Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --recurse-submodules --single-branch" now uses the same
single-branch option when cloning the submodules.
* es/recursive-single-branch-clone:
clone: pass --single-branch during --recurse-submodules
submodule--helper: use C99 named initializer
Previously, performing "git clone --recurse-submodules --single-branch"
resulted in submodules cloning all branches even though the superproject
cloned only one branch. Pipe --single-branch through the submodule
helper framework to make it to 'clone' later on.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the user to specify the hash algorithm on the command line by
using the --object-format option to git init. Validate that the user is
not attempting to reinitialize a repository with a different hash
algorithm. Ensure that if we are writing a non-SHA-1 repository that we
set the repository version to 1 and write the objectFormat extension.
Restrict this option to work only when ENABLE_SHA256 is set until the
codebase is in a situation to fully support this.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some rough edges in the sparse-checkout feature, especially around
the cone mode, have been cleaned up.
* ds/sparse-checkout-harden:
sparse-checkout: fix cone mode behavior mismatch
sparse-checkout: improve docs around 'set' in cone mode
sparse-checkout: escape all glob characters on write
sparse-checkout: use C-style quotes in 'list' subcommand
sparse-checkout: unquote C-style strings over --stdin
sparse-checkout: write escaped patterns in cone mode
sparse-checkout: properly match escaped characters
sparse-checkout: warn on globs in cone patterns
sparse-checkout: detect short patterns
sparse-checkout: cone mode does not recognize "**"
sparse-checkout: fix documentation typo for core.sparseCheckoutCone
clone: fix --sparse option with URLs
sparse-checkout: create leading directories
t1091: improve here-docs
t1091: use check_files to reduce boilerplate
Commit dfa33a298d ("clone: do faster object check for partial clones",
2019-04-21) optimized the connectivity check done when cloning with
--filter to check only the existence of objects directly pointed to by
refs. But this is not sufficient: they also need to be promisor objects.
Make this check more robust by instead checking that these objects are
promisor objects, that is, they appear in a promisor pack.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --sparse option was added to the clone builtin in d89f09c (clone:
add --sparse mode, 2019-11-21) and was tested with a local path clone
in t1091-sparse-checkout-builtin.sh. However, due to a difference in
how local paths are handled versus URLs, this mechanism does not work
with URLs.
Modify the test to use a "file://" URL, which would output this error
before the code change:
Cloning into 'clone'...
fatal: cannot change to 'file://.../repo': No such file or directory
error: failed to initialize sparse-checkout
These errors are due to using a "-C <path>" option to call 'git -C
<path> sparse-checkout init' but the URL is being given instead of
the target directory.
Update that target directory to evaluate this correctly. I have also
manually tested that https:// URLs are handled correctly as well.
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
In addition to preventing `.git` from being tracked by Git, on Windows
we also have to prevent `git~1` from being tracked, as the default NTFS
short name (also known as the "8.3 filename") for the file name `.git`
is `git~1`, otherwise it would be possible for malicious repositories to
write directly into the `.git/` directory, e.g. a `post-checkout` hook
that would then be executed _during_ a recursive clone.
When we implemented appropriate protections in 2b4c6efc82 (read-cache:
optionally disallow NTFS .git variants, 2014-12-16), we had analyzed
carefully that the `.git` directory or file would be guaranteed to be
the first directory entry to be written. Otherwise it would be possible
e.g. for a file named `..git` to be assigned the short name `git~1` and
subsequently, the short name generated for `.git` would be `git~2`. Or
`git~3`. Or even `~9999999` (for a detailed explanation of the lengths
we have to go to protect `.gitmodules`, see the commit message of
e7cb0b4455 (is_ntfs_dotgit: match other .git files, 2018-05-11)).
However, by exploiting two issues (that will be addressed in a related
patch series close by), it is currently possible to clone a submodule
into a non-empty directory:
- On Windows, file names cannot end in a space or a period (for
historical reasons: the period separating the base name from the file
extension was not actually written to disk, and the base name/file
extension was space-padded to the full 8/3 characters, respectively).
Helpfully, when creating a directory under the name, say, `sub.`, that
trailing period is trimmed automatically and the actual name on disk
is `sub`.
This means that while Git thinks that the submodule names `sub` and
`sub.` are different, they both access `.git/modules/sub/`.
- While the backslash character is a valid file name character on Linux,
it is not so on Windows. As Git tries to be cross-platform, it
therefore allows backslash characters in the file names stored in tree
objects.
Which means that it is totally possible that a submodule `c` sits next
to a file `c\..git`, and on Windows, during recursive clone a file
called `..git` will be written into `c/`, of course _before_ the
submodule is cloned.
Note that the actual exploit is not quite as simple as having a
submodule `c` next to a file `c\..git`, as we have to make sure that the
directory `.git/modules/b` already exists when the submodule is checked
out, otherwise a different code path is taken in `module_clone()` that
does _not_ allow a non-empty submodule directory to exist already.
Even if we will address both issues nearby (the next commit will
disallow backslash characters in tree entries' file names on Windows,
and another patch will disallow creating directories/files with trailing
spaces or periods), it is a wise idea to defend in depth against this
sort of attack vector: when submodules are cloned recursively, we now
_require_ the directory to be empty, addressing CVE-2019-1349.
Note: the code path we patch is shared with the code path of `git
submodule update --init`, which must not expect, in general, that the
directory is empty. Hence we have to introduce the new option
`--force-init` and hand it all the way down from `git submodule` to the
actual `git submodule--helper` process that performs the initial clone.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
"git fetch" codepath had a big "do not lazily fetch missing objects
when I ask if something exists" switch. This has been corrected by
marking the "does this thing exist?" calls with "if not please do not
lazily fetch it" flag.
