap support
t/t6300: introduce test_bad_atom
t/t6300: cleanup test_atom
"git rev-list --stdin" learned to take non-revisions (like "--not")
recently from the standard input, but the way such a "--not" was
handled was quite confusing, which has been rethought. This is
potentially a change that breaks backward compatibility.
* ps/revision-cmdline-stdin-not:
revision: make pseudo-opt flags read via stdin behave consistently
The list of additional XY values for submodules in short format
isn't formatted consistently with the rest of the document.
Format as list for consistency.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit implemented the `gc.repackFilter` config option
to specify a filter that should be used by `git gc` when
performing repacks.
Another previous commit has implemented
`git repack --filter-to=<dir>` to specify the location of the
packfile containing filtered out objects when using a filter.
Let's implement the `gc.repackFilterTo` config option to specify
that location in the config when `gc.repackFilter` is used.
Now when `git gc` will perform a repack with a <dir> configured
through this option and not empty, the repack process will be
passed a corresponding `--filter-to=<dir>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
It would be nice if this new different pack could be created in a
different directory than the regular pack. This would make it possible
to move large blobs into a pack on a different kind of storage, for
example cheaper storage.
Even in a different directory, this pack can be accessible if, for
example, the Git alternates mechanism is used to point to it. In fact
not using the Git alternates mechanism can corrupt a repo as the
generated pack containing the filtered objects might not be accessible
from the repo any more. So setting up the Git alternates mechanism
should be done before using this feature if the user wants the repo to
be fully usable while this feature is used.
In some cases, like when a repo has just been cloned or when there is no
other activity in the repo, it's Ok to setup the Git alternates
mechanism afterwards though. It's also Ok to just inspect the generated
packfile containing the filtered objects and then just move it into the
'.git/objects/pack/' directory manually. That's why it's not necessary
for this command to check that the Git alternates mechanism has been
already setup.
While at it, as an example to show that `--filter` and `--filter-to`
work well with other options, let's also add a test to check that these
options work well with `--max-pack-size`.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
Users might want to perform such a cleanup regularly at the same time as
they perform other repacks and cleanups, so as part of `git gc`.
Let's allow them to configure a <filter-spec> for that purpose using a
new gc.repackFilter config option.
Now when `git gc` will perform a repack with a <filter-spec> configured
through this option and not empty, the repack process will be passed a
corresponding `--filter=<filter-spec>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option puts the objects specified by `<filter-spec>` into a
separate packfile.
This could be useful if, for example, some blobs take up a lot of
precious space on fast storage while they are rarely accessed. It could
make sense to move them into a separate cheaper, though slower, storage.
It's possible to find which new packfile contains the filtered out
objects using one of the following:
- `git verify-pack -v ...`,
- `test-tool find-pack ...`, which a previous commit added,
- `--filter-to=<dir>`, which a following commit will add to specify
where the pack containing the filtered out objects will be.
This feature is implemented by running `git pack-objects` twice in a
row. The first command is run with `--filter=<filter-spec>`, using the
specified filter. It packs objects while omitting the objects specified
by the filter. Then another `git pack-objects` command is launched using
`--stdin-packs`. We pass it all the previously existing packs into its
stdin, so that it will pack all the objects in the previously existing
packs. But we also pass into its stdin, the pack created by the previous
`git pack-objects --filter=<filter-spec>` command as well as the kept
packs, all prefixed with '^', so that the objects in these packs will be
omitted from the resulting pack. The result is that only the objects
filtered out by the first `git pack-objects` command are in the pack
resulting from the second `git pack-objects` command.
As the interactions with kept packs are a bit tricky, a few related
tests are added.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9535ce7337 (pack-objects: add list-objects filtering, 2017-11-21)
taught `git pack-objects` to use `--filter`, but required the use of
`--stdout` since a partial clone mechanism was not yet in place to
handle missing objects. Since then, changes like 9e27beaa23
(promisor-remote: implement promisor_remote_get_direct(), 2019-06-25)
and others added support to dynamically fetch objects that were missing.
Even without a promisor remote, filtering out objects can also be useful
if we can put the filtered out objects in a separate pack, and in this
case it also makes sense for pack-objects to write the packfile directly
to an actual file rather than on stdout.
Remove the `--stdout` requirement when using `--filter`, so that in a
follow-up commit, repack can pass `--filter` to pack-objects to omit
certain objects from the resulting packfile.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"checkout --merge -- path" and "update-index --unresolve path" did
not resurrect conflicted state that was resolved to remove path,
but now they do.
* jc/unresolve-removal:
checkout: allow "checkout -m path" to unmerge removed paths
checkout/restore: add basic tests for --merge
checkout/restore: refuse unmerging paths unless checking out of the index
update-index: remove stale fallback code for "--unresolve"
update-index: use unmerge_index_entry() to support removal
resolve-undo: allow resurrecting conflicted state that resolved to deletion
update-index: do not read HEAD and MERGE_HEAD unconditionally
"git range-diff --notes=foo" compared "log --notes=foo --notes" of
the two ranges, instead of using just the specified notes tree.
* kh/range-diff-notes:
range-diff: treat notes like `log`
"git diff" learned diff.statNameWidth configuration variable, to
give the default width for the name part in the "--stat" output.
* ds/stat-name-width-configuration:
diff --stat: add config option to limit filename width
The soft limit of the first line of the commit message should be
"no more than 50 characters" or "50 characters or less", but not
"less than 50 character".
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mailmap support to ref-filter formats which are similar in
pretty. This support is such that the following pretty placeholders are
equivalent to the new ref-filter atoms:
%aN = authorname:mailmap
%cN = committername:mailmap
%aE = authoremail:mailmap
%aL = authoremail:mailmap,localpart
%cE = committeremail:mailmap
%cL = committeremail:mailmap,localpart
Additionally, mailmap can also be used with ":trim" option for email by
doing something like "authoremail:mailmap,trim".
The above also applies for the "tagger" atom, that is,
"taggername:mailmap", "taggeremail:mailmap", "taggeremail:mailmap,trim"
and "taggername:mailmap,localpart".
The functionality of ":trim" and ":localpart" remains the same. That is,
":trim" gives the email, but without the angle brackets and ":localpart"
gives the part of the email before the '@' character (if such a
character is not found then we directly grab everything between the
angle brackets).
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading revisions from stdin via git-rev-list(1)'s `--stdin` option
then these revisions never honor flags like `--not` which have been
passed on the command line. Thus, an invocation like e.g. `git rev-list
--all --not --stdin` will not treat all revisions read from stdin as
uninteresting. While this behaviour may be surprising to a user, it's
been this way ever since it has been introduced via 42cabc341c (Teach
rev-list an option to read revs from the standard input., 2006-09-05).
With that said, in c40f0b7877 (revision: handle pseudo-opts in `--stdin`
mode, 2023-06-15) we have introduced a new mode to read pseudo opts from
standard input where this behaviour is a lot more confusing. If you pass
`--not` via stdin, it will:
- Influence subsequent revisions or pseudo-options passed on the
command line.
- Influence pseudo-options passed via standard input.
- _Not_ influence normal revisions passed via standard input.
This behaviour is extremely inconsistent and bound to cause confusion.
While it would be nice to retroactively change the behaviour for how
`--not` and `--stdin` behave together, chances are quite high that this
would break existing scripts that expect the current behaviour that has
been around for many years by now. This is thus not really a viable
option to explore to fix the inconsistency.
