The parse-options API responds to "git cmd -h" by listing the option
flag (padded to the USAGE_OPTS_WIDTH column), followed by USAGE_GAP
(set to 2) whitespaces, followed by the help text. If the flags
part does not fit within the USAGE_OPTS_WIDTH, the help text is given
on its own line. Imagine that "@" below depicts the USAGE_OPTS_WIDTH'th
column, and "#" are for the usage help text, the output may look
like this:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--very-long-option=<number>
description of the flag '--very-long-option'
This is all good and nice in principle, but it becomes awkward when
the flags part is just one column over the limit and forces a line
break. See the description of the "--almost" option below:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--almost=<num>
description of the flag '--almost'
--very-long-option=<number>
description of the flag '--very-long-option'
If we allow shrinking the gap to a single whitespace only in such a
case, we would instead get:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--almost=<num> description of the flag '--almost'
--very-long-option=<number>
description of the flag '--very-long-option'
and the boundary between the flags and their descriptions does not
become any harder to see, while saving precious vertical screen real
estate.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The help text for the --tags option was split into two option[]
entries, which was a hacky way to give two lines of help text (the
second entry did not have either short or long help, and there was
no way to invoke its entry---it was there only for the help text).
As we now support multi-line text in the option help, let's make
the second line of the help a proper second line and remove the
hacky second entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-h" triggers the short-help in a command that implements its
option parsing using the parse-options API, the option help text is
shown with a single fprintf() as a long line. When the text is
multi-line, the second and subsequent lines are not left padded,
that breaks the alignment across options.
Borrowing the idea from the advice API where its hint strings are
shown with (localized) "hint:" prefix, let's internally split the
(localized) help text into lines, and showing the first line, pad
the remaining lines to align.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case 'configure --with-iconv=no' is used, NO_ICONV is not saved to
config.status and thus git is built with iconv support.
Always save NO_ICONV to config.status to honor what user selected
during configure step.
Signed-off-by: Andreas Herrmann <aherrmann@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if 'configure --with-curl=no' was run, curl support is used,
because library detection overwrites it. Avoid this overwrite.
Configure should obey what the user has specified.
Signed-off-by: Andreas Herrmann <aherrmann@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if 'configure --with-expat=no' was run, expat support is used,
because library detection overwrites it. Avoid this overwrite.
Configure should obey what the user has specified.
Signed-off-by: Andreas Herrmann <aherrmann@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --no-sparse" behaved exactly the same way as "git
show-branch --sparse", which did not make any sense. This was
because it used a variable "dense" initialized to 1 by default to
give "non sparse" behaviour, and OPT_SET_INT() to set the varilable
to 0 in response to the "--sparse" option. Unfortunately,
OPT_SET_INT() sets 0 to the given variable when the option is
negated.
Flip the polarity of the variable "dense" by renaming it to "sparse"
and initializing it to 0, and have OPT_SET_INT() set the variable to
1 when "--sparse" is given. This way, "--no-sparse" would set 0 to
the variable and would give us the "dense" behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now we have introduced OPT_IPVERSION(), tweak its implementation so
that "git clone", "git fetch", and "git push" reject the negated
form of "Use only IP version N" options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line option parsing for "git clone", "git fetch", and
"git push" have duplicated implementations of parsing "--ipv4" and
"--ipv6" options, by having two OPT_SET_INT() for "ipv4" and "ipv6".
Introduce a new OPT_IPVERSION() macro and use it in these three
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the command line parser for "git branch --all" forgets to use
PARSE_OPT_NONEG, it accepted "git branch --no-all", and then passed
a nonsense value to the underlying machinery, leading to a fatal
error "filter_refs: invalid type". The "--remotes" option had
exactly the same issue.
