The code writing JUnit XML is interspersed directly with all the code in
`t/test-lib.sh`, and it is therefore not only ill-separated, but
introducing yet another output format would make the situation even
worse.
Let's introduce an abstraction layer by hiding the JUnit XML code behind
four new functions that are supposed to be called before and after each
test and test case.
This is not just an academic exercise, refactoring for refactoring's
sake. We _actually_ want to introduce such a new output format, to
make it substantially easier to diagnose test failures in our GitHub
workflow, therefore we do need this refactoring.
This commit is best viewed with `git show --color-moved
--color-moved-ws=allow-indentation-change <commit>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b92cb86ea1 (travis-ci: check that all build artifacts are
.gitignore-d, 2017-12-31), a function was introduced with a code style
that is different from the surrounding code: it added the opening curly
brace on its own line, when all the existing functions in the same file
cuddle that brace on the same line as the function name.
Let's make the code style consistent again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
macOS CI jobs have been occasionally flaky due to tentative version
skew between perforce and the homebrew packager. Instead of
failing the whole CI job, just let it skip the p4 tests when this
happens.
* cb/ci-make-p4-optional:
ci: use https, not http to download binaries from perforce.com
ci: reintroduce prevention from perforce being quarantined in macOS
ci: avoid brew for installing perforce
ci: make failure to find perforce more user friendly
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
"git show :<path>" learned to work better with the sparse-index
feature.
* ds/sparse-colon-path:
rev-parse: integrate with sparse index
object-name: diagnose trees in index properly
object-name: reject trees found in the index
show: integrate with the sparse index
t1092: add compatibility tests for 'git show'
Teach "git stash" to work better with sparse index entries.
* vd/sparse-stash:
unpack-trees: preserve index sparsity
stash: apply stash using 'merge_ort_nonrecursive()'
read-cache: set sparsity when index is new
sparse-index: expose 'is_sparse_index_allowed()'
stash: integrate with sparse index
stash: expand sparse-checkout compatibility testing
"git bisect" was too silent before it is ready to start computing
the actual bisection, which has been corrected.
* cd/bisect-messages-from-pre-flight-states:
bisect: output bisect setup status in bisect log
bisect: output state before we are ready to compute bisection
"git pull" without "--recurse-submodules=<arg>" made
submodule.recurse take precedence over fetch.recurseSubmodules by
mistake, which has been corrected.
* gc/pull-recurse-submodules:
pull: do not let submodule.recurse override fetch.recurseSubmodules
Trace2 documentation updates.
* js/trace2-doc-fixes:
trace2 docs: add missing full stop
trace2 docs: clarify what `varargs` is all about
trace2 docs: fix a JSON formatted example
trace2 docs: surround more terms in backticks
trace2 docs: "printf" is not an English word
trace2 docs: a couple of grammar fixes
"git log --since=X" will stop traversal upon seeing a commit that
is older than X, but there may be commits behind it that is younger
than X when the commit was created with a faulty clock. A new
option is added to keep digging without stopping, and instead
filter out commits with timestamp older than X.
* mv/log-since-as-filter:
log: "--since-as-filter" option is a non-terminating "--since" variant
The temporary files fed to external diff command are now generated
inside a new temporary directory under the same basename.
* rs/external-diff-tempfile:
diff: use mks_tempfile_dt()
tempfile: add mks_tempfile_dt()
New tests for the safe.directory mechanism.
* sg/safe-directory-tests-and-docs:
safe.directory: document and check that it's ignored in the environment
t0033-safe-directory: check when 'safe.directory' is ignored
t0033-safe-directory: check the error message without matching the trash dir
Since 522354d70f (Add Travis CI support, 2015-11-27) the CI has used
http://filehost.perforce.com/perforce/ to download binaries from
filehost.perforce.com, they were then moved to this script in
657343a602 (travis-ci: move Travis CI code into dedicated scripts,
2017-09-10).
Let's use https instead for good measure. I don't think we need to
worry about the DNS or network between the GitHub CI and perforce.com
being MitM'd, but using https gives us extra validation of the payload
at least, and is one less thing to worry about when checking where
else we rely on non-TLS'd http connections.
Also, use the same download site at perforce.com for Linux and macOS
tarballs for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5ed9fc3fc8 (ci: prevent `perforce` from being quarantined, 2020-02-27)
introduces this prevention for brew, but brew has been removed in a
previous commit, so reintroduce an equivalent option to avoid a possible
regression.
This doesn't affect github actions (as configure now) and is therefore
done silently to avoid any possible scary irrelevant messages.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perfoce's cask in brew is meant[1] to be used only by humans, so replace
its use from the CI with a scripted binary download which is less likely
to fail, as it is done in Linux.
Kept the logic together so it will be less likely to break when moved
around as on the fly code changes in this area are settled, at which
point it will also feasable to ammend it to avoid some of the hardcoded
values by using similar variables to the ones Linux does.
In that same line, a POSIX sh syntax is used instead of the similar one
used in Linux in preparation for an unrelated future change that might
change the shell currently configured for it.
This change reintroduces the risk that the installed binaries might not
work because of being quarantined that was fixed with 5ed9fc3fc8 (ci:
prevent `perforce` from being quarantined, 2020-02-27) but fixing that
now was also punted for simplicity and since the affected cloud provider
is scheduled to be retired with an on the fly change, but should be
addressed if that other change is not integrated further.