Instead, we change the behaviour of how pseudo-opts read via standard
input influence the flags such that the effect is fully localized. With
this change, when reading `--not` via standard input, it will:
- _Not_ influence subsequent revisions or pseudo-options passed on
the command line, which is a change in behaviour.
- Influence pseudo-options passed via standard input.
- Influence normal revisions passed via standard input, which is a
change in behaviour.
Thus, all flags read via standard input are fully self-contained to that
standard input, only.
While this is a breaking change as well, the behaviour has only been
recently introduced with Git v2.42.0. Furthermore, the current behaviour
can be regarded as a simple bug. With that in mind it feels like the
right thing to retroactively change it and make the behaviour sane.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reported-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index" learns "--show-index-version" to inspect
the index format version used by the on-disk index file.
* jc/update-index-show-index-version:
test-tool: retire "index-version"
update-index: add --show-index-version
update-index doc: v4 is OK with JGit and libgit2
While git show accepts options that apply to the git diff-tree command,
some options do not make sense in the context of git show.
The options of git show are handled using the machinery of git log.
The git log manual page is a better place to look into than git diff-tree
for options that are not in the git show manual page.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, `range-diff` shows the default notes if no notes-related
arguments are given. This is also how `log` behaves. But unlike
`range-diff`, `log` does *not* show the default notes if
`--notes=<custom>` are given. In other words, this:
git log --notes=custom
is equivalent to this:
git log --no-notes --notes=custom
While:
git range-diff --notes=custom
acts like this:
git log --notes --notes-custom
This can’t be how the user expects `range-diff` to behave given that the
man page for `range-diff` under `--[no-]notes[=<ref>]` says:
> This flag is passed to the `git log` program (see git-log(1)) that
> generates the patches.
This behavior also affects `format-patch` since it uses `range-diff` for
the cover letter. Unlike `log`, though, `format-patch` is not supposed
to show the default notes if no notes-related arguments are given.[1]
But this promise is broken when the range-diff happens to have something
to say about the changes to the default notes, since that will be shown
in the cover letter.
Remedy this by introducing `--show-notes-by-default` that `range-diff` can
use to tell the `log` subprocess what to do.
§ Authors
• Fix by Johannes
• Tests by Kristoffer
† 1: See e.g. 66b2ed09c2 (Fix "log" family not to be too agressive about
showing notes, 2010-01-20).
Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--type=<type>` was added as a prefered alias for `--<type>` by
fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`), the explanation for the path type was
reworded. Whereas the previous explanation said "expand a leading
`~`" this was changed to "adding a leading `~`". Change "adding" to
"expanding" to correctly explain the canonicalization.
Signed-off-by: Evan Gates <evan.gates@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References from description of the `--patch` option in various
manual pages have been simplified and improved.
* so/diff-doc-for-patch-update:
doc/diff-options: fix link to generating patch section
The default log message created by "git revert", when reverting a
commit that records a revert, has been tweaked.
* ob/revert-of-revert-is-reapply:
git-revert.txt: add discussion
sequencer: beautify subject of reverts of reverts
"git log --format" has been taught the %(decorate) placeholder.
* ak/pretty-decorate-more:
decorate: use commit color for HEAD arrow
pretty: add pointer and tag options to %(decorate)
pretty: add %(decorate[:<options>]) format
decorate: color each token separately
decorate: avoid some unnecessary color overhead
decorate: refactor format_decorations()
pretty-formats: enclose options in angle brackets
pretty-formats: define "literal formatting code"
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
"git update-index --index-version N" is used to set the index format
version to a specific version, but there was no way to query the
current version used in the on-disk index file.
Teach the command a new "--show-index-version" option, and also
teach the "--index-version N" option to report what the version was
when run with the "--verbose" option.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being invented in late 2012 no longer makes the index v4 format
"relatively young".
The support for the index version 4 was added to libgit2 with their
5625d86b (index: support index v4, 2016-05-17) and to JGit with
their e9cb0a8e (DirCache: support index V4, 2020-08-10).
Let's update the paragraph that discouraged its use for folks overly
cautious about cross-tool compatibility.
Helped-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--trailer` option takes a "<token>=<value>" argument, for example
--trailer "Acked-by=Bob"
And in this exampple it is understood that "Acked-by" is the <token>.
However, the user can use a shorter "ack" string by defining
configuration like
git config trailer.ack.key "Acked-by"
However, in the docs we define the above configuration as
trailer.<token>.key
so the <token> can mean either the longer "Acked-by" or the shorter
"ack".
Separate the two meanings of <token> into <key> and <keyAlias>, and
update the configuration syntax to say "trailer.<keyAlias>.key".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sentence does not mention the effect of configuration variables at
all, when they are actively used by default (unless --parse is
specified) to potentially add new trailers, without the user having to
always supply --trailer manually.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "join whitespace-continued values" requires some additional
context. For example, "whitespace" means newlines (not just space
characters), and "join" means to join only the multiple lines together
for a single trailer (and not that we are joining multiple trailers
together). That is, "join" means to convert
token: This is a very long value, with spaces and
newlines in it.
to
token: This is a very long value, with spaces and newlines in it.
and does not mean to convert
token: value1
token: value2
to
token: value1 value2.
Update the help text to resolve the above ambiguity. While we're add it,
update the docs to use similar language as the change in the help text.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For users who are skimming the docs to go straight to the individual
breakdown of each flag, it may not be clear why --parse is a convenience
alias (without them also looking at the other options that --parse turns
on). To save them the trouble of looking at the other options (and
computing what that would mean), describe a summary of the overall
effect.
Similarly update the area when we first mention --parse near the top of
the doc.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the phrase "configuration variables" instead of "rules" because
(1) we already say "configuration variables" in multiple
places in the docs (where the word "rules" is only used for describing
"--only-input" behavior and for an unrelated case of mentioning how
the trailers do not follow "rules for RFC 822 headers"), and
(2) this phrase is more specific than just "rules".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the help text to say "placement" instead of "action" because the
values are placements, not actions.
While we're at it, tweak the documentation to say "placements" instead
of "values", similar to how the existing language for "--if-exists" uses
the word "action" to describe both the syntax (with the phrase
"--if-exists <action>") and the possible values (with the phrase
"possible actions").
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wording "all configuration variables" is misleading (the same could
be said to the descriptions of the "--[no-]if-exists" and the
"--[no-]if-missing" options). Specifying --where=value overrides only
the trailer.where variable and applicable trailer.<token>.where
variables, and --no-where stops the overriding of these variables.
Ditto for the other two with their relevant configuration variables.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the "--no-where" flag is tested, the "--no-if-exists" and
"--no-if-missing" flags are not, so add tests for them. But also add
tests for all "--no-*" flags to check their effects, both when (1) there
are relevant configuration variables set, and (2) they are not set.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --rfc --subject-prefix=<foo>" used to ignore the
"--subject-prefix" option and used "[RFC PATCH]"; now we will add
"RFC" prefix to whatever subject prefix is specified.
This is a backward compatible change that may deserve a note.
* dd/format-patch-rfc-updates:
format-patch: --rfc honors what --subject-prefix sets
Use of --max-pack-size to allow multiple packfiles to be created is
now supported even when we are sending unreachable objects to cruft
packs.
* tb/multi-cruft-pack:
Documentation/gitformat-pack.txt: drop mixed version section
Documentation/gitformat-pack.txt: remove multi-cruft packs alternative
builtin/pack-objects.c: support `--max-pack-size` with `--cruft`
builtin/pack-objects.c: remove unnecessary strbuf_reset()
When formatted as man-page, the section title is rendered
"GENERATING PATCH TEXT WITH -P" whereas reference still reads
"Generating patch text with -p", that is inconsistent and makes
searching harder than it needs to be.
