Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a coccinelle rule which covers the rest of the macros guarded by
"USE_THE_INDEX_COMPATIBILITY_MACROS" cache.h. If the result of this
were applied it can be reduced down to just:
#ifdef USE_THE_INDEX_COMPATIBILITY_MACROS
extern struct index_state the_index;
#endif
But that patch is just under 2000 lines, so let's first add this as a
"pending", and then incrementally pick changes from it in subsequent
commits. In doing that we'll migrate rules from this
"index-compatibility.pending.cocci" to the "index-compatibility.cocci"
created in a preceding commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Address the root cause of technical debt we've been carrying since
sha1collisiondetection was made the default in [1]. In a preceding
commit we narrowly fixed a bug where the "DC_SHA1" variable would be
unset (in combination with "NO_APPLE_COMMON_CRYPTO=" on OSX), even
though we had the sha1collisiondetection library enabled.
But the only reason we needed to have such a user-exposed knob went
away with [1], and it's been doing nothing useful since then. We don't
care if you define DC_SHA1=*, we only care that you don't ask for any
other SHA-1 implementation. If it turns out that you didn't, we'll use
sha1collisiondetection, whether you had "DC_SHA1" set or not.
As a result of this being confusing we had e.g. [2] for cmake and the
recent [3] for ci/lib.sh setting "DC_SHA1" explicitly, even though
this was always a NOOP.
A much simpler way to do this is to stop having the Makefile and
CMakeLists.txt set "DC_SHA1" to be picked up by the test-lib.sh, let's
instead add a trivial "test-tool sha1-is-sha1dc". It returns zero if
we're using sha1collisiondetection, non-zero otherwise.
1. e6b07da278 (Makefile: make DC_SHA1 the default, 2017-03-17)
2. c4b2f41b5f (cmake: support for testing git with ctest, 2020-06-26)
3. 1ad5c3df35 (ci: use DC_SHA1=YesPlease on osx-clang job for CI,
2022-10-20)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
A bugfix to "git subtree" in its split and merge features.
* pb/subtree-split-and-merge-after-squashing-tag-fix:
subtree: fix split after annotated tag was squashed merged
subtree: fix squash merging after annotated tag was squashed merged
subtree: process 'git-subtree-split' trailer in separate function
subtree: use named variables instead of "$@" in cmd_pull
subtree: define a variable before its first use in 'find_latest_squash'
subtree: prefix die messages with 'fatal'
subtree: add 'die_incompatible_opt' function to reduce duplication
subtree: use 'git rev-parse --verify [--quiet]' for better error messages
test-lib-functions: mark 'test_commit' variables as 'local'
Update to build procedure with VS using CMake/CTest.
* js/cmake-updates:
cmake: increase time-out for a long-running test
cmake: avoid editing t/test-lib.sh
add -p: avoid ambiguous signed/unsigned comparison
cmake: copy the merge tools for testing
cmake: make it easier to diagnose regressions in CTest runs
The previous commit fixed a failure in 'git subtree merge --squash' when
the previous squash-merge merged an annotated tag of the subtree
repository which is missing locally.
The same failure happens in 'git subtree split', either directly or when
called by 'git subtree push', under the same circumstances: 'cmd_split'
invokes 'find_existing_splits', which loops through previous commits and
invokes 'git rev-parse' (via 'process_subtree_split_trailer') on the
value of any 'git subtree-split' trailer it finds. This fails if this
value is the hash of an annotated tag which is missing locally.
Add a new optional argument 'repository' to 'cmd_split' and
'find_existing_splits', and invoke 'cmd_split' with that argument from
'cmd_push'. This allows 'process_subtree_split_trailer' to try to fetch
the missing tag from the 'repository' if it's not available locally,
mirroring the new behaviour of 'git subtree pull' and 'git subtree
merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git subtree merge --squash $ref' is invoked, either directly or
through 'git subtree pull --squash $repo $ref', the code looks for the
latest squash merge of the subtree in order to create the new merge
commit as a child of the previous squash merge.
