Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gethostname(2) may not NUL terminate the buffer if hostname does
not fit; unfortunately there is no easy way to see if our buffer
was too small, but at least this will make sure we will not end up
using garbage past the end of the buffer.
* dt/xgethostname-nul-termination:
xgethostname: handle long hostnames
use HOST_NAME_MAX to size buffers for gethostname(2)
Add finishing touches to a recent topic.
* jk/quarantine-received-objects:
refs: reject ref updates while GIT_QUARANTINE_PATH is set
receive-pack: document user-visible quarantine effects
receive-pack: drop tmp_objdir_env from run_update_hook
Currently, Git's source code treats all timestamps as if they were
unsigned longs. Therefore, it is okay to write "%lu" when printing them.
There is a substantial problem with that, though: at least on Windows,
time_t is *larger* than unsigned long, and hence we will want to switch
away from the ill-specified `unsigned long` data type.
So let's introduce the pseudo format "PRItime" (currently simply being
defined to "lu") to make it easier to change the data type used for
timestamps.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
If the full hostname doesn't fit in the buffer supplied to
gethostname, POSIX does not specify whether the buffer will be
null-terminated, so to be safe, we should do it ourselves. Introduce
new function, xgethostname, which ensures that there is always a \0
at the end of the buffer.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX limits the length of host names to HOST_NAME_MAX. Export the
fallback definition from daemon.c and use this constant to make all
buffers used with gethostname(2) big enough for any possible result
and a terminating NUL.
Inspired-by: David Turner <dturner@twosigma.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/snprintf-cleanups:
daemon: use an argv_array to exec children
gc: replace local buffer with git_path
transport-helper: replace checked snprintf with xsnprintf
convert unchecked snprintf into xsnprintf
combine-diff: replace malloc/snprintf with xstrfmt
replace unchecked snprintf calls with heap buffers
receive-pack: print --pack-header directly into argv array
name-rev: replace static buffer with strbuf
create_branch: use xstrfmt for reflog message
create_branch: move msg setup closer to point of use
avoid using mksnpath for refs
avoid using fixed PATH_MAX buffers for refs
fetch: use heap buffer to format reflog
tag: use strbuf to format tag header
diff: avoid fixed-size buffer for patch-ids
odb_mkstemp: use git_path_buf
odb_mkstemp: write filename into strbuf
do not check odb_mkstemp return value for errors
Since 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03), we have to feed the
pre-receive hook the tmp_objdir environment, so that git
programs run from the hook know where to find the objects.
That commit modified run_update_hook() to do the same, but
there it is a noop. By the time we get to the update hooks,
we have already migrated the objects from quarantine, and so
tmp_objdir_env() will always return NULL. We can drop this
useless call.
Note that the ordering here and the lack of support for the
update hook is intentional. The update hook calls are
interspersed with actual ref updates, and we must migrate
the objects before any refs are updated (since otherwise
those refs would appear broken to outside processes). So the
only other options are:
- remain in quarantine for the _first_ ref, but not the
others. This is sufficiently confusing that it can be
rejected outright.
- run all the individual update hooks first, then migrate,
then update all the refs. But this changes the repository
state that the update hooks see (i.e., whether or not
refs from the same push are updated yet or not).
So the functionality is fine and remains unchanged with this
patch; we're just cleaning up a useless and confusing line
of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After receive-pack reads the pack header from the client, it
feeds the already-read part to index-pack and unpack-objects
via their --pack-header command-line options. To do so, we
format it into a fixed buffer, then duplicate it into the
child's argv_array.
Our buffer is long enough to handle any possible input, so
this isn't wrong. But it's more complicated than it needs to
be; we can just argv_array_pushf() the final value and avoid
the intermediate copy. This drops the magic number and is
more efficient, too.
Note that we need to push to the argv_array in order, which
means we can't do the push until we are in the "unpack-objects
versus index-pack" conditional. Rather than duplicate the
slightly complicated format specifier, I pushed it into a
helper function.
Signed-off-by: Jeff King <peff@peff.net>
"git receive-pack" could have been forced to die by attempting
allocate an unreasonably large amount of memory with a crafted push
certificate; this has been fixed.
* bc/push-cert-receive-fix:
builtin/receive-pack: fix incorrect pointer arithmetic
Make the internal storage for struct sha1_array use an array of struct
object_id internally. Update the users of this struct which inspect its
internals.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert some hardcoded constants into uses of parse_oid_hex.
Additionally, convert all uses of struct command, and miscellaneous
other functions necessary for that. This work is necessary to be able
to convert sha1_array_append later on.
To avoid needing to specify a constant, reject shallow lines with the
wrong length instead of simply ignoring them.
Note that in queue_command we are guaranteed to have a NUL-terminated
buffer or at least one byte of overflow that we can safely read, so the
linelen check can be elided. We would die in such a case, but not read
invalid memory.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we had already processed the last newline in a push certificate, we
would end up subtracting NULL from the end-of-certificate pointer when
computing the length of the line. This would have resulted in an
absurdly large length, and possibly a buffer overflow. Instead,
subtract the beginning-of-certificate pointer from the
end-of-certificate pointer, which is what's expected.
Note that this situation should never occur, since not only do we
require the certificate to be newline terminated, but the signature will
only be read from the beginning of a line. Nevertheless, it seems
prudent to correct it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 20 bytes, use the constant
GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead
of GIT_SHA1_RAWSZ. This will ease the transition down the line by
distinguishing between places where we need to allocate memory suitable
for the largest hash from those where we need to handle the current
hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
Instead of counting the arguments to see if there are any and then
building the full command use a single loop and add the hook command
just before the first argument. This reduces duplication and overall
code size.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
The err_fd descriptor passed to the unpack() function is
intended to be handed off to the child index-pack, and our
async muxer will read until it gets EOF. However, if we
encounter an error before handing off the descriptor, we
must manually close(err_fd). Otherwise we will be waiting
for our muxer to finish, while the muxer is waiting for EOF
on err_fd.
We fixed an identical deadlock already in 49ecfa13f
(receive-pack: close sideband fd on early pack errors,
2013-04-19). But since then, the function grew a new
early-return in 722ff7f87 (receive-pack: quarantine objects
until pre-receive accepts, 2016-10-03), when we fail to
create a temporary directory. This return needs the same
treatment.
Reported-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few leaf functions in various files that call
resolve_refdup. Convert these functions to use struct object_id
internally to prepare for transitioning resolve_refdup itself.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We de-duplicate ".have" refs among themselves, but never
check if they are duplicates of our local refs. It's not
unreasonable that they would be if we are a "--shared" or
"--reference" clone of a similar repository; we'd have all
the same tags.
We can handle this by inserting our local refs into the
oidset, but obviously not suppressing duplicates (since the
refnames are important).
Note that this also switches the order in which we advertise
refs, processing ours first and then any alternates. The
order shouldn't matter (and arguably showing our refs first
makes more sense).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Namely, de-duplicate them. We use the same set as the
alternates, since we call them both ".have" (i.e., there is
no value in showing one versus the other).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment claims that we handle alternate ".have" lines
through this function, but that hasn't been the case since
85f251045 (write_head_info(): handle "extra refs" locally,
2012-01-06).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have an alternate object store with a very large
number of refs, the peak memory usage of the sha1_array can
grow high, even if most of them are duplicates that end up
not being printed at all.
The similar for_each_alternate_ref() code-paths in
fetch-pack solve this by using flags in "struct object" to
de-duplicate (and so are relying on obj_hash at the core).
But we don't have a "struct object" at all in this case. We
could call lookup_unknown_object() to get one, but if our
goal is reducing memory footprint, it's not great:
- an unknown object is as large as the largest object type
(a commit), which is bigger than an oidset entry
- we can free the memory after our ref advertisement, but
"struct object" entries persist forever (and the
receive-pack may hang around for a long time, as the
bottleneck is often client upload bandwidth).