Fix this by getting rid of custom reference text.
Also, documentation for every command that describes `-p` option by
including the "diff-options.txt" file does include the
"diff-generate-patch.txt" file as well (as it should), so the internal
link is in fact useful for any of them.
Fix this by getting rid of conditionals around the reference.
Fixes: ebdc46c242 (docs: link generating patch sections)
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The section is inspired by git-commit.txt.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learns a way to feed cover letter description,
that (1) can be used on detached HEAD where there is no branch
description available, and (2) also can override the branch
description if there is one.
* ob/format-patch-description-file:
format-patch: add --description-file option
Most of our tree traversal algorithms use recursion to visit sub-trees.
For pathologically large trees, this can cause us to run out of stack
space and abort in an uncontrolled way. Let's put our own limit here so
that we can fail gracefully rather than segfaulting.
In similar cases where we recursed along the commit graph, we rewrote
the algorithms to avoid recursion and keep any stack data on the heap.
But the commit graph is meant to grow without bound, whereas it's not an
imposition to put a limit on the maximum size of tree we'll handle.
And this has a bonus side effect: coupled with a limit on individual
tree entry names, this limits the total size of a path we may encounter.
This gives us an extra protection against code handling long path names
which may suffer from integer overflows in the size (which could then be
exploited by malicious trees).
The default of 4096 is set to be much longer than anybody would care
about in the real world. Even with single-letter interior tree names
(like "a/b/c"), such a path is at least 8191 bytes. While most operating
systems will let you create such a path incrementally, trying to
reference the whole thing in a system call (as Git would do when
actually trying to access it) will result in ENAMETOOLONG. Coupled with
the recent fsck.largePathname warning, the maximum total pathname Git
will handle is (by default) 16MB.
This config option doesn't do anything yet; future patches will convert
various algorithms to respect the limit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, Git tries not to arbitrarily limit what it will store, and
there are currently no limits at all on the size of the path we find in
a tree. In theory you could have one that is gigabytes long.
But in practice this freedom is not really helping anybody, and is
potentially harmful:
1. Most operating systems have much lower limits for the size of a
single pathname component (e.g., on Linux you'll generally get
ENAMETOOLONG for anything over 255 bytes). And while you _can_ use
Git in a way that never touches the filesystem (manipulating the
index and trees directly), it's still probably not a good idea to
have gigantic tree names. Many operations load and traverse them,
so any clever Git-as-a-database scheme is likely to perform poorly
in that case.
2. We still have a lot of code which assumes strings are reasonably
sized, and I won't be at all surprised if you can trigger some
interesting integer overflows with gigantic pathnames. Stopping
malicious trees from entering the repository provides an extra line
of defense, protecting downstream code.
This patch implements an fsck check so that such trees can be rejected
by transfer.fsckObjects. I've picked a reasonably high maximum depth
here (4096) that hopefully should not bother anybody in practice. I've
also made it configurable, as an escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than replacing the configured subject prefix (either through the
git config or command line) entirely with "RFC PATCH", this change
prepends RFC to whatever subject prefix was already in use.
This is useful, for example, when a user is working on a repository that
has a subject prefix considered to disambiguate patches:
git config format.subjectPrefix 'PATCH my-project'
Prior to this change, formatting patches with --rfc would lose the
'my-project' information.
The data flow for the subject-prefix was that rev.subject_prefix
were to be kept the authoritative version of the subject prefix even
while parsing command line options, and sprefix variable was used as
a temporary area to futz with it. Now, the parsing code has been
refactored to build the subject prefix into the sprefix variable and
assigns its value at the end to rev.subject_prefix, which makes the
flow easier to grasp.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This section was added in 3d89a8c118 (Documentation/technical: add
cruft-packs.txt, 2022-05-20) to highlight a potential pitfall when
deploying cruft packs in an environment where multiple versions of Git
are GC-ing the same repository.
Now that it has been more than a year since 3d89a8c118 was written,
let's drop this section as it is no longer relevant.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This text, originally from 3d89a8c118 (Documentation/technical: add
cruft-packs.txt, 2022-05-20) lists multiple cruft packs as a potential
alternative to the design of cruft packs.
We have always supported multiple cruft packs (i.e. we use the most
recent mtime for a given object among all cruft packs which contain it,
etc.), but haven't encouraged its use.
We still aren't encouraging users to go out and generate multiple cruft
packs, but let's take a step in that direction by dropping language that
suggests we aren't capable of working with multiple cruft packs.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects learned the `--cruft` option back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20), we
explicitly forbade `--cruft` with `--max-pack-size`.
At the time, there was no specific rationale given in the patch for not
supporting the `--max-pack-size` option with `--cruft`. (As best I can
remember, it's because we were trying to push users towards only ever
having a single cruft pack, but I cannot be sure).
However, `--max-pack-size` is flexible enough that it already works with
`--cruft` and can shard unreachable objects across multiple cruft packs,
creating separate ".mtimes" files as appropriate. In fact, the
`--max-pack-size` option worked with `--cruft` as far back as
b757353676!
This is because we overwrite the `written_list`, and pass down the
appropriate length, i.e. the number of objects written in each pack
shard.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two topics did not see much interest and reviews while they
were on 'next'; let's "inflict" them to the general public and see
if anybody screams, which is much less nicer way than to merge
only topics that are well reviewed down in an orderly manner, but
that is the only thing we can do to these topics without any
development community help.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have strong aversions to Scalar's opinion that the repository
should be in a 'src' directory, even though this creates a clean slate
for placing build artifacts in adjacent directories.
The new --no-src option allows users to opt out of the default behavior.
While adding options, make sure the usage output by 'scalar clone -h'
reports the same as the SYNOPSIS line in Documentation/scalar.txt.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" learned to signal which options can be negated by
listing such options like "--[no-]opt".
* rs/parse-options-negation-help:
parse-options: simplify usage_padding()
parse-options: no --[no-]no-...
parse-options: factor out usage_indent() and usage_padding()
parse-options: show negatability of options in short help
t1502: test option negation
t1502: move optionspec help output to a file
t1502, docs: disallow --no-help
subtree: disallow --no-{help,quiet,debug,branch,message}
Overly long label names used in the sequencer machinery are now
chopped to fit under filesystem limitation.
* mp/rebase-label-length-limit:
rebase: allow overriding the maximal length of the generated labels
sequencer: truncate labels to accommodate loose refs
This patch makes it possible to directly feed a branch description to
derive the cover letter from. The use case is formatting dynamically
created temporary commits which are not referenced anywhere.
The most obvious alternative would be creating a temporary branch and
setting a description on it, but that doesn't seem particularly elegant.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add pointer and tag options to %(decorate) format, to allow to override
the " -> " string used to show where HEAD points and the "tag: " string
used to mark tags.
Document in pretty-formats.txt and test in t4205-log-pretty-formats.sh.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add %(decorate[:<options>]) format that lists ref names similarly to the
%d format, but which allows the otherwise fixed prefix, suffix and
separator strings to be customized. Omitted options default to the
strings used in %d.
Rename expand_separator() function used to expand %x literal formatting
codes to expand_string_arg(), as it is now used on strings other than
separators.
Examples:
- %(decorate) is equivalent to %d.
- %(decorate:prefix=,suffix=) is equivalent to %D.
- %(decorate:prefix=[,suffix=],separator=%x3B) produces a list enclosed
in square brackets and separated by semicolons.