This search is done in function 'process_subtree_split_trailer', invoked
by 'find_latest_squash', which looks for the most recent commit with a
'git-subtree-split' trailer; that trailer's value is the object name in
the subtree repository of the ref that was last squash-merged. The
function verifies that this object is present locally with 'git
rev-parse', and aborts if it's not.
The hash referenced by the 'git-subtree-split' trailer is guaranteed to
correspond to a commit since it is the result of running 'git rev-parse
-q --verify "$1^{commit}"' on the first argument of 'cmd_merge' (this
corresponds to 'rev' in 'cmd_merge' which is passed through to
'new_squash_commit' and 'squash_msg').
But this is only the case since e4f8baa88a (subtree: parse revs in
individual cmd_ functions, 2021-04-27), which went into Git 2.32. Before
that commit, 'cmd_merge' verified the revision it was given using 'git
rev-parse --revs-only "$@"'. Such an invocation, when fed the name of an
annotated tag, would return the hash of the tag, not of the commit
referenced by the tag.
This leads to a failure in 'find_latest_squash' when squash-merging if
the most recent squash-merge merged an annotated tag of the subtree
repository, using a pre-2.32 version of 'git subtree', unless that
previous annotated tag is present locally (which is not usually the
case).
We can fix this by fetching the object directly by its hash in
'process_subtree_split_trailer' when 'git rev-parse' fails, but in order
to do so we need to know the name or URL of the subtree repository.
This is not possible in general for 'git subtree merge', but is easy
when it is invoked through 'git subtree pull' since in that case the
subtree repository is passed by the user at the command line.
Allow the 'git subtree pull' scenario to work out-of-the-box by adding
an optional 'repository' argument to functions 'cmd_merge',
'find_latest_squash' and 'process_subtree_split_trailer', and invoke
'cmd_merge' with that 'repository' argument in 'cmd_pull'.
If 'repository' is absent in 'process_subtree_split_trailer', instruct
the user to try fetching the missing object directly.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both functions 'find_latest_squash' (called by 'git subtree merge
--squash' and 'git subtree split --rejoin') and 'find_existing_splits'
(called by git 'subtree split') loop through commits that have a
'git-subtree-dir' trailer, and then process the 'git-subtree-mainline'
and 'git-subtree-split' trailers for those commits.
The processing done for the 'git-subtree-split' trailer is simple: we
check if the object exists with 'rev-parse' and set the variable
'sub' to the object name, or we die if the object does not exist.
In a future commit we will add more steps to the processing of this
trailer in order to make the code more robust.
To reduce code duplication, move the processing of the
'git-subtree-split' trailer to a dedicated function,
'process_subtree_split_trailer'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'cmd_pull' already checks that only two arguments are given,
'repository' and 'ref'. Define variables with these names instead of
using the positional parameter $2 and "$@".
This will allow a subsequent commit to pass 'repository' to 'cmd_merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function 'find_latest_squash' takes a single argument, 'dir', but a
debug statement uses this variable before it takes its value from $1.
This statement thus gets the value of 'dir' from the calling function,
which currently is the same as the 'dir' argument, so it works but it
is confusing.
Move the definition of 'dir' before its first use.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just as was done in 0008d12284 (submodule: prefix die messages with
'fatal', 2021-07-10) for 'git-submodule.sh', make the 'die' messages
outputed by 'git-subtree.sh' more in line with the rest of the code base
by prefixing them with "fatal: ", and do not capitalize their first
letter.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9a3e3ca2ba (subtree: be stricter about validating flags, 2021-04-27)
added validation code to check that options given to 'git subtree <cmd>'
made sense with the command being used.
Refactor these checks by adding a 'die_incompatible_opt' function to
reduce code duplication.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three occurences of 'git rev-parse <rev>' in 'git-subtree.sh'
where the command expects a revision and the script dies or exits if the
revision can't be found. In that case, the error message from 'git
rev-parse' is:
$ git rev-parse <bad rev>
<bad rev>
fatal: ambiguous argument '<bad rev>': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
This is a little confusing to the user, since this error message is
outputed by 'git subtree'.
