When fetching from a remote repository we will by default write what has
been fetched into the special FETCH_HEAD reference. The order in which
references are written depends on whether the reference is for merge or
not, which, despite some other conditions, is also determined based on
whether the old object ID the reference is being updated from actually
exists in the repository.
To write FETCH_HEAD we thus loop through all references thrice: once for
the references that are about to be merged, once for the references that
are not for merge, and finally for all references that are ignored. For
every iteration, we then look up the old object ID to determine whether
the referenced object exists so that we can label it as "not-for-merge"
if it doesn't exist. It goes without saying that this can be expensive
in case where we are fetching a lot of references.
While this is hard to avoid in the case where we're writing FETCH_HEAD,
users can in fact ask us to skip this work via `--no-write-fetch-head`.
In that case, we do not care for the result of those lookups at all
because we don't have to order writes to FETCH_HEAD in the first place.
Skip this busywork in case we're not writing to FETCH_HEAD. The
following benchmark performs a mirror-fetch in a repository with about
two million references via `git fetch --prune --no-write-fetch-head
+refs/*:refs/*`:
Benchmark 1: HEAD~
Time (mean ± σ): 75.388 s ± 1.942 s [User: 71.103 s, System: 8.953 s]
Range (min … max): 73.184 s … 76.845 s 3 runs
Benchmark 2: HEAD
Time (mean ± σ): 69.486 s ± 1.016 s [User: 65.941 s, System: 8.806 s]
Range (min … max): 68.864 s … 70.659 s 3 runs
Summary
'HEAD' ran
1.08 ± 0.03 times faster than 'HEAD~'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/fetch-atomic:
fetch: make `--atomic` flag cover pruning of refs
fetch: make `--atomic` flag cover backfilling of tags
refs: add interface to iterate over queued transactional updates
fetch: report errors when backfilling tags fails
fetch: control lifecycle of FETCH_HEAD in a single place
fetch: backfill tags before setting upstream
fetch: increase test coverage of fetches
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
Unlike "git apply", "git patch-id" did not handle patches with
hunks that has only 1 line in either preimage or postimage, which
has been corrected.
* jz/patch-id-hunk-header-parsing-fix:
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
patch-id: fix antipatterns in tests
When fetching with the `--prune` flag we will delete any local
references matching the fetch refspec which have disappeared on the
remote. This step is not currently covered by the `--atomic` flag: we
delete branches even though updating of local references has failed,
which means that the fetch is not an all-or-nothing operation.
Fix this bug by passing in the global transaction into `prune_refs()`:
if one is given, then we'll only queue up deletions and not commit them
right away.
This change also improves performance when pruning many branches in a
repository with a big packed-refs file: every references is pruned in
its own transaction, which means that we potentially have to rewrite
the packed-refs files for every single reference we're about to prune.
The following benchmark demonstrates this: it performs a pruning fetch
from a repository with a single reference into a repository with 100k
references, which causes us to prune all but one reference. This is of
course a very artificial setup, but serves to demonstrate the impact of
only having to write the packed-refs file once:
Benchmark 1: git fetch --prune --atomic +refs/*:refs/* (HEAD~)
Time (mean ± σ): 2.366 s ± 0.021 s [User: 0.858 s, System: 1.508 s]
Range (min … max): 2.328 s … 2.407 s 10 runs
Benchmark 2: git fetch --prune --atomic +refs/*:refs/* (HEAD)
Time (mean ± σ): 1.369 s ± 0.017 s [User: 0.715 s, System: 0.641 s]
Range (min … max): 1.346 s … 1.400 s 10 runs
Summary
'git fetch --prune --atomic +refs/*:refs/* (HEAD)' ran
1.73 ± 0.03 times faster than 'git fetch --prune --atomic +refs/*:refs/* (HEAD~)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching references from a remote we by default also fetch all tags
which point into the history we have fetched. This is a separate step
performed after updating local references because it requires us to walk
over the history on the client-side to determine whether the remote has
announced any tags which point to one of the fetched commits.
This backfilling of tags isn't covered by the `--atomic` flag: right
now, it only applies to the step where we update our local references.
This is an oversight at the time the flag was introduced: its purpose is
to either update all references or none, but right now we happily update
local references even in the case where backfilling failed.
