* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable was added in 5f8b9fc (git-send-email: add a new
sendemail.cc configuration variable, 2008-04-27), but is not yet refered
to by the documentation.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When introducing --format-patch, its documentation was accidentally inserted
in the middle of documentation for --validate.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --compose is used, we can grab the From/Subject/In-Reply-To from the
edited summary, let it be so and don't ask the user silly questions.
The summary templates gets quite revamped, and includes the list of
patches subjects that are going to be sent with this batch.
When having a body full of empty lines, the summary isn't sent. Document
that in the git-send-email manpage fully.
Note: It doesn't deal with To/Cc/Bcc yet.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to review every patch (and fix various aspects of them, or
comment them) in an editor just before being sent. Combined to the fact
that git send-email can now process revision lists, this makes git
send-email and efficient way to review and send patches interactively.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filter out all the arguments git-send-email doesn't like to a
git format-patch command, that dumps its content to a safe directory.
Barf when a file/revision conflict occurs, allow it to be overriden
--[no-]format-patch.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation now mentions sendemail.signedoffbycc instead
of sendemail.signedoffcc in order to match with the options
--signed-off-by-cc; the code has been updated to reflect this
as well, but sendemail.signedoffcc is still handled.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The options are partitioned into more digestible groups.
Within these groups, the options are sorted alphabetically.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The config variables are mentioned within the descriptions of the
command line options with which they are associated.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is also now a configuration variable:
sendemail[.<identity>].validate
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now the man page lists the options in alphabetical
order (in terms of the 'main' part of an option's
name).
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Specifically, boolean options are now listed in the form
--[no-]option
and both forms of documentation now consistently use
--[no-]signed-off-by-cc
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL,
which avoids Net::SMTP::TLS and its weird error checking. This trick
is due to Brian Evins.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add sendemail.smtpserverport to the Configuration section
of the git-send-email manpage. It should probably be
referenced in the --smtp-server-port option as well.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few options to git-send-email to suppress the automatic
generation of 'Cc' fields: --suppress-from, and --signed-off-cc.
However, there are other times that git-send-email automatically
includes Cc'd recipients. This is not desirable for all development
environments.
Add a new option --suppress-cc, which can be specified one or more
times to list the categories of auto-cc fields that should be
suppressed. If not specified, it defaults to values to give the same
behavior as specified by --suppress-from, and --signed-off-cc. The
categories are:
self - patch sender. Same as --suppress-from.
author - patch author.
cc - cc lines mentioned in the patch.
cccmd - avoid running the cccmd.
sob - signed off by lines.
all - all non-explicit recipients
Signed-off-by: David Brown <git@davidb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whilst convenient, it is most unwise to record passwords
in any place but one's brain. Moreover, it is especially
foolish to store them in configuration files, even with
access permissions set accordingly.
git-send-email has been amended, so that if it detects
an smtp username without a password, it promptly prompts
for the password and masks the input for privacy.
Furthermore, the argument to --smtp-pass has been rendered
optional.
The documentation has been updated to reflect these changes.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While there is information about this in the configuration section, it was
missing in the options section.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to receive patches via a given email address.
In these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use --smtp-server-port option to specify a port
different from the default (typically, SMTP servers listen
to smtp port 25 and ssmtp port 465).
Users should be aware that sending auth info over non-ssl
connections may be unsafe or just may not work at all
depending on SMTP server config.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows an arbitrary "cmd" to generate per patch
file specific "Cc:"s.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes git-send-email's behavior easier to modify by adding config
equivalents for two more of git-send-email's flags.
The mapping of flag to config setting is:
--[no-]supress-from => sendemail.suppressfrom
--[no-]signed-off-cc => sendemail.signedoffcc
It renames the --threaded option to --thread/--no-thread; the
config variable is also called sendemail.thread.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be either hostname/address, or a full path to a
local executable.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Catch the documentation up with the rest of this patchset.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