At these points in the script, we know that we are looking for a single
revision, so be explicit by using '--verify', resulting in a little
better error message:
$ git rev-parse --verify <bad rev>
fatal: Needed a single revision
In the two occurences where we 'die' if 'git rev-parse' fails, 'git
subtree' outputs "could not rev-parse split hash $b from commit $sq", so
we actually do not need the supplementary error message from 'git
rev-parse'; add '--quiet' to silence it.
In the third occurence, we 'exit', so keep the error message from 'git
rev-parse'. Note that this messsage is still suboptimal since it can be
understood to mean that 'git rev-parse' did not receive a single
revision as argument, which is not the case here: the command did
receive a single revision, but the revision is not resolvable to an
available object.
The alternative would be to use '--' after the revision, as suggested by
the first error message, resulting in a clearer error message:
$ git rev-parse <bad rev> --
fatal: bad revision '<bad rev>'
Unfortunately we can't use that syntax because in the more common case
of the revision resolving to a known object, the command outputs the
object's hash, a newline, and the dashdash, which breaks the 'git
subtree' script.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested in
https://github.com/git-for-windows/git/issues/3966#issuecomment-1221264238,
t7112 can run for well over one hour, which seems to be the default
maximum run time at least when running CTest-based tests in Visual
Studio.
Let's increase the time-out as a stop gap to unblock developers wishing
to run Git's test suite in Visual Studio.
Note: The actual run time is highly dependent on the circumstances. For
example, in Git's CI runs, the Windows-based tests typically take a bit
over 5 minutes to run. CI runs have the added benefit that Windows
Defender (the common anti-malware scanner on Windows) is turned off,
something many developers are not at liberty to do on their work
stations. When Defender is turned on, even on this developer's high-end
Ryzen system, t7112 takes over 15 minutes to run.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7f5397a07c (cmake: support for testing git when building out of the
source tree, 2020-06-26), we implemented support for running Git's test
scripts even after building Git in a different directory than the source
directory.
The way we did this was to edit the file `t/test-lib.sh` to override
`GIT_BUILD_DIR` to point somewhere else than the parent of the `t/`
directory.
This is unideal because it always leaves a tracked file marked as
modified, and it is all too easy to commit that change by mistake.
Let's change the strategy by teaching `t/test-lib.sh` to detect the
presence of a file called `GIT-BUILD-DIR` in the source directory. If it
exists, the contents are interpreted as the location to the _actual_
build directory. We then write this file as part of the CTest
definition.
To support building Git via a regular `make` invocation after building
it using CMake, we ensure that the `GIT-BUILD-DIR` file is deleted (for
convenience, this is done as part of the Makefile rule that is already
run with every `make` invocation to ensure that `GIT-BUILD-OPTIONS` is
up to date).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when running the tests via CTest, t7609 and t7610 rely on more than
only a few mergetools to be copied to the build directory. Let's make it
so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test script fails in Git's test suite, the usual course of action
is to re-run it using options to increase the verbosity of the output,
e.g. `-v` and `-x`.
Like in Git's CI runs, when running the tests in Visual Studio via the
CTest route, it is cumbersome or at least requires a very unintuitive
approach to pass options to the test scripts: the CMakeLists.txt file
would have to be modified, passing the desired options to _all_ test
scripts, and then the CMake Cache would have to be reconfigured before
running the test in question individually. Unintuitive at best, and
opposite to the niceties IDE users expect.
So let's just pass those options by default: This will not clutter any
output window but the log that is written to a log file will have
information necessary to figure out test failures.
While at it, also imitate what the Windows jobs in Git's CI runs do to
accelerate running the test scripts: pass the `--no-bin-wrappers` and
`--no-chain-lint` options.
This makes the test runs noticeably faster because the `bin-wrappers/`
scripts as well as the `chain-lint` code make heavy use of POSIX shell
scripting, which is really, really slow on Windows due to the need to
emulate POSIX behavior via the MSYS2 runtime. In a test by Eric
Sunshine, it added two minutes (!) just to perform the chain-lint task.
The idea of adding a CMake config option (á la `GIT_TEST_OPTS`) was
considered during the development of this patch, but then dropped: such
a setting is global, across _all_ tests, where e.g. `--run=...` would
not make sense. Users wishing to override these new defaults are better
advised running the test script manually, in a Git Bash, with full
control over the command line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, use of fsmonitor on a repository on networked
filesystem is disabled. Add knobs to make it workable on macOS.
