Running it as "git remote-ext" and letting "git" dispatch to
"remote-ext" would just be fine and is more idiomatic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
When trying to push all matching branches, but none match, we offer a
message suggesting to push the `master` branch.
However, we want to step away from making that branch any more special
than any other branch, so let's reword that message to mention no branch
in particular.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a fetch results in a packfile being downloaded, a .keep file is
generated, so that the packfile can be preserved (from, say, a running
"git repack") until refs are written referring to the contents of the
packfile.
In a subsequent patch, a successful fetch using protocol v2 may result
in more than one .keep file being generated. Therefore, teach
fetch_pack() and the transport mechanism to support multiple .keep
files.
Implementation notes:
- builtin/fetch-pack.c normally does not generate .keep files, and thus
is unaffected by this or future changes. However, it has an
undocumented "--lock-pack" feature, used by remote-curl.c when
implementing the "fetch" remote helper command. In keeping with the
remote helper protocol, only one "lock" line will ever be written;
the rest will result in warnings to stderr. However, in practice,
warnings will never be written because the remote-curl.c "fetch" is
only used for protocol v0/v1 (which will not generate multiple .keep
files). (Protocol v2 uses the "stateless-connect" command, not the
"fetch" command.)
- connected.c has an optimization in that connectivity checks on a ref
need not be done if the target object is in a pack known to be
self-contained and connected. If there are multiple packfiles, this
optimization can no longer be done.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the object-format extensions that let us determine the hash
algorithm in use when pushing or pulling data.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new method in transport-helper to reject all references if any
reference is failed for atomic push.
This method is reused in "send-pack.c" and "transport-helper.c", one for
SSH, git and file protocols, and the other for HTTP protocol.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit v2.22.0-1-g3bca1e7f9f (transport-helper: enforce atomic in
push_refs_with_push, 2019-07-11) noticed the incomplete report of
failure of an atomic push for HTTP protocol. But the implementation
has a flaw that mark all remote references as failure.
Only mark necessary references as failure in `push_refs_with_push()` of
transport-helper.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often skip an optional prefix in a string with a hardcoded
constant, e.g.
if (starts_with(string, "prefix"))
string += 6;
which is less error prone when written
skip_prefix(string, "prefix", &string);
Note that this changes a few error messages from "git reflog expire
--expire=nonsense.timestamp", which used to complain by saying
'--expire=nonsense.timestamp' is not a valid timestamp
but with this change, we say
'nonsense.timestamp' is not a valid timestamp
which is more technically correct (the string with --expire= as
a prefix obviously cannot be a valid timestamp, but the error is
about the part of the input without that prefix).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
This fixes CVE-2019-1348.
Signed-off-by: Jeff King <peff@peff.net>
The atomic push over smart HTTP transport did not work, which has
been corrected.
* bc/smart-http-atomic-push:
remote-curl: pass on atomic capability to remote side
When pushing more than one reference with the --atomic option, the
server is supposed to perform a single atomic transaction to update the
references, leaving them either all to succeed or all to fail. This
works fine when pushing locally or over SSH, but when pushing over HTTP,
we fail to pass the atomic capability to the remote side. In fact, we
have not reported this capability to any remote helpers during the life
of the feature.
Now normally, things happen to work nevertheless, since we actually
check for most types of failures, such as non-fast-forward updates, on
the client side, and just abort the entire attempt. However, if the
server side reports a problem, such as the inability to lock a ref, the
transaction isn't atomic, because we haven't passed the appropriate
capability over and the remote side has no way of knowing that we wanted
atomic behavior.
Fix this by passing the option from the transport code through to remote
helpers, and from the HTTP remote helper down to send-pack. With this
change, we can detect if the server side rejects the push and report
back appropriately. Note the difference in the messages: the remote
side reports "atomic transaction failed", while our own checking rejects
pushes with the message "atomic push failed".
Document the atomic option in the remote helper documentation, so other
implementers can implement it if they like.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http transport lacked some optimization the native transports
learned to avoid unnecessary ref advertisement, which has been
corrected.
* jt/avoid-ls-refs-with-http:
transport: teach all vtables to allow fetch first
transport-helper: skip ls-refs if unnecessary
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
The only transport that does not allow fetch() to be called before
get_refs_list() is the bundle transport. Clean up the code by teaching
the bundle transport the ability to do this, and removing support for
transports that don't support this order of invocation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e70a3030e7 ("fetch: do not list refs if fetching only hashes",
2018-10-07) and its ancestors taught Git, as an optimization, to skip
the ls-refs step when it is not necessary during a protocol v2 fetch
(for example, when lazy fetching a missing object in a partial clone, or
when running "git fetch --no-tags <remote> <SHA-1>"). But that was only
done for natively supported protocols; in particular, HTTP was not
supported.
