Use the "$GIT_UNZIP" test variable rather than verbatim 'unzip' to unzip the
'scalar diagnose' archive. Using "$GIT_UNZIP" is needed to run the Scalar
tests on systems where 'unzip' is not in the system path.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
source: <PH7PR14MB5594A27B9295E95ACA4D6A69CE8F9@PH7PR14MB5594.namprd14.prod.outlook.com>
* cl/rerere-train-with-no-sign:
contrib/rerere-train: avoid useless gpg sign in training
A coccinelle rule (in contrib/) to encourage use of COPY_ARRAY
macro has been improved.
* rs/cocci-array-copy:
cocci: avoid normalization rules for memcpy
Update git-credential-osxkeychain.c to remove 'format string is not a string
literal (potentially insecure)' compiler warning by treating the string as
an argument.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may have configured "git merge" to always require GPG
signing the resulting commits. We are not running "git merge" to
re-create merge commits, but merely to replay merge conflicts,
and we will immediately discard the resulting commits; there
is no point in signing them.
Override such configuration that forces useless signing from the
command line with the "--no-gpg-sign" option.
Signed-off-by: Celeste Liu <coelacanthus@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Coccinelle rules to detect the pattern of initializing and then
finalizing a structure without using it in between at all, which
happens after code restructuring and the compilers fail to
recognize as an unused variable.
* ab/cocci-unused:
cocci: generalize "unused" rule to cover more than "strbuf"
cocci: add and apply a rule to find "unused" strbufs
cocci: have "coccicheck{,-pending}" depend on "coccicheck-test"
cocci: add a "coccicheck-test" target and test *.cocci rules
Makefile & .gitignore: ignore & clean "git.res", not "*.res"
Makefile: remove mandatory "spatch" arguments from SPATCH_FLAGS
Adapt the content from 'contrib/scalar/README.md' into a design document in
'Documentation/technical/'. In addition to reformatting for asciidoc,
elaborate on the background, purpose, and design choices that went into
Scalar.
Most of this document will persist in the 'Documentation/technical/' after
Scalar has been moved out of 'contrib/' and into the root of Git. Until that
time, it will also contain a temporary "Roadmap" section detailing the
remaining series needed to finish the initial version of Scalar. The section
will be removed once Scalar is moved to the repo root, but in the meantime
serves as a guide for readers to keep up with progress on the feature.
Signed-off-by: Victoria Dye <vdye@github.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rephrase documentation to describe scalar as a "large repo management tool"
rather than an "opinionated management tool". The new description is
intended to more directly reflect the utility of scalar to better guide
users in preparation for scalar being built and installed as part of Git.
Signed-off-by: Victoria Dye <vdye@github.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparation to turn git-submodule.sh into a builtin.
* ab/submodule-cleanup:
git-sh-setup.sh: remove "say" function, change last users
git-submodule.sh: use "$quiet", not "$GIT_QUIET"
submodule--helper: eliminate internal "--update" option
submodule--helper: understand --checkout, --merge and --rebase synonyms
submodule--helper: report "submodule" as our name in some "-h" output
submodule--helper: rename "absorb-git-dirs" to "absorbgitdirs"
submodule update: remove "-v" option
submodule--helper: have --require-init imply --init
git-submodule.sh: remove unused top-level "--branch" argument
git-submodule.sh: make the "$cached" variable a boolean
git-submodule.sh: remove unused $prefix variable
git-submodule.sh: remove unused sanitize_submodule_env()
Some of the rules for using COPY_ARRAY instead of memcpy with sizeof are
intended to reduce the number of sizeof variants to deal with. They can
have unintended side effects if only they match, but not the one for the
COPY_ARRAY conversion at the end.
Avoid these side effects by instead using a self-contained rule for each
combination of array and pointer for source and destination which lists
all sizeof variants inline.
This lets "make contrib/coccinelle/array.cocci.patch" take 15% longer on
my machine, but gives peace of mind that no incomplete transformation
will be generated.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generalize the newly added "unused.cocci" rule to find more than just
"struct strbuf", let's have it find the same unused patterns for
"struct string_list", as well as other code that uses
similar-looking *_{release,clear,free}() and {release,clear,free}_*()
functions.
We're intentionally loose in accepting e.g. a "strbuf_init(&sb)"
followed by a "string_list_clear(&sb, 0)". It's assumed that the
compiler will catch any such invalid code, i.e. that our
constructors/destructors don't take a "void *".
See [1] for example of code that would be covered by the
"get_worktrees()" part of this rule. We'd still need work that the
series is based on (we were passing "worktrees" to a function), but
could now do the change in [1] automatically.
