In fetch_pack() (and all functions it calls), pass
OBJECT_INFO_SKIP_FETCH_OBJECT whenever we query an object that could be
a tree or blob that we do not want to be lazy-fetched even if it is
absent. Thus, the only lazy-fetches occurring for trees and blobs are
when resolving deltas.
Thus, we can remove fetch_if_missing=0 from builtin/fetch.c. Remove
this, and also add a test ensuring that such objects are not
lazy-fetched. (We might be able to remove fetch_if_missing=0 from other
places too, but I have limited myself to builtin/fetch.c in this commit
because I have not written tests for the other commands yet.)
Note that commits and tags may still be lazy-fetched. I limited myself
to objects that could be trees or blobs here because Git does not
support creating such commit- and tag-excluding clones yet, and even if
such a clone were manually created, Git does not have good support for
fetching a single commit (when fetching a commit, it and all its
ancestors would be sent).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose, from a repository that has ".gitmodules", we clone with
--filter=blob:none:
git clone --filter=blob:none --no-checkout \
https://kernel.googlesource.com/pub/scm/git/git
Then we fetch:
git -C git fetch
This will cause a "unable to load config blob object", because the
fetch_config_from_gitmodules() invocation in cmd_fetch() will attempt to
load ".gitmodules" (which Git knows to exist because the client has the
tree of HEAD) while fetch_if_missing is set to 0.
fetch_if_missing is set to 0 too early - ".gitmodules" here should be
lazily fetched. Git must set fetch_if_missing to 0 before the fetch
because as part of the fetch, packfile negotiation happens (and we do
not want to fetch any missing objects when checking existence of
objects), but we do not need to set it so early. Move the setting of
fetch_if_missing to the earliest possible point in cmd_fetch(), right
before any fetching happens.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leakfix.
* cb/pcre2-chartables-leakfix:
grep: avoid leak of chartables in PCRE2
grep: make PCRE2 aware of custom allocator
grep: make PCRE1 aware of custom allocator
"git stash save" lost local changes to submodules, which has been
corrected.
* jj/stash-reset-only-toplevel:
stash: avoid recursive hard reset on submodules
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
94da9193a6 (grep: add support for PCRE v2, 2017-06-01) didn't include
a way to override the system allocator, and so it is incompatible with
custom allocators (e.g. nedmalloc). This problem became obvious when we
tried to plug a memory leak by `free()`ing a data structure allocated by
PCRE2, triggering a segfault in Windows (where we use nedmalloc by
default).
PCRE2 requires the use of a general context to override the allocator
and therefore, there is a lot more code needed than in PCRE1, including
a couple of wrapper functions.
Extend the grep API with a "destructor" that could be called to cleanup
any objects that were created and used globally.
Update `builtin/grep.c` to use that new API, but any other future users
should make sure to have matching `grep_init()`/`grep_destroy()` calls
if they are using the pattern matching functionality.
Move some of the logic that was before done per thread (in the workers)
into an earlier phase to avoid degrading performance, but as the use of
PCRE2 with custom allocators is better understood it is expected more of
its functions will be instructed to use the custom allocator as well as
was done in the original code[1] this work was based on.
[1] https://public-inbox.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to fast-import/export.
* en/fast-imexport-nested-tags:
fast-export: handle nested tags
t9350: add tests for tags of things other than a commit
fast-export: allow user to request tags be marked with --mark-tags
fast-export: add support for --import-marks-if-exists
fast-import: add support for new 'alias' command
fast-import: allow tags to be identified by mark labels
fast-import: fix handling of deleted tags
fast-export: fix exporting a tag and nothing else
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
"git fetch --jobs=<n>" allowed <n> parallel jobs when fetching
submodules, but this did not apply to "git fetch --multiple" that
fetches from multiple remote repositories. It now does.
* js/fetch-jobs:
fetch: let --jobs=<n> parallelize --multiple, too
The merge-recursive machiery is one of the most complex parts of
the system that accumulated cruft over time. This large series
cleans up the implementation quite a bit.
* en/merge-recursive-cleanup: (26 commits)
merge-recursive: fix the fix to the diff3 common ancestor label
merge-recursive: fix the diff3 common ancestor label for virtual commits
merge-recursive: alphabetize include list
merge-recursive: add sanity checks for relevant merge_options
merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*
merge-recursive: split internal fields into a separate struct
merge-recursive: avoid losing output and leaking memory holding that output
merge-recursive: comment and reorder the merge_options fields
merge-recursive: consolidate unnecessary fields in merge_options
merge-recursive: move some definitions around to clean up the header
merge-recursive: rename merge_options argument to opt in header
merge-recursive: rename 'mrtree' to 'result_tree', for clarity
merge-recursive: use common name for ancestors/common/base_list
merge-recursive: fix some overly long lines
cache-tree: share code between functions writing an index as a tree
merge-recursive: don't force external callers to do our logging
merge-recursive: remove useless parameter in merge_trees()
merge-recursive: exit early if index != head
Ensure index matches head before invoking merge machinery, round N
merge-recursive: remove another implicit dependency on the_repository
...
git stash push does not recursively stash submodules, but if
submodule.recurse is set, it may recursively reset --hard them. Having
only the destructive action recurse is likely to be surprising
behaviour, and unlikely to be desirable, so the easiest fix should be to
ensure that the call to git reset --hard never recurses into submodules.