So let's use an oidset. Note that unlike a sha1-array it
doesn't sort the output as a side effect. However, our
output is at least stable, because for_each_alternate_ref()
will give us the sha1s in ref-sorted order.
In one particularly pathological case with an alternate that
has 60,000 unique refs out of 80 million total, this reduced
the peak heap usage of "git receive-pack . </dev/null" from
13GB to 14MB.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaking down the fields in the interface makes it easier to
change the backend of for_each_alternate_ref to something
that doesn't use "struct ref" internally.
The only field that callers actually look at is the oid,
anyway. The refname is kept in the interface as a plausible
thing for future code to want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
string_list_clear() handles empty lists just fine, so remove the
redundant check.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smudge/clean filter API expect an external process is spawned
to filter the contents for each path that has a filter defined. A
new type of "process" filter API has been added to allow the first
request to run the filter for a path to spawn a single process, and
all filtering need is served by this single process for multiple
paths, reducing the process creation overhead.
* ls/filter-process:
contrib/long-running-filter: add long running filter example
convert: add filter.<driver>.process option
convert: prepare filter.<driver>.process option
convert: make apply_filter() adhere to standard Git error handling
pkt-line: add functions to read/write flush terminated packet streams
pkt-line: add packet_write_gently()
pkt-line: add packet_flush_gently()
pkt-line: add packet_write_fmt_gently()
pkt-line: extract set_packet_header()
pkt-line: rename packet_write() to packet_write_fmt()
run-command: add clean_on_exit_handler
run-command: move check_pipe() from write_or_die to run_command
convert: modernize tests
convert: quote filter names in error messages
Some code paths want to format multiple abbreviated sha1s in
the same output line. Because we use a single static buffer
for our return value, they have to either break their output
into several calls or allocate their own arrays and use
find_unique_abbrev_r().
Intead, let's mimic sha1_to_hex() and use a ring of several
buffers, so that the return value stays valid through
multiple calls. This shortens some of the callers, and makes
it harder to for them to make a silly mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order for the receiving end of "git push" to inspect the
received history and decide to reject the push, the objects sent
from the sending end need to be made available to the hook and
the mechanism for the connectivity check, and this was done
traditionally by storing the objects in the receiving repository
and letting "git gc" to expire it. Instead, store the newly
received objects in a temporary area, and make them available by
reusing the alternate object store mechanism to them only while we
decide if we accept the check, and once we decide, either migrate
them to the repository or purge them immediately.
* jk/quarantine-received-objects:
tmp-objdir: do not migrate files starting with '.'
tmp-objdir: put quarantine information in the environment
receive-pack: quarantine objects until pre-receive accepts
tmp-objdir: introduce API for temporary object directories
check_connected: accept an env argument
packet_write() should be called packet_write_fmt() because it is a
printf-like function that takes a format string as first parameter.
packet_write_fmt() should be used for text strings only. Arbitrary
binary data should use a new packet_write() function that is introduced
in a subsequent patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a client pushes objects to us, index-pack checks the
objects themselves and then installs them into place. If we
then reject the push due to a pre-receive hook, we cannot
just delete the packfile; other processes may be depending
on it. We have to do a normal reachability check at this
point via `git gc`.
But such objects may hang around for weeks due to the
gc.pruneExpire grace period. And worse, during that time
they may be exploded from the pack into inefficient loose
objects.
Instead, this patch teaches receive-pack to put the new
objects into a "quarantine" temporary directory. We make
these objects available to the connectivity check and to the
pre-receive hook, and then install them into place only if
it is successful (and otherwise remove them as tempfiles).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More i18n.
* va/i18n:
i18n: update-index: mark warnings for translation
i18n: show-branch: mark plural strings for translation
i18n: show-branch: mark error messages for translation
i18n: receive-pack: mark messages for translation
notes: spell first word of error messages in lowercase
i18n: notes: mark error messages for translation
i18n: merge-recursive: mark verbose message for translation
i18n: merge-recursive: mark error messages for translation
i18n: config: mark error message for translation
i18n: branch: mark option description for translation
i18n: blame: mark error messages for translation
Mark messages refuse_unconfigured_deny_msg and
refuse_unconfigured_deny_delete_current_msg for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro FLEX_ALLOC_MEM instead of open-coding it. This shortens
and simplifies the code a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
After a client has sent us the complete pack, we may spend
some time processing the data and running hooks. If the
client asked us to be quiet, receive-pack won't send any
progress data during the index-pack or connectivity-check
steps. And hooks may or may not produce their own progress
output. In these cases, the network connection is totally
silent from both ends.
Git itself doesn't care about this (it will wait forever),
but other parts of the system (e.g., firewalls,
load-balancers, etc) might hang up the connection. So we'd
like to send some sort of keepalive to let the network and
the client side know that we're still alive and processing.
We can use the same trick we did in 05e9515 (upload-pack:
send keepalive packets during pack computation, 2013-09-08).
Namely, we will send an empty sideband data packet every `N`
seconds that we do not relay any stderr data over the
sideband channel. As with 05e9515, this means that we won't
bother sending keepalives when there's actual progress data,
but will kick in when it has been disabled (or if there is a
lull in the progress data).
The concept is simple, but the details are subtle enough
that they need discussing here.
Before the client sends us the pack, we don't want to do any
keepalives. We'll have sent our ref advertisement, and we're
waiting for them to send us the pack (and tell us that they
support sidebands at all).
While we're receiving the pack from the client (or waiting
for it to start), there's no need for keepalives; it's up to
them to keep the connection active by sending data.
Moreover, it would be wrong for us to do so. When we are the
server in the smart-http protocol, we must treat our
connection as half-duplex. So any keepalives we send while
receiving the pack would potentially be buffered by the
webserver. Not only does this make them useless (since they
would not be delivered in a timely manner), but it could
actually cause a deadlock if we fill up the buffer with
keepalives. (It wouldn't be wrong to send keepalives in this
phase for a full-duplex connection like ssh; it's simply
pointless, as it is the client's responsibility to speak).
As soon as we've gotten all of the pack data, then the
client is waiting for us to speak, and we should start
keepalives immediately. From here until the end of the
connection, we send one any time we are not otherwise
sending data.
But there's a catch. Receive-pack doesn't know the moment
we've gotten all the data. It passes the descriptor to
index-pack, who reads all of the data, and then starts
resolving the deltas. We have to communicate that back.
To make this work, we instruct the sideband muxer to enable
keepalives in three phases:
1. In the beginning, not at all.
2. While reading from index-pack, wait for a signal
indicating end-of-input, and then start them.
3. Afterwards, always.
The signal from index-pack in phase 2 has to come over the
stderr channel which the muxer is reading. We can't use an
extra pipe because the portable run-command interface only
gives us stderr and stdout.
Stdout is already used to pass the .keep filename back to
receive-pack. We could also send a signal there, but then we
would find out about it in the main thread. And the
keepalive needs to be done by the async muxer thread (since
it's the one writing sideband data back to the client). And
we can't reliably signal the async thread from the main
thread, because the async code sometimes uses threads and
sometimes uses forked processes.
Therefore the signal must come over the stderr channel,
where it may be interspersed with other random
human-readable messages from index-pack. This patch makes
the signal a single NUL byte. This is easy to parse, should
not appear in any normal stderr output, and we don't have to
worry about any timing issues (like seeing half the signal
bytes in one read(), and half in a subsequent one).
This is a bit ugly, but it's simple to code and should work
reliably.
Another option would be to stop using an async thread for
muxing entirely, and just poll() both stderr and stdout of
index-pack from the main thread. This would work for
index-pack (because we aren't doing anything useful in the
main thread while it runs anyway). But it would make the
connectivity check and the hook muxers much more
complicated, as they need to simultaneously feed the
sub-programs while reading their stderr.
