The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"promisor-remote.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of files were apparently including cache.h solely to get
gettext.h. By making those files explicitly include gettext.h, we can
already drop the include of cache.h in these files. On top of that,
there were some files using cache.h that didn't need to for any reason.
Remove these unnecessary includes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
The "new_pack" we allocate in check_connected() wasn't being
free'd. Let's do that before we return from the function. This has
leaked ever since "new_pack" was added to this function in
c6807a40dc (clone: open a shortcut for connectivity check,
2013-05-26).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When serving a push, git-receive-pack(1) needs to verify that the
packfile sent by the client contains all objects that are required by
the updated references. This connectivity check works by marking all
preexisting references as uninteresting and using the new reference tips
as starting point for a graph walk.
Marking all preexisting references as uninteresting can be a problem
when it comes to performance. Git forges tend to do internal bookkeeping
to keep alive sets of objects for internal use or make them easy to find
via certain references. These references are typically hidden away from
the user so that they are neither advertised nor writeable. At GitLab,
we have one particular repository that contains a total of 7 million
references, of which 6.8 million are indeed internal references. With
the current connectivity check we are forced to load all these
references in order to mark them as uninteresting, and this alone takes
around 15 seconds to compute.
We can optimize this by only taking into account the set of visible refs
when marking objects as uninteresting. This means that we may now walk
more objects until we hit any object that is marked as uninteresting.
But it is rather unlikely that clients send objects that make large
parts of objects reachable that have previously only ever been hidden,
whereas the common case is to push incremental changes that build on top
of the visible object graph.
This provides a huge boost to performance in the mentioned repository,
where the vast majority of its refs hidden. Pushing a new commit into
this repo with `transfer.hideRefs` set up to hide 6.8 million of 7 refs
as it is configured in Gitaly leads to a 4.5-fold speedup:
Benchmark 1: main
Time (mean ± σ): 30.977 s ± 0.157 s [User: 30.226 s, System: 1.083 s]
Range (min … max): 30.796 s … 31.071 s 3 runs
Benchmark 2: pks-connectivity-check-hide-refs
Time (mean ± σ): 6.799 s ± 0.063 s [User: 6.803 s, System: 0.354 s]
Range (min … max): 6.729 s … 6.850 s 3 runs
Summary
'pks-connectivity-check-hide-refs' ran
4.56 ± 0.05 times faster than 'main'
As we mostly go through the same codepaths even in the case where there
are no hidden refs at all compared to the code before there is no change
in performance when no refs are hidden:
Benchmark 1: main
Time (mean ± σ): 48.188 s ± 0.432 s [User: 49.326 s, System: 5.009 s]
Range (min … max): 47.706 s … 48.539 s 3 runs
Benchmark 2: pks-connectivity-check-hide-refs
Time (mean ± σ): 48.027 s ± 0.500 s [User: 48.934 s, System: 5.025 s]
Range (min … max): 47.504 s … 48.500 s 3 runs
Summary
'pks-connectivity-check-hide-refs' ran
1.00 ± 0.01 times faster than 'main'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "env" member from "struct child_process" in favor of always
using the "env_array". As with the preceding removal of "argv" in
favor of "args" this gets rid of current and future oddities around
memory management at the API boundary (see the amended API docs).
For some of the conversions we can replace patterns like:
child.env = env->v;
With:
strvec_pushv(&child.env_array, env->v);
But for others we need to guard the strvec_pushv() with a NULL check,
since we're not passing in the "v" member of a "struct strvec",
e.g. in the case of tmp_objdir_env()'s return value.
Ideally we'd rename the "env_array" member to simply "env" as a
follow-up, since it and "args" are now inconsistent in not having an
"_array" suffix, and seemingly without any good reason, unless we look
at the history of how they came to be.
But as we've currently got 122 in-tree hits for a "git grep env_array"
let's leave that for now (and possibly forever). Doing that rename
would be too disruptive.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f45022dc2f,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
Optimize code that handles large number of refs in the "git fetch"
code path.
* ps/fetch-optim:
fetch: avoid second connectivity check if we already have all objects
fetch: merge fetching and consuming refs
fetch: refactor fetch refs to be more extendable
fetch-pack: optimize loading of refs via commit graph
connected: refactor iterator to return next object ID directly
fetch: avoid unpacking headers in object existence check
fetch: speed up lookup of want refs via commit-graph
The object ID iterator used by the connectivity checks returns the next
object ID via an out-parameter and then uses a return code to indicate
whether an item was found. This is a bit roundabout: instead of a
separate error code, we can just return the next object ID directly and
use `NULL` pointers as indicator that the iterator got no items left.
