The t1300 test suite exercises the git-config(1) tool. To do so, the
test overwrites ".git/config" to contain custom contents in several
places with code like the following:
```
cat > .git/config <<\EOF
...
EOF
```
While this is easy enough to do, it may create problems when using a
non-default repository format because this causes us to overwrite the
repository format version as well as any potential extensions. With the
upcoming "reftable" ref backend the result is that Git would try to
access refs via the "files" backend even though the repository has been
initialized with the "reftable" backend, which will cause failures when
trying to access any refs.
Ideally, we would rewrite the whole test suite to not depend on state
written by previous tests, but that would result in a lot of changes in
this test suite. Instead, we only refactor tests which access the refdb
to be more robust by using their own separate repositories, which allows
us to be more careful and not discard required extensions.
Note that we also have to touch up how the CUSTOM_CONFIG_FILE gets
accessed. This environment variable contains the relative path to a
custom config file which we're setting up. But because we are now using
subrepositories, this relative path will not be found anymore because
our working directory changes. This issue is addressed by storing the
absolute path to the file in CUSTOM_CONFIG_FILE instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass config_context when parsing CLI config. To provide the .kvi member,
refactor out kvi_from_param() from the logic that caches CLI config in
configsets. Now that config_context and config_context.kvi is always
present when config machinery calls config callbacks, plumb "kvi" so
that we can remove all calls of current_config_scope() except for
trace2/*.c (which will be handled in a later commit), and remove all
other current_config_*() (the functions themselves and their calls).
Note that this results in .kvi containing a different, more complete
set of information than the mocked up "struct config_source" in
git_config_from_parameters().
Plumbing "kvi" reveals a few places where we've been doing the wrong
thing:
* git_config_parse_parameter() hasn't been setting config source
information, so plumb "kvi" there too.
* Several sites in builtin/config.c have been calling current_config_*()
functions outside of config callbacks (indirectly, via the
format_config() helper), which means they're reading state that isn't
set correctly:
* "git config --get-urlmatch --show-scope" iterates config to collect
values, but then attempts to display the scope after config
iteration, causing the "unknown" scope to be shown instead of the
config file's scope. It's clear that this wasn't intended: we knew
that "--get-urlmatch" couldn't show config source metadata, which is
why "--show-origin" was marked incompatible with "--get-urlmatch"
when it was introduced [1]. It was most likely a mistake that we
allowed "--show-scope" to sneak through.
Fix this by copying the "kvi" value in the collection phase so that
it can be read back later. This means that we can now support "git
config --get-urlmatch --show-origin", but that is left unchanged
for now.
* "git config --default" doesn't have config source metadata when
displaying the default value, so "--show-scope" also results in
"unknown", and "--show-origin" results in a BUG(). Fix this by
treating the default value as if it came from the command line (e.g.
like we do with "git -c" or "git config --file"), using
kvi_from_param().
[1] https://lore.kernel.org/git/20160205112001.GA13397@sigill.intra.peff.net/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test updates.
* ar/config-count-tests-updates:
t1300: add tests for missing keys
t1300: check stderr for "ignores pairs" tests
t1300: drop duplicate test
Three tests in t1300-config.sh check that "git config --get" barfs when
syntax errors are present in the config file. The tests redirect
standard output and standard error of "git config --get" to files,
"actual" and "error" correspondingly. They assert presence of an error
message in file "error". However, these tests don't use file "actual"
for assertions.
Don't redirect standard output of "git config --get" to file "actual" in
t1300-config.sh to avoid creating unnecessary files.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests in t1300-config.sh check that "git config --get" barfs when
the config file contains various syntax errors: key=value pair without
equals sign, broken section line, and broken value string. The sample
config files include a comment describing the kind of broken syntax.
This description seems to have been copy-pasted from the "broken section
line" sample to the other two samples.
Fix descriptions of broken config file syntax in samples used in
t1300-config.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several tests in t1300-config.sh that validate failing
invocations of "git config". However, there are no tests that check
what happens when "git config" is asked to retrieve a value for a
missing key.
Add tests that check this for various combinations of "<section>.<key>"
and "<section>.<subsection>.<key>".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests "git config ignores pairs ..." in t1300-config.sh validate that
"git config" ignores various kinds of supplied pairs of environment
variables GIT_CONFIG_KEY_* GIT_CONFIG_VALUE_* depending on
GIT_CONFIG_COUNT. By "ignores" here we mean that "git config" abides by
the value of environment variable GIT_CONFIG_COUNT and doesn't use
key-value pairs outside of the supplied GIT_CONFIG_COUNT when trying to
produce a value for config key "pair.one".