* ed/fsmonitor-on-networked-macos:
fsmonitor: fix leak of warning message
fsmonitor: add documentation for allowRemote and socketDir options
fsmonitor: check for compatability before communicating with fsmonitor
fsmonitor: deal with synthetic firmlinks on macOS
fsmonitor: avoid socket location check if using hook
fsmonitor: relocate socket file if .git directory is remote
fsmonitor: refactor filesystem checks to common interface
If the .git directory is on a remote filesystem, create the socket
file in 'fsmonitor.socketDir' if it is defined, else create it in $HOME.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a common interface for getting basic filesystem information
including filesystem type and whether the filesystem is remote.
Refactor existing code for getting basic filesystem info and detecting
remote file systems to the new interface.
Refactor filesystem checks to leverage new interface. For macOS,
error-out if the Unix Domain socket (UDS) file is on a remote
filesystem.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like in all the other credential helpers, the osxkeychain helper
ignores unknown credential lines.
Add a comment (a la the other helpers) to make it clear and explicit
that this is the desired behaviour.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contrary to the documentation on credential helpers, as well as the help
text for git-credential-netrc itself, this helper will `die` when
presented with an unknown property/attribute/token.
Correct the behaviour here by skipping and ignoring any tokens that are
unknown. This means all helpers in the tree are consistent and ignore
any unknown credential properties/attributes.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is the expectation that credential helpers be liberal in what they
accept and conservative in what they return, to allow for future growth
and evolution of the protocol/interaction.
All of the other helpers (store, cache, osxkeychain, libsecret,
gnome-keyring) except `netrc` currently ignore any credential lines
that are not recognised, whereas the Windows helper (wincred) instead
dies.
Fix the discrepancy and ignore unknown lines in the wincred helper.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 't/test-results' directory and its contents are by-products of the
test process, so 'make clean' should remove them, but, alas, this has
been broken since fee65b194d (t/Makefile: don't remove test-results in
"clean-except-prove-cache", 2022-07-28).
The 'clean' target in 't/Makefile' was not directly responsible for
removing the 'test-results' directory, but relied on its dependency
'clean-except-prove-cache' to do that [1]. ee65b194d broke this,
because it only removed the 'rm -r test-results' command from the
'clean-except-prove-cache' target instead of moving it to the 'clean'
target, resulting in stray 't/test-results' directories.
Add that missing cleanup command to 't/Makefile', and to all
sub-Makefiles touched by that commit as well.
[1] 60f26f6348 (t/Makefile: retain cache t/.prove across prove runs,
2012-05-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hoist the remainder of "scalar" out of contrib/ to the main part of
the codebase.
* vd/scalar-to-main:
Documentation/technical: include Scalar technical doc
t/perf: add 'GIT_PERF_USE_SCALAR' run option
t/perf: add Scalar performance tests
scalar-clone: add test coverage
scalar: add to 'git help -a' command list
scalar: implement the `help` subcommand
git help: special-case `scalar`
scalar: include in standard Git build & installation
scalar: fix command documentation section header
Move 'scalar' out of 'contrib/' and into the root of the Git tree. The goal
of this change is to build 'scalar' as part of the standard Git build &
install processes.
This patch includes both the physical move of Scalar's files out of
'contrib/' ('scalar.c', 'scalar.txt', and 't9xxx-scalar.sh'), and the
changes to the build definitions in 'Makefile' and 'CMakelists.txt' to
accommodate the new program.
At a high level, Scalar is built so that:
- there is a 'scalar-objs' target (similar to those created in 029bac01a8
(Makefile: add {program,xdiff,test,git,fuzz}-objs & objects targets,
2021-02-23)) for debugging purposes.
- it appears in the root of the install directory (rather than the
gitexecdir).
- it is included in the 'bin-wrappers/' directory for use in tests.
- it receives a platform-specific executable suffix (e.g., '.exe'), if
applicable.
- 'scalar.txt' is installed as 'man1' documentation.
- the 'clean' target removes the 'scalar' executable.
