In 554544276a (*.[ch]: remove extern from function declarations using
spatch, 2019-04-29), we removed externs from function declarations using
spatch but we intentionally excluded files under compat/ since some are
directly copied from an upstream and we should avoid churning them so
that manually merging future updates will be simpler.
In the last commit, we determined the files which taken from an upstream
so we can exclude them and run spatch on the remainder.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files compat/\*\*.{c,h} |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
$ git checkout -- \
compat/regex/ \
compat/inet_ntop.c \
compat/inet_pton.c \
compat/nedmalloc/ \
compat/obstack.{c,h} \
compat/poll/
Coccinelle has some trouble dealing with `__attribute__` and varargs so
we ran the following to ensure that no remaining changes were left
behind:
$ git ls-files compat/\*\*.{c,h} |
xargs sed -i'' -e 's/^\(\s*\)extern \([^(]*([^*]\)/\1\2/'
$ git checkout -- \
compat/regex/ \
compat/inet_ntop.c \
compat/inet_pton.c \
compat/nedmalloc/ \
compat/obstack.{c,h} \
compat/poll/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running Coccinelle on all sources inside compat/ that were created
by us[1], it was found that compat/mingw.c violated an array.cocci rule
in two places and, thus, a patch was generated. Apply this patch so that
all compat/ sources created by us follows all cocci rules.
[1]: Do not run Coccinelle on files that are taken from some upstream
because in case we need to pull updates from them, we would like to have
diverged as little as possible in order to make merging updates simpler.
The following sources were determined to have been taken from some
upstream:
* compat/regex/
* compat/inet_ntop.c
* compat/inet_pton.c
* compat/nedmalloc/
* compat/obstack.{c,h}
* compat/poll/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If Git were installed in a path containing non-ASCII characters,
commands such as `git am` and `git submodule`, which are implemented as
externals, would fail to launch with the following error:
> fatal: 'am' appears to be a git command, but we were not
> able to execute it. Maybe git-am is broken?
This was due to lookup_prog not being Unicode-aware. It was somehow
missed in 85faec9d3a (Win32: Unicode file name support (except dirent),
2012-03-15).
Note that the only problem in this function was calling
`GetFileAttributes()` instead of `GetFileAttributesW()`. The calls to
`access()` were fine because `access()` is a macro which resolves to
`mingw_access()`, which already handles Unicode correctly. But
`lookup_prog()` was changed to use `_waccess()` directly so that we only
convert the path to UTF-16 once.
To make things work correctly, we have to maintain UTF-8 and UTF-16
versions in tandem in `lookup_prog()`.
Signed-off-by: Adam Roben <adam@roben.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compilation fix.
* rs/nedalloc-fixlets:
nedmalloc: avoid compiler warning about unused value
nedmalloc: do assignments only after the declaration section
Cast the evaluated value of the macro INITIAL_LOCK to void to instruct
the compiler that we're not interested in said value nor the following
warning:
In file included from compat/nedmalloc/nedmalloc.c:63:
compat/nedmalloc/malloc.c.h: In function ‘init_user_mstate’:
compat/nedmalloc/malloc.c.h:1706:62: error: right-hand operand of comma expression has no effect [-Werror=unused-value]
1706 | #define INITIAL_LOCK(sl) (memset(sl, 0, sizeof(MLOCK_T)), 0)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
compat/nedmalloc/malloc.c.h:5020:3: note: in expansion of macro ‘INITIAL_LOCK’
5020 | INITIAL_LOCK(&m->mutex);
| ^~~~~~~~~~~~
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid the following compiler warning:
In file included from compat/nedmalloc/nedmalloc.c:63:
compat/nedmalloc/malloc.c.h: In function ‘pthread_release_lock’:
compat/nedmalloc/malloc.c.h:1759:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
1759 | volatile unsigned int* lp = &sl->l;
| ^~~~~~~~
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
The entire idea of generating the VS solution makes only sense if we
generate it via Continuous Integration; otherwise potential users would
still have to download the entire Git for Windows SDK.
If we pre-generate the Visual Studio solution, Git can be built entirely
within Visual Studio, and the test scripts can be run in a regular Git
for Windows (e.g. the Portable Git flavor, which does not include a full
GCC toolchain and therefore weighs only about a tenth of Git for
Windows' SDK).
So let's just add a target in the Makefile that can be used to generate
said solution; The generated files will then be committed so that they
can be pushed to a branch ready to check out by Visual Studio users.
To make things even more useful, we also generate and commit other files
that are required to run the test suite, such as templates and
bin-wrappers: with this, developers can run the test suite in a regular
Git Bash after building the solution in Visual Studio.
Note: for this build target, we do not actually need to initialize the
`vcpkg` system, so we don't.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some older Windows versions (e.g. Windows 7), the CreateProcessW()
function does not really support spaces in its first argument,
lpApplicationName. But it supports passing NULL as lpApplicationName,
which makes it figure out the application from the (possibly quoted)
first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
We will abuse the test-fake-ssh.exe helper to verify that this works and
does not regress.
This fixes https://github.com/git-for-windows/git/issues/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows update.
* js/mingw-use-utf8:
mingw: fix possible buffer overrun when calling `GetUserNameW()`
mingw: use Unicode functions explicitly
mingw: get pw_name in UTF-8 format
Support to build with MSVC has been updated.
* jh/msvc:
msvc: ignore .dll and incremental compile output
msvc: avoid debug assertion windows in Debug Mode
msvc: do not pretend to support all signals
msvc: add pragmas for common warnings
msvc: add a compile-time flag to allow detailed heap debugging
msvc: support building Git using MS Visual C++
msvc: update Makefile to allow for spaces in the compiler path
msvc: fix detect_msys_tty()
msvc: define ftello()
msvc: do not re-declare the timespec struct
msvc: mark a variable as non-const
msvc: define O_ACCMODE
msvc: include sigset_t definition
msvc: fix dependencies of compat/msvc.c
mingw: replace mingw_startup() hack
obstack: fix compiler warning
cache-tree/blame: avoid reusing the DEBUG constant
t0001 (mingw): do not expect a specific order of stdout/stderr
Mark .bat files as requiring CR/LF endings
mingw: fix a typo in the msysGit-specific section
HOME initialization was historically duplicated in many different places,
including /etc/profile, launch scripts such as git-bash.vbs and gitk.cmd,
and (although slightly broken) in the git-wrapper.
Even unrelated projects such as GitExtensions and TortoiseGit need to
implement the same logic to be able to call git directly.
Initialize HOME in git's own startup code so that we can eventually retire
all the duplicate initialization code.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 39a98e9b68 (mingw: get pw_name in UTF-8 format, 2019-06-27), this
developer missed the fact that the `GetUserNameW()` function takes the
number of characters as `len` parameter, not the number of bytes.
Reported-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many Win32 API functions actually exist in two variants: one with
the `A` suffix that takes ANSI parameters (`char *` or `const char *`)
and one with the `W` suffix that takes Unicode parameters (`wchar_t *`
or `const wchar_t *`).
The ANSI variant assumes that the strings are encoded according to
whatever is the current locale. This is not what Git wants to use on
Windows: we assume that `char *` variables point to strings encoded in
UTF-8.
There is a pseudo UTF-8 locale on Windows, but it does not work
as one might expect. In addition, if we overrode the user's locale, that
would modify the behavior of programs spawned by Git (such as editors,
difftools, etc), therefore we cannot use that pseudo locale.
Further, it is actually highly encouraged to use the Unicode versions
instead of the ANSI versions, so let's do precisely that.
Note: when calling the Win32 API functions _without_ any suffix, it
depends whether the `UNICODE` constant is defined before the relevant
headers are #include'd. Without that constant, the ANSI variants are
used. Let's be explicit and avoid that ambiguity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we would have obtained the user name encoded in whatever the
current code page is.
Note: the "user name" here does not denote the full name but instead the
short logon name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows >= Vista, not having an application manifest with a
requestedExecutionLevel can cause several kinds of confusing behavior.
