There is no reason to keep the strbuf active long after its last use.
By releasing it as early as possible, resource management is simplified
and there is less worry about future changes resulting in a leak.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die_if_checked_out() is intended to check if the branch about to be
checked out is already checked out either in the main worktree or in a
linked worktree. However, if .git/worktrees directory does not exist,
then it never bothers checking the main worktree, even though the
specified branch might indeed be checked out there, which is fragile
behavior.
This hasn't been a problem in practice since the current implementation
of "git worktree add" (and, earlier, "git checkout --to") always creates
.git/worktrees before die_if_checked_out() is called by the child "git
checkout" invocation which populates the new worktree.
However, git-worktree will eventually want to call die_if_checked_out()
itself rather than only doing so indirectly as a side-effect of invoking
git-checkout, and reliance upon order of operations (creating
.git/worktrees before checking if a branch is already checked out) is
fragile. As a general function, callers should not be expected to abide
by this undocumented and unwarranted restriction. Therefore, make
die_if_checked_out() more robust by checking the main worktree whether
.git/worktrees exists or not.
While here, also move a comment explaining why die_if_checked_out()'s
helper parses HEAD manually. Such information resides more naturally
with the helper itself rather than at its first point of call.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkouts() doesn't just "check" linked checkouts for
"something"; specifically, it aborts the operation if the branch about
to be checked out is already checked out elsewhere. Therefore, rename it
to die_if_checked_out() to give a better indication of its function.
The more meaningful name will be particularly important when this
function is later published for use by other callers.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --ignore-other-worktree is specified, we unconditionally skip the
check to see if the requested branch is already checked out in a linked
worktree. Since we know that we will be skipping that check, there is no
need to resolve HEAD in order to detect other conditions under which we
may skip the check.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of df0b6cf (worktree: new place for "git prune --worktrees",
2015-06-29), linked worktree pruning functionality moved from
"git prune --worktrees" to "git worktree prune". Rename the
associated configuration variable accordingly.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
A line in the input to "rev-parse --parseopt" describes an option by
listing a short and/or long name, optional flags [*=?!], argument hint,
and then whitespace and help string.
We did not allow any of the [*=?!] characters in the argument hints.
The following input
pair=key=value equals sign in the hint
used to generate a help line like this:
--pair=key <value> equals sign in the hint
and used to expect "pair=key" as the argument name.
That is not very helpful as we generally do not want any of the [*=?!]
characters in the argument names. But we do want to use at least the
equals sign in the argument hints.
Update the parser to make long argument names stop at the first [*=?!]
character.
Add test case with equals sign in the argument hint and update the test
to perform all the operations in test_expect_success matching the
t/README requirements and allowing commands like
./t1502-rev-parse-parseopt.sh --run=1-2
to stop at the test case 2 without any further modification of the test
state area.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the "linked checkout" in 2.5.0-rc1.
Instead of "checkout --to" that does not do what "checkout"
normally does, move the functionality to "git worktree add".
* es/worktree-add: (24 commits)
Revert "checkout: retire --ignore-other-worktrees in favor of --force"
checkout: retire --ignore-other-worktrees in favor of --force
worktree: add: auto-vivify new branch when <branch> is omitted
worktree: add: make -b/-B default to HEAD when <branch> is omitted
worktree: extract basename computation to new function
checkout: require worktree unconditionally
checkout: retire --to option
tests: worktree: retrofit "checkout --to" tests for "worktree add"
worktree: add -b/-B options
worktree: add --detach option
worktree: add --force option
worktree: introduce "add" command
checkout: drop 'checkout_opts' dependency from prepare_linked_checkout
checkout: make --to unconditionally verbose
checkout: prepare_linked_checkout: drop now-unused 'new' argument
checkout: relocate --to's "no branch specified" check
checkout: fix bug with --to and relative HEAD
Documentation/git-worktree: add EXAMPLES section
Documentation/git-worktree: add high-level 'lock' overview
Documentation/git-worktree: split technical info from general description
...
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
This reverts commit 0d1a151783.
When trying to switch to a different branch, that happens to be
checked out in another working tree, the user shouldn't have to
give up the other safety measures (like protecting the local changes
that overlap the difference between the branches) while defeating
the "no two checkouts of the same branch" safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a safeguard, checking out a branch already checked out by a different
worktree is disallowed. This behavior can be overridden with
--ignore-other-worktrees, however, this option is neither obvious nor
particularly discoverable. As a common safeguard override, --force is
more likely to come to mind. Therefore, overload it to also suppress the
check for a branch already checked out elsewhere.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, when <branch> is omitted from "git worktree <path>
<branch>" and neither -b nor -B is used, automatically create a new
branch named after <path>, as if "-b $(basename <path>)" was specified.
Thus, "git worktree add ../hotfix" creates a new branch named "hotfix"
and associates it with new worktree "../hotfix".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, like "git branch" and "git checkout -b", make
"git worktree add -b <newbranch> <path> <branch>" default to HEAD when
<branch> is omitted.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will also need to compute the basename of the new
worktree, so factor out this logic into a new function.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to allow linked worktree creation via "git checkout --to" from
a bare repository, 3473ad0 (checkout: don't require a work tree when
checking out into a new one, 2014-11-30) dropped git-checkout's
unconditional NEED_WORK_TREE requirement and instead performed worktree
setup conditionally based upon presence or absence of the --to option.
Now that --to has been retired and git-checkout is no longer responsible
for linked worktree creation, the NEED_WORK_TREE requirement can be
re-instated.
This effectively reverts 3473ad0, except for the tests it added which
now check bare repository behavior of "git worktree add" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git worktree add" has achieved user-facing feature-parity with
"git checkout --to", retire the latter.
Move the actual linked worktree creation functionality,
prepare_linked_checkout() and its helpers, verbatim from checkout.c to
worktree.c.
This effectively reverts changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30) with the
exception of merge_working_tree() and switch_branches() which still
require specialized knowledge that a the checkout is occurring in a
newly-created linked worktree (signaled to them by the private
GIT_CHECKOUT_NEW_WORKTREE environment variable).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add -b/-B options to create a new
branch and check it out in the new worktree.
(For brevity, only -b is mentioned in the synopsis; -B is omitted.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add a --detach option to detach HEAD
in the new worktree.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, "git worktree add" refuses to create a new worktree when
the requested branch is already checked out elsewhere. Add a --force
option to override this safeguard.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add". As a first step, introduce a bare-bones git-worktree
"add" command along with documentation. At this stage, "git worktree
add" merely invokes "git checkout --to" behind the scenes, but an
upcoming patch will move the actual functionality
(checkout.c:prepare_linked_checkout() and its helpers) to worktree.c.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, worktree.c won't have access to the 'struct
checkout_opts' passed to prepare_linked_worktree(), which it consults
for the pathname of the new worktree and the argv[] of the command it
should run to populate the new worktree. Facilitate relocation of
prepare_linked_worktree() by instead having it accept the pathname and
argv[] directly, thus eliminating the final references to 'struct
checkout_opts'.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_linked_checkout() respects git-checkout's --quiet flag, however,
the plan is to relocate "git checkout --to" functionality to "git
worktree add", and git-worktree does not (yet) have a --quiet flag.
Consequently, make prepare_linked_checkout() unconditionally verbose to
ease eventual code movement to worktree.c.
