Commit 73c6de06af ("bisect: don't use invalid oid as rev when
starting") changes the behaviour of `git bisect` to consider invalid
oids as pathspecs again, as in the old shell implementation.
While that behaviour may be desirable, it can also cause confusion. For
example, while bisecting in a particular repo I encountered this:
$ git bisect start d93ff48803f0 v6.3
$
...which led to me sitting for a few moments, wondering why there's no
printout stating the first rev to check.
It turns out that the tag was actually "6.3", not "v6.3", and thus the
bisect was still silently started with only a bad rev, because
d93ff48803f0 was a valid oid and "v6.3" was silently considered to be a
pathspec.
While this behaviour may be desirable, it can be confusing, especially
with different repo conventions either using or not using "v" before
release names, or when a branch name or tag is simply misspelled on the
command line.
In order to avoid situations like this, make it more clear what we're
waiting for:
$ git bisect start d93ff48803f0 v6.3
status: waiting for good commit(s), bad commit known
We already have good output once the bisect process has begun in
earnest, so we don't need to do anything more there.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a run command cannot be executed or found, shells return exit code
126 or 127, respectively. Valid run commands are allowed to return
these codes as well to indicate bad revisions, though, for historical
reasons. This means typos can cause bogus bisect runs that go over the
full distance and end up reporting invalid results.
The best solution would be to reserve exit codes 126 and 127, like
71b0251cdd (Bisect run: "skip" current commit if script exit code is
125., 2007-10-26) did for 125, and abort bisect run when we get them.
That might be inconvenient for those who relied on the documentation
stating that 126 and 127 can be used for bad revisions, though.
The workaround used by this patch is to run the command on a known-good
revision and abort if we still get the same error code. This adds one
step to runs with scripts that use exit codes 126 and 127, but keeps
them supported, with one exception: It won't work with commands that
cannot recognize the (manually marked) known-good revision as such.
Run commands that use low exit codes are unaffected. Typos are reported
after executing the missing command twice and three checkouts (the first
step, the known good revision and back to the revision of the first
step).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that find_bisection() accepts multiple boolean arguments, these may
be combined into a single unsigned integer in order to declutter some of
the code in bisect.c
Also, rename the existing "flags" bitfield to "commit_flags", to
explicitly differentiate it from the new "bisect_flags" bitfield.
Based-on-patch-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_bisect__helper() is intended as a temporary shim layer serving as an
interface for git-bisect.sh. This function and git-bisect.sh should
eventually be replaced by a C implementation, cmd_bisect(), serving as
an entrypoint for all "git bisect ..." shell commands: cmd_bisect() will
only parse the first token following "git bisect", and dispatch the
remaining args to the appropriate function ["bisect_start()",
"bisect_next()", etc.].
Thus, cmd_bisect__helper() should not be responsible for parsing flags
like --no-checkout. Instead, let the --no-checkout flag remain in the
argv array, so it may be evaluated alongside the other options already
parsed by bisect_start().
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add first_parent_only parameter to find_bisection(), removing the
barrier that prevented combining the --bisect and --first-parent flags
when using git rev-list
Based-on-patch-by: Tiago Botelho <tiagonbotelho@hotmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
All the functions calling `bisect_next_all()` are already able to
handle return values from it.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
In `check_merge_bases()` there is an early success special case,
so we have introduced special error code
BISECT_INTERNAL_SUCCESS_MERGE_BASE (-11) which indicates early
success. This BISECT_INTERNAL_SUCCESS_MERGE_BASE is converted back
to BISECT_OK (0) in `check_good_are_ancestors_of_bad()`.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Emulate try catch in C by converting `exit(<positive-value>)` to
`return <negative-value>`. Follow POSIX conventions to return
<negative-value> to indicate error.
Update all callers to handle the error returns.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we want to get rid of git-bisect.sh, it would be necessary to
convert those exit() calls to return statements so that errors can be
reported.
Create an enum called `bisect_error` with the bisecting return codes
to use in `bisect.c` libification process.
Change bisect_next_all() to make it return this enum.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leak fixes.