Fix this by pulling up creation of the reference transaction such that
we can pass the same transaction to both the code which updates local
references and to the code which backfills tags. This allows us to only
commit the transaction in case both actions succeed.
Note that we also have to start passing the transaction into
`find_non_local_tags()`: this function is responsible for finding all
tags which we need to backfill. Right now, it will happily return tags
which have already been updated with our local references. But when we
use a single transaction for both local references and backfilling then
it may happen that we try to queue the same reference update twice to
the transaction, which consequently triggers a bug. We thus have to skip
over any tags which have already been queued.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the backfilling of tags fails we do not report this error to the
caller, but only report it implicitly at a later point when reporting
updated references. This leaves callers unable to act upon the
information of whether the backfilling succeeded or not.
Refactor the function to return an error code and pass it up the
callstack. This causes us to correctly propagate the error back to the
user of git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different locations where we're appending to FETCH_HEAD:
first when storing updated references, and second when backfilling tags.
Both times we open the file, append to it and then commit it into place,
which is essentially duplicate work.
Improve the lifecycle of updating FETCH_HEAD by opening and committing
it once in `do_fetch()`, where we pass the structure down to the code
which wants to append to it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch code flow is a bit hard to understand right now:
1. We optionally prune all references which have vanished on the
remote side.
2. We fetch and update all other references locally.
3. We update the upstream branch in the gitconfig.
4. We backfill tags pointing into the history we have just fetched.
It is quite confusing that we fetch objects and update references in
both (2) and (4), which is further stressed by the point that we use a
`skip` goto label to jump from (3) to (4) in case we fail to update the
gitconfig as expected.
Reorder the code to first update all local references, and only after we
have done so update the upstream branch information. This improves the
code flow and furthermore makes it easier to refactor the way we update
references together.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
When "git fetch --prune" failed to prune the refs it wanted to
prune, the command issued error messages but exited with exit
status 0, which has been corrected.
* tg/fetch-prune-exit-code-fix:
fetch --prune: exit with error if pruning fails
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in codepaths that use the "struct
transport_ls_refs_options" API. Since the introduction of the struct
in 39835409d1 (connect, transport: encapsulate arg in struct,
2021-02-05) the caller has been responsible for freeing it.
That commit in turn migrated code originally added in
402c47d939 (clone: send ref-prefixes when using protocol v2,
2018-07-20) and b4be74105f (ls-remote: pass ref prefixes when
requesting a remote's refs, 2018-03-15). Only some of those codepaths
were releasing the allocated resources of the struct, now all of them
will.
Mark the "t/t5511-refspec.sh" test as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target). Previously 24/47 tests would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that happened when the --path option was
provided. This leak has been with us ever since the option was added
in 3970243150 (add --path option to git hash-object, 2008-08-03).
We can now mark "t1007-hash-object.sh" as passing when git is compiled
with SANITIZE=leak. It'll now run in the the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --refresh" has been taught to deal better with
racy timestamps (just like "git status" already does).
* ms/update-index-racy:
update-index: refresh should rewrite index in case of racy timestamps
t7508: add tests capturing racy timestamp handling
t7508: fix bogus mtime verification
test-lib: introduce API for verifying file mtime
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove mistaken right square brackets from "git-diff"
usage string. Make the usage string conform to "git-diff"
documentation (Documentation/git-diff.txt).
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally diffs will contain a hunk header of the format
"@@ -2,2 +2,15 @@ code". However when there is only 1 line of
change, the unified diff format allows for the second comma
separated value to be omitted in either before or after
line counts.
This can produce hunk headers that look like
"@@ -2 +2,18 @@ code" or "@@ -2,2 +2 @@ code".
As a result, scan_hunk_header mistakenly returns the line
number as line count, which then results in unpredictable
parsing errors with the rest of the patch, including giving
multiple lines of output for a single commit.
Fix by explicitly setting line count to 1 when there is
no comma, and add a test.
apply.c contains this same logic except it is correct. A
worthwhile future project might be to unify these two diff
parsers so they both benefit from fixes.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --remerge-diff option will need to create new blobs and trees
representing the "automatic merge" state. If one is traversing a
long project history, one can easily get hundreds of thousands of
loose objects generated during `log --remerge-diff`. However, none of
those loose objects are needed after we have completed our diff
operation; they can be summarily deleted.
