Add a job to GitLab CI which runs tests on macOS, which matches the
equivalent "osx-clang" job that we have for GitHub Workflows. One
significant difference though is that this new job runs on Apple M1
machines and thus uses the "arm64" architecture. As GCC does not yet
support this comparatively new architecture we cannot easily include an
equivalent for the "osx-gcc" job that exists in GitHub Workflows.
Note that one test marked as `test_must_fail` is surprisingly passing:
t7815-grep-binary.sh (Wstat: 0 Tests: 22 Failed: 0)
TODO passed: 12
This seems to boil down to an unexpected difference in how regcomp(3P)
works when matching NUL bytes. Cross-checking with the respective GitHub
job shows that this is not an issue unique to the GitLab CI job as it
passes in the same way there.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setting up Perforce on macOS we put both `p4` and `p4d` into
"$HOME/bin". On GitHub CI this directory is indeed contained in the PATH
environment variable and thus there is no need for additional setup than
to put the binaries there. But GitLab CI does not do this, and thus our
Perforce-based tests would be skipped there even though we download the
binaries.
Refactor the setup code to become more robust by downloading binaries
into a separate directory which we then manually append to our PATH.
This matches what we do on Linux-based jobs.
Note that it may seem like we already did append "$HOME/bin" to PATH
because we're actually removing the lines that adapt PATH. But we only
ever adapted the PATH variable in "ci/install-dependencies.sh", and
didn't adapt it when running "ci/run-build-and-test.sh". Consequently,
the required binaries wouldn't be found during the test run unless the
CI platform already had the "$HOME/bin" in PATH right from the start.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way CI testing used "prove" could lead to running the test
suite twice needlessly, which has been corrected.
* js/ci-discard-prove-state:
ci: avoid running the test suite _twice_
Add support for GitLab CI.
* ps/ci-gitlab:
ci: add support for GitLab CI
ci: install test dependencies for linux-musl
ci: squelch warnings when testing with unusable Git repo
ci: unify setup of some environment variables
ci: split out logic to set up failed test artifacts
ci: group installation of Docker dependencies
ci: make grouping setup more generic
ci: reorder definitions for grouping functions
This is a late amendment of 4a6e4b9602 (CI: remove Travis CI support,
2021-11-23), whereby the `.prove` file (being written by the `prove`
command that is used to run the test suite) is no longer retained
between CI builds: This feature was only ever used in the Travis CI
builds, we tried for a while to do the same in Azure Pipelines CI runs
(but I gave up on it after a while), and we never used that feature in
GitHub Actions (nor does the new GitLab CI code use it).
Retaining the Prove cache has been fragile from the start, even though
the idea seemed good at the time, the idea being that the `.prove` file
caches information about previous `prove` runs (`save`) and uses them
(`slow`) to run the tests in the order from longer-running to shorter
ones, making optimal use of the parallelism implied by `--jobs=<N>`.
However, using a Prove cache can cause some surprising behavior: When
the `prove` caches information about a test script it has run,
subsequent `prove` runs (with `--state=slow`) will run the same test
script again even if said script is not specified on the `prove`
command-line!
So far, this bug did not matter. Right until d8f416bbb8 (ci: run unit
tests in CI, 2023-11-09) did it not matter.
But starting with that commit, we invoke `prove` _twice_ in CI, once to
run the regular test suite of regression test scripts, and once to run
the unit tests. Due to the bug, the second invocation re-runs all of the
tests that were already run as part of the first invocation. This not
only wastes build minutes, it also frequently causes the `osx-*` jobs to
fail because they already take a long time and now are likely to run
into a timeout.
The worst part about it is that there is actually no benefit to keep
running with `--state=slow,save`, ever since we decided no longer to
try to reuse the Prove cache between CI runs.
So let's just drop that Prove option and live happily ever after.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already support Azure Pipelines and GitHub Workflows in the Git
project, but until now we do not have support for GitLab CI. While it is
arguably not in the interest of the Git project to maintain a ton of
different CI platforms, GitLab has recently ramped up its efforts and
tries to contribute to the Git project more regularly.
Part of a problem we hit at GitLab rather frequently is that our own,
custom CI setup we have is so different to the setup that the Git
project has. More esoteric jobs like "linux-TEST-vars" that also set a
couple of environment variables do not exist in GitLab's custom CI
setup, and maintaining them to keep up with what Git does feels like
wasted time. The result is that we regularly send patch series upstream
that fail to compile or pass tests in GitHub Workflows. We would thus
like to integrate the GitLab CI configuration into the Git project to
help us send better patch series upstream and thus reduce overhead for
the maintainer. Results of these pipeline runs will be made available
(at least) in GitLab's mirror of the Git project at [1].
