Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard message for reporting the use of multiple mutually
exclusive options by calling die_for_incompatible_opt3() instead of
rolling our own. This has the benefits of showing only the actually
given options, reducing the number of strings to translate and making
the UI slightly more consistent.
Adjust the test to no longer insist on a specific order of the
reported options, as this implementation detail does not affect the
usefulness of the error message.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we have multiple ways to show the value of a given reference, we
do not have any way to check whether a reference exists at all. While
commands like git-rev-parse(1) or git-show-ref(1) can be used to check
for reference existence in case the reference resolves to something
sane, neither of them can be used to check for existence in some other
scenarios where the reference does not resolve cleanly:
- References which have an invalid name cannot be resolved.
- References to nonexistent objects cannot be resolved.
- Dangling symrefs can be resolved via git-symbolic-ref(1), but this
requires the caller to special case existence checks depending on
whether or not a reference is symbolic or direct.
Furthermore, git-rev-list(1) and other commands do not let the caller
distinguish easily between an actually missing reference and a generic
error.
Taken together, this seems like sufficient motivation to introduce a
separate plumbing command to explicitly check for the existence of a
reference without trying to resolve its contents.
This new command comes in the form of `git show-ref --exists`. This
new mode will exit successfully when the reference exists, with a
specific exit code of 2 when it does not exist, or with 1 when there
has been a generic error.
Note that the only way to properly implement this command is by using
the internal `refs_read_raw_ref()` function. While the public function
`refs_resolve_ref_unsafe()` can be made to behave in the same way by
passing various flags, it does not provide any way to obtain the errno
with which the reference backend failed when reading the reference. As
such, it becomes impossible for us to distinguish generic errors from
the explicit case where the reference wasn't found.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis treats the `--verify` and the implicit mode the same. They
are slightly different though:
- They accept different sets of flags.
- The implicit mode accepts patterns while the `--verify` mode
accepts references.
Split up the synopsis for these two modes such that we can disambiguate
those differences.
While at it, drop "--quiet" from the pattern mode's synopsis. It does
not make a lot of sense to list patterns, but squelch the listing output
itself. The description for "--quiet" is adapted accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-show-ref(1) command has three different modes, of which one is
implicit and the other two can be chosen explicitly by passing a flag.
But while these modes are standalone and cause us to execute completely
separate code paths, we gladly accept the case where a user asks for
both `--exclude-existing` and `--verify` at the same time even though it
is not obvious what will happen. Spoiler: we ignore `--verify` and
execute the `--exclude-existing` mode.
Let's explicitly detect this invalid usage and die in case both modes
were requested.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patterns subcommand is the last command that still uses global
variables to track its options. Convert it to use a structure instead
with the same motivation as preceding commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `show_one()` function implicitly receives a bunch of options which
are tracked via global variables. This makes it hard to see which
subcommands of git-show-ref(1) actually make use of these options.
Introduce a `show_one_options` structure that gets passed down to this
function. This allows us to get rid of more global state and makes it
more explicit which subcommands use those options.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing patterns to git-show-ref(1) we're checking whether any
reference matches -- if none do, we indicate this condition via an
unsuccessful exit code.
We're using a global variable to count these matches, which is required
because the counter is getting incremented in a callback function. But
now that we have the `struct show_ref_data` in place, we can get rid of
the global variable and put the counter in there instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not immediately obvious options which options are applicable to
what subcommand in git-show-ref(1) because all options exist as global
state. This can easily cause confusion for the reader.
Refactor options for the `--exclude-existing` subcommand to be contained
in a separate structure. This structure is stored on the stack and
passed down as required. Consequently, it clearly delimits the scope of
those options and requires the reader to worry less about global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing patterns to `git show-ref` we have some code that will
cause us to die if `verify && !quiet` is true. But because `verify`
indicates a different subcommand of git-show-ref(1) that causes us to
execute `cmd_show_ref__verify()` and not `cmd_show_ref__patterns()`, the
condition cannot ever be true.
Let's remove this dead code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a leaking string buffer in `git show-ref --exclude-existing`. While
the buffer is technically not leaking because its variable is declared
as static, there is no inherent reason why it should be.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While not immediately obvious, git-show-ref(1) actually implements three
different subcommands:
- `git show-ref <patterns>` can be used to list references that
match a specific pattern.
- `git show-ref --verify <refs>` can be used to list references.
These are _not_ patterns.
- `git show-ref --exclude-existing` can be used as a filter that
reads references from standard input, performing some conversions
on each of them.