(A --quiet flag can be added to git-worktree later if there is demand
for it.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only references to 'new' were folded out by the last two patches.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, this check expects a 'struct branch_info' which
git-worktree won't have at hand. It will, however, have access to its
own command-line from which it can pick up the branch name. Therefore,
as a preparatory step, rather than having prepare_linked_checkout()
perform this check, make it the caller's responsibility.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given "git checkout --to <path> HEAD~1", the new worktree's HEAD should
begin life at the current branch's HEAD~1, however, it actually ends up
at HEAD~2. This happens because:
1. git-checkout resolves HEAD~1
2. to satisfy is_git_directory(), prepare_linked_worktree() creates
a HEAD for the new worktree with the value of the resolved HEAD~1
3. git-checkout re-invokes itself with the same arguments within the
new worktree to populate the worktree
4. the sub git-checkout resolves HEAD~1 relative to its own HEAD,
which is the resolved HEAD~1 from the original invocation,
resulting unexpectedly and incorrectly in HEAD~2 (relative to the
original)
Fix this by unconditionally assigning the current worktree's HEAD as the
value of the new worktree's HEAD.
As a side-effect, this change also eliminates a dependence within
prepare_linked_checkout() upon 'struct branch_info'. The plan is to
eventually relocate "git checkout --to" functionality to "git worktree
add", and worktree.c won't have knowledge of 'struct branch_info', so
removal of this dependency is a step toward that goal.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c6458e60 (index-pack: kill union delta_base to save memory,
2015-04-18) attempted to reduce the memory footprint of index-pack,
one of the key thing it did was to keep track of ref-deltas and
ofs-deltas separately.
In fix_unresolved_deltas(), however it forgot that it now wants to
look only at ref deltas in one place. The code allocated an array
for nr_unresolved, which is sum of number of ref- and ofs-deltas
minus nr_resolved, which may be larger or smaller than the number
ref-deltas. Depending on nr_resolved, this was either under or over
allocating.
Also, the old code before this change had to use 'i' and 'n' because
some of the things we see in the (old) deltas[] array we scanned
with 'i' would not make it into the sorted_by_pos[] array in the old
world order, but now because you have only ref delta in a separate
ref_deltas[] array, they increment lock&step. We no longer need
separate variables. And most importantly, we shouldn't pass the
nr_unresolved parameter, as this number does not play a role in the
working of this helper function.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reachability bitmaps do not have enough information to
tell us which commits might have changed path "foo", so the
current code produces wrong answers for:
git rev-list --use-bitmap-index --count HEAD -- foo
(it silently ignores the "foo" limiter). Instead, we should
fall back to doing a normal traversal (it is OK to fall
back rather than complain, because --use-bitmap-index is a
pure optimization, and might not kick in for other reasons,
such as there being no bitmaps in the repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--count should be mentioned in the usage guide, this updates code and
documentation.
Signed-off-by: Lawrence Siebert <lawrencesiebert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feeds the format directly to strftime. Besides being a
little more flexible, the main advantage is that your system
strftime may know more about your locale's preferred format
(e.g., how to spell the days of the week).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more readable, and won't break if we ever change the
order of the date_mode enum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
The sorting we could probably live without, but printing
duplicates is just a hassle for the user, who must then
de-dup themselves (or risk a wrong answer if they are doing
something like counting objects with a particular property).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
"git apply" cannot diagnose a patch corruption when the breakage is
to mark the length of the hunk shorter than it really is on the
hunk header line "@@ -l,k +m,n @@"; one special case it could is
when the hunk becomes no-op (e.g. k == n == 2 for two-line context
patch output), and it learned how to do so.
* jc/apply-reject-noop-hunk:
apply: reject a hunk that does not do anything
Identical to support in `git receive-pack for the config option
`receive.fsck.skiplist`, we now support ignoring given objects in
`git fsck` via `fsck.skiplist` altogether.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option avoids unpacking each and all blob objects, and just
verifies the connectivity. In particular with large repositories, this
speeds up the operation, at the expense of missing corrupt blobs,
ignoring unreachable objects and other fsck issues, if any.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have support in `git receive-pack` to deal with some legacy
repositories which have non-fatal issues.
Let's make `git fsck` itself useful with such repositories, too, by
allowing users to ignore known issues, or at least demote those issues
to mere warnings.
Example: `git -c fsck.missingEmail=ignore fsck` would hide
problems with missing emails in author, committer and tagger lines.
In the same spirit that `git receive-pack`'s usage of the fsck machinery
differs from `git fsck`'s – some of the non-fatal warnings in `git fsck`
are fatal with `git receive-pack` when receive.fsckObjects = true, for
example – we strictly separate the fsck.<msg-id> from the
receive.fsck.<msg-id> settings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, missing emails in commit and tag objects can be demoted to
mere warnings with
git config receive.fsck.missingemail=warn
The value is actually a comma-separated list.
In case that the same key is listed in multiple receive.fsck.<msg-id>
lines in the config, the latter configuration wins (this can happen for
example when both $HOME/.gitconfig and .git/config contain message type
settings).
As git receive-pack does not actually perform the checks, it hands off
the setting to index-pack or unpack-objects in the form of an optional
argument to the --strict option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d95d728aba.
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
git add -N file
git diff --cached file | git apply --cached --whitespace=fix
git checkout file
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to examine all objects in the
repository. Normally this is done with "git rev-list --all
--objects", but:
1. That shows only reachable objects. You may want to look
at all available objects.
2. It's slow. We actually open each object to walk the
graph. If your operation is OK with seeing unreachable
objects, it's an order of magnitude faster to just
enumerate the loose directories and pack indices.
You can do this yourself using "ls" and "git show-index",
but it's non-obvious. This patch adds an option to
"cat-file --batch-check" to operate on all available
objects (rather than reading names from stdin).
This is based on a proposal by Charles Bailey to provide a
separate "git list-all-objects" command. That is more
orthogonal, as it splits enumerating the objects from
getting information about them. However, in practice you
will either:
a. Feed the list of objects directly into cat-file anyway,
so you can find out information about them. Keeping it
in a single process is more efficient.
b. Ask the listing process to start telling you more
information about the objects, in which case you will
reinvent cat-file's batch-check formatter.
Adding a cat-file option is simple and efficient. And if you
really do want just the object names, you can always do:
git cat-file --batch-check='%(objectname)' --batch-all-objects
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are really two things going on in this function:
1. We convert the name we got on stdin to a sha1.
2. We look up and print information on the sha1.
Let's split out the second half so that we can call it
separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If batch_one_object returns an error code, we stop reading
input. However, it will only do so if we feed it NULL,
which cannot happen; we give it the "buf" member of a
strbuf, which is always non-NULL.
We did originally stop on other errors (like a missing
object), but this was changed in 3c076db (cat-file --batch /
--batch-check: do not exit if hashes are missing,
2008-06-09). These days we keep going for any per-object
error (and print "missing" when necessary).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a direct write() to output the results of --batch and
--batch-check. This is good for processes feeding the input
and reading the output interactively, but it introduces
measurable overhead if you do not want this feature. For
example, on linux.git:
$ git rev-list --objects --all | cut -d' ' -f1 >objects
$ time git cat-file --batch-check='%(objectsize)' \
<objects >/dev/null
real 0m5.440s
user 0m5.060s
sys 0m0.384s
This patch adds an option to use regular stdio buffering:
$ time git cat-file --batch-check='%(objectsize)' \
--buffer <objects >/dev/null
real 0m4.975s
user 0m4.888s
sys 0m0.092s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not put extra whitespace before the first macro
argument.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag by default displays human-readable output on standard error.
However, it can also be useful to get access to the raw gpg status
information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make verify-tag
produce the gpg status information on standard error instead of the
human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit by default displays human-readable output on standard
error. However, it can also be useful to get access to the raw gpg
status information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make
verify-commit produce the gpg status information on standard error
instead of the human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to handle printing of signature data from a struct
signature_check is very similar between verify-commit and verify-tag.