* jt/fetch-remove-lazy-fetch-plugging:
promisor-remote: remove fetch_if_missing=0
clone: remove fetch_if_missing=0
fetch: remove fetch_if_missing=0
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6462d5eb9a ("fetch: remove fetch_if_missing=0", 2019-11-08)
strove to remove the need for fetch_if_missing=0 from the fetching
mechanism, so it is plausible to attempt removing fetch_if_missing=0
from clone as well. But doing so reveals a bug - when the server does
not send an object directly pointed to by a ref, this should be an
error, not a trigger for a lazy fetch. (This case in the fetching
mechanism was covered by a test using "git clone", not "git fetch",
which is why the aforementioned commit didn't uncover the bug.)
The bug can be fixed by suppressing lazy-fetching during the
connectivity check. Fix this bug, and remove fetch_if_missing from
clone.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/clone.c has a static function dir_exists() that
checks if a given path exists on the filesystem. It returns
true (and it is correct for it to return true) when the
given path exists as a non-directory (e.g. a regular file).
This is confusing. What the caller wants to check, and what
this function wants to return, is if the path exists, so
rename it to path_exists().
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
All of the existing uses of null_sha1 can be converted into uses of
null_oid, so do so. Remove null_sha1 and is_null_sha1, and define
is_null_oid in terms of null_oid. This also has the additional benefit
of removing several uses of sha1_to_hex.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
Adjust the dir-iterator API and apply it to the local clone
optimization codepath.
* mt/dir-iterator-updates:
clone: replace strcmp by fspathcmp
clone: use dir-iterator to avoid explicit dir traversal
clone: extract function from copy_or_link_directory
clone: copy hidden paths at local clone
dir-iterator: add flags parameter to dir_iterator_begin
dir-iterator: refactor state machine model
dir-iterator: use warning_errno when possible
dir-iterator: add tests for dir-iterator API
clone: better handle symlinked files at .git/objects/
clone: test for our behavior on odd objects/* content
Replace the use of strcmp by fspathcmp at copy_or_link_directory, which
is more permissive/friendly to case-insensitive file systems.
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace usage of opendir/readdir/closedir API to traverse directories
recursively, at copy_or_link_directory function, by the dir-iterator
API. This simplifies the code and avoids recursive calls to
copy_or_link_directory.
This process also makes copy_or_link_directory call die() in case of an
error on readdir or stat inside dir_iterator_advance. Previously it
would just print a warning for errors on stat and ignore errors on
readdir, which isn't nice because a local git clone could succeed even
though the .git/objects copy didn't fully succeed.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract dir creation code snippet from copy_or_link_directory to its own
function named mkdir_if_missing. This change will help to remove
copy_or_link_directory's explicit recursion, which will be done in a
following patch. Also makes the code more readable.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the copy_or_link_directory function no longer skip hidden
directories. This function, used to copy .git/objects, currently skips
all hidden directories but not hidden files, which is an odd behaviour.
The reason for that could be unintentional: probably the intention was
to skip '.' and '..' only but it ended up accidentally skipping all
directories starting with '.'. Besides being more natural, the new
behaviour is more permissive to the user.
Also adjust tests to reflect this behaviour change.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Co-authored-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently an odd behaviour when locally cloning a repository
with symlinks at .git/objects: using --no-hardlinks all symlinks are
dereferenced but without it, Git will try to hardlink the files with the
link() function, which has an OS-specific behaviour on symlinks. On OSX
and NetBSD, it creates a hardlink to the file pointed by the symlink
whilst on GNU/Linux, it creates a hardlink to the symlink itself.
On Manjaro GNU/Linux:
$ touch a
$ ln -s a b
$ link b c
$ ls -li a b c
155 [...] a
156 [...] b -> a
156 [...] c -> a
But on NetBSD:
$ ls -li a b c
2609160 [...] a
2609164 [...] b -> a
2609160 [...] c
It's not good to have the result of a local clone to be OS-dependent and
besides that, the current behaviour on GNU/Linux may result in broken
symlinks. So let's standardize this by making the hardlinks always point
to dereferenced paths, instead of the symlinks themselves. Also, add
tests for symlinked files at .git/objects/.
Note: Git won't create symlinks at .git/objects itself, but it's better
to handle this case and be friendly with users who manually create them.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Co-authored-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
Make the filter_spec string a string_list rather than a raw C string.
The list of strings must be concatted together to make a complete
filter_spec. A future patch will use this capability to build "combine:"
filter specs gradually.
A strbuf would seem to be a more natural choice for this object, but it
unfortunately requires initialization besides just zero'ing out the
memory. This results in all container structs, and all containers of
those structs, etc., to also require initialization. Initializing them
all would be more cumbersome that simply using a string_list, which
behaves properly when its contents are zero'd.
For the purposes of code simplification, change behavior in how filter
specs are conveyed over the protocol: do not normalize the tree:<depth>
filter specs since there should be no server in existence that supports
tree:# but not tree:#k etc.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a partial clone, the object filtering criteria is
recorded for the origin of the clone, but this incorrectly used a
hardcoded name "origin" to name that remote; it has been corrected
to honor the "--origin <name>" option.
* xl/record-partial-clone-origin:
clone: respect user supplied origin name when setting up partial clone
"git clone --recurse-submodules" learned to set up the submodules
to ignore commit object names recorded in the superproject gitlink
and instead use the commits that happen to be at the tip of the
remote-tracking branches from the get-go, by passing the new
"--remote-submodules" option.
* ba/clone-remote-submodules:
clone: add `--remote-submodules` flag
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `git clone --recurse-submodules` there was previously no way to
pass a `--remote` switch to the implicit `git submodule update` command for
any use case where you want the submodules to be checked out on their
remote-tracking branch rather than with the SHA-1 recorded in the superproject.
This patch rectifies this situation. It actually passes `--no-fetch` to
`git submodule update` as well on the grounds they the submodule has only just
been cloned, so fetching from the remote again only serves to slow things down.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
During an initial "git clone --depth=..." partial clone, it is
pointless to spend cycles for a large portion of the connectivity
check that enumerates and skips promisor objects (which by
definition is all objects fetched from the other side). This has
been optimized out.
