The code to produce progress output from "git commit-graph --write"
had a few breakages, which have been fixed.
* sg/commit-graph-progress-fix:
commit-graph: fix "Writing out commit graph" progress counter
commit-graph: fix progress of reachable commits
When "fetch.writeCommitGraph" configuration is set in a shallow
repository and a fetch moves the shallow boundary, we wrote out
broken commit-graph files that do not match the reality, which has
been corrected.
* tb/fix-persistent-shallow:
commit.c: don't persist substituted parents when unshallowing
76ffbca71a (commit-graph: write Bloom filters to commit graph file,
2020-04-06) added two delayed progress lines to writing the Bloom
filter index and data chunk. This is wrong, because a single common
progress is used while writing all chunks, which is not updated while
writing these two new chunks, resulting in incomplete-looking "done"
lines:
Expanding reachable commits in commit graph: 888679, done.
Computing commit changed paths Bloom filters: 100% (888678/888678), done.
Writing out commit graph in 6 passes: 66% (3554712/5332068), done.
Use the common 'struct progress' instance while writing the Bloom
filter chunks as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To display a progress line while iterating over all refs,
d335ce8f24 (commit-graph.c: show progress of finding reachable
commits, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around a
for_each_ref() invocation. Alas, the stop_progress() call ended up at
the wrong place, after write_commit_graph(), which does all the
commit-graph computation and writing, and has several progress lines
of its own. Consequently, that new
Collecting referenced commits: 123
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
Expanding reachable commits in commit graph: 344786, done.
Computing commit changed paths Bloom filters: 100% (344786/344786), done.
Collecting referenced commits: 154, done.
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (data.progress)' condition
protecting the stop_progress() call, because that function is prepared
to handle a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier patch, multiple struct acccesses to `graph_pos` and
`generation` were auto-converted to multiple method calls.
Since the values are fixed and commit-slab access costly, we would be
better off with storing the values as a local variable and reusing it.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove members `graph_pos` and `generation` from the struct commit.
The default assignments in init_commit_node() are no longer valid,
which is fine as the slab helpers return appropriate default values and
the assignments are removed.
We will replace existing use of commit->generation and commit->graph_pos
by commit_graph_data_slab helpers using
`contrib/coccinelle/commit.cocci'.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The struct commit is used in many contexts. However, members
`generation` and `graph_pos` are only used for commit-graph related
operations and otherwise waste memory.
This wastage would have been more pronounced as we transition to
generation number v2, which uses 64-bit generation number instead of
current 32-bits.
As they are often accessed together, let's introduce struct
commit_graph_data and move them to a commit_graph_data slab.
While the overall test suite runs just as fast as master,
(series: 26m48s, master: 27m34s, faster by 2.87%), certain commands
like `git merge-base --is-ancestor` were slowed by 40% as discovered
by Szeder Gábor [1]. After minimizing commit-slab access, the slow down
persists but is closer to 20%.
Derrick Stolee believes the slow down is attributable to the underlying
algorithm rather than the slowness of commit-slab access [2] and we will
follow-up in a later series.
[1]: https://lore.kernel.org/git/20200607195347.GA8232@szeder.dev/
[2]: https://lore.kernel.org/git/13db757a-9412-7f1e-805c-8a028c4ab2b1@gmail.com/
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7c5c9b9c57 (commit-graph: error out on invalid commit oids in
'write --stdin-commits', 2019-08-05), the commit-graph builtin dies on
receiving non-commit OIDs as input to '--stdin-commits'.
This behavior can be cumbersome to work around in, say, the case of
piping 'git for-each-ref' to 'git commit-graph write --stdin-commits' if
the caller does not want to cull out non-commits themselves. In this
situation, it would be ideal if 'git commit-graph write' wrote the graph
containing the inputs that did pertain to commits, and silently ignored
the remainder of the input.
Some options have been proposed to the effect of '--[no-]check-oids'
which would allow callers to have the commit-graph builtin do just that.