Let's make this more explicit in the code by splitting up the three
subcommands into separate functions. This also allows us to address the
confusingly named `patterns` variable, which may hold either patterns or
reference names.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `pattern` variable is a global variable that tracks either the
reference names (not patterns!) for the `--verify` mode or the patterns
for the non-verify mode. This is a bit confusing due to the slightly
different meanings.
Convert the variable to be local. While this does not yet fix the double
meaning of the variable, this change allows us to address it in a
subsequent patch more easily by explicitly splitting up the different
subcommands of git-show-ref(1).
Note that we introduce a `struct show_ref_data` to pass the patterns to
`show_ref()`. While this is overengineered now, we will extend this
structure in a subsequent patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
Change the documentation and -h output for those built-in commands
where both the -h output and *.txt were lacking in word-wrapping.
There are many more built-ins that could use this treatment, this
change is narrowed to those where this whitespace change is needed to
make the -h and *.txt consistent in the end.
In the case of "Documentation/git-hash-object.txt" and
"builtin/hash-object.c" this is not a "doc txt & -h consistency"
change, as we're changing both versions, doing so here makes a
subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75d (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `show-ref` is combined with the `--heads` or `--tags` options, it
can avoid iterating parts of a repository's references that it doesn't
care about.
But it doesn't take advantage of this potential optimization. When this
command was introduced back in 358ddb62cf (Add "git show-ref" builtin
command, 2006-09-15), `for_each_ref_in()` did exist. But since most
repositories don't have many (any?) references that aren't branches or
tags already, this makes little difference in practice.
Though for repositories with a large imbalance of branches and tags (or,
more likely in the case of server operators, many hidden references),
this can make quite a difference. Take, for example, a repository with
500,000 "hidden" references (all of the form "refs/__hidden__/N"), and
a single branch:
git commit --allow-empty -m "base" &&
seq 1 500000 | sed 's,\(.*\),create refs/__hidden__/\1 HEAD,' |
git update-ref --stdin &&
git pack-refs --all
Outputting the existence of that single branch currently takes on the
order of ~50ms on my machine. The vast majority of this time is wasted
iterating through references that we know we're going to discard.
Instead, teach `show-ref` that it can iterate just "refs/heads" and/or
"refs/tags" when given `--heads` and/or `--tags`, respectively. A few
small interesting things to note:
- When given either option, we can avoid the general-purpose
for_each_ref() call altogether, since we know that it won't give us
any references that we wouldn't filter out already.
- We can make two separate calls to `for_each_fullref_in()` (and
avoid, say, the more specialized `for_each_fullref_in_prefixes()`,
since we know that the set of references enumerated by each is
disjoint, so we'll never see the same reference appear in both
calls.
- We have to use the "fullref" variant (instead of just
`for_each_branch_ref()` and `for_each_tag_ref()`), since we expect
fully-qualified reference names to appear in `show-ref`'s output.
When either of `heads_only` or `tags_only` is set, we can eliminate the
strcmp() calls in `builtin/show-ref.c::show_ref()` altogether, since we
know that `show_ref()` will never see a non-branch or tag reference.
Unfortunately, we can't use `for_each_fullref_in_prefixes()` to enhance
`show-ref`'s pattern matching, since `show-ref` patterns match on the
_suffix_ (e.g., the pattern "foo" shows "refs/heads/foo",
"refs/tags/foo", and etc, not "foo/*").
Nonetheless, in our synthetic example above, this provides a significant
speed-up ("git" is roughly v2.36, "git.compile" is this patch):
$ hyperfine -N 'git show-ref --heads' 'git.compile show-ref --heads'
Benchmark 1: git show-ref --heads
Time (mean ± σ): 49.9 ms ± 6.2 ms [User: 45.6 ms, System: 4.1 ms]
Range (min … max): 46.1 ms … 73.6 ms 43 runs
Benchmark 2: git.compile show-ref --heads
Time (mean ± σ): 2.8 ms ± 0.4 ms [User: 1.4 ms, System: 1.2 ms]
Range (min … max): 1.3 ms … 5.6 ms 957 runs
Summary
'git.compile show-ref --heads' ran
18.03 ± 3.38 times faster than 'git show-ref --heads'
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a filesystem like HFS+, the names of the refs stored as filesystem
entities may become different from what the end-user expects, just
like files in the working tree get "renamed". Work around the
mismatch by paying attention to the core.precomposeUnicode
configuration.