The index-pack phase is the only one that needs this
signaling, so it could simply behave differently than the
other two. That would mean having two separate
implementations of copy_to_sideband (and the keepalive
code), though. And it still doesn't get rid of the
signaling; it just means we can write a nicer message like
"END_OF_INPUT" or something on stdout, since we don't have
to worry about separating it from the stderr cruft.
One final note: this signaling trick is only done with
index-pack, not with unpack-objects. There's no point in
doing it for the latter, because by definition it only kicks
in for a small number of objects, where keepalives are not
as useful (and this conveniently lets us avoid duplicating
the implementation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a large push, the server side of the
connection may spend a lot of time (30s or more for a full
push of linux.git) walking the object graph without
producing any output. Let's give the user some indication
that we're actually working.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the connectivity check encounters a problem when
receiving a push, the error output goes to receive-pack's
stderr, whose destination depends on the protocol used
(ssh tends to send it to the user, though without a "remote"
prefix; http will generally eat it in the server's error
log).
The information should consistently go back to the user, as
there is a reasonable chance their client is buggy and
generating a bad pack.
We can do so by muxing it over the sideband as we do with
other sub-process stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a large push, the server side may have to
spend a lot of CPU processing the incoming packfile.
During the "receiving" phase, we are typically network
bound, and the client is writing its own progress to the
user. But during the delta resolution phase, we may spend
minutes (e.g., for a full push of linux.git) without
making any indication to the user that the connection has
not hung.
Let's ask index-pack to produce progress output for this
phase (unless the client asked us to be quiet, of course).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number of variants of check_everything_connected has
grown over the years, so that the "real" function takes
several possibly-zero, possibly-NULL arguments. We hid the
complexity behind some wrapper functions, but this doesn't
scale well when we want to add new options.
If we add more wrapper variants to handle the new options,
then we can get a combinatorial explosion when those options
might be used together (right now nobody wants to use both
"shallow" and "transport" together, so we get by with just a
few wrappers).
If instead we add new parameters to each function, each of
which can have a default value, then callers who want the
defaults end up with confusing invocations like:
check_everything_connected(fn, 0, data, -1, 0, NULL);
where it is unclear which parameter is which (and every
caller needs updated when we add new options).
Instead, let's add a struct to hold all of the optional
parameters. This is a little more verbose for the callers
(who have to declare the struct and fill it in), but it
makes their code much easier to follow, because every option
is named as it is set (and unused options do not have to be
mentioned at all).
Note that we could also stick the iteration function and its
callback data into the option struct, too. But since those
are required for each call, by avoiding doing so, we can let
very simple callers just pass "NULL" for the options and not
worry about the struct at all.
While we're touching each site, let's also rename the
function to check_connected(). The existing name was quite
long, and not all of the wrappers even used the full name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pre/post receive hook may be interested in more information from the
user. This information can be transmitted when both client and server
support the "push-options" capability, which when used is a phase directly
after update commands ended by a flush pkt.
Similar to the atomic option, the server capability can be disabled via
the `receive.advertisePushOptions` config variable. While documenting
this, fix a nit in the `receive.advertiseAtomic` wording.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable GIT_PUSH_OPTION_COUNT is set to the number of
push options sent, and GIT_PUSH_OPTION_{0,1,..} is set to the transmitted
option.
The code is not executed as the push options are set to NULL, nor is the
new capability advertised.
There was some discussion back and forth how to present these push options
to the user as there are some ways to do it:
Keep all options in one environment variable
============================================
+ easiest way to implement in Git
- This would make things hard to parse correctly in the hook.
Put the options in files instead,
filenames are in GIT_PUSH_OPTION_FILES
======================================
+ After a discussion about environment variables and shells, we may not
want to put user data into an environment variable (see [1] for example).
+ We could transmit binaries, i.e. we're not bound to C strings as
we are when using environment variables to the user.
+ Maybe easier to parse than constructing environment variable names
GIT_PUSH_OPTION_{0,1,..} yourself
- cleanup of the temporary files is hard to do reliably
- we have race conditions with multiple clients pushing, hence we'd need
to use mkstemp. That's not too bad, but still.
Use environment variables, but restrict to key/value pairs
==========================================================
(When the user pushes a push option `foo=bar`, we'd
GIT_PUSH_OPTION_foo=bar)
+ very easy to parse for a simple model of push options
- it's not sufficient for more elaborate models, e.g.
it doesn't allow doubles (e.g. cc=reviewer@email)
Present the options in different environment variables
======================================================
(This is implemented)
* harder to parse as a user, but we have a sample hook for that.
- doesn't allow binary files
+ allows the same option twice, i.e. is not restrictive about
options, except for binary files.
+ doesn't clutter a remote directory with (possibly stale)
temporary files
As we first want to focus on getting simple strings to work
reliably, we go with the last option for now. If we want to
do transmission of binaries later, we can just attach a
'side-channel', e.g. "any push option that contains a '\0' is
put into a file instead of the environment variable and we'd
have new GIT_PUSH_OPTION_FILES, GIT_PUSH_OPTION_FILENAME_{0,1,..}
environment variables".
[1] 'Shellshock' https://lwn.net/Articles/614218/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow messages that are generated by auto gc during "git push" on
the receiving end to be explicitly passed back to the sending end
over sideband, so that they are shown with "remote: " prefix to
avoid confusing the users.
* lf/receive-pack-auto-gc-to-client:
receive-pack: send auto-gc output over sideband 2
Redirect auto-gc output to the sideband such that it is visible to all
clients. As a side effect, all auto-gc error messages are now prefixed
with "remote: " before being printed to stderr on the client-side which
makes it easier to understand that those error messages originate from
the server.
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code restructuring around the "refs" area to prepare for pluggable
refs backends.
* dt/pre-refs-backend: (24 commits)
refs: on symref reflog expire, lock symref not referrent
refs: move resolve_ref_unsafe into common code
show_head_ref(): check the result of resolve_ref_namespace()
check_aliased_update(): check that dst_name is non-NULL
checkout_paths(): remove unneeded flag variable
cmd_merge(): remove unneeded flag variable
fsck_head_link(): remove unneeded flag variable
read_raw_ref(): change flags parameter to unsigned int
files-backend: inline resolve_ref_1() into resolve_ref_unsafe()
read_raw_ref(): manage own scratch space
files-backend: break out ref reading
resolve_ref_1(): eliminate local variable "bad_name"
resolve_ref_1(): reorder code
resolve_ref_1(): eliminate local variable
resolve_ref_unsafe(): ensure flags is always set
resolve_ref_unsafe(): use for loop to count up to MAXDEPTH
resolve_missing_loose_ref(): simplify semantics
t1430: improve test coverage of deletion of badly-named refs
t1430: test for-each-ref in the presence of badly-named refs
t1430: don't rely on symbolic-ref for creating broken symrefs
...
If there is an error in resolve_ref_unsafe(), it returns NULL. We check
for this case, but not until after calling strip_namespace(). Instead,
call strip_namespace() *after* the NULL check.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make receive-pack use the parse_options API,
bringing it more in line with send-pack and push.
Helped-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Sidhant Sharma [:tk] <tigerkid001@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many manual argv allocations that predate the
argv_array API. Switching to that API brings a few
advantages:
1. We no longer have to manually compute the correct final
array size (so it's one less thing we can screw up).
2. In many cases we had to make a separate pass to count,
then allocate, then fill in the array. Now we can do it
in one pass, making the code shorter and easier to
follow.
3. argv_array handles memory ownership for us, making it
more obvious when things should be free()d and and when
not.
Most of these cases are pretty straightforward. In some, we
switch from "run_command_v" to "run_command" which lets us
directly use the argv_array embedded in "struct
child_process".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths that run "gc --auto" before exiting kept packfiles
mapped and left the file descriptors to them open, which was not
friendly to systems that cannot remove files that are open. They
now close the packs before doing so.
