While it's good to have several examples to solidify the output pattern
and generally demonstrate how to use the command, most other EXAMPLES
sections (e.g., git-show-branch.txt, git-remote.txt) additionally
describe the problem/situation to which the example is applicable.
Follow this example in the ls-remote documentation.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without `--refs`, this command will show peeled tags. Make this clearer
in the examples to further mitigate the possibility of surprises in
consuming scripts.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --tags option is already demonstrated in the later example that
lists version-patterned tags. As it doesn't appear to add anything to
the documentation, it ought to be removed to keep the documentation
easier to read.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The glossary defines 'ref' as the official name of the thing,
and the output from "git grep -e '<ref' Documentation/" shows
that most everybody uses <ref>, not <reference>. In addition,
the page already says <ref> in its SYNOPSIS section for the
command when it is used in the mode to follow the reflogs.
Strictly speaking, many references of these should be updated to
<commit> after adding an explanation on how these <commit>s are
discovered (i.e. we take <rev>, <glob>, or <ref> and starting from
these commits, follow their ancestry or reflog entries to list
commits), but that would be a lot bigger change I would rather not
to do in this patch, whose primary purpose is to make the existing
documentation more consistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Use inline-code syntax for options where appropriate.
- Use code blocks to clarify output format.
- Use 'OID' (for 'object ID') instead of 'SHA-1' as we support
different hashing algorithms these days.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may allocate a message-id string via gen_message_id(), but we never
free it, causing a small leak. This can be demonstrated by running t9001
with a leak-checking build. The offending test is the one touched by
3ece9bf0f9 (send-email: clear the $message_id after validation,
2023-05-17), but the leak is much older than that. The test was simply
unlucky enough to trigger the leaking code path for the first time.
We can fix this by freeing the string at the end of the function. We can
also re-mark the test script as leak-free, effectively reverting
20bd08aefb (t9001: mark the script as no longer leak checker clean,
2023-05-17).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 988aad99b4 (t5563: add tests for basic and anoymous HTTP access,
2023-02-27) added tests that require Apache to support the CGIPassAuth
directive, which was added in Apache 2.4.13. This is fairly old (~8
years), but recent enough that we still encounter it in the wild (e.g.,
RHEL/CentOS 7, which is not EOL until June 2024).
We can live with skipping the new tests on such a platform. But
unfortunately, since the directive is used unconditionally in our
apache.conf, it means the web server fails to start entirely, and we
cannot run other HTTP tests at all (e.g., the basic ones in t5551).
We can fix that by making the config conditional, and only triggering it
for t5563. That solves the problem for t5551 (which then ignores the
directive entirely). For t5563, we'd see apache complain in start_httpd;
with the default setting of GIT_TEST_HTTPD, we'd then skip the whole
script.
But that leaves one small problem: people may set GIT_TEST_HTTPD=1
explicitly, which instructs the tests to fail (rather than skip) when we
can't start the webserver (to avoid accidentally missing some tests).
This could be worked around by having the user manually set
GIT_SKIP_TESTS on a platform with an older Apache. But we can be a bit
friendlier by doing the version check ourselves and setting an
appropriate prereq. We'll use the (lack of) prereq to then skip the rest
of t5563. In theory we could use the prereq to skip individual tests, but
in practice this whole script depends on it.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index is read in 'cmd_diff_tree' at two points:
1. The first index read was added in fd66bcc31f (diff-tree: read the
index so attribute checks work in bare repositories, 2017-12-06) to deal
with reading '.gitattributes' content. 77efbb366a (attr: be careful
about sparse directories, 2021-09-08) established that, in a sparse
index, we do _not_ try to load a '.gitattributes' file from within a
sparse directory.
2. The second index access point is involved in rename detection,
specifically when reading from stdin.This was initially added in
f0c6b2a2fd ([PATCH] Optimize diff-tree -[CM]--stdin, 2005-05-27), where
'setup' was set to 'DIFF_SETUP_USE_SIZE_CACHE |DIFF_SETUP_USE_CACHE'.
That assignment was later modified to drop the'DIFF_SETUP_USE_CACHE' in
ff7fe37b05 (diff.c: move read_index() code back to the caller,
2018-08-13).However, 'DIFF_SETUP_USE_SIZE_CACHE' seems to be unused as
of 6e0b8ed6d3 (diff.c: do not use a separate "size cache"., 2007-05-07)
and nothing about 'detect_rename' otherwise indicates index usage.
Hence we can just set the requires-full-index to false for "diff-tree".
Add tests that verify that 'git diff-tree' behaves correctly when the
sparse index is enabled and test to ensure the index is not expanded.