Catch the unsupported options early in the option parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options "--keep-cr" and its negation trigger
OPT_SET_INT_F(PARSE_OPT_NONEG) to set a variable to 1 and 0
respectively. Using OPT_SET_INT() to implement the positive variant
that sets the variable to 1 without specifying PARSE_OPT_NONEG gives
us the negative variant to set it to 0 for free.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "PATTERN FORMAT" section, all the other pattern elements are
shown as `monospace` literals inside "double quoted" strings. Do
the same for the explanation of a slash to make it consistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 61fdbcf98b (ls-tree: migrate to parse-options, 2009-11-13) git
ls-tree has accepted the option --no-full-name, but it does the same
as --full-name, contrary to convention. That's because it's defined
using OPT_SET_INT with a value of 0, where the negative variant sets
0 as well.
Turn --no-full-name into the opposite of --full-name by using OPT_BOOL
instead and storing the option's status directly in a variable named
"full_name" instead of in negated form in "chomp_prefix".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck --no-progress" still spewed noise from the commit-graph
subsystem, which has been corrected.
* tb/fsck-no-progress:
commit-graph.c: avoid duplicated progress output during `verify`
commit-graph.c: pass progress to `verify_one_commit_graph()`
commit-graph.c: iteratively verify commit-graph chains
commit-graph.c: extract `verify_one_commit_graph()`
fsck: suppress MIDX output with `--no-progress`
fsck: suppress commit-graph output with `--no-progress`
The recent change to "git repack" made it react less nicely when a
leftover .idx file that no longer has the corresponding .pack file
in the repository, which has been corrected.
* tb/repack-cleanup:
builtin/repack.c: avoid dir traversal in `collect_pack_filenames()`
builtin/repack.c: only repack `.pack`s that exist
Among four examples, only this one used "double quoted" sample
patterns, but all others marked up the patterns in `monospace`.
Signed-off-by: Johan Ruokangas <johan@latehours.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We return the oid that matched, but the sole caller only cares whether
we matched anything at all. This is mostly academic, since there's only
one caller, but the lifetime of the returned pointer is not immediately
clear. Sometimes it points to an oid in a tag struct, which should live
forever. And sometimes to the oid passed in, which only lives as long as
the each_ref_fn callback we're called from.
Simplify this to a boolean return which is more direct and obvious. As a
bonus, this lets us avoid the weird pattern of overwriting our "oid"
parameter in the loop (since we now only refer to the tagged oid one
time, and can just inline the call to get it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling --points-at, we have to try to peel each ref to see if
it's a tag that points at a requested oid. We start this process by
calling parse_object() on the oid pointed to by each ref.
The cost of parsing each object adds up, especially in an output that
doesn't otherwise need to open the objects at all. Ideally we'd use
peel_iterated_oid() here, which uses the cached information in the
packed-refs file. But we can't, because our --points-at must match not
only the fully peeled value, but any interim values (so if tag A points
to tag B which points to commit C, we should match --points-at=B, but
peel_iterated_oid() will only tell us about C).
So the best we can do (absent changes to the packed-refs peel traits) is
to avoid parsing non-tags. The obvious way to do that is to call
oid_object_info() to check the type before parsing. But there are a few
gotchas there, like checking if the object has already been parsed.
Instead we can just tell parse_object() that we are OK skipping the hash
check, which lets it turn on several optimizations. Commits can be
loaded via the commit graph (so it's both fast and we have the benefit
of the parsed data if we need it later at the output stage). Blobs are
not loaded at all. Trees are still loaded, but it's rather rare to have
a ref point directly to a tree (and since this is just an optimization,
kicking in 99% of the time is OK).
Even though we're paying for an extra lookup, the cost to avoid parsing
the non-tags is a net benefit. In my git.git repository with 941 tags
and 1440 other refs pointing to commits, this significantly cuts the
runtime:
Benchmark 1: ./git.old for-each-ref --points-at=HEAD
Time (mean ± σ): 26.8 ms ± 0.5 ms [User: 24.5 ms, System: 2.2 ms]
Range (min … max): 25.9 ms … 29.2 ms 107 runs
Benchmark 2: ./git.new for-each-ref --points-at=HEAD
Time (mean ± σ): 9.1 ms ± 0.3 ms [User: 6.8 ms, System: 2.2 ms]
Range (min … max): 8.6 ms … 10.2 ms 308 runs
Summary
'./git.new for-each-ref --points-at=HEAD' ran
2.96 ± 0.10 times faster than './git.old for-each-ref --points-at=HEAD'
In a repository that is mostly annotated tags, we'd expect less
improvement (we might still skip a few object loads, but that's balanced
by the extra lookups). In my clone of linux.git, which has 782 tags and
3 branches, the run-time is about the same (it's actually ~1% faster on
average after this patch, but that's within the run-to-run noise).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we peel tags to check if they match a --points-at oid, we
recursively parse the tagged object to see if it is also a tag. But
since the tag itself tells us the type of the object it points to (and
even gives us the appropriate object struct via its "tagged" member), we
can use that directly.