* en/unicode-in-refnames:
Honor core.precomposeUnicode in more places
On Mac's HFS where git sets core.precomposeUnicode to true automatically
by git init/clone, when a user creates a simple unicode refname (in NFC
format) such as españa:
$ git branch españa
different commands would display the branch name differently. For
example, git branch, git log --decorate, and git fast-export all used
65 73 70 61 c3 b1 61 (or "espa\xc3\xb1a")
(NFC form) while show-ref would use
65 73 70 61 6e cc 83 61 (or "espan\xcc\x83a")
(NFD form). A stress test for git filter-repo was tripped up by this
inconsistency, though digging in I found that the problems could
compound; for example, if the user ran
$ git pack-refs --all
and then tried to check out the branch, they would be met with:
$ git checkout españa
error: pathspec 'españa' did not match any file(s) known to git
$ git checkout españa --
fatal: invalid reference: españa
$ git branch
españa
* master
Note that the user could run the `git branch` command first and copy and
paste the `españa` portion of the output and still see the same two
errors. Also, if the user added --no-prune to the pack-refs command,
then they would see three branches: master, españa, and españa (those
last two are NFC vs. NFD forms, even if they render the same).
Further, if the user had the `españa` branch checked out before
running `git pack-refs --all`, the user would be greeted with (note
that I'm trimming trailing output with an ellipsis):
$ git rev-parse HEAD
fatal: ambiguous argument 'HEAD': unknown revision or path...
$ git status
On branch españa
No commits yet...
Or worse, if the user didn't check this stuff first, running `git
commit` will create a new commit with all changes of all of history
being squashed into it.
In addition to pack-refs, one could also get into this state with
upload-pack or anything that calls either pack-refs or upload-pack (e.g.
gc or clone).
Add code in a few places (pack-refs, show-ref, upload-pack) to check and
honor the setting of core.precomposeUnicode to avoid these bugs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining callers of has_sha1_file() actually have an object_id
already. They can use the "object" variant, rather than dereferencing
the hash themselves.
The code changes here were completely generated by the included
coccinelle patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert peel_ref (and its corresponding backend) to struct object_id.
This transformation was done with an update to the declaration,
definition, comments, and test helper and the following semantic patch:
@@
expression E1, E2;
@@
- peel_ref(E1, E2.hash)
+ peel_ref(E1, &E2)
@@
expression E1, E2;
@@
- peel_ref(E1, E2->hash)
+ peel_ref(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cf0adba788 ("Store peeled refs in packed-refs file.",
2006-11-19) made the command to die with a message on error even
when --quiet is passed, it left the comment to say it changed the
semantics. But that kind of information belongs to the log message,
not in-code comment. Besides, the behaviour after the change has
been the established one for the past 10 years ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As show_ref() is only ever called on the path where --verify is not
specified, `verify' can never possibly be true here.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move detection of dangling refs into show_one(), so that they are
detected when --verify is present as well as when it is absent.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do the same with --quiet as was done with -d, to remove the need to
perform this check at show_one()'s call site from the --verify branch.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move handling of -d into show_one(), so that it takes effect when
--verify is present as well as when it is absent. This is useful when
the user wishes to avoid the costly iteration of refs.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, when --verify was specified, show-ref would use a separate
code path which did not handle HEAD and treated it as an invalid
ref. Thus, "git show-ref --verify HEAD" (where "--verify" is used
because the user is not interested in seeing refs/remotes/origin/HEAD)
did not work as expected.
Instead of insisting that the input begins with "refs/", allow "HEAD"
as well in the codepath that handles "--verify", so that all valid
full refnames including HEAD are passed to the same output machinery.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag PARSE_OPT_NO_INTERNAL_HELP is set to allow overriding the
option -h, except when it's the only one given. This is the default
behavior now, so remove the flag and the hand-rolled --help-all
handling. The internal --help-all handler now actually shows hidden
options, i.e. -h in this case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
The synopsys text and the usage string of subcommands that read list
of things from the standard input are often shown like this:
git gostak [--distim] < <list-of-doshes>
This is problematic in a number of ways:
* The way to use these commands is more often to feed them the
output from another command, not feed them from a file.
* Manual pages outside Git, commands that operate on the data read
from the standard input, e.g "sort", "grep", "sed", etc., are not
described with such a "< redirection-from-file" in their synopsys
text. Our doing so introduces inconsistency.
* We do not insist on where the output should go, by saying
git gostak [--distim] < <list-of-doshes> > <output>
* As it is our convention to enclose placeholders inside <braket>,
the redirection operator followed by a placeholder filename
becomes very hard to read, both in the documentation and in the
help text.
Let's clean them all up, after making sure that the documentation
clearly describes the modes that take information from the standard
input and what kind of things are expected on the input.
[jc: stole example for fmt-merge-msg from Jonathan]
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