1. https://lore.kernel.org/git/Yq6eJFUPPTv%2Fzc0o@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a coccinelle rule to remove "struct strbuf" initialization
followed by calling "strbuf_release()" function, without any uses of
the strbuf in the same function.
See the tests in contrib/coccinelle/tests/unused.{c,res} for what it's
intended to find and replace.
The inclusion of "contrib/scalar/scalar.c" is because "spatch" was
manually run on it (we don't usually run spatch on contrib).
Per the "buggy code" comment we also match a strbuf_init() before the
xmalloc(), but we're not seeking to be so strict as to make checks
that the compiler will catch for us redundant. Saying we'll match
either "init" or "xmalloc" lines makes the rule simpler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "coccicheck-test" target to test our *.cocci rules, and as a
demonstration add tests for the rules added in 39ea59a257 (remove
unnecessary NULL check before free(3), 2016-10-08) and
1b83d1251e (coccinelle: add a rule to make "expression" code use
FREE_AND_NULL(), 2017-06-15).
I considered making use of the "spatch --test" option, and the choice
of a "tests" over a "t" directory is to make these tests compatible
with such a future change.
Unfortunately "spatch --test" doesn't return meaningful exit codes,
AFAICT you need to "grep" its output to see if the *.res is what you
expect. There's "--test-okfailed", but I didn't find a way to sensibly
integrate those (it relies on some in-between status files, but
doesn't help with the status codes).
Instead let's use a "--sp-file" pattern similar to the main
"coccicheck" rule, with the difference that we use and compare the
two *.res files with cmp(1).
The --very-quiet and --no-show-diff options ensure that we don't need
to pipe stdout and stderr somewhere. Unlike the "%.cocci.patch" rule
we're not using the diff.
The "cmp || git diff" is optimistically giving us better output on
failure, but even if we only have POSIX cmp and no system git
installed we'll still fail with the "cmp", just with an error message
that isn't as friendly. The "2>/dev/null" is in case we don't have a
"git" installed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in
0b624b4cee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contrib/vscode/init.sh script initializes the .vscode directory with
some helpful metadata so VS Code handles Git code better.
One big issue that VS Code has is detecting the tab width based on file
type. ".txt" files were not covered by this script before, so add them
with the appropriate tab widths. This prevents inserting spaces instead
of tabs and keeps the tab width to eight instead of four or two.
While we are here, remove the "editor.wordWrap" settings. The editor's
word wrap is only cosmetic: it does not actually insert newlines when
your typing goes over the column limit. This can make it appear like you
have properly wrapped code, but it is incorrect. Further, existing code
that is over the column limit is wrapped even if your editor window is
wider than the limit. This can make reading such code more difficult.
Without these lines, VS Code renders the lines accurately, without
"ghost" newlines.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8d4d86b0 (cache: remove null_sha1, 2019-08-18) removed the
is_null_sha1() function, rewrite rules to correct callers of the
function to use is_null_oid() instead has become irrelevant, as any
new callers of the function will get caught by the compiler much
more quickly without spending cycles on Coccinelle.
Remove these rules.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implementation of "scalar diagnose" subcommand.
* js/scalar-diagnose:
scalar: teach `diagnose` to gather loose objects information
scalar: teach `diagnose` to gather packfile info
scalar diagnose: include disk space information
scalar: implement `scalar diagnose`
scalar: validate the optional enlistment argument
archive --add-virtual-file: allow paths containing colons
archive: optionally add "virtual" files
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
CMake updates.
* yw/cmake-updates:
cmake: remove (_)UNICODE def on Windows in CMakeLists.txt
cmake: add pcre2 support
cmake: fix CMakeLists.txt on Linux
The short upstream state indicator inherits the colour of the last short
state indicator before it (if there is one), and the sparsity state
indicator inherits this colour as well. This behaviour was introduced by
0ec7c23cdc (git-prompt: make upstream state indicator location
consistent, 2022-02-27), while before this change the aforementioned
indicators were white/the default text colour. Some examples to
illustrate this behaviour (assuming all indicators are enabled and
colourization is on):
* If there is something in the stash, both the '$' and the short
upstream state indicator following it will be blue.
* If the local tree has new, untracked files and there is nothing in
the stash, both the '%' and the short upstream state indicator
will be red.
* If all local changes are added to the index and the stash is empty,
both the '+' and the short upstream state indicator following it will
be green.
* If the local tree is clean and there is nothing in the stash, the
short upstream state indicator will be white/${default text colour}.
