When a changed-path Bloom filter has either zero, or more than a
certain number (commonly 512) of entries, the commit-graph machinery
encodes it as "missing". More specifically, it sets the indices adjacent
in the BIDX chunk as equal to each other to indicate a "length 0"
filter; that is, that the filter occupies zero bytes on disk.
This has heretofore been fine, since the commit-graph machinery has no
need to care about these filters with too few or too many changed paths.
Both cases act like no filter has been generated at all, and so there is
no need to store them.
In a subsequent commit, however, the commit-graph machinery will learn
to only compute Bloom filters for some commits in the current
commit-graph layer. This is a change from the current implementation
which computes Bloom filters for all commits that are in the layer being
written. Critically for this patch, only computing some of the Bloom
filters means adding a third state for length 0 Bloom filters: zero
entries, too many entries, or "hasn't been computed".
It will be important for that future patch to distinguish between "not
representable" (i.e., zero or too-many changed paths), and "hasn't been
computed". In particular, we don't want to waste time recomputing
filters that have already been computed.
To that end, change how we store Bloom filters in the "computed but not
representable" category:
- Bloom filters with no entries are stored as a single byte with all
bits low (i.e., all queries to that Bloom filter will return
"definitely not")
- Bloom filters with too many entries are stored as a single byte with
all bits set high (i.e., all queries to that Bloom filter will
return "maybe").
These rules are sufficient to not incur a behavior change by changing
the on-disk representation of these two classes. Likewise, no
specification changes are necessary for the commit-graph format, either:
- Filters that were previously empty will be recomputed and stored
according to the new rules, and
- old clients reading filters generated by new clients will interpret
the filters correctly and be none the wiser to how they were
generated.
Clients will invoke the Bloom machinery in more cases than before, but
this can be addressed by returning a NULL filter when all bits are set
high. This can be addressed in a future patch.
Note that this does increase the size of on-disk commit-graphs, but far
less than other proposals. In particular, this is generally more
efficient than storing a bitmap for which commits haven't computed their
Bloom filters. Storing a bitmap incurs a penalty of one bit per commit,
whereas storing explicit filters as above incurs a penalty of one byte
per too-large or empty commit.
In practice, these boundary commits likely occupy a small proportion of
the overall number of commits, and so the size penalty is likely smaller
than storing a bitmap for all commits.
See, for example, these relative proportions of such boundary commits
(collected by SZEDER Gábor):
| Percentage of | commit-graph | |
| commits modifying | file size | |
├────────┬──────────────┼───────────────────┤ pct. |
| 0 path | >= 512 paths | before | after | change |
┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤
| android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % |
| cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % |
| cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % |
| elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % |
| gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % |
| gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % |
| git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % |
| glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % |
| go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % |
| homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % |
| homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % |
| jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % |
| linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % |
| llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % |
| rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % |
| rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % |
| tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % |
| webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % |
(where the above increase is determined by computing a non-split
commit-graph before and after this patch).
Given that these projects are all "large" by commit count, the storage
cost by writing these filters explicitly is negligible. In the most
extreme example, android-base (which has 494,848 commits at the time of
writing) would have its commit-graph increase by a modest 68.4 KB.
Finally, a test to exercise filters which contain too many changed path
entries will be introduced in a subsequent patch.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Suggested-by: Jakub Narębski <jnareb@gmail.com>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'get_or_compute_bloom_filter()' needs to compute a Bloom filter
from scratch, it looks to the default 'struct bloom_filter_settings' in
order to determine the maximum number of changed paths, number of bits
per entry, and so on.
All of these values have so far been constant, and so there was no need
to pass in a pointer from the caller (eg., the one that is stored in the
'struct write_commit_graph_context').
Start passing in a 'struct bloom_filter_settings *' instead of using the
default values to respect graph-specific settings (eg., in the case of
setting 'GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS').
In order to have an initialized value for these settings, move its
initialization to earlier in the commit-graph write.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'get_bloom_filter' takes a flag to control whether it will compute a
Bloom filter if the requested one is missing. In the next patch, we'll
add yet another parameter to this method, which would force all but one
caller to specify an extra 'NULL' parameter at the end.
