Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We switched the function interface for fsck callbacks in a1aad71601
(fsck.h: use "enum object_type" instead of "int", 2021-03-28). However,
we accidentally flipped the type back to "int" as part of 0b4e9013f1
(fsck: mark unused parameters in various fsck callbacks, 2023-07-03).
The mistake happened because that commit was written before a1aad71601
and rebased forward, and I screwed up while resolving the conflict.
Curiously, the compiler does not warn about this mismatch, at least not
when using gcc and clang on Linux (nor in any of our CI environments).
Based on 28abf260a5 (builtin/fsck.c: don't conflate "int" and "enum" in
callback, 2021-06-01), I'd guess that this would cause the AIX xlc
compiler to complain. I noticed because clang-18's UBSan now identifies
mis-matched function calls at runtime, and does complain of this case
when running the test suite.
I'm not entirely clear on whether this mismatch is a problem in
practice. Compilers are certainly free to make enums smaller than "int"
if they don't need the bits, but I suspect that they have to promote
back to int for function calls (though I didn't dig in the standard, and
I won't be surprised if I'm simply wrong and the real-world impact would
depend on the ABI).
Regardless, switching it back to enum is obviously the right thing to do
here; the switch to "int" was simply a mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
"git fsck --no-progress" still spewed noise from the commit-graph
subsystem, which has been corrected.
* tb/fsck-no-progress:
commit-graph.c: avoid duplicated progress output during `verify`
commit-graph.c: pass progress to `verify_one_commit_graph()`
commit-graph.c: iteratively verify commit-graph chains
commit-graph.c: extract `verify_one_commit_graph()`
fsck: suppress MIDX output with `--no-progress`
fsck: suppress commit-graph output with `--no-progress`
There are a few callback functions which are used with the fsck code,
but it's natural that not all callbacks need all parameters. For
reporting, even something as obvious as "the oid of the object which had
a problem" is not always used, as some callers are only checking a
single object in the first place. And for both reporting and walking,
things like void data pointers and the fsck_options aren't always
necessary.
But since each such parameter is used by _some_ callback, we have to
keep them in the interface. Mark the unused ones in specific callbacks
to avoid triggering -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous commit, address a bug where `git
fsck` produces output when calling `git multi-pack-index verify` even
when invoked with `--no-progress`.
$ git.compile fsck --connectivity-only --no-progress --no-dangling
Verifying OID order in multi-pack-index: 100% (605677/605677), done.
Sorting objects by packfile: 100% (605678/605678), done.
Verifying object offsets: 100% (605678/605678), done.
The three lines produced by `git fsck` come from `git multi-pack-index
verify`, but should be squelched due to `--no-progress`.
The MIDX machinery learned to generate these progress messages as early
as 430efb8a74 (midx: add progress indicators in multi-pack-index
verify, 2019-03-21), but did not respect `--progress` or `--no-progress`
until ad60096d1c (midx: honor the MIDX_PROGRESS flag in
verify_midx_file, 2019-10-21).
But the `git multi-pack-index verify` step was added to fsck in
66ec0390e7 (fsck: verify multi-pack-index, 2018-09-13), pre-dating any
of the above patches.
Pass `--[no-]progress` as appropriate to ensure that we don't produce
output when told not to.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since e0fd51e1d7 (fsck: verify commit-graph, 2018-06-27), `fsck` runs
`git commit-graph verify` to check the integrity of any commit-graph(s).
Originally, the `git commit-graph verify` step would always print to
stdout/stderr, regardless of whether or not `fsck` was invoked with
`--[no-]progress` or not. But in 7371612255 (commit-graph: add
--[no-]progress to write and verify, 2019-08-26), the commit-graph
machinery learned the `--[no-]progress` option, though `fsck` was not
updated to pass this new flag (or not).
This led to seeing output from running `git fsck`, even with
`--no-progress` on repositories that have a commit-graph:
$ git.compile fsck --connectivity-only --no-progress --no-dangling
Verifying commits in commit graph: 100% (4356/4356), done.
Verifying commits in commit graph: 100% (131912/131912), done.