Furthermore, this avoids a copy of the object ID.
Refactor the iterator and all its implementations to return object IDs
directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs:
Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch
Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s]
Range (min … max): 29.934 s … 30.406 s 10 runs
Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch
Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s]
Range (min … max): 29.696 s … 29.996 s 10 runs
Summary
'328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran
1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch'
While this 1% speedup could be labelled as statistically insignificant,
the speedup is consistent on my machine. Furthermore, this is an end to
end test, so it is expected that the improvement in the connectivity
check itself is more significant.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to compute whether objects reachable from a set of tips are all
connected, we do a revision walk with these tips as positive references
and `--not --all`. `--not --all` will cause the revision walk to load
all preexisting references as uninteresting, which can be very expensive
in repositories with many references.
Benchmarking the git-rev-list(1) command highlights that by far the most
expensive single phase is initial sorting of the input revisions: after
all references have been loaded, we first sort commits by author date.
In a real-world repository with about 2.2 million references, it makes
up about 40% of the total runtime of git-rev-list(1).
Ultimately, the connectivity check shouldn't really bother about the
order of input revisions at all. We only care whether we can actually
walk all objects until we hit the cut-off point. So sorting the input is
a complete waste of time.
Introduce a new "--unsorted-input" flag to git-rev-list(1) which will
cause it to not sort the commits and adjust the connectivity check to
always pass the flag. This results in the following speedups, executed
in a clone of gitlab-org/gitlab [1]:
Benchmark #1: git rev-list --objects --quiet --not --all --not $(cat newrev)
Time (mean ± σ): 7.639 s ± 0.065 s [User: 7.304 s, System: 0.335 s]
Range (min … max): 7.543 s … 7.742 s 10 runs
Benchmark #2: git rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.995 s ± 0.044 s [User: 4.657 s, System: 0.337 s]
Range (min … max): 4.909 s … 5.048 s 10 runs
Summary
'git rev-list --unsorted-input --objects --quiet --not --all --not $(cat newrev)' ran
1.53 ± 0.02 times faster than 'git rev-list --objects --quiet --not --all --not $newrev'
[1]: https://gitlab.com/gitlab-org/gitlab.git. Note that not all refs
are visible to clients.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use more buffered I/O where we used to call many small write(2)s.
* rs/more-buffered-io:
upload-pack: use buffered I/O to talk to rev-list
midx: use buffered I/O to talk to pack-objects
connected: use buffered I/O to talk to rev-list
Like f0bca72dc7 (send-pack: use buffered I/O to talk to pack-objects,
2016-06-08), significantly reduce the number of system calls and
simplify the code for sending object IDs to rev-list by using stdio's
buffering.
Take care to handle errors immediately to get the correct error code,
and to flush the buffer explicitly before closing the stream in order to
catch any write errors for these last bytes.
Helped-by: Chris Torek <chris.torek@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a fetch results in a packfile being downloaded, a .keep file is
generated, so that the packfile can be preserved (from, say, a running
"git repack") until refs are written referring to the contents of the
packfile.
In a subsequent patch, a successful fetch using protocol v2 may result
in more than one .keep file being generated. Therefore, teach
fetch_pack() and the transport mechanism to support multiple .keep
files.
Implementation notes:
- builtin/fetch-pack.c normally does not generate .keep files, and thus
is unaffected by this or future changes. However, it has an
undocumented "--lock-pack" feature, used by remote-curl.c when
implementing the "fetch" remote helper command. In keeping with the
remote helper protocol, only one "lock" line will ever be written;
the rest will result in warnings to stderr. However, in practice,
warnings will never be written because the remote-curl.c "fetch" is
only used for protocol v0/v1 (which will not generate multiple .keep
files). (Protocol v2 uses the "stateless-connect" command, not the
"fetch" command.)
- connected.c has an optimization in that connectivity checks on a ref
need not be done if the target object is in a pack known to be
self-contained and connected. If there are multiple packfiles, this
optimization can no longer be done.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the commit ancestry connectedness check in a partial clone
repository in which "promised" objects are assumed to be obtainable
lazily on-demand from promisor remote repositories.