This commit introduces the integration into our regular CI scripts so
that most of the setup continues to be shared across all of the CI
solutions. Note that as the builds on GitLab CI run as unprivileged
user, we need to pull in both sudo and shadow packages to our Alpine
based job to set this up.
[1]: https://gitlab.com/gitlab-org/git
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our CI jobs that run on Docker also use mostly the same architecture to
build and test Git via the "ci/run-build-and-tests.sh" script. These
scripts also provide some functionality to massage the Git repository
we're supposedly operating in.
In our Docker-based infrastructure we may not even have a Git repository
available though, which leads to warnings when those functions execute.
Make the helpers exit gracefully in case either there is no Git in our
PATH, or when not running in a Git repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both GitHub Actions and Azure Pipelines set up the environment variables
GIT_TEST_OPTS, GIT_PROVE_OPTS and MAKEFLAGS. And while most values are
actually the same, the setup is completely duplicate. With the upcoming
support for GitLab CI this duplication would only extend even further.
Unify the setup of those environment variables so that only the uncommon
parts are separated. While at it, we also perform some additional small
improvements:
- We now always pass `--state=failed,slow,save` via GIT_PROVE_OPTS.
It doesn't hurt on platforms where we don't persist the state, so
this further reduces boilerplate.
- When running on Windows systems we set `--no-chain-lint` and
`--no-bin-wrappers`. Interestingly though, we did so _after_
already having exported the respective environment variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have some logic in place to create a directory with the output from
failed tests, which will then subsequently be uploaded as CI artifacts.
We're about to add support for GitLab CI, which will want to reuse the
logic.
Split the logic into a separate function so that it is reusable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the grouping setup more generic by always calling `begin_group ()`
and `end_group ()` regardless of whether we have stubbed those functions
or not. This ensures we can more readily add support for additional CI
platforms.
Furthermore, the `group ()` function is made generic so that it is the
same for both GitHub Actions and for other platforms. There is a
semantic conflict here though: GitHub Actions used to call `set +x` in
`group ()` whereas the non-GitHub case unconditionally uses `set -x`.
The latter would get overriden if we kept the `set +x` in the generic
version of `group ()`. To resolve this conflict, we simply drop the `set
+x` in the generic variant of this function. As `begin_group ()` calls
`set -x` anyway this is not much of a change though, as the only
commands that aren't printed anymore now are the ones between the
beginning of `group ()` and the end of `begin_group ()`.
Last, this commit changes `end_group ()` to also accept a parameter that
indicates _which_ group should end. This will be required by a later
commit that introduces support for GitLab CI.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We define a set of grouping functions that are used to group together
output in our CI, where these groups then end up as collapsible sections
in the respective pipeline platform. The way these functions are defined
is not easily extensible though as we have an up front check for the CI
_not_ being GitHub Actions, where we define the non-stub logic in the
else branch.
Reorder the conditional branches such that we explicitly handle GitHub
Actions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In April, GitHub announced that the `macos-13` pool is available:
https://github.blog/changelog/2023-04-24-github-actions-macos-13-is-now-available/.
It is only a matter of time until the `macos-12` pool is going away,
therefore we should switch now, without pressure of a looming deadline.
Since the `macos-13` runners no longer include Python2, we also drop
specifically testing with Python2 and switch uniformly to Python3, see
https://github.com/actions/runner-images/blob/HEAD/images/macos/macos-13-Readme.md
for details about the software available on the `macos-13` pool's
runners.
Also, on macOS 13, Homebrew seems to install a `gcc@9` package that no
longer comes with a regular `unistd.h` (there seems only to be a
`ssp/unistd.h`), and hence builds would fail with:
In file included from base85.c:1:
git-compat-util.h:223:10: fatal error: unistd.h: No such file or directory
223 | #include <unistd.h>
| ^~~~~~~~~~
compilation terminated.
The reason why we install GCC v9.x explicitly is historical, and back in
the days it was because it was the _newest_ version available via
Homebrew: 176441bfb5 (ci: build Git with GCC 9 in the 'osx-gcc' build
job, 2019-11-27).
To reinstate the spirit of that commit _and_ to fix that build failure,
let's switch to the now-newest GCC version: v13.x.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while, the `git-p4` tests flake for reasons outside of
our control. It typically fails with "Connection refused" e.g. here:
https://github.com/git/git/actions/runs/5969707156/job/16196057724
[...]
+ git p4 clone --dest=/home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git //depot
Initialized empty Git repository in /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git/.git/
Perforce client error:
Connect to server failed; check $P4PORT.