Ensure that `fsck` passes `--[no-]progress` as appropriate when calling
`git commit-graph verify`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
When reporting a problem, `git fsck` emits a message such as:
missing blob 1234abcd (:file)
However, this can be ambiguous when the problem is detected in the index
of a worktree other than the one in which `git fsck` was invoked. To
address this shortcoming, 592ec63b38 (fsck: mention file path for index
errors, 2023-02-24) enhanced the output to mention the path of the index
when the problem is detected in some other worktree:
missing blob 1234abcd (.git/worktrees/wt/index:file)
Unfortunately, the variable in fsck_index() which controls whether the
index path should be shown is misleadingly named "is_main_index" which
can be misunderstood as referring to the main worktree (i.e. the one
housing the .git/ repository) rather than to the current worktree (i.e.
the one in which `git fsck` was invoked). Avoid such potential confusion
by choosing a name more reflective of its actual purpose.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a mechanism to disable replace refs globally and per
repository.
* ds/disable-replace-refs:
repository: create read_replace_refs setting
replace-objects: create wrapper around setting
repository: create disable_replace_refs()
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note in particular that this reverses the decision made in 118a2e8bde
("cache: move ensure_full_index() to cache.h", 2021-04-01).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several builtins depend on being able to disable the replace references
so we actually operate on each object individually. These currently do
so by directly mutating the 'read_replace_refs' global.
A future change will move this global into a different place, so it will
be necessary to change all of these lines. However, we can simplify that
transition by abstracting the purpose of these global assignments with a
method call.
We will need to keep this read_replace_refs global forever, as we want
to make sure that we never use replace refs throughout the life of the
process if this method is called. Future changes may present a
repository-scoped version of the variable to represent that repository's
core.useReplaceRefs config value, but a zero-valued read_replace_refs
will always override such a setting.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0d30feef3c (fsck: create scaffolding for rev-index checks,
2023-04-17) and later 5a6072f631 (fsck: validate .rev file header,
2023-04-17), the check_pack_rev_indexes() method was created with a
'struct repository *r' parameter. However, this parameter was unused and
instead 'the_repository' was used in its place.
Fix this situation with the obvious replacement.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a filesystem-level corruption occurs in a .bitmap file, Git can react
poorly. This could take the form of a run-time error due to failing to
parse an EWAH bitmap or be more subtle such as returning the wrong set
of objects to a fetch or clone.
A natural first response to either of these kinds of errors is to run
'git fsck' to see if any files are corrupt. This currently ignores all
.bitmap files.
Add checks to 'git fsck' for all .bitmap files that are currently
associated with a multi-pack-index or pack file. Verify their checksums
using the hashfile API.
We iterate through all multi-pack-indexes and pack-files to be sure to
check all .bitmap files, not just the one that would be read by the
process. For example, a multi-pack-index bitmap overrules a pack-bitmap.
However, if the multi-pack-index is removed, the pack-bitmap may be
selected instead. Be thorough to include every file that could become
active in such a way. This includes checking files in alternates.
There is potential that we could extend this effort to check the
structure of the reachability bitmaps themselves, but it is very
expensive to do so. At minimum, it's as expensive as generating the
bitmaps in the first place, and that's assuming that we don't use the
trivial algorithm of verifying each bitmap individually. The trivial
algorithm will result in quadratic behavior (number of objects times
number of bitmapped commits) while the bitmap building operation
constructs a lattice of commits to build bitmaps incrementally and then
generate the final bitmaps from a subset of those commits.
If we were to extend 'git fsck' to check .bitmap file contents more
closely like this, then we would likely want to hide it behind an option
that signals the user is more willing to do expensive operations such as
this.
For testing, set up a repository with a pack-bitmap _and_ a
multi-pack-index bitmap. This requires some file movement to avoid
deleting the pack-bitmap during the repack that creates the
multi-pack-index bitmap. We can then verify that 'git fsck' is checking
all files, not just the "active" bitmap.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While parsing a .rev file, we check the header information to be sure it
makes sense. This happens before doing any additional validation such as
a checksum or value check. In order to differentiate between a bad
header and a non-existent file, we need to update the API for loading a
reverse index.
Make load_pack_revindex_from_disk() non-static and specify that a
positive value means "the file does not exist" while other errors during
parsing are negative values. Since an invalid header prevents setting up
the structures we would use for further validations, we can stop at that
point.
