"git clone --local" stops copying from an original repository that
has symbolic links inside its $GIT_DIR; an error message when that
happens has been updated.
* gc/better-error-when-local-clone-fails-with-symlink:
clone: error specifically with --local and symlinked objects
"git mergetool" and "git difftool" learns a new configuration
guiDefault to optionally favor configured guitool over non-gui-tool
automatically when $DISPLAY is set.
* tk/mergetool-gui-default-config:
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY
Consistently spell "Message-ID" as such, not "Message-Id".
* jc/spell-id-in-both-caps-in-message-id:
e-mail workflow: Message-ID is spelled with ID in both capital letters
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hacks to add version information to the man pages comes from 2007
7ef195ba3e (Documentation: Add version information to man pages,
2007-03-25). In that code we passed three fields to DocBook Stylesheets:
`source`, `version`, and `manual`, however, all the stylesheets do is
join the strings `source` and `version` [1].
Their own documentation explains that in pracice the source is just a
combination of two fields [2]:
In practice, there are many pages that simply have a version number in
the "source" field.
Splitting that information might have seemed more proper in 2007, but it
not achieve anything in practice.
Asciidoctor had support for this information in their manpage backend
since day 1: v1.5.3 (2015), but it didn't include the version. In the
docbook5 backend they did in v1.5.7 (2018), but again: no version.
There is no need for us to demand that that they add support for the
version field when in reality all that is going to happen is that both
fields are going to be joined.
Let's do that ourselves so we can forget about all our hacks for this
and so it works for both asciidoc.py, and docbook5 and manpage backends
of asciidoctor.
[1] https://github.com/docbook/xslt10-stylesheets/blob/master/xsl/common/refentry.xsl#L545
[2] https://docbook.sourceforge.net/release/xsl/current/doc/common/template.get.refentry.source.html
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The HTML version of MyFirstContribution [1] does not render the
asterisks (*) meant to be typed in as glob patterns by the user, because
they are being interpreted as bold text delimiters.
[1]: Search for "pattern" in
https://git-scm.com/docs/MyFirstContribution#v2-git-send-email
Signed-off-by: Linus Arver <linusa@google.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref" learns '%(ahead-behind:<base>)' that computes the
distances from a single reference point in the history with bunch
of commits in bulk.
* ds/ahead-behind:
commit-reach: add tips_reachable_from_bases()
for-each-ref: add ahead-behind format atom
commit-reach: implement ahead_behind() logic
commit-graph: introduce `ensure_generations_valid()`
commit-graph: return generation from memory
commit-graph: simplify compute_generation_numbers()
commit-graph: refactor compute_topological_levels()
for-each-ref: explicitly test no matches
for-each-ref: add --stdin option
In 2007 we added a custom header macro to provide version information
7ef195ba3e (Documentation: Add version information to man pages,
2007-03-25),
However, in 2008 asciidoc added the attributes to do this properly [1].
This was not implemented in Git until 2019: 226daba280 (Doc/Makefile:
give mansource/-version/-manual attributes, 2019-09-16).
But in 2023 we are doing it properly, so there's no need for the custom
macro.
[1] https://github.com/asciidoc-py/asciidoc-py/commit/ad78a3c
Cc: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no merge.tool or diff.tool is configured or manually selected, the
selection of a default tool is sensitive to the DISPLAY variable; in a
GUI session a gui-specific tool will be proposed if found, and
otherwise a terminal-based one. This "GUI-optimizing" behavior is
important because a GUI can make a huge difference to a user's ability
to understand and correctly complete a non-trivial conflicting merge.
Some time ago the merge.guitool and diff.guitool config options were
introduced to enable users to configure both a GUI tool, and a non-GUI
tool (with fallback if no GUI tool configured), in the same environment.
Unfortunately, the --gui argument introduced to support the selection of
the guitool is still explicit. When using configured tools, there is no
equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI
environment" behavior.
As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration
options, difftool.guiDefault and mergetool.guiDefault, supporting a special
value "auto" which causes the corresponding tool or guitool to be selected
depending on the presence of a non-empty DISPLAY value. Also support "true"
to say "default to the guitool (unless --no-gui is passed on the
commandline)", and "false" as the previous default behavior when these new
configuration options are not specified.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the word "the", the sentence is a little harder to read. The
word "the" makes it clearer that the comment refers to discrete patches,
and not portions of individual patches.