We do still have to make sure to call parse_tag() before looking at each
tag. This is redundant for the outermost tag (since we did call
parse_object() to find its type), but that's OK; parse_tag() is smart
enough to make this a noop when the tag has already been parsed.
In my clone of linux.git, with 782 tags (and only 3 non-tags), this
yields a significant speedup (bringing us back where we were before the
commit before this one started recursively dereferencing tags):
Benchmark 1: ./git.old for-each-ref --points-at=HEAD --format="%(refname)"
Time (mean ± σ): 20.3 ms ± 0.5 ms [User: 11.1 ms, System: 9.1 ms]
Range (min … max): 19.6 ms … 21.5 ms 141 runs
Benchmark 2: ./git.new for-each-ref --points-at=HEAD --format="%(refname)"
Time (mean ± σ): 11.4 ms ± 0.2 ms [User: 6.3 ms, System: 5.0 ms]
Range (min … max): 11.0 ms … 12.2 ms 250 runs
Summary
'./git.new for-each-ref --points-at=HEAD --format="%(refname)"' ran
1.79 ± 0.05 times faster than './git.old for-each-ref --points-at=HEAD --format="%(refname)"'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tags are dereferenced until reaching a different object type to handle
nested tags, e.g. on checkout. In contrast, "git tag --points-at=..."
fails to list such nested tags because only one level of indirection is
obtained in filter_refs(). Implement the recursive dereferencing for the
"--points-at" option when filtering refs to unify the behaviour.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files '(attr:X)D/'" that triggers the common prefix
optimization codepath failed to read from "D/.gitattributes",
which has been corrected.
* jc/pathspec-match-with-common-prefix:
dir: match "attr" pathspec magic with correct paths
t6135: attr magic with path pattern
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
Code snippets in a tutorial document no longer compiled after
recent header shuffling, which have been corrected.
* vd/adjust-mfow-doc-to-updated-headers:
docs: add necessary headers to Documentation/MFOW.txt
"git diff --no-index" learned to read from named pipes as if they
were regular files, to allow "git diff <(process) <(substitution)"
some shells support.
* pw/diff-no-index-from-named-pipes:
diff --no-index: support reading from named pipes
t4054: test diff --no-index with stdin
diff --no-index: die on error reading stdin
diff --no-index: refuse to compare stdin to a directory
Use the now common skip_prefix() cascade instead of a case statement to
parse the strftime(3) format in strbuf_addftime(). skip_prefix() parses
the "fmt" pointer and advances it appropriately, making additional
pointer arithmetic unnecessary. The resulting code is more compact and
consistent with most other strbuf_expand_step() loops.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a test introduced by 26c9c03f0a (ref-filter: add new "signature"
atom, 2023-06-04) the file named "file" is added by a setup step that
requires GPG and modified by a second setup step that requires GPGSSH.
Systems lacking the first prerequisite skip the initial setup step and
then "git commit -a" in the second one doesn't find the modified file.
Add it explicitly.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"imap-send" codepaths got cleaned up to get rid of unused
parameters.
* jk/imap-send-unused-variable-cleanup:
imap-send: drop unused fields from imap_cmd_cb
imap-send: drop unused parameter from imap_cmd_cb callback
imap-send: use server conf argument in setup_curl()
"git bugreport" tests did not test what it wanted to test, which
has been corrected.