Additionally, update the root level '.gitignore' file to ignore the Scalar
executable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the last section header in 'contrib/scalar/scalar.txt' from "Scalar"
to "GIT". The linting rules of the 'documentation' CI build enforce the
existence of a "GIT" section in command documentation. Although 'scalar.txt'
is not yet checked, it will be in a future patch.
Here, changing the header name is more appropriate than making a
Scalar-specific exception to the linting rule. The existing "Scalar" section
contains only a link back to the main Git documentation, essentially the
same as the "GIT" section in builtin documentation. Changing the section
name further clarifies the Scalar-Git association and maintains consistency
with the rest of Git.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By automatically invoking chainlint.sed upon each test it runs,
`test_run_` in test-lib.sh ensures that broken &&-chains will be
detected early as tests are modified or new are tests created since it
is typical to run a test script manually (i.e. `./t1234-test-script.sh`)
during test development. Now that the implementation of chainlint.pl is
complete, modify test-lib.sh to invoke it automatically instead of
chainlint.sed each time a test script is run.
This change reduces the number of "linter" invocations from 26800+ (once
per test run) down to 1050+ (once per test script), however, a
subsequent change will drop the number of invocations to 1 per `make
test`, thus fully realizing the benefit of the new linter.
Note that the "magic exit code 117" &&-chain checker added by bb79af9d09
(t/test-lib: introduce --chain-lint option, 2015-03-20) which is built
into t/test-lib.sh is retained since it has near zero-cost and
(theoretically) may catch a broken &&-chain not caught by chainlint.pl.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash prompt (in contrib/) learned to optionally indicate when
the index is unmerged.
* jd/prompt-show-conflict:
git-prompt: show presence of unresolved conflicts at command prompt
"scalar" now enables built-in fsmonitor on enlisted repositories,
when able.
* vd/scalar-enables-fsmonitor:
scalar: update technical doc roadmap with FSMonitor support
scalar unregister: stop FSMonitor daemon
scalar: enable built-in FSMonitor on `register`
scalar: move config setting logic into its own function
scalar-delete: do not 'die()' in 'delete_enlistment()'
scalar-[un]register: clearly indicate source of error
scalar-unregister: handle error codes greater than 0
scalar: constrain enlistment search
The "diagnose" feature to create a zip archive for diagnostic
material has been lifted from "scalar" and made into a feature of
"git bugreport".
* vd/scalar-generalize-diagnose:
scalar: update technical doc roadmap
scalar-diagnose: use 'git diagnose --mode=all'
builtin/bugreport.c: create '--diagnose' option
builtin/diagnose.c: add '--mode' option
builtin/diagnose.c: create 'git diagnose' builtin
diagnose.c: add option to configure archive contents
scalar-diagnose: move functionality to common location
scalar-diagnose: move 'get_disk_info()' to 'compat/'
scalar-diagnose: add directory to archiver more gently
scalar-diagnose: avoid 32-bit overflow of size_t
scalar-diagnose: use "$GIT_UNZIP" in test
If GIT_PS1_SHOWCONFLICTSTATE is set to "yes", show the word "CONFLICT"
on the command prompt when there are unresolved conflicts.
Example prompt: (main|CONFLICT)
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially on Windows, we will need to stop that daemon, just in case
that the directory needs to be removed (the daemon would otherwise hold
a handle to that directory, preventing it from being deleted).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the built-in FSMonitor makes many common commands quite a bit
faster. So let's teach the `scalar register` command to enable the
built-in FSMonitor and kick-start the fsmonitor--daemon process (for
convenience).
For simplicity, we only support the built-in FSMonitor (and no external
file system monitor such as e.g. Watchman).
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create function 'set_scalar_config()' to contain the logic used in setting
Scalar-defined Git config settings, including how to handle reconfiguring &
overwriting existing values. This function allows future patches to set
config values in parts of 'scalar.c' other than 'set_recommended_config()'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than exiting with 'die()' when 'delete_enlistment()' encounters an
error, return an error code with the appropriate message. There's no need
for an abrupt exit with 'die()' in 'delete_enlistment()' because its only
caller ('cmd_delete()') properly cleans up allocated resources and returns
the 'delete_enlistment()' return value as its own exit code.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a step in 'register_dir()' or 'unregister_dir()' fails, indicate which
step failed with an error message, rather than silently assigning a nonzero
return code.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'scalar unregister' tries to disable maintenance and remove an
enlistment, ensure that the return value is nonzero if either operation
produces *any* nonzero return value, not just when they return a value less
than 0.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the search for repository and enlistment root in
'setup_enlistment_directory()' more constrained to simplify behavior and
adhere to 'GIT_CEILING_DIRECTORIES'.