Test the format in t4205-log-pretty-formats.sh and document it in
pretty-formats.txt.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enclose the 'options' placeholders in the documentation of the
%(describe) and %(trailers) format specifiers in angle brackets to
clarify that they are placeholders rather than keywords.
Also remove the indentation from their descriptions, instead of
increasing it to account for the extra two angle brackets in the
headings. The indentation isn't required by asciidoc, it doesn't reflect
how the output text is formatted, and it's inconsistent with the
following bullet points that are at the same level in the output.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for a %(trailer) option already uses this term without
having a definition anywhere in the document, and we are about to add
another one in %(decorate) that uses it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typo/grammofix to documentation added during this cycle.
* tl/notes-separator:
notes doc: tidy up `--no-stripspace` paragraph
notes doc: split up run-on sentences
With `--stdin`, we read *from* standard input, not *for*.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit 00bf685975 (show-ref doc: update for internal consistency,
2023-05-19) switched from double quotes to backticks around our {caret}
macro, we started rendering "{caret}" literally. Fix this by replacing
by a "^" character.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where we document the `--no-stripspace` option, remove a superfluous
"For" to fix the grammar. Mark option names and command names using
`backticks` to set them in monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit c4e2aa7d45 (notes.c: introduce "--[no-]stripspace" option,
2023-05-27) mentioned the new `--no-stripspace` in the documentation for
`-m` and `-F`, it created run-on sentences. It also used slightly
different language in the two sections for no apparent reason. Split the
sentences in two to improve readability, and while touching the two
sites, make them more similar.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change, users can override the compiled-in default for the
maximal length of the label names generated by `git rebase
--rebase-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Mark Ruvald Pedersen <mped@demant.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on a blog post and using grammarly it suggested this
change.
Signed-off-by: Wesley Schwengle <wesleys@opperschaap.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect visualize" stopped running "gitk" on Git for Windows
when the command was reimplemented in C around Git 2.34 timeframe.
This has been corrected.
* ma/locate-in-path-for-windows:
docs: update when `git bisect visualize` uses `gitk`
compat/mingw: implement a native locate_in_PATH()
run-command: conditionally define locate_in_PATH()
Tone down the warning on SHA-256 repositories being an experimental
curiosity. We do not have support for them to interoperate with
traditional SHA-1 repositories, but at this point, we do not plan
to make breaking changes to SHA-256 repositories and there is no
longer need for such a strongly phrased warning.
* am/doc-sha256:
doc: sha256 is no longer experimental
Add a "[no-]" prefix to options without the flag PARSE_OPT_NONEG to
document the fact that you can negate them.
This looks a bit strange for options that already start with "no-", e.g.
for the option --no-name of git show-branch:
--[no-]no-name suppress naming strings
You can actually use --no-no-name as an alias of --name, so the short
help is not wrong. If we strip off any of the "no-"s, we lose either
the ability to see if the remaining one belongs to the documented
variant or to see if it can be negated.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse --parseopt" handles the built-in options -h and --help,
but not --no-help. Make test definitions and documentation examples
more realistic by disabling negation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify how to pick a starting point for a new topic in the
SubmittingPatches document.
* la/doc-choose-starting-point-fixup:
SubmittingPatches: use of older maintenance tracks is an exception
SubmittingPatches: explain why 'next' and above are inappropriate base
SubmittingPatches: choice of base for fixing an older maintenance track
Rewrite the description of giving a custom command to the
submodule.<name>.update configuration variable.
* pv/doc-submodule-update-settings:
doc: highlight that .gitmodules does not support !command
Clarify how to choose the starting point for a new topic in
developer guidance document.
* la/doc-choose-starting-point:
SubmittingPatches: simplify guidance for choosing a starting point
SubmittingPatches: emphasize need to communicate non-default starting points
SubmittingPatches: de-emphasize branches as starting points
SubmittingPatches: discuss subsystems separately from git.git
SubmittingPatches: reword awkward phrasing
This check has involved more environment variables than just `DISPLAY` since
508e84a790 (bisect view: check for MinGW32 and MacOSX in addition to X11,
2008-02-14), so let's update the documentation accordingly.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo introduced in aa9166bcc0 (The ninth batch, 2023-07-08).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list --format=<format>" and friends are taught
a new "%(describe)" placeholder.
* ks/ref-filter-describe:
ref-filter: add new "describe" atom
ref-filter: add multiple-option parsing functions
Recreating unmerged index entries using resolve-undo data,
recreating conflicted working tree files using unmerged index
entries, and writing data out of unmerged index entries, make
sense only when we are checking paths out of the index and not when
we are checking paths out of a tree-ish.
Add an extra check to make sure "--merge" and "--ours/--theirs"
options are rejected when checking out from a tree-ish, update the
document (especially the SYNOPSIS section) to highlight that they
are incompatible, and add a few tests to make sure the combination
fails.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove scary wording that basically stops people using sha256
repositories not because of interoperability issues with sha1
repositories, but from fear that their work will suddenly become
incompatible in some future version of git.
We should be clear that currently sha256 repositories will not work with
sha1 repositories but stop the scary words.
Signed-off-by: Adam Majer <adamm@zombino.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finding mistakes in and improving your own patches is a good idea,
but doing so too quickly is being inconsiderate to reviewers who
have just seen the initial iteration and taking their time to review
it. Encourage new developers to perform such a self review before
they send out their patches, not after. After sending a patch that
they immediately found mistakes in, they are welcome to comment on
them, mentioning what and how they plan to improve them in an
updated version, before sending out their updates.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we could technically fix each and every bug on top of the
commit that introduced it, it is not necessarily practical. For
trivial and low-value bugfixes, it often is simpler and sufficient
to just fix it in the current maintenance track, leaving the bug
unfixed in the older maintenance tracks.
Demote the "use older maintenance track to fix old bugs" as a side
note, and explain that the choice is used only in exceptional cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'next' branch is primarily meant to be a testing ground to make
sure that topics that are reasonably well done work well together.
Building a new work on it would mean everything that was already in
'next' must have graduated to 'master' before the new work can also
be merged to 'master', and that is why we do not encourage basing
new work on 'next'.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working on an high-value bugfix that must be given to ancient
maintenance tracks, a starting point that is older than `maint` may
have to be chosen.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfix for fc01a5d2 (submodule update documentation: don't repeat
ourselves, 2016-12-27).
The `custom command` and `none` options are described as sharing the
same limitations, but one is allowed in .gitmodules and the other is
not.
Rewrite the description for custom commands to be more precise,
and make it easier for readers to notice that custom commands cannot
be used in the .gitmodules file.
Signed-off-by: Petar Vutov <pvutov@imap.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Duplicate the logic of %(describe) and friends from pretty to
ref-filter. In the future, this change helps in unifying both the
formats as ref-filter will be able to do everything that pretty is doing
and we can have a single interface.
The new atom "describe" and its friends are equivalent to the existing
pretty formats with the same name.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
In the "PATTERN FORMAT" section, all the other pattern elements are
shown as `monospace` literals inside "double quoted" strings. Do
the same for the explanation of a slash to make it consistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among four examples, only this one used "double quoted" sample
patterns, but all others marked up the patterns in `monospace`.
Signed-off-by: Johan Ruokangas <johan@latehours.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code snippets in a tutorial document no longer compiled after
recent header shuffling, which have been corrected.
* vd/adjust-mfow-doc-to-updated-headers:
docs: add necessary headers to Documentation/MFOW.txt
The "git for-each-ref" family of commands learned placeholders
related to GPG signature verification.