After some discussion, it is difficult to imagine a caller who wouldn't
want to pass '--no-check-oids', suggesting that we should get rid of the
behavior of complaining about non-commit inputs altogether.
If callers do wish to retain this behavior, they can easily work around
this change by doing the following:
git for-each-ref --format='%(objectname) %(objecttype) %(*objecttype)' |
awk '
!/commit/ { print "not-a-commit:"$1 }
/commit/ { print $1 }
' |
git commit-graph write --stdin-commits
To make it so that valid OIDs that refer to non-existent objects are
indeed an error after loosening the error handling, perform an extra
lookup to make sure that object indeed exists before sending it to the
commit-graph internals.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous handful of commits, both 'git commit-graph write
--reachable' and '--stdin-commits' learned to peel tags down to the
commits which they refer to before passing them into the commit-graph
internals.
This makes the call to 'lookup_commit_reference_gently()' inside of
'fill_oids_from_commits()' a noop, since all OIDs are commits by that
point.
As such, remove the call entirely, as well as the progress meter, which
has been split and moved out to the callers in the aforementioned
earlier commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While iterating references (to discover the set of commits to write to
the commit-graph with 'git commit-graph write --reachable'),
'add_ref_to_set' can save 'fill_oids_from_commits()' some time by
peeling the references beforehand.
Move peeling out of 'fill_oids_from_commits()' and into
'add_ref_to_set()' to use 'peel_ref()' instead of 'deref_tag()'. Doing
so allows the commit-graph machinery to use the peeled value from
'$GIT_DIR/packed-refs' instead of having to load and parse tags.
While we're at it, discard non-commit objects reachable from ref tips.
This would be done automatically by 'fill_oids_from_commits()', but such
functionality will be removed in a subsequent patch after the call to
'lookup_commit_reference_gently' is dropped (at which point a non-commit
object in the commits oidset will become an error).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git commit-graph write --reachable' is invoked, the commit-graph
machinery calls 'for_each_ref()' to discover the set of reachable
commits.
Right now the 'add_ref_to_set' callback is not doing anything other than
adding an OID to the set of known-reachable OIDs. In a subsequent
commit, 'add_ref_to_set' will presumptively peel references. This
operation should be fast for repositories with an up-to-date
'$GIT_DIR/packed-refs', but may be slow in the general case.
So that it doesn't appear that 'git commit-graph write' is idling with
'--reachable' in the slow case, add a progress meter to provide some
output in the meantime.
In general, we don't expect a progress meter to appear at all, since
peeling references with a 'packed-refs' file is quick. If it's slow and
we do show a progress meter, the subsequent 'fill_oids_from_commits()'
will be fast, since all of the calls to
'lookup_commit_reference_gently()' will be no-ops.
Both progress meters are delayed, so it is unlikely that more than one
will appear. In either case, this intermediate state will go away in a
handful of patches, at which point there will be at most one progress
meter.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the files commit-graph subsystem keeps on disk did not
correctly honor the core.sharedRepository settings and some were
left read-write.
* tb/commit-graph-perm-bits:
commit-graph.c: make 'commit-graph-chain's read-only
commit-graph.c: ensure graph layers respect core.sharedRepository
commit-graph.c: write non-split graphs as read-only
lockfile.c: introduce 'hold_lock_file_for_update_mode'
tempfile.c: introduce 'create_tempfile_mode'
In subsequent patches, we are going to update a progress meter when
'add_ref_to_set()' is called, and need a convenient way to pass a
'struct progress *' in from the caller.
Introduce 'refs_cb_data' as a catch-all for parameters that
'add_ref_to_set' may need, and wrap the existing single parameter in
that struct.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fuzzer running on the entry point provided by fuzz-commit-graph.c
revealed a memory leak when parse_commit_graph() creates a struct
bloom_filter_settings and then returns early due to error. Fix that
error by always freeing that struct first (if it exists) before
returning early due to error.