TCP connect to localhost:9807 failed.
connect: 127.0.0.1:9807: Connection refused
failure accessing depot: could not run p4
Importing from //depot into /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git
[...]
This happens in other jobs, too, but in the `linux-asan-ubsan` job it
hurts the most because that job often takes over a full hour to run,
therefore re-running a failed `linux-asan-ubsan` job is _very_ costly.
The purpose of the `linux-asan-ubsan` job is to exercise the C code of
Git, anyway, and any part of Git's source code that the `git-p4` tests
run and that would benefit from the attention of ASAN/UBSAN are run
better in other tests anyway, as debugging C code run via Python scripts
can get a bit hairy.
In fact, it is not even just `git-p4` that is the problem (even if it
flakes often enough to be problematic in the CI builds), but really the
part about Python scripts. So let's just skip any Python parts of the
tests from being run in that job.
For good measure, also skip the Subversion tests because debugging C
code run via Perl scripts is as much fun as debugging C code run via
Python scripts. And it will reduce the time this very expensive job
takes, which is a big benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we started running sanitizers in CI via 1c0962c0c4 (ci: add address
and undefined sanitizer tasks, 2022-10-20), we ran them as two separate
CI jobs, since as that commit notes, the combination "seems to take
forever".
And indeed, it does with gcc. However, since the previous commit
switched to using clang, the situation is different, and we can save
some CPU by using a single job for both. Comparing before/after CI runs,
this saved about 14 minutes (the single combined job took 54m, versus
44m plus 24m for ASan and UBSan jobs, respectively). That's wall-clock
and not CPU, but since our jobs are mostly CPU-bound, the two should be
closely proportional.
This does increase the end-to-end time of a CI run, though, since before
this patch the two jobs could run in parallel, and the sanitizer job is
our longest single job. It also means that we won't get a separate
result for "this passed with UBSan but not with ASan" or vice versa).
But as 1c0962c0c4 noted, that is not a very useful signal in practice.
Below are some more detailed timings of gcc vs clang that I measured by
running the test suite on my local workstation. Each measurement counts
only the time to run the test suite with each compiler (not the compile
time itself). We'll focus on the wall-clock times for simplicity, though
the CPU times follow roughly similar trends.
Here's a run with CC=gcc as a baseline:
real 1m12.931s
user 9m30.566s
sys 8m9.538s
Running with SANITIZE=address increases the time by a factor of ~4.7x:
real 5m40.352s
user 49m37.044s
sys 36m42.950s
Running with SANITIZE=undefined increases the time by a factor of ~1.7x:
real 2m5.956s
user 12m42.847s
sys 19m27.067s
So let's call that 6.4 time units to run them separately (where a unit
is the time it takes to run the test suite with no sanitizers). As a
simplistic model, we might imagine that running them together would take
5.4 units (we save 1 unit because we are no longer running the test
suite twice, but just paying the sanitizer overhead on top of a single
run).
But that's not what happens. Running with SANITIZE=address,undefined
results in a factor of 9.3x:
real 11m9.817s
user 77m31.284s
sys 96m40.454s
So not only did we not get faster when doing them together, we actually
spent 1.5x as much CPU as doing them separately! And while those
wall-clock numbers might not look too terrible, keep in mind that this
is on an unloaded 8-core machine. In the CI environment, wall-clock
times will be much closer to CPU times. So not only are we wasting CPU,
but we risk hitting timeouts.
Now let's try the same thing with clang. Here's our no-sanitizer
baseline run, which is almost identical to the gcc one (which is quite
convenient, because we can keep using the same "time units" to get an
apples-to-apples comparison):
real 1m11.844s
user 9m28.313s
sys 8m8.240s
And now again with SANITIZE=address, we get a 5x factor (so slightly
worse than gcc's 4.7x, though I wouldn't read too much into it; there is
a fair bit of run-to-run noise):
real 6m7.662s
user 49m24.330s
sys 44m13.846s
And with SANITIZE=undefined, we are at 1.5x, slightly outperforming gcc
(though again, that's probably mostly noise):
real 1m50.028s
user 11m0.973s
sys 16m42.731s
So running them separately, our total cost is 6.5x. But if we combine
them in a single run (SANITIZE=address,undefined), we get:
real 6m51.804s
user 52m32.049s
sys 51m46.711s
which is a factor of 5.7x. That's along the lines we'd hoped for!
Running them together saves us almost a whole time unit. And that's not
counting any time spent outside the test suite itself (starting the job,
setting up the environment, compiling) that we're no longer duplicating
by having two jobs.