Add a new helper function to tmp_objdir to discard all the contained
objects, and call it after each merge is handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is specified, we remerge all (two parent) merge commits
and diff the actual merge commit to the automatically created version,
in order to show how users removed conflict markers, resolved the
different conflict versions, and potentially added new changes outside
of conflict regions in order to resolve semantic merge problems (or,
possibly, just to hide other random changes).
This capability works by creating a temporary object directory and
marking it as the primary object store. This makes it so that any blobs
or trees created during the automatic merge are easily removable
afterwards by just deleting all objects from the temporary object
directory.
There are a few ways that this implementation is suboptimal:
* `log --remerge-diff` becomes slow, because the temporary object
directory can fill with many loose objects while running
* the log output can be muddied with misplaced "warning: cannot merge
binary files" messages, since ll-merge.c unconditionally writes those
messages to stderr while running instead of allowing callers to
manage them.
* important conflict and warning messages are simply dropped; thus for
conflicts like modify/delete or rename/rename or file/directory which
are not representable with content conflict markers, there may be no
way for a user of --remerge-diff to know that there had been a
conflict which was resolved (and which possibly motivated other
changes in the merge commit).
* when fixing the previous issue, note that some unimportant conflict
and warning messages might start being included. We should instead
make sure these remain dropped.
Subsequent commits will address these issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a hidden ref, e.g.:
$ git push origin HEAD:refs/hidden/foo
"receive-pack" will reject our request with an error message like this:
! [remote rejected] HEAD -> refs/hidden/foo (deny updating a hidden ref)
The remote side ("git-receive-pack") will not create the hidden ref as
expected, but the pack file sent by "git-send-pack" is left inside the
remote repository. I.e. the quarantine directory is not purged as it
should be.
Add a checkpoint before calling "tmp_objdir_migrate()" and after calling
the "pre-receive" hook to purge that temporary data in the quarantine
area when there is no command ready to run.
The reason we do not add the checkpoint before the "pre-receive" hook,
but after it, is that the "pre-receive" hook is called with a switch-off
"skip_broken" flag, and all commands, even broken ones, should be fed
by calling "feed_receive_hook()".
Add a new test case in t5516 as well.
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Helped-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Chen Bojun <bojun.cbj@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consolidate the logic for deciding when to create a new branch in
cmd_branch(), and save the result for reuse. Besides making the function
more explicit, this allows us to validate options that can only be used
when creating a branch. Such an option does not exist yet, but one will
be introduced in a subsequent commit.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dry_run parameter to create_branch() such that dry_run = 1 will
validate a new branch without trying to create it. This will be used in
`git branch --recurse-submodules` to ensure that the new branch can be
created in all submodules.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is preparation for a future commit that will simplify
create_branch() so that it always creates a branch. This will allow
create_branch() to accept a dry_run parameter (which is needed for "git
branch --recurse-submodules").
create_branch() used to always create a branch, but 4fc5006676 (Add
branch --set-upstream, 2010-01-18) changed it to also be able to set
tracking information without creating a branch.
Refactor the code that sets tracking information into its own functions
dwim_branch_start() and dwim_and_setup_tracking(). Also change an
invocation of create_branch() in cmd_branch() in builtin/branch.c to use
dwim_and_setup_tracking(), since that invocation is only for setting
tracking information (in "git branch --set-upstream-to").
As of this commit, create_branch() is no longer invoked in a way that
does not create branches.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pruning refs fails, we print an error to stderr, but still
exit 0 from 'git fetch'. Since this is a genuine error, fetch
should be exiting with some non-zero exit code. Make it so.
The --prune option was introduced in f360d844de ("builtin-fetch: add
--prune option", 2009-11-10). Unfortunately it's unclear from that
commit whether ignoring the exit code was an oversight or
intentional, but it feels like an oversight.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
The error message when invoking a negotiate-only fetch without providing
any tips incorrectly refers to a --negotiate-tip=* argument. Fix this to
use the actual argument, --negotiation-tip=*.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were introduced in commit 55dfcf9591 ("sparse-checkout: clear
tracked sparse dirs", 2021-09-08) and missed in my review at the time.
Plug the leaks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