Place this in a single function. verify-tag retains its special case
behavior of printing the tag even when no valid signature is found.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit and verify-tag both share a central codepath for verifying
commits: check_signature. However, verify-tag exited successfully for
untrusted signature, while verify-commit exited unsuccessfully.
Centralize this signature check and make verify-commit adopt the older
verify-tag behavior. This behavior is more logical anyway, as the
signature is in fact valid, whether or not there's a path of trust to
the author.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag was executing an entirely different codepath than
verify-commit, except for the underlying verify_signed_buffer. Move
much of the code from check_commit_signature to a generic
check_signature function and adjust both codepaths to call it.
Update verify-tag to explicitly output the signature text, as we now
call verify_signed_buffer with strbufs to catch the output, which
prevents it from being printed automatically.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_transaction_update() family of functions use the following
convention for their old_sha1 parameters:
* old_sha1 == NULL: Don't check the old value at all.
* is_null_sha1(old_sha1): Ensure that the reference didn't exist
before the transaction.
* otherwise: Ensure that the reference had the specified value before
the transaction.
delete_ref() had a different convention, namely treating
is_null_sha1(old_sha1) as "don't care". Change it to adhere to the
standard convention to reduce the scope for confusion.
Please note that it is now a bug to pass old_sha1=NULL_SHA1 to
delete_ref() (because it doesn't make sense to delete a reference that
you already know doesn't exist). This is consistent with the behavior
of ref_transaction_delete().
Most of the callers of delete_ref() never pass old_sha1=NULL_SHA1 to
delete_ref(), and are therefore unaffected by this change. The
two exceptions are:
* The call in cmd_update_ref(), which passed NULL_SHA1 if the old
value passed in on the command line was 0{40} or the empty string.
Change that caller to pass NULL in those cases.
Arguably, it should be an error to call "update-ref -d" with the old
value set to "does not exist", just as it is for the `--stdin`
command "delete". But since this usage was accepted until now,
continue to accept it.
* The call in delete_branches(), which could pass NULL_SHA1 if
deleting a broken or symbolic ref. Change it to pass NULL in these
cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure the code to avoid clearing oldsha1 when oldval is unset.
It's value is not needed in that case, so this change makes it more
obvious that its initialization is consistent with its later use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that this function does not overwrite its first
argument.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" uses shortcuts when creating the initial set of
references:
* It writes them directly to packed-refs.
* It doesn't lock the individual references (though it does lock the
packed-refs file).
* It doesn't check for refname conflicts between two new references or
between one new reference and any hypothetical old ones.
* It doesn't create reflog entries for the reference creations.
This functionality was implemented in builtin/clone.c. But really that
file shouldn't have such intimate knowledge of how references are
stored. So provide a new function in the refs API,
initial_ref_transaction_commit(), which can be used for initial
reference creation. The new function is based on the ref_transaction
interface.
This means that we can make some other functions private to the refs
module. That will be done in a followup commit.
It would seem to make sense to add a test here that there are no
existing references, because that is how the function *should* be
used. But in fact, the "testgit" remote helper appears to call it
*after* having set up refs/remotes/<name>/HEAD and
refs/remotes/<name>/master, so we can't be so strict. For now, the
function trusts its caller to only call it when it makes sense. Future
commits will add some more limited sanity checks.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version just looped over the references to delete, calling
delete_ref() on each one. But that has quadratic behavior, because
each call to delete_ref() might have to rewrite the packed-refs file.
This can be very expensive in a repository with a large number of
references. In some (admittedly extreme) repositories, we've seen
cases where the ref-pruning part of fetch takes multiple tens of
minutes.
Instead call delete_refs(), which (aside from being less code) has the
optimization that it only rewrites the packed-refs file a single time.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This slightly changes how errors are reported. The old and new code
both report errors that come from repack_without_refs() the same way.
But if an error occurs within delete_ref(), the old version only
emitted an error within delete_ref() without further comment. The new
version (in delete_refs()) still emits that error, but then follows it
up with
error(_("could not remove reference %s"), refname)
The "could not remove reference" error originally came from a similar
message in remove_branches() (from builtin/remote.c).
This is an improvement, because the error from delete_ref() (which
usually comes from ref_transaction_commit()) can be pretty low-level,
like
Cannot lock ref '%s': unable to resolve reference %s: %s
where the last "%s" is the original strerror.
In any case, I don't think we need to sweat the details too much,
because these errors should only ever be seen in the case of a broken
repository or a race between two processes; i.e., only in pretty rare
and anomalous situations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the function remove_branches() from builtin/remote.c to refs.c,
rename it to delete_refs(), and make it public.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of specifying whether a message by the fsck machinery constitutes
an error or a warning, let's specify an identifier relating to the
concrete problem that was encountered. This is necessary for upcoming
support to be able to demote certain errors to warnings.
In the process, simplify the requirements on the calling code: instead of
having to handle full-blown varargs in every callback, we now send a
string buffer ready to be used by the callback.
We could use a simple enum for the message IDs here, but we want to
guarantee that the enum values are associated with the appropriate
message types (i.e. error or warning?). Besides, we want to introduce a
parser in the next commit that maps the string representation to the
enum value, hence we use the slightly ugly preprocessor construct that
is extensible for use with said parser.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the diff machinery, we are about to introduce more settings,
therefore it makes sense to carry them around as a (pointer to a) struct
containing all of them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-pull.sh to C, we introduced a
redirection to git-pull.sh if the environment variable
_GIT_USE_BUILTIN_PULL was not defined in order to not break test scripts
that relied on a functional git-pull.
Now that all of git-pull's functionality has been re-implemented in
builtin/pull.c, remove this redirection, and retire the old git-pull.sh
into contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the error messages printed by die_no_merge_candidates() to take
into account that we may be "rebasing against" rather than "merging
with".
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-implement the behavior introduced by f9189cf (pull --rebase: exit
early when the working directory is dirty, 2008-05-21).
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd67e4d (Teach 'git pull' about --rebase, 2007-11-28),
fetch+rebase could be set by default by defining the config variable
branch.<name>.rebase. This setting can be overriden on the command line
by --rebase and --no-rebase.
Since 6b37dff (pull: introduce a pull.rebase option to enable --rebase,
2011-11-06), git-pull --rebase can also be configured via the
pull.rebase configuration option.
Re-implement support for these two configuration settings by introducing
config_get_rebase() which is called before parse_options() to set the
default value of opt_rebase.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd67e4d (Teach 'git pull' about --rebase, 2007-11-28), if the
--rebase option is set, git-rebase is run instead of git-merge.
Re-implement this by introducing run_rebase(), which is called instead
of run_merge() if opt_rebase is a true value.
Since c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), git-pull handles the case where the upstream
branch was rebased since it was last fetched. The fork point (old remote
ref) of the branch from the upstream branch is calculated before fetch,
and then rebased from onto the new remote head (merge_head) after fetch.
Re-implement this by introducing get_merge_branch_2() and
get_merge_branch_1() to find the upstream branch for the
specified/current branch, and get_rebase_fork_point() which will find
the fork point between the upstream branch and current branch.
However, the above change created a problem where git-rebase cannot
detect commits that are already upstream, and thus may result in
unnecessary conflicts. cf65426 (pull --rebase: Avoid spurious conflicts
and reapplying unnecessary patches, 2010-08-12) fixes this by ignoring
the above old remote ref if it is contained within the merge base of the
merge head and the current branch.
This is re-implemented in run_rebase() where fork_point is not used if
it is the merge base returned by get_octopus_merge_base().
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f947413 (Use GIT_REFLOG_ACTION environment variable instead.,
2006-12-28) established git-pull's method for setting the reflog
message, which is to set the environment variable GIT_REFLOG_ACTION to
the evaluation of "pull${1+ $*}" if it has not already been set.