* js/partial-clone-connectivity-check:
t/perf: add perf script for partial clones
clone: do faster object check for partial clones
Ever since the inception of this function in e6baf4a1ae (clone: clone
from a repository with relative alternates, 2011-08-22), the "dest"
parameter has been unused. Instead, we use add_to_alternates_file(),
which relies on git_pathdup() to find the right file. That in turn works
because we will have initialized and entered the destination repo by
this point.
It's a bit subtle, but this is how it has always worked. And if our
assumptions change, the test in t5601 from e6baf4a1ae should let us
know.
In the meantime, let's drop this unused and confusing parameter from
copy_alternates().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing machinery so that e.g. "clone --recurs ..."
doesn't error out because "clone" understands both "--recursive" and
"--recurse-submodules" to mean the same thing.
Initially "clone" just understood --recursive until the
--recurses-submodules alias was added in ccdd3da652 ("clone: Add the
--recurse-submodules option as alias for --recursive",
2010-11-04). Since bb62e0a99f ("clone: teach --recurse-submodules to
optionally take a pathspec", 2017-03-17) the longer form has been
promoted to the default.
But due to the way the options parsing machinery works this resulted
in the rather absurd situation of:
$ git clone --recurs [...]
error: ambiguous option: recurs (could be --recursive or --recurse-submodules)
Add OPT_ALIAS() to express this link between two or more options and use
it in git-clone. Multiple aliases of an option could be written as
OPT_ALIAS(0, "alias1", "original-name"),
OPT_ALIAS(0, "alias2", "original-name"),
...
The current implementation is not exactly optimal in this case. But we
can optimize it when it becomes a problem. So far we don't even have two
aliases of any option.
A big chunk of code is actually from Junio C Hamano.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For partial clones, doing a full connectivity check is wasteful; we skip
promisor objects (which, for a partial clone, is all known objects), and
enumerating them all to exclude them from the connectivity check can
take a significant amount of time on large repos.
At most, we want to make sure that we get the objects referred to by any
wanted refs. For partial clones, just check that these objects were
transferred.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5e3548ef16 ("fetch: send server options when using protocol v2",
2018-04-24) taught "fetch" the ability to send server options when using
protocol v2, but not "clone". This ability is triggered by "-o" or
"--server-option".
Teach "clone" the same ability, except that because "clone" already
has "-o" for another parameter, teach "clone" only to receive
"--server-option".
Explain in the documentation, both for clone and for fetch, that server
handling of server options are server-specific. This is similar to
receive-pack's handling of push options - currently, they are just sent
to hooks to interpret as they see fit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When communicating with a remote server or a subprocess, use
expanded numbers rather than numbers with scaling suffix in the
object filter spec (e.g. "limit:blob=1k" becomes
"limit:blob=1024").
Update the protocol docs to note that clients should always perform this
expansion, to allow for more compatibility between server
implementations.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.
* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec
The initial fetch during a clone doesn't transfer refs matching
additional fetch refspecs given on the command line as configuration
variables, e.g. '-c remote.origin.fetch=<refspec>'. This contradicts
the documentation stating that configuration variables specified via
'git clone -c <key>=<value> ...' "take effect immediately after the
repository is initialized, but before the remote history is fetched"
and the given example specifically mentions "adding additional fetch
refspecs to the origin remote". Furthermore, one-shot configuration
variables specified via 'git -c <key>=<value> clone ...', though not
written to the newly created repository's config file, live during the
lifetime of the 'clone' command, including the initial fetch. All
this implies that any fetch refspecs specified this way should already
be taken into account during the initial fetch.
The reason for this is that the initial fetch is not a fully fledged
'git fetch' but a bunch of direct calls into the fetch/transport
machinery with clone's own refs-to-refspec matching logic, which
bypasses parts of 'git fetch' processing configured fetch refspecs.
This logic only considers a single default refspec, potentially
influenced by options like '--single-branch' and '--mirror'. The
configured refspecs are, however, already read and parsed properly
when clone calls remote.c:remote_get(), but it never looks at the
parsed refspecs in the resulting 'struct remote'.
Modify clone to take the remote's configured fetch refspecs into
account to retrieve all matching refs during the initial fetch. Note
that we have to explicitly add the default fetch refspec to the
remote's refspecs, because at that point the remote only includes the
fetch refspecs specified on the command line.
Add tests to check that refspecs given both via 'git clone -c ...' and
'git -c ... clone' retrieve all refs matching either the default or
the additional refspecs, and that it works even when the user
specifies an alternative remote name via '--origin=<name>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_clone() declares two strbufs 'key' and 'value' on the same line,
suggesting that they are used to contruct a config variable's name and
value. However, this is not the case: 'key' is used to construct the
names of multiple config variables, while 'value' is never used as a
value for any of those config variables, or for any other config
variable for that matter, but only to contruct the default fetch
refspec.
Let's rename 'value' to 'default_refspec' to make the intent clearer.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".
This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.
In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.
This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" sometimes failed to update the remote-tracking refs,
which has been corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: unify ref in and out param
The wire-protocol v2 relies on the client to send "ref prefixes" to
limit the bandwidth spent on the initial ref advertisement. "git
clone" when learned to speak v2 forgot to do so, which has been
corrected.
* bw/clone-ref-prefixes:
clone: send ref-prefixes when using protocol v2
When a user fetches:
- at least one up-to-date ref and at least one non-up-to-date ref,
- using HTTP with protocol v0 (or something else that uses the fetch
command of a remote helper)
some refs might not be updated after the fetch.
This bug was introduced in commit 989b8c4452 ("fetch-pack: put shallow
info in output parameter", 2018-06-28) which allowed transports to
report the refs that they have fetched in a new out-parameter
"fetched_refs". If they do so, transport_fetch_refs() makes this
information available to its caller.
