`git commit --cleanup=scissors -v` prints two scissors lines:
one at the start of the comment lines, and the other right before the
diff. This is redundant, and pushes the diff further down in the user's
editor than it needs to be.
Make wt_status_add_cut_line() remember if it has added a cut line before,
and avoid adding a redundant one.
Add a test for this.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Code clean-up.
* la/trailer-cleanups:
trailer: use offsets for trailer_start/trailer_end
trailer: find the end of the log message
commit: ignore_non_trailer computes number of bytes to ignore
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ignore_non_trailer() returns the _number of bytes_ that should be
ignored from the end of the log message. It does not by itself "ignore"
anything.
Rename this function to remove the leading "ignore" verb, to sound more
like a quantity than an action.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These error messages say "new_index" as if that spelling has some
significance to the end users (e.g. the file "$GIT_DIR/new_index"
has some issues), but that is not the case at all. The i18n folks
were made to include the word literally in the translated messages,
which was not a good idea at all. Spell it "new index", as we are
just telling the users that we failed to create a new index file.
The term is expected to be translated to the end-users' languages,
not left as if it were a literal file name.
This dates all the way back to the first re-implemenation of "git
commit" command in C (the scripted version did not have such wording
in its error messages), in f5bbc322 (Port git commit to C.,
2007-11-08).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places failed to differenciate the case where the index is
truly empty (nothing added) and we haven't yet read from the
on-disk index file, which have been corrected.
* js/empty-index-fixes:
commit -a -m: allow the top-level tree to become empty again
split-index: accept that a base index can be empty
do_read_index(): always mark index as initialized unless erroring out
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
Move functions that are not about pure string manipulation out of
strbuf.[ch]
* cw/strbuf-cleanup:
strbuf: remove global variable
path: move related function to path
object-name: move related functions to object-name
credential-store: move related functions to credential-store file
abspath: move related functions to abspath
strbuf: clarify dependency
strbuf: clarify API boundary
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
In 03267e8656 (commit: discard partial cache before (re-)reading it,
2022-11-08), a memory leak was plugged by discarding any partial index
before re-reading it.
The problem with this memory leak fix is that it was based on an
incomplete understanding of the logic introduced in 7168624c35 (Do not
generate full commit log message if it is not going to be used,
2007-11-28).
That logic was introduced to add a shortcut when committing without
editing the commit message interactively. A part of that logic was to
ensure that the index was read into memory:
if (!active_nr && read_cache() < 0)
die(...)
Translation to English: If the index has not yet been read, read it, and
if that fails, error out.
That logic was incorrect, though: It used `!active_nr` as an indicator
that the index was not yet read. Usually this is not a problem because
in the vast majority of instances, the index contains at least one
entry.
And it was natural to do it this way because at the time that condition
was introduced, the `index_state` structure had no explicit flag to
indicate that it was initialized: This flag was only introduced in
913e0e99b6 (unpack_trees(): protect the handcrafted in-core index from
read_cache(), 2008-08-23), but that commit did not adjust the code path
where no index file was found and a new, pristine index was initialized.
Now, when the index does not contain any entry (which is quite
common in Git's test suite because it starts quite a many repositories
from scratch), subsequent calls to `do_read_index()` will mistake the
index not to be initialized, and read it again unnecessarily.
This is a problem because after initializing the empty index e.g. the
`cache_tree` in that index could have been initialized before a
subsequent call to `do_read_index()` wants to ensure an initialized
index. And if that subsequent call mistakes the index not to have been
initialized, it would lead to leaked memory.
The correct fix for that memory leak is to adjust the condition so that
it does not mistake `active_nr == 0` to mean that the index has not yet
been read.
Using the `initialized` flag instead, we avoid that mistake, and as a
bonus we can fix a bug at the same time that was introduced by the
memory leak fix: When deleting all tracked files and then asking `git
commit -a -m ...` to commit the result, Git would internally update the
index, then discard and re-read the index undoing the update, and fail
to commit anything.
This fixes https://github.com/git-for-windows/git/issues/4462
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit --trailer=..." invokes the interpret-trailers
machinery, it knows what it feeds to interpret-trailers is a full
log message without any patch, but failed to express that by
passing the "--no-divider" option, which has been corrected.