While making that change, I also noticed another possible memory leak -
when the BLOOMDATA chunk is provided but not BLOOMINDEXES. Also fix that
error.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame" learns to take advantage of the "changed-paths" Bloom
filter stored in the commit-graph file.
* ds/blame-on-bloom:
test-bloom: check that we have expected arguments
test-bloom: fix some whitespace issues
blame: drop unused parameter from maybe_changed_path
blame: use changed-path Bloom filters
tests: write commit-graph with Bloom filters
revision: complicated pathspecs disable filters
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
The commit-graph code exhausted file descriptors easily when it
does not have to.
* tb/commit-graph-fd-exhaustion-fix:
commit-graph: close descriptors after mmap
commit-graph.c: gracefully handle file descriptor exhaustion
t/test-lib.sh: make ULIMIT_FILE_DESCRIPTORS available to tests
commit-graph.c: don't use discarded graph_name in error
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous commit, we made incremental graph layers read-only by
using 'git_mkstemp_mode' with permissions '0444'.
There is no reason that 'commit-graph-chain's should be modifiable by
the user, since they are generated at a temporary location and then
atomically renamed into place.
To ensure that these files are read-only, too, use
'hold_lock_file_for_update_mode' with the same read-only permission
bits, and let the umask and 'adjust_shared_perm' take care of the rest.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-layered commit-graphs use 'adjust_shared_perm' to make the
commit-graph file readable (or not) to a combination of the user, group,
and others.
Call 'adjust_shared_perm' for split-graph layers to make sure that these
also respect 'core.sharedRepository'. The 'commit-graph-chain' file
already respects this configuration since it uses
'hold_lock_file_for_update' (which calls 'adjust_shared_perm' eventually
in 'create_tempfile_mode').
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, Git learned 'hold_lock_file_for_update_mode' to
allow the caller to specify the permission bits (prior to further
adjustment by the umask and shared repository permissions) used when
acquiring a temporary file.
Use this in the commit-graph machinery for writing a non-split graph to
acquire an opened temporary file with permissions read-only permissions
to match the split behavior. (In the split case, Git uses
git_mkstemp_mode' for each of the commit-graph layers with permission
bits '0444').
One can notice this discrepancy when moving a non-split graph to be part
of a new chain. This causes a commit-graph chain where all layers have
read-only permission bits, except for the base layer, which is writable
for the current user.
Resolve this discrepancy by using the new
'hold_lock_file_for_update_mode' and passing the desired permission
bits.
Doing so causes some test fallout in t5318 and t6600. In t5318, this
occurs in tests that corrupt a commit-graph file by writing into it. For
these, 'chmod u+w'-ing the file beforehand resolves the issue. The
additional spot in 'corrupt_graph_verify' is necessary because of the
extra 'git commit-graph write' beforehand (which *does* rewrite the
commit-graph file). In t6600, this is caused by copying a read-only
commit-graph file into place and then trying to replace it. For these,
make these files writable.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit-graph write --expire-time=<timestamp>" did not use the
given timestamp correctly, which has been corrected.
* ds/commit-graph-expiry-fix:
commit-graph: fix buggy --expire-time option
We don't ever refer to the descriptor after mmap-ing it. And keeping it
open means we can run out of descriptors in degenerate cases (e.g.,
thousands of split chain files). Let's close it as soon as possible.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a layered commit-graph, the commit-graph machinery uses
'commit_graph_filenames_after' and 'commit_graph_hash_after' to keep
track of the layers in the chain that we are in the process of writing.
When the number of commit-graph layers shrinks, we initialize all
entries in the aforementioned arrays, because we know the structure of
the new commit-graph chain immediately (since there are no new layers,
there are no unknown hash values).
But when the number of commit-graph layers grows (i.e., that
'num_commit_graphs_after > num_commit_graphs_before'), then we leave
some entries in the filenames and hashes arrays as uninitialized,
because we will fill them in later as those values become available.