Previously, 'setup_enlistment_directory()' would check whether the provided
path (or current working directory) '<dir>' or its subdirectory '<dir>/src'
was a repository root. If not, the process would repeat on the parent of
'<dir>' until the repository was found or it reached the root of the
filesystem. This meant that a user could specify a path *anywhere* inside an
enlistment (including paths not in the repository contained within the
enlistment) and it would be found.
The downside to this process is that the search would not account for
'GIT_CEILING_DIRECTORIES', so the upward search could result in modifying
repository contents past 'GIT_CEILING_DIRECTORIES'. Similarly, operations
like 'scalar delete' could end up unintentionally deleting the parent of a
repo if its root was named 'src'.
To make this 'setup_enlistment_directory()' both adhere to
'GIT_CEILING_DIRECTORIES' and avoid unwanted deletions, the search for an
enlistment directory is simplified to:
- if '<dir>/src' is a repository root, '<dir>' is the enlistment root
- if '<dir>' is either the repository root or contained within a repository,
the repository root is the enlistment root
Now, only 'setup_git_directory()' (called by 'setup_enlistment_directory()')
searches upwards from the 'scalar' specified path, enforcing
'GIT_CEILING_DIRECTORIES' in the process. Additionally, 'scalar delete
<dir>/src' will not delete '<dir>' (if users would like to delete it, they
can still specify the enlistment root with 'scalar delete <dir>'). This is
true of any 'scalar' operation; users can invoke 'scalar' on the enlistment
root, but paths must otherwise be inside the repository to be valid.
To help clarify the updated behavior, new tests are added to
't9099-scalar.sh'.
Finally, this change leaves 'strbuf_parent_directory()' with only a single,
WIN32-specific caller in 'delete_enlistment()'. Rather than wrap
'strbuf_parent_directory()' in '#ifdef WIN32' to avoid the "unused function"
compiler error, move the contents of 'strbuf_parent_directory()' into
'delete_enlistment()' and remove the function.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace implementation of 'scalar diagnose' with an internal invocation of
'git diagnose --mode=all'. This simplifies the implementation of
'cmd_diagnose' by making it a direct alias of 'git diagnose' and removes
some code in 'scalar.c' that is duplicated in 'builtin/diagnose.c'. The
simplicity of the alias also sets up a clean deprecation path for 'scalar
diagnose' (in favor of 'git diagnose'), if that is desired in the future.
This introduces one minor change to the output of 'scalar diagnose', which
is that the prefix of the created zip archive is changed from 'scalar_' to
'git-diagnostics-'.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'create_diagnostics_archive()' to take an argument 'mode'. When
archiving diagnostics for a repository, 'mode' is used to selectively
include/exclude information based on its value. The initial options for
'mode' are:
* DIAGNOSE_NONE: do not collect any diagnostics or create an archive
(no-op).
* DIAGNOSE_STATS: collect basic repository metadata (Git version, repo path,
filesystem available space) as well as sizing and count statistics for the
repository's objects and packfiles.
* DIAGNOSE_ALL: collect basic repository metadata, sizing/count statistics,
and copies of the '.git', '.git/hooks', '.git/info', '.git/logs', and
'.git/objects/info' directories.
These modes are introduced to provide users the option to collect
diagnostics without the sensitive information included in copies of '.git'
dir contents. At the moment, only 'scalar diagnose' uses
'create_diagnostics_archive()' (with a hardcoded 'DIAGNOSE_ALL' mode to
match existing functionality), but more callers will be introduced in
subsequent patches.