* jt/connectivity-check-optim-in-partial-clone:
connected: always use partial clone optimization
With 50033772d5 ("connected: verify promisor-ness of partial clone",
2020-01-30), the fast path (checking promisor packs) in
check_connected() now passes a subset of the slow path (rev-list) - if
all objects to be checked are found in promisor packs, both the fast
path and the slow path will pass; otherwise, the fast path will
definitely not pass. This means that we can always attempt the fast path
whenever we need to do the slow path.
The fast path is currently guarded by a flag; therefore, remove that
flag. Also, make the fast path fallback to the slow path - if the fast
path fails, the failing OID and all remaining OIDs will be passed to
rev-list.
The main user-visible benefit is the performance of fetch from a partial
clone - specifically, the speedup of the connectivity check done before
the fetch. In particular, a no-op fetch into a partial clone on my
computer was sped up from 7 seconds to 0.01 seconds. This is a
complement to the work in 2df1aa239c ("fetch: forgo full
connectivity check if --filter", 2020-01-30), which is the child of the
aforementioned 50033772d5. In that commit, the connectivity check
*after* the fetch was sped up.
The addition of the fast path might cause performance reductions in
these cases:
- If a partial clone or a fetch into a partial clone fails, Git will
fruitlessly run rev-list (it is expected that everything fetched
would go into promisor packs, so if that didn't happen, it is most
likely that rev-list will fail too).
- Any connectivity checks done by receive-pack, in the (in my opinion,
unlikely) event that a partial clone serves receive-pack.
I think that these cases are rare enough, and the performance reduction
in this case minor enough (additional object DB access), that the
benefit of avoiding a flag outweighs these.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While updating the microsoft/git fork on top of v2.26.0-rc0 and
consuming that build into Scalar, I noticed a corner case bug around
partial clone.
The "scalar clone" command can create a Git repository with the
proper config for using partial clone with the "blob:none" filter.
Instead of calling "git clone", it runs "git init" then sets a few
more config values before running "git fetch".
In our builds on v2.26.0-rc0, we noticed that our "git fetch"
command was failing with
error: https://github.com/microsoft/scalar did not send all necessary objects
This does not happen if you copy the config file from a repository
created by "git clone --filter=blob:none <url>", but it does happen
when adding the config option "core.logAllRefUpdates = true".
By debugging, I was able to see that the loop inside
check_connnected() that checks if all refs are contained in
promisor packs actually did not have any packfiles in the packed_git
list.
I'm not sure what corner-case issues caused this config option to
prevent the reprepare_packed_git() from being called at the proper
spot during the fetch operation. This approach requires a situation
where we use the remote helper process, which makes it difficult to
test.
It is possible to place a reprepare_packed_git() call in the fetch code
closer to where we receive a pack, but that leaves an opening for a
later change to re-introduce this problem. Further, a concurrent repack
operation could replace the pack-file list we already loaded into
memory, causing this issue in an even harder to reproduce scenario.
It is really the responsibility of anyone looping through the list of
pack-files for a certain object to fall back to reprepare_packed_git()
on a fail-to-find. The loop in check_connected() does not have this
fallback, leading to this bug.
We _could_ try looping through the packs and only reprepare the packs
after a miss, but that change is more involved and has little value.
Since this case is isolated to the case when
opt->check_refs_are_promisor_objects_only is true, we are confident that
we are verifying the refs after downloading new data. This implies that
calling reprepare_packed_git() in advance is not a huge cost compared to
the rest of the operations already made.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dfa33a298d ("clone: do faster object check for partial clones",
2019-04-21) optimized the connectivity check done when cloning with
--filter to check only the existence of objects directly pointed to by
refs. But this is not sufficient: they also need to be promisor objects.
Make this check more robust by instead checking that these objects are
promisor objects, that is, they appear in a promisor pack.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6462d5eb9a ("fetch: remove fetch_if_missing=0", 2019-11-08)
strove to remove the need for fetch_if_missing=0 from the fetching
mechanism, so it is plausible to attempt removing fetch_if_missing=0
from clone as well. But doing so reveals a bug - when the server does
not send an object directly pointed to by a ref, this should be an
error, not a trigger for a lazy fetch. (This case in the fetching
mechanism was covered by a test using "git clone", not "git fetch",
which is why the aforementioned commit didn't uncover the bug.)
The bug can be fixed by suppressing lazy-fetching during the
connectivity check. Fix this bug, and remove fetch_if_missing from
clone.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Switch various uses of GIT_SHA1_HEXSZ to reference the_hash_algo
instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a remote ref update to sha1 "X", we want to check that
we have all of the objects needed by "X". We can assume that our
repository is not currently corrupted, and therefore if we have a ref
pointing at "Y", we have all of its objects. So we can stop our
traversal from "X" as soon as we hit "Y".