* js/close-packs-before-gc:
receive-pack: release pack files before garbage-collecting
merge: release pack files before garbage-collecting
am: release pack files before garbage-collecting
fetch: release pack files before garbage-collecting
A few unportable C construct have been spotted by clang compiler
and have been fixed.
* jk/clang-pedantic:
bswap: add NO_UNALIGNED_LOADS define
avoid shifting signed integers 31 bits
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes use 32-bit unsigned integers as bit-fields.
It's fine to access the MSB, because it's unsigned. However,
doing so as "1 << 31" is wrong, because the constant "1" is
a signed int, and we shift into the sign bit, causing
undefined behavior.
We can fix this by using "1U" as the constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
In addition to matching stripped refs, one can now add hideRefs
patterns that the full (unstripped) ref is matched against. To
distinguish between stripped and full matches, those new patterns
must be prefixed with a circumflex (^).
This commit also removes support for the undocumented and unintended
hideRefs settings ".have" (suppressing all "have" lines) and
"capabilities^{}" (suppressing the capabilities line).
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To generate "--keep=receive-pack $pid on $host", we write
progressively into a single buffer, which requires keeping
track of how much we've written so far. But since the result
is destined to go into our argv array, we can simply use
argv_array_pushf.
Unfortunately we still have to have a fixed-size buffer for
the gethostname() call, but at least it now doesn't involve
any extra size computation. And as a bonus, we drop an
sprintf and a strcpy call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before sha1_to_hex_r() existed, a simple way to get hex
sha1 into a buffer was with:
strcpy(buf, sha1_to_hex(sha1));
This isn't wrong (assuming the buf is 41 characters), but it
makes auditing the code base for bad strcpy() calls harder,
as these become false positives.
Let's convert them to sha1_to_hex_r(), and likewise for
some calls to find_unique_abbrev(). While we're here, we'll
double-check that all of the buffers are correctly sized,
and use the more obvious GIT_SHA1_HEXSZ constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This strncpy is pointless; we pass the strlen() of the src
string, meaning that it works just like a memcpy. Worse,
though, is that the size has no relation to the destination
buffer, meaning it is a potential overflow. In practice,
it's not. We pass only short constant strings like
"warning: " and "error: ", which are much smaller than the
destination buffer.
We can make this much simpler by just using xsnprintf, which
will check for overflow and return the size for our next
vsnprintf, without us having to run a separate strlen().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
If HEAD of a repository points to a conflict reference, such as:
* There exist a reference named 'refs/heads/jx/feature1', but HEAD
points to 'refs/heads/jx', or
* There exist a reference named 'refs/heads/feature', but HEAD points
to 'refs/heads/feature/bad'.
When we push to delete a reference for this repo, such as:
git push /path/to/bad-head-repo.git :some/good/reference
The git-receive-pack process will crash.
This is because if HEAD points to a conflict reference, the function
`resolve_refdup("HEAD", ...)` does not return a valid reference name,
but a null buffer. Later matching the delete reference against the null
buffer will cause git-receive-pack crash.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, missing emails in commit and tag objects can be demoted to
mere warnings with
git config receive.fsck.missingemail=warn
The value is actually a comma-separated list.
In case that the same key is listed in multiple receive.fsck.<msg-id>
lines in the config, the latter configuration wins (this can happen for
example when both $HOME/.gitconfig and .git/config contain message type
settings).
As git receive-pack does not actually perform the checks, it hands off
the setting to index-pack or unpack-objects in the form of an optional
argument to the --strict option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extending the js/push-to-deploy topic, the behaviour of "git push"
when updating the working tree and the index with an update to the
branch that is checked out can be tweaked by push-to-checkout hook.
* jc/push-to-checkout:
receive-pack: support push-to-checkout hook
receive-pack: refactor updateInstead codepath
"git push" has been taught a "--atomic" option that makes push to
update more than one ref an "all-or-none" affair.
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the atomic protocol option to allow
receive-pack to inform the client that it has
atomic push capability.
This commit makes the functionality introduced
in the previous commits go live for the serving
side. The changes in documentation reflect the
protocol capabilities of the server.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces the new function execute_commands_atomic which will use
one atomic transaction for all updates. The default behavior is still
the old non atomic way, one ref at a time. This is to cause as little
disruption as possible to existing clients. It is unknown if there are
client scripts that depend on the old non-atomic behavior so we make it
opt-in for now.
A later patch will add the possibility to actually use the functionality
added by this patch. For now use_atomic is always 0.
Inspired-by: Ronnie Sahlberg <sahlberg@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves all code related to transactions into the
execute_commands_non_atomic function. This includes
beginning and committing the transaction as well as
dealing with the errors which may occur during the
begin and commit phase of a transaction.
No functional changes intended.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit allows us in a later patch to easily distinguish between
the non atomic way to update the received refs and the atomic way which
is introduced in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discussion on the previous patch revealed we rather want to err on the
safe side. To do so we need to stop receive-pack in case of the possible
future bug when connectivity is not checked on a shallow push.
Also while touching that code we considered that removing the reported
refs may be harmful in some situations. Sound the message more like a
"This Cannot Happen, Please Investigate!" instead of giving advice to
remove refs.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the main "execute_commands" loop in receive-pack easier to read
by splitting out some steps into helper functions. The new helper
'should_process_cmd' checks if a ref update is unnecessary, whether
due to an error having occurred or for another reason. The helper
'warn_if_skipped_connectivity_check' warns if we have forgotten to
run a connectivity check on a ref which is shallow for the client
which would be a bug.
This will help us to duplicate less code in a later patch when we make
a second copy of the "execute_commands" loop.
No functional change intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
"git remote update --prune" to drop many refs has been optimized.
* mh/simplify-repack-without-refs:
sort_string_list(): rename to string_list_sort()
prune_remote(): iterate using for_each_string_list_item()
prune_remote(): rename local variable
repack_without_refs(): make the refnames argument a string_list
prune_remote(): sort delete_refs_list references en masse
prune_remote(): initialize both delete_refs lists in a single loop
prune_remote(): exit early if there are no stale references
Keep the "there is nothing to update in a bare repository", "when
the check and update process runs, here are the GIT_DIR and
GIT_WORK_TREE" logic, which will be common regardless of how the
decision to update and the actual update are done, in the original
update_worktree() function, and split out the "working tree and
the index must match the original HEAD exactly" and "use two-way
read-tree to update the working tree" into a new push_to_deploy()
helper function. This will allow customizing the logic more cleanly
and easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When synchronizing between working directories, it can be handy to update
the current branch via 'push' rather than 'pull', e.g. when pushing a fix
from inside a VM, or when pushing a fix made on a user's machine (where
the developer is not at liberty to install an ssh daemon let alone know
the user's password).
The common workaround – pushing into a temporary branch and then merging
on the other machine – is no longer necessary with this patch.
The new option is:
'updateInstead':
Update the working tree accordingly, but refuse to do so if there
are any uncommitted changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the asynchronous start of copy_to_sideband() fails, then any
env_array entries added to struct child_process proc by
prepare_push_cert_sha1() are leaked. Call the latter function only
after start_async() succeeded so that the allocated entries are
cleaned up automatically by start_command() or finish_command().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add managed "env" array to child_process to clarify the lifetime
rules.
* rs/run-command-env-array:
use env_array member of struct child_process
run-command: add env_array, an optional argv_array for env
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
Convert users of struct child_process to using the managed env_array for
specifying environment variables instead of supplying an array on the
stack or bringing their own argv_array. This shortens and simplifies
the code and ensures automatically that the allocated memory is freed
after use.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref transaction API so that we pass the reflog message to the
create/delete/update functions instead of to ref_transaction_commit.
This allows different reflog messages for each ref update in a multi-ref
transaction.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lockfile API and its users have been cleaned up.