Finally, refactor from a hardcoded set of 'add_directory_to_archiver()'
calls to iterative invocations gated by 'DIAGNOSE_ALL'. This allows for
easier future modification of the set of directories to archive and improves
error reporting when 'add_directory_to_archiver()' fails.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the core functionality of 'scalar diagnose' into a new 'diagnose.[c,h]'
library to prepare for new callers in the main Git tree generating
diagnostic archives. These callers will be introduced in subsequent patches.
While this patch appears large, it is mostly made up of moving code out of
'scalar.c' and into 'diagnose.c'. Specifically, the functions
- dir_file_stats_objects()
- dir_file_stats()
- count_files()
- loose_objs_stats()
- add_directory_to_archiver()
are all copied verbatim from 'scalar.c'. The 'create_diagnostics_archive()'
function is a mostly identical (partial) copy of 'cmd_diagnose()', with the
primary changes being that 'zip_path' is an input and "Enlistment root" is
corrected to "Repository root" in the archiver log.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move 'get_disk_info()' function into 'compat/'. Although Scalar-specific
code is generally not part of the main Git tree, 'get_disk_info()' will be
used in subsequent patches by additional callers beyond 'scalar diagnose'.
This patch prepares for that change, at which point this platform-specific
code should be part of 'compat/' as a matter of convention.
The function is copied *mostly* verbatim, with two exceptions:
* '#ifdef WIN32' is replaced with '#ifdef GIT_WINDOWS_NATIVE' to allow
'statvfs' to be used with Cygwin.
* the 'struct strbuf buf' and 'int res' (as well as their corresponding
cleanup & return) are moved outside of the '#ifdef' block.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a directory added to the 'scalar diagnose' archiver does not exist, warn
and return 0 from 'add_directory_to_archiver()' rather than failing with a
fatal error. This handles a failure edge case where the '.git/logs' has not
yet been created when running 'scalar diagnose', but extends to any
situation where a directory may be missing in the '.git' dir.
Now, when a directory is missing a warning is captured in the diagnostic
logs. This provides a user with more complete information than if 'scalar
diagnose' simply failed with an error.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid 32-bit size_t overflow when reporting the available disk space in
'get_disk_info' by casting the block size and available block count to
'off_t' before multiplying them. Without this change, 'st_mult' would
(correctly) report a size_t overflow on 32-bit systems at or exceeding 2^32
bytes of available space.
Note that 'off_t' is a 64-bit integer even on 32-bit systems due to the
inclusion of '#define _FILE_OFFSET_BITS 64' in 'git-compat-util.h' (see
b97e911643 (Support for large files on 32bit systems., 2007-02-17)).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the "$GIT_UNZIP" test variable rather than verbatim 'unzip' to unzip the
'scalar diagnose' archive. Using "$GIT_UNZIP" is needed to run the Scalar
tests on systems where 'unzip' is not in the system path.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend SANITIZE=leak checking and declare more tests "currently leak-free".
* ab/leak-check:
CI: use "GIT_TEST_SANITIZE_LEAK_LOG=true" in linux-leaks
upload-pack: fix a memory leak in create_pack_file()
leak tests: mark passing SANITIZE=leak tests as leak-free
leak tests: don't skip some tests under SANITIZE=leak
test-lib: have the "check" mode for SANITIZE=leak consider leak logs
test-lib: add a GIT_TEST_PASSING_SANITIZE_LEAK=check mode
test-lib: simplify by removing test_external
tests: move copy/pasted PERL + Test::More checks to a lib-perl.sh
t/Makefile: don't remove test-results in "clean-except-prove-cache"
test-lib: add a SANITIZE=leak logging mode
t/README: reword the "GIT_TEST_PASSING_SANITIZE_LEAK" description
test-lib: add a --invert-exit-code switch
test-lib: fix GIT_EXIT_OK logic errors, use BAIL_OUT
test-lib: don't set GIT_EXIT_OK before calling test_atexit_handler
test-lib: use $1, not $@ in test_known_broken_{ok,failure}_
"rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
source: <PH7PR14MB5594A27B9295E95ACA4D6A69CE8F9@PH7PR14MB5594.namprd14.prod.outlook.com>
* cl/rerere-train-with-no-sign:
contrib/rerere-train: avoid useless gpg sign in training