The `p2000` tests demonstrate a ~98% execution time reduction for
'git diff-tree' using a sparse index:
Test before after
-----------------------------------------------------------------------
2000.94: git diff-tree HEAD (full-v3) 0.05 0.04 -20.0%
2000.95: git diff-tree HEAD (full-v4) 0.06 0.05 -16.7%
2000.96: git diff-tree HEAD (sparse-v3) 0.59 0.01 -98.3%
2000.97: git diff-tree HEAD (sparse-v4) 0.61 0.01 -98.4%
2000.98: git diff-tree HEAD -- f2/f4/a (full-v3) 0.05 0.05 +0.0%
2000.99: git diff-tree HEAD -- f2/f4/a (full-v4) 0.05 0.04 -20.0%
2000.100: git diff-tree HEAD -- f2/f4/a (sparse-v3) 0.58 0.01 -98.3%
2000.101: git diff-tree HEAD -- f2/f4/a (sparse-v4) 0.55 0.01 -98.2%
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses "format-patch --thread" which is known to leak the
generated message ID list.
Plugging these leaks involves straightening out the memory ownership
rules around rev_info.message_id and rev_info.ref_message_ids, and
is beyond the scope of send-email fix, so for now mark the test as
leaky to unblock the topic before the release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently git-send-email started parsing the same message twice, once
to validate _all_ the message before sending even the first one, and
then after the validation hook is happy and each message gets sent,
to read the contents to find out where to send to etc.
Unfortunately, the effect of reading the messages for validation
lingered even after the validation is done. Namely $message_id gets
assigned if exists in the input files but the variable is global,
and it is not cleared before pre_process_file runs. This causes
reading a message without a message-id followed by reading a message
with a message-id to misbehave---the sub reports as if the message
had the same id as the previously written one.
Clear the variable before starting to read the headers in
pre_process_file.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning an empty repository, protocol versions 0 and 1 currently
offer nothing but the header and flush packets for the /info/refs
endpoint. This means that no capabilities are provided, so the client
side doesn't know what capabilities are present.
However, this does pose a problem when working with SHA-256
repositories, since we use the capabilities to know the remote side's
object format (hash algorithm). As of 8b214c2e9d ("clone: propagate
object-format when cloning from void", 2023-04-05), this has been fixed
for protocol v2, since there we always read the hash algorithm from the
remote.
Fortunately, the push version of the protocol already indicates a clue
for how to solve this. When the /info/refs endpoint is accessed for a
push and the remote is empty, we include a dummy "capabilities^{}" ref
pointing to the all-zeros object ID. The protocol documentation already
indicates this should _always_ be sent, even for fetches and clones, so
let's just do that, which means we'll properly announce the hash
algorithm as part of the capabilities. This just works with the
existing code because we share the same ref code for fetches and clones,
and libgit2, JGit, and dulwich do as well.
There is one minor issue to fix, though. If we called send_ref with
namespaces, we would return NULL with the capabilities entry, which
would cause a crash. Instead, let's refactor out a function to print
just the ref itself without stripping the namespace and use it for our
special capabilities entry.
Add several sets of tests for HTTP as well as for local clones. The
behavior can be slightly different for HTTP versus a local or SSH clone
because of the stateless-rpc functionality, so it's worth testing both.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --attr-source=<tree> cmd $args" is a new way to have any
command to read attributes not from the working tree but from the
given tree object.
* jc/attr-source-tree:
attr: teach "--attr-source=<tree>" global option to "git"
We make liberal use of the strbuf API functions and types, but the
inclusion of <strbuf.h> comes indirectly by including <http.h>,
which does not happen if you build with NO_CURL.
Signed-off-by: Christian Hesse <mail@eworm.de>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.41-rc0 fails to compile run-command.c with `NO_PTHREADS` defined,
i.e.
$ make NO_PTHREADS=1 run-command.o
as `ALLOC_GROW()` macro is used in the `atexit()` emulation but the
macro definition is not available.
This bisects to 36bf195890 (alloc.h: move ALLOC_GROW() functions from
cache.h, 2023-02-24), which replaced includes of <cache.h> with
<alloc.h>, which is the new home of `ALLOC_GROW()` (and
`ALLOC_GROW_BY()`).
We can see that run-command.c is the only one that try to use these
macros without including <alloc.h>.
$ git grep -l -e '[^_]ALLOC_GROW(' -e 'ALLOC_GROW_BY(' \*.c | sort >/tmp/1
$ git grep -l 'alloc\.h' \*.c | sort >/tmp/2
$ comm -23 /tmp/[12]
compat/simple-ipc/ipc-unix-socket.c
run-command.c
The "compat/" file only talks about the macro in the comment,
and is not broken.