For instance, we rely on 'write_commit_graph_file's to store the
filename and hash of the last layer in the new chain, which is the one
that it is responsible for writing. But, it's possible that
'write_commit_graph_file' may fail, e.g., from file descriptor
exhaustion. In this case it is possible that 'git_mkstemp_mode' will
fail, and that function will return early *before* setting the values
for the last commit-graph layer's filename and hash.
This causes a number of upleasant side-effects. For instance, trying to
'free()' each entry in 'ctx->commit_graph_filenames_after' (and
similarly for the hashes array) causes us to 'free()' uninitialized
memory, since the area is allocated with 'malloc()' and is therefore
subject to contain garbage (which is left alone when
'write_commit_graph_file' returns early).
This can manifest in other issues, like a general protection fault,
and/or leaving a stray 'commit-graph-chain.lock' around after the
process dies. (The reasoning for this is still a mystery to me, since
we'd otherwise usually expect the kernel to run tempfile.c's 'atexit()'
handlers in the case of a normal death...)
To resolve this, initialize the memory with 'CALLOC_ARRAY' so that
uninitialized entries are filled with zeros, and can thus be 'free()'d
as a noop instead of causing a fault.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a commit-graph layer, we do so in a temporary file which is
renamed into place. If we fail to create a temporary file, for e.g.,
because we have too many open files, then 'git_mkstemp_mode' sets the
pattern to the empty string, in which case we get an error something
along the lines of:
error: unable to create ''
It's not useful to show the pattern here at all, since we (1) know the
pattern is well-formed, and (2) would have already shown the dirname
when trying to create the leading directories. So, replace this error
with something friendlier.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_COMMIT_GRAPH environment variable updates the commit-
graph file whenever "git commit" is run, ensuring that we always
have an updated commit-graph throughout the test suite. The
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS environment variable was
introduced to write the changed-path Bloom filters whenever "git
commit-graph write" is run. However, the GIT_TEST_COMMIT_GRAPH
trick doesn't launch a separate process and instead writes it
directly.
To expand the number of tests that have commits in the commit-graph
file, add a helper method that computes the commit-graph and place
that helper inside "git commit" and "git merge".
In the helper method, check GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS
to ensure we are writing changed-path Bloom filters whenever
possible.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating on a stream of commit OIDs on stdin, 'git commit-graph
write' checks that each OID refers to an object that is indeed a commit.
This is convenient to make sure that the given input is well-formed, but
can sometimes be undesirable.
For example, server operators may wish to feed the refnames that were
updated during a push to 'git commit-graph write --input=stdin-commits',
and silently discard refs that don't point at commits. This can be done
by combing the output of 'git for-each-ref' with '--format
%(*objecttype)', but this requires opening up a potentially large number
of objects. Instead, it is more convenient to feed the updated refs to
the commit-graph machinery, and let it throw out refs that don't point
to commits.
Introduce '--[no-]check-oids' to make such a behavior possible. With
'--check-oids' (the default behavior to retain backwards compatibility),
'git commit-graph write' will barf on a non-commit line in its input.
With 'no-check-oids', such lines will be silently ignored, making the
above possible by specifying this option.
No matter which is supplied, 'git commit-graph write' retains the
behavior from the previous commit of rejecting non-OID inputs like
"HEAD" and "refs/heads/foo" as before.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'write_commit_graph()' function takes in either a string list of
pack indices, or a string list of hexadecimal commit OIDs. These
correspond to the '--stdin-packs' and '--stdin-commits' mode(s) from
'git commit-graph write'.
Using a string_list of hexadecimal commit IDs is not the most efficient
use of memory, since we can instead use the 'struct oidset', which is
more well-suited for this case.