This appears to be an unintended side-effect of the change, and makes
little sense semantically (e.g. why is it bad to be in sync with
upstream when you have uncommitted local changes?). The cause of the
change in colourization is that previously, the short upstream state
indicator appeared immediately after the rebase/revert/bisect/merge
state indicator (note the position of $p in $gitstring):
local f="$h$w$i$s$u"
local gitstring="$c$b${f:+$z$f}${sparse}$r$p"
Said indicator is prepended with the clear colour code, and the short
upstream state indicator is thus also uncoloured. Now, the short
upstream state indicator follows the sequence of colourized indicators,
without any clearing of colour (again note the position of $p, now in
$f):
local f="$h$w$i$s$u$p"
local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}"
If the user is in a sparse checkout, the sparsity state indicator
follows a similar pattern to the short upstream state indicator.
However, clearing colour of the colourized indicators changes how the
sparsity state indicator is colourized, as it currently inherits (and
before the change referenced also inherited) the colour of the last
short state indicator before it. Reading the commit message of the
change that introduced the sparsity state indicator, afda36dbf3
(git-prompt: include sparsity state as well, 2020-06-21), it appears
this colourization also was unintended, so clearing the colour for said
indicator further increases consistency.
Make the colourization of these state indicators consistent by making
all colourized indicators clear their own colour. Make colouring of $c
dependent on it not being empty, as it is no longer being used to colour
the branch name. Move clearing of $b's prefix to before colourization so
it gets cleared properly when colour codes are inserted into it. These
changes make changing the layout of the prompt less prone to unintended
colour changes in the future.
Change coloured Bash prompt tests to reflect the colourization changes:
* Move the colour codes to wrap the expected content of the expanded
$__git_ps1_branch_name in all tests.
* Insert a clear-colour code after the symbol for the first indicator
in "prompt - bash color pc mode - dirty status indicator - dirty
index and worktree", to reflect that all indicators should clear
their own colour.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating at the scale that Scalar wants to support, certain data
shapes are more likely to cause undesirable performance issues, such as
large numbers of loose objects.
By including statistics about this, `scalar diagnose` now makes it
easier to identify such scenarios.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's helpful to see if there are other crud files in the pack
directory. Let's teach the `scalar diagnose` command to gather
file size information about pack files.
While at it, also enumerate the pack files in the alternate
object directories, if any are registered.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When analyzing problems with large worktrees/repositories, it is useful
to know how close to a "full disk" situation Scalar/Git operates. Let's
include this information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the course of Scalar's development, it became obvious that there is
a need for a command that can gather all kinds of useful information
that can help identify the most typical problems with large
worktrees/repositories.
The `diagnose` command is the culmination of this hard-won knowledge: it
gathers the installed hooks, the config, a couple statistics describing
the data shape, among other pieces of information, and then wraps
everything up in a tidy, neat `.zip` archive.
Note: originally, Scalar was implemented in C# using the .NET API, where
we had the luxury of a comprehensive standard library that includes
basic functionality such as writing a `.zip` file. In the C version, we
lack such a commodity. Rather than introducing a dependency on, say,
libzip, we slightly abuse Git's `archive` machinery: we write out a
`.zip` of the empty try, augmented by a couple files that are added via
the `--add-file*` options. We are careful trying not to modify the
current repository in any way lest the very circumstances that required
`scalar diagnose` to be run are changed by the `diagnose` run itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `scalar` command needs a Scalar enlistment for many subcommands, and
looks in the current directory for such an enlistment (traversing the
parent directories until it finds one).
These is subcommands can also be called with an optional argument
specifying the enlistment. Here, too, we traverse parent directories as
needed, until we find an enlistment.
However, if the specified directory does not even exist, or is not a
directory, we should stop right there, with an error message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create another thread to watch over the daemon process and
automatically shut it down if necessary.
This commit creates the basic framework for a "health" thread
to monitor the daemon and/or the file system. Later commits
will add platform-specific code to do the actual work.
The "health" thread is intended to monitor conditions that
would be difficult to track inside the IPC thread pool and/or
the file system listener threads. For example, when there are
file system events outside of the watched worktree root or if
we want to have an idle-timeout auto-shutdown feature.
This commit creates the health thread itself, defines the thread-proc
and sets up the thread's event loop. It integrates this new thread
into the existing IPC and Listener thread models.
This commit defines the API to the platform-specific code where all of
the monitoring will actually happen.
The platform-specific code for MacOS is just stubs. Meaning that the
health thread will immediately exit on MacOS, but that is OK and
expected. Future work can define MacOS-specific monitoring.
The platform-specific code for Windows sets up enough of the
WaitForMultipleObjects() machinery to watch for system and/or custom
events. Currently, the set of wait handles only includes our custom
shutdown event (sent from our other theads). Later commits in this
series will extend the set of wait handles to monitor other
conditions.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend generic incompatibility checkout with platform-specific
mechanism. Stub in Win32 version.