Instead of doing this, split 'get_bloom_filter' into two functions:
'get_bloom_filter' and 'get_or_compute_bloom_filter'. The former only
looks up a Bloom filter (and does not compute one if it's missing,
thus dropping the 'compute_if_not_present' flag). The latter does
compute missing Bloom filters, with an additional parameter to store
whether or not it needed to do so.
This simplifies many call-sites, since the majority of existing callers
to 'get_bloom_filter' do not want missing Bloom filters to be computed
(so they can drop the parameter entirely and use the simpler version of
the function).
While we're at it, instrument the new 'get_or_compute_bloom_filter()'
with counters in the 'write_commit_graph_context' struct which store
the number of filters that we did and didn't compute, as well as filters
that were truncated.
It would be nice to drop the 'compute_if_not_present' flag entirely,
since all remaining callers of 'get_or_compute_bloom_filter' pass it as
'1', but this will change in a future patch and hence cannot be removed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, we assume that there is a fixed constant describing the
maximum number of changed paths we are willing to store in a Bloom
filter.
Prepare for that to (at least partially) not be the case by making it a
member of the 'struct bloom_filter_settings'. This will be helpful in
the subsequent patches by reducing the size of test cases that exercise
storing too many changed paths, as well as preparing for an eventual
future in which this value might change.
This patch alone does not cause newly generated Bloom filters to use
a custom upper-bound on the maximum number of changed paths a single
Bloom filter can hold, that will occur in a later patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses the 'core.commitGraph' configuration value to control whether
or not the commit graph is used when parsing commits or performing a
traversal.
Now that commit-graphs can also contain a section for changed-path Bloom
filters, administrators that already have commit-graphs may find it
convenient to use those graphs without relying on their changed-path
Bloom filters. This can happen, for example, during a staged roll-out,
or in the event of an incident.
Introduce 'commitGraph.readChangedPaths' to control whether or not Bloom
filters are read. Note that this configuration is independent from both:
- 'core.commitGraph', to allow flexibility in using all parts of a
commit-graph _except_ for its Bloom filters.
- The '--changed-paths' option for 'git commit-graph write', to allow
reading and writing Bloom filters to be controlled independently.
When the variable is set, pretend as if no Bloom data was specified at
all. This avoids adding additional special-casing outside of the
commit-graph internals.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, some commit-graph internals will want access to
'r->settings', but we only have the 'struct object_directory *'
corresponding to that repository.
Add an additional parameter to pass the repository around in more
places.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in the code often need a pointer to the commit-graph's
'struct bloom_filter_settings', in which case they often take the value
from the top-most commit-graph.
In the non-split case, this works as expected. In the split case,
however, things get a little tricky. Not all layers in a chain of
incremental commit-graphs are required to themselves have Bloom data,
and so whether or not some part of the code uses Bloom filters depends
entirely on whether or not the top-most level of the commit-graph chain
has Bloom filters.
This has been the behavior since Bloom filters were introduced, and has
been codified into the tests since a759bfa9ee (t4216: add end to end
tests for git log with Bloom filters, 2020-04-06). In fact, t4216.130
requires that Bloom filters are not used in exactly the case described
earlier.
There is no reason that this needs to be the case, since it is perfectly
valid for commits in an earlier layer to have Bloom filters when commits
in a newer layer do not.
Since Bloom settings are guaranteed in practice to be the same for any
layer in a chain that has Bloom data, it is sufficient to traverse the
'->base_graph' pointer until either (1) a non-null 'struct
bloom_filter_settings *' is found, or (2) until we are at the root of
the commit-graph chain.
Introduce a 'get_bloom_filter_settings()' function that does just this,
and use it instead of purely dereferencing the top-most graph's
'->bloom_filter_settings' pointer.
While we're at it, add an additional test in t5324 to guard against code
in the commit-graph writing machinery that doesn't correctly handle a
NULL 'struct bloom_filter *'.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
The code to produce progress output from "git commit-graph --write"
had a few breakages, which have been fixed.