Re-implement this behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b4dc085 (pull: merge into unborn by fast-forwarding from empty
tree, 2013-06-20) established git-pull's current behavior of pulling
into an unborn branch by fast-forwarding the work tree from an empty
tree to the merge head, then setting HEAD to the merge head.
Re-implement this behavior by introducing pull_into_void() which will be
called instead of run_merge() if HEAD is invalid.
Helped-by: Stephen Robin <stephen.robin@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b10ac50 (Fix pulling into the same branch., 2005-08-25), git-pull,
upon detecting that git-fetch updated the current head, will
fast-forward the working tree to the updated head commit.
Re-implement this behavior.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d38a30d (Be more user-friendly when refusing to do something
because of conflict., 2010-01-12), git-pull will error out with
user-friendly advices if the user is in the middle of a merge or has
unmerged files.
Re-implement this behavior. While the "has unmerged files" case can be
handled by die_resolve_conflict(), we introduce a new function
die_conclude_merge() for printing a different error message for when
there are no unmerged files but the merge has not been finished.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), git-pull.sh
would lookup the configuration value of "pull.ff", and set the flag
"--ff" if its value is "true", "--no-ff" if its value is "false" and
"--ff-only" if its value is "only".
Re-implement this behavior.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a8c9bef (pull: improve advice for unconfigured error case,
2009-10-05) fully established the current advices given by git-pull for
the different cases where git-fetch will not have anything marked for
merge:
1. We fetched from a specific remote, and a refspec was given, but it
ended up not fetching anything. This is usually because the user
provided a wildcard refspec which had no matches on the remote end.
2. We fetched from a non-default remote, but didn't specify a branch to
merge. We can't use the configured one because it applies to the
default remote, and thus the user must specify the branches to merge.
3. We fetched from the branch's or repo's default remote, but:
a. We are not on a branch, so there will never be a configured branch
to merge with.
b. We are on a branch, but there is no configured branch to merge
with.
4. We fetched from the branch's or repo's default remote, but the
configured branch to merge didn't get fetched (either it doesn't
exist, or wasn't part of the configured fetch refspec)
Re-implement the above behavior by implementing get_merge_heads() to
parse the heads in FETCH_HEAD for merging, and implementing
die_no_merge_candidates(), which will be called when FETCH_HEAD has no
heads for merging.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since eb2a8d9 (pull: handle git-fetch's options as well, 2015-06-02),
git-pull knows about and handles git-fetch's options, passing them to
git-fetch. Re-implement this behavior.
Since 29609e6 (pull: do nothing on --dry-run, 2010-05-25) git-pull
supported the --dry-run option, exiting after git-fetch if --dry-run is
set. Re-implement this behavior.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
"git clean pathspec..." tried to lstat(2) and complain even for
paths outside the given pathspec.
* dt/clean-pathspec-filter-then-lstat:
clean: only lstat files in pathspec
An earlier optimization broke index-pack for a large object
transfer; this fixes it before the breakage hits any released
version.
* nd/slim-index-pack-memory-usage:
index-pack: fix truncation of off_t in comparison
"git clean" uses resolve_gitlink_ref() to check for the presence of
nested git repositories, but it has the drawback of creating a
ref_cache entry for every directory that should potentially be
cleaned. The linear search through the ref_cache list causes a massive
performance hit for large number of directories.
Modify clean.c:remove_dirs to use setup.c:is_git_directory and
setup.c:read_gitfile_gently instead.
Both these functions will open files and parse contents when they find
something that looks like a git repository. This is ok from a
performance standpoint since finding repository candidates should be
comparatively rare.
Using is_git_directory and read_gitfile_gently should give a more
standardized check for what is and what isn't a git repository but
also gives three behavioral changes.
The first change is that we will now detect and avoid cleaning empty
nested git repositories (only init run). This is desirable.
Second, we will no longer die when cleaning a file named ".git" with
garbage content (it will be cleaned instead). This is also desirable.
The last change is that we will detect and avoid cleaning empty bare
repositories that have been placed in a directory named ".git". This
is not desirable but should have no real user impact since we already
fail to clean non-empty bare repositories in the same scenario. This
is thus deemed acceptable.
On top of this we add some extra precautions. If read_gitfile_gently
fails to open the git file, read the git file or verify the path in
the git file we assume that the path with the git file is a valid
repository and avoid cleaning.
Update t7300 to reflect these changes in behavior.
The time to clean an untracked directory containing 100000 sub
directories went from 61s to 1.7s after this change.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify git-merge's options in the option list, and pass any specified
options to git-merge.
These options are:
* -n, --stat, --summary: since d8abe14 (merge, pull: introduce
'--(no-)stat' option, 2008-04-06)
* --log: since efb779f (merge, pull: add '--(no-)log' command line
option, 2008-04-06)
* --squash: since 7d0c688 (git-merge --squash, 2006-06-23)
* --commit: since 5072a32 (Teach git-pull about --[no-]ff, --no-squash
and --commit, 2007-10-29)
* --edit: since 8580830 ("git pull" doesn't know "--edit", 2012-02-11)
* --ff, --ff-only: since 5072a32 (Teach git-pull about --[no-]ff,
--no-squash and --commit, 2007-10-29)
* --verify-signatures: since efed002 (merge/pull: verify GPG signatures
of commits being merged, 2013-03-31)
* -s, --strategy: since 60fb5b2 (Use git-merge in git-pull (second
try)., 2005-09-25)
* -X, --strategy-option: since ee2c795 (Teach git-pull to pass
-X<option> to git-merge, 2009-11-25)
* -S, --gpg-sign: since ea230d8 (pull: add the --gpg-sign option.,
2014-02-10)
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7f87aff (Teach/Fix pull/fetch -q/-v options, 2008-11-15) taught git-pull
to accept the verbosity -v and -q options and pass them to git-fetch and
git-merge.
Re-implement support for the verbosity flags by adding it to the options
list and introducing argv_push_verbosity() to push the flags into the
argv array used to execute git-fetch and git-merge.
9839018 (fetch and pull: learn --progress, 2010-02-24) and bebd2fd
(pull: propagate --progress to merge, 2011-02-20) taught git-pull to
accept the --progress option and pass it to git-fetch and git-merge.
Use OPT_PASSTHRU() implemented earlier to pass the "--[no-]progress"
command line options to git-fetch and git-merge.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the fetch + merge functionality of git-pull, by first running
git-fetch with the repo and refspecs provided on the command line, then
running git-merge on FETCH_HEAD to merge the fetched refs into the
current branch.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-pull.sh into a C builtin, implement a
skeletal builtin/pull.c that redirects to $GIT_EXEC_PATH/git-pull.sh if
the environment variable _GIT_USE_BUILTIN_PULL is not defined. This
allows us to fall back on the functional git-pull.sh when running the
test suite for tests that depend on a working git-pull implementation.
This redirection should be removed when all the features of git-pull.sh
have been re-implemented in builtin/pull.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is step one of creating a common library for 'for-each-ref',
'branch -l' and 'tag -l'. This creates a header file with the
functions and data structures that ref-filter will provide.
We move the data structures created in for-each-ref to this header
file.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename all the variables called sort to sorting to match the
function/structure name changes made in the previous patch.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename some of the functions and make them publicly available.
This is a preparatory step for moving code from 'for-each-ref'
to 'ref-filter' to make meaningful, targeted services available to
other commands via public APIs.