The first and more obvious behavior is "Installer Detection" of the
"User Account Control" (also known as "UAC") feature, where Windows
sometimes decides (by looking at things like the file name and even
sequences of bytes within the executable) that an executable is an
installer and should run elevated (causing the well-known popup dialog
to appear). In Git's context, subcommands such as "git patch-id" or "git
update-index" fall prey to this behavior.
The second and more confusing behavior is "File Virtualization". It
means that when files are written without having write permission, it
does not fail (as expected), but they are instead redirected to
somewhere else. When the files are read, the original contents are
returned, though, not the ones that were just written somewhere else.
Even more confusing, not all write accesses are redirected; Trying to
write to write-protected .exe files, for example, will fail instead of
redirecting.
In addition to being unwanted behavior, File Virtualization causes
dramatic slowdowns in Git (see for instance
http://code.google.com/p/msysgit/issues/detail?id=320).
A third unwanted behavior of Windows >= Vista is that it lies about the
Windows version when calling `GetWindowsVersionEx()`.
There are two ways to prevent these unwanted behaviors: Either you embed
an application manifest (which really is an XML document conforming to a
specific schema) within all your executables, or you add an external
manifest (a file with the same name followed by `.manifest`) to all your
executables. Since Git's builtins are hardlinked (or copied), it is
simpler and more robust to embed a manifest.
Recent enough MSVC compilers already embed a working internal manifest,
and building with mingw-w64 (which is the case in Git for Windows' SDK)
does it, too, but for MinGW you have to do so by hand.
In any case, it is better to be explicit about this manifest, that way
changes in the compiler toolchain won't surprise us (as mingw-w64 once
did when it broke `GetWindowsVersionEx()` by mistake).
References:
- New UAC Technologies for Windows Vista
http://msdn.microsoft.com/en-us/library/bb756960.aspx
- Create and Embed an Application Manifest (UAC)
http://msdn.microsoft.com/en-us/library/bb756929.aspx
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For regular debugging, it is pretty helpful when a debug assertion in a
running application triggers a window that offers to start the debugger.
However, when running the test suite, it is not so helpful, in
particular when the debug assertions are then suppressed anyway because
we disable the invalid parameter checking (via invalidcontinue.obj, see
the comment in config.mak.uname about that object for more information).
So let's simply disable that window in Debug Mode (it is already
disabled in Release Mode).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This special-cases various signals that are not supported on Windows,
such as SIGPIPE. These cause the UCRT to throw asserts (at least in
debug mode).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC can be overzealous about some warnings. Disable them.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MS Visual C comes with a few neat features we can use to analyze the
heap consumption (i.e. leaks, max memory, etc).
With this patch, we introduce support via the build-time flag
`USE_MSVC_CRTDBG`.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, Git can be built using the Microsoft toolchain, via:
make MSVC=1 [DEBUG=1]
Third party libraries are built from source using the open source
"vcpkg" tool set. See https://github.com/Microsoft/vcpkg
On a first build, the vcpkg tools and the third party libraries are
automatically downloaded and built. DLLs for the third party libraries
are copied to the top-level (and t/helper) directory to facilitate
debugging. See compat/vcbuild/README.
A series of .bat files are invoked by the Makefile to find the location
of the installed version of Visual Studio and the associated compiler
tools (essentially replicating the environment setup performed by a
"Developer Command Prompt"). This should find the most recent VS2015 or
VS2017 installation. Output from these scripts are used by the Makefile
to define compiler and linker pathnames and -I and -L arguments.
The build produces .pdb files for both debug and release builds.
Note: This commit was squashed from an organic series of commits
developed between 2016 and 2018 in Git for Windows' `master` branch.
This combined commit eliminates the obsolete commits related to fetching
NuGet packages for third party libraries. It is difficult to use NuGet
packages for C/C++ sources because they may be built by earlier versions
of the MSVC compiler and have CRT version and linking issues.
Additionally, the C/C++ NuGet packages that we were using tended to not
be updated concurrently with the sources. And in the case of cURL and
OpenSSL, this could expose us to security issues.
Helped-by: Yue Lin Ho <b8732003@student.nsysu.edu.tw>
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ntstatus.h header is only available in MINGW.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is just called differently in MSVC's headers.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
VS2015's headers already declare that struct.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
VS2015 complains when using a const pointer in memcpy()/free().
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This constant is not defined in MSVC's headers.
In UCRT's fcntl.h, _O_RDONLY, _O_WRONLY and _O_RDWR are defined as 0, 1
and 2, respectively. Yes, that means that UCRT breaks with the tradition
that O_RDWR == O_RDONLY | O_WRONLY.
It is a perfectly legal way to define those constants, though, therefore
we need to take care of defining O_ACCMODE accordingly.
This is particularly important in order to keep our "open() can set
errno to EISDIR" emulation working: it tests that (flags & O_ACCMODE) is
not identical to O_RDONLY before going on to test specifically whether
the file for which open() reported EACCES is, in fact, a directory.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On MSVC (VS2008) sigset_t is not defined.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows has special code to retrieve the command-line parameters
(and even the environment) in UTF-16 encoding, so that they can be
converted to UTF-8. This is necessary because Git for Windows wants to
use UTF-8 encoded strings throughout its code, and the main() function
does not get the parameters in that encoding.
To do that, we used the __wgetmainargs() function, which is not even a
Win32 API function, but provided by the MINGW "runtime" instead.
Obviously, this method would not work with any compiler other than GCC,
and in preparation for compiling with Visual C++, we would like to avoid
precisely that.
Lucky us, there is a much more elegant way: we can simply implement the
UTF-16 variant of `main()`: `wmain()`.
To make that work, we need to link with -municode. The command-line
parameters are passed to `wmain()` encoded in UTF-16, as desired, and
this method also works with GCC, and also with Visual C++ after
adjusting the MSVC linker flags to force it to use `wmain()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MS Visual C suggests that the construct
condition ? (int) i : (ptrdiff_t) d
is incorrect. Let's fix this by casting to ptrdiff_t also for the
positive arm of the conditional.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
This also side-steps a compiler warning when building with GCC v8.x: it
would complain about casting between incompatible function pointers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return type of the `GetProcAddress()` function is `FARPROC` which
evaluates to `long long int (*)()`, i.e. it cannot be cast to the
correct function signature by GCC 8.
To work around that, we first cast to `void *` and go on with our merry
lives.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Workaround for standard-compliant but less-than-useful behaviour of
access(2) for the root user.
* cc/access-on-aix-workaround:
git-compat-util: work around for access(X_OK) under root
To support IPv6, Git provided fall back functions for Windows versions
that did not support IPv6. However, as Git dropped support for Windows
XP and prior, those functions are not needed anymore.
Remove those fallbacks by reverting fe3b2b7b82 (Enable support for
IPv6 on MinGW, 2009-11-24) and using the functions directly (without
'ipv6_' prefix).
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On AIX, access(X_OK) may succeed when run as root even if the
execution isn't possible. This behavior is allowed by POSIX
which says:
... for a process with appropriate privileges, an implementation
may indicate success for X_OK even if execute permission is not
granted to any user.
It can lead hook programs to have their execution refused:
git commit -m content
fatal: cannot exec '.git/hooks/pre-commit': Permission denied
Add NEED_ACCESS_ROOT_HANDLER in order to use an access helper function.
It checks with stat if any executable flags is set when the current user
is root.
Signed-off-by: Clément Chigot <clement.chigot@atos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Windows version of git to report peak memory usage
during exit() processing.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create trace2_initialize_clock() and call from main() to capture
process start time in isolation and before other sub-systems are
ready.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The include file compat/bswap.h has been updated so that it is safe
to (accidentally) include it more than once.
* jk/guard-bswap-header:
compat/bswap: add include header guards
Our compat/bswap.h lacks the usual preprocessor guards against multiple
inclusion. This usually isn't an issue since it only gets included from
git-compat-util.h, which has its own guards. But it would produce
redeclaration errors if any file included it separately.