* mh/lockfile: (38 commits)
lockfile.h: extract new header file for the functions in lockfile.c
hold_locked_index(): move from lockfile.c to read-cache.c
hold_lock_file_for_append(): restore errno before returning
get_locked_file_path(): new function
lockfile.c: rename static functions
lockfile: rename LOCK_NODEREF to LOCK_NO_DEREF
commit_lock_file_to(): refactor a helper out of commit_lock_file()
trim_last_path_component(): replace last_path_elm()
resolve_symlink(): take a strbuf parameter
resolve_symlink(): use a strbuf for internal scratch space
lockfile: change lock_file::filename into a strbuf
commit_lock_file(): use a strbuf to manage temporary space
try_merge_strategy(): use a statically-allocated lock_file object
try_merge_strategy(): remove redundant lock_file allocation
struct lock_file: declare some fields volatile
lockfile: avoid transitory invalid states
git_config_set_multivar_in_file(): avoid call to rollback_lock_file()
dump_marks(): remove a redundant call to rollback_lock_file()
api-lockfile: document edge cases
commit_lock_file(): rollback lock file on failure to rename
...
The argv_array used in unpack() is never freed. Instead of adding
explicit calls to argv_array_clear() use the args member of struct
child_process and let run_command() and friends clean up for us.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pre- and post-receive hooks are no longer required to read all
their inputs.
* jc/ignore-sigpipe-while-running-hooks:
receive-pack: allow hooks to ignore its standard input stream
clang gives the following warning:
builtin/receive-pack.c:327:35: error: sizeof on array function
parameter will return size of 'unsigned char *' instead of 'unsigned
char [20]' [-Werror,-Wsizeof-array-argument]
git_SHA1_Update(&ctx, out, sizeof(out));
^
builtin/receive-pack.c:292:37: note: declared here
static void hmac_sha1(unsigned char out[20],
^
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating with the stateless RPC mode, we will receive a nonce
issued by another instance of us that advertised our capability and
refs some time ago. Update the logic to check received nonce to
detect this case, compute how much time has passed since the nonce
was issued and report the status with a new environment variable
GIT_PUSH_CERT_NONCE_SLOP to the hooks.
GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The
hooks are free to decide how large a slop it is willing to accept.
Strictly speaking, the "nonce" is not really a "nonce" anymore in
the stateless RPC mode, as it will happily take any "nonce" issued
by it (which is protected by HMAC and its secret key) as long as it
is fresh enough. The degree of this security degradation, relative
to the native protocol, is about the same as the "we make sure that
the 'git push' decided to update our refs with new objects based on
the freshest observation of our refs by making sure the values they
claim the original value of the refs they ask us to update exactly
match the current state" security is loosened to accomodate the
stateless RPC mode in the existing code without this series, so
there is no need for those who are already using smart HTTP to push
to their repositories to be alarmed any more than they already are.
In addition, the server operator can set receive.certnonceslop
configuration variable to specify how stale a nonce can be (in
seconds). When this variable is set, and if the nonce received in
the certificate that passes the HMAC check was less than that many
seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS
(instead of "SLOP") and the received nonce value is given in
GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded
hook to check if the certificate we received is recent enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to prevent a valid push certificate for pushing into an
repository from getting replayed in a different push operation, send
a nonce string from the receive-pack process and have the signer
include it in the push certificate. The receiving end uses an HMAC
hash of the path to the repository it serves and the current time
stamp, hashed with a secret seed (the secret seed does not have to
be per-repository but can be defined in /etc/gitconfig) to generate
the nonce, in order to ensure that a random third party cannot forge
a nonce that looks like it originated from it.
The original nonce is exported as GIT_PUSH_CERT_NONCE for the hooks
to examine and match against the value on the "nonce" header in the
certificate to notice a replay, but returned "nonce" header in the
push certificate is examined by receive-pack and the result is
exported as GIT_PUSH_CERT_NONCE_STATUS, whose value would be "OK"
if the nonce recorded in the certificate matches what we expect, so
that the hooks can more easily check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pre-receive and post-receive hooks were designed to be an
improvement over old style update and post-update hooks, which take
the update information on their command line and are limited by the
command line length limit. The same information is fed from the
standard input to pre/post-receive hooks instead to lift this
limitation. It has been mandatory for these new style hooks to
consume the update information fully from the standard input stream.
Otherwise, they would risk killing the receive-pack process via
SIGPIPE.
If a hook does not want to look at all the information, it is easy
to send its standard input to /dev/null (perhaps a niche use of hook
might need to know only the fact that a push was made, without
having to know what objects have been pushed to update which refs),
and this has already been done by existing hooks that are written
carefully.
However, because there is no good way to consistently fail hooks
that do not consume the input fully (a small push may result in a
short update record that may fit within the pipe buffer, to which
the receive-pack process may manage to write before the hook has a
chance to exit without reading anything, which will not result in a
death-by-SIGPIPE of receive-pack), it can lead to a hard to diagnose
"once in a blue moon" phantom failure.
Lift this "hooks must consume their input fully" mandate. A mandate
that is not enforced strictly is not helping us to catch mistakes in
hooks. If a hook has a good reason to decide the outcome of its
operation without reading the information we feed it, let it do so
as it pleases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the interim protocol, we used to send the update commands even
though we already send a signed copy of the same information when
push certificate is in use. Update the send-pack/receive-pack pair
not to do so.
The notable thing on the receive-pack side is that it makes sure
that there is no command sent over the traditional protocol packet
outside the push certificate. Otherwise a pusher can claim to be
pushing one set of ref updates in the signed certificate while
issuing commands to update unrelated refs, and such an update will
evade later audits.
Finally, start documenting the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reusing the GPG signature check helpers we already have, verify
the signature in receive-pack and give the results to the hooks
via GIT_PUSH_CERT_{SIGNER,KEY,STATUS} environment variables.
Policy decisions, such as accepting or rejecting a good signature by
a key that is not fully trusted, is left to the hook and kept
outside of the core.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While signed tags and commits assert that the objects thusly signed
came from you, who signed these objects, there is not a good way to
assert that you wanted to have a particular object at the tip of a
particular branch. My signing v2.0.1 tag only means I want to call
the version v2.0.1, and it does not mean I want to push it out to my
'master' branch---it is likely that I only want it in 'maint', so
the signature on the object alone is insufficient.
The only assurance to you that 'maint' points at what I wanted to
place there comes from your trust on the hosting site and my
authentication with it, which cannot easily audited later.
Introduce a mechanism that allows you to sign a "push certificate"
(for the lack of better name) every time you push, asserting that
what object you are pushing to update which ref that used to point
at what other object. Think of it as a cryptographic protection for
ref updates, similar to signed tags/commits but working on an
orthogonal axis.
The basic flow based on this mechanism goes like this:
1. You push out your work with "git push --signed".
2. The sending side learns where the remote refs are as usual,
together with what protocol extension the receiving end
supports. If the receiving end does not advertise the protocol
extension "push-cert", an attempt to "git push --signed" fails.
Otherwise, a text file, that looks like the following, is
prepared in core:
certificate version 0.1
pusher Junio C Hamano <gitster@pobox.com> 1315427886 -0700
7339ca65... 21580ecb... refs/heads/master
3793ac56... 12850bec... refs/heads/next
The file begins with a few header lines, which may grow as we
gain more experience. The 'pusher' header records the name of
the signer (the value of user.signingkey configuration variable,
falling back to GIT_COMMITTER_{NAME|EMAIL}) and the time of the
certificate generation. After the header, a blank line follows,
followed by a copy of the protocol message lines.
Each line shows the old and the new object name at the tip of
the ref this push tries to update, in the way identical to how
the underlying "git push" protocol exchange tells the ref
updates to the receiving end (by recording the "old" object
name, the push certificate also protects against replaying). It
is expected that new command packet types other than the
old-new-refname kind will be included in push certificate in the
same way as would appear in the plain vanilla command packets in
unsigned pushes.