So clang behaves like we'd hope: the overhead to run the sanitizers is
additive as you add more sanitizers. Whereas gcc's numbers seem very
close to multiplicative, almost as if the sanitizers were enforcing
their overheads on each other (though that is purely a guess on what is
going on; ultimately what matters to us is the amount of time it takes).
And that roughly matches the CI improvement I saw. A "time unit" there
is more like 12 minutes, and the observed time savings was 14 minutes
(with the extra presumably coming from avoiding duplicated setup, etc).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the sha1collisiondetection library was added and made the default
in [1] the interaction with APPLE_COMMON_CRYPTO added in [2] and [3]
seems to have been missed. On modern OSX and Darwin we are able to use
Apple's CommonCrypto both for SHA-1, and as a generic (but partial)
OpenSSL replacement.
This left OSX and Darwin without protection against the SHAttered
attack when building Git in its default configuration.
Let's also use sha1collisiondetection on OSX, to do so we'll need to
split up the "APPLE_COMMON_CRYPTO" flag into that flag and a new
"APPLE_COMMON_CRYPTO_SHA1".
Because of this we can stop conflating whether we want to use Apple's
CommonCrypto at all, and whether we want to use it for SHA-1. This
makes the CI recipe added in [4] simpler.
1. e6b07da278 (Makefile: make DC_SHA1 the default, 2017-03-17)
2. 4dcd7732db (Makefile: add support for Apple CommonCrypto facility, 2013-05-19)
3. 61067954ce (cache.h: eliminate SHA-1 deprecation warnings on Mac OS X, 2013-05-19)
4. 1ad5c3df35 (ci: use DC_SHA1=YesPlease on osx-clang job for CI,
2022-10-20)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per [1] and the warnings our CI is emitting GitHub is phasing in
"macos-12" as their "macos-latest".
As with [2], let's pin our image to a specific version so that we're
not having it swept from under us, and our upgrade cycle can be more
predictable than whenever GitHub changes their images.
1. https://github.com/actions/runner-images/issues/6384
2. 0178420b9c (github-actions: run gcc-8 on ubuntu-20.04 image,
2022-11-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the GitHub CI to newer ubuntu release.
* jx/ci-ubuntu-fix:
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
github-actions: run gcc-8 on ubuntu-20.04 image
Python is missing from the default ubuntu-22.04 runner image, which
prevents git-p4 from working. To install python on ubuntu, we need
to provide the correct package names:
* On Ubuntu 18.04 (bionic), "/usr/bin/python2" is provided by the
"python" package, and "/usr/bin/python3" is provided by the "python3"
package.
* On Ubuntu 20.04 (focal) and above, "/usr/bin/python2" is provided by
the "python2" package which has a different name from bionic, and
"/usr/bin/python3" is provided by "python3".
Since the "ubuntu-latest" runner image has a higher version, its
safe to use "python2" or "python3" package name.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There would be a segmentation fault when running p4 v16.2 on ubuntu
22.04 which is the latest version of ubuntu runner image for github
actions.
By checking each version from [1], p4d version 21.1 and above can work
properly on ubuntu 22.04. But version 22.x will break some p4 test
cases. So p4 version 21.x is exactly the version we can use.
With this update, the versions of p4 for Linux and macOS happen to be
the same. So we can add the version number directly into the "P4WHENCE"
variable, and reuse it in p4 installation for macOS.
By removing the "LINUX_P4_VERSION" variable from "ci/lib.sh", the
comment left above has nothing to do with p4, but still applies to
git-lfs. Since we have a fixed version of git-lfs installed on Linux,
we may have a different version on macOS.
[1]: https://cdist2.perforce.com/perforce/
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitHub starts to upgrade its runner image "ubuntu-latest" from version
"ubuntu-20.04" to version "ubuntu-22.04". It will fail to find and
install "gcc-8" package on the new runner image.
Change some of the runner images from "ubuntu-latest" to "ubuntu-20.04"
in order to install "gcc-8" as a dependency.
The first revision of this patch tried to replace "$runs_on_pool" in
"ci/*.sh" with a new "$runs_on_os" environment variable based on the
"os" field in the matrix strategy. But these "os" fields in matrix
strategies are obsolete legacies from commit [1] and commit [2], and
are no longer useful. So remove these unused "os" fields.
[1]: c08bb26010 (CI: rename the "Linux32" job to lower-case "linux32",
2021-11-23)
[2]: 25715419bf (CI: don't run "make test" twice in one job, 2021-11-23)
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Address the root cause of technical debt we've been carrying since
sha1collisiondetection was made the default in [1]. In a preceding
commit we narrowly fixed a bug where the "DC_SHA1" variable would be
unset (in combination with "NO_APPLE_COMMON_CRYPTO=" on OSX), even
though we had the sha1collisiondetection library enabled.