If we make the same non-corruption assumption about any repositories we
use to store alternates, then we can also use their ref tips to shorten
the traversal.
This is especially useful when cloning with "--reference", as we
otherwise do not have any local refs to check against, and have to
traverse the whole history, even though the other side may have sent us
few or no objects. Here are results for the included perf test (which
shows off more or less the maximal savings, getting one new commit and
sharing the whole history):
Test HEAD^ HEAD
--------------------------------------------------------------------
[on git.git]
5600.3: clone --reference 2.94(2.86+0.08) 0.09(0.08+0.01) -96.9%
[on linux.git]
5600.3: clone --reference 45.74(45.34+0.41) 0.36(0.30+0.08) -99.2%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For partial clones, doing a full connectivity check is wasteful; we skip
promisor objects (which, for a partial clone, is all known objects), and
enumerating them all to exclude them from the connectivity check can
take a significant amount of time on large repos.
At most, we want to make sure that we get the objects referred to by any
wanted refs. For partial clones, just check that these objects were
transferred.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
Teach fetch to support filters. This is only allowed for the remote
configured in extensions.partialcloneremote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert check_connected and the callbacks it takes to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets callers influence the environment seen by
rev-list, which will be useful when we start providing
quarantined objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Connectivity checks have to traverse the entire object graph
in the worst case (e.g., a full clone or a full push). For
large repositories like linux.git, this can take 30-60
seconds, during which time git may produce little or no
output.
Let's add the option of showing progress, which is taken
care of by rev-list.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless the "quiet" flag is given, check_connected sends any
errors to the stderr of the caller (because the child
rev-list inherits that descriptor). However, server-side
callers may want to send these over a sideband channel
instead. Let's make that possible.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number of variants of check_everything_connected has
grown over the years, so that the "real" function takes
several possibly-zero, possibly-NULL arguments. We hid the
complexity behind some wrapper functions, but this doesn't
scale well when we want to add new options.
If we add more wrapper variants to handle the new options,
then we can get a combinatorial explosion when those options
might be used together (right now nobody wants to use both
"shallow" and "transport" together, so we get by with just a
few wrappers).
If instead we add new parameters to each function, each of
which can have a default value, then callers who want the
defaults end up with confusing invocations like:
check_everything_connected(fn, 0, data, -1, 0, NULL);
where it is unclear which parameter is which (and every
caller needs updated when we add new options).
Instead, let's add a struct to hold all of the optional
parameters. This is a little more verbose for the callers
(who have to declare the struct and fill it in), but it
makes their code much easier to follow, because every option
is named as it is set (and unused options do not have to be
mentioned at all).
Note that we could also stick the iteration function and its
callback data into the option struct, too. But since those
are required for each call, by avoiding doing so, we can let
very simple callers just pass "NULL" for the options and not
worry about the struct at all.
While we're touching each site, let's also rename the
function to check_connected(). The existing name was quite
long, and not all of the wrappers even used the full name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the magic "9" array-size which we must avoid
overflowing, making further patches simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check_everything_connected function takes a "quiet"
parameter which does two things if non-zero:
1. redirect rev-list's stderr to /dev/null to avoid
showing errors to the user
2. pass "--quiet" to rev-list
Item (1) is obviously useful. But item (2) is
surprisingly not. For rev-list, "--quiet" does not have
anything to do with chattiness on stderr; it tells rev-list
not to bother writing the list of traversed objects to
stdout, for efficiency. And since we always redirect
rev-list's stdout to /dev/null in this function, there is no
point in asking it to ever write anything to stdout.
The efficiency gains are modest; a best-of-five run of "git
rev-list --objects --all" on linux.git dropped from 32.013s
to 30.502s when adding "--quiet". That's only about 5%, but
given how easy it is, it's worth doing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stripping a suffix like:
if (ends_with(str, "foo"))
buf = xmemdupz(str, strlen(str) - 3);
we can instead use strip_suffix to avoid the constant 3,
which must match the literal "foo" (we sometimes use
strlen("foo") instead, but that means we are repeating
ourselves). The example above becomes:
if (strip_suffix(str, "foo", &len))
buf = xmemdupz(str, len);
This also saves a strlen(), since we calculate the string
length when detecting the suffix.
Note that in some cases we also switch from xstrndup to
xmemdupz, which saves a further strlen call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