The place where we can distinguish between a missing file and a corrupt
file is inside load_revindex_from_disk(), which is used both by pack
rev-indexes and multi-pack-index rev-indexes. Some tests in t5326
demonstrate that it is critical to take some conditions to allow
positive error signals.
Add tests that check the three header values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'fsck' builtin checks many of Git's on-disk data structures, but
does not currently validate the pack rev-index files (a .rev file to
pair with a .pack and .idx file).
Before doing a more-involved check process, create the scaffolding
within builtin/fsck.c to have a new error type and add that error type
when the API method verify_pack_revindex() returns an error. That method
does nothing currently, but we will add checks to it in later changes.
For now, check that 'git fsck' succeeds without any errors in the normal
case. Future checks will be paired with tests that corrupt the .rev file
appropriately.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
In fb64ca526a (fsck: check index files in all worktrees, 2023-02-24), we
swapped out a call to vanilla repo_read_index() for a series of
read_index_from() calls, one per worktree. The code for the latter was
copied from add_index_objects_to_pending(), which checks for a positive
return value from the index reading function, and we do the same here in
fsck now.
But this is probably the wrong thing. I had interpreted the check as
"don't operate on the index struct if there was an error". But in
reality, if there is an error then the index-reading code will simply
die (which admittedly is not great for fsck, but that is not a new
problem).
The return value here is actually the number of entries read. So it
makes sense for add_index_objects_to_pending() to ignore a zero-entry
index (there is nothing to add). But for fsck, we would still want to
check any extensions, etc (though presumably it is unlikely to have them
in an empty index, I don't think it's impossible).
So we should ignore the return value from read_index_from() entirely.
This matches the behavior before fb64ca526a, when we ignored the return
value from repo_read_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to fsck an index operates directly on the_index. Let's move it
into its own function in preparation for handling the index files from
other worktrees.
Since we now have only a single reference to the_index, let's drop
our USE_THE_INDEX_VARIABLE definition and just use the_repository.index
directly. That's a minor cleanup, but also ensures that we didn't miss
any references when moving the code into fsck_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust several files to be more explicit about their dependency on
replace-objects to accommodate this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
Change those built-in commands that were attempting to exhaustively
list the options in the "-h" output to actually do so, and always
have *.txt documentation know about the exhaustive list of options.
Let's also fix the documentation and -h output for those built-in
commands where the *.txt and -h output was a mismatch of missing
options on both sides.
In the case of "interpret-trailers" fixing the missing options reveals
that the *.txt version was implicitly claiming that the command had
two operating modes, which a look at the -h version (and studying the
documentation) will show is not the case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" failed to release contents of tree objects already used
from the memory, which has been fixed.
* jk/fsck-on-diet:
parse_object_buffer(): respect save_commit_buffer
fsck: turn off save_commit_buffer
fsck: free tree buffers after walking unreachable objects
If the global variable "save_commit_buffer" is set to 0, then
parse_commit() will throw away the commit object data after parsing it,
rather than sticking it into a commit slab. This goes all the way back
to 60ab26de99 ([PATCH] Avoid wasting memory in git-rev-list,
2005-09-15).
But there's another code path which may similarly stash the buffer:
parse_object_buffer(). This is where we end up if we parse a commit via
parse_object(), and it's used directly in a few other code paths like
git-fsck.
The original goal of 60ab26de99 was avoiding extra memory usage for
rev-list. And there it's not all that important to catch parse_object().
We use that function only for looking at the tips of the traversal, and
the majority of the commits are parsed by following parent links, where
we use parse_commit() directly. So we were wasting some memory, but only
a small portion.
It's much easier to see the effect with fsck. Since we now turn off
save_commit_buffer by default there, we _should_ be able to drop the
freeing of the commit buffer in fsck_obj(). But if we do so (taking the
first hunk of this patch without the rest), then the peak heap of "git
fsck" in a clone of git.git goes from 136MB to 194MB. Teaching
parse_object_buffer() to respect save_commit_buffer brings that down to
134.5MB (it's hard to tell from massif's output, but I suspect the
savings comes from avoiding the overhead of the mostly-empty commit
slab).
Other programs should see a small improvement. Both "rev-list --all" and
"fsck --connectivity-only" improve by a few hundred kilobytes, as they'd
avoid loading the tip objects of their traversals.