These tests also validate that "git config" doesn't complain about
mismatched environment variables to standard error. This is validated
by redirecting the standard error to a file called "error" and asserting
that it is empty. However, two of these tests incorrectly redirect to
standard output while calling the file "error", and test 'git config
ignores pairs exceeding count' doesn't validate standard error at all.
Fix these tests by redirecting standard error to file "error" and
asserting its emptiness.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two almost identical tests called 'git config ignores pairs
with zero count' in file t1300-config.sh. Drop the first of these and
keep the one that contains more assertions.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.38: (32 commits)
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
...
* maint-2.36: (30 commits)
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
...
* maint-2.35: (29 commits)
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
...
* maint-2.34: (28 commits)
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
...
* maint-2.31: (25 commits)
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
...
* maint-2.30: (23 commits)
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
github-actions: run gcc-8 on ubuntu-20.04 image
...
As a defense-in-depth measure to guard against any potentially-unknown
buffer overflows in `copy_or_rename_section_in_file()`, refuse to work
with overly-long lines in a gitconfig.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
When renaming (or deleting) a section of configuration, Git uses the
function `git_config_copy_or_rename_section_in_file()` to rewrite the
configuration file after applying the rename or deletion to the given
section.
To do this, Git repeatedly calls `fgets()` to read the existing
configuration data into a fixed size buffer.
When the configuration value under `old_name` exceeds the size of the
buffer, we will call `fgets()` an additional time even if there is no
newline in the configuration file, since our read length is capped at
`sizeof(buf)`.
If the first character of the buffer (after zero or more characters
satisfying `isspace()`) is a '[', Git will incorrectly treat it as
beginning a new section when the original section is being removed. In
other words, a configuration value satisfying this criteria can
incorrectly be considered as a new secftion instead of a variable in the
original section.
Avoid this issue by using a variable-width buffer in the form of a
strbuf rather than a fixed-with region on the stack. A couple of small
points worth noting:
- Using a strbuf will cause us to allocate arbitrary sizes to match
the length of each line. In practice, we don't expect any
reasonable configuration files to have lines that long, and a
bandaid will be introduced in a later patch to ensure that this is
the case.
- We are using strbuf_getwholeline() here instead of strbuf_getline()
in order to match `fgets()`'s behavior of leaving the trailing LF
character on the buffer (as well as a trailing NUL).
This could be changed later, but using strbuf_getwholeline() changes
the least about this function's implementation, so it is picked as
the safest path.
- It is temping to want to replace the loop to skip over characters
matching isspace() at the beginning of the buffer with a convenience
function like `strbuf_ltrim()`. But this is the wrong approach for a
couple of reasons:
First, it involves a potentially large and expensive `memmove()`
which we would like to avoid. Second, and more importantly, we also
*do* want to preserve those spaces to avoid changing the output of
other sections.
In all, this patch is a minimal replacement of the fixed-width buffer in
`git_config_copy_or_rename_section_in_file()` to instead use a `struct
strbuf`.
Reported-by: André Baptista <andre@ethiack.com>
Reported-by: Vítor Pinho <vitor@ethiack.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When renaming a configuration section which has an entry whose length
exceeds the size of our buffer in config.c's implementation of
`git_config_copy_or_rename_section_in_file()`, Git will incorrectly
form a new configuration section with part of the data in the section
being removed.
In this instance, our first configuration file looks something like:
[b]
c = d <spaces> [a] e = f
[a]
g = h
Here, we have two configuration values, "b.c", and "a.g". The value "[a]
e = f" belongs to the configuration value "b.c", and does not form its
own section.
However, when renaming the section 'a' to 'xyz', Git will write back
"[xyz]\ne = f", but "[xyz]" is still attached to the value of "b.c",
which is why "e = f" on its own line becomes a new entry called "b.e".
A slightly different example embeds the section being renamed within
another section.
Demonstrate this failure in a test in t1300, which we will fix in the
following commit.
Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
If the input to strtoimax() or strtoumax() does not contain any digits
then they return zero and set `end` to point to the start of the input
string. git_parse_[un]signed() do not check `end` and so fail to return
an error and instead return a value of zero if the input string is a
valid units factor without any digits (e.g "k").
Tests are added to check that 'git config --int' and OPT_MAGNITUDE()
reject a units specifier without a leading digit.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The "test_when_finished" cleanup phase added in 4179b4897f (config:
allow overriding of global and system configuration, 2021-04-19) has
never worked as intended, firstly the ".config/git" is a directory, so
we'd need the "-r" flag, but more importantly the $HOME variable
wasn't properly quoted.