* ma/t0091-fixup:
t0091-bugreport.sh: actually verify some content of report
The "git for-each-ref" family of commands learned placeholders
related to GPG signature verification.
* ks/ref-filter-signature:
ref-filter: add new "signature" atom
t/lib-gpg: introduce new prereq GPG2
Background: The guidance to "base your work on the oldest branch that
your change is relevant to" was added in d0c26f0f56 (SubmittingPatches:
Add new section about what to base work on, 2010-04-19). That commit
also added the bullet points which describe the scenarios where one
would use one of the following named branches: "maint", "master",
"next", and "seen" ("pu" in the original as that was the name of this
branch before it was renamed, per 828197de8f (docs: adjust for the
recent rename of `pu` to `seen`, 2020-06-25)). The guidance was probably
taken from existing similar language introduced in the "Merge upwards"
section of gitworkflows in f948dd8992 (Documentation: add manpage about
workflows, 2008-10-19).
Summary: This change simplifies the guidance by pointing users to just
"maint" or "master". But it also gives an explanation of why that is
preferred and what is meant by preferring "older" branches (which might
be confusing to some because "old" here is meant in relative terms
between these named branches, not in terms of the age of the branches
themselves). We also add an example to illustrate why it would be a bad
idea to use "next" as a starting point, which may not be so obvious to
new contributors.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase
and unless it targets the `master` branch (which is the default),
mark your patches as such.
is tightly packed with several things happening in just two lines of
text. It also feels like it is not that important because of the terse
treatment. This is a problem because (1) it has the potential to confuse
new contributors, and (2) it may be glossed over for those skimming the
docs.
Emphasize and elaborate on this guidance by promoting it to its own
separate paragraph.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It could be that a suitable branch does not exist, so instead just use
the phrase "starting point". Technically speaking the starting point
would be a commit (not a branch) anyway.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion around subsystems disrupts the flow of discussion in the
surrounding area, which only deals with starting points used for the
git.git project. So move this bullet point out to the end.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I noticed this test was producing output like
```
t4002-diff-basic.sh: test_expect_successdiff can read from stdin: not found
```
which is rather odd. Investigation shows an error of shell syntax:
foo'abc' is the same as fooabc to the shell. Perhaps obviously, this is
not a valid command for the test.
I am surprised this doesn't count as an error in the test, but that
accounts for it going unnoticed.
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, ensure that we don't overflow
when trying to read an OID out of an existing commit-graph during
verification.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, ensure that we don't overflow
when trying to read an existing OID while writing a new commit-graph.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging two commit graphs, ensure that we don't attempt to merge
two graphs which, when combined, have more total commits than the 32-bit
unsigned maximum.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, ensure that we don't overflow
when choosing how to split and merge different layers of the
commit-graph.
In particular, avoid a potential overflow between `size_mult` and
`num_commits`, as well as a potential overflow between the number of
commits currently in the merged graph, and the number of commits in the
graph about to be merged.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, ensure that we don't overflow
when computing an offset into the commit_data chunk when the (relative)
graph position exceeds 2^32-1/GRAPH_DATA_WIDTH.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, ensure that we don't overflow
when the lex_index of the commit we are trying to fill out exceeds
2^32-1/(g->hash_len+16).
The other hunk touched in this patch is not susceptible to overflow,
since an explicit cast is made to a 64-bit unsigned value. For clarity
and consistency with the rest of the commits in this series, avoid a
tricky to reason about cast, and use `st_mult()` directly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, ensure that we don't overflow
in a few spots within `fill_commit_graph_info()`:
- First, when computing an offset into the commit data chunk, which
can occur when the `lex_index` of the item we're looking up exceeds
2^32-1/GRAPH_DATA_WIDTH.
- A similar issue when computing the generation date offset for
commits with `lex_index` greater than 2^32-1/4. Note that in
practice this will never overflow, since the left-hand operand is
from calling `sizeof(...)` and is thus already a `size_t`. But wrap
that in an `st_mult()` to make it clear that we intend to perform
this computation using 64-bit operands.
- Finally, a nearly identical issue as above when computing an offset
into the `generation_data_overflow` chunk.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>