* sg/commit-graph-progress-fix:
commit-graph: fix "Writing out commit graph" progress counter
commit-graph: fix progress of reachable commits
When "fetch.writeCommitGraph" configuration is set in a shallow
repository and a fetch moves the shallow boundary, we wrote out
broken commit-graph files that do not match the reality, which has
been corrected.
* tb/fix-persistent-shallow:
commit.c: don't persist substituted parents when unshallowing
76ffbca71a (commit-graph: write Bloom filters to commit graph file,
2020-04-06) added two delayed progress lines to writing the Bloom
filter index and data chunk. This is wrong, because a single common
progress is used while writing all chunks, which is not updated while
writing these two new chunks, resulting in incomplete-looking "done"
lines:
Expanding reachable commits in commit graph: 888679, done.
Computing commit changed paths Bloom filters: 100% (888678/888678), done.
Writing out commit graph in 6 passes: 66% (3554712/5332068), done.
Use the common 'struct progress' instance while writing the Bloom
filter chunks as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To display a progress line while iterating over all refs,
d335ce8f24 (commit-graph.c: show progress of finding reachable
commits, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around a
for_each_ref() invocation. Alas, the stop_progress() call ended up at
the wrong place, after write_commit_graph(), which does all the
commit-graph computation and writing, and has several progress lines
of its own. Consequently, that new
Collecting referenced commits: 123
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
Expanding reachable commits in commit graph: 344786, done.
Computing commit changed paths Bloom filters: 100% (344786/344786), done.
Collecting referenced commits: 154, done.
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (data.progress)' condition
protecting the stop_progress() call, because that function is prepared
to handle a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In my experience while experimenting with new commit-graph chunks,
early versions of the corresponding new write_commit_graph_my_chunk()
functions are, sadly but not surprisingly, often buggy, and write more
or less data than they are supposed to, especially if the chunk size
is not directly proportional to the number of commits. This then
causes all kinds of issues when reading such a bogus commit-graph
file, raising the question of whether the writing or the reading part
happens to be buggy this time.
Let's catch such issues early, already when writing the commit-graph
file, and check that each write_graph_chunk_*() function wrote the
amount of data that it was expected to, and what has been encoded in
the Chunk Lookup table. Now that all commit-graph chunks are written
in a loop we can do this check in a single place for all chunks, and
any chunks added in the future will get checked as well.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In write_commit_graph_file() we now have one block of code filling the
array of 'struct chunk_info' with the IDs and sizes of chunks to be
written, and an other block of code calling the functions responsible
for writing individual chunks. In case of optional chunks like Extra
Edge List an Base Graphs List there is also a condition checking
whether that chunk is necessary/desired, and that same condition is
repeated in both blocks of code. Other, newer chunks have similar
optional conditions.
Eliminate these repeated conditions by storing the function pointers
responsible for writing individual chunks in the 'struct chunk_info'
array as well, and calling them in a loop to write the commit-graph
file. This will open up the possibility for a bit of foolproofing in
the following patch.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the write_graph_chunk_*() helper functions to have the same
signature:
- Return an int error code from all these functions.
write_graph_chunk_base() already has an int error code, now the
others will have one, too, but since they don't indicate any
error, they will always return 0.
- Drop the hash size parameter of write_graph_chunk_oids() and
write_graph_chunk_data(); its value can be read directly from
'the_hash_algo' inside these functions as well.
This opens up the possibility for further cleanups and foolproofing in
the following two patches.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changed-path Bloom filters were released in v2.27.0, but have a
significant drawback. A user can opt-in to writing the changed-path
filters using the "--changed-paths" option to "git commit-graph write"
but the next write will drop the filters unless that option is
specified.
This becomes even more important when considering the interaction with
gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of
features.experimental). These config options trigger commit-graph writes
that the user did not signal, and hence there is no --changed-paths
option available.
Allow a user that opts-in to the changed-path filters to persist the
property of "my commit-graph has changed-path filters" automatically. A
user can drop filters using the --no-changed-paths option.