Our hdr-check target would complain about this, except that it currently
skips items in compat/ entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add platform-specific interface to log information about the current
process.
On Windows, this interface is used to indicate whether the git process
is running under a debugger and list names of the process ancestors.
Information for other platforms is left for a future effort.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running up to v2.21.0, we fixed two bugs that were made prominent by the
Windows-specific change to retain copies of only the 30 latest getenv()
calls' returned strings, invalidating any copies of previous getenv()
calls' return values.
While this really shines a light onto bugs of the form where we hold
onto getenv()'s return values without copying them, it is also a real
problem for users.
And even if Jeff King's patches merged via 773e408881 (Merge branch
'jk/save-getenv-result', 2019-01-29) provide further work on that front,
we are far from done. Just one example: on Windows, we unset environment
variables when spawning new processes, which potentially invalidates
strings that were previously obtained via getenv(), and therefore we
have to duplicate environment values that are somehow involved in
spawning new processes (e.g. GIT_MAN_VIEWER in show_man_page()).
We do not have a chance to investigate, let address, all of those issues
in time for v2.21.0, so let's at least help Windows users by increasing
the number of getenv() calls' return values that are kept valid. The
number 64 was determined by looking at the average number of getenv()
calls per process in the entire test suite run on Windows (which is
around 40) and then adding a bit for good measure. And it is a power of
two (which would have hit yesterday's theme perfectly).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `git version --build-options`, we report also the CPU, but in Git for
Windows we actually cross-compile the 32-bit version in a 64-bit Git for
Windows, so we cannot rely on the auto-detected value.
In 3815f64b0d (mingw: fix CPU reporting in `git version
--build-options`, 2019-02-07), we fixed this by a Windows-only
workaround, making use of magic pre-processor constants, which works in
GCC, but most likely not all C compilers.
As pointed out by Eric Sunshine, there is a better way, anyway: to set
the Makefile variable HOST_CPU explicitly for cross-compiled Git. So
let's do that!
This reverts commit 3815f64b0d partially.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On various BSD's, fileno(fp) is implemented as a macro that directly
accesses the fields in the FILE * object, which breaks a function that
accepts a "void *fp" parameter and calls fileno(fp) and expect it to
work.
Work it around by adding a compile-time knob FILENO_IS_A_MACRO that
inserts a real helper function in the middle of the callchain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot rely on `uname -m` in Git for Windows' SDK to tell us what
architecture we are compiling for, as we can compile both 32-bit and
64-bit `git.exe` from a 64-bit SDK, but the `uname -m` in that SDK will
always report `x86_64`.
So let's go back to our original design. And make it explicitly
Windows-specific.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
A new encoding UTF-16LE-BOM has been invented to force encoding to
UTF-16 with BOM in little endian byte order, which cannot be directly
generated by using iconv.
* tb/utf-16-le-with-explicit-bom:
Support working-tree-encoding "UTF-16LE-BOM"
In Git for Windows, "git clone \\server\share\path" etc. that uses
UNC paths from command line had bad interaction with its shell
emulation.
* js/mingw-unc-path-w-backslashes:
mingw: special-case arguments to `sh`
mingw (t5580): document bug when cloning from backslashed UNC paths
The compat/obstack code had casts that -Wcast-function-type
compilation option found questionable.
* sg/obstack-cast-function-type-fix:
compat/obstack: fix -Wcast-function-type warnings
Users who want UTF-16 files in the working tree set the .gitattributes
like this:
test.txt working-tree-encoding=UTF-16
The unicode standard itself defines 3 allowed ways how to encode UTF-16.
The following 3 versions convert all back to 'g' 'i' 't' in UTF-8:
a) UTF-16, without BOM, big endian:
$ printf "\000g\000i\000t" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
b) UTF-16, with BOM, little endian:
$ printf "\377\376g\000i\000t\000" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
c) UTF-16, with BOM, big endian:
$ printf "\376\377\000g\000i\000t" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
Git uses libiconv to convert from UTF-8 in the index into ITF-16 in the
working tree.
After a checkout, the resulting file has a BOM and is encoded in "UTF-16",
in the version (c) above.
This is what iconv generates, more details follow below.
iconv (and libiconv) can generate UTF-16, UTF-16LE or UTF-16BE:
d) UTF-16
$ printf 'git' | iconv -f UTF-8 -t UTF-16 | od -c
0000000 376 377 \0 g \0 i \0 t
e) UTF-16LE
$ printf 'git' | iconv -f UTF-8 -t UTF-16LE | od -c
0000000 g \0 i \0 t \0
f) UTF-16BE
$ printf 'git' | iconv -f UTF-8 -t UTF-16BE | od -c
0000000 \0 g \0 i \0 t
There is no way to generate version (b) from above in a Git working tree,
but that is what some applications need.
(All fully unicode aware applications should be able to read all 3 variants,
but in practise we are not there yet).
When producing UTF-16 as an output, iconv generates the big endian version
with a BOM. (big endian is probably chosen for historical reasons).
iconv can produce UTF-16 files with little endianess by using "UTF-16LE"
as encoding, and that file does not have a BOM.
Not all users (especially under Windows) are happy with this.
Some tools are not fully unicode aware and can only handle version (b).
Today there is no way to produce version (b) with iconv (or libiconv).
Looking into the history of iconv, it seems as if version (c) will
be used in all future iconv versions (for compatibility reasons).
Solve this dilemma and introduce a Git-specific "UTF-16LE-BOM".
libiconv can not handle the encoding, so Git pick it up, handles the BOM
and uses libiconv to convert the rest of the stream.
(UTF-16BE-BOM is added for consistency)
Rported-by: Adrián Gimeno Balaguer <adrigibal@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while, the Azure Pipeline fails with some semi-random
error: timer thread did not terminate timely
This error message means that the thread that is used to emulate the
setitimer() function did not terminate within 1,000 milliseconds.
The most likely explanation (and therefore the one we should assume to
be true, according to Occam's Razor) is that the timeout of one second
is simply not enough because we try to run so many tasks in parallel.
So let's give it ten seconds instead of only one. That should be enough.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portability updates for the HPE NonStop platform.
* rb/hpe:
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
git-compat-util.h: add FLOSS headers for HPE NonStop
config.mak.uname: support for modern HPE NonStop config.
transport-helper: drop read/write errno checks
transport-helper: use xread instead of read
The MSYS2 runtime does its best to emulate the command-line wildcard
expansion and de-quoting which would be performed by the calling Unix
shell on Unix systems.
Those Unix shell quoting rules differ from the quoting rules applying to
Windows' cmd and Powershell, making it a little awkward to quote
command-line parameters properly when spawning other processes.
In particular, git.exe passes arguments to subprocesses that are *not*
intended to be interpreted as wildcards, and if they contain
backslashes, those are not to be interpreted as escape characters, e.g.
when passing Windows paths.
Note: this is only a problem when calling MSYS2 executables, not when
calling MINGW executables such as git.exe. However, we do call MSYS2
executables frequently, most notably when setting the use_shell flag in
the child_process structure.
There is no elegant way to determine whether the .exe file to be
executed is an MSYS2 program or a MINGW one. But since the use case of
passing a command line through the shell is so prevalent, we need to
work around this issue at least when executing sh.exe.
Let's introduce an ugly, hard-coded test whether argv[0] is "sh", and
whether it refers to the MSYS2 Bash, to determine whether we need to
quote the arguments differently than usual.
That still does not fix the issue completely, but at least it is
something.
Incidentally, this also fixes the problem where `git clone \\server\repo`
failed due to incorrect handling of the backslashes when handing the path
to the git-upload-pack process.
Further, we need to take care to quote not only whitespace and
backslashes, but also curly brackets. As aliases frequently go through
the MSYS2 Bash, and as aliases frequently get parameters such as
HEAD@{yesterday}, this is really important. As an early version of this
patch broke this, let's make sure that this does not regress by adding a
test case for that.