The user then is asked to sign this push certificate using GPG,
formatted in a way similar to how signed tag objects are signed,
and the result is sent to the other side (i.e. receive-pack).
In the protocol exchange, this step comes immediately before the
sender tells what the result of the push should be, which in
turn comes before it sends the pack data.
3. When the receiving end sees a push certificate, the certificate
is written out as a blob. The pre-receive hook can learn about
the certificate by checking GIT_PUSH_CERT environment variable,
which, if present, tells the object name of this blob, and make
the decision to allow or reject this push. Additionally, the
post-receive hook can also look at the certificate, which may be
a good place to log all the received certificates for later
audits.
Because a push certificate carry the same information as the usual
command packets in the protocol exchange, we can omit the latter
when a push certificate is in use and reduce the protocol overhead.
This however is not included in this patch to make it easier to
review (in other words, the series at this step should never be
released without the remainder of the series, as it implements an
interim protocol that will be incompatible with the final one).
As such, the documentation update for the protocol is left out of
this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous one for send-pack, make it easier and
cleaner to add to capability advertisement.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make a helper function to accept a line of a protocol message and
queue an update command out of the code from read_head_info().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This piece of code reads object names of shallow boundaries, not
old_sha1[], i.e. the current value the ref points at, which is to be
replaced by what is in new_sha1[].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, we should have also allowed the first "shallow" to carry
the feature request trailer, but that is water under the bridge
now. This makes the next step to factor out the queuing of commands
easier to review.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An "update" command in the protocol exchange consists of 40-hex old
object name, SP, 40-hex new object name, SP, and a refname, but the
first instance is further followed by a NUL with feature requests.
The command structure, which has a flex-array member that stores the
refname at the end, was allocated based on the whole length of the
update command, without excluding the trailing feature requests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second batch of the transactional ref update series.
* rs/ref-transaction-1: (22 commits)
update-ref --stdin: pass transaction around explicitly
update-ref --stdin: narrow scope of err strbuf
refs.c: make delete_ref use a transaction
refs.c: make prune_ref use a transaction to delete the ref
refs.c: remove lock_ref_sha1
refs.c: remove the update_ref_write function
refs.c: remove the update_ref_lock function
refs.c: make lock_ref_sha1 static
walker.c: use ref transaction for ref updates
fast-import.c: use a ref transaction when dumping tags
receive-pack.c: use a reference transaction for updating the refs
refs.c: change update_ref to use a transaction
branch.c: use ref transaction for all ref updates
fast-import.c: change update_branch to use ref transactions
sequencer.c: use ref transactions for all ref updates
commit.c: use ref transactions for updates
replace.c: use the ref transaction functions for updates
tag.c: use ref transactions when doing updates
refs.c: add transaction.status and track OPEN/CLOSED
refs.c: make ref_transaction_begin take an err argument
...
Wrap all the ref updates inside a transaction.
In the new API there is no distinction between failure to lock and
failure to write a ref. Both can be permanent (e.g., a ref
"refs/heads/topic" is blocking creation of the lock file
"refs/heads/topic/1.lock") or transient (e.g., file system full) and
there's no clear difference in how the client should respond, so
replace the two statuses "failed to lock" and "failed to write" with
a single status "failed to update ref". In both cases a more
detailed message is sent by sideband to diagnose the problem.
Example, before:
error: there are still refs under 'refs/heads/topic'
remote: error: failed to lock refs/heads/topic
To foo
! [remote rejected] HEAD -> topic (failed to lock)
After:
error: there are still refs under 'refs/heads/topic'
remote: error: Cannot lock the ref 'refs/heads/topic'.
To foo
! [remote rejected] HEAD -> topic (failed to update ref)
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to do this so could pass a mutable string to
enter_repo. But since 1c64b48 (enter_repo: do not modify
input, 2011-10-04), this is not necessary.
The resulting code is simpler, and it fixes a minor leak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
The trace API currently rechecks the environment variable and reopens the
trace file on every API call. This has the ugly side effect that errors
(e.g. file cannot be opened, or the user specified a relative path) are
also reported on every call. Performance can be improved by about factor
three by remembering the environment state and keeping the file open.
Replace the 'const char *key' parameter in the API with a pointer to a
'struct trace_key' that bundles the environment variable name with
additional, trace-internal state. Change the call sites of these APIs to
use a static 'struct trace_key' instead of a string constant.
In trace.c::get_trace_fd(), save and reuse the file descriptor in 'struct
trace_key'.
Add a 'trace_disable()' API, so that packet_trace() can cleanly disable
tracing when it encounters packed data (instead of using unsetenv()).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and copy steps match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes write tempfiles of the form "shallow_XXXXXX"
during fetch/push operations with shallow repositories.
Under normal circumstances, we clean up the result when we
are done. However, we do no take steps to clean up after
ourselves when we exit due to die() or signal death.
This patch teaches the tempfile creation code to register
handlers to clean up after ourselves. To handle this, we
change the ownership semantics of the filename returned by
setup_temporary_shallow. It now keeps a copy of the filename
itself, and returns only a const pointer to it.
We can also do away with explicit tempfile removal in the
callers. They all exit not long after finishing with the
file, so they can rely on the auto-cleanup, simplifying the
code.
Note that we keep things simple and maintain only a single
filename to be cleaned. This is sufficient for the current
caller, but we future-proof it with a die("BUG").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Commit 58babfff ("shallow.c: the 8 steps to select new commits for
.git/shallow", 05-12-2013) added a function to implement step 5 of
the quoted eight steps, namely 'remove_nonexistent_ours_in_pack()'.
This function implements an optional optimization step in the new
shallow commit selection algorithm. However, this function has no
callers. (The commented out call sites would need to change, in
order to provide information required by the function.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic 8 steps to update .git/shallow does not fully apply here
because the user may choose to accept just a few refs (while fetch
always accepts all refs). The steps are modified a bit.
1-6. same as before. After calling assign_shallow_commits_to_refs at
step 6, each shallow commit has a bitmap that marks all refs that
require it.
7. mark all "ours" shallow commits that are reachable from any
refs. We will need to do the original step 7 on them later.
8. go over all shallow commit bitmaps, mark refs that require new
shallow commits.
9. setup a strict temporary shallow file to plug all the holes, even
if it may cut some of our history short. This file is used by all
hooks. The hooks could use --shallow-file=$GIT_DIR/shallow to
overcome this and reach everything in current repo.
10. go over the new refs one by one. For each ref, do the reachability
test if it needs a shallow commit on the list from step 7. Remove
it if it's reachable from our refs. Gather all required shallow
commits, run check_everything_connected() with the new ref, then
install them to .git/shallow.
This mode is disabled by default and can be turned on with
receive.shallowupdate
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the preparation for adding --shallow-file to both
unpack-objects and index-pack. To sum up:
- struct argv_array used instead of const char **
- status/code, ip/child, unpacker/keeper are moved out to function
top level
- successful flow now ends at the end of the function
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If either receive-pack or upload-pack is called on a shallow
repository, shallow commits (*) will be sent after the ref
advertisement (but before the packet flush), so that the receiver has
the full "shape" of the sender's commit graph. This will be needed for
the receiver to update its .git/shallow if necessary.
This breaks the protocol for all clients trying to push to a shallow
repo, or fetch from one. Which is basically the same end result as
today's "is_repository_shallow() && die()" in receive-pack and
upload-pack. New clients will be made aware of shallow upstream and
can make use of this information.
The sender must send all shallow commits that are sent in the
following pack. It may send more shallow commits than necessary.
upload-pack for example may choose to advertise no shallow commits if
it knows in advance that the pack it's going to send contains no
shallow commits. But upload-pack is the server, so we choose the
cheaper way, send full .git/shallow and let the client deal with it.
Smart HTTP is not affected by this patch. Shallow support on
smart-http comes later separately.