We'd thus end up trying to remove the "trash" part of "trash
directory", which wouldn't fail with "-f", since "rm -f" won't fail on
non-existing files.
It's possible that this would have caused an actual failure if someone
had a $HOME with a space character in it, such that our "rm -f" would
fail to remove an existing directory, but in practice that probably
never happened.
Let's fix both the quoting issue, and the other issue cleanup issue in
4179b4897f, which is that we were attempting to clean up
~/.config/git, but weren't cleaing up ~/.gitconfig.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that "git config --show-scope" shows the "worktree" scope, and add
it to the list of scopes in Documentation/git-config.txt.
"git config --help" does not need to be updated because it already
mentions "worktree".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
This is a feature that supports config file inclusion conditional on
whether the repo has a remote with a URL that matches a glob.
Similar to my previous work on remote-suggested hooks [1], the main
motivation is to allow remote repo administrators to provide recommended
configs in a way that can be consumed more easily (e.g. through a
package installable by a package manager - it could, for example,
contain a file to be included conditionally and a post-install script
that adds the include directive to the system-wide config file).
In order to do this, Git reruns the config parsing mechanism upon
noticing the first URL-conditional include in order to find all remote
URLs, and these remote URLs are then used to determine if that first and
all subsequent includes are executed. Remote URLs are not allowed to be
configued in any URL-conditionally-included file.
[1] https://lore.kernel.org/git/cover.1623881977.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in `{...}` groups in order to reduce the number of
possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in compound statements in order to reduce the
number of possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*config*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace GIT_CONFIG_NOSYSTEM mechanism to decline from reading the
system-wide configuration file with GIT_CONFIG_SYSTEM that lets
users specify from which file to read the system-wide configuration
(setting it to an empty file would essentially be the same as
setting NOSYSTEM), and introduce GIT_CONFIG_GLOBAL to override the
per-user configuration in $HOME/.gitconfig.
* ps/config-global-override:
t1300: fix unset of GIT_CONFIG_NOSYSTEM leaking into subsequent tests
config: allow overriding of global and system configuration
config: unify code paths to get global config paths
config: rename `git_etc_config()`
"git --config-env var=val cmd" weren't accepted (only
--config-env=var=val was).
* ps/config-env-option-with-separate-value:
git: support separate arg for `--config-env`'s value
git.txt: fix synopsis of `--config-env` missing the equals sign
While not documented as such, many of the top-level options like
`--git-dir` and `--work-tree` support two syntaxes: they accept both an
equals sign between option and its value, and they do support option and
value as two separate arguments. The recently added `--config-env`
option only supports the syntax with an equals sign.
Mitigate this inconsistency by accepting both syntaxes and add tests to
verify both work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to test whether the new GIT_CONFIG_SYSTEM environment variable
behaves as expected, we unset GIT_CONFIG_NOSYSTEM in one of our tests in
t1300. But because tests are not executed in a subshell, this unset
leaks into all subsequent tests and may thus cause them to fail in some
environments. These failures are easily reproducable with `make
prefix=/root test`.
Fix the issue by not using `sane_unset GIT_CONFIG_NOSYSTEM`, but instead
just manually add it to the environment of the two command invocations
which need it.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to have git run in a fully controlled environment without any
misconfiguration, it may be desirable for users or scripts to override
global- and system-level configuration files. We already have a way of
doing this, which is to unset both HOME and XDG_CONFIG_HOME environment
variables and to set `GIT_CONFIG_NOGLOBAL=true`. This is quite kludgy,
and unsetting the first two variables likely has an impact on other
executables spawned by such a script.
The obvious way to fix this would be to introduce `GIT_CONFIG_NOGLOBAL`
as an equivalent to `GIT_CONFIG_NOSYSTEM`. But in the past, it has
turned out that this design is inflexible: we cannot test system-level
parsing of the git configuration in our test harness because there is no
way to change its location, so all tests run with `GIT_CONFIG_NOSYSTEM`
set.
Instead of doing the same mistake with `GIT_CONFIG_NOGLOBAL`, introduce
two new variables `GIT_CONFIG_GLOBAL` and `GIT_CONFIG_SYSTEM`:
- If unset, git continues to use the usual locations.
- If set to a specific path, we skip reading the normal
configuration files and instead take the path. By setting the path
to `/dev/null`, no configuration will be loaded for the respective
level.
This implements the usecase where we want to execute code in a sanitized
environment without any potential misconfigurations via `/dev/null`, but
is more flexible and allows for more usecases than simply adding
`GIT_CONFIG_NOGLOBAL`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message given when a configuration variable that is
expected to have a boolean value has been improved.