Helped-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GCC 8 introduced the new -Wcast-function-type warning, which is
implied by -Wextra (which, in turn is enabled in our DEVELOPER flags).
When building Git with GCC 8 and this warning enabled on a non-glibc
platform [1], one is greeted with a screenful of compiler
warnings/errors:
compat/obstack.c: In function '_obstack_begin':
compat/obstack.c:162:17: error: cast between incompatible function types from 'void * (*)(long int)' to 'struct _obstack_chunk * (*)(void *, long int)' [-Werror=cast-function-type]
h->chunkfun = (struct _obstack_chunk * (*)(void *, long)) chunkfun;
^
compat/obstack.c:163:16: error: cast between incompatible function types from 'void (*)(void *)' to 'void (*)(void *, struct _obstack_chunk *)' [-Werror=cast-function-type]
h->freefun = (void (*) (void *, struct _obstack_chunk *)) freefun;
^
compat/obstack.c:116:8: error: cast between incompatible function types from 'struct _obstack_chunk * (*)(void *, long int)' to 'struct _obstack_chunk * (*)(long int)' [-Werror=cast-function-type]
: (*(struct _obstack_chunk *(*) (long)) (h)->chunkfun) ((size)))
^
compat/obstack.c:168:22: note: in expansion of macro 'CALL_CHUNKFUN'
chunk = h->chunk = CALL_CHUNKFUN (h, h -> chunk_size);
^~~~~~~~~~~~~
<snip>
'struct obstack' stores pointers to two functions to allocate and free
"chunks", and depending on how obstack is used, these functions take
either one parameter (like standard malloc() and free() do; this is
how we use it in 'kwset.c') or two parameters. Presumably to reduce
memory footprint, a single field is used to store the function pointer
for both signatures, and then it's casted to the appropriate signature
when the function pointer is accessed. These casts between function
pointers with different number of parameters are what trigger those
compiler errors.
Modify 'struct obstack' to use unions to store function pointers with
different signatures, and then use the union member with the
appropriate signature when accessing these function pointers. This
eliminates the need for those casts, and thus avoids this compiler
error.
[1] Compiling 'compat/obstack.c' on a platform with glibc is sort of
a noop, see the comment before '# define ELIDE_CODE', so this is
not an issue on common Linux distros.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The system definition header files on HPE NonStop do not define
intptr_t and uintptr_t as do other platforms. These typedefs
are added specifically wrapped in a __TANDEM ifdef.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression for cygwin users was introduced with commit 05b458c,
"real_path: resolve symlinks by hand".
In the the commit message we read:
The current implementation of real_path uses chdir() in order to resolve
symlinks. Unfortunately this isn't thread-safe as chdir() affects a
process as a whole...
The old (and non-thread-save) OS calls chdir()/pwd() had been
replaced by a string operation.
The cygwin layer "knows" that "C:\cygwin" is an absolute path,
but the new string operation does not.
"git clone <url> C:\cygwin\home\USER\repo" fails like this:
fatal: Invalid path '/home/USER/repo/C:\cygwin\home\USER\repo'
The solution is to implement has_dos_drive_prefix(), skip_dos_drive_prefix()
is_dir_sep(), offset_1st_component() and convert_slashes() for cygwin
in the same way as it is done in 'Git for Windows' in compat/mingw.[ch]
Extract the needed code into compat/win32/path-utils.[ch] and use it
for cygwin as well.
Reported-by: Steven Penny <svnpenn@gmail.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further fix for O_APPEND emulation on Windows
* js/mingw-o-append:
mingw: fix mingw_open_append to work with named pipes
t0051: test GIT_TRACE to a windows named pipe
This also removes an implicit conversion from size_t (unsigned) to int (signed).
_stricmp as well as _strnicmp are both available since VS2012.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The MSDN documentation has been superseded by Microsoft Docs (which is
backed by a repository on GitHub containing many, many files in Markdown
format).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Win32 CONDITION_VARIABLE has better performance and is easier to
maintain, as the code is a lot shorter now (the semantics of the
CONDITION_VARIABLE matches the pthread_cond_t very well).
Note: CONDITION_VARIABLE is not available in Windows XP and below,
but the declared minimal Windows version required to build and run
Git for Windows is Windows Vista (which is also beyond its
end-of-life, but for less long than Windows XP), so that's okay.
Signed-off-by: Loo Rong Jie <loorongjie@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `CreateHardLink()` is available in all supported Windows
versions (even since Windows XP), so there is no more need to resolve it
at runtime.
Helped-by: Max Kirillov <max@max630.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows port learned to use nano-second resolution file timestamps.
* js/mingw-ns-filetime:
mingw: implement nanosecond-precision file times
mingw: replace MSVCRT's fstat() with a Win32-based implementation
mingw: factor out code to set stat() data
The value of timeout starts as an int value, and for this reason it
cannot overflow unsigned long long aka ULONGLONG. The unsigned version
of this initial value is available in orig_timeout. The difference
(orig_timeout - elapsed) cannot wrap around because it is protected by
a conditional (as can be seen in the patch text). Hence, the ULONGLONG
difference can only have values that are smaller than the initial
timeout value and truncation to int cannot overflow.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
[j6t: improved both implementation and log message]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a9b8a09c3c (mingw: replace isatty() hack, 2016-12-22), we handle
isatty() by special-casing the stdin/stdout/stderr file descriptors,
caching the return value. However, we missed the case where dup2()
overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Git for Windows project, we have ample precendent for config
settings that apply to Windows, and to Windows only.
Let's formalize this concept by introducing a platform_core_config()
function that can be #define'd in a platform-specific manner.
This will allow us to contain platform-specific code better, as the
corresponding variables no longer need to be exported so that they can
be defined in environment.c and be set in config.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the authoritative environment is encoded in UTF-16. In Git
for Windows, we convert that to UTF-8 (because UTF-16 is *such* a
foreign idea to Git that its source code is unprepared for it).
Previously, out of performance concerns, we converted the entire
environment to UTF-8 in one fell swoop at the beginning, and upon
putenv() and run_command() converted it back.
Having a private copy of the environment comes with its own perils: when
a library used by Git's source code tries to modify the environment, it
does not really work (in Git for Windows' case, libcurl, see
https://github.com/git-for-windows/git/compare/bcad1e6d58^...bcad1e6d58^2
for a glimpse of the issues).
Hence, it makes our environment handling substantially more robust if we
switch to on-the-fly-conversion in `getenv()`/`putenv()` calls. Based
on an initial version in the MSVC context by Jeff Hostetler, this patch
makes it so.
Surprisingly, this has a *positive* effect on speed: at the time when
the current code was written, we tested the performance, and there were
*so many* `getenv()` calls that it seemed better to convert everything
in one go. In the meantime, though, Git has obviously been cleaned up a
bit with regards to `getenv()` calls so that the Git processes spawned
by the test suite use an average of only 40 `getenv()`/`putenv()` calls
over the process lifetime.
Speaking of the entire test suite: the total time spent in the
re-encoding in the current code takes about 32.4 seconds (out of 113
minutes runtime), whereas the code introduced in this patch takes only
about 8.2 seconds in total. Not much, but it proves that we need not be
concerned about the performance impact introduced by this patch.
Helped-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the Windows port figures out the current directory has been
improved.
* js/mingw-getcwd:
mingw: fix getcwd when the parent directory cannot be queried
mingw: ensure `getcwd()` reports the correct case
The logic to select the default user name and e-mail on Windows has
been improved.
* js/mingw-default-ident:
mingw: use domain information for default email
getpwuid(mingw): provide a better default for the user name
getpwuid(mingw): initialize the structure only once
in f48000fc ("Yank writing-back support from gitfakemmap.", 2005-10-08)
support for writting back changes was removed but the specific prot
flag that would be used was not checked for
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`GetLongPathName()` function may fail when it is unable to query
the parent directory of a path component to determine the long name
for that component. It happens, because it uses `FindFirstFile()`
function for each next short part of path. The `FindFirstFile()`
requires `List Directory` and `Synchronize` desired access for a calling
process.