(*) A shallow commit is a commit that terminates the revision
walker. It is usually put in .git/shallow in order to keep the
revision walker from going out of bound because there is no
guarantee that objects behind this commit is available.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
Expose lock_ref_sha1_basic's type_p argument to callers of
lock_any_ref_for_update. Update all call sites to ignore it by passing
NULL for now.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- From the beginning of push.c in 755225d, 2006-04-29, "thin" option
was enabled by default but could be turned off with --no-thin.
- Then Shawn changed the default to 0 in favor of saving server
resources in a4503a1, 2007-09-09. --no-thin worked great.
- One day later, in 9b28851 Daniel extracted some code from push.c to
create transport.c. He (probably accidentally) flipped the default
value from 0 to 1 in transport_get().
From then on --no-thin is effectively no-op because git-push still
expects the default value to be false and only calls
transport_set_option() when "thin" variable in push.c is true (which
is unnecessary). Correct the code to respect --no-thin by calling
transport_set_option() in both cases.
receive-pack learns about --reject-thin-pack-for-testing option,
which only is for testing purposes, hence no document update.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of "struct ref" in "cache.h", a header file so
central to the system, always confused me. This structure is not
about the local ref used by sha1-name API to name local objects.
It is what refspecs are expanded into, after finding out what refs
the other side has, to define what refs are updated after object
transfer succeeds to what values. It belongs to "remote.h" together
with "struct refspec".
While we are at it, also move the types and functions related to the
Git transport connection to a new header file connect.h
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack detects error in the pack header it received in
order to decide which of unpack-objects or index-pack to run, it
returned without closing the error stream, which led to a hang
sideband thread.
* jk/receive-pack-deadlocks-with-early-failure:
receive-pack: close sideband fd on early pack errors
Since commit a22e6f8 (receive-pack: send pack-processing
stderr over sideband, 2012-09-21), receive-pack will start
an async sideband thread to copy the stderr from our
index-pack or unpack-objects child to the client. We hand
the thread's input descriptor to unpack(), which puts it in
the "err" member of the "struct child_process".
After unpack() returns, we use finish_async() to reap the
sideband thread. The thread is only ready to die when it
gets EOF on its pipe, which is connected to the err
descriptor. So we expect all of the write ends of that pipe
to be closed as part of unpack().
Normally, this works fine. After start_command forks, it
closes the parent copy of the descriptor. Then once the
child exits (whether it was successful or not), that closes
the only remaining writer.
However, there is one code-path in unpack() that does not
handle this. Before we decide which of unpack-objects or
index-pack to use, we read the pack header ourselves to see
how many objects it contains. If there is an error here, we
exit without running either sub-command, the pipe descriptor
remains open, and we are in a deadlock, waiting for the
sideband thread to die (which is in turn waiting for us to
close the pipe).
We can fix this by making sure that unpack() always closes
the pipe before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:
1. The only variable-sized data in these lines is a ref
name, and refs tend to be a lot shorter than 1000
characters.
2. When sending ref lines, git-core always limits itself
to 1000 byte packets.
However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.
This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:
1. Other git implementations may have followed
protocol-common.txt and used a larger maximum size. We
don't bump into it in practice because it would involve
very long ref names.
2. We may want to increase the 1000-byte limit one day.
Since packets are transferred before any capabilities,
it's difficult to do this in a backwards-compatible
way. But if we bump the size of buffer the readers can
handle, eventually older versions of git will be
obsolete enough that we can justify bumping the
writers, as well. We don't have plans to do this
anytime soon, but there is no reason not to start the
clock ticking now.
Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage. That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.
This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.
As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.
Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility. However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.
This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.
By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch. The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
A repository may have refs that are only used for its internal
bookkeeping purposes that should not be exposed to the others that
come over the network.
Teach upload-pack to omit some refs from its initial advertisement
by paying attention to the uploadpack.hiderefs multi-valued
configuration variable. Do the same to receive-pack via the
receive.hiderefs variable. As a convenient short-hand, allow using
transfer.hiderefs to set the value to both of these variables.
Any ref that is under the hierarchies listed on the value of these
variable is excluded from responses to requests made by "ls-remote",
"fetch", etc. (for upload-pack) and "push" (for receive-pack).
Because these hidden refs do not count as OUR_REF, an attempt to
fetch objects at the tip of them will be rejected, and because these
refs do not get advertised, "git push :" will not see local branches
that have the same name as them as "matching" ones to be sent.
An attempt to update/delete these hidden refs with an explicit
refspec, e.g. "git push origin :refs/hidden/22", is rejected. This
is not a new restriction. To the pusher, it would appear that there
is no such ref, so its push request will conclude with "Now that I
sent you all the data, it is time for you to update the refs. I saw
that the ref did not exist when I started pushing, and I want the
result to point at this commit". The receiving end will apply the
compare-and-swap rule to this request and rejects the push with
"Well, your update request conflicts with somebody else; I see there
is such a ref.", which is the right thing to do. Otherwise a push to
a hidden ref will always be "the last one wins", which is not a good
default.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create find_hook() function to determine if a given hook exists and is
executable. If it is, the path to the script will be returned,
otherwise NULL is returned.
This encapsulates the tests that are used to check for the existence of
a hook in one place, making it easier to modify those checks if that is
found to be necessary. This also makes it simple for places that can
use a hook to check if a hook exists before doing, possibly lengthy,
setup work which would be pointless if no such hook is present.
The returned value is left as a static value from get_pathname() rather
than a duplicate because it is anticipated that the return value will
either be used as a boolean, immediately added to an argv_array list
which would result in it being duplicated at that point, or used to
actually run the command without much intervening work. Callers which
need to hold onto the returned value for a longer time are expected to
duplicate the return value themselves.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Send errors from "unpack-objects" and "index-pack" back to the "git
push" over the git and smart-http protocols, just like it is done
for a push over the ssh protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Receive-pack invokes either unpack-objects or index-pack to
handle the incoming pack. However, we do not redirect the
stderr of the sub-processes at all, so it is never seen by
the client. From the initial thread adding sideband support,
which is here:
http://thread.gmane.org/gmane.comp.version-control.git/139471
it is clear that some messages are specifically kept off the
sideband (with the assumption that they are of interest only
to an administrator, not the client). The stderr of the
subprocesses is mentioned in the thread, but it's unclear if
they are included in that group, or were simply forgotten.
However, there are a few good reasons to show them to the
client:
1. In many cases, they are directly about the incoming
packfile (e.g., fsck warnings with --strict, corruption
in the packfile, etc). Without these messages, the
client just gets "unpacker error" with no extra useful
diagnosis.
2. No matter what the cause, we are probably better off
showing the errors to the client. If the client and the
server admin are not the same entity, it is probably
much easier for the client to cut-and-paste the errors
they see than for the admin to try to dig them out of a
log and correlate them with a particular session.
3. Users of the ssh transport typically already see these
stderr messages, as the remote's stderr is copied
literally by ssh. This brings other transports (http,
and push-over-git if you are crazy enough to enable it)
more in line with ssh. As a bonus for ssh users,
because the messages are now fed through the sideband
and printed by the local git, they will have "remote:"
prepended and be properly interleaved with any local
output to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack-objects command should not generally produce any
output on stdout. However, if it's given extra input after
the packfile, it will spew the remainder to stdout. When
called by receive-pack, this means we will break protocol,
since our stdout is connected to the remote send-pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
* jc/capabilities:
fetch-pack: mention server version with verbose output
parse_feature_request: make it easier to see feature values
fetch-pack: do not ask for unadvertised capabilities
do not send client agent unless server does first
send-pack: fix capability-sending logic
include agent identifier in capability string
Some capabilities were asked by fetch-pack even when upload-pack did
not advertise that they are available. Fix fetch-pack not to do so.