Teach Git to skip ls-refs when using remote helpers that support connect
or stateless-connect. To do this, fetch() is made an acceptable entry
point. Because fetch() can now be the first function in the vtable
called, "get_helper(transport);" has to be added to the beginning of
that function to set the transport up (if not yet set up) before
process_connect() is invoked.
When fetch() is called, the transport could be taken over (this happens
if "connect" or "stateless-connect" is successfully run without any
"fallback" response), or not. If the transport is taken over, execution
continues like execution for natively supported protocols
(fetch_refs_via_pack() is executed, which will fetch refs using ls-refs
if needed). If not, the remote helper interface will invoke
get_refs_list() if it hasn't been invoked yet, preserving existing
behavior.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --atomic" that goes over the transport-helper (namely,
the smart http transport) failed to prevent refs to be pushed when
it can locally tell that one of the ref update will fail without
having to consult the other end, which has been corrected.
* es/local-atomic-push-failure-with-http:
transport-helper: avoid var decl in for () loop control
transport-helper: enforce atomic in push_refs_with_push
The ownership rule for the file descriptor to fast-import remote
backend was mixed up, leading to unrelated file descriptor getting
closed, which has been fixed.
* mh/import-transport-fd-fix:
Use xmmap_gently instead of xmmap in use_pack
dup() the input fd for fast-import used for remote helpers
"git push --atomic" that goes over the transport-helper (namely,
the smart http transport) failed to prevent refs to be pushed when
it can locally tell that one of the ref update will fail without
having to consult the other end, which has been corrected.
* es/local-atomic-push-failure-with-http:
transport-helper: avoid var decl in for () loop control
transport-helper: enforce atomic in push_refs_with_push
Teach transport-helper how to notice if skipping a ref during push would
violate atomicity on the client side. We notice that a ref would be
rejected, and choose not to send it, but don't notice that if the client
has asked for --atomic we are violating atomicity if all the other
pushes we are sending would succeed. Asking the server end to uphold
atomicity wouldn't work here as the server doesn't have any idea that we
tried to update a ref that's broken.
The added test-case is a succinct way to reproduce this issue that fails
today. The same steps work fine when we aren't using a transport-helper
to get to the upstream, i.e. when we've added a local repository as a
remote:
git remote add ~/upstream upstream
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the filter_spec string a string_list rather than a raw C string.
The list of strings must be concatted together to make a complete
filter_spec. A future patch will use this capability to build "combine:"
filter specs gradually.
A strbuf would seem to be a more natural choice for this object, but it
unfortunately requires initialization besides just zero'ing out the
memory. This results in all container structs, and all containers of
those structs, etc., to also require initialization. Initializing them
all would be more cumbersome that simply using a string_list, which
behaves properly when its contents are zero'd.
For the purposes of code simplification, change behavior in how filter
specs are conveyed over the protocol: do not normalize the tree:<depth>
filter specs since there should be no server in existence that supports
tree:# but not tree:#k etc.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ownership rule for the file descriptor to fast-import remote
backend was mixed up, leading to unrelated file descriptor getting
closed, which has been fixed.
* mh/import-transport-fd-fix:
Use xmmap_gently instead of xmmap in use_pack
dup() the input fd for fast-import used for remote helpers
When a remote helper exposes the "import" capability, stdout of the
helper is sent to stdin of a new fast-import process. This is done by
setting the corresponding child_process's in field to the value of the
out field of the helper child_process.
The child_process API is defined to close the file descriptors it's
given when calling start_command. This means when start_command is
called for the fast-import process, its input fd (the output fd of the
helper), is closed.
But when the transport helper is later destroyed, in disconnect_helper,
its input and output are closed, which means close() is called with
an invalid fd (since it was already closed as per above). Or worse, with
a valid fd owned by something else (since fd numbers can be reused).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add trace2 child classification for transport processes.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
Portability updates for the HPE NonStop platform.