In case of lacking such permission for some part of path,
the `GetLongPathName()` returns 0 as result and `GetLastError()`
returns ERROR_ACCESS_DENIED.
`GetFinalPathNameByHandle()` function can help in such cases, because
it requires `Read Attributes` and `Synchronize` desired access to the
target path only.
The `GetFinalPathNameByHandle()` function was introduced on
`Windows Server 2008/Windows Vista`. So we need to load it dynamically.
`CreateFile()` parameters:
`lpFileName` = path to the current directory
`dwDesiredAccess` = 0 (it means `Read Attributes` and `Synchronize`)
`dwShareMode` = FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE
(it prevents `Sharing Violation`)
`lpSecurityAttributes` = NULL (default security attributes)
`dwCreationDisposition` = OPEN_EXISTING
(required to obtain a directory handle)
`dwFlagsAndAttributes` = FILE_FLAG_BACKUP_SEMANTICS
(required to obtain a directory handle)
`hTemplateFile` = NULL (when opening an existing file or directory,
`CreateFile` ignores this parameter)
The string that is returned by `GetFinalPathNameByHandle()` function
uses the \\?\ syntax. To skip the prefix and convert backslashes
to slashes, the `normalize_ntpath()` mingw function will be used.
Note: `GetFinalPathNameByHandle()` function returns a final path.
It is the path that is returned when a path is fully resolved.
For example, for a symbolic link named "C:\tmp\mydir" that points to
"D:\yourdir", the final path would be "D:\yourdir".
Signed-off-by: Anton Serbulov <aserbulov@plesk.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching the current working directory, say, in PowerShell, it is
quite possible to use a different capitalization than the one that is
recorded on disk. While doing the same in `cmd.exe` adjusts the
capitalization magically, that does not happen in PowerShell so that
`getcwd()` returns the current directory in a different way than is
recorded on disk.
Typically this creates no problems except when you call
git log .
in a subdirectory called, say, "GIT/" but you switched to "Git/" and
your `getcwd()` reports the latter, then Git won't understand that you
wanted to see the history as per the `GIT/` subdirectory but it thinks you
wanted to see the history of some directory that may have existed in the
past (but actually never did).
So let's be extra careful to adjust the capitalization of the current
directory before working with it.
Reported by a few PowerShell power users ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we access IPv6-related functions, we load the corresponding system
library using the `LoadLibrary()` function, which is not the recommended
way to load system libraries.
In practice, it does not make a difference: the `ws2_32.dll` library
containing the IPv6 functions is already loaded into memory, so
LoadLibrary() simply reuses the already-loaded library.
Still, recommended way is recommended way, so let's use that instead.
While at it, also adjust the code in contrib/ that loads system libraries.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer use any of MSVCRT's stat-functions, so there's no need to
stick to a CRT-compatible 'struct stat' either.
Define and use our own POSIX-2013-compatible 'struct stat' with nanosecond-
precision file times.
Note: This can cause performance issues when using Git variants with
different file time resolutions, as the timestamps are stored in the Git
index: after updating the index with a Git variant that uses
second-precision file times, a nanosecond-aware Git will think that
pretty much every single file listed in the index is out of date.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fstat() is the only stat-related CRT function for which we don't have a
full replacement yet (and thus the only reason to stick with MSVCRT's
'struct stat' definition).
Fully implement fstat(), in preparation of implementing a POSIX 2013
compatible 'struct stat' with nanosecond-precision file times.
This allows us also to implement some clever code to handle pipes and
character devices in our own way.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our fstat() emulation, we convert the file metadata from Win32 data
structures to an emulated POSIX structure.
To structure the code better, let's factor that part out into its own
function.
Note: it would be tempting to try to unify this code with the part of
do_lstat() that does the same thing, but they operate on different data
structures: BY_HANDLE_FILE_INFORMATION vs WIN32_FILE_ATTRIBUTE_DATA. So
unfortunately, they cannot be unified.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user is registered in a Windows domain, it is really easy to
obtain the email address. So let's do that.
Suggested by Lutz Roeder.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do have the excellent GetUserInfoEx() function to obtain more
detailed information of the current user (if the user is part of a
Windows domain); Let's use it.
Suggested by Lutz Roeder.
To avoid the cost of loading Secur32.dll (even lazily, loading DLLs
takes a non-neglibile amount of time), we use the established technique
to load DLLs only when, and if, needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows Vista (and later) actually have a working poll(), but we still
cannot use it because it only works on sockets.
So let's detect when we are targeting Windows Vista and undefine those
constants, and define `pollfd` so that we can declare our own pollfd
struct.
We also need to make sure that we override those constants *after*
`winsock2.h` has been `#include`d (otherwise we would not really
override those constants).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further fix for O_APPEND emulation on Windows
* js/mingw-o-append:
mingw: fix mingw_open_append to work with named pipes
t0051: test GIT_TRACE to a windows named pipe
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
Among the three codepaths we use O_APPEND to open a file for
appending, one used for writing GIT_TRACE output requires O_APPEND
implementation that behaves sensibly when multiple processes are
writing to the same file. POSIX emulation used in the Windows port
has been updated to improve in this area.
* js/mingw-o-append:
mingw: enable atomic O_APPEND
The Windows CRT implements O_APPEND "manually": on write() calls, the
file pointer is set to EOF before the data is written. Clearly, this is
not atomic. And in fact, this is the root cause of failures observed in
t5552-skipping-fetch-negotiator.sh and t5503-tagfollow.sh, where
different processes write to the same trace file simultanously; it also
occurred in t5400-send-pack.sh, but there it was worked around in
71406ed4d6 ("t5400: avoid concurrent writes into a trace file",
2017-05-18).
Fortunately, Windows does support atomic O_APPEND semantics using the
file access mode FILE_APPEND_DATA. Provide an implementation that does.
This implementation is minimal in such a way that it only implements
the open modes that are actually used in the Git code base. Emulation
for other modes can be added as necessary later. To become aware of
the necessity early, the unusal error ENOSYS is reported if an
unsupported mode is encountered.
Diagnosed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 60f487ac0e (Remove common-cmds.h, 2018-05-10), we forgot to adjust
this README when removing the common-cmds.h file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change also allows us to stop overriding argv[0] with the absolute
path of the executable, allowing us to preserve e.g. the case of the
executable's file name.
This fixes https://github.com/git-for-windows/git/issues/1496 partially.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, strftime() does not silently ignore invalid formats, but
warns about them and then returns 0 and sets errno to EINVAL.
Unfortunately, Git does not expect such a behavior, as it disagrees
with strftime()'s semantics on Linux. As a consequence, Git
misinterprets the return value 0 as "I need more space" and grows the
buffer. As the larger buffer does not fix the format, the buffer grows
and grows and grows until we are out of memory and abort.
Ideally, we would switch off the parameter validation just for
strftime(), but we cannot even override the invalid parameter handler
via _set_thread_local_invalid_parameter_handler() using MINGW because
that function is not declared. Even _set_invalid_parameter_handler(),
which *is* declared, does not help, as it simply does... nothing.
So let's just bite the bullet and override strftime() for MINGW and
abort on an invalid format string. While this does not provide the
best user experience, it is the best we can do.
See https://msdn.microsoft.com/en-us/library/fe06s4ak.aspx for more
details.
This fixes https://github.com/git-for-windows/git/issues/863
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Replace the mailing address of FSF to a URL, as FSF prefers.
* tz/fsf-address-update:
Replace Free Software Foundation address in license notices
Replace Free Software Foundation address in license notices
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "2>&1" notation in Powershell and in Unix shells implies that stderr
is redirected to the same handle into which stdout is already written.
Let's use this special value to allow the same trick with
GIT_REDIRECT_STDERR and GIT_REDIRECT_STDOUT: if the former's value is
`2>&1`, then stderr will simply be written to the same handle as stdout.