Users of "fetched_refs" rely on the following 3 properties:
(1) it is the complete list of refs that was passed to
transport_fetch_refs(),
(2) it has shallow information (REF_STATUS_REJECT_SHALLOW set if
relevant), and
(3) it has updated OIDs if ref-in-want was used (introduced after
989b8c4452).
In an effort to satisfy (1), whenever transport_fetch_refs()
filters the refs sent to the transport, it re-adds the filtered refs to
whatever the transport supplies before returning it to the user.
However, the implementation in 989b8c4452 unconditionally re-adds the
filtered refs without checking if the transport refrained from reporting
anything in "fetched_refs" (which it is allowed to do), resulting in an
incomplete list, no longer satisfying (1).
An earlier effort to resolve this [1] solved the issue by readding the
filtered refs only if the transport did not refrain from reporting in
"fetched_refs", but after further discussion, it seems that the better
solution is to revert the API change that introduced "fetched_refs".
This API change was first suggested as part of a ref-in-want
implementation that allowed for ref patterns and, thus, there could be
drastic differences between the input refs and the refs actually fetched
[2]; we eventually decided to only allow exact ref names, but this API
change remained even though its necessity was decreased.
Therefore, revert this API change by reverting commit 989b8c4452, and
make receive_wanted_refs() update the OIDs in the sought array (like how
update_shallow() updates shallow information in the sought array)
instead. A test is also included to show that the user-visible bug
discussed at the beginning of this commit message no longer exists.
[1] https://public-inbox.org/git/20180801171806.GA122458@google.com/
[2] https://public-inbox.org/git/86a128c5fb710a41791e7183207c4d64889f9307.1485381677.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
Teach clone to send a list of ref-prefixes, when using protocol v2, to
allow the server to filter out irrelevant references from the
ref-advertisement. This reduces wasted time and bandwidth when cloning
repositories with a larger number of references.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
The commit that introduced the partial clone feature - 548719fbdc
("clone: partial clone", 2017-12-08) - excluded connectivity checks
for partial clones, but this also meant that it is possible for a clone
to succeed, yet not have all objects either present or promised.
Specifically, if cloning with --filter=blob:none from a repository that
has a tag pointing to a blob, and the blob is not sent in the packfile,
the clone will pass, even if the blob is not referenced by any tree in
the packfile.
Turn on connectivity checks for partial clone.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make refspec parsing codepath more robust.
* ab/refspec-init-fix:
refspec: initalize `refspec_item` in `valid_fetch_refspec()`
refspec: add back a refspec_item_init() function
refspec: s/refspec_item_init/&_or_die/g
Expand the transport fetch method signature, by adding an output
parameter, to allow transports to return information about the refs they
have fetched. Then communicate shallow status information through this
mechanism instead of by modifying the input list of refs.
This does require clients to sometimes generate the ref map twice: once
from the list of refs provided by the remote (as is currently done) and
potentially once from the new list of refs that the fetch mechanism
provides.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the refspec_item_init() function introduced in
6d4c057859 ("refspec: introduce struct refspec", 2018-05-16) to
refspec_item_init_or_die().
This follows the convention of other *_or_die() functions, and is done
in preparation for making it a wrapper for a non-fatal variant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Convert 'cmd_clone()' to use 'refspec_item_init()' instead of relying on
the old 'parse_fetch_refspec()' to initialize a single refspec item.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate the struct alternate_object_database and all its related
functions to the object store as these functions are easier found in
that header. The migration is just a verbatim copy, no need to
include the object store header at any C file, because cache.h includes
repository.h which in turn includes the object-store.h
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach transport_get_remote_refs() to accept a list of ref prefixes,
which will be sent to the server for use in filtering when using
protocol v2. (This list will be ignored when not using protocol v2.)
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two parts of git-clone's setup logic check whether a
directory exists, and they both call stat directly with the
same scratch "struct stat" buffer. Let's pull that into a
helper, which has a few advantages:
- it makes the purpose of the stat calls more obvious
- it makes it clear that we don't care about the
information in "buf" remaining valid
- if we later decide to make the check more robust (e.g.,
complaining about non-directories), we can do it in one
place
Note that we could just use file_exists() for this, which
has identical code. But we specifically care about
directories, so this future-proofs us against that function
later getting more picky about seeing actual files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --shared" to borrow from a (secondary) worktree did not
work, even though "git clone --local" did. Both are now accepted.
* es/clone-shared-worktree:
clone: support 'clone --shared' from a worktree
Prior to commit a2d725b7bd ("Use an external program to implement
fetching with curl", 2009-08-05), if Git was compiled with NO_CURL, the
get_refs_list and fetch methods in struct transport might not be
populated, hence the checks in clone and fetch. After that commit, all
transports populate get_refs_list and fetch, making the checks in clone
and fetch redundant. Remove those checks.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When worktree functionality was originally implemented, the possibility
of 'clone --local' from within a worktree was overlooked, with the
result that the location of the "objects" directory of the source
repository was computed incorrectly, thus the objects could not be
copied or hard-linked by the clone. This shortcoming was addressed by
744e469755 (clone: allow --local from a linked checkout, 2015-09-28).
However, the related case of 'clone --shared' (despite being handled
only a few lines away from the 'clone --local' case) was not fixed by
744e469755, with a similar result of the "objects" directory location
being incorrectly computed for insertion into the 'alternates' file.
Fix this.
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in refs API implementation.
* mh/tidy-ref-update-flags:
refs: update some more docs to use "oid" rather than "sha1"
write_packed_entry(): take `object_id` arguments
refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING`
refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`
refs: tidy up and adjust visibility of the `ref_update` flags
ref_transaction_add_update(): remove a check
ref_transaction_update(): die on disallowed flags
prune_ref(): call `ref_transaction_add_update()` directly
files_transaction_prepare(): don't leak flags to packed transaction
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
Even after working with this code for years, I still see this constant
name as "ref node ref". Rename it to make it's meaning clearer.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert check_connected and the callbacks it takes to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the ref transaction code to use struct object_id. Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no longer any need to allocate and leak a `struct lock_file`.