* ks/ref-filter-signature:
ref-filter: add new "signature" atom
t/lib-gpg: introduce new prereq GPG2
Background: The guidance to "base your work on the oldest branch that
your change is relevant to" was added in d0c26f0f56 (SubmittingPatches:
Add new section about what to base work on, 2010-04-19). That commit
also added the bullet points which describe the scenarios where one
would use one of the following named branches: "maint", "master",
"next", and "seen" ("pu" in the original as that was the name of this
branch before it was renamed, per 828197de8f (docs: adjust for the
recent rename of `pu` to `seen`, 2020-06-25)). The guidance was probably
taken from existing similar language introduced in the "Merge upwards"
section of gitworkflows in f948dd8992 (Documentation: add manpage about
workflows, 2008-10-19).
Summary: This change simplifies the guidance by pointing users to just
"maint" or "master". But it also gives an explanation of why that is
preferred and what is meant by preferring "older" branches (which might
be confusing to some because "old" here is meant in relative terms
between these named branches, not in terms of the age of the branches
themselves). We also add an example to illustrate why it would be a bad
idea to use "next" as a starting point, which may not be so obvious to
new contributors.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase
and unless it targets the `master` branch (which is the default),
mark your patches as such.
is tightly packed with several things happening in just two lines of
text. It also feels like it is not that important because of the terse
treatment. This is a problem because (1) it has the potential to confuse
new contributors, and (2) it may be glossed over for those skimming the
docs.
Emphasize and elaborate on this guidance by promoting it to its own
separate paragraph.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It could be that a suitable branch does not exist, so instead just use
the phrase "starting point". Technically speaking the starting point
would be a commit (not a branch) anyway.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion around subsystems disrupts the flow of discussion in the
surrounding area, which only deals with starting points used for the
git.git project. So move this bullet point out to the end.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `for-each-ref`, it is sometimes convenient for the caller to
be able to exclude certain parts of the references.
For example, if there are many `refs/__hidden__/*` references, the
caller may want to emit all references *except* the hidden ones.
Currently, the only way to do this is to post-process the output, like:
$ git for-each-ref --format='%(refname)' | grep -v '^refs/hidden/'
Which is do-able, but requires processing a potentially large quantity
of references.
Teach `git for-each-ref` a new `--exclude=<pattern>` option, which
excludes references from the results if they match one or more excluded
patterns.
This patch provides a naive implementation where the `ref_filter` still
sees all references (including ones that it will discard) and is left to
check whether each reference matches any excluded pattern(s) before
emitting them.
By culling out references we know the caller doesn't care about, we can
avoid allocating memory for their storage, as well as spending time
sorting the output (among other things). Even the naive implementation
provides a significant speed-up on a modified copy of linux.git (that
has a hidden ref pointing at each commit):
$ hyperfine \
'git.compile for-each-ref --format="%(objectname) %(refname)" | grep -vE "[0-9a-f]{40} refs/pull/"' \
'git.compile for-each-ref --format="%(objectname) %(refname)" --exclude refs/pull/'
Benchmark 1: git.compile for-each-ref --format="%(objectname) %(refname)" | grep -vE "[0-9a-f]{40} refs/pull/"
Time (mean ± σ): 820.1 ms ± 2.0 ms [User: 703.7 ms, System: 152.0 ms]
Range (min … max): 817.7 ms … 823.3 ms 10 runs
Benchmark 2: git.compile for-each-ref --format="%(objectname) %(refname)" --exclude refs/pull/
Time (mean ± σ): 106.6 ms ± 1.1 ms [User: 99.4 ms, System: 7.1 ms]
Range (min … max): 104.7 ms … 109.1 ms 27 runs
Summary
'git.compile for-each-ref --format="%(objectname) %(refname)" --exclude refs/pull/' ran
7.69 ± 0.08 times faster than 'git.compile for-each-ref --format="%(objectname) %(refname)" | grep -vE "[0-9a-f]{40} refs/pull/"'
Subsequent patches will improve on this by avoiding visiting excluded
sections of the `packed-refs` file in certain cases.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Link to community list of credential helpers. This is useful information
for users.
Describe how OAuth credential helpers work. OAuth is a user-friendly
alternative to personal access tokens and SSH keys. Reduced setup cost
makes it easier for users to contribute to projects across multiple
forges.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git notes append' was taught '--separator' to specify string to insert
between paragraphs.
* tl/notes-separator:
notes: introduce "--no-separator" option
notes.c: introduce "--[no-]stripspace" option
notes.c: append separator instead of insert by pos
notes.c: introduce '--separator=<paragraph-break>' option
t3321: add test cases about the notes stripspace behavior
notes.c: use designated initializers for clarity
notes.c: cleanup 'strbuf_grow' call in 'append_edit'
The tutorial in Documentation/MyFirstObjectWalk.txt
contains the functions trace_printf(), oid_to_hex(),
and pp_commit_easy(), and struct oidset, which are used
without any hint of where they are defined. When the provided
code is compiled, the compiler returns an error, stating that
the functions and the struct are used before declaration. Therefore,include
necessary header files (the ones which have no mentions in the tutorial).
Signed-off-by: Vinayak Dev <vinayakdev.sci@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more "git var" for toolsmiths to learn various locations Git is
configured with either via the configuration or hardcoded defaults.
* bc/more-git-var:
var: add config file locations
var: add attributes files locations
attr: expose and rename accessor functions
var: adjust memory allocation for strings
var: format variable structure with C99 initializers
var: add support for listing the shell
t: add a function to check executable bit
var: mark unused parameters in git_var callbacks
The set-up code for the get_revision() API now allows feeding
options like --all and --not in the --stdin mode.
* ps/revision-stdin-with-options:
revision: handle pseudo-opts in `--stdin` mode
revision: small readability improvement for reading from stdin
revision: reorder `read_revisions_from_stdin()`
When the external merge driver is killed by a signal, its output
should not be trusted as a resolution with conflicts that is
proposed by the driver, but the code did.
* jc/abort-ll-merge-with-a-signal:
t6406: skip "external merge driver getting killed by a signal" test on Windows
ll-merge: killing the external merge driver aborts the merge
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
The summary under the NAME section for git hash-object can mislead
readers to conclude that the command can only be used to create blobs,
whereas the description makes it clear that it can be used to create
objects, not just blobs. Let's clarify the one-line summary.
Further, the description for the option -t does not list out other types
that can be used when creating objects. Let's make this explicit by
listing out the different object types.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like with attributes files, sometimes programs would like to know
the location of configuration files at the global or system levels.
However, it isn't always clear where these may live, especially for the
system file, which may have been hard-coded at compile time or computed
dynamically based on the runtime prefix.
Since other parties cannot intuitively know how Git was compiled and
where it looks for these files, help them by providing variables that
can be queried. Because we have multiple paths for global config
values, print them in order from highest to lowest priority, and be sure
to split on newlines so that "git var -l" produces two entries for the
global value.
However, be careful not to split all values on newlines, since our
editor values could well contain such characters, and we don't want to
split them in such a case.
Note in the documentation that some values may contain multiple paths
and that callers should be prepared for that fact. This helps people
write code that will continue to work in the event we allow multiple
items elsewhere in the future.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there are some programs which would like to read and parse
the gitattributes files at the global or system levels. However, it's
not always obvious where these files live, especially for the system
file, which may have been hard-coded at compile time or computed
dynamically based on the runtime prefix.
It's not reasonable to expect all callers of Git to intuitively know
where the Git distributor or user has configured these locations to
be, so add some entries to allow us to determine their location. Honor
the GIT_ATTR_NOSYSTEM environment variable if one is specified. Expose
the accessor functions in a way that we can reuse them from within the
var code.
