Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to discern which ref storage format a repository is supposed to
use we need to start setting up and/or discovering the format. This
needs to happen in two separate code paths.
- The first path is when we create a repository via `init_db()`. When
we are re-initializing a preexisting repository we need to retain
the previously used ref storage format -- if the user asked for a
different format then this indicates an error and we error out.
Otherwise we either initialize the repository with the format asked
for by the user or the default format, which currently is the
"files" backend.
- The second path is when discovering repositories, where we need to
read the config of that repository. There is not yet any way to
configure something other than the "files" backend, so we can just
blindly set the ref storage format to this backend.
Wire up this logic so that we have the ref storage format always readily
available when needed. As there is only a single backend and because it
is not configurable we cannot yet verify that this tracking works as
expected via tests, but tests will be added in subsequent commits. To
countermand this ommission now though, raise a BUG() in case the ref
storage format is not set up properly in `ref_store_init()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're currently creating the reference database with a potentially
incorrect object format when the remote repository's object format is
different from the local default object format. This works just fine for
now because the files backend never records the object format anywhere.
But this logic will fail with any new reference backend that encodes
this information in some form either on-disk or in-memory.
The preceding commits have reshuffled code in git-clone(1) so that there
is no code path that will access the reference database before we have
detected the remote's object format. With these refactorings we can now
defer initialization of the reference database until after we have
learned the remote's object format and thus initialize it with the
correct format from the get-go.
These refactorings are required to make git-clone(1) work with the
upcoming reftable backend when cloning repositories with the SHA256
object format.
This change breaks a test in "t5550-http-fetch-dumb.sh" when cloning an
empty repository with `GIT_TEST_DEFAULT_HASH=sha256`. The test expects
the resulting hash format of the empty cloned repository to match the
default hash, but now we always end up with a sha1 repository. The
problem is that for dumb HTTP fetches, we have no easy way to figure out
the remote's hash function except for deriving it based on the hash
length of refs in `info/refs`. But as the remote repository is empty we
cannot rely on this detection mechanism.
Before the change in this commit we already initialized the repository
with the default hash function and then left it as-is. With this patch
we always use the hash function detected via the remote, where we fall
back to "sha1" in case we cannot detect it.
Neither the old nor the new behaviour are correct as we second-guess the
remote hash function in both cases. But given that this is a rather
unlikely edge case (we use the dumb HTTP protocol, the remote repository
uses SHA256 and the remote repository is empty), let's simply adapt the
test to assert the new behaviour. If we want to properly address this
edge case in the future we will have to extend the dumb HTTP protocol so
that we can properly detect the hash function for empty repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to skip creation of the reference database via a new flag
`INIT_DB_SKIP_REFDB`, which is required for git-clone(1) so that we can
create it at a later point once the object format has been discovered
from the remote repository.
Note that we also uplift the call to `create_reference_database()` into
`init_db()`, which makes it easier to handle the new flag for us. This
changes the order in which we do initialization so that we now set up
the Git configuration before we create the reference database. In
practice this move should not result in any change in behaviour.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many reasons why discovering a Git directory may fail. In
particular, 8959555cee (setup_git_directory(): add an owner check for
the top-level directory, 2022-03-02) added ownership checks as a
security precaution.
Callers attempting to set up a Git directory may want to inform the user
about the reason for the failure. For that, expose the enum
discovery_result from within setup.c and move it into cache.h where
discover_git_directory() is defined.
I initially wanted to change the return type of discover_git_directory()
to be this enum, but several callers rely upon the "zero means success".
The two problems with this are:
1. The zero value of the enum is actually GIT_DIR_NONE, so nonpositive
results are errors.
2. There are multiple successful states; positive results are
successful.
It is worth noting that GIT_DIR_NONE is not returned, so we remove this
option from the enum. We must be careful to keep the successful reasons
as positive values, so they are given explicit positive values.
Instead of updating all callers immediately, add a new method,
discover_git_directory_reason(), and convert discover_git_directory() to
be a thin shim on top of it.
One thing that is important to note is that discover_git_directory()
previously returned -1 on error, so let's continue that into the future.
There is only one caller (in scalar.c) that depends on that signedness
instead of a non-zero check, so clean that up, too.
Because there are extra checks that discover_git_directory_reason() does
after setup_git_directory_gently_1(), there are other modes that can be
returned for failure states. Add these modes to the enum, but be sure to
explicitly add them as BUG() states in the switch of
setup_git_directory_gently().
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions init_db() and initialize_repository_version() were shared
by builtin/init-db.c and builtin/clone.c, and declared in cache.h.
Move these functions, plus their several helpers only used by these
functions, to setup.[ch].
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