The previous patch addressed an instance where we needed a minor tweak
alongside the trivial changes.
Deal with the remaining instances where we allocate and leak a struct
within a single function. Change them to have the `struct lock_file` on
the stack instead.
These instances were identified by running `git grep "^\s*struct
lock_file\s*\*"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
The function close_pack_fd() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
"git clone --config var=val" is a way to populate the
per-repository configuration file of the new repository, but it did
not work well when val is an empty string. This has been fixed.
* jn/clone-add-empty-config-from-command-line:
clone: handle empty config values in -c
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
copy_alternates() called fopen() without handling errors. By switching
to xfopen(), this bug is fixed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --config var=val" is a way to populate the
per-repository configuration file of the new repository, but it did
not work well when val is an empty string. This has been fixed.
* jn/clone-add-empty-config-from-command-line:
clone: handle empty config values in -c
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --config" uses the following incantation to add an item to
a config file, instead of replacing an existing value:
git_config_set_multivar_gently(key, value, "^$", 0)
As long as no existing value matches the regex ^$, that works as
intended and adds to the config. When a value is empty, though, it
replaces the existing value.
Noticed while trying to set credential.helper during a clone to use a
specific helper without inheriting from ~/.gitconfig and
/etc/gitconfig. That is, I ran
git clone -c credential.helper= \
-c credential.helper=myhelper \
https://example.com/repo
intending to produce the configuration
[credential]
helper =
helper = myhelper
Without this patch, the 'helper =' line is not included and the
credential helper from /etc/gitconfig gets used.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --no-tags option to clone without fetching any tags.
Without this change there's no easy way to clone a repository without
also fetching its tags.
When supplying --single-branch the primary remote branch will be
cloned, but in addition tags will be followed & retrieved. Now
--no-tags can be added --single-branch to clone a repository without
tags, and which only tracks a single upstream branch.
This option works without --single-branch as well, and will do a
normal clone but not fetch any tags.
Many git commands pay some fixed overhead as a function of the number
of references. E.g. creating ~40k tags in linux.git will cause a
command like `git log -1 >/dev/null` to run in over a second instead
of in a matter of milliseconds, in addition numerous other things will
slow down, e.g. "git log <TAB>" with the bash completion will slowly
show ~40k references instead of 1.
The user might want to avoid all of that overhead to simply use a
repository like that to browse the "master" branch, or something like
a CI tool might want to keep that one branch up-to-date without caring
about any other references.
Without this change the only way of accomplishing this was either by
manually tweaking the config in a fresh repository:
git init git &&
cat >git/.git/config <<EOF &&
[remote "origin"]
url = git@github.com:git/git.git
tagOpt = --no-tags
fetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
EOF
cd git &&
git pull
Which requires hardcoding the "master" name, which may not be the main
--single-branch would have retrieved, or alternatively by setting
tagOpt=--no-tags right after cloning & deleting any existing tags:
git clone --single-branch git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Which of course was also subtly buggy if --branch was pointed at a
tag, leaving the user in a detached head:
git clone --single-branch --branch v2.12.0 git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Now all this complexity becomes the much simpler:
git clone --single-branch --no-tags git@github.com:git/git.git
Or in the case of cloning a single tag "branch":
git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.11 had a minor regression in "merge --ff-only" that competed
with another process that simultanously attempted to update the
index. We used to explain what went wrong with an error message,
but the new code silently failed. The error message has been
resurrected.
* jc/lock-report-on-error:
lockfile: LOCK_REPORT_ON_ERROR
hold_locked_index(): align error handling with hold_lockfile_for_update()
wt-status: implement opportunisitc index update correctly
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
"deepen by excluding" does not make sense because excluding a revision
does not deepen a repository; it makes the repository more shallow.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" of a local repository can be done at the filesystem
level, but the codepath did not check errors while copying and
adjusting the file that lists alternate object stores.
* jk/clone-copy-alternates-fix:
clone: detect errors in normalize_path_copy
"git clone" of a local repository can be done at the filesystem
level, but the codepath did not check errors while copying and
adjusting the file that lists alternate object stores.
* jk/clone-copy-alternates-fix:
clone: detect errors in normalize_path_copy
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
When we are copying the alternates from the source
repository, if we find a relative path that is too deep for
the source (e.g., "../../../objects" from "/repo.git/objects"),
then normalize_path_copy will report an error and leave
trash in the buffer, which we will add to our new alternates
file. Instead, let's detect the error, print a warning, and
skip copying that alternate.
There's no need to die. The relative path is probably just
broken cruft in the source repo. If it turns out to have
been important for accessing some objects, we rely on other
parts of the clone to detect that, just as they would with a
missing object in the source repo itself (though note that
clones with "-s" are inherently local, which may do fewer
object-quality checks in the first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init" tried to record core.worktree in the repository's
'config' file when GIT_WORK_TREE environment variable was set and
it was different from where GIT_DIR appears as ".git" at its top,
but the logic was faulty when .git is a "gitdir:" file that points
at the real place, causing trouble in working trees that are
managed by "git worktree". This has been corrected.
* nd/init-core-worktree-in-multi-worktree-world:
init: kill git_link variable
init: do not set unnecessary core.worktree
init: kill set_git_dir_init()
init: call set_git_dir_init() from within init_db()
init: correct re-initialization from a linked worktree
The next commit requires that set_git_dir_init() must be called before
init_db(). Let's make sure nobody can do otherwise.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning with "--recursive", we'd generally expect
submodules to show progress reports if the main clone did,
too.
In older versions of git, this mostly worked out of the
box. Since we show progress by default when stderr is a tty,
and since the child clones inherit the parent stderr, then
both processes would come to the same decision by default.