But the only reason we needed to have such a user-exposed knob went
away with [1], and it's been doing nothing useful since then. We don't
care if you define DC_SHA1=*, we only care that you don't ask for any
other SHA-1 implementation. If it turns out that you didn't, we'll use
sha1collisiondetection, whether you had "DC_SHA1" set or not.
As a result of this being confusing we had e.g. [2] for cmake and the
recent [3] for ci/lib.sh setting "DC_SHA1" explicitly, even though
this was always a NOOP.
A much simpler way to do this is to stop having the Makefile and
CMakeLists.txt set "DC_SHA1" to be picked up by the test-lib.sh, let's
instead add a trivial "test-tool sha1-is-sha1dc". It returns zero if
we're using sha1collisiondetection, non-zero otherwise.
1. e6b07da278 (Makefile: make DC_SHA1 the default, 2017-03-17)
2. c4b2f41b5f (cmake: support for testing git with ctest, 2020-06-26)
3. 1ad5c3df35 (ci: use DC_SHA1=YesPlease on osx-clang job for CI,
2022-10-20)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
7b8cfe34 (Merge branch 'ed/fsmonitor-on-networked-macos',
2022-10-17) broke the build on macOS with sha1dc by bypassing our
hash abstraction (git_SHA_CTX etc.), but it wasn't caught before the
problematic topic was merged down to the 'master' branch. Nobody
was even compile testing with DC_SHA1 set, although it is the
recommended choice in these days for folks when they use SHA-1.
This was because the default for macOS uses Apple Common Crypto, and
both of the two CI jobs did not override the default. Tweak one of
them to use DC_SHA1 to improve the coverage.
We may want to give similar diversity for Linux jobs so that some of
them build with other implementations of SHA-1; they currently all
build and test with DC_SHA1 as that is the default on everywhere
other than macOS.
But let's start small to fill only the immediate need.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code is clean with these two sanitizers, and we would
like to keep it that way by running the checks for any new code.
The signal of "passed with asan, but not ubsan" (or vice versa) is
not that useful in practice, so it is tempting to run both santizers
in a single task, but it seems to take forever, so tentatively let's
try having two separate ones.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in a preceding commit the leak checking done by
"GIT_TEST_PASSING_SANITIZE_LEAK=true" (added in [1]) is incomplete
without combining it with "GIT_TEST_SANITIZE_LEAK_LOG=true".
Let's run our CI with that, to ensure that we catch cases where our
tests are missing the abort() exit code resulting from a leak for
whatever reason. The reasons for that are discussed in detail in a
preceding commit.
1. 956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in
CI, 2021-09-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GCC produces those helpful errors, we will want to present them in
the GitHub workflow runs in the most helpful manner. To that end, we
want to use workflow commands to render errors and warnings:
https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions
In the previous commit, we ensured that grouping is used for the build
in all jobs, and this allows us to piggy-back onto the `group` function
to transmogrify the output.
Note: If `set -o pipefail` was available, we could do this in a little
more elegant way. But since some of the steps are run using `dash`, we
have to do a little `{ ...; echo $? >exit.status; } | ...` dance.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git now shows better information in the GitHub workflow runs when a test
case failed. However, when a test case was implemented incorrectly and
therefore does not even run, nothing is shown.
Let's bring back the step that prints the full logs of the failed tests,
and to improve the user experience, print out an informational message
for readers so that they do not have to know/remember where to see the
full logs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The full logs are contained in the `failed-tests-*.zip` artifacts that
are attached to the failed CI run. Since this is not immediately
obvious to the well-disposed reader, let's mention it explicitly.
Suggested-by: Victoria Dye <vdye@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the output easier to digest.
Note: since workflow output currently cannot contain any nested groups
(see https://github.com/actions/runner/issues/802 for details), we need
to remove the explicit grouping that would span the entirety of each
failed test script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current output of Git's GitHub workflow can be quite confusing,
especially for contributors new to the project.
To make it more helpful, let's introduce some collapsible grouping.
Initially, readers will see the high-level view of what actually
happened (did the build fail, or the test suite?). To drill down, the
respective group can be expanded.
Note: sadly, workflow output currently cannot contain any nested groups
(see https://github.com/actions/runner/issues/802 for details),
therefore we take pains to ensure to end any previous group before
starting a new one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When investigating a test failure, the time that matters most is the
time it takes from getting aware of the failure to displaying the output
of the failing test case.
