* maint-2.16:
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.15:
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.14:
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
There are a few reasons it's not a good idea to make
.gitmodules a symlink, including:
1. It won't be portable to systems without symlinks.
2. It may behave inconsistently, since Git may look at
this file in the index or a tree without bothering to
resolve any symbolic links. We don't do this _yet_, but
the config infrastructure is there and it's planned for
the future.
With some clever code, we could make (2) work. And some
people may not care about (1) if they only work on one
platform. But there are a few security reasons to simply
disallow it:
a. A symlinked .gitmodules file may circumvent any fsck
checks of the content.
b. Git may read and write from the on-disk file without
sanity checking the symlink target. So for example, if
you link ".gitmodules" to "../oops" and run "git
submodule add", we'll write to the file "oops" outside
the repository.
Again, both of those are problems that _could_ be solved
with sufficient code, but given the complications in (1) and
(2), we're better off just outlawing it explicitly.
Note the slightly tricky call to verify_path() in
update-index's update_one(). There we may not have a mode if
we're not updating from the filesystem (e.g., we might just
be removing the file). Passing "0" as the mode there works
fine; since it's not a symlink, we'll just skip the extra
checks.
Signed-off-by: Jeff King <peff@peff.net>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in "git apply" knew that "/dev/null" that signals
"there is no such file on this side of the diff" can be followed by
whitespace and garbage when parsing a patch, except for one, which
made an otherwise valid patch (e.g. ones from subversion) rejected.
* tk/apply-dev-null-verify-name-fix:
apply: handle Subversion diffs with /dev/null gracefully
apply: demonstrate a problem applying svn diffs
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion generates diffs that can contain lines like this one:
--- /dev/null (nonexistent)
Let's teach Git's apply machinery to handle such a line gracefully.
This fixes https://github.com/git-for-windows/git/isues/1489
Signed-off-by: Tatyana Krasnukha <tatyana@synopsys.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--3way
--allow-overlap
--build-fake-ancestor=
--directory
--exclude
--include
--index-info is no longer completable but that's because it's renamed to
--build-fake-ancestor in 26b2800768 (apply: get rid of --index-info in
favor of --build-fake-ancestor - 2007-09-17)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the definition and declaration of write_sha1_file to
struct object_id and adjust usage of this function.
This commit also converts static function write_sha1_file_prepare, as it
is closely related.
Rename these functions to write_object_file and
write_object_file_prepare respectively.
Replace sha1_to_hex, hashcpy and hashclr with their oid equivalents
wherever possible.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling convert_to_git(), the checksafe parameter defined what
should happen if the EOL conversion (CRLF --> LF --> CRLF) does not
roundtrip cleanly. In addition, it also defined if line endings should
be renormalized (CRLF --> LF) or kept as they are.
checksafe was an safe_crlf enum with these values:
SAFE_CRLF_FALSE: do nothing in case of EOL roundtrip errors
SAFE_CRLF_FAIL: die in case of EOL roundtrip errors
SAFE_CRLF_WARN: print a warning in case of EOL roundtrip errors
SAFE_CRLF_RENORMALIZE: change CRLF to LF
SAFE_CRLF_KEEP_CRLF: keep all line endings as they are
In some cases the integer value 0 was passed as checksafe parameter
instead of the correct enum value SAFE_CRLF_FALSE. That was no problem
because SAFE_CRLF_FALSE is defined as 0.
FALSE/FAIL/WARN are different from RENORMALIZE and KEEP_CRLF. Therefore,
an enum is not ideal. Let's use a integer bit pattern instead and rename
the parameter to conv_flags to make it more generically usable. This
allows us to extend the bit pattern in a subsequent commit.
Reported-By: Randall S. Becker <rsbecker@nexbridge.com>
Helped-By: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --inaccurate-eof" when used with "--ignore-space-change"
triggered an internal sanity check, which has been fixed.
* rs/apply-inaccurate-eof-with-incomplete-line:
apply: update line lengths for --inaccurate-eof
"git apply --inaccurate-eof" when used with "--ignore-space-change"
triggered an internal sanity check, which has been fixed.