* ak/config-bad-bool-error:
config: improve error message for boolean config
Currently invalid boolean config values return messages about 'bad
numeric', which is slightly misleading when the error was due to a
boolean value. We can improve the developer experience by returning a
boolean error message when we know the value is neither a bool text or
int.
before with an invalid boolean value of `non-boolean`, its unclear what
numeric is referring to:
fatal: bad numeric config value 'non-boolean' for 'commit.gpgsign': invalid unit
now the error message mentions `non-boolean` is a bad boolean value:
fatal: bad boolean config value 'non-boolean' for 'commit.gpgsign'
Signed-off-by: Andrew Klotz <agc.klotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
While we currently have the `GIT_CONFIG_PARAMETERS` environment variable
which can be used to pass runtime configuration data to git processes,
it's an internal implementation detail and not supposed to be used by
end users.
Next to being for internal use only, this way of passing config entries
has a major downside: the config keys need to be parsed as they contain
both key and value in a single variable. As such, it is left to the user
to escape any potentially harmful characters in the value, which is
quite hard to do if values are controlled by a third party.
This commit thus adds a new way of adding config entries via the
environment which gets rid of this shortcoming. If the user passes the
`GIT_CONFIG_COUNT=$n` environment variable, Git will parse environment
variable pairs `GIT_CONFIG_KEY_$i` and `GIT_CONFIG_VALUE_$i` for each
`i` in `[0,n)`.
While the same can be achieved with `git -c <name>=<value>`, one may
wish to not do so for potentially sensitive information. E.g. if one
wants to set `http.extraHeader` to contain an authentication token,
doing so via `-c` would trivially leak those credentials via e.g. ps(1),
which typically also shows command arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added a new format for $GIT_CONFIG_PARAMETERS which
is able to robustly handle subsections with "=" in them. Let's start
writing the new format. Unfortunately, this does much less than you'd
hope, because "git -c" itself has the same ambiguity problem! But it's
still worth doing:
- we've now pushed the problem from the inter-process communication
into the "-c" command-line parser. This would free us up to later
add an unambiguous format there (e.g., separate arguments like "git
--config key value", etc).
- for --config-env, the parser already disallows "=" in the
environment variable name. So:
git --config-env section.with=equals.key=ENVVAR
will robustly set section.with=equals.key to the contents of
$ENVVAR.
The new test shows the improvement for --config-env.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we stuff config options into GIT_CONFIG_PARAMETERS, we shell-quote
each one as a single unit, like:
'section.one=value1' 'section.two=value2'
On the reading side, we de-quote to get the individual strings, and then
parse them by splitting on the first "=" we find. This format is
ambiguous, because an "=" may appear in a subsection. So the config
represented in a file by both:
[section "subsection=with=equals"]
key = value
and:
[section]
subsection = with=equals.key=value
ends up in this flattened format like:
'section.subsection=with=equals.key=value'
and we can't tell which was desired. We have traditionally resolved this
by taking the first "=" we see starting from the left, meaning that we
allowed arbitrary content in the value, but not in the subsection.
Let's make our environment format a bit more robust by separately
quoting the key and value. That turns those examples into:
'section.subsection=with=equals.key'='value'
and:
'section.subsection'='with=equals.key=value'
respectively, and we can tell the difference between them. We can detect
which format is in use for any given element of the list based on the
presence of the unquoted "=". That means we can continue to allow the
old format to work to support any callers which manually used the old
format, and we can even intermingle the two formats. The old format
wasn't documented, and nobody was supposed to be using it. But it's
likely that such callers exist in the wild, so it's nice if we can avoid
breaking them. Likewise, it may be possible to trigger an older version
of "git -c" that runs a script that calls into a newer version of "git
-c"; that new version would see the intermingled format.
This does create one complication, which is that the obvious format in
the new scheme for
[section]
some-bool
is:
'section.some-bool'
with no equals. We'd mistake that for an old-style variable. And it even
has the same meaning in the old style, but:
[section "with=equals"]
some-bool
does not. It would be:
'section.with=equals=some-bool'
which we'd take to mean:
[section]
with = equals=some-bool
in the old, ambiguous style. Likewise, we can't use:
'section.some-bool'=''
because that's ambiguous with an actual empty string. Instead, we'll
again use the shell-quoting to give us a hint, and use:
'section.some-bool'=
to show that we have no value.
Note that this commit just expands the reading side. We'll start writing
the new format via "git -c" in a future patch. In the meantime, the
existing "git -c" tests will make sure we didn't break reading the old
format. But we'll also add some explicit coverage of the two formats to
make sure we continue to handle the old one after we move the writing
side over.