The discussion on the need to keep 2 radically different versions of
the binaries to be tested with Linux vs macOS or how to upgrade to
newer versions now that brew won't do that automatically for us has
been punted for now as well. On that line the now obsolete comment
about it in lib.sh was originally being updated by this change but
created conflicts as it is moved around by other on the fly changes,
so will be addressed independently as well.
[1] https://github.com/Homebrew/homebrew-cask/pull/122347#discussion_r856026584
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future change that will make perforce installation
optional in macOS, make sure that the check for it is done without
triggering scary looking errors and add a user friendly message instead.
All other existing uses of 'type <cmd>' in our shell scripts that
check the availability of a command <cmd> send both standard output
and error stream to /dev/null to squelch "<cmd> not found" diagnostic
output, but this script left the standard error stream shown.
Redirect it just like everybody else to squelch this error message that
we fully expect to see.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in "git pull" where `submodule.recurse` is preferred over
`fetch.recurseSubmodules` when performing a fetch
(Documentation/config/fetch.txt says that `fetch.recurseSubmodules`
should be preferred.). Do this by passing the value of the
"--recurse-submodules" CLI option to the underlying fetch, instead of
passing a value that combines the CLI option and config variables.
In other words, this bug occurred because builtin/pull.c is conflating
two similar-sounding, but different concepts:
- Whether "git pull" itself should care about submodules e.g. whether it
should update the submodule worktrees after performing a merge.
- The value of "--recurse-submodules" to pass to the underlying "git
fetch".
Thus, when `submodule.recurse` is set, the underlying "git fetch" gets
invoked with "--recurse-submodules[=value]", overriding the value of
`fetch.recurseSubmodules`.
An alternative (and more obvious) approach to fix the bug would be to
teach "git pull" to understand `fetch.recurseSubmodules`, but the
proposed solution works better because:
- We don't maintain two identical config-parsing implementions in "git
pull" and "git fetch".
- It works better with other commands invoked by "git pull" e.g. "git
merge" won't accidentally respect `fetch.recurseSubmodules`.
Reported-by: Huang Zou <huang.zou@schrodinger.com>
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
Avoid problems from interaction between malloc_check and address
sanitizer.
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
This allows seeing the current intermediate status without adding a new
good or bad commit:
$ git bisect log | tail -1
# status: waiting for bad commit, 1 good commit known
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 73c6de06af ("bisect: don't use invalid oid as rev when
starting") changes the behaviour of `git bisect` to consider invalid
oids as pathspecs again, as in the old shell implementation.
While that behaviour may be desirable, it can also cause confusion. For
example, while bisecting in a particular repo I encountered this:
$ git bisect start d93ff48803f0 v6.3
$
...which led to me sitting for a few moments, wondering why there's no
printout stating the first rev to check.
It turns out that the tag was actually "6.3", not "v6.3", and thus the
bisect was still silently started with only a bad rev, because
d93ff48803f0 was a valid oid and "v6.3" was silently considered to be a
pathspec.
While this behaviour may be desirable, it can be confusing, especially
with different repo conventions either using or not using "v" before
release names, or when a branch name or tag is simply misspelled on the
command line.
In order to avoid situations like this, make it more clear what we're
waiting for:
$ git bisect start d93ff48803f0 v6.3
status: waiting for good commit(s), bad commit known
We already have good output once the bisect process has begun in
earnest, so we don't need to do anything more there.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6cd80496e9 ("gitk: Resize panes correctly when reducing window size",
2020-10-03) introduces a mechanism to record previously-set sash
positions to make sure that correct values are used while computing
resize proportions. However, if we are not using ttk, then sash
represents only the x coordinate and the recorded sash (`oldsash`) only
includes the x coordinate. When we need to access the y coordinate via
the recorded sash position, we generate the following Application Error
popup:
Error: expected integer but got ""
expected integer but got ""
expected integer but got ""
while executing
"$win sash place 0 $sash0 [lindex $s0 1]"
(procedure "resizeclistpanes" line 38)
invoked from within
"resizeclistpanes .tf.histframe.pwclist 2818"
(command bound to event)
To fix this, if we are not using ttk, we append the sash positions with
the y coordinates before recording them to match the use_ttk case.
Signed-off-by: Halil Sen <halil.sen@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The progress meter of "git blame" was showing incorrect numbers
when processing only parts of the file.
* ea/progress-partial-blame:
blame: report correct number of lines in progress when using ranges
Reimplement "vimdiff[123]" mergetool drivers with a more generic
layout mechanism.
* fr/vimdiff-layout:
mergetools: add description to all diff/merge tools
vimdiff: add tool documentation
vimdiff: integrate layout tests in the unit tests framework ('t' folder)
vimdiff: new implementation with layout support
Various cleanups to "git p4".
* jh/p4-various-fixups: (22 commits)
git-p4: sort imports
git-p4: seperate multiple statements onto seperate lines
git-p4: move inline comments to line above
git-p4: only seperate code blocks by a single empty line
git-p4: compare to singletons with "is" and "is not"
git-p4: normalize indentation of lines in conditionals
git-p4: ensure there is a single space around all operators
git-p4: ensure every comment has a single #
git-p4: remove spaces between dictionary keys and colons
git-p4: remove redundant backslash-continuations inside brackets
git-p4: remove extraneous spaces before function arguments
git-p4: place a single space after every comma
git-p4: removed brackets when assigning multiple return values
git-p4: remove spaces around default arguments
git-p4: remove padding from lists, tuples and function arguments
git-p4: sort and de-duplcate pylint disable list
git-p4: remove commented code
git-p4: convert descriptive class and function comments into docstrings
git-p4: improve consistency of docstring formatting
git-p4: indent with 4-spaces
...
