Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note in particular that this reverses the decision made in 118a2e8bde
("cache: move ensure_full_index() to cache.h", 2021-04-01).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the rule added in [1] to change "cache_name_pos" to
"index_name_pos", which allows us to get rid of another
"USE_THE_INDEX_COMPATIBILITY_MACROS" macro.
The replacement of "USE_THE_INDEX_COMPATIBILITY_MACROS" here with
"USE_THE_INDEX_VARIABLE" is a manual change on top, now that these
files only use "&the_index", and don't need any compatibility
macros (or functions).
1. 0e6550a2c6 (cocci: add a index-compatibility.pending.cocci,
2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse-options callback for --again soaks up all remaining options by
manipulating the parse_opt_ctx's argc and argv fields. Even though it
has to look at both, the actual parsing happens via the do_reupdate()
helper, which only looks at the argv half (by passing it along to
parse_pathspec). So that helper doesn't need to see argc at all.
Note that the helper does look at "argv + 1" without confirming that
argc is greater than 0. We know this is correct because it is skipping
past the actual "--again" string, which will always be present. However,
to make what's going on more obvious, let's move that "+1" into the
caller, which has the matching "-1" when fixing up the ctx's argc/argv.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
Introduce a filesystem-dependent mechanism to optimize the way the
bits for many loose object files are ensured to hit the disk
platter.
* ns/batch-fsync:
core.fsyncmethod: performance tests for batch mode
t/perf: add iteration setup mechanism to perf-lib
core.fsyncmethod: tests for batch mode
test-lib-functions: add parsing helpers for ls-files and ls-tree
core.fsync: use batch mode and sync loose objects by default on Windows
unpack-objects: use the bulk-checkin infrastructure
update-index: use the bulk-checkin infrastructure
builtin/add: add ODB transaction around add_files_to_cache
cache-tree: use ODB transaction around writing a tree
core.fsyncmethod: batched disk flushes for loose-objects
bulk-checkin: rebrand plug/unplug APIs as 'odb transactions'
bulk-checkin: rename 'state' variable and separate 'plugged' boolean
Bare repos do not have a worktree, so there is nothing for the
daemon watch.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update-index functionality is used internally by 'git stash push' to
setup the internal stashed commit.
This change enables odb-transactions for update-index infrastructure to
speed up adding new objects to the object database by leveraging the
batch fsync functionality.
There is some risk with this change, since under batch fsync, the object
files will be in a tmp-objdir until update-index is complete, so callers
using the --stdin option will not see them until update-index is done.
This risk is mitigated by flushing the ODB transaction prior to
reporting any verbose output so that objects will be visible to callers
that are synchronizing with update-index by snooping its output.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
Replace unconditional index expansion in 'do_reupdate()' with one scoped to
only where a full index is needed. A full index is only required in
'do_reupdate()' when a sparse directory in the index differs from HEAD; in
that case, the index is expanded and the operation restarted.
Because the index should only be expanded if a sparse directory is modified,
add a test ensuring the index is not expanded when differences only exist
within the sparse cone.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable use of the sparse index with `update-index`. Most variations of
`update-index` work without explicitly expanding the index or making any
other updates in or outside of `update-index.c`.
The one usage requiring additional changes is `--cacheinfo`; if a file
inside a sparse directory was specified, the index would not be expanded
until after the cache tree is invalidated, leading to a mismatch between the
index and cache tree. This scenario is handled by rearranging
`add_index_entry_with_check`, allowing `index_name_stage_pos` to expand the
index *before* attempting to invalidate the relevant cache tree path,
avoiding cache tree/index corruption.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git update-index --refresh' and '--really-refresh' should force writing
of the index file if racy timestamps have been encountered, as
'git status' already does [1].
Note that calling 'git update-index --refresh' still does not guarantee
that there will be no more racy timestamps afterwards (the same holds
true for 'git status'):
- calling 'git update-index --refresh' immediately after touching and
adding a file may still leave racy timestamps if all three operations
occur within the racy-tolerance (usually 1 second unless USE_NSEC has
been defined)
- calling 'git update-index --refresh' for timestamps which are set into
the future will leave them racy
To guarantee that such racy timestamps will be resolved would require to
wait until the system clock has passed beyond these timestamps and only
then write the index file. Especially for future timestamps, this does
not seem feasible because of possibly long delays/hangs.
[1] https://lore.kernel.org/git/d3dd805c-7c1d-30a9-6574-a7bfcb7fc013@syntevo.com/
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df1 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.untrackedCache config setting is slightly complicated,
so clarify its use and centralize its parsing into the repo
settings.
The default value is "keep" (returned as -1), which persists the
untracked cache if it exists.
If the value is set as "false" (returned as 0), then remove the
untracked cache if it exists.
If the value is set as "true" (returned as 1), then write the
untracked cache and persist it.
Instead of relying on magic values of -1, 0, and 1, split these
options into an enum. This allows the use of "-1" as a
default value. After parsing the config options, if the value is
unset we can initialize it to UNTRACKED_CACHE_KEEP.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need to pass down the `struct index_state` to
`mark_fsmonitor_valid()` for an upcoming bug fix, and this here function
calls that there function, so we need to extend the signature of
`fill_stat_cache_info()` first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved. As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users. This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.
* en/merge-directory-renames:
merge-recursive: switch directory rename detection default
merge-recursive: give callers of handle_content_merge() access to contents
merge-recursive: track information associated with directory renames
t6043: fix copied test description to match its purpose
merge-recursive: switch from (oid,mode) pairs to a diff_filespec
merge-recursive: cleanup handle_rename_* function signatures
merge-recursive: track branch where rename occurred in rename struct
merge-recursive: remove ren[12]_other fields from rename_conflict_info
merge-recursive: shrink rename_conflict_info
merge-recursive: move some struct declarations together
merge-recursive: use 'ci' for rename_conflict_info variable name
merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
merge-recursive: rename diff_filespec 'one' to 'o'
merge-recursive: rename merge_options argument from 'o' to 'opt'
Use 'unsigned short' for mode, like diff_filespec does
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
struct diff_filespec defines mode to be an 'unsigned short'. Several
other places in the API which we'd like to interact with using a
diff_filespec used a plain unsigned (or unsigned int). This caused
problems when taking addresses, so switch to unsigned short.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix is always a NUL-terminated string, and we just end up passing
it along to parse_pathspec() anyway (which does not even take a length).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various functions have been audited for "-Wunused-parameter" warnings
and bugs in them got fixed.
* jk/unused-parameter-fixes:
midx: double-check large object write loop
assert NOARG/NONEG behavior of parse-options callbacks
parse-options: drop OPT_DATE()
apply: return -1 from option callback instead of calling exit(1)
cat-file: report an error on multiple --batch options
tag: mark "--message" option with NONEG
show-branch: mark --reflog option as NONEG
format-patch: mark "--no-numbered" option with NONEG
status: mark --find-renames option with NONEG
cat-file: mark batch options with NONEG
pack-objects: mark index-version option as NONEG
ls-files: mark exclude options as NONEG
am: handle --no-patch-format option
apply: mark include/exclude options as NONEG
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With refresh_index() learning to utilize preload_index() to speed up its
operation there is no longer any benefit to having the caller preload the
index first. Remove those unneeded calls by calling read_index() instead of
the preload variant.
There is no measurable performance impact of this patch - the 2nd call to
preload_index() bails out quickly but there is no reason to call it twice.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