In the existing fsmonitor-settings code we have a way to mark
types of repos as incompatible with fsmonitor (whether via the
hook and IPC APIs). For example, we do this for bare repos,
since there are no files to watch.
Extend this exclusion mechanism for platform-specific reasons.
This commit just creates the framework and adds a stub for Win32.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`UNICODE` and `_UNICODE` are not required when building git on Windows.
Actually, they should not be predefined at all.
There're 2 evidences that `(_)UNICODE` is supposed to be nonexist:
compat/win32/trace2_win32_process_info.c:83: It uses jw_array_string
which accepts pe32.szExeFile as const char*.
t/helper/test-drop-caches.c:16: Calling to GetCurrentDirectory with
Buffer as char*.
The autotools build system never defines `UNICODE` and `_UNICODE` and
builds on Windows well.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix one of the TODOs listed in the CMakeLists.txt by adding support
for building with pcre2.
As pcre2 doesn't provide cmake find module, we find it with pkgconf.
This patch also works with vcpkg on Windows, with pkgconf and pcre2
installed.
Pkgconf and pcre2 is detected automatically just like curl, expat
and iconv. The output of CMake indicates whether pcre2 is found.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CMakeLists.txt didn't follow the grammar of `set`, and it will fail when
setting `USE_VCPKG` off on non-Windows platforms.
When the platform is Linux, the Makefile adds `compat/linux/procinfo.o`
to `COMPAT_OBJS`, but the CMakeLists.txt didn't add
`compat/linux/procinfo.c` to `compat_SOURCES`. It would cause linkage
error.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Add a coccinelle semantic patch necessary to reinforce the git coding style
guideline:
"Do not explicitly compute an integral value with constant 0 or '\ 0', or a
pointer value with constant NULL."
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13092a91 (cocci: refactor common patterns to use xstrdup_or_null(),
2016-10-12) introduced a rule to rewrite this conditional call to
xstrdup(E) and an assignment to variable V:
- if (E)
- V = xstrdup(E);
into an unconditional call to xstrdup_or_null(E) and an assignment
to variable V:
+ V = xstrdup_or_null(E);
which is utterly bogus. The original code may already have an
acceptable value in V and the conditional assignment may be to
improve the value already in V with a copy of a better value E when
(and only when) E is not NULL.
The rewritten construct unconditionally discards the existing value
of V and replaces it with a copy of E, even when E is NULL, which
changes the meaning of the program.
By the way, if it were
-if (E && !V)
- V = xstrdup(E);
+V = xstrdup_or_null(E);
it would probably have been correct. But there is no existing code
that would have been improved by such a rule, so let's just remove
the bogus one without replacing with the more specific one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply coccinelle rules to remove "if (E)" before
"free_commit_list(E)", the function can accept NULL, and further
change cases where "E = NULL" followed to also be unconditionally.
The code changes in this commit were entirely made by the coccinelle
rule being added here, and applied with:
make contrib/coccinelle/free.cocci.patch
patch -p1 <contrib/coccinelle/free.cocci.patch
The only manual intervention here is that the the relevant code in
commit.c has been manually re-indented.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The externalConsole=true setting is broken for many users (launching the
debugger with such setting results in VS Code waiting forever without
actually starting the debugger). Also, this setting is a matter of user
preference, and is arguably better set in a "launch" section in the
user-wide settings.json than hardcoded in our script. Remove the line to
use VS Code's default, or the user's setting.
Add useful links in contrib/vscode/README.md to help the user to
configure VS Code and how to use the debugging feature.
Helped-by: Matthieu Moy <Matthieu.Moy@univ-lyon1.fr>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A micro fix to a topic earlier merged to 'master'
source: <patch-1.1-05949221e3f-20220319T002715Z-avarab@gmail.com>
* ab/make-optim-noop:
contrib/scalar: fix 'all' target in Makefile
Documentation/Makefile: fix "make info" regression in dad9cd7d51
Add extra ':' to second 'all' target definition to allow 'scalar' to build.
Without this fix, the 'all:' and 'all::' targets together cause a build
failure when 'scalar' build is enabled with 'INCLUDE_SCALAR':
Makefile:14: *** target file `all' has both : and :: entries. Stop.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
These macros were last used in 5d3679ee02 (sha1-file: drop
has_sha1_file(), 2019-01-07), so let's remove coccinelle migration
rules added 9b45f49981 (object-store: prepare has_{sha1, object}_file
to handle any repo, 2018-11-13), along with the compatibility macros
themselves.
The "These functions.." in the diff context and the general comment
about compatibility macros still applies to
"NO_THE_REPOSITORY_COMPATIBILITY_MACROS" use just a few lines below
this, so let's keep the comment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>