Don't set GIT_EDITOR to ":" when calling prepare-commit-msg hook if the
editor is going to be called (e.g. with "merge -e").
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our xwrite wrapper already deals with a few potential hazards, and
are as such more robust. Prefer it instead of write to get the
robustness benefits everywhere.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-and-improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration variable "merge.ff" was cleary a tri-state to
choose one from "favor fast-forward when possible", "always create
a merge even when the history could fast-forward" and "do not
create any merge, only update when the history fast-forwards", but
the command line parser did not implement the usual convention of
"last one wins, and command line overrides the configuration"
correctly.
* mv/merge-ff-tristate:
merge: handle --ff/--no-ff/--ff-only as a tri-state option
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three options mean "favor fast-forwarding when possible,
without creating an unnecessary merge", "never fast-forward and
always create a merge commit even when the commit being merged is a
strict descendant", and "we do not want to create any merge commit;
update only when the merged commit is a strict descendant".
They are "pick one out of these three possibilities" options, and
correspond to "merge.ff" configuration that is tri-state (yes, no
and only).
However, the implementation did not follow the usual convention for
the command line options (later one wins, and command line overrides
what is in the configuration).
Fix this by consolidating two variables (fast_forward_only and
allow_fast_forward) used in the implementation into one enum that
can take one of the three possible values.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use help.c:help_unknown_ref() instead of die() to provide a
friendlier error message before exiting, when one of the refs
specified in a merge is unknown.
Signed-off-by: Vikrant Varma <vikrant.varma94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "merge/pull" to optionally verify and reject commits that are
not signed properly.
* sg/gpg-sig:
pretty printing: extend %G? to include 'N' and 'U'
merge/pull Check for untrusted good GPG signatures
merge/pull: verify GPG signatures of commits being merged
commit.c/GPG signature verification: Also look at the first GPG status line
Move commit GPG signature verification to commit.c
"git merge $(git rev-parse v1.8.2)" behaved quite differently from
"git merge v1.8.2" as if v1.8.2 were written as v1.8.2^0 and did
not pay much attention to the annotated tag payload.
This makes the code notice the type of the tag object, in addition
to the dwim_ref() based classification the current code uses
(i.e. the name appears in refs/tags/) to decide when to special
case merging of tags.
* jc/merge-tag-object:
t6200: test message for merging of an annotated tag
t6200: use test_config/test_unconfig
merge: a random object may not necssarily be a commit
When --verify-signatures is specified, abort the merge in case a good
GPG signature from an untrusted key is encountered.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --verify-signatures is specified on the command-line of git-merge
or git-pull, check whether the commits being merged have good gpg
signatures and abort the merge in case they do not. This allows e.g.
auto-deployment from untrusted repo hosts.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user could have said "git merge $(git rev-parse v1.0.0)"; we
shouldn't mark it as "Merge commit '15999998fb...'" as the merge
name, even though such an invocation might be crazy.
We could even read the "tag " header from the tag object and replace
the object name the user gave us, but let's not lose the information
by doing so, at least not yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop spending cycles to compute information to be placed on
commented lines in "merge --no-edit", which will be discarded
anyway.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook. t7505 may want a general clean-up but that is
a different topic.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The credit lines "By" and "Via" to credit authors and committers for
their contributions on the side branch are meant as a hint to the
integrator to decide whom to mention in the log message text. After
the integrator saves the message in the editor, they are meant to go
away and that is why they are commented out.
When a merge is recorded without editing the generated message,
however, its contents do not go through the normal stripspace()
and these lines are left in the merge.
Stop producing them when we know the merge is going to be recorded
without editing, i.e. when --no-edit is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions are called in sequencer.c, which is part of
libgit.a. This makes libgit.a potentially require builtin/merge.c for
external git commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A lot of i18n mark-up for the help text from "git <cmd> -h".