You currently have to know a lot of implementation details when
investigating test failures in the CI runs. The first step is easy: the
failed job is marked quite clearly, but when opening it, the failed step
is expanded, which in our case is the one running
`ci/run-build-and-tests.sh`. This step, most notably, only offers a
high-level view of what went wrong: it prints the output of `prove`
which merely tells the reader which test script failed.
The actually interesting part is in the detailed log of said failed
test script. But that log is shown in the CI run's step that runs
`ci/print-test-failures.sh`. And that step is _not_ expanded in the web
UI by default. It is even marked as "successful", which makes it very
easy to miss that there is useful information hidden in there.
Let's help the reader by showing the failed tests' detailed logs in the
step that is expanded automatically, i.e. directly after the test suite
failed.
This also helps the situation where the _build_ failed and the
`print-test-failures` step was executed under the assumption that the
_test suite_ failed, and consequently failed to find any failed tests.
An alternative way to implement this patch would be to source
`ci/print-test-failures.sh` in the `handle_test_failures` function to
show these logs. However, over the course of the next few commits, we
want to introduce some grouping which would be harder to achieve that
way (for example, we do want a leaner, and colored, preamble for each
failed test script, and it would be trickier to accommodate the lack of
nested groupings in GitHub workflows' output).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b92cb86ea1 (travis-ci: check that all build artifacts are
.gitignore-d, 2017-12-31), a function was introduced with a code style
that is different from the surrounding code: it added the opening curly
brace on its own line, when all the existing functions in the same file
cuddle that brace on the same line as the function name.
Let's make the code style consistent again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 707d2f2fe8 (CI: use "$runs_on_pool", not
"$jobname" to select packages & config, 2021-11-23).
In that commit I changed CC=gcc from CC=gcc-9, but on OSX the "gcc" in
$PATH points to clang, we need to use gcc-9 instead. Likewise for the
linux-gcc job CC=gcc-8 was changed to the implicit CC=gcc, which would
select GCC 9.4.0 instead of GCC 8.4.0.
Furthermore in 25715419bf (CI: don't run "make test" twice in one
job, 2021-11-23) when the "linux-TEST-vars" job was split off from
"linux-gcc" the "cc_package: gcc-8" line was copied along with
it, so its "cc_package" line wasn't working as intended either.
As a table, this is what's changed by this commit, i.e. it only
affects the linux-gcc, linux-TEST-vars and osx-gcc jobs:
|-------------------+-----------+-------------------+-------+-------|
| jobname | vector.cc | vector.cc_package | old | new |
|-------------------+-----------+-------------------+-------+-------|
| linux-clang | clang | - | clang | clang |
| linux-sha256 | clang | - | clang | clang |
| linux-gcc | gcc | gcc-8 | gcc | gcc-8 |
| osx-clang | clang | - | clang | clang |
| osx-gcc | gcc | gcc-9 | clang | gcc-9 |
| linux-gcc-default | gcc | - | gcc | gcc |
| linux-TEST-vars | gcc | gcc-8 | gcc | gcc-8 |
|-------------------+-----------+-------------------+-------+-------|
Reported-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a copy of uncompress2() implementation in compat/ so that we
can build with an older version of zlib that lack the function, and
the build procedure selects if it is used via the NO_UNCOMPRESS2
$(MAKE) variable. This is yet another "annoying" knob the porters
need to tweak on platforms that are not common enough to have the
default set in the config.mak.uname file.
Attempt to instead ask the system header <zlib.h> to decide if we
need the compatibility implementation. This is a deviation from the
way we have been handling the "compatiblity" features so far, and if
it can be done cleanly enough, it could work as a model for features
that need compatibility definition we discover in the future. With
that goal in mind, avoid expedient but ugly hacks, like shoving the
code that is conditionally compiled into an unrelated .c file, which
may not work in future cases---instead, take an approach that uses a
file that is independently compiled and stands on its own.
Compile and link compat/zlib-uncompress2.c file unconditionally, but
conditionally hide the implementation behind #if/#endif when zlib
version is 1.2.9 or newer, and unconditionally archive the resulting
object file in the libgit.a to be picked up by the linker.
There are a few things to note in the shape of the code base after
this change:
- We no longer use NO_UNCOMPRESS2 knob; if the system header
<zlib.h> claims a version that is more cent than the library
actually is, this would break, but it is easy to add it back when
we find such a system.
- The object file compat/zlib-uncompress2.o is always compiled and
archived in libgit.a, just like a few other compat/ object files
already are.
- The inclusion of <zlib.h> is done in <git-compat-util.h>; we used
to do so from <cache.h> which includes <git-compat-util.h> as the
first thing it does, so from the *.c codes, there is no practical
change.