We could fix this by conditionally including "alloc.h" when
`NO_PTHREADS` is defined. But we have relatively few examples of
conditional includes throughout the tree[^1].
Instead, include "alloc.h" unconditionally in run-command.c to allow it
to successfully compile even when NO_PTHREADS is defined.
[^1]: With `git grep -E -A1 '#if(n)?def' -- **/*.c | grep '#include' -B1`.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref transaction can fail after the user has written their tag
message. In particular, if there exists a tag `foo/bar` and `git tag -a
foo` is said then the command will only fail once it tries to write
`refs/tags/foo`, which is after the file has been unlinked.
Hold on to the message file for a little longer so that it is not
unlinked before the fatal error occurs.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard tag message file is unlinked if the tag is created.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document `TAG_EDITMSG` which we have told the user about on unsuccessful
command invocations since commit 3927bbe9a4 (tag: delete TAG_EDITMSG
only on successful tag, 2008-12-06).
Introduce this documentation since we are going to add tests for the
lifetime of this file in the case of command failure and success.
Use the documentation for `COMMIT_EDITMSG` from `git-commit.txt` as a
template since these two files share the same purpose.[1]
† 1: from commit 3927bbe9a4:
“ This matches the behavior of COMMIT_EDITMSG, which stays around
in case of error.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests use "! test_path_is_dir" or "! test_path_is_file" to
ensure that the path is not recursively checked out or "submodule
update" did not touch the working tree.
Use "test_path_is_missing" to assert that the path does not exist,
instead of negating test_path_is_* helpers; they are designed to be
loud in wrong occasions. Besides, negating "test_path_is_dir" would
mean we would be happy if a file exists there, which is not the case
for these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this test, a path (some_dir) that is originally a directory is to
be removed and then to be replaced with a file of the same name.
The expectation is that the path becomes a file at the end.
However, "! test_path_is_dir some_dir" is used to catch a breakage
that leaves the path as a directory.
But as with all the "test_path_is..." helpers, this use of the
helper makes it loud when the expectation (i.e. it is a directory)
is met, and otherwise is silent when it is not---this does not help
debugging.
Be more explicit and state that we expect the path to become a file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a way to assert the path 'foo' is missing, "! test_path_exists
foo" is a poor way to do so, as the helper is designed to complain
when 'foo' is missing, but the intention of the author who used
negated form was to make sure it does not exist. This does not
help debugging the tests.
Use test_path_is_missing instead, which is a more appropriate helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-----BEGIN PGP SIGNATURE-----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=keY2
-----END PGP SIGNATURE-----
Merge tag 'v2.41.0-rc0'
Git 2.41-rc0
* tag 'v2.41.0-rc0': (508 commits)
Git 2.41-rc0
t5583: fix shebang line
merge-tree: load default git config
fetch: introduce machine-parseable "porcelain" output format
fetch: move option related variables into main function
fetch: lift up parsing of "fetch.output" config variable
fetch: introduce `display_format` enum
fetch: refactor calculation of the display table width
fetch: print left-hand side when fetching HEAD:foo
fetch: add a test to exercise invalid output formats
fetch: split out tests for output format
fetch: fix `--no-recurse-submodules` with multi-remote fetches
The eighteenth batch
The seventeenth batch
diff-files: integrate with sparse index
t1092: add tests for `git diff-files`
test: rev-parse-upstream: add missing cmp
t: drop "verbose" helper function
t7001: use "ls-files --format" instead of "cut"
t7001: avoid git on upstream of pipe
...
"git fetch" learned the "--porcelain" option that emits what it did
in a machine-parseable format.
* ps/fetch-output-format:
fetch: introduce machine-parseable "porcelain" output format
fetch: move option related variables into main function
fetch: lift up parsing of "fetch.output" config variable
fetch: introduce `display_format` enum
fetch: refactor calculation of the display table width
fetch: print left-hand side when fetching HEAD:foo
fetch: add a test to exercise invalid output formats
fetch: split out tests for output format
fetch: fix `--no-recurse-submodules` with multi-remote fetches
Teach "diff-files" not to expand sparse-index unless needed.
* sl/diff-files-sparse:
diff-files: integrate with sparse index
t1092: add tests for `git diff-files`
Retire "verbose" helper function from the test framework.