* nd/i18n-parseopt-help: (66 commits)
Use imperative form in help usage to describe an action
Reduce translations by using same terminologies
i18n: write-tree: mark parseopt strings for translation
i18n: verify-tag: mark parseopt strings for translation
i18n: verify-pack: mark parseopt strings for translation
i18n: update-server-info: mark parseopt strings for translation
i18n: update-ref: mark parseopt strings for translation
i18n: update-index: mark parseopt strings for translation
i18n: tag: mark parseopt strings for translation
i18n: symbolic-ref: mark parseopt strings for translation
i18n: show-ref: mark parseopt strings for translation
i18n: show-branch: mark parseopt strings for translation
i18n: shortlog: mark parseopt strings for translation
i18n: rm: mark parseopt strings for translation
i18n: revert, cherry-pick: mark parseopt strings for translation
i18n: rev-parse: mark parseopt strings for translation
i18n: reset: mark parseopt strings for translation
i18n: rerere: mark parseopt strings for translation
i18n: status: mark parseopt strings for translation
i18n: replace: mark parseopt strings for translation
...
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers who ask for ERROR_ON_NO_NAME are not so much
concerned that the name will be blank (because, after all,
we will fall back to using the username), but rather it is a
check to make sure that low-quality identities do not end up
in things like commit messages or emails (whereas it is OK
for them to end up in things like reflogs).
When future commits add more quality checks on the identity,
each of these callers would want to use those checks, too.
Rather than modify each of them later to add a new flag,
let's refactor the flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Octopus merge strategy did not reduce heads that are recorded in the
final commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
Instead of waiting until we record the parents of resulting merge, reduce
redundant parents (including our HEAD) immediately after reading them.
The change to t7602 illustrates the essence of the effect of this change.
The octopus merge strategy used to be fed with redundant commits only to
discard them as "up-to-date", but we no longer feed such redundant commits
to it and the affected test degenerates to a regular two-head merge.
And obviously the known-to-be-broken test in t6028 is now fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code around to populate remoteheads list early in the process
before any decision regarding twohead vs octopus and fast-forwardness is
made.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though 1.7.9.x series does not open the editor by default
when merging in general, it does do so in one occassion: when
merging an annotated tag. And worse yet, there is no good way
for older scripts to decline this.
Backport the support for GIT_MERGE_AUTOEDIT environment variable
from 1.7.10 track to help those stuck on 1.7.9.x maintenance
track.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make merge --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The heuristic used by "git merge" to decide if it automatically gives an
editor upon clean automerge is to see if the standard input and the
standard output is the same device and is a tty, we are in an interactive
session. "The same device" test was done by comparing fstat(2) result on
the two file descriptors (and they must match), and we asked isatty() only
for the standard input (we insist that they are the same device and there
is no point asking tty-ness of the standard output).
The stat(2) emulation in the Windows port however does not give a usable
value in the st_ino field, so even if the standard output is connected to
something different from the standard input, "The same device" test may
incorrectly return true. To accomodate it, add another isatty() check for
the standard output stream as well.
Reported-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user explicitly asked us not to, don't launch an editor.
But do everything else the same way as the "edit" case, i.e. leave the
comment with verification result in the log template and record the
mergesig in the resulting merge commit for later inspection.
Based on initiail analysis by Jonathan Nieder.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting at release v1.7.9, if you ask to merge a signed tag, "git merge"
always creates a merge commit, even when the tag points at a commit that
happens to be a descendant of your current commit.
Unfortunately, this interacts rather badly for people who use --ff-only to
make sure that their branch is free of local developments. It used to be
possible to say:
$ git checkout -b frotz v1.7.9~30
$ git merge --ff-only v1.7.9
and expect that the resulting tip of frotz branch matches v1.7.9^0 (aka
the commit tagged as v1.7.9), but this fails with the updated Git with:
fatal: Not possible to fast-forward, aborting.
because a merge that merges v1.7.9 tag to v1.7.9~30 cannot be created by
fast forwarding.
We could teach users that now they have to do
$ git merge --ff-only v1.7.9^0
but it is far more pleasant for users if we DWIMmed this ourselves.
When an integrator pulls in a topic from a lieutenant via a signed tag,
even when the work done by the lieutenant happens to fast-forward, the
integrator wants to have a merge record, so the integrator will not be
asking for --ff-only when running "git pull" in such a case. Therefore,
this change should not regress the support for the use case v1.7.9 wanted
to add.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