* rs/apply-inaccurate-eof-with-incomplete-line:
apply: update line lengths for --inaccurate-eof
A fix for an ancient bug in "git apply --ignore-space-change" codepath.
* rs/apply-fuzzy-match-fix:
apply: avoid out-of-bounds access in fuzzy_matchlines()
A fix for an ancient bug in "git apply --ignore-space-change" codepath.
* rs/apply-fuzzy-match-fix:
apply: avoid out-of-bounds access in fuzzy_matchlines()
Some diff implementations don't report missing newlines at the end of
files. Applying such a patch can cause a newline character to be
added inadvertently. The option --inaccurate-eof of git apply can be
used to remove trailing newlines if needed.
apply_one_fragment() cuts it off from the buffers for preimage and
postimage. Before it does, it builds an array with the lengths of each
line for both. Make sure to update the length of the last line in
these line info structures as well to keep them consistent with their
respective buffer.
Without this fix the added test fails; git apply dies and reports:
fatal: BUG: caller miscounted postlen: asked 1, orig = 1, used = 2
That sanity check is only called if whitespace changes are ignored.
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fuzzy_matchlines() uses a pointers to the first and last characters of
two lines to keep track while matching them. This makes it impossible
to deal with empty strings. It accesses characters before the start of
empty lines. It can also access characters after the end when checking
for trailing whitespace in the main loop.
Avoid that by using pointers to the first character and the one *after*
the last one. This is well-defined as long as the latter is not
dereferenced. Basically rewrite the function based on that premise; it
becomes much simpler as a result. There is no need to check for
leading whitespace outside of the main loop anymore.
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to a previous patch, we do not need to use `newfd` to signal
that we have a lockfile to clean up. We can just unconditionally call
`rollback_lock_file`. If we do not hold the lock, it will be a no-op.
Where we check `newfd` to decide whether we need to take the lock, we
can instead use `is_lock_file_locked()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two users of `struct apply_state` and the related functionality
in apply.c. Each user sets up its `apply_state` by handing over a
pointer to its static `lock_file`. (Before 076aa2cbd (tempfile:
auto-allocate tempfiles on heap, 2017-09-05), we could never free
lockfiles, so making them static was a reasonable approach.)
Other than that, they never directly access their `lock_file`s, which
are instead handled by the functionality in apply.c.
To make life easier for the caller and to make it less tempting for a
future caller to mess with the lock, make apply.c fully responsible for
setting up the `lock_file`. As mentioned above, it is now safe to free a
`lock_file`, so we can make the `struct apply_state` contain an actual
`struct lock_file` instead of a pointer to one.
The user in builtin/apply.c is rather simple. For builtin/am.c, we might
worry that the lock state is actually meant to be inherited across
calls. But the lock is only taken as `apply_all_patches()` executes, and
code inspection shows that it will always be released.
Alternatively, we can observe that the lock itself is never queried
directly. When we decide whether we should lock, we check a related
variable `newfd`. That variable is not inherited, so from the point of
view of apply.c, the state machine really is reset with each call to
`init_apply_state()`. (It would be a bug if `newfd` and the lock status
were not in sync. The duplication of information in `newfd` and the lock
will be addressed in the next patch.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" that is used as a better "patch -p1" failed to apply a
taken from a file with CRLF line endings to a file with CRLF line
endings. The root cause was because it misused convert_to_git()
that tried to do "safe-crlf" processing by looking at the index
entry at the same path, which is a nonsense---in that mode, "apply"
is not working on the data in (or derived from) the index at all.
This has been fixed.
* tb/apply-with-crlf:
apply: file commited with CRLF should roundtrip diff and apply
convert: add SAFE_CRLF_KEEP_CRLF
"git apply" that is used as a better "patch -p1" failed to apply a
taken from a file with CRLF line endings to a file with CRLF line
endings. The root cause was because it misused convert_to_git()
that tried to do "safe-crlf" processing by looking at the index
entry at the same path, which is a nonsense---in that mode, "apply"
is not working on the data in (or derived from) the index at all.
This has been fixed.