And one final note: since we're now using the shell-quoting as a
semantically meaningful hint, this closes the door to us ever allowing
arbitrary shell quoting, like:
'a'shell'would'be'ok'with'this'.key=value
But we have never supported that (only what sq_quote() would produce),
and we are probably better off keeping things simple, robust, and
backwards-compatible, than trying to make it easier for humans. We'll
continue not to advertise the format of the variable to users, and
instead keep "git -c" as the recommended mechanism for setting config
(even if we are trying to be kind not to break users who may be relying
on the current undocumented format).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it's already possible to pass runtime configuration via `git -c
<key>=<value>`, it may be undesirable to use when the value contains
sensitive information. E.g. if one wants to set `http.extraHeader` to
contain an authentication token, doing so via `-c` would trivially leak
those credentials via e.g. ps(1), which typically also shows command
arguments.
To enable this usecase without leaking credentials, this commit
introduces a new switch `--config-env=<key>=<envvar>`. Instead of
directly passing a value for the given key, it instead allows the user
to specify the name of an environment variable. The value of that
variable will then be used as value of the key.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use various made-up config keys in the "core" section for no real
reason. Change them to work in the "section" section instead and be
careful to also change "cores" to "sections". Make sure to also catch
"Core", "CoReS" and similar.
There are a few instances that actually want to work with a real "core"
config such as `core.bare` or `core.editor`. After this, it's clearer
that they work with "core" for a reason.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test that we can handle `git config --file symlink` and the error
case of `git config --file symlink-to-missing-file`. For good measure,
we also throw in a test to check that we correctly handle referencing a
missing regular file. But we have such a test earlier in this script.
They both check that we fail to use `--file no-such-file --list`.
Drop the latter of these and keep the one that is in the general area
where we test `--file` and `GIT_CONFIG`. The one we're dropping also
checks that we can't even get a specific key from the missing file --
let's make sure we check that in the test we keep.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two tests for checking that we can handle `git config --file
../other-config ...`. One, using `--file`, was introduced in 65807ee697
("builtin-config: Fix crash when using "-f <relative path>" from
non-root dir", 2010-01-26), then another, using `GIT_CONFIG`, came about
in 270a34438b ("config: stop using config_exclusive_filename",
2012-02-16).
The latter of these was then converted to use `--file` in f7e8714101
("t: prefer "git config --file" to GIT_CONFIG", 2014-03-20). Both where
then simplified in a5db0b77b9 ("t1300: extract and use
test_cmp_config()", 2018-10-21).
These two tests differ slightly in the order of the options used, but
other than that, they are identical. Let's drop one. As noted in
f7e8714101, we do still have a test for `GIT_CONFIG` and it shares the
implementation with `--file`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config builtin does its own regex matching of values for the --get,
--get-all, and --get-regexp modes. Plumb the existing 'flags' parameter
to the get_value() method so we can initialize the value-pattern argument
as a fixed string instead of a regex pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config_set_multivar_in_file_gently() and related methods now
take a 'flags' bitfield, so add a new bit representing the --fixed-value
option from 'git config'. This alters the purpose of the value_pattern
parameter to be an exact string match. This requires some initialization
changes in git_config_set_multivar_in_file_gently() and a new strcmp()
call in the matches() method.
The new CONFIG_FLAGS_FIXED_VALUE flag is initialized in builtin/config.c
based on the --fixed-value option, and that needs to be updated in
several callers.
This patch only affects some of the modes of 'git config', and the rest
will be completed in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --replace-all option was added in 4ddba79d (git-config-set: add more
options) but was not tested along with the 'value-pattern' parameter.
Since we will be updating this option to optionally treat 'value-pattern'
as a fixed string, let's add a test here that documents the current
behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without additional modifiers, 'git config <key> <value>' attempts
to set a single value in the .git/config file. When the
value-pattern parameter is supplied, this command behaves in a
non-trivial manner.
Consider 'git config <key> <value> <value-pattern>'. The expected
behavior is as follows:
1. If there are multiple existing values that match 'value-pattern',
then the command fails. Users should use --replace-all instead.
2. If there is no existing values match 'value-pattern', then the
'key=value' pair is appended, making this 'key' a multi-valued
config setting.
3. If there is one existing value that matches 'value-pattern', then
the new config has one entry where 'key=value'.
Add a test that demonstrates these options. Break from the existing
pattern in t1300-config.sh to use 'git config --file=<file>' instead of
modifying .git/config directly to prevent possibly incompatible repo
states. Also use 'git config --file=<file> --list' for config state
comparison instead of the config file format. This makes the tests
more readable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