* ma/bisect-leakfix:
bisect: fix memory leak when returning best element
bisect: fix off-by-one error in `best_bisection_sorted()`
bisect: fix memory leak in `find_bisection()`
bisect: change calling-convention of `find_bisection()`
This function takes a commit list and returns a commit list. The
returned list is built by modifying the original list. Thus the caller
should not use the original list again (and after the next commit fixes
a memory leak, it must not).
Change the function signature so that it takes a **list and has void
return type. That should make it harder to misuse this function.
While we're here, document this function.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement `bisect_clean_state` shell function in C and add a
`bisect-clean-state` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-clean-state` subcommand is a measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by bisect_reset() and bisect_start().
Also introduce a function `mark_for_removal` to store the refs which
need to be removed while iterating through the refs.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a file BISECT_TERMS in the repository .git to be read during a
bisection. There's no user-interface yet, but "git bisect" works if terms
other than old/new or bad/good are set in .git/BISECT_TERMS. The
fonctions to be changed if we add new terms are quite few.
In git-bisect.sh:
check_and_set_terms
bisect_voc
Co-authored-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Tweaked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Antoine Delaite <antoine.delaite@ensimag.grenoble-inp.fr>
Signed-off-by: Louis Stuber <stuberl@ensimag.grenoble-inp.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
When --quiet is specified, finish_object() is called instead of
show_object(). The latter is in charge of --verify-objects and
will be skipped if --quiet is specified.
Move the code up to finish_object(). Also pass the quiet flag along
and make it always call show_* functions to avoid similar problems in
future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c99f069 (bisect--helper: remove "--next-vars" option as it is
now useless - 2009-04-21), this flag has always been off. Remove the
flag and all related code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --no-checkout is specified, then the bisection process uses:
git update-ref --no-deref HEAD <trial>
at each trial instead of:
git checkout <trial>
Improved-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
because we will need to get more information from this function in
some later patches.
The new "int *count" parameter gives the number of commits left after
the skipped commit have been filtered out.
The new "int *skipped_first" parameter tells us if the first commit
in the list has been skipped. Note that using this parameter also
changes the behavior of the function if the first commit is indeed
skipped. Because we assume that in this case we will want all the
filtered commits, not just the first one, even if "show_all" is not
set.
So using a not NULL "skipped_first" parameter really means that we
plan to choose to test another commit than the first non skipped
one if the first commit in the list is skipped. That in turn means
that, in case the first commit is skipped, we have to return a
fully filtered list.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch replace the "--next-exit" option of "git bisect--helper"
with a "--next-all" option that does merge base checking using
the "check_good_are_ancestors_of_bad" function implemented in
"bisect.c" in a former patch.
The new "--next-all" option is then used in "git-bisect.sh" instead
of the "--next-exit" option, and all the shell functions in
"git-bisect.sh" that are now unused are removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it was used only by "git bisect--helper --next-vars" but
the "--next-vars" option has been removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it has been replaced by "--next-exit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch is to port more shell code from the "bisect_next"
function in "git-bisect.sh" to C code in "builtin-bisect--helper.c".
So we port the code that interprets the bisection result and stops or
continues (by checking out the next revision) the bisection process.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code, and while at it we create the
"print_commit_list" function that will be reused later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it will be used from "bisect.c" too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a cleanup patch to make it easier to use the
"show_bisect_vars" function and take advantage of the rev_list_info
struct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the last static variables that were used in
the "show_commit" function.
To do that, we create a new "rev_list_info" struct that we will pass
in the "void *data" argument to "show_commit".
This means that we have to change the first argument to
"show_bisect_vars" too.
While at it, we also remove a "struct commit_list *list" variable
in "cmd_rev_list" that is not really needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".
An array is used to store the skipped commits. But the array is
not yet fed anything.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
and declare it in "bisect.h" as we will use this function later.
While at it, rename its last argument "show_all" instead of
"bisect_find_all".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates new "bisect.c" and "bisect.h" files and move
bisect related code into these files.
While at it, we also remove some include directives that are not
needed any more from the beginning of "builtin-rev-list.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