In order to make our paths consistent on Windows and also use the same
form as paths use in "git rev-parse", let's normalize the path before we
return it. This results in Windows-style paths that use slashes, which
is convenient for making our tests function in a consistent way across
platforms. Note that this requires that some of our values be freed, so
let's add a flag about whether the value needs to be freed and use it
accordingly.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On most Unix systems, finding a suitable shell is easy: one simply uses
"sh" with an appropriate PATH value. However, in many Windows
environments, the shell is shipped alongside Git, and it may or may not
be in PATH, even if Git is.
In such an environment, it can be very helpful to query Git for the
shell it's using, since other tools may want to use the same shell as
well. To help them out, let's add a variable, GIT_SHELL_PATH, that
points to the location of the shell.
On Unix, we know our shell must be executable to be functional, so
assume that the distributor has correctly configured their environment,
and use that as a basic test. On Git for Windows, we know that our
shell will be one of a few fixed values, all of which end in "sh" (such
as "bash"). This seems like it might be a nice test on Unix as well,
since it is customary for all shells to end in "sh", but there probably
exist such systems that don't have such a configuration, so be careful
here not to break them.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" learned to invoke a new hook program that
enumerates extra objects to be used as anchoring points to keep
otherwise unreachable objects in cruft packs.
* tb/gc-recent-object-hook:
gc: introduce `gc.recentObjectsHook`
reachable.c: extract `obj_is_recent()`
When an external merge driver dies with a signal, we should not
expect that the result left on the filesystem is in any useful
state. However, because the current code uses the return value from
run_command() and declares any positive value as a sign that the
driver successfully left conflicts in the result, and because the
return value from run_command() for a subprocess that died upon a
signal is positive, we end up treating whatever garbage left on the
filesystem as the result the merge driver wanted to leave us.
run_command() returns larger than 128 (WTERMSIG(status) + 128, to be
exact) when it notices that the subprocess died with a signal, so
detect such a case and return LL_MERGE_ERROR from ll_ext_merge().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Suggest to refrain from using hex literals that are non-portable
when writing printf(1) format strings.
* jt/doc-use-octal-with-printf:
CodingGuidelines: use octal escapes, not hex
"git cat-file --batch" and friends learned "-Z" that uses NUL
delimiter for both input and output.
* ps/cat-file-null-output:
cat-file: add option '-Z' that delimits input and output with NUL
cat-file: simplify reading from standard input
strbuf: provide CRLF-aware helper to read until a specified delimiter
t1006: modernize test style to use `test_cmp`
t1006: don't strip timestamps from expected results
The object traversal using reachability bitmap done by
"pack-object" has been tweaked to take advantage of the fact that
using "boundary" commits as representative of all the uninteresting
ones can save quite a lot of object enumeration.
* tb/pack-bitmap-traversal-with-boundary:
pack-bitmap.c: use commit boundary during bitmap traversal
pack-bitmap.c: extract `fill_in_bitmap()`
object: add object_array initializer helper function
'git worktree add' learned how to create a worktree based on an
orphaned branch with `--orphan`.
* ja/worktree-orphan:
worktree add: emit warn when there is a bad HEAD
worktree add: extend DWIM to infer --orphan
worktree add: introduce "try --orphan" hint
worktree add: add --orphan flag
t2400: add tests to verify --quiet
t2400: refactor "worktree add" opt exclusion tests
t2400: cleanup created worktree in test
worktree add: include -B in usage docs
A long term (but rather minor) pet-peeve of mine was the name
ll-merge.[ch]. I thought it made it harder to realize what stuff was
related to merging when I was working on the merge machinery and trying
to improve it.
Further, back in d1cbe1e6d8 ("hash-ll.h: split out of hash.h to remove
dependency on repository.h", 2023-04-22), we have split the portions of
hash.h that do not depend upon repository.h into a "hash-ll.h" (due to
the recommendation to use "ll" for "low-level" in its name[1], but which
I used as a suffix precisely because of my distaste for "ll-merge").
When we discussed adding additional "*-ll.h" files, a request was made
that we use "ll" consistently as either a prefix or a suffix. Since it
is already in use as both a prefix and a suffix, the only way to do so
is to rename some files.
Besides my distaste for the ll-merge.[ch] name, let me also note that
the files
ll-fsmonitor.h, ll-hash.h, ll-merge.h, ll-object-store.h, ll-read-cache.h
would have essentially nothing to do with each other and make no sense
to group. But giving them the common "ll-" prefix would group them. Using
"-ll" as a suffix thus seems just much more logical to me. Rename
ll-merge.[ch] to merge-ll.[ch] to achieve this consistency, and to
ensure we get a more logical grouping of files.
[1] https://lore.kernel.org/git/kl6lsfcu1g8w.fsf@chooglen-macbookpro.roam.corp.google.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces a new option "--[no-]stripspace" to git notes
append, git notes edit, and git notes add. This option allows users to
control whether the note message need to stripped out.
For the consideration of backward compatibility, let's look at the
behavior about "stripspace" in "git notes" command:
1. "Edit Message" case: using the default editor to edit the note
message.
In "edit" case, the edited message will always be stripped out, the
implementation which can be found in the "prepare_note_data()". In
addition, the "-c" option supports to reuse an existing blob as a
note message, then open the editor to make a further edition on it,
the edited message will be stripped.
This commit doesn't change the default behavior of "edit" case by
using an enum "notes_stripspace", only when "--no-stripspace" option
is specified, the note message will not be stripped out. If you do
not specify the option or you specify "--stripspace", clearly, the
note message will be stripped out.
2. "Assign Message" case: using the "-m"/"-F"/"-C" option to specify the
note message.
In "assign" case, when specify message by "-m" or "-F", the message
will be stripped out by default, but when specify message by "-C",
the message will be copied verbatim, in other word, the message will
not be stripped out. One more thing need to note is "the order of
the options matter", that is, if you specify "-C" before "-m" or
"-F", the reused message by "-C" will be stripped out together,
because everytime concat "-m" or "-F" message, the concated message
will be stripped together. Oppositely, if you specify "-m" or "-F"
before "-C", the reused message by "-C" will not be stripped out.
This commit doesn't change the default behavior of "assign" case by
extending the "stripspace" field in "struct note_msg", so we can
distinguish the different behavior of "-m"/"-F" and "-C" options
when we need to parse and concat the message.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding new notes or appending to an existing notes, we will
insert a blank line between the paragraphs, like:
$ git notes add -m foo -m bar
$ git notes show HEAD
foo
bar
The default behavour sometimes is not enough, the user may want
to use a custom delimiter between paragraphs, like when
specifying '-m', '-F', '-C', '-c' options. So this commit
introduce a new '--separator' option for 'git notes add' and
'git notes append', for example when executing:
$ git notes add -m foo -m bar --separator="-"
$ git notes show HEAD
foo
-
bar
a newline is added to the value given to --separator if it
does not end with one already. So when executing:
$ git notes add -m foo -m bar --separator="-"
and
$ export LF="
"
$ git notes add -m foo -m bar --separator="-$LF"
Both the two exections produce the same result.
The reason we use a "strbuf" array to concat but not "string_list", is
that the binary file content may contain '\0' in the middle, this will
cause the corrupt result if using a string to save.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document more pseudo-refs and teach the command line completion
machinery to complete AUTO_MERGE.