This has another benefit which will become apparent in the following
commit. This is that we are about to disambiguate the kinds of errors we
produce with '--stdin-commits' into "non-hex input" and "hex-input, but
referring to a non-commit object". By having 'write_commit_graph' take
in a 'struct oidset *' of commits, we place the burden on the caller (in
this case, the builtin) to handle the first case, and the commit-graph
machinery can handle the second case.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add logic to
a) parse Bloom filter information from the commit graph file and,
b) re-use existing Bloom filters.
See Documentation/technical/commit-graph-format for the format in which
the Bloom filter information is written to the commit graph file.
To read Bloom filter for a given commit with lexicographic position
'i' we need to:
1. Read BIDX[i] which essentially gives us the starting index in BDAT for
filter of commit i+1. It is essentially the index past the end
of the filter of commit i. It is called end_index in the code.
2. For i>0, read BIDX[i-1] which will give us the starting index in BDAT
for filter of commit i. It is called the start_index in the code.
For the first commit, where i = 0, Bloom filter data starts at the
beginning, just past the header in the BDAT chunk. Hence, start_index
will be 0.
3. The length of the filter will be end_index - start_index, because
BIDX[i] gives the cumulative 8-byte words including the ith
commit's filter.
We toggle whether Bloom filters should be recomputed based on the
compute_if_not_present flag.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the technical documentation for commit-graph-format with
the formats for the Bloom filter index (BIDX) and Bloom filter
data (BDAT) chunks. Write the computed Bloom filters information
to the commit graph file using this format.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph builtin has an --expire-time option that takes a
datetime using OPT_EXPIRY_DATE(). However, the implementation inside
expire_commit_graphs() was treating a non-zero value as a number of
seconds to subtract from "now".
Update t5323-split-commit-graph.sh to demonstrate the correct value
of the --expire-time option by actually creating a crud .graph file
with mtime earlier than the expire time. Instead of using a super-
early time (1980) we use an explicit, and recent, time. Using
test-tool chmtime to create two files on either end of an exact
second, we create a test that catches this failure no matter the
current time. Using a fixed date is more portable than trying to
format a relative date string into the --expiry-date input.
I noticed this when inspecting some Scalar repos that had an excess
number of commit-graph files. In Scalar, we were using this second
interpretation by using "--expire-time=3600" to mean "delete graphs
older than one hour ago" to avoid deleting a commit-graph that a
foreground process may be trying to load.
Also I noticed that the help text was copied from the --max-commits
option. Fix that help text.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git commit-graph write --changed-paths', we sort the
commits by pack-order to save time when computing the changed-paths
bloom filters. This does not help when finding the commits via the
'--reachable' flag.
If not using pack-order, then sort by generation number before
examining the diff. Commits with similar generation are more likely
to have many trees in common, making the diff faster.
On the Linux kernel repository, this change reduced the computation
time for 'git commit-graph write --reachable --changed-paths' from
3m00s to 1m37s.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Looking at the diff of commit objects in pack order is much faster than
in sha1 order, as it gives locality to the access of tree deltas
(whereas sha1 order is effectively random). Unfortunately the
commit-graph code sorts the commits (several times, sometimes as an oid
and sometimes a pointer-to-commit), and we ultimately traverse in sha1
order.
Instead, let's remember the position at which we see each commit, and
traverse in that order when looking at bloom filters. This drops my time
for "git commit-graph write --changed-paths" in linux.git from ~4
minutes to ~1.5 minutes.
Probably the "--reachable" code path would want something similar.
Or alternatively, we could use a different data structure (either a
hash, or maybe even just a bit in "struct commit") to keep track of
which oids we've seen, etc instead of sorting. And then we could keep
the original order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new COMMIT_GRAPH_WRITE_CHANGED_PATHS flag that makes Git compute
Bloom filters for the paths that changed between a commit and it's
first parent, for each commit in the commit-graph. This computation
is done on a commit-by-commit basis.
We will write these Bloom filters to the commit-graph file, to store
this data on disk, in the next change in this series.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a minor cleanup to make it easier to change
the number of chunks being written to the commit
graph.