* jk/commit-use-no-divider-with-interpret-trailers:
commit: pass --no-divider to interpret-trailers
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a preload-index.c file; move the declarations for the
functions in that file into a new preload-index.h. These were
previously split between cache.h and repository.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note in particular that this reverses the decision made in 118a2e8bde
("cache: move ensure_full_index() to cache.h", 2021-04-01).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function add_files_to_cache() is used by all three of builtin/{add,
checkout, commit}.c. That suggests this is common library code, and
should be moved somewhere else, like read-cache.c. However, the
function and its helpers made use of two global variables that made
straight code movement difficult:
* the_index
* include_sparse
The latter was perhaps more problematic since it was only accessible in
builtin/add.c but was still affecting builtin/checkout.c and
builtin/commit.c without this fact being very clear from the code. I'm
not sure if the other two callers would want to add a `--sparse` flag
similar to add.c to get non-default behavior, but exposing this
dependence will help if we ever decide we do want to add such a flag.
Modify add_files_to_cache() and its helpers to accept the necessary
arguments instead of relying on globals.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-commit sees any "--trailer" options, it passes the
COMMIT_EDITMSG file through git-interpret-trailers. But it does so
without passing --no-divider, which means that interpret-trailers will
look for a "---" divider to signal the end of the commit message.
That behavior doesn't make any sense in this context; we know we have a
complete and solitary commit message, not something we have to further
parse. And as a result, we'll do the wrong thing if the commit message
contains a "---" marker (which otherwise is not syntactically
significant), inserting any new trailers at the wrong spot.
We can fix this by passing --no-divider. This is the exact situation for
which it was added in 1688c9a489 (interpret-trailers: allow suppressing
"---" divider, 2018-08-22). As noted in the message for that commit, it
just adds the mechanism, and further patches were needed to trigger it
from various callers. We did that back then in a few spots, like
ffce7f590f (sequencer: ignore "---" divider when parsing trailers,
2018-08-22), but obviously missed this one.
Reported-by: <eric.frederich@siemens.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a library that only interacts with other primitives, strbuf should
not utilize the comment_line_char global variable within its
functions. Therefore, add an additional parameter for functions that use
comment_line_char and refactor callers to pass it in instead.
strbuf_stripspace() removes the skip_comments boolean and checks if
comment_line_char is a non-NUL character to determine whether to skip
comments or not.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output may become confusing to recognize if the user
accidentally gave an extra opening space, like:
$ git commit --fixup=" 6d6360b67e99c2fd82d64619c971fdede98ee74b"
fatal: could not lookup commit 6d6360b67e99c2fd82d64619c971fdede98ee74b
and it will be better if we surround the %s specifier with single quotes.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h and strbuf.[ch] had editor-related functions. Move these into
editor.[ch].
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forcing each command to choose to honor GPG related
configuration variables, make the subsystem lazily initialize
itself.
* jc/gpg-lazy-init:
drop pure pass-through config callbacks
gpg-interface: lazily initialize and read the configuration
Have the last users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use the
underlying *_index() variants instead. Now all previous users of
"USE_THE_INDEX_COMPATIBILITY_MACROS" have been migrated away from the
wrapper macros, and if applicable to use the "USE_THE_INDEX_VARIABLE"
added in [1].
Let's leave the "index-compatibility.cocci" in place, even though it
won't be doing anything on "master". It will benefit any out-of-tree
code that need to use these compatibility macros. We can eventually
remove it.
1. bdafeae0b9 (cache.h & test-tool.h: add & use
"USE_THE_INDEX_VARIABLE", 2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the redundant update_main_cache_tree() function, and make its
users use cache_tree_update() instead.
The behavior of populating the "the_index.cache_tree" if it wasn't
present already was needed when this function was introduced in [1],
but it hasn't been needed since [2]; The "cache_tree_update()" will
now lazy-allocate, so there's no need for the wrapper.
1. 996277c520 (Refactor cache_tree_update idiom from commit,
2011-12-06)
2. fb0882648e (cache-tree: clean up cache_tree_update(), 2021-01-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the "active_nr" part of "index-compatibility.pending.cocci",
which was left out in [1] due to an in-flight conflict. As of [2] the
topic we conflicted with has been merged to "master", so we can fully
apply this rule.