* pb/complete-and-document-auto-merge-and-friends:
completion: complete AUTO_MERGE
Documentation: document AUTO_MERGE
git-merge.txt: modernize word choice in "True merge" section
completion: complete REVERT_HEAD and BISECT_HEAD
revisions.txt: document more special refs
revisions.txt: use description list for special refs
`credential reject` sends the erase action to each helper, but the
exact behaviour of erase isn't specified in documentation or tests.
Some helpers (such as credential-store and credential-libsecret) delete
all matching credentials, others (such as credential-cache) delete at
most one matching credential.
Test that helpers erase all matching credentials. This behaviour is
easiest to reason about. Users expect that `echo
"url=https://example.com" | git credential reject` or `echo
"url=https://example.com\nusername=tim" | git credential reject` erase
all matching credentials.
Fix credential-cache.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While both git-rev-list(1) and git-log(1) support `--stdin`, it only
accepts commits and files. Most notably, it is impossible to pass any of
the pseudo-opts like `--all`, `--glob=` or others via stdin.
This makes it hard to use this function in certain scripted scenarios,
like when one wants to support queries against specific revisions, but
also against reference patterns. While this is theoretically possible by
using arguments, this may run into issues once we hit platform limits
with sufficiently large queries. And because `--stdin` cannot handle
pseudo-opts, the only alternative would be to use a mixture of arguments
and standard input, which is cumbersome.
Implement support for handling pseudo-opts in both commands to support
this usecase better. One notable restriction here is that `--stdin` only
supports "stuck" arguments in the form of `--glob=foo`. This is because
"unstuck" arguments would also require us to read the next line, which
would add quite some complexity to the code. This restriction should be
fine for scripted usage though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree --format expands %x followed by two hexadecimal digits to the
character indicated by that hexadecimal number, e.g.:
$ git ls-tree --format=%x41 HEAD | head -1
A
It rejects % followed by a hexadecimal digit, e.g.:
$ git ls-tree --format=%41 HEAD | head -1
fatal: bad ls-tree format: element '41' does not start with '('
This functionality is provided by strbuf_expand_literal_cb(), which has
not been changed since it was factored out by fd2015b323 (strbuf:
separate callback for strbuf_expand:ing literals, 2019-01-28).
Adjust the documentation accordingly.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Be more up-front about what trailers are in practice with examples, to
give the reader a visual cue while they go on to read the rest of the
description.
Also add an example for multiline values.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'key' option is used frequently in the examples at the bottom but
there is no mention of it in the description.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts the deprecation notice up front, instead of leaving it to the
next paragraph.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already use angle brackets elsewhere, so this makes things more
consistent.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "many rules" gets essentially repeated again with "many other
rules", so remove this repetition.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, "message" could mean the input, output, commit message, or
"internal body text inside the commit message" (in the EXAMPLES
section). Avoid overloading this term by using the appropriate meanings
explicitly.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command can take inputs that are either just a commit message, or
an email-like output such as git-format-patch which includes a commit
message, "---" divider, and patch part. The existing explanation blends
these two inputs together in the first sentence
This command reads some patches or commit messages
which then necessitates using the "commit message part" phrasing (as
opposed to just "commit message") because the input is ambiguous per the
above definition.
This change separates the two input types and explains them separately,
and so there is no longer a need to use the "commit message part"
phrase.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the order already used in the NAME section.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the shell-scripting section of CodingGuidelines to suggest octal
escape sequences (e.g. "\302\242") over hexadecimal (e.g. "\xc2\xa2")
since the latter can be a source of portability problems.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some atoms that can be used in "--format=<format>" for "git ls-tree"
were not supported by "git ls-files", even though they were relevant
in the context of the latter.
* zh/ls-files-format-atoms:
ls-files: align format atoms with ls-tree
"git pack-refs" learns "--include" and "--exclude" to tweak the ref
hierarchy to be packed using pattern matching.
* jc/pack-ref-exclude-include:
pack-refs: teach pack-refs --include option
pack-refs: teach --exclude option to exclude refs from being packed
docs: clarify git-pack-refs --all will pack all refs
Doc update.
* sa/doc-ls-remote:
ls-remote doc: document the output format
ls-remote doc: explain what each example does
ls-remote doc: show peeled tags in examples
ls-remote doc: remove redundant --tags example
show-branch doc: say <ref>, not <reference>
show-ref doc: update for internal consistency
The "-s" (silent, squelch) option of the "diff" family of commands
did not interact with other options that specify the output format
well. This has been cleaned up so that it will clear all the
formatting options given before.
* jc/diff-s-with-other-options:
diff: fix interaction between the "-s" option and other options
"git tag" learned to leave the "$GIT_DIR/TAG_EDITMSG" file when the
command failed, so that the user can salvage what they typed.
* kh/keep-tag-editmsg-upon-failure:
tag: keep the message file in case ref transaction fails
t/t7004-tag: add regression test for successful tag creation
doc: tag: document `TAG_EDITMSG`
This patch introduces a new multi-valued configuration option,
`gc.recentObjectsHook` as a means to mark certain objects as recent (and
thus exempt from garbage collection), regardless of their age.
When performing a garbage collection operation on a repository with
unreachable objects, Git makes its decision on what to do with those
object(s) based on how recent the objects are or not. Generally speaking,
unreachable-but-recent objects stay in the repository, and older objects
are discarded.
However, we have no convenient way to keep certain precious, unreachable
objects around in the repository, even if they have aged out and would
be pruned. Our options today consist of:
- Point references at the reachability tips of any objects you
consider precious, which may be undesirable or infeasible if there
are many such objects.
- Track them via the reflog, which may be undesirable since the
reflog's lifetime is limited to that of the reference it's tracking
(and callers may want to keep those unreachable objects around for
longer).
- Extend the grace period, which may keep around other objects that
the caller *does* want to discard.
- Manually modify the mtimes of objects you want to keep. If those
objects are already loose, this is easy enough to do (you can just
enumerate and `touch -m` each one).
But if they are packed, you will either end up modifying the mtimes
of *all* objects in that pack, or be forced to write out a loose
copy of that object, both of which may be undesirable. Even worse,
if they are in a cruft pack, that requires modifying its `*.mtimes`
file by hand, since there is no exposed plumbing for this.
- Force the caller to construct the pack of objects they want
to keep themselves, and then mark the pack as kept by adding a
".keep" file. This works, but is burdensome for the caller, and
having extra packs is awkward as you roll forward your cruft pack.
This patch introduces a new option to the above list via the
`gc.recentObjectsHook` configuration, which allows the caller to
specify a program (or set of programs) whose output is treated as a set
of objects to treat as recent, regardless of their true age.
The implementation is straightforward. Git enumerates recent objects via
`add_unseen_recent_objects_to_traversal()`, which enumerates loose and
packed objects, and eventually calls add_recent_object() on any objects
for which `want_recent_object()`'s conditions are met.
This patch modifies the recency condition from simply "is the mtime of
this object more recent than the cutoff?" to "[...] or, is this object
mentioned by at least one `gc.recentObjectsHook`?".
Depending on whether or not we are generating a cruft pack, this allows
the caller to do one of two things:
- If generating a cruft pack, the caller is able to retain additional
objects via the cruft pack, even if they would have otherwise been
pruned due to their age.
- If not generating a cruft pack, the caller is likewise able to
retain additional objects as loose.
A potential alternative here is to introduce a new mode to alter the
contents of the reachable pack instead of the cruft one. One could
imagine a new option to `pack-objects`, say `--extra-reachable-tips`
that does the same thing as above, adding the visited set of objects
along the traversal to the pack.