In the process, we need to be extremely careful to match the Bloom
filter settings as specified by the commit-graph. This will allow future
versions of Git to customize these settings, and the version with this
change will persist those settings as commit-graphs are rewritten on
top.
Use the trace2 API to signal the settings used during the write, and
check that output in a test after manually adjusting the correct bytes
in the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_bloom_filter() method is a bit complicated in some parts where
it does not need to be. In particular, it needs to return a NULL filter
only when compute_if_not_present is zero AND the filter data cannot be
loaded from a commit-graph file. This currently happens by accident
because the commit-graph does not load changed-path Bloom filters from
an existing commit-graph when writing a new one. This will change in a
later patch.
Also clean up some style issues while we are here.
One side-effect of returning a NULL filter is that the filters that are
reported as "too large" will now be reported as NULL insead of length
zero. This case was not properly covered before, so add a test. Further,
remote the counting of the zero-length filters from revision.c and the
trace2 logs.
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
43d3561 (commit-graph write: don't die if the existing graph is corrupt,
2019-03-25) introduced the GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD environment
variable. This was created to verify that commit-graph was not loaded
when writing a new non-incremental commit-graph.
An upcoming change wants to load a commit-graph in some valuable cases,
but we want to maintain that we don't trust the commit-graph data when
writing our new file. Instead of dying on load, instead die if we ever
try to parse a commit from the commit-graph. This functionally verifies
the same intended behavior, but allows a more advanced feature in the
next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Place an instance of struct bloom_settings into the struct
write_commit_graph_context. This allows simplifying the function
prototype of write_graph_chunk_bloom_data(). This will allow us
to combine the function prototypes and use function pointers to
simplify write_commit_graph_file().
By using a pointer, we can later replace the settings to match those
that exist in the current commit-graph, in case a future Git version
allows customization of these parameters.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier patch, multiple struct acccesses to `graph_pos` and
`generation` were auto-converted to multiple method calls.
Since the values are fixed and commit-slab access costly, we would be
better off with storing the values as a local variable and reusing it.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove members `graph_pos` and `generation` from the struct commit.
The default assignments in init_commit_node() are no longer valid,
which is fine as the slab helpers return appropriate default values and
the assignments are removed.
We will replace existing use of commit->generation and commit->graph_pos
by commit_graph_data_slab helpers using
`contrib/coccinelle/commit.cocci'.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The struct commit is used in many contexts. However, members
`generation` and `graph_pos` are only used for commit-graph related
operations and otherwise waste memory.
This wastage would have been more pronounced as we transition to
generation number v2, which uses 64-bit generation number instead of
current 32-bits.
As they are often accessed together, let's introduce struct
commit_graph_data and move them to a commit_graph_data slab.
While the overall test suite runs just as fast as master,
(series: 26m48s, master: 27m34s, faster by 2.87%), certain commands
like `git merge-base --is-ancestor` were slowed by 40% as discovered
by Szeder Gábor [1]. After minimizing commit-slab access, the slow down
persists but is closer to 20%.
Derrick Stolee believes the slow down is attributable to the underlying
algorithm rather than the slowness of commit-slab access [2] and we will
follow-up in a later series.
[1]: https://lore.kernel.org/git/20200607195347.GA8232@szeder.dev/
[2]: https://lore.kernel.org/git/13db757a-9412-7f1e-805c-8a028c4ab2b1@gmail.com/
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify the 'chunk_ids' and 'chunk_sizes' arrays into an array of
'struct chunk_info'. This will allow more cleanups in the following
patches.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In write_commit_graph_file() one block of code fills the array of
chunk IDs, another block of code fills the array of chunk offsets,
then the chunk IDs and offsets are written to the Chunk Lookup table,
and finally a third block of code writes the actual chunks. In case
of optional chunks like Extra Edge List and Base Graphs List there is
also a condition checking whether that chunk is necessary/desired, and
that same condition is repeated in all those three blocks of code.
This patch series is about to add more optional chunks, so there would
be even more repeated conditions.
Those chunk offsets are relative to the beginning of the file, so they
inherently depend on the size of the Chunk Lookup table, which in turn
depends on the number of chunks that are to be written to the
commit-graph file. IOW at the time we set the first chunk's ID we
can't yet know its offset, because we don't yet know how many chunks
there are.