Functions renamed are:
parse_atom() -> parse_ref_filter_atom()
verify_format() -> verify_ref_format()
get_value() -> get_ref_atom_value()
grab_single_ref() -> ref_filter_handler()
sort_refs() -> ref_array_sort()
show_ref() -> show_ref_array_item()
default_sort() -> ref_default_sorting()
opt_parse_sort() -> parse_opt_ref_sorting()
cmp_ref_sort() -> cmp_ref_sorting()
Rename 'struct ref_sort' to 'struct ref_sorting' in this context.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and implement 'ref_array_clear()' which will free
all allocated memory for 'ref_array'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce 'ref_filter_cbdata' which will hold 'ref_filter'
(conditions to filter the refs on) and 'ref_array' (the array
of ref_array_items). Modify the code to use these new structures.
This is a preparatory patch to eventually move code from 'for-each-ref'
to 'ref-filter' and make it publicly available.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename 'refinfo' to 'ref_array_item' as a preparatory step for
introduction of new structures in the forthcoming patch.
Re-order the fields in 'ref_array_item' so that refname can be
eventually converted to a FLEX_ARRAY.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'grab_single_ref()' remove the extra count variable 'cnt' and
use the variable 'grab_cnt' of structure 'grab_ref_cbdata' directly
instead.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract two helper functions out of grab_single_ref(). Firstly,
new_refinfo() which is used to allocate memory for a new refinfo
structure and copy the objectname, refname and flag to it.
Secondly, match_name_as_path() which when given an array of patterns
and the refname checks if the refname matches any of the patterns
given while the pattern is a pathname, also supports wildcard
characters.
This is a preperatory patch for restructuring 'for-each-ref' and
eventually moving most of it to 'ref-filter' to provide the
functionality to similar commands via public API's.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to have grafts or replace refs for specific use-cases while
keeping the default "view" of the repository pristine (or with a different
set of grafts/replace refs).
It is possible to use a different graft file with GIT_GRAFT_FILE, but while
replace refs are more powerful, they don't have an equivalent override.
Add a GIT_REPLACE_REF_BASE environment variable to control where git is
going to look for replace refs.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --patch or pathspecs are passed to git checkout, the working tree
will not be switching branch, so there's no need to check if the branch
that we are running checkout on is already checked out.
Original-patch-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 45e8a74 (has_sha1_file: re-check pack directory before
giving up, 2013-08-30), we spend extra effort for
has_sha1_file to give the right answer when somebody else is
repacking. Usually this effort does not matter, because
after finding that the object does not exist, the next step
is usually to die().
However, some code paths make a large number of
has_sha1_file checks which are _not_ expected to return 1.
The collision test in index-pack.c is such a case. On a
local system, this can cause a performance slowdown of
around 5%. But on a system with high-latency system calls
(like NFS), it can be much worse.
This patch introduces a "quick" flag to has_sha1_file which
callers can use when they would prefer high performance at
the cost of false negatives during repacks. There may be
other code paths that can use this, but the index-pack one
is the most obviously critical, so we'll start with
switching that one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if a reflog entry's old or new SHA-1 was not resolvable to
an object, that SHA-1 was silently ignored. Instead, report such cases
as errors.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New function, extracted from fsck_handle_reflog_ent(). The extra
is_null_sha1() test for the new reference is currently unnecessary, as
reflogs are deleted when the reference itself is deleted. But it
doesn't hurt, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
Commit c6458e6 (index-pack: kill union delta_base to save
memory, 2015-04-18) refactored the comparison functions used
in sorting and binary searching our delta list. The
resulting code does something like:
int cmp_offsets(off_t a, off_t b)
{
return a - b;
}
This works most of the time, but produces nonsensical
results when the difference between the two offsets is
larger than what can be stored in an "int". This can lead to
unresolved deltas if the packsize is larger than 2G (even on
64-bit systems, an int is still typically 32 bits):
$ git clone git://github.com/mozilla/gecko-dev
Cloning into 'gecko-dev'...
remote: Counting objects: 4800161, done.
remote: Compressing objects: 100% (178/178), done.
remote: Total 4800161 (delta 88), reused 0 (delta 0), pack-reused 4799978
Receiving objects: 100% (4800161/4800161), 2.21 GiB | 3.26 MiB/s, done.
Resolving deltas: 99% (3808820/3811944), completed with 0 local objects.
fatal: pack has 3124 unresolved deltas
fatal: index-pack failed
We can fix it by doing direct comparisons between the
offsets and returning constants; the callers only care about
the sign of the comparison, not the magnitude.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a loose reference file with invalid contents, "git
for-each-ref" incorrectly reports the problem as being a missing
object with name NULL_SHA1:
$ echo '12345678' >.git/refs/heads/nonsense
$ git for-each-ref
fatal: missing object 0000000000000000000000000000000000000000 for refs/heads/nonsense
With an explicit "--format" string, it can even report that the
reference validly points at NULL_SHA1:
$ git for-each-ref --format='%(objectname) %(refname)'
0000000000000000000000000000000000000000 refs/heads/nonsense
$ echo $?
0
This has been broken since
b7dd2d2 for-each-ref: Do not lookup objects when they will not be used (2009-05-27)
, which changed for-each-ref from using for_each_ref() to using
git_for_each_rawref() in order to avoid looking up the referred-to
objects unnecessarily. (When "git for-each-ref" is given a "--format"
string that doesn't include information about the pointed-to object,
it does not look up the object at all, which makes it considerably
faster. Iterating with DO_FOR_EACH_INCLUDE_BROKEN is essential to this
optimization because otherwise for_each_ref() would itself need to
check whether the object exists as part of its brokenness test.)
But for_each_rawref() includes broken references in the iteration, and
"git for-each-ref" doesn't itself reject references with REF_ISBROKEN.
The result is that broken references are processed *as if* they had
the value NULL_SHA1, which is the value stored in entries for broken
references.
Change "git for-each-ref" to emit warnings for references that are
REF_ISBROKEN but to otherwise skip them.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --ignore-if-in-upstream A..B", when either A or B
is a tag, failed miserably.
This is because the code passes the tips it used for traversal to
clear_commit_marks(), after running a temporary revision traversal
to enumerate the commits on both branches to find if they have
commits that make equivalent changes. The revision traversal
machinery knows how to enumerate commits reachable starting from a
tag, but clear_commit_marks() wants to take nothing but a commit.
In the longer term, it might be a more correct fix to teach
clear_commit_marks() to do the same "committish to commit"
dereferencing that is done in the revision traversal machinery,
but for now this fix should suffice.
Reported-by: Bruce Korb <bruce.korb@gmail.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complement existing --show-email option with fallback
configuration variable, with tests.
Signed-off-by: Quentin Neill <quentin.neill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch(-check)" learned the "--follow-symlinks"
option that follows an in-tree symbolic link when asked about an
object via extended SHA-1 syntax, e.g. HEAD:RelNotes that points at
Documentation/RelNotes/2.5.0.txt. With the new option, the command
behaves as if HEAD:Documentation/RelNotes/2.5.0.txt was given as
input instead.
* dt/cat-file-follow-symlinks:
cat-file: add --follow-symlinks to --batch
sha1_name: get_sha1_with_context learns to follow symlinks
tree-walk: learn get_tree_entry_follow_symlinks
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
"git clean pathspec..." tried to lstat(2) and complain even for
paths outside the given pathspec.
* dt/clean-pathspec-filter-then-lstat:
clean: only lstat files in pathspec
A hunk like this in a hand-edited patch without correctly adjusting
the line counts:
@@ -660,2 +660,2 @@ inline struct sk_buff *ieee80211_authentic...
auth = (struct ieee80211_authentication *)
skb_put(skb, sizeof(struct ieee80211_authentication));
- some old text
+ some new text
--
2.1.0
dev mailing list
at the end of the input does not have a good way for us to diagnose
it as a corrupt patch. We just read two context lines and discard
the remainder as cruft, which we must do in order to ignore the
e-mail footer. Notice that the patch does not change anything and
signal an error.