* tb/apply-with-crlf:
apply: file commited with CRLF should roundtrip diff and apply
convert: add SAFE_CRLF_KEEP_CRLF
We check the date of epoch timestamp candidates already with
starts_with(). Move beyond that part using skip_prefix() instead of
checking it again using a regular expression. Also group the minutes
part, so that we can access them using a substring match instead of
using a magic number.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
has_epoch_timestamp() looks for time stamps that amount to either
1969-12-31 24:00 or 1970-01-01 00:00 after applying the time zone
offset. Move the check for these two dates up, set the expected hour
based on which one is found, or exit early if none of them are present,
thus avoiding to engage the regex machinery for newer dates.
This also gets rid of two magic string length constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file had been commited with CRLF but now .gitattributes say
"* text=auto" (or core.autocrlf is true), the following does not
roundtrip, `git apply` fails:
printf "Added line\r\n" >>file &&
git diff >patch &&
git checkout -- . &&
git apply patch
Before applying the patch, the file from working tree is converted
into the index format (clean filter, CRLF conversion, ...). Here,
when commited with CRLF, the line endings should not be converted.
Note that `git apply --index` or `git apply --cache` doesn't call
convert_to_git() because the source material is already in index
format.
Analyze the patch if there is a) any context line with CRLF, or b)
if any line with CRLF is to be removed. In this case the patch file
`patch` has mixed line endings, for a) it looks like this:
diff --git a/one b/one
index 533790e..c30dea8 100644
--- a/one
+++ b/one
@@ -1 +1,2 @@
a\r
+b\r
And for b) it looks like this:
diff --git a/one b/one
index 533790e..485540d 100644
--- a/one
+++ b/one
@@ -1 +1 @@
-a\r
+b\r
If `git apply` detects that the patch itself has CRLF, (look at the
line " a\r" or "-a\r" above), the new flag crlf_in_old is set in
"struct patch" and two things will happen:
- read_old_data() will not convert CRLF into LF by calling
convert_to_git(..., SAFE_CRLF_KEEP_CRLF);
- The WS_CR_AT_EOL bit is set in the "white space rule",
CRLF are no longer treated as white space.
While at there, make it clear that read_old_data() in apply.c knows
what it wants convert_to_git() to do with respect to CRLF. In fact,
this codepath is about applying a patch to a file in the filesystem,
which may not exist in the index, or may exist but may not match
what is recorded in the index, or in the extreme case, we may not
even be in a Git repository. If convert_to_git() peeked at the
index while doing its work, it *would* be a bug.
Pass NULL instead of &the_index to convert_to_git() to make sure we
catch future bugs to clarify this.
Update the test in t4124: split one test case into 3:
- Detect the " a\r" line in the patch
- Detect the "-a\r" line in the patch
- Use LF in repo and CLRF in the worktree.
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
Use a NULL-and-NUL check to see if we have a prefix and consistently use
C string functions on it instead of storing its length in a member of
struct apply_state. This avoids strlen() calls and simplifies the code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* rs/apply-avoid-over-reading:
apply: use strcmp(3) for comparing strings in gitdiff_verify_name()
apply: use starts_with() in gitdiff_verify_name()
Simplify the code by using the helper macros COPY_ARRAY and MOVE_ARRAY,
which also makes them more robust in the case we copy or move no lines,
as they allow using NULL points in that case, while memcpy(3) and
memmove(3) don't.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't know the length of the C string "another". It could be
shorter than "name", which we compare it to using memchr(3). Call
strcmp(3) instead to avoid running over the end of the former, and
get rid of a strlen(3) call as a bonus.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid running over the end of line -- a C string whose length is not
known to this function -- by using starts_with() instead of memcmp(3)
for checking if it starts with "/dev/null". Also simply include the
newline in the string constant to compare against. Drop a comment that
just states the obvious.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A file can either be added, removed, copied, or renamed, but no two of
these actions can be done by the same patch. Some of these combinations
provoke error messages due to missing file names, and some are only
caught by an assertion. Check git patches already as they are parsed
and report conflicting lines on sight.
Found by Vegard Nossum using AFL.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string as mode specification is accepted silently by git apply,
as Vegard Nossum found out using AFL. It's interpreted as zero. Reject
such bogus file modes, and only accept ones consisting exclusively of
octal digits.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