If the parent clone was asked for "--quiet", we passed down
"--quiet" to the child. However, if stderr was not a tty and
the user specified "--progress", we did not propagate this
to the child.
That's a minor bug, but things got much worse when we
switched recently to submodule--helper's update_clone
command. With that change, the stderr of the child clones
are always connected to a pipe, and we never output
progress at all.
This patch teaches git-submodule and git-submodule--helper
how to pass down an explicit "--progress" flag when cloning.
The clone command then decides to propagate that flag based
on the cloning decision made earlier (which takes into
account isatty(2) of the parent process, existing --progress
or --quiet flags, etc). Since the child processes always run
without a tty on stderr, we don't have to worry about
passing an explicit "--no-progress"; it's the default for
them.
This fixes the recent loss of progress during recursive
clones. And as a bonus, it makes:
git clone --recursive --progress ... 2>&1 | cat
work by triggering progress explicitly in the children.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--recursive` and `--reference` is given, it is reasonable to
expect that the submodules are created with references to the submodules
of the given alternate for the superproject.
An initial attempt to do this was presented to the mailing list, which
used flags that are passed around ("--super-reference") that instructed
the submodule clone to look for a reference in the submodules of the
referenced superproject. This is not well thought out, as any further
`submodule update` should also respect the initial setup.
When a new submodule is added to the superproject and the alternate
of the superproject does not know about that submodule yet, we rather
error out informing the user instead of being unclear if we did or did
not use a submodules alternate.
To solve this problem introduce new options that store the configuration
for what the user wanted originally.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to try to create alternates for submodules,
but they might not exist in the referenced superproject. So add a way
to skip the non existing references and report them.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we introduce optional references; To better distinguish
between optional and required references we rename the variable.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to determine if a path is suitable as an
alternate from other commands than builtin/clone. Move the checking
functionality of `add_one_reference` to `compute_alternate_path` that is
defined in cache.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the initial connectivity check for a cloned
repository can be slow, 0781aa4 (clone: let the user know
when check_everything_connected is run, 2013-05-03) added a
"fake" progress meter; we simply say "Checking connectivity"
when it starts, and "done" at the end, with nothing between.
Since check_connected() now knows how to do a real progress
meter, we can drop our fake one and use that one instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The number of variants of check_everything_connected has
grown over the years, so that the "real" function takes
several possibly-zero, possibly-NULL arguments. We hid the
complexity behind some wrapper functions, but this doesn't
scale well when we want to add new options.
If we add more wrapper variants to handle the new options,
then we can get a combinatorial explosion when those options
might be used together (right now nobody wants to use both
"shallow" and "transport" together, so we get by with just a
few wrappers).
If instead we add new parameters to each function, each of
which can have a default value, then callers who want the
defaults end up with confusing invocations like:
check_everything_connected(fn, 0, data, -1, 0, NULL);
where it is unclear which parameter is which (and every
caller needs updated when we add new options).
Instead, let's add a struct to hold all of the optional
parameters. This is a little more verbose for the callers
(who have to declare the struct and fill it in), but it
makes their code much easier to follow, because every option
is named as it is set (and unused options do not have to be
mentioned at all).
Note that we could also stick the iteration function and its
callback data into the option struct, too. But since those
are required for each call, by avoiding doing so, we can let
very simple callers just pass "NULL" for the options and not
worry about the struct at all.
While we're touching each site, let's also rename the
function to check_connected(). The existing name was quite
long, and not all of the wrappers even used the full name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
In v2.9.0, we prematurely flipped the default to force cloning
submodules shallowly, when the superproject is getting cloned
shallowly. This is likely to fail when the upstream repositories
submodules are cloned from a repository that is not prepared to
serve histories that ends at a commit that is not at the tip of a
branch, and we know the world is not yet ready.
Use a safer default to clone the submodules fully, unless the user
tells us that she knows that the upstream repository of the
submodules are willing to cooperate with "--shallow-submodules"
option.
Noticed-by: Vadim Eisenberg <VADIME@il.ibm.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two types of string_lists: those that own the
string memory, and those that don't. You can tell the
difference by the strdup_strings flag, and one should use
either STRING_LIST_INIT_DUP, or STRING_LIST_INIT_NODUP as an
initializer.
Historically, the normal all-zeros initialization has
corresponded to the NODUP case. Many sites use no
initializer at all, and that works as a shorthand for that
case. But for a reader of the code, it can be hard to
remember which is which. Let's be more explicit and actually
have each site declare which type it means to use.
This is a fairly mechanical conversion; I assumed each site
was correct as-is, and just switched them all to NODUP.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a shallow clone of a repository with submodules, the depth
argument does not influence the submodules, i.e. the submodules are done
as non-shallow clones. It is unclear what the best default is for the
depth of submodules of a shallow clone, so we need to have the possibility
to do all kinds of combinations:
* shallow super project with shallow submodules
e.g. build bots starting always from scratch. They want to transmit
the least amount of network data as well as using the least amount
of space on their hard drive.
* shallow super project with unshallow submodules
e.g. The superproject is just there to track a collection of repositories
and it is not important to have the relationship between the repositories
intact. However the history of the individual submodules matter.
* unshallow super project with shallow submodules
e.g. The superproject is the actual project and the submodule is a
library which is rarely touched.
The new switch to select submodules to be shallow or unshallow supports
all of these three cases.
It is easy to transition from the first to the second case by just
unshallowing the submodules (`git submodule foreach git fetch
--unshallow`), but it is not possible to transition from the second to the
first case (as we would have already transmitted the non shallow over
the network). That is why we want to make the first case the default in
case of a shallow super project. This leads to the inconvenience in the
second case with the shallow super project and unshallow submodules,
as you need to pass `--no-shallow-submodules`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
Just pass it along to "git submodule update", which may pick reasonable
defaults if you don't specify an explicit number.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The desired default behavior for `git_config_set` is to die
whenever an error occurs. Dying is the default for a lot of
internal functions when failures occur and is in this case the
right thing to do for most callers as otherwise we might run into
inconsistent repositories without noticing.