The functionality was suggested by Jeff Hostetler.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Particularly when calling Git from applications, such as Visual Studio's
Team Explorer, it is important that stdin/stdout/stderr are closed
properly. However, when spawning processes on Windows, those handles
must be marked as inheritable if we want to use them, but that flag is a
global flag and may very well be used by other spawned processes which
then do not know to close those handles.
Let's introduce a set of environment variables (GIT_REDIRECT_STDIN and
friends) that specify paths to files, or even better, named pipes (which
are similar to Unix sockets) and that are used by the spawned Git
process. This helps work around above-mentioned issue: those named
pipes will be opened in a non-inheritable way upon startup, and no
handles are passed around (and therefore no inherited handles need to be
closed by any spawned child).
This feature shipped with Git for Windows (marked as experimental) since
v2.11.0(2), so it has seen some serious testing in the meantime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backports a moral equivalent of 2015 fix to the poll emulation from
the upstream gnulib to fix occasional breakages on HPE NonStop.
* rb/compat-poll-fix:
poll.c: always set revents, even if to zero
A common mistake when writing binary search is to allow possible
integer overflow by using the simple average:
mid = (min + max) / 2;
Instead, use the overflow-safe version:
mid = min + (max - min) / 2;
This translation is safe since the operation occurs inside a loop
conditioned on "min < max". The included changes were found using
the following git grep:
git grep '/ *2;' '*.c'
Making this cleanup will prevent future review friction when a new
binary search is contructed based on existing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backports a moral equivalent of 2015 fix to the poll emulation from
the upstream gnulib to fix occasional breakages on HPE NonStop.
* rb/compat-poll-fix:
poll.c: always set revents, even if to zero
Match what is done to pfd[i].revents when compute_revents() returns
0 to the upstream gnulib's commit d42461c3 ("poll: fixes for large
fds", 2015-02-20). The revents field is set to 0, without
incrementing the value rc to be returned from the function. The
original code left the field to whatever random value the field was
initialized to.
This fixes occasional hangs in git-upload-pack on HPE NonStop.
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dynamic loading of DLL functions is duplicated in several places in Git
for Windows' source code.
This patch adds a pair of macros to simplify the process: the
DECLARE_PROC_ADDR(<dll>, <return-type>, <function-name>,
...<function-parameter-types>...) macro to be used at the beginning of a
code block, and the INIT_PROC_ADDR(<function-name>) macro to call before
using the declared function. The return value of the INIT_PROC_ADDR()
call has to be checked; If it is NULL, the function was not found in the
specified DLL.
Example:
DECLARE_PROC_ADDR(kernel32.dll, BOOL, CreateHardLinkW,
LPCWSTR, LPCWSTR, LPSECURITY_ATTRIBUTES);
if (!INIT_PROC_ADDR(CreateHardLinkW))
return error("Could not find CreateHardLinkW() function";
if (!CreateHardLinkW(source, target, NULL))
return error("could not create hardlink from %S to %S",
source, target);
return 0;
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new get_be64 macro to enable 64 bit endian conversions on memory
that may or may not be aligned.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/bswap-ubsan-fix:
bswap: convert get_be16, get_be32 and put_be32 to inline functions
bswap: convert to unsigned before shifting in get_be32
Code clean-up.
* rs/bswap-ubsan-fix:
bswap: convert get_be16, get_be32 and put_be32 to inline functions
bswap: convert to unsigned before shifting in get_be32
If realloc() fails then the original buffer is still valid. Free it
before exiting the function.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
Simplify the implementation and allow callers to use expressions with
side-effects by turning the macros get_be16, get_be32 and put_be32 into
inline functions.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pointer p is dereferenced and we get an unsigned char. Before
shifting it's automatically promoted to int. Left-shifting a signed
32-bit value bigger than 127 by 24 places is undefined. Explicitly
convert to a 32-bit unsigned type to avoid undefined behaviour if
the highest bit is set.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cygwin can use an UNC path like //server/share/repo
$ cd //server/share/dir
$ mkdir test
$ cd test
$ git init --bare
However, when we try to push from a local Git repository to this repo,
there is a problem: Git converts the leading "//" into a single "/".
As cygwin handles an UNC path so well, Git can support them better:
- Introduce cygwin_offset_1st_component() which keeps the leading "//",
similar to what Git for Windows does.
- Move CYGWIN out of the POSIX in the tests for path normalization in t0060
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
"foo\bar\baz" in "git fetch foo\bar\baz", even though there is no
slashes in it, cannot be a nickname for a remote on Windows, as
that is likely to be a pathname on a local filesystem.
* js/bs-is-a-dir-sep-on-windows:
Windows: do not treat a path with backslashes as a remote's nick name
mingw.h: permit arguments with side effects for is_dir_sep
"foo\bar\baz" in "git fetch foo\bar\baz", even though there is no
slashes in it, cannot be a nickname for a remote on Windows, as
that is likely to be a pathname on a local filesystem.
* js/bs-is-a-dir-sep-on-windows:
Windows: do not treat a path with backslashes as a remote's nick name
mingw.h: permit arguments with side effects for is_dir_sep
On Windows, certain characters are prohibited in file names, most
prominently the colon. When fopen() is called with such an invalid file
name, the underlying Windows API actually reports a particular error,
but since there is no suitable errno value, this error is translated
to EINVAL. Detect the case and report ENOENT instead.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git is built with the FREAD_READS_DIRECTORIES build variable set, this
would cause sparse to issue a 'not declared, should it be static?' warning
on Linux. This is a result of the method employed by 'compat/fopen.c' to
suppress the (possible) redefinition of the (system) fopen macro, which
also removes the extern declaration of the git_fopen function.
In order to suppress the warning, introduce a new macro to suppress the
definition (or possibly the re-definition) of the fopen symbol as a macro
override. This new macro (SUPPRESS_FOPEN_REDEFINITION) is only defined in
'compat/fopen.c', just prior to the inclusion of the 'git-compat-util.h'
header file.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows the environment variable PATH contains a semicolon-separated
list of directories to search for, in order, when looking for the
location of a binary to run. get_path_split() parses it and returns an
array of string copies, which is iterated by path_lookup(), which in
turn passes each entry to lookup_prog().
Change lookup_prog() to take the directory name as a length-limited
string instead of as a NUL-terminated one and parse PATH directly in
path_lookup(). This avoids memory allocations, simplifying the code.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taking git-compat-util.h's cue (which uses an inline function to back
is_dir_sep()), let's use an inline function to back also the Windows
version of is_dir_sep(). This avoids problems when calling the function
with arguments that do more than just provide a single character, e.g.
incrementing a pointer. Example:
is_dir_sep(*p++)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we could not convert the UTF-8 sequence into Unicode for writing to
the Console, we should not try to write an insanely-long sequence of
invalid wide characters (mistaking the negative return value for an
unsigned length).
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To initialize the foreground color attributes of "plain text", our ANSI
emulation tries to infer them from the currently attached console while
running the is_console() function. This function first tries to detect any
console attached to stdout, then it is called with stderr.
If neither stdout nor stderr has any console attached, it does not
actually matter what we use for "plain text" attributes, as we never need
to output any text to any console in that case.
However, after working on stdout and stderr, is_console() is called with
stdin, and it still tries to initialize the "plain text" attributes if
they had not been initialized earlier. In this case, we cannot detect any
attributes, and we used an uninitialized value for them.
Naturally, Coverity complained about this use case because it could not
reason about the code deeply enough to figure out that we do not even use
those attributes in that case.
Let's just initialize the value to 0 in that case, both to avoid future
Coverity reports, and to help catch future regressions in case anybody
changes the order of the is_console() calls (which would make the text
black on black).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the (admittedly, concocted) case that PATH consists only of path
delimiters, we would leak the duplicated string.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When removing the hack for isatty(), we actually removed more than just
an isatty() hack: we removed the hack where internal data structures of
the MSVC runtime are modified in order to redirect stdout/stderr.
Instead of using that hack (that does not work with newer versions of
the runtime, anyway), we replaced it by reopening the respective file
descriptors.