- Until objects in libgit.a that is already used gains a reference
to the function, the reftable code will be the only one that
wants it, so libgit.a on the linker command line needs to appear
once more at the end to satisify the mutual dependency.
- Beat found a trick used by OpenSSL to avoid making the
conditionally-compiled object truly empty (apparently because
they had to deal with compilers that do not want to see an
effectively empty input file). Our compat/zlib-uncompress2.c
file borrows the same trick for portabilty.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop support for TravisCI and update test workflows at GitHub.
* ab/ci-updates:
CI: don't run "make test" twice in one job
CI: use "$runs_on_pool", not "$jobname" to select packages & config
CI: rename the "Linux32" job to lower-case "linux32"
CI: use shorter names that fit in UX tooltips
CI: remove Travis CI support
The "reftable" backend for the refs API, without integrating into
the refs subsystem, has been added.
* hn/reftable:
Add "test-tool dump-reftable" command.
reftable: add dump utility
reftable: implement stack, a mutable database of reftable files.
reftable: implement refname validation
reftable: add merged table view
reftable: add a heap-based priority queue for reftable records
reftable: reftable file level tests
reftable: read reftable files
reftable: generic interface to tables
reftable: write reftable files
reftable: a generic binary tree implementation
reftable: reading/writing blocks
Provide zlib's uncompress2 from compat/zlib-compat.c
reftable: (de)serialization for the polymorphic record type.
reftable: add blocksource, an abstraction for random access reads
reftable: utility functions
reftable: add error related functionality
reftable: add LICENSE
hash.h: provide constants for the hash IDs
Change the setup hooks for the CI to use "$runs_on_pool" for the
"$regular" job. Now we won't need as much boilerplate when adding new
jobs to the "regular" matrix, see 956d2e4639 (tests: add a test mode
for SANITIZE=leak, run it in CI, 2021-09-23) for the last such commit.
I.e. now instead of needing to enumerate each jobname when we select
packages we can install things depending on the pool we're running
in.
That we didn't do this dates back to the now gone dependency on Travis
CI, but even if we add a new CI target in the future this'll be easier
to port over, since we can probably treat "ubuntu-latest" as a
stand-in for some recent Linux that can run "apt" commands.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to the preceding commit's shortening of CI job names,
rename the only job that starts with an upper-case letter to be
consistent with the rest. It was added in 88dedd5e72 (Travis: also
test on 32-bit Linux, 2017-03-05).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for running the CI in travis. The last builds in it are
from 5 months ago[1] (as of 2021-11-19), and our documentation has
referred to GitHub CI instead since f003a91f5c (SubmittingPatches:
replace discussion of Travis with GitHub Actions, 2021-07-22).
We'll now run the "t9810 t9816" and tests on OSX. We didn't before, as
we'd carried the Travis exclusion of them forward from
522354d70f (Add Travis CI support, 2015-11-27). Let's hope whatever
issue there was with them was either Travis specific, or fixed since
then (I'm not sure).
The "apt-add-repository" invocation (which we were doing in GitHub CI)
isn't needed, it was another Travis-only case that was carried forward
into more general code. See 0f0c51181d (travis-ci: install packages
in 'ci/install-dependencies.sh', 2018-11-01).
Remove the "linux-gcc-4.8" job added in fb9d7431cf (travis-ci: build
with GCC 4.8 as well, 2019-07-18), it only ran in Travis CI.
1. https://travis-ci.org/github/git/git/builds
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be needed for reading reflog blocks in reftable.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19),
7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent
936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
2. https://lore.kernel.org/git/YS9OT%2Fpn5rRK9cGB@coredump.intra.peff.net/
3. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
4. https://lore.kernel.org/git/YS9ZIDpANfsh7N+S@coredump.intra.peff.net/
5. https://lore.kernel.org/git/20210916035603.76369-1-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some test-cases, UTF-8 locale is required. To find such locale,
we're using the first available UTF-8 locale that returned by
"locale -a".
However, the locale(1) utility is unavailable on some systems,
e.g. Linux with musl libc.
However, without "locale -a", we can't guess provided UTF-8 locale.
Add a Makefile knob GIT_TEST_UTF8_LOCALE and activate it for
linux-musl in our CI system.
Rename t/lib-git-svn.sh:prepare_a_utf8_locale to prepare_utf8_locale,
since we no longer prepare the variable named "a_utf8_locale",
but set up a fallback value for GIT_TEST_UTF8_LOCALE instead.
The fallback will be LC_ALL, LANG environment variable,
or the first UTF-8 locale from output of "locale -a", in that order.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will remove GETTEXT_POISON entirely, let's start
by removing the CI jobs that enable the option.