1. dc594180d9 (cocci & cache.h: apply variable section of "pending"
index-compatibility, 2022-11-19)
2. 9ea1378d04 (Merge branch 'ab/various-leak-fixes', 2022-12-14)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forcing the porcelain commands to always read the
configuration variables related to the signing and verifying
signatures, lazily initialize the necessary subsystem on demand upon
the first use.
This hopefully would make it more future-proof as we do not have to
think and decide whether we should call git_gpg_config() in the
git_config() callback for each command.
A few git_config() callback functions that used to be custom
callbacks are now just a thin wrapper around git_default_config().
We could further remove, git_FOO_config and replace calls to
git_config(git_FOO_config) with git_config(git_default_config), but
to make it clear which ones are affected and the effect is only the
removal of git_gpg_config(), it is vastly preferred not to do such a
change in this step (they can be done on top once the dust settled).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
For a lot of uses of UNLEAK() it would be quite tricky to release the
memory involved, or we're missing the relevant *_(release|clear)()
functions. But in these cases we have them already, and can just
invoke them on the variable(s) involved, instead of UNLEAK().
For "builtin/worktree.c" the UNLEAK() was also added in [1], but the
struct member it's unleaking was removed in [2]. The only non-"int"
member of that structure is "const char *keep_locked", which comes to
us via "argv" or a string literal[3].
We have good visibility via the compiler and
tooling (e.g. SANITIZE=address) on bad free()-ing, but none on
UNLEAK() we don't need anymore. So let's prefer releasing the memory
when it's easy.
For "bugreport", "worktree" and "config" we need to start using a "ret
= ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were
added in [4], and for "builtin/config.c" in [1].
For "config" the code seen here was the only user of the "value"
variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to
return the right exit code in the cases where we were relying on
falling through to the top-level.
I think there's still a use-case for UNLEAK(), but hat it's changed
since then. Using it so that "we can see the real leaks" is
counter-productive in these cases.
It's more useful to have UNLEAK() be a marker of the remaining odd
cases where it's hard to free() the memory for whatever reason. With
this change less than 20 of them remain in-tree.
1. 0e5bba53af (add UNLEAK annotation for reducing leak false
positives, 2017-09-08)
2. d861d34a6e (worktree: remove extra members from struct add_opts,
2018-04-24)
3. 0db4961c49 (worktree: teach `add` to accept --reason <string> with
--lock, 2021-07-15)
4. 0e5bba53af and 00d8c31105 (commit: fix "author_ident" leak,
2022-05-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The read_cache() in prepare_to_commit() would end up clobbering the
pointer we had for a previously populated "the_index.cache_tree" in
the very common case of "git commit" stressed by e.g. the tests being
changed here.
We'd populate "the_index.cache_tree" by calling
"update_main_cache_tree" in prepare_index(), but would not end up with
a "fully prepared" index. What constitutes an existing index is
clearly overly fuzzy, here we'll check "active_nr" (aka
"the_index.cache_nr"), but our "the_index.cache_tree" might have been
malloc()'d already.
Thus the code added in 11c8a74a64 (commit: write cache-tree data when
writing index anyway, 2011-12-06) would end up allocating the
"cache_tree", and would interact here with code added in
7168624c35 (Do not generate full commit log message if it is not
going to be used, 2007-11-28). The result was a very common memory
leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
Make the "-h" output of "git commit" consistent with the *.txt version
by exhaustively listing the options that it takes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct uses of "<label>..." where we really meant to say
"[<label>...]", i.e. the command in question taken an optional set of
"<label>". As the CodingGuidelines notes "[o]ptional parts [should be]
enclosed in square brackets".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback function for --trailer writes directly to the global
trailer_args and ignores opt->value completely. This is OK, since that's
where we expect to find the value. But it does mean the option
declaration isn't as clear. E.g., we have:
OPT_BOOL(0, "reset-author", &renew_authorship, ...),
OPT_CALLBACK_F(0, "trailer", NULL, ..., opt_pass_trailer)
In the first one we can see where the result will be stored, but in the
second, we get only NULL, and you have to go read the callback.
Let's pass &trailer_args, and use it in the callback. As a bonus, this
silences a -Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...