Note that this fix will not help if the hand-edited hunk header were
"@@ -660,3, +660,2" to include the removal. We would just remove
the old text without adding the new one, and treat "+ some new text"
and everything after that line as trailing cruft. So it is dubious
that this patch alone would help very much in practice, but it may
be better than nothing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options are intimately related, so it makes sense to
list them nearby in the "-h" output (they are already
adjacent in the manpage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only does this save us having to implement a custom
callback, but it handles "--no-reference" in the usual way
(to clear the list).
The generic callback does copy the string, which we don't
technically need, but that should not hurt anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to convert the SHA-1 to hexadecimal before printing it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They were never used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite to take an object_id argument and convert the local variable
"peeled" object_id.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Just as we have "%(upstream)" to report the "@{upstream}"
for each ref, this patch adds "%(push)" to match "@{push}".
It supports the same tracking format modifiers as upstream
(because you may want to know, for example, which branches
have commits to push).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us having to maintain a magic number to skip past
the matched prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create each branch struct, we fill in the
"remote_name" field from the config, and then fill in the
actual "remote" field (with a "struct remote") based on that
name. However, it turns out that nobody really cares about
the latter field. The only two sites that access it at all
are:
1. git-merge, which uses it to notice when the branch does
not have a remote defined. But we can easily replace this
with looking at remote_name instead.
2. remote.c itself, when setting up the @{upstream} merge
config. But we don't need to save the "remote" in the
"struct branch" for that; we can just look it up for
the duration of the operation.
So there is no need to have both fields; they are redundant
with each other (the struct remote contains the name, or you
can look up the struct from the name). It would be nice to
simplify this, especially as we are going to add matching
pushremote config in a future patch (and it would be nice to
keep them consistent).
So which one do we keep and which one do we get rid of?
If we had a lot of callers accessing the struct, it would be
more efficient to keep it (since you have to do a lookup to
go from the name to the struct, but not vice versa). But we
don't have a lot of callers; we have exactly one, so
efficiency doesn't matter. We can decide this based on
simplicity and readability.
And the meaning of the struct value is somewhat unclear. Is
it always the remote matching remote_name? If remote_name is
NULL (i.e., no per-branch config), does the struct fall back
to the "origin" remote, or is it also NULL? These questions
will get even more tricky with pushremotes, whose fallback
behavior is more complicated. So let's just store the name,
which pretty clearly represents the branch.*.remote config.
Any lookup or fallback behavior can then be implemented in
helper functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call file_exists() instead of open-coding it. That's shorter, simpler
and the intent becomes clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This wires the in-repo-symlink following code through to the cat-file
builtin. In the event of an out-of-repo link, cat-file will print
the link in a new format.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
"git merge FETCH_HEAD" learned that the previous "git fetch" could
be to create an Octopus merge, i.e. recording multiple branches
that are not marked as "not-for-merge"; this allows us to lose an
old style invocation "git merge <msg> HEAD $commits..." in the
implementation of "git pull" script; the old style syntax can now
be deprecated.
* jc/merge:
merge: deprecate 'git merge <message> HEAD <commit>' syntax
merge: handle FETCH_HEAD internally
merge: decide if we auto-generate the message early in collect_parents()
merge: make collect_parents() auto-generate the merge message
merge: extract prepare_merge_message() logic out
merge: narrow scope of merge_names
merge: split reduce_parents() out of collect_parents()
merge: clarify collect_parents() logic
merge: small leakfix and code simplification
merge: do not check argc to determine number of remote heads
merge: clarify "pulling into void" special case
t5520: test pulling an octopus into an unborn branch
t5520: style fixes
merge: simplify code flow
merge: test the top-level merge driver
After "git add -N", the path appeared in output of "git diff HEAD"
and "git diff --cached HEAD", leading "git status" to classify it
as "Changes to be committed". Such a path, however, is not yet to
be scheduled to be committed. "git diff" showed the change to the
path as modification, not as a "new file", in the header of its
output.
Treat such paths as "yet to be added to the index but Git already
know about them"; "git diff HEAD" and "git diff --cached HEAD"
should not talk about them, and "git diff" should show them as new
files yet to be added to the index.
* nd/diff-i-t-a:
diff-lib.c: adjust position of i-t-a entries in diff
Commit 2879bc3 made the progress and verbosity options sent to remote helper
earlier than they previously were. But nothing else after that would send
updates if the value is changed later on with transport_set_verbosity.
While for fetch and push, transport_set_verbosity is the first thing that
is done after creating the transport, it was not the case for clone. So
commit 2879bc3 broke changing progress and verbosity for clone, for urls
requiring a remote helper only (so, not git:// urls, for instance).
Moving transport_set_verbosity to just after the transport is created
works around the issue.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git clean" takes pathspec to limit the part of the
working tree to be cleaned, it checked the paths it encounters
during its directory traversal with lstat(2), before checking if
the path is within the pathspec.
Ignore paths outside pathspec and proceed without checking with
lstat(2). Even if such a path is unreadable due to e.g. EPERM,
"git clean" should not care.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
When running "add -e", if launching the editor fails, we do
not notice and continue as if the output is what the user
asked for. The likely case is that the editor did not touch
the contents at all, and we end up adding everything.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
Some error messages in "git config" were emitted without calling
the usual error() facility.
* jn/clean-use-error-not-fprintf-on-stderr:
config: use error() instead of fprintf(stderr, ...)
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
Memory usage of "git index-pack" has been trimmed by tens of
per-cent.
* nd/slim-index-pack-memory-usage:
index-pack: kill union delta_base to save memory
index-pack: reduce object_entry size to save memory
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
The `verify` and `create` subcommands of the bundle builtin do
not properly verify the command line arguments that have been
passed in. While the `verify` subcommand accepts an arbitrary
amount of ignored arguments the `create` subcommand does not
complain about being passed too few arguments, resulting in a
bogus call to `git rev-list`. Fix these errors by verifying that
the correct amount of arguments has been passed in.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git cat-file' throws an error while trying to print the type or
size of a broken/corrupt object. This is because these objects are
usually of unknown types.
Teach git cat-file a '--allow-unknown-type' option where it prints
the type or size of a broken/corrupt object without throwing
an error.
Modify '-t' and '-s' options to call sha1_object_info_extended()
directly to support the '--allow-unknown-type' option.
Add documentation for 'cat-file --allow-unknown-type'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
cat-file: add documentation for '--allow-unknown-type' option.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only parse the options if 2 or 3 arguments are specified.
Update 'struct option options[]' to use OPT_CMDMODE rather than
OPT_SET_INT to allow only one mutually exclusive option and avoid the
need for checking number of arguments. This was written by Junio C Hamano,
tested by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -r -d" mentions "delete remote branch", which should be
"remote-tracking branch".
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines two distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
"git show-branch --topics HEAD" (with no other arguments) did not
do anything interesting. Instead, contrast the given revision
against all the local branches by default.
* mh/show-branch-topic:
show-branch: show all local heads when only giving one rev along --topics
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
As of d089ebaa (setup: sanitize absolute and funny paths in
get_pathspec(), 2008-01-28), prefix_path() always returns a
newly allocated string, so callers should free its result.
Additionally, drop the const from variables to which the result of
the prefix_path() is assigned, so they can be free()'d without
having to cast-away the constness.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"hash-object" learned in 5ba9a93 (hash-object: add --literally
option, 2014-09-11) to allow crafting a corrupt/broken object of
unknown type.
When the user-provided type is particularly long, however, it can
overflow the relatively small stack-based character array handed to
write_sha1_file_prepare() by hash_sha1_file() and write_sha1_file(),
leading to stack corruption (and crash). Introduce a custom helper
to allow arbitrarily long typenames just for "hash-object --literally".