Simplify this by initially filling an array of chunk sizes, not
offsets, and calculate the offsets based on the chunk sizes only
later, while we are writing the Chunk Lookup table. This way we can
fill the arrays of chunk IDs and sizes in one go, eliminating one set
of repeated conditions.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Chunk Lookup table stores the chunks' starting offset in the
commit-graph file, not their sizes. Consequently, the size of a chunk
can only be calculated by subtracting its offset from the offset of
the subsequent chunk (or that of the terminating label). This is
currenly implemented in a bit complicated way: as we iterate over the
entries of the Chunk Lookup table, we check the id of each chunk and
store its starting offset, then we check the id of the last seen chunk
and calculate its size using its previously saved offset. At the
moment there is only one chunk for which we calculate its size, but
this patch series will add more, and the repeated chunk id checks are
not that pretty.
Instead let's read ahead the offset of the next chunk on each
iteration, so we can calculate the size of each chunk right away,
right where we store its starting offset.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we iterate over all entries of the Chunk Lookup table we make
sure that we don't attempt to read past the end of the mmap-ed
commit-graph file, and check in each iteration that the chunk ID and
offset we are about to read is still within the mmap-ed memory region.
However, these checks in each iteration are not really necessary,
because the number of chunks in the commit-graph file is already known
before this loop from the just parsed commit-graph header.
So let's check that the commit-graph file is large enough for all
entries in the Chunk Lookup table before we start iterating over those
entries, and drop those per-iteration checks. While at it, take into
account the size of everything that is necessary to have a valid
commit-graph file, i.e. the size of the header, the size of the
mandatory OID Fanout chunk, and the size of the signature in the
trailer as well.
Note that this necessitates the change of the error message as well,
and, consequently, have to update the 'detect incorrect chunk count'
test in 't5318-commit-graph.sh' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our CodingGuidelines says that it's sufficient to include one of
'git-compat-util.h' and 'cache.h', but both 'commit-graph.c' and
'commit-graph.h' include both. Let's include only 'git-compat-util.h'
to loose a bunch of unnecessary dependencies; but include 'hash.h',
because 'commit-graph.h' does require the definition of 'struct
object_id'.
'commit-graph.h' explicitly includes 'repository.h' and
'string-list.h', but only needs the declaration of a few structs from
them. Drop these includes and forward-declare the necessary structs
instead.
'commit-graph.c' includes 'dir.h', but doesn't actually use anything
from there, so let's drop that #include as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file format specifies that the chunks may be in any
order. However, if the OID Lookup chunk happens to be the last one in
the file, then any command attempting to access the commit-graph data
will fail with:
fatal: invalid commit position. commit-graph is likely corrupt
In this case the error is wrong, the commit-graph file does conform to
the specification, but the parsing of the Chunk Lookup table is a bit
buggy, and leaves the field holding the number of commits in the
commit-graph zero-initialized.
The number of commits in the commit-graph is determined while parsing
the Chunk Lookup table, by dividing the size of the OID Lookup chunk
with the hash size. However, the Chunk Lookup table doesn't actually
store the size of the chunks, but it stores their starting offset.
Consequently, the size of a chunk can only be calculated by
subtracting the starting offsets of that chunk from the offset of the
subsequent chunk, or in case of the last chunk from the offset
recorded in the terminating label. This is currenly implemented in a
bit complicated way: as we iterate over the entries of the Chunk
Lookup table, we check the ID of each chunk and store its starting
offset, then we check the ID of the last seen chunk and calculate its
size using its previously saved offset if necessary (at the moment
it's only necessary for the OID Lookup chunk). Alas, while parsing
the Chunk Lookup table we only interate through the "real" chunks, but
never look at the terminating label, thus don't even check whether
it's necessary to calulate the size of the last chunk. Consequently,
if the OID Lookup chunk is the last one, then we don't calculate its
size and turn don't run the piece of code determining the number of
commits in the commit graph, leaving the field holding that number
unchanged (i.e. zero-initialized), eventually triggering the sanity
check in load_oid_from_graph().