Signed-off-by: Daniel Watson <ozzloy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 50d9bbba92 (Documentation: Avoid use of xmlto --stringparam,
2009-12-04) introduced manpage-base-url.xsl because ancient versions of
xmlto did not have --stringparam.
However, that was more than ten years ago, no need for that complexity
anymore, we can just use --stringparam.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document what the pathname-looking strings in "rev-list --object"
output are for and what they mean.
* jk/document-rev-list-object-name:
docs: document caveats of rev-list's object-name output
"git blame --contents=<file> <rev> -- <path>" used to be forbidden,
but now it finds the origins of lines starting at <file> contents
through the history that leads to <rev>.
* jk/blame-contents-with-arbitrary-commit:
blame: allow --contents to work with non-HEAD commit
Streamline --rebase-merges command line option handling and
introduce rebase.merges configuration variable.
* ah/rebase-merges-config:
rebase: add a config option for --rebase-merges
rebase: deprecate --rebase-merges=""
rebase: add documentation and test for --no-rebase-merges
We used to write "Message-Id:" and "Message-ID:" pretty much
interchangeably, and the header name is defined to be case
insensitive by the RFCs, but the canonical form "Message-ID:" is
used throughout the RFC documents, so let's imitate it ourselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Running the command itself has generated a warning for several versions,
which has recently been upgraded to an error. Let's also make sure the
documentation mentions what is going on. This also gives us a good spot
to explain the reasoning and recommend alternatives.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At first glance, the names given by "rev-list --objects" seem like a
good way to see which paths are present in a set of commits. But there
are some subtle gotchas there. We do not document the format of the
names at all, so let's do so, along with warning of these problems.
I intentionally did not document the exact format of the names here, as
I don't think it's something we want people to rely on (though I doubt
in practice that we'd change it at this point).
Though all of this is historically tied to "--objects", these days we
have a separate "--object-names" flag which can turn the names off or
on. So I put the detailed documentation there, but added a note from
--objects (which did not otherwise mention the names at all, even though
they are on by default).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove workaround for ancient versions of DocBook to make it work
correctly with groff, which has not been necessary since docbook
1.76 from 2010.
* fc/docbook-remove-groff-workaround:
doc: remove GNU troff workaround
There exists no direct way to interrogate git about which paths are
matched by a given set of sparsity rules. It is possible to get this
information from git, but it includes checking out the commit that
contains the paths, applying the sparse checkout patterns and then using
something like 'git ls-files -t' to check if the skip worktree bit is
set. This works in some case, but there are cases where it is awkward or
infeasible to generate a checkout for this purpose.
Exposing the pattern matching of sparse checkout enables more tooling to
be built and avoids a situation where tools that want to reason about
sparse checkouts start containing parallel implementation of the rules.
To accommodate this, add a 'check-rules' subcommand to the
'sparse-checkout' builtin along the lines of the 'git check-ignore' and
'git check-attr' commands. The new command accepts a list of paths on
stdin and outputs just the ones the match the sparse checkout.
To allow for use in a bare repository and to allow for interrogating
about other patterns than the current ones, include a '--rules-file'
option which allows the caller to explicitly pass sparse checkout rules
in the format accepted by 'sparse-checkout set --stdin'.
To allow for reuse of the handling of input patterns for the
'--rules-file' flag, modify 'add_patterns_from_input()' to be able to
read from a 'FILE' instead of just stdin.
To allow for reuse of the logic which decides whether or not rules
should be interpreted as cone-mode patterns, split that part out of
'update_modes()' such that can be called without modifying the config.
An alternative could have been to create a new 'check-sparsity' command.
However, placing it under 'sparse-checkout' allows for a) more easily
re-using the sparse checkout pattern matching and cone/non-code mode
handling, and b) keeps the documentation for the command next to the
experimental warning and the cone-mode discussion.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as I can tell, --no-rebase-merges has always worked, but has
never been documented. It is especially important to document it before
a rebase.rebaseMerges option is introduced so that users know how to
override the config option on the command line. It's also important to
clarify that --rebase-merges without an argument is not the same as
--no-rebase-merges and not passing --rebase-merges is not the same as
passing --rebase-merges=no-rebase-cousins.
A test case is necessary to make sure that --no-rebase-merges keeps
working after its code is refactored in the following patches of this
series. The test case is a little contrived: It's unlikely that a user
would type both --rebase-merges and --no-rebase-merges at the same time.