What we forgot was to mark stderr as unbuffered again.
Reported by Hannes Sixt. Fixed with Jeff Hostetler's assistance.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
The function qsort_s() was introduced with C11 Annex K; it provides the
ability to pass a context pointer to the comparison function, supports
the convention of using a NULL pointer for an empty array and performs a
few safety checks.
Add an implementation based on compat/qsort.c for platforms that lack a
native standards-compliant qsort_s() (i.e. basically everyone). It
doesn't perform the full range of possible checks: It uses size_t
instead of rsize_t and doesn't check nmemb and size against RSIZE_MAX
because we probably don't have the restricted size type defined. For
the same reason it returns int instead of errno_t.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version of the "replace isatty() hack" that got merged a few
weeks ago did not actually reflect the latest iteration of the patch
series: v3 was sent out with these changes, as requested by the
reviewer Johannes Sixt:
- reworded the comment about "recycling handles"
- moved the reassignment of the `console` variable before the dup2()
call so that it is valid at all times
- removed the "handle = INVALID_HANDLE_VALUE" assignment, as the local
variable `handle` is not used afterwards anyway
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A potential but unlikely buffer overflow in Windows port has been
fixed.
* mk/mingw-winansi-ttyname-termination-fix:
mingw: consider that UNICODE_STRING::Length counts bytes
Update the isatty() emulation for Windows by updating the previous
hack that depended on internals of (older) MSVC runtime.
* js/mingw-isatty:
mingw: replace isatty() hack
mingw: fix colourization on Cygwin pseudo terminals
mingw: adjust is_console() to work with stdin
A potential but unlikely buffer overflow in Windows port has been
fixed.
* mk/mingw-winansi-ttyname-termination-fix:
mingw: consider that UNICODE_STRING::Length counts bytes
Git for Windows has carried a patch that depended on internals
of MSVC runtime, but it does not work correctly with recent MSVC
runtime. A replacement was written originally for compiling
with VC++. The patch in this message is a backport of that
replacement, and it also fixes the previous attempt to make
isatty() tell that /dev/null is *not* an interactive terminal.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Tested-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git only colours the output and uses pagination if isatty() returns 1.
MSYS2 and Cygwin emulate pseudo terminals via named pipes, meaning that
isatty() returns 0.
f7f90e0f4f (mingw: make isatty() recognize MSYS2's pseudo terminals
(/dev/pty*), 2016-04-27) fixed this for MSYS2 terminals, but not for
Cygwin.
The named pipes that Cygwin and MSYS2 use are very similar. MSYS2 PTY pipes
are called 'msys-*-pty*' and Cygwin uses 'cygwin-*-pty*'. This commit
modifies the existing check to allow both MSYS2 and Cygwin PTY pipes to be
identified as TTYs.
Note that pagination is still broken when running Git for Windows from
within Cygwin, as MSYS2's less.exe is spawned (and does not like to
interact with Cygwin's PTY).
This partially fixes https://github.com/git-for-windows/git/issues/267
Signed-off-by: Alan Davies <alan.n.davies@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When determining whether a handle corresponds to a *real* Win32 Console
(as opposed to, say, a character device such as /dev/null), we use the
GetConsoleOutputBufferInfo() function as a tell-tale.
However, that does not work for *input* handles associated with a
console. Let's just use the GetConsoleMode() function for input handles,
and since it does not work on output handles fall back to the previous
method for those.
This patch prepares for using is_console() instead of my previous
misguided attempt in cbb3f3c9b1 (mingw: intercept isatty() to handle
/dev/null as Git expects it, 2016-12-11) that broke everything on
Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
UNICODE_STRING::Length field means size of buffer in bytes[1],
despite of buffer itself being array of wchar_t. Because of that
terminating zero is placed twice as far. Fix it.
[1] https://msdn.microsoft.com/en-us/library/windows/desktop/aa380518.aspx
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git's source code calls isatty(), it really asks whether the
respective file descriptor is connected to an interactive terminal.
Windows' _isatty() function, however, determines whether the file
descriptor is associated with a character device. And NUL, Windows'
equivalent of /dev/null, is a character device.
Which means that for years, Git mistakenly detected an associated
interactive terminal when being run through the test suite, which
almost always redirects stdin, stdout and stderr to /dev/null.
This bug only became obvious, and painfully so, when the new
bisect--helper entered the `pu` branch and made the automatic build & test
time out because t6030 was waiting for an answer.
For details, see
https://msdn.microsoft.com/en-us/library/f4s0ddew.aspx
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tempfile (hence its user lockfile) API lets the caller to open
a file descriptor to a temporary file, write into it and then
finalize it by first closing the filehandle and then either
removing or renaming the temporary file. When the process spawns a
subprocess after obtaining the file descriptor, and if the
subprocess has not exited when the attempt to remove or rename is
made, the last step fails on Windows, because the subprocess has
the file descriptor still open. Open tempfile with O_CLOEXEC flag
to avoid this (on Windows, this is mapped to O_NOINHERIT).
* bw/mingw-avoid-inheriting-fd-to-lockfile:
mingw: ensure temporary file handles are not inherited by child processes
t6026-merge-attr: child processes must not inherit index.lock handles
On Windows, help.browser configuration variable used to be ignored,
which has been corrected.
* js/no-html-bypass-on-windows:
Revert "display HTML in default browser using Windows' shell API"
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
Move our implementation of strdup(3) out of compat/nedmalloc/ and
allow it to be used independently from USE_NED_ALLOCATOR. The
original nedmalloc doesn't come with strdup() and doesn't need it.
Only _users_ of nedmalloc need it, which was added when we imported
it to our compat/ hierarchy.
This reduces the difference of our copy of nedmalloc from the
original, making it easier to update, and allows for easier testing
and reusing of our version of strdup().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is locked and child processes inherit the handle to
said lock and the parent process wants to remove the lock before the
child process exits, on Windows there is a problem: it won't work
because files cannot be deleted if a process holds a handle on them.
The symptom:
Rename from 'xxx/.git/index.lock' to 'xxx/.git/index' failed.
Should I try again? (y/n)
Spawning child processes with bInheritHandles==FALSE would not work
because no file handles would be inherited, not even the hStdXxx
handles in STARTUPINFO (stdin/stdout/stderr).
Opening every file with O_NOINHERIT does not work, either, as e.g.
git-upload-pack expects inherited file handles.
This leaves us with the only way out: creating temp files with the
O_NOINHERIT flag. This flag is Windows-specific, however. For our
purposes, it is equivalent to O_CLOEXEC (which does not exist on
Windows), so let's just open temporary files with the O_CLOEXEC flag and
map that flag to O_NOINHERIT on Windows.
As Eric Wong pointed out, we need to be careful to handle the case where
the Linux headers used to compile Git support O_CLOEXEC but the Linux
kernel used to run Git does not: it returns an EINVAL.
This fixes the test that we just introduced to demonstrate the problem.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4804aab (help (Windows): Display HTML in default browser using
Windows' shell API, 2008-07-13), Git for Windows used to call
`ShellExecute()` to launch the default Windows handler for `.html`
files.
The idea was to avoid going through a shell script, for performance
reasons.
However, this change ignores the `help.browser` config setting. Together
with browsing help not being a performance-critical operation, let's
just revert that patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to "git daemon" tries to enable the socket-level
KEEPALIVE, but when it is spawned via inetd, the standard input
file descriptor may not necessarily be connected to a socket.
Suppress an ENOTSOCK error from setsockopt().
* ew/daemon-socket-keepalive:
Windows: add missing definition of ENOTSOCK
daemon: ignore ENOTSOCK from setsockopt
With GCC 6, the strdup() function is declared with the "nonnull"
attribute, stating that it is not allowed to pass a NULL value as
parameter.
In nedmalloc()'s reimplementation of strdup(), Postel's Law is heeded
and NULL parameters are handled gracefully. GCC 6 complains about that
now because it thinks that NULL cannot be passed to strdup() anyway.