Fix this by iterating through all entries in the Chunk Lookup table,
including the terminating label.
Note that this is the minimal fix, suitable for the maintenance track.
A better fix would be to simplify how the chunk sizes are calculated,
but that is a more invasive change, less suitable for 'maint', so that
will be done in later patches.
This additional flexibility of scanning more chunks breaks a test for
"git commit-graph verify" so alter that test to mutate the commit-graph
to have an even lower chunk count.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7c5c9b9c57 (commit-graph: error out on invalid commit oids in
'write --stdin-commits', 2019-08-05), the commit-graph builtin dies on
receiving non-commit OIDs as input to '--stdin-commits'.
This behavior can be cumbersome to work around in, say, the case of
piping 'git for-each-ref' to 'git commit-graph write --stdin-commits' if
the caller does not want to cull out non-commits themselves. In this
situation, it would be ideal if 'git commit-graph write' wrote the graph
containing the inputs that did pertain to commits, and silently ignored
the remainder of the input.
Some options have been proposed to the effect of '--[no-]check-oids'
which would allow callers to have the commit-graph builtin do just that.
After some discussion, it is difficult to imagine a caller who wouldn't
want to pass '--no-check-oids', suggesting that we should get rid of the
behavior of complaining about non-commit inputs altogether.
If callers do wish to retain this behavior, they can easily work around
this change by doing the following:
git for-each-ref --format='%(objectname) %(objecttype) %(*objecttype)' |
awk '
!/commit/ { print "not-a-commit:"$1 }
/commit/ { print $1 }
' |
git commit-graph write --stdin-commits
To make it so that valid OIDs that refer to non-existent objects are
indeed an error after loosening the error handling, perform an extra
lookup to make sure that object indeed exists before sending it to the
commit-graph internals.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous handful of commits, both 'git commit-graph write
--reachable' and '--stdin-commits' learned to peel tags down to the
commits which they refer to before passing them into the commit-graph
internals.
This makes the call to 'lookup_commit_reference_gently()' inside of
'fill_oids_from_commits()' a noop, since all OIDs are commits by that
point.
As such, remove the call entirely, as well as the progress meter, which
has been split and moved out to the callers in the aforementioned
earlier commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While iterating references (to discover the set of commits to write to
the commit-graph with 'git commit-graph write --reachable'),
'add_ref_to_set' can save 'fill_oids_from_commits()' some time by
peeling the references beforehand.
Move peeling out of 'fill_oids_from_commits()' and into
'add_ref_to_set()' to use 'peel_ref()' instead of 'deref_tag()'. Doing
so allows the commit-graph machinery to use the peeled value from
'$GIT_DIR/packed-refs' instead of having to load and parse tags.
While we're at it, discard non-commit objects reachable from ref tips.
This would be done automatically by 'fill_oids_from_commits()', but such
functionality will be removed in a subsequent patch after the call to
'lookup_commit_reference_gently' is dropped (at which point a non-commit
object in the commits oidset will become an error).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git commit-graph write --reachable' is invoked, the commit-graph
machinery calls 'for_each_ref()' to discover the set of reachable
commits.
Right now the 'add_ref_to_set' callback is not doing anything other than
adding an OID to the set of known-reachable OIDs. In a subsequent
commit, 'add_ref_to_set' will presumptively peel references. This
operation should be fast for repositories with an up-to-date
'$GIT_DIR/packed-refs', but may be slow in the general case.
So that it doesn't appear that 'git commit-graph write' is idling with
'--reachable' in the slow case, add a progress meter to provide some
output in the meantime.
In general, we don't expect a progress meter to appear at all, since
peeling references with a 'packed-refs' file is quick. If it's slow and
we do show a progress meter, the subsequent 'fill_oids_from_commits()'
will be fast, since all of the calls to
'lookup_commit_reference_gently()' will be no-ops.
Both progress meters are delayed, so it is unlikely that more than one
will appear. In either case, this intermediate state will go away in a
handful of patches, at which point there will be at most one progress
meter.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the files commit-graph subsystem keeps on disk did not
correctly honor the core.sharedRepository settings and some were
left read-write.