* jk/test-verbose-no-more:
t: drop "verbose" helper function
t7001: use "ls-files --format" instead of "cut"
t7001: avoid git on upstream of pipe
The "--stdin" option of "git name-rev" has been replaced with
the "--annotate-stdin" option more than a year ago. We stop
advertising it in the "git name-rev -h" output.
* jc/name-rev-deprecate-stdin-further:
name-rev: make --stdin hidden
"git diff --dirstat" leaked memory, which has been plugged.
* jc/dirstat-plug-leaks:
diff: plug leaks in dirstat
diff: refactor common tail part of dirstat computation
"git fsck" learned to detect bit-flip breakages in the reachability
bitmap files.
* ds/fsck-bitmap:
fsck: use local repository
fsck: verify checksums of all .bitmap files
An earlier change broke "doc-diff", which has been corrected.
* fc/doc-use-datestamp-in-commit:
doc-diff: drop SOURCE_DATE_EPOCH override
doc: doc-diff: specify date
Test updates.
* ar/config-count-tests-updates:
t1300: add tests for missing keys
t1300: check stderr for "ignores pairs" tests
t1300: drop duplicate test
The tracing mechanism learned to notice and report when
auto-discovered bare repositories are being used, as allowing so
without explicitly stating the user intends to do so (with setting
GIT_DIR for example) can be used with social engineering as an
attack vector.
* gc/trace-bare-repo-setup:
setup: trace bare repository setups
The documentation was misleading about the interaction between
GIT_DEFAULT_HASH and "git clone", which has been clarified to
stress that the variable is to be ignored by the command.
* jc/doc-clarify-git-default-hash-variable:
doc: GIT_DEFAULT_HASH is and will be ignored during "clone"
Error messages given when working on an unborn branch that is
checked out in another worktree have been improved.
* rj/branch-unborn-in-other-worktrees:
branch: avoid unnecessary worktrees traversals
branch: rename orphan branches in any worktree
branch: description for orphan branch errors
branch: use get_worktrees() in copy_or_rename_branch()
branch: test for failures while renaming branches
Add the unit (bytes per second) for http.lowSpeedLimit
in the documentation.
Signed-off-by: Corentin Garcia <corenting@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For regular, non-`--rebase-merges` runs, there is very little work to do
for the parser when determining the total number of commands in a rebase
script: it is simply the number of lines after stripping the commented
lines and then trimming the trailing empty line, if any.
The `--rebase-merges` mode complicates things by introducing empty lines
and comments in the middle of the script. These should _not_ be counted
as commands, and indeed, when an interactive rebase is interrupted and
subsequently resumed, the total number of commands can magically shrink,
sometimes dramatically.
The reason for this strange behavior is that empty lines _are_ counted
in `edit_todo_list()` (but not the comments, as they are stripped via
`strbuf_stripspace(..., 1)`, which is a bug.
Let's fix this so that the correct total number is shown from the
get-go, by carefully adjusting it according to what's in the rebase
script. Extra care needs to be taken in case the user edits the script:
the number of commands might be different after the user edited than
beforehand.
Note: Even though commented lines are skipped in `edit_todo_list()`, we
still need to handle `TODO_COMMENT` items by decrementing the
already-incremented `total_nr` again: empty lines are also marked as
`TODO_COMMENT`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `total_nr` field in the `todo_list` structure merely serves display
purposes, and should only be used when generating the progress message.
In these two instances, however, we want to loop over all of the
commands in the parsed rebase script. The loop limit therefore needs to
be `nr`, which refers to the count of commands in the current
`todo_list`.
This is important because the two numbers, `nr` and `total_nr` can
differ wildly, e.g. due to `total_nr` _not_ counting comments or empty
lines, while `nr` skips any commands that already moved from the
`git-rebase-todo` file to the `done` file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to be more selective over which refs to pack by adding an
--include option to git-pack-refs.
The existing options allow some measure of selectivity. By default
git-pack-refs packs all tags. --all can be used to include all refs,
and the previous commit added the ability to exclude certain refs with
--exclude.
While these knobs give the user some selection over which refs to pack,
it could be useful to give more control. For instance, a repository may
have a set of branches that are rarely updated and would benefit from
being packed. --include would allow the user to easily include a set of
branches to be packed while leaving everything else unpacked.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At GitLab, we have a system that creates ephemeral internal refs that
don't live long before getting deleted. Having an option to exclude
certain refs from a packed-refs file allows these internal references to
be deleted much more efficiently.
Add an --exclude option to the pack-refs builtin, and use the ref
exclusions API to exclude certain refs from being packed into the final
packed-refs file
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--all packs not just branch tips but anything under refs/ with the
exception of hidden refs and broken refs. Clarify this in the
documentation.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