Most importantly, no code should be hurt by doing this. Any program that
turns off save_commit_buffer is already making the assumption that any
commit it sees may need to have its object data loaded on demand, as it
doesn't know which ones were parsed by parse_commit() versus
parse_object(). Not to mention that anything parsed by the commit graph
may be in the same boat, even if save_commit_buffer was not disabled.
This should be the only spot that needs to be fixed. Grepping for
set_commit_buffer() shows that this and parse_commit() are the only
relevant calls.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a commit, the default behavior is to stuff the original
buffer into a commit_slab (which takes ownership of it). But for a tool
like fsck, this isn't useful. While we may look at the buffer further as
part of fsck_commit(), we'll always do so through a separate pointer;
attaching the buffer to the slab doesn't help.
Worse, it means we have to remember to free the commit buffer in all
call paths. We do so in fsck_obj(), which covers a regular "git fsck".
But with "--connectivity-only", we forget to do so in both
traverse_one_object(), which covers reachable objects, and
mark_unreachable_referents(), which covers unreachable ones. As a
result, that mode ends up storing an uncompressed copy of every commit
on the heap at once.
We could teach the code paths for --connectivity-only to also free
commit buffers. But there's an even easier fix: we can just turn off the
save_commit_buffer flag, and then we won't attach them to the commits in
the first place.
This reduces the peak heap of running "git fsck --connectivity-only" in
a clone of linux.git from ~2GB to ~1GB. According to massif, the
remaining memory goes where you'd expect: the object structs themselves,
the obj_hash containing them, and the delta base cache.
Note that we'll leave the call to free commit buffers in fsck_obj() for
now; it's not quite redundant because of a related bug that we'll fix in
a subsequent commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After calling fsck_walk(), a tree object struct may be left in the
parsed state, with the full tree contents available via tree->buffer.
It's the responsibility of the caller to free these when it's done with
the object to avoid having many trees allocated at once.
In a regular "git fsck", we hit fsck_walk() only from fsck_obj(), which
does call free_tree_buffer(). Likewise for "--connectivity-only", we see
most objects via traverse_one_object(), which makes a similar call.
The exception is in mark_unreachable_referents(). When using both
"--connectivity-only" and "--dangling" (the latter of which is the
default), we walk all of the unreachable objects, and there we forget to
free. Most cases would not notice this, because they don't have a lot of
unreachable objects, but you can make a pathological case like this:
git clone --bare /path/to/linux.git repo.git
cd repo.git
rm packed-refs ;# now everything is unreachable!
git fsck --connectivity-only
That ends up with peak heap usage ~18GB, which is (not coincidentally)
close to the size of all uncompressed trees in the repository. After
this patch, the peak heap is only ~2GB.
A few things to note:
- it might seem like fsck_walk(), if it is parsing the trees, should
be responsible for freeing them. But the situation is quite tricky.
In the non-connectivity mode, after we call fsck_walk() we then
proceed with fsck_object() which actually does the type-specific
sanity checks on the object contents. We do pass our own separate
buffer to fsck_object(), but there's a catch: our earlier call to
parse_object_buffer() may have attached that buffer to the object
struct! So by freeing it, we leave the rest of the code with a
dangling pointer.
Likewise, the call to fsck_walk() in index-pack is subtle. It
attaches a buffer to the tree object that must not be freed! And
so rather than calling free_tree_buffer(), it actually detaches it
by setting tree->buffer to NULL.
These cases would _probably_ be fixable by having fsck_walk() free
the tree buffer only when it was the one who allocated it via
parse_tree(). But that would still leave the callers responsible for
freeing other cases, so they wouldn't be simplified. While the
current semantics for fsck_walk() make it easy to accidentally leak
in new callers, at least they are simple to explain, and it's not a
function that's likely to get a lot of new call-sites.
And in any case, it's probably sensible to fix the leak first with
this simple patch, and try any more complicated refactoring
separately.
- a careful reader may notice that fsck_obj() also frees commit
buffers, but neither the call in traverse_one_object() nor the one
touched in this patch does so. And indeed, this is another problem
for --connectivity-only (and accounts for most of the 2GB heap after
this patch), but it's one we'll fix in a separate commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75d (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_reflog_ent() need to conform to a
particular interface, but not every function needs all of the
parameters. Mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