But this has the unfortunate side-effect of altering the reachability
closure of that pack. If parts of the unreachable object graph mentioned
by one or more of the "extra reachable tips" programs is not closed,
then the resulting pack won't be either. This makes it impossible in the
general case to write out reachability bitmaps for that pack, since
closure is a requirement there.
Instead, keep these unreachable objects in the cruft pack (or set of
unreachable, loose objects) instead, to ensure that we can continue to
have a pack containing just reachable objects, which is always safe to
write a bitmap over.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were found with an automated CLI tool [1]. Only the
"Documentation" subfolder (and not source code files) was considered
because the docs are user-facing.
[1]: https://crates.io/crates/typos-cli
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In db9d67f2e9 (builtin/cat-file.c: support NUL-delimited input with
`-z`, 2022-07-22), we have introduced a new mode to read the input via
NUL-delimited records instead of newline-delimited records. This allows
the user to query for revisions that have newlines in their path
component. While unusual, such queries are perfectly valid and thus it
is clear that we should be able to support them properly.
Unfortunately, the commit only changed the input to be NUL-delimited,
but didn't change the output at the same time. While this is fine for
queries that are processed successfully, it is less so for queries that
aren't. In the case of missing commits for example the result can become
entirely unparsable:
```
$ printf "7ce4f05bae8120d9fa258e854a8669f6ea9cb7b1 blob 10\n1234567890\n\n\commit000" |
git cat-file --batch -z
7ce4f05bae blob 10
1234567890
commit missing
```
This is of course a crafted query that is intentionally gaming the
deficiency, but more benign queries that contain newlines would have
similar problems.
Ideally, we should have also changed the output to be NUL-delimited when
`-z` is specified to avoid this problem. As the input is NUL-delimited,
it is clear that the output in this case cannot ever contain NUL
characters by itself. Furthermore, Git does not allow NUL characters in
revisions anyway, further stressing the point that using NUL-delimited
output is safe. The only exception is of course the object data itself,
but as git-cat-file(1) prints the size of the object data clients should
read until that specified size has been consumed.
But even though `-z` has only been introduced a few releases ago in Git
v2.38.0, changing the output format retroactively to also NUL-delimit
output would be a backwards incompatible change. And while one could
make the argument that the output is inherently broken already, we need
to assume that there are existing users out there that use it just fine
given that revisions containing newlines are quite exotic.
Instead, introduce a new option `-Z` that switches to NUL-delimited
input and output. While this new option could arguably only switch the
output format to be NUL-delimited, the consequence would be that users
have to always specify both `-z` and `-Z` when the input may contain
newlines. On the other hand, if the user knows that there never will be
newlines in the input, they don't have to use either of those options.
There is thus no usecase that would warrant treating input and output
format separately, which is why we instead opt to "do the right thing"
and have `-Z` mean to NUL-terminate both formats.
The old `-z` option is marked as deprecated with a hint that its output
may become unparsable. It is thus hidden both from the synopsis as well
as the command's help output.
Co-authored-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Duplicate the code for outputting the signature and its other
parameters for commits and tags in ref-filter from pretty. In the
future, this will help in getting rid of the current duplicate
implementations of such logic everywhere, when ref-filter can do
everything that pretty is doing.
The new atom "signature" and its friends are equivalent to the existing
pretty formats as follows:
%(signature) = %GG
%(signature:grade) = %G?
%(siganture:signer) = %GS
%(signature:key) = %GK
%(signature:fingerprint) = %GF
%(signature:primarykeyfingerprint) = %GP
%(signature:trustlevel) = %GT
Co-authored-by: Hariom Verma <hariom18599@gmail.com>
Co-authored-by: Jaydeep Das <jaydeepjd.8914@gmail.com>
Co-authored-by: Nsengiyumva Wilberforce <nsengiyumvawilberforce@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --format" can be used to format the output of
multiple file entries in the index, while "git ls-tree --format"
can be used to format the contents of a tree object. However,
the current set of %(objecttype), "(objectsize)", and
"%(objectsize:padded)" atoms supported by "git ls-files --format"
is a subset of what is available in "git ls-tree --format".
Users sometimes need to establish a unified view between the index
and tree, which can help with comparison or conversion between the two.
Therefore, this patch adds the missing atoms to "git ls-files --format".
"%(objecttype)" can be used to retrieve the object type corresponding
to a file in the index, "(objectsize)" can be used to retrieve the
object size corresponding to a file in the index, and "%(objectsize:padded)"
is the same as "(objectsize)", except with padded format.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5291828df8 (merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a
conflict, 2021-03-20), when using the 'ort' merge strategy, the special
ref AUTO_MERGE is written when a merge operation results in conflicts.
This ref points to a tree recording the conflicted state of the working
tree and is very useful during conflict resolution. However, this ref is
not documented.
Add some documentation for AUTO_MERGE in git-diff(1), git-merge(1),
gitrevisions(7) and in the user manual.
In git-diff(1), mention it at the end of the description section, when
we mention that the command also accepts trees instead of commits, and
also add an invocation to the "Various ways to check your working tree"
example.
In git-merge(1), add a step to the list of things that happen "when it
is not obvious how to reconcile the changes", under the "True merge"
section. Also mention AUTO_MERGE in the "How to resolve conflicts"
section, when mentioning 'git diff'.
In gitrevisions(7), add a mention of AUTO_MERGE along with the other
special refs.
In the user manual, add a paragraph describing AUTO_MERGE to the
"Getting conflict-resolution help during a merge" section, and include
an example of a 'git diff AUTO_MERGE' invocation for the example
conflict used in that section. Note that for uniformity we do not use
backticks around AUTO_MERGE here since the rest of the document does not
typeset special refs differently.
Closes: https://github.com/gitgitgadget/git/issues/1471
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "True merge" section of the 'git merge' documentation mentions that
in case of conflicts, the conflicted working tree files contain "the
result of the "merge" program". This probably refers to RCS's 'merge'
program, which is mentioned further down under "How conflicts are
presented".
Since it is not clear at that point of the document which program is
referred to, and since most modern readers probably do not relate to RCS
anyway, let's just write "the merge operation" instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some special refs, namely HEAD, FETCH_HEAD, ORIG_HEAD, MERGE_HEAD and
CHERRY_PICK_HEAD, are mentioned and described in 'gitrevisions', but some
others, namely REBASE_HEAD, REVERT_HEAD, and BISECT_HEAD, are not.
Add a small description of these special refs.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The special refs listed in 'gitrevisions' (under the '<refname>' entry)
are on separate lines in the Asciidoc source, but end up as a single
continuous paragraph in the rendered documentation (see e.g. [1]). In
following commits we will mention additional special refs, so to improve
legibility, use a description list such that every entry appears on its
own line. Since we are already in a description list, use ':::' as the
term delimiter.
In order for the new description list to be aligned with the description
under the '<refname>' entry, instead of being aligned with the last
entry of the "in the following rules" nested list, use the "ancestor
list continuation" syntax [2], i.e., leave an empty line before the
continuation '+'. Do the same for the paragraph following the new
description list ("Note that any...").
While at it, also use a continuation '+' before the "in the following
rules" list, for correctness. The parser seems not to care here, but
it's best to keep the sources correct.
[1] https://git-scm.com/docs/gitrevisions#Documentation/gitrevisions.txt-emltrefnamegtemegemmasterememheadsmasterememrefsheadsmasterem
[2] https://docs.asciidoctor.org/asciidoc/latest/lists/continuation/#ancestor-list-continuation
Suggested-by: Victoria Dye <vdye@github.com>
Based-on-patch-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