* jc/capabilities:
fetch-pack: mention server version with verbose output
parse_feature_request: make it easier to see feature values
fetch-pack: do not ask for unadvertised capabilities
do not send client agent unless server does first
send-pack: fix capability-sending logic
include agent identifier in capability string
The original computed merge-base between the old commit and the new
commit and checked if the old commit was a merge base between them,
in order to make sure we are fast-forwarding.
Instead, call in_merge_bases(old, new) which does the same.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard output channel of receive-pack is a structured protocol
channel, and subprocesses must never be allowed to leak anything
into it by writing to their standard output.
Use RUN_COMMAND_STDOUT_TO_STDERR option to run_command_v_opt() just
like we do when running hooks to prevent output from "gc" leaking to
the standard output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having the client advertise a particular version
number in the git protocol, we have managed extensions and
backwards compatibility by having clients and servers
advertise capabilities that they support. This is far more
robust than having each side consult a table of
known versions, and provides sufficient information for the
protocol interaction to complete.
However, it does not allow servers to keep statistics on
which client versions are being used. This information is
not necessary to complete the network request (the
capabilities provide enough information for that), but it
may be helpful to conduct a general survey of client
versions in use.
We already send the client version in the user-agent header
for http requests; adding it here allows us to gather
similar statistics for non-http requests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Receive runs rev-list --verify-objects in order to detect missing
objects. However, such errors are ignored and overridden later.
Instead, consequently ignore all update commands for which an error has
already been detected.
Some tests in t5504 are obsoleted by this change, because invalid
objects are detected even if fsck is not enabled. Instead, they now test
for different error messages depending on whether or not fsck is turned
on. A better fix would be to force a corruption that will be detected by
fsck but not by rev-list.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
* mh/ref-api-less-extra-refs:
write_head_info(): handle "extra refs" locally
show_ref(): remove unused "flag" and "cb_data" arguments
receive-pack: move more work into write_head_info()
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been carefully choosing feature names used in the protocol
extensions so that the vocabulary does not contain a word that is a
substring of another word, so it is not a real problem, but we have
recently added "quiet" feature word, which would mean we cannot later
add some other word with "quiet" (e.g. "quiet-push"), which is awkward.
Let's make sure that we can eventually be able to do so by teaching the
clients and servers that feature words consist of non whitespace
letters. This parser also allows us to later add features with parameters
e.g. "feature=1.5" (parameter values need to be quoted for whitespaces,
but we will worry about the detauls when we do introduce them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code basically did:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
add_extra_ref(".have", sha1)
for each ref (including real refs and extra refs):
show_ref(refname, sha1)
But there is no need to stuff the alternate refs in extra_refs; we can
call show_ref() directly when iterating over the array, then handle
real refs separately. So change the code to:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
show_ref(".have", sha1)
for each ref (this now only includes real refs):
show_ref(refname, sha1)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is not used as a callback, so it doesn't need these
arguments. Also change its return type to void.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move some more code from the calling site into write_head_info(), and
inline add_alternate_refs() there. (Some more simplification is
coming, and it is easier if all this code is in the same place.)
Move some helper functions to avoid the need for forward declarations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer. Callers that
use this value longer than a couple of statements should copy the
value to avoid some hidden resolve_ref() call that may change the
static buffer's value.
The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c
demonstrates this. The first call is in cmd_merge()
branch = resolve_ref("HEAD", head_sha1, 0, &flag);
Then deep in lookup_commit_or_die() a few lines after, resolve_ref()
may be called again and destroy "branch".
lookup_commit_or_die
lookup_commit_reference
lookup_commit_reference_gently
parse_object
lookup_replace_object
do_lookup_replace_object
prepare_replace_object
for_each_replace_ref
do_for_each_ref
get_loose_refs
get_ref_dir
get_ref_dir
resolve_ref
All call sites are checked and made sure that xstrdup() is called if
the value should be saved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to delete a ref, it uses 0{40} as an object name to signal
that the request is a deletion. We shouldn't trigger "deletion of a
corrupt ref" warning in such a case, which was designed to notice that a
ref points at an object that is truly missing from the repository.
Reported-by: Stefan Näwe
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
When a push specifies deletion of non-existent refs, the post post-receive and
post-update hooks receive them as input/arguments.
For instance, for the following push, where refs/heads/nonexistent is a ref
which does not exist on the remote side:
git push origin :refs/heads/nonexistent
the post-receive hook receives from standard input:
<null-sha1> SP <null-sha1> SP refs/heads/nonexistent
and the post-update hook receives as arguments:
refs/heads/nonexistent
which does not make sense since it is a no-op.
Teach receive-pack not to pass non-existent refs to the post-receive and
post-update hooks. If the push only attempts to delete non-existent refs,
these hooks are not even called.
The update and pre-receive hooks are still notified about attempted
deletion of non-existent refs to give them a chance to inspect the
situation and act on it.
[jc: mild fix-ups to avoid introducing an extra list; also added fixes to
some tests]
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a hook has to make complex set-up to establish web of
communication between child process and multiplexer, which is common
regardless of what kind of data is fed to the hook. Refactor the parts
that is specific to the data fed to the particular set of hooks from the
part that runs the hook, so that the code can be reused to drive hooks
that take different kind of data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ffa69e61d3, reversing
changes made to 4a13c4d148.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This single variable can be used to set instead of setting fsckobjects
variable for fetch & receive independently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change upload-pack and receive-pack to use the namespace-prefixed refs
when working with the repository, and use the unprefixed refs when
talking to the client, maintaining the masquerade. This allows
clone, pull, fetch, and push to work with a suitably configured
GIT_NAMESPACE.
receive-pack advertises refs outside the current namespace as .have refs
(as it currently does for refs in alternates), so that the client can
use them to minimize data transfer but will otherwise ignore them.
With appropriate configuration, this also allows http-backend to expose
namespaces as multiple repositories with different paths. This only
requires setting GIT_NAMESPACE, which http-backend passes through to
upload-pack and receive-pack.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receiving a push, we advertise ref tips from any
alternate repositories, in case that helps the client send a
smaller pack. Since these refs don't actually exist in the
destination repository, we don't transmit the real ref
names, but instead use the pseudo-ref ".have".
If your alternate has a large number of duplicate refs (for
example, because it is aggregating objects from many related
repositories, some of which will have the same tags and
branch tips), then we will send each ".have $sha1" line
multiple times. This is a pointless waste of bandwidth, as
we are simply repeating the same fact to the client over and
over.
This patch eliminates duplicate .have refs early on. It does
so efficiently by sorting the complete list and skipping
duplicates. This has the side effect of re-ordering the
.have lines by ascending sha1; this isn't a problem, though,
as the original order was meaningless.
There is a similar .have system in fetch-pack, but it
does not suffer from the same problem. For each alternate
ref we consider in fetch-pack, we actually open the object
and mark it with the SEEN flag, so duplicates are
automatically culled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The foreach_alt_odb function triggers a callback for each
alternate object db we have, with room for a single void
pointer as data. Currently, we always call refs_from_alternate_cb
as the callback function, and then pass another callback (to
receive each ref individually) as the void pointer.
This has two problems:
1. C technically forbids stuffing a function pointer into
a "void *". In practice, this probably doesn't matter
on any architectures git runs on, but it never hurts to
follow the letter of the law.
2. There is no room for an extra data pointer. Indeed, the
alternate_ref_fn that refs_from_alternate_cb calls
takes a void* for data, but we always pass it NULL.
Instead, let's properly stuff our function pointer into a
data struct, which also leaves room for an extra
caller-supplied data pointer. And to keep things simple for
existing callers, let's make a for_each_alternate_ref
function that takes care of creating the extra struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-receive-pack-symref-alias:
t5516-fetch-push.sh: style cleanup
receive-pack: detect aliased updates which can occur with symrefs
receive-pack: switch global variable 'commands' to a parameter
Conflicts:
t/t5516-fetch-push.sh
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