As some code may rely on the actual return values for
`git_config_set` we still require the ability to invoke these
functions without aborting. Rename the existing `git_config_set`
functions to `git_config_set_gently` to keep them available for
those callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clone command does not check for error codes returned by
`git_config_set` functions. This may cause the user to end up
with an inconsistent repository without any indication with what
went wrong.
Fix this problem by dying with an error message when we are
unable to write the configuration files to disk.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many commands that read files that are expected to contain text
that is generated (or can be edited) by the end user to control
their behaviour (e.g. "git grep -f <filename>") have been updated
to be more tolerant to lines that are terminated with CRLF (they
used to treat such a line to contain payload that ends with CR,
which is usually not what the users expect).
* jc/peace-with-crlf:
test-sha1-array: read command stream with strbuf_getline()
grep: read -f file with strbuf_getline()
send-pack: read list of refs with strbuf_getline()
column: read lines with strbuf_getline()
cat-file: read batch stream with strbuf_getline()
transport-helper: read helper response with strbuf_getline()
clone/sha1_file: read info/alternates with strbuf_getline()
remote.c: read $GIT_DIR/remotes/* with strbuf_getline()
ident.c: read /etc/mailname with strbuf_getline()
rev-parse: read parseopt spec with strbuf_getline()
revision: read --stdin with strbuf_getline()
hash-object: read --stdin-paths with strbuf_getline()
The preliminary clean-up for jc/peace-with-crlf topic.
* jc/strbuf-getline:
strbuf: give strbuf_getline() to the "most text friendly" variant
checkout-index: there are only two possible line terminations
update-index: there are only two possible line terminations
check-ignore: there are only two possible line terminations
check-attr: there are only two possible line terminations
mktree: there are only two possible line terminations
strbuf: introduce strbuf_getline_{lf,nul}()
strbuf: make strbuf_getline_crlf() global
strbuf: miniscule style fix
$GIT_OBJECT_DIRECTORY/info/alternates is a text file that can be
edited with a DOS editor. We do not want to use the real path with
CR appended at the end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unlikely that we would fail to create or update a
symbolic ref (especially HEAD), but if we do, we should
notice and complain. Note that there's no need to give more
details in our error message; create_symref will already
have done so.
While we're here, let's also fix a minor memory leak in
clone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
The "--reference" option is not the only way to provide a repository
to borrow objects from. A repository that borrows from another
repository can be cloned with "clone --local" and the resulting
repository will borrow from the same repository, which the user
may want to "--dissociate" from.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --dissociate" runs a big "git repack" process at the
end, and it helps to close file descriptors that are open on the
packs and their idx files before doing so on filesystems that
cannot remove a file that is still open.
* js/clone-dissociate:
clone --dissociate: avoid locking pack files
sha1_file.c: add a function to release all packs
sha1_file: consolidate code to close a pack's file descriptor
t5700: demonstrate a Windows file locking issue with `git clone --dissociate`
When `git clone` is asked to dissociate the repository from the
reference repository whose objects were used, it is quite possible that
the pack files need to be repacked. In that case, the pack files need to
be deleted that were originally hard-links to the reference repository's
pack files.
On platforms where a file cannot be deleted if another process still
holds a handle on it, we therefore need to take pains to release all
pack files and indexes before dissociating.
This fixes https://github.com/git-for-windows/git/issues/446
The test case to demonstrate the breakage technically does not need to
be run on Linux or MacOSX. It won't hurt, either, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
"git clone $URL", when cloning from a site whose sole purpose is to
host a single repository (hence, no path after <scheme>://<site>/),
tried to use the site name as the new repository name, but did not
remove username or password when <site> part was of the form
<user>@<pass>:<host>. The code is taught to redact these.
* ps/guess-repo-name-at-root:
clone: abort if no dir name could be guessed
clone: do not use port number as dir name
clone: do not include authentication data in guessed dir
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
The get_repo_path function calls mkpath() and then does some
non-trivial operations on it, like calling
is_git_directory() and read_gitfile(). These are actually
OK (they do not use more pathname static buffers
themselves), but it takes a fair bit of work to verify.
Let's use our own strbuf to store the path, and we can
simply reuse it for each iteration of the loop (we can even
avoid rewriting the beginning part, since we are trying a
series of suffixes).
To make the strbuf cleanup easier, we split out a thin
wrapper. As a bonus, this wrapper can factor out the
canonicalization that happens in all of the early-return
code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to various components of the URI being stripped off it may
happen that we fail to guess a directory name. We currently error
out with a message that it is impossible to create the working
tree '' in such cases. Instead, error out early with a sensible
error message hinting that a directory name should be specified
manually on the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains a port number and the URI's path component is
empty we fail to guess a sensible directory name. E.g. cloning a
repository 'ssh://example.com:2222/' we guess a directory name
'2222' where we would want the hostname only, e.g. 'example.com'.
We need to take care to not drop trailing port-like numbers in
certain cases. E.g. when cloning a repository 'foo/bar:2222.git'
we want to guess the directory name '2222' instead of 'bar'.
Thus, we have to first check the stripped URI for path separators
and only strip port numbers if there are path separators present.
This heuristic breaks when cloning a repository 'bar:2222.git',
though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains authentication data and the URI's path
component is empty, we fail to guess a sensible directory name.
E.g. cloning a repository 'ssh://user:password@example.com/' we
guess a directory name 'password@example.com' where we would want
the hostname only, e.g. 'example.com'.
The naive way of just adding '@' as a path separator would break
cloning repositories like 'foo/bar@baz.git' (which would
currently become 'bar@baz' but would then become 'baz' only).