[jc: Eric's original used a strbuf in the more common codepaths, and
I rewrote it to avoid penalizing the non-literally code. Bugs are mine]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() / error() / warning() helpers put a fatal: / error: /
warning: prefix in front of the error message they print describing
the message's severity, which users are likely to be accustomed to
seeing these days.
This change will also be useful when marking the message for
translation: the argument to error() includes no newline at the end,
so it is less fussy for translators to translate without lines running
together in the translated output.
While we're here, start the error messages with a lowercase letter to
match the usual typography of error messages.
A quick web search and a code search at codesearch.debian.net finds no
scripts trying to parse these error messages, so this change should be
safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 9c9b4f2f (standardize usage info string format, 2015-01-13)
tried to make usage-string in line with the documentation by
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
but it missed a few places.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical setup under Windows is to set core.eol to CRLF, and text
files are marked as "text" in .gitattributes, or core.autocrlf is
set to true.
After 4d4813a5 "git blame" no longer works as expected for such a
set-up. Every line is annotated as "Not Committed Yet", even though
the working directory is clean. This is because the commit removed
the conversion in blame.c for all files, with or without CRLF in the
repo.
Having files with CRLF in the repo and core.autocrlf=input is a
temporary situation, and the files, if committed as is, will be
normalized in the repo, which _will_ be a notable change. Blaming
them with "Not Committed Yet" is the right result. Revert commit
4d4813a5 which was a misguided attempt to "solve" a non-problem.
Add two test cases in t8003 to verify the correct CRLF conversion.
Suggested-By: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had this in "git merge" manual for eternity:
'git merge' <msg> HEAD <commit>...
[This] syntax (<msg> `HEAD` <commit>...) is supported for
historical reasons. Do not use it from the command line or in
new scripts. It is the same as `git merge -m <msg> <commit>...`.
With the update to "git merge" to make it understand what is
recorded in FETCH_HEAD directly, including Octopus merge cases, we
now can rewrite the use of this syntax in "git pull" with a simple
"git merge FETCH_HEAD".
Also there are quite a few fallouts in the test scripts, and it
turns out that "git cvsimport" also uses this old syntax to record
a merge.
Judging from this result, I would not be surprised if dropping the
support of the old syntax broke scripts people have written and been
relying on for the past ten years. But at least we can start the
deprecation process by throwing a warning message when the syntax is
used.
With luck, we might be able to drop the support in a few years.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The collect_parents() function now is responsible for
1. parsing the commits given on the command line into a list of
commits to be merged;
2. filtering these parents into independent ones; and
3. optionally calling fmt_merge_msg() via prepare_merge_message()
to prepare an auto-generated merge log message, using fake
contents that FETCH_HEAD would have had if these commits were
fetched from the current repository with "git pull . $args..."
Make "git merge FETCH_HEAD" to be the same as the traditional
git merge "$(git fmt-merge-msg <.git/FETCH_HEAD)" $commits
invocation of the command in "git pull", where $commits are the ones
that appear in FETCH_HEAD that are not marked as not-for-merge, by
making it do a bit more, specifically:
- noticing "FETCH_HEAD" is the only "commit" on the command line
and picking the commits that are not marked as not-for-merge as
the list of commits to be merged (substitute for step #1 above);
- letting the resulting list fed to step #2 above;
- doing the step #3 above, using the contents of the FETCH_HEAD
instead of fake contents crafted from the list of commits parsed
in the step #1 above.
Note that this changes the semantics. "git merge FETCH_HEAD" has
always behaved as if the first commit in the FETCH_HEAD file were
directly specified on the command line, creating a two-way merge
whose auto-generated merge log said "merge commit xyz". With this
change, if the previous fetch was to grab multiple branches (e.g.
"git fetch $there topic-a topic-b"), the new world order is to
create an octopus, behaving as if "git pull $there topic-a topic-b"
were run. This is a deliberate change to make that happen, and
can be seen in the changes to t3033 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to pass the list of parents to fmt_merge_msg(), cmd_merge()
uses this strbuf to create something that look like FETCH_HEAD that
describes commits that are being merged. This is necessary only
when we are creating the merge commit message ourselves, but was
done unconditionally.
Move the variable and the logic to populate it to confine them in a
block that needs them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter does two separate things:
- Parse the list of commits on the command line, and formulate the
list of commits to be merged (including the current HEAD);
- Compute the list of parents to be recorded in the resulting merge
commit.
Split the latter into a separate helper function, so that we can
later supply the list commits to be merged from a different source
(namely, FETCH_HEAD).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify this small function in three ways.
- The function initially collects all commits to be merged into a
commit_list "remoteheads"; the "remotes" pointer always points at
the tail of this list (either the remoteheads variable itself, or
the ->next slot of the element at the end of the list) to help
elongate the list by repeated calls to commit_list_insert().
Because the new element appended by commit_list_insert() will
always have its ->next slot NULLed out, there is no need for us
to assign NULL to *remotes to terminate the list at the end.
- The variable "head_subsumed" always confused me every time I read
this code. What is happening here is that we inspect what the
caller told us to merge (including the current HEAD) and come up
with the list of parents to be recorded for the resulting merge
commit, omitting commits that are ancestor of other commits.
This filtering may remove the current HEAD from the resulting
parent list---and we signal that fact with this variable, so that
we can later record it as the first parent when "--no-ff" is in
effect.
- The "parents" list is created for this function by reduce_heads()
and was not deallocated after its use, even though the loop
control was written in such a way to allow us to do so by taking
the "next" element in a separate variable so that it can be used
in the next-step part of the loop control.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a merged object name like "foo~20" to formulate a merge
summary "Merge branch foo (early part)", a temporary strbuf is used,
but we forgot to deallocate it when we failed to find the named
branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reject merging multiple commits into an unborn branch, we check
argc, thinking that collect_parents() that reads the remaining
command line arguments from <argc, argv> will give us the same
number of commits as its input, i.e. argc.
Because what we really care about is the number of commits, let the
function run and then make sure it returns only one commit instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having it as one of the three if/elseif/.. case arms,
test the condition and handle this special case upfront. This makes
it easier to follow the flow of logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things cmd_merge() does is to see if the "--abort"
option is given and run "reset --merge" and exit. When the control
reaches this point, we know "--abort" was not given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A broken or badly formatted commit might not record author or
committer lines or we may not find a valid name on them. The
function record_person() returned after calling get_commit_buffer()
without calling unuse_commit_buffer() on the memory it obtained in
such cases, potentially leaking it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we know the number of objects in the input pack, we allocate an
array of nr_objects of struct delta_entry. On x86-64, this struct is
32 bytes long. The union delta_base, which is part of struct
delta_entry, provides enough space to store either ofs-delta (8 bytes)
or ref-delta (20 bytes).
Because ofs-delta encoding is more efficient space-wise and more
performant at runtime than ref-delta encoding, Git packers try to use
ofs-delta whenever possible, and it is expected that objects encoded
as ref-delta are minority.
In the best clone case where no ref-delta object is present, we waste
(20-8) * nr_objects bytes because of this union. That's about 38MB out
of 100MB for deltas[] with 3.4M objects, or 38%. deltas[] would be
around 62MB without the waste.
This patch attempts to eliminate that. deltas[] array is split into
two: one for ofs-delta and one for ref-delta. Many functions are also
duplicated because of this split. With this patch, ofs_deltas[] array
takes 51MB. ref_deltas[] should remain unallocated in clone case (0
bytes). This array grows as we see ref-delta. We save about half in
this case, or 25% of total bookkeeping.