However, if an alias is defined which includes --rebase-merges, the user
might decide to add --no-rebase-merges to countermand that part of the
alias but leave alone other flags set by the alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --contents option can be used with git blame to blame the file as if
it had the contents from the specified file. This is akin to copying the
contents into the working tree and then running git blame. This option
has been supported since 1cfe77333f ("git-blame: no rev means start
from the working tree file.")
The --contents option always blames the file as if it was based on the
current HEAD commit. If you try to pass a revision while using
--contents, you get the following error:
fatal: cannot use --contents with final commit object name
This is because the blame process generates a fake working tree commit
which always uses the HEAD object as its sole parent.
Enhance fake_working_tree_commit to take the object ID to use for the
parent instead of always using the HEAD object. Then, always generate a
fake commit when we have contents provided, even if we have a final
object. Remove the check to disallow --contents and a final revision.
Note that the behavior of generating a fake working commit is still
skipped when a revision is provided but --contents is not provided.
Generating such a commit in that case would combine the currently
checked out file contents with the provided revision, which breaks
normal blame behavior and produces unexpected results.
This enables use of --contents with an arbitrary revision, rather than
forcing the use of the local HEAD commit. This makes the --contents
option significantly more flexible, as it is no longer required to check
out the working tree to the desired commit before using --contents.
Reword the documentation so that its clear that --contents can be used
with <rev>.
Add tests for the --contents option to the annotate-tests.sh test
script.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
There were two reasons we didn't do this. As "git am" is designed
to grok e-mailed patches, not necessarily taken out of a Git
repostiory or even if it came from a Git repository not necessarily
produced with format-patch, we didn't want to single it out as the
"blessed" input producer to the command. Also, in the original
workflow that "git am" was invented for, the user of "am" was
expected to be a different person than the users of "format-patch".
But this is a very safe change to make in 2023. Thanks to the
effort by many contributors, Git ended up becoming a bit more
popular than we initially thought it would be, and "format-patch",
which took me a few weeks to pursuade Linus to take in 2005, seems
to have become the de-facto standard tool to produce patch e-mails.
Interestingly, the documentation for "git apply", which is listed in
SEE ALSO section of "git am" documentation, does mention "am" and
"format-patch" as two things that are related but different from
"apply" in an early part.
Suggested-by: Kai Grossjohann <kai.grossjohann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2007 the docbook project made the mistake of converting ' to \' for
man pages [1]. It's a problem because groff interprets \' as acute
accent which is rendered as ' in ASCII, but as ´ in utf-8.
This started a cascade of bug reports in git [2], debian [3], Arch Linux
[4], docbook itself [5], and probably many others.
A solution was to use the correct groff character: \(aq, which is always
rendered as ', but the problem is that such character doesn't work in
other troff programs.
A portable solution required the use of a conditional character that is
\(aq in groff, but ' in all others:
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
The proper solution took time to be implemented in docbook, but in 2010
they did it [6]. So the docbook man page stylesheets were broken from
1.73 to 1.76.
Unfortunately by that point many workarounds already existed. In the
case of git, GNU_ROFF was introduced, and in the case of Arch Linux
a mapping from \' to ' was added to groff's man.local. Other
distributions might have done the same, or similar workarounds.
Since 2010 there is no need for this workaround, which is fixed
elsewhere, not just in docbook, but other layers as well.
Let's remove it.
[1] ea2a0bac56
[2] https://lore.kernel.org/git/20091012102926.GA3937@debian.b2j/
[3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507673#65
[4] https://bugs.archlinux.org/task/9643
[5] https://sourceforge.net/p/docbook/bugs/1022/
[6] fb55343426
Inspired-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user wishes to input a large list of patterns to 'git
for-each-ref' (likely a long list of exact refs) there are frequently
system limits on the number of command-line arguments.
Add a new --stdin option to instead read the patterns from standard
input. Add tests that check that any unrecognized arguments are
considered an error when --stdin is provided. Also, an empty pattern
list is interpreted as the complete ref set.
When reading from stdin, we populate the filter.name_patterns array
dynamically as opposed to pointing to the 'argv' array directly. This is
simple when using a strvec, as it is NULL-terminated in the same way. We
then free the memory directly from the strvec.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "git pull" that is configured with pull.rebase=false
merge.ff=only fails due to our end having our own development, give
advice messages to get out of the "Not possible to fast-forward"
state.
* fc/advice-diverged-history:
advice: add diverging advice for novices
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