Because the callers in this project of strdup() must be prepared to
call any implementation of strdup() supplied by the platform, so it
is pointless to pretend that it is OK to call it with NULL.
Remove the conditional based on NULL-ness of the input; this
squelches the warning. Check the return value of malloc() instead
to make sure we actually got the memory to write to.
See https://gcc.gnu.org/gcc-6/porting_to.html for details.
Diagnosed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some code in nedmalloc is indented in a funny way that could be
misinterpreted as if a line after a for loop was included in the loop
body, when it is not.
GCC 6 complains about this in DEVELOPER=YepSure mode.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit introduced the first use of ENOTSOCK. This macro is
not available on Windows. Define it as WSAENOTSOCK because that is the
corresponding error value reported by the Windows versions of socket
functions.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platform-specific code had non-ANSI strict declarations of C
functions that do not take any parameters, which has been
corrected.
* js/mingw-parameter-less-c-functions:
mingw: let the build succeed with DEVELOPER=1
In 84d32bf (sparse: Fix mingw_main() argument number/type errors,
2013-04-27), we addressed problems identified by the 'sparse' tool where
argv was declared inconsistently. The way we addressed it was by casting
from the non-const version to the const-version.
This patch is long overdue, fixing compat/mingw.h's declaration to
make the "argv" parameter const. This also allows us to lose the
"const" trickery introduced earlier to common-main.c:main().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently introduced developer flags identified a couple of
old-style function declarations in the Windows-specific code where
the parameter list was left empty instead of specifying "void"
explicitly. Let's just fix them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 56a1a3ab ("Silence GCC's \"cast of pointer to integer of a
different size\" warning", 26-10-2015), sparse has been issuing a macro
redefinition warning for the SIZE_MAX macro. However, gcc did not issue
any such warning.
After commit 56a1a3ab, in terms of the order of #includes and #defines,
the code looked something like:
$ cat -n junk.c
1 #include <stddef.h>
2
3 #define SIZE_MAX ((size_t) -1)
4
5 #include <stdint.h>
6
7 int main(int argc, char *argv[])
8 {
9 return 0;
10 }
$
$ gcc junk.c
$
However, if you compile that file with -Wsystem-headers, then it will
also issue a warning. Having set -Wsystem-headers in CFLAGS, using the
config.mak file, then (on cygwin):
$ make compat/regex/regex.o
CC compat/regex/regex.o
In file included from /usr/lib/gcc/x86_64-pc-cygwin/4.9.3/include/stdint.h:9:0,
from compat/regex/regcomp.c:21,
from compat/regex/regex.c:77:
/usr/include/stdint.h:362:0: warning: "SIZE_MAX" redefined
#define SIZE_MAX (__SIZE_MAX__)
^
In file included from compat/regex/regex.c:69:0:
compat/regex/regex_internal.h:108:0: note: this is the location of the previous definition
# define SIZE_MAX ((size_t) -1)
^
$
The compilation of the compat/regex code is somewhat unusual in that the
regex.c file directly #includes the other c files (regcomp.c, regexec.c
and regex_internal.c). Commit 56a1a3ab added an #include of <stdint.h>
to the regcomp.c file, which results in the redefinition, since this is
included after the regex_internal.h header. This header file contains a
'fallback' definition for SIZE_MAX, in order to support systems which do
not have the <stdint.h> header (the HAVE_STDINT_H macro is not defined).
In order to suppress the warning, we move the #include of <stdint.h>
from regcomp.c to the start of the compilation unit, close to the top
of regex.c, prior to the #include of the regex_internal.h header.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "are we talking with TTY, doing an interactive session?"
detection has been updated to work better for "Git for Windows".
* kb/msys2-tty:
mingw: make isatty() recognize MSYS2's pseudo terminals (/dev/pty*)
The "are we talking with TTY, doing an interactive session?"
detection has been updated to work better for "Git for Windows".
* kb/msys2-tty:
mingw: make isatty() recognize MSYS2's pseudo terminals (/dev/pty*)
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
MSYS2 emulates pseudo terminals via named pipes, and isatty() returns 0
for such file descriptors. Therefore, some interactive functionality
(such as launching a pager, asking if a failed unlink should be repeated
etc.) doesn't work when run in a terminal emulator that uses MSYS2's
ptys (such as mintty).
However, MSYS2 uses special names for its pty pipes ('msys-*-pty*'),
which allows us to distinguish them from normal piped input / output.
On startup, check if stdin / stdout / stderr are connected to such pipes
using the NtQueryObject API from NTDll.dll. If the names match, adjust
the flags in MSVCRT's ioinfo structure accordingly.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some Windows SDK lacks pthread_sigmask() implementation and fails
to compile the recently updated "git push" codepath that uses it.
* jk/push-client-deadlock-fix:
Windows: only add a no-op pthread_sigmask() when needed
Windows: add pthread_sigmask() that does nothing
mmap emulation on Windows has been optimized and work better without
consuming paging store when not needed.
* js/win32-mmap:
mmap(win32): avoid expensive fstat() call
mmap(win32): avoid copy-on-write when it is unnecessary
win32mmap: set errno appropriately
Some Windows SDK lacks pthread_sigmask() implementation and fails
to compile the recently updated "git push" codepath that uses it.
* jk/push-client-deadlock-fix:
Windows: only add a no-op pthread_sigmask() when needed
Windows: add pthread_sigmask() that does nothing
t5504: drop sigpipe=ok from push tests
fetch-pack: isolate sigpipe in demuxer thread
send-pack: isolate sigpipe in demuxer thread
run-command: teach async threads to ignore SIGPIPE
send-pack: close demux pipe before finishing async process
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
In f924b52 (Windows: add pthread_sigmask() that does nothing,
2016-05-01), we introduced a no-op for Windows. However, this breaks
building Git in Git for Windows' SDK because pthread_sigmask() is
already a no-op there, #define'd in the pthread_signal.h header in
/mingw64/x86_64-w64-mingw32/include/.
Let's wrap the definition of pthread_sigmask() in a guard that skips
it when compiling with MinGW-w64' headers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, the definition of the MINGW version of
`mark_as_git_dir()` slipped into this developer's patch series to
support building Git for Windows.
As the `mark_as_git_dir()` function is not needed at all anymore (it was
used originally to support the core.hideDotFiles = gitDirOnly setting,
but we now use a different method to support that case), let's just
remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upcoming OpenSSL 1.1.0 will break compilation b updating a few APIs
we use in imap-send, which has been adjusted for the change.
* ky/imap-send-openssl-1.1.0:
configure: remove checking for HMAC_CTX_cleanup
imap-send: avoid deprecated TLSv1_method()
imap-send: check NULL return of SSL_CTX_new()
imap-send: use HMAC() function provided by OpenSSL
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change introduced a call to pthread_sigmask() in order to block
SIGPIPE in a thread. Since there are no signal facilities on Windows that
are similar to POSIX signals, just ignore the request to block the signal.
In the particular case, the effect of blocking SIGPIPE on POSIX is that
write() calls return EPIPE when the reader closes the pipe. This is how
write() behaves on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mmap emulation on Windows has been optimized and work better without
consuming paging store when not needed.
* js/win32-mmap:
mmap(win32): avoid expensive fstat() call
mmap(win32): avoid copy-on-write when it is unnecessary
win32mmap: set errno appropriately
Upcoming OpenSSL 1.1.0 will break compilation b updating a few APIs
we use in imap-send, which has been adjusted for the change.
* ky/imap-send-openssl-1.1.0:
configure: remove checking for HMAC_CTX_cleanup
imap-send: avoid deprecated TLSv1_method()
imap-send: check NULL return of SSL_CTX_new()
imap-send: use HMAC() function provided by OpenSSL
On Windows, we have to emulate the fstat() call to fill out information
that takes extra effort to obtain, such as the file permissions/type.
If all we want is the file size, we can use the much cheaper
GetFileSizeEx() function (available since Windows XP).
Suggested by Philip Kelley.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