We cannot just remove the job because the CI is implicitly depending
on the "poison" job being a sort of "default" job in the sense that
it's the job that was otherwise run with the default compiler, no
other GIT_TEST_* options etc. So let's keep it under the name
"linux-gcc-default".
This means we can remove the initial "make test" from the "linux-gcc"
job (it does another one after setting a bunch of GIT_TEST_*
variables).
I'm not doing that because it would conflict with the in-flight
334afbc76f (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18) (currently on the "seen" branch, so
the SHA-1 will almost definitely change). It's going to use that "make
test" again for different reasons, so let's preserve it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `master` is tagged, and then both `master` and the tag are pushed,
Travis CI will happily build both. That is a waste of energy, which is
why we skip the build for `master` in that case.
Our GitHub workflow is also triggered by tags. However, the run would
fail because the `windows-test` jobs are _not_ skipped on tags, but the
`windows-build` job _is skipped (and therefore fails to upload the
build artifacts needed by the test jobs).
In addition, we just added logic to our GitHub workflow that will skip
runs altogether if there is already a successful run for the same commit
or at least for the same tree.
Let's just change the GitHub workflow to no longer specifically skip
tagged revisions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since e4597aae65 (run test suite without dashed git-commands in PATH,
2009-12-02), we stopped running our tests with `git-foo` binaries found
at the top-level directory of a freshly built source tree; instead we
have placed only `git` and selected `git-foo` commands that must be on
`$PATH` in `bin-wrappers/` and prepended that `bin-wrappers/` to the
`PATH` used in the test suite. We did that to catch the tests and
scripted Git commands that still try to use the dashed form.
Since CI jobs will not install the built Git to anywhere, and the
hardlinks we make at the top-level of the source tree for `git-add` and
friends are not even used during tests, they are pure waste of resources
these days.
Thanks to the newly invented `SKIP_DASHED_BUILT_INS` knob, we can now
skip creating these links in the source tree. So let's do that.
Note that this change introduces a subtle change of behavior: when Git's
`cmd_main()` calls `setup_path()`, it inserts the value of
`GIT_EXEC_PATH` (defaulting to `<prefix>/libexec/git-core`) at the
beginning of the environment variable `PATH`. This is necessary to find
e.g. scripted commands that are installed in that location. For the
purposes of Git's test suite, the `bin-wrappers/` scripts override
`GIT_EXEC_PATH` to point to the top-level directory of the source code.
In other words, if a scripted command had used a dashed invocation of a
built-in Git command, it would not have been caught previously, which is
fixed by this change.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our test suite, when 'git p4' invokes a Git command as a
subprocesses, then it should run the 'git' binary we are testing.
Unfortunately, this is not the case in the 'linux-clang' and
'linux-gcc' jobs on Travis CI, where 'git p4' runs the system
'/usr/bin/git' instead.
Travis CI's default Linux image includes 'pyenv', and all Python
invocations that involve PATH lookup go through 'pyenv', e.g. our
'PYTHON_PATH=$(which python3)' sets '/opt/pyenv/shims/python3' as
PYTHON_PATH, which in turn will invoke '/usr/bin/python3'. Alas, the
'pyenv' version included in this image is buggy, and prepends the
directory containing the Python binary to PATH even if that is a
system directory already in PATH near the end. Consequently, 'git p4'
in those jobs ends up with its PATH starting with '/usr/bin', and then
runs '/usr/bin/git'.
So use the absolute paths '/usr/bin/python{2,3}' explicitly when
setting PYTHON_PATH in those Linux jobs to avoid the PATH lookup and
thus the bogus 'pyenv' from interfering with our 'git p4' tests.
Don't bother with special-casing Travis CI: while this issue doesn't
affect the corresponding Linux jobs on GitHub Actions, both CI systems
use Ubuntu LTS-based images, so we can safely rely on these Python
paths.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 676eb0c1ce0d380478eb16bdc5a3f2a7bc01c1d2;
as we will be reverting the change to show these extra output
tokens under bash, the pattern would not match anything.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, test failures will be annotated with a helpful,
clickable message in GitHub Actions. For details, see
https://github.com/actions/toolkit/blob/master/docs/problem-matchers.md
Note: we need to set `TEST_SHELL_PATH` to Bash so that the problem
matcher is fed a file and line number for each test failure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6cdccfce1e (i18n: make GETTEXT_POISON a runtime option,
2018-11-08), the `jobname` was adjusted to have the `GIT_TEST_` prefix,
but that prefix makes no sense in this context.
Co-authored-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