Instead fix this by first dropping the scheme and then greedily
scanning for an '@' sign until we find the first path separator.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7e837c6 (clone: simplify string handling in
guess_dir_name(), 2015-07-09) changed clone to use
strip_suffix instead of hand-rolled pointer manipulation.
However, strip_suffix will strip from the end of a
NUL-terminated string, and we may have already stripped some
characters (like directory separators, or "/.git"). This
leads to commands like:
git clone host:foo.git/
failing to strip the ".git".
We must instead convert our pointer arithmetic into a
computed length and feed that to strip_suffix_mem, which will
then reduce the length further for us.
It would be nicer if we could drop the pointer manipulation
entirely, and just continually strip using strip_suffix. But
that doesn't quite work for two reasons:
1. The early suffixes we're stripping are not constant; we
need to look for is_dir_sep, which could be one of
several characters.
2. Mid-way through the stripping we compute the pointer
"start", which shows us the beginning of the pathname.
Which really give us two lengths to work with: the
offset from the start of the string, and from the start
of the path. By using pointers for the early part, we
can just compute the length from "start" when we need
it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up refs API and make "git clone" less intimate with the
implementation detail.
* mh/init-delete-refs-api:
delete_ref(): use the usual convention for old_sha1
cmd_update_ref(): make logic more straightforward
update_ref(): don't read old reference value before delete
check_branch_commit(): make first parameter const
refs.h: add some parameter names to function declarations
refs: move the remaining ref module declarations to refs.h
initial_ref_transaction_commit(): check for ref D/F conflicts
initial_ref_transaction_commit(): check for duplicate refs
refs: remove some functions from the module's public interface
initial_ref_transaction_commit(): function for initial ref creation
repack_without_refs(): make function private
prune_refs(): use delete_refs()
prune_remote(): use delete_refs()
delete_refs(): bail early if the packed-refs file cannot be rewritten
delete_refs(): make error message more generic
delete_refs(): new function for the refs API
delete_ref(): handle special case more explicitly
remove_branches(): remove temporary
delete_ref(): move declaration to refs.h
"git clone" uses shortcuts when creating the initial set of
references:
* It writes them directly to packed-refs.
* It doesn't lock the individual references (though it does lock the
packed-refs file).
* It doesn't check for refname conflicts between two new references or
between one new reference and any hypothetical old ones.
* It doesn't create reflog entries for the reference creations.
This functionality was implemented in builtin/clone.c. But really that
file shouldn't have such intimate knowledge of how references are
stored. So provide a new function in the refs API,
initial_ref_transaction_commit(), which can be used for initial
reference creation. The new function is based on the ref_transaction
interface.
This means that we can make some other functions private to the refs
module. That will be done in a followup commit.
It would seem to make sense to add a test here that there are no
existing references, because that is how the function *should* be
used. But in fact, the "testgit" remote helper appears to call it
*after* having set up refs/remotes/<name>/HEAD and
refs/remotes/<name>/master, so we can't be so strict. For now, the
function trusts its caller to only call it when it makes sense. Future
commits will add some more limited sanity checks.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
These options are intimately related, so it makes sense to
list them nearby in the "-h" output (they are already
adjacent in the manpage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only does this save us having to implement a custom
callback, but it handles "--no-reference" in the usual way
(to clear the list).
The generic callback does copy the string, which we don't
technically need, but that should not hurt anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Commit 2879bc3 made the progress and verbosity options sent to remote helper
earlier than they previously were. But nothing else after that would send
updates if the value is changed later on with transport_set_verbosity.
While for fetch and push, transport_set_verbosity is the first thing that
is done after creating the transport, it was not the case for clone. So
commit 2879bc3 broke changing progress and verbosity for clone, for urls
requiring a remote helper only (so, not git:// urls, for instance).
Moving transport_set_verbosity to just after the transport is created
works around the issue.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
We do not usually end our errors with a full stop, but it
looks especially bad when you use die_errno, which adds a
colon, like:
fatal: could not create work tree dir 'foo'.: No such file or directory
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If clone fails, we generally try to clean up any directories
we've created. We do this by installing an atexit handler,
so that we don't have to manually trigger cleanup. However,
since we install this after touching the filesystem, any
errors between our initial mkdir() and our atexit() call
will result in us leaving a crufty directory around.
We can fix this by moving our atexit() call earlier. It's OK
to do it before the junk_work_tree variable is set, because
remove_junk makes sure the variable is initialized. This
means we "activate" the handler by assigning to the
junk_work_tree variable, which we now bump down to just
after we call mkdir(). We probably do not want to do it
before, because a plausible reason for mkdir() to fail is
EEXIST (i.e., we are racing with another "git init"), and we
would not want to remove their work.
OTOH, this is probably not that big a deal; we will allow
cloning into an empty directory (and skip the mkdir), which
is already racy (i.e., one clone may see the other's empty
dir and start writing into it). Still, it does not hurt to
err on the side of caution here.
Note that writing into junk_work_tree and junk_git_dir after
installing the handler is also technically racy, as we call
our handler on an async signal. Depending on the platform,
we could see a sheared write to the variables. Traditionally
we have not worried about this, and indeed we already do
this later in the function. If we want to address that, it
can come as a separate topic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow us build with NO_PTHREADS=NoThanks compilation option.
* eb/no-pthreads:
Handle atexit list internaly for unthreaded builds
pack-objects: set number of threads before checking and warning
index-pack: fix compilation with NO_PTHREADS
Wrap atexit()s calls on unthreaded builds to handle callback list
internally.
This is needed because on unthreaded builds, asyncs inherits parent's
atexit() list, that gets run as soon as the async exit()s (and again at
the end of async's parent process). That led to remove temporary files
too early.
Also remove a by-atexit-callback guard against this kind of issue in
clone.c, as this patch makes it redundant.
Fixes test 5537 (temporary shallow file vanished before unpack-objects
could open it)
BTW remove an unused variable in shallow.c.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Etienne Buira <etienne.buira@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