This matches the behavior of check_changes_tracked_files, which ignores
submodules.
Signed-off-by: Jakob Jarmar <jakob@jarmar.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash apply" in a subdirectory of a secondary worktree failed
to access the worktree correctly, which has been corrected.
* js/stash-apply-in-secondary-worktree:
stash apply: report status correctly even in a worktree's subdirectory
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
"git clean" fixes.
* en/clean-nested-with-ignored:
dir: special case check for the possibility that pathspec is NULL
clean: fix theoretical path corruption
clean: rewrap overly long line
clean: avoid removing untracked files in a nested git repository
clean: disambiguate the definition of -d
git-clean.txt: do not claim we will delete files with -n/--dry-run
dir: add commentary explaining match_pathspec_item's return value
dir: if our pathspec might match files under a dir, recurse into it
dir: make the DO_MATCH_SUBMODULE code reusable for a non-submodule case
dir: also check directories for matching pathspecs
dir: fix off-by-one error in match_pathspec_item
dir: fix typo in comment
t7300: add testcases showing failure to clean specified pathspecs
The code used in following tags in "git fetch" has been optimized.
* ms/fetch-follow-tag-optim:
fetch: use oidset to keep the want OIDs for faster lookup
A pair of small fixups to "git commit-graph" have been applied.
* jk/commit-graph-cleanup:
commit-graph: turn off save_commit_buffer
commit-graph: don't show progress percentages while expanding reachable commits
The name of the blob object that stores the filter specification
for sparse cloning/fetching was interpreted in a wrong place in the
code, causing Git to abort.
* jk/partial-clone-sparse-blob:
list-objects-filter: use empty string instead of NULL for sparse "base"
list-objects-filter: give a more specific error sparse parsing error
list-objects-filter: delay parsing of sparse oid
t5616: test cloning/fetching with sparse:oid=<oid> filter
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
Comments stating that "struct hashmap_entry" must be the first
member in a struct are no longer valid.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by list_for_each_entry in the Linux kernel.
Once again, these are somewhat compromised usability-wise
by compilers lacking __typeof__ support.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git wants to spawn a child Git process inside a worktree's
subdirectory while `GIT_DIR` is set, we need to take care of specifying
the work tree's top-level directory explicitly because it cannot be
discovered: the current directory is _not_ the top-level directory of
the work tree, and neither is it inside the parent directory of
`GIT_DIR`.
This fixes the problem where `git stash apply` would report pretty much
everything deleted or untracked when run inside a worktree's
subdirectory.
To make sure that we do not introduce the "reverse problem", i.e. when
`GIT_WORK_TREE` is defined but `GIT_DIR` is not, we simply make sure
that both are set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, `--jobs=<n>` only parallelizes submodule fetches/clones, not
`--multiple` fetches, which is unintuitive, given that the option's name
does not say anything about submodules in particular.
Let's change that. With this patch, also fetches from multiple remotes
are parallelized.
For backwards-compatibility (and to prepare for a use case where
submodule and multiple-remote fetches may need different parallelization
limits), the config setting `submodule.fetchJobs` still only controls
the submodule part of `git fetch`, while the newly-introduced setting
`fetch.parallel` controls both (but can be overridden for submodules
with `submodule.fetchJobs`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is marked as `NORETURN`, and it indeed does not want to
return anything. So let's not declare it with the return type `int`.
This fixes the following warning when building with MSVC:
C4646: function declared with 'noreturn' has non-void return type
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, --mark-tags, which will output mark identifiers with
each tag object. This improves the incremental export story with
--export-marks since it will allow us to record that annotated tags have
been exported, and it is also needed as a step towards supporting nested
tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import has support for both an --import-marks flag and an
--import-marks-if-exists flag; the latter of which will not die() if the
file does not exist. fast-export only had support for an --import-marks
flag; add an --import-marks-if-exists flag for consistency.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add trace2 regions in transport.c and builtin/push.c to better track
time spent in various phases of pushing:
* Listing refs
* Checking submodules
* Pushing submodules
* Pushing refs
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add trace2 regions to fetch-pack.c and builtins/fetch.c to better track
time spent in the various phases of a fetch:
* listing refs
* negotiation for protocol versions v0-v2
* fetching refs
* consuming refs
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit trace2_cmd_mode() messages for each commit-graph
sub-command.
The commit graph commands were in flux when trace2 was
making it's way to git. Now that we have enough sub-commands
in commit-graph, we can label the various modes within them.
Distinguishing between read, write and verify is a great
start.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A configuration variable tells "git fetch" to write the commit
graph after finishing.
* ds/commit-graph-on-fetch:
fetch: add fetch.writeCommitGraph config setting
"git rebase --autostash <upstream> <branch>", when <branch> is
different from the current branch, incorrectly moved the tip of the
current branch, which has been corrected.
* bw/rebase-autostash-keep-current-branch:
builtin/rebase.c: Remove pointless message
builtin/rebase.c: make sure the active branch isn't moved when autostashing
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