The saving is more than the calculation above because some padding in
the old delta_entry struct is removed. ofs_delta_entry is 16 bytes,
including the 4 bytes padding. That's 13MB for padding, but packing
the struct could break platforms that do not support unaligned
access. If someone on 32-bit is really low on memory and only deals
with packs smaller than 2G, using 32-bit off_t would eliminate the
padding and save 27MB on top.
A note about ofs_deltas allocation. We could use ref_deltas memory
allocation strategy for ofs_deltas. But that probably just adds more
overhead on top. ofs-deltas are generally the majority (1/2 to 2/3) in
any pack. Incremental realloc may lead to too many memcpy. And if we
preallocate, say 1/2 or 2/3 of nr_objects initially, the growth rate
of ALLOC_GROW() could make this array larger than nr_objects, wasting
more memory.
Brought-up-by: Matthew Sporleder <msporleder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name (not user) and email setting should be in config section
"user" and not in "core" as documented in Documentation/config.txt.
Signed-off-by: Ossi Herrala <oherrala@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2bf15a3330, whose
intention was good, but the verbosity levels used in merge-recursive
turns out to be rather uneven. For example, a merge of two branches
with conflicting submodule updates used to report CONFLICT: output
with --quiet but no longer (which *is* desired), while the final
"Automatic merge failed; fix conflicts and then commit" message is
still shown even with --quiet (which *is* inconsistent).
Originally reported by Bryan Turner; it is too early to declare what
the concensus is, but it seems that we would need to level the
verbosity levels used in merge strategy backends before we can go
forward. In the meantime, we'd revert to the old behaviour until
that happens.
cf. $gmane/267245
"git merge --quiet" did not squelch messages from the underlying
merge-recursive strategy.
* jk/merge-quiet:
merge: pass verbosity flag down to merge-recursive
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
The "help-all" option is being initialized with a wrong value.
While being semantically wrong this can also cause a segmentation
fault in gcc on ARMv7 hardfloat platforms with a hardened
toolchain. Fix this by initializing with a NULL value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When detached and checking out a branch again, git checkout warns
about commit(s) that might get lost. It says "If you want to keep
them ..." even for only one commit.
Use Q_() to allow differentiating singular vs plural.
Signed-off-by: Thomas Schneider <thosch97@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "git merge --quiet" really quiet when we call
into merge-recursive.
Note that we can't just pass our flag down as-is; the two
parts of the code use different scales. We center at "0" as
normal for git-merge (with "--quiet" giving a negative
value), but merge-recursive uses "2" as its center. This
patch passes a negative value to merge-recursive rather than
"1", though, as otherwise the user would have to use "-qqq"
to squelch all messages (but the downside is that the user
cannot distinguish between levels 0-2 if without resorting
to the GIT_MERGE_VERBOSITY variable).
We may want to review and renormalize the message severities
in merge-recursive, but that does not have to happen now.
This is at least in improvement in the sense that we are
respecting "--quiet" at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you create a git repository in the root directory with
"git init /", we erroneously write a core.worktree entry.
This isn't _wrong_, in the sense that it's OK to set
core.worktree when we don't need to. But it is unnecessarily
surprising if you later move the .git directory to another
path (which usually moves the relative working tree, but is
foiled if there is an explicit worktree set).
The problem is that we check whether core.worktree is
necessary by seeing if we can make the git_dir by
concatenating "/.git" onto the working tree. That would lead
to "//.git" in this instance, but we actually have "/.git"
(without the doubled slash).
We can fix this by special-casing the root directory. I also
split the logic out into its own function to make the
conditional a bit more readable (and used skip_prefix, which
I think makes it a little more obvious what is going on).
No tests, as we would need to be able to write to "/" to do
so. I did manually confirm that:
sudo git init /
cd /
git rev-parse --show-toplevel
git config core.worktree
still finds the top-level correctly (as "/"), and does not
set any core.worktree variable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --topics <rev> <revs>..." displays ancestry graph, only
considering commits that are in all given revs, except the first one.
"git show-branch" displays ancestry graph for all local branches.
Unfortunately, "git show-branch --topics <rev>" only prints out the rev
info for the given rev, and nothing else, e.g.:
$ git show-branch --topics origin/master
[origin/master] Sync with 2.3.3
While there is an option to add all remote-tracking branches (-r), and
another to add all local+remote branches (-a), there is no option to add
only local branches. Adding such an option could be considered, but a
user would likely already expect that the above command line considers
the lack of rev other than for --topics as meaning all local branches,
like when there is no argument at all.
Moreover, when using -r and -a along with --topics, the first local or
remote-tracking branch, depending on alphabetic order is used instead of
the one given after --topics (any rev given on the command line is
actually simply ignored when either -r or -a is given). And if no rev is
given at all, the fact that the first alphetical branch is the base of
topics is probably not expected by users (Maybe --topics should always
require one rev on the command line?)
This change makes
"show-branch --topics $rev"
act as
"show-branch --topics $rev $(git for-each-ref refs/heads
--format='%(refname:short)')"
"show-branch -r --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/remotes
--format='%(refname:short)')"
and
"show-branch -a --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find an object in a packfile index, we make sure we
can still open the packfile itself (or that it is already
open), as it might have been deleted by a simultaneous
repack. If we can't access the packfile, we print a warning
for the user and tell the caller that we don't have the
object (we can then look in other packfiles, or find a loose
version, before giving up).
The warning we print to the user isn't really accomplishing
anything, and it is potentially confusing to users. In the
normal case, it is complete noise; we find the object
elsewhere, and the user does not have to care that we racily
saw a packfile index that became stale. It didn't affect the
operation at all.
A possibly more interesting case is when we later can't find
the object, and report failure to the user. In this case the
warning could be considered a clue toward that ultimate
failure. But it's not really a useful clue in practice. We
wouldn't even print it consistently (since we are racing
with another process, we might not even see the .idx file,
or we might win the race and open the packfile, completing
the operation).
This patch drops the warning entirely (not only from the
fill_pack_entry site, but also from an identical use in
pack-objects). If we did find the warning interesting in the
error case, we could stuff it away and reveal it to the user
when we later die() due to the broken object. But that
complexity just isn't worth it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries added by "git add -N" are reminder for the user so that they
don't forget to add them before committing. These entries appear in
the index even though they are not real. Their presence in the index
leads to a confusing "git status" like this:
On branch master
Changes to be committed:
new file: foo
Changes not staged for commit:
modified: foo
If you do a "git commit", "foo" will not be included even though
"status" reports it as "to be committed". This patch changes the
output to become
On branch master
Changes not staged for commit:
new file: foo
no changes added to commit
The two hunks in diff-lib.c adjust "diff-index" and "diff-files" so
that i-t-a entries appear as new files in diff-files and nothing in
diff-index.
Due to this change, diff-files may start to report "new files" for the
first time. "add -u" needs to be told about this or it will die in
denial, screaming "new files can't exist! Reality is wrong." Luckily,
it's the only one among run_diff_files() callers that needs fixing.
Now in the new world order, a hierarchy in the index that contain
i-t-a paths is written out as a tree object as if these i-t-a
entries do not exist, and comparing the index with such a tree
object that would result from writing out the hierarchy will result
in no difference. Update a test in t2203 that expected the i-t-a
entries to appear as "added to the index" in the comparison to
instead expect no output.
An earlier change eec3e7e4 (cache-tree: invalidate i-t-a paths after
generating trees, 2012-12-16) becomes an unnecessary pessimization
in the new world order---a cache-tree in the index that corresponds
to a hierarchy with i-t-a paths can now be marked as valid and
record the object name of the tree that results from writing a tree
object out of that hierarchy, as it will compare equal to that tree.
Reverting the commit is left for the future, though, as it is purely
a performance issue and no longer affects correctness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
oldlines is allocated earlier in the function and also freed on the
successful code path.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