* rb/hpe:
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
git-compat-util.h: add FLOSS headers for HPE NonStop
config.mak.uname: support for modern HPE NonStop config.
transport-helper: drop read/write errno checks
transport-helper: use xread instead of read
When communicating with a remote server or a subprocess, use
expanded numbers rather than numbers with scaling suffix in the
object filter spec (e.g. "limit:blob=1k" becomes
"limit:blob=1024").
Update the protocol docs to note that clients should always perform this
expansion, to allow for more compatibility between server
implementations.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we use xread() and xwrite() here, EINTR, EAGAIN, and
EWOULDBLOCK retries are already handled for us, and we will
never see these errno values ourselves. We can drop these
conditions entirely, making the code easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fix was needed on HPE NonStop NSE and NSX where SSIZE_MAX is less than
BUFFERSIZE resulting in EINVAL. The call to read in transport-helper.c
was the only place outside of wrapper.c where it is used instead of xread.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The built-in bundle transport and the transport helper interface do not
work when transport_fetch_refs() is called immediately after transport
creation. This will be needed in a subsequent patch, so fix this.
Evidence: fetch_refs_from_bundle() relies on data->header being
initialized in get_refs_from_bundle(), and fetch() in transport-helper.c
relies on either data->fetch or data->import being set by get_helper(),
but neither transport_helper_init() nor fetch() calls get_helper().
Up until the introduction of the partial clone feature, this has not
been a problem, because transport_fetch_refs() is always called after
transport_get_remote_refs(). With the introduction of the partial clone
feature, which involves calling transport_fetch_refs() (to fetch objects
by their OIDs) without transport_get_remote_refs(), this is still not a
problem, but only coincidentally - we do not support partially cloning a
bundle, and as for cloning using a transport-helper-using protocol, it
so happens that before transport_fetch_refs() is called, fetch_refs() in
fetch-object.c calls transport_set_option(), which means that the
aforementioned get_helper() is invoked through set_helper_option() in
transport-helper.c.
This could be fixed by fixing the transports themselves, but it doesn't
seem like a good idea to me to open up previously untested code paths;
also, there may be transport helpers in the wild that assume that "list"
is always called before "fetch". Instead, fix this by having
transport_fetch_refs() call transport_get_remote_refs() to ensure that
the latter is always called at least once, unless the transport
explicitly states that it supports fetching without listing refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" sometimes failed to update the remote-tracking refs,
which has been corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: unify ref in and out param
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
When a user fetches:
- at least one up-to-date ref and at least one non-up-to-date ref,
- using HTTP with protocol v0 (or something else that uses the fetch
command of a remote helper)
some refs might not be updated after the fetch.
This bug was introduced in commit 989b8c4452 ("fetch-pack: put shallow
info in output parameter", 2018-06-28) which allowed transports to
report the refs that they have fetched in a new out-parameter
"fetched_refs". If they do so, transport_fetch_refs() makes this
information available to its caller.
Users of "fetched_refs" rely on the following 3 properties:
(1) it is the complete list of refs that was passed to
transport_fetch_refs(),
(2) it has shallow information (REF_STATUS_REJECT_SHALLOW set if
relevant), and
(3) it has updated OIDs if ref-in-want was used (introduced after
989b8c4452).
In an effort to satisfy (1), whenever transport_fetch_refs()
filters the refs sent to the transport, it re-adds the filtered refs to
whatever the transport supplies before returning it to the user.
However, the implementation in 989b8c4452 unconditionally re-adds the
filtered refs without checking if the transport refrained from reporting
anything in "fetched_refs" (which it is allowed to do), resulting in an
incomplete list, no longer satisfying (1).
An earlier effort to resolve this [1] solved the issue by readding the
filtered refs only if the transport did not refrain from reporting in
"fetched_refs", but after further discussion, it seems that the better
solution is to revert the API change that introduced "fetched_refs".
This API change was first suggested as part of a ref-in-want
implementation that allowed for ref patterns and, thus, there could be
drastic differences between the input refs and the refs actually fetched
[2]; we eventually decided to only allow exact ref names, but this API
change remained even though its necessity was decreased.
Therefore, revert this API change by reverting commit 989b8c4452, and
make receive_wanted_refs() update the OIDs in the sought array (like how
update_shallow() updates shallow information in the sought array)
instead. A test is also included to show that the user-visible bug
discussed at the beginning of this commit message no longer exists.
[1] https://public-inbox.org/git/20180801171806.GA122458@google.com/
[2] https://public-inbox.org/git/86a128c5fb710a41791e7183207c4d64889f9307.1485381677.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