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_commit_graphs() copies the (translated) progress message into a
strbuf and passes the copy to start_delayed_progress() at each loop
iteration. The latter function takes a string pointer, so let's avoid
the detour and hand the string to it directly. That's shorter, simpler
and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a similar treatment as in the previous patch to pass a 'struct
object_directory *' through the 'load_commit_graph_one_fd_st'
initializer, too.
This prevents a potential bug where a pointer comparison is made to a
NULL 'g->odb', which would cause the commit-graph machinery to think
that a pair of commit-graphs belonged to different alternates when in
fact they do not (i.e., in the case of no '--object-dir').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of the previous patch, all calls to 'commit-graph.c' functions which
perform path normalization (for e.g., 'get_commit_graph_filename()') are
of the form 'ctx->odb->path', which is always in normalized form.
Now that there are no callers passing non-normalized paths to these
functions, ensure that future callers are bound by the same restrictions
by making these functions take a 'struct object_directory *' instead of
a 'const char *'. To match, replace all calls with arguments of the form
'ctx->odb->path' with 'ctx->odb' To recover the path, functions that
perform path manipulation simply use 'odb->path'.
Further, avoid string comparisons with arguments of the form
'odb->path', and instead prefer raw pointer comparisons, which
accomplish the same effect, but are far less brittle.
This has a pleasant side-effect of making these functions much more
robust to paths that cannot be normalized by 'normalize_path_copy()',
i.e., because they are outside of the current working directory.
For example, prior to this patch, Valgrind reports that the following
uninitialized memory read [1]:
$ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ )
because 'normalize_path_copy()' can't normalize '../.git' (since it's
relative to but above of the current working directory) [2].
By using a 'struct object_directory *' directly,
'get_commit_graph_filename()' does not need to normalize, because all
paths are relative to the current working directory since they are
always read from the '->path' of an object directory.
[1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net.
[2]: The bug here is that 'get_commit_graph_filename()' returns the
result of 'normalize_path_copy()' without checking the return
value.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous patch, the 'char *object_dir' in 'struct commit_graph' was
replaced with a 'struct object_directory'. This patch applies the same
treatment to 'struct commit_graph', which is another intermediate step
towards getting rid of all path normalization in 'commit-graph.c'.
Instead of taking a 'char *object_dir', functions that construct a
'struct commit_graph' now take a 'struct object_directory *'. Any code
that needs an object directory path use '->path' instead.
This ensures that all calls to functions that perform path normalization
are given arguments which do not themselves require normalization. This
prepares those functions to drop their normalization entirely, which
will occur in the subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are lots of places in 'commit-graph.h' where a function either has
(or almost has) a full 'struct object_directory *', accesses '->path',
and then throws away the rest of the struct.
This can cause headaches when comparing the locations of object
directories across alternates (e.g., in the case of deciding if two
commit-graph layers can be merged). These paths are normalized with
'normalize_path_copy()' which mitigates some comparison issues, but not
all [1].
Replace usage of 'char *object_dir' with 'odb->path' by storing a
'struct object_directory *' in the 'write_commit_graph_context'
structure. This is an intermediate step towards getting rid of all path
normalization in 'commit-graph.c'.
Resolving a user-provided '--object-dir' argument now requires that we
compare it to the known alternates for equality. Prior to this patch,
an unknown '--object-dir' argument would silently exit with status zero.
This can clearly lead to unintended behavior, such as verifying
commit-graphs that aren't in a repository's own object store (or one of
its alternates), or causing a typo to mask a legitimate commit-graph
verification failure. Make this error non-silent by 'die()'-ing when the
given '--object-dir' does not match any known alternate object store.
[1]: In my testing, for example, I can get one side of the commit-graph
code to fill object_dir with "./objects" and the other with just
"objects".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to write split commit-graph file(s) upon fetching computed
bogus value for the parameter used in splitting the resulting
files, which has been corrected.
* ds/commit-graph-set-size-mult:
commit-graph: prefer default size_mult when given zero