* tb/commit-graph-perm-bits:
commit-graph.c: make 'commit-graph-chain's read-only
commit-graph.c: ensure graph layers respect core.sharedRepository
commit-graph.c: write non-split graphs as read-only
lockfile.c: introduce 'hold_lock_file_for_update_mode'
tempfile.c: introduce 'create_tempfile_mode'
In subsequent patches, we are going to update a progress meter when
'add_ref_to_set()' is called, and need a convenient way to pass a
'struct progress *' in from the caller.
Introduce 'refs_cb_data' as a catch-all for parameters that
'add_ref_to_set' may need, and wrap the existing single parameter in
that struct.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fuzzer running on the entry point provided by fuzz-commit-graph.c
revealed a memory leak when parse_commit_graph() creates a struct
bloom_filter_settings and then returns early due to error. Fix that
error by always freeing that struct first (if it exists) before
returning early due to error.
While making that change, I also noticed another possible memory leak -
when the BLOOMDATA chunk is provided but not BLOOMINDEXES. Also fix that
error.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame" learns to take advantage of the "changed-paths" Bloom
filter stored in the commit-graph file.
* ds/blame-on-bloom:
test-bloom: check that we have expected arguments
test-bloom: fix some whitespace issues
blame: drop unused parameter from maybe_changed_path
blame: use changed-path Bloom filters
tests: write commit-graph with Bloom filters
revision: complicated pathspecs disable filters
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
The commit-graph code exhausted file descriptors easily when it
does not have to.
* tb/commit-graph-fd-exhaustion-fix:
commit-graph: close descriptors after mmap
commit-graph.c: gracefully handle file descriptor exhaustion
t/test-lib.sh: make ULIMIT_FILE_DESCRIPTORS available to tests
commit-graph.c: don't use discarded graph_name in error
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a previous commit, we made incremental graph layers read-only by
using 'git_mkstemp_mode' with permissions '0444'.
There is no reason that 'commit-graph-chain's should be modifiable by
the user, since they are generated at a temporary location and then
atomically renamed into place.
To ensure that these files are read-only, too, use
'hold_lock_file_for_update_mode' with the same read-only permission
bits, and let the umask and 'adjust_shared_perm' take care of the rest.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-layered commit-graphs use 'adjust_shared_perm' to make the
commit-graph file readable (or not) to a combination of the user, group,
and others.
Call 'adjust_shared_perm' for split-graph layers to make sure that these
also respect 'core.sharedRepository'. The 'commit-graph-chain' file
already respects this configuration since it uses
'hold_lock_file_for_update' (which calls 'adjust_shared_perm' eventually
in 'create_tempfile_mode').
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, Git learned 'hold_lock_file_for_update_mode' to
allow the caller to specify the permission bits (prior to further
adjustment by the umask and shared repository permissions) used when
acquiring a temporary file.
Use this in the commit-graph machinery for writing a non-split graph to
acquire an opened temporary file with permissions read-only permissions
to match the split behavior. (In the split case, Git uses
git_mkstemp_mode' for each of the commit-graph layers with permission
bits '0444').
One can notice this discrepancy when moving a non-split graph to be part
of a new chain. This causes a commit-graph chain where all layers have
read-only permission bits, except for the base layer, which is writable
for the current user.
Resolve this discrepancy by using the new
'hold_lock_file_for_update_mode' and passing the desired permission
bits.
Doing so causes some test fallout in t5318 and t6600. In t5318, this
occurs in tests that corrupt a commit-graph file by writing into it. For
these, 'chmod u+w'-ing the file beforehand resolves the issue. The
additional spot in 'corrupt_graph_verify' is necessary because of the
extra 'git commit-graph write' beforehand (which *does* rewrite the
commit-graph file). In t6600, this is caused by copying a read-only
commit-graph file into place and then trying to replace it. For these,
make these files writable.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit-graph write --expire-time=<timestamp>" did not use the
given timestamp correctly, which has been corrected.
* ds/commit-graph-expiry-fix:
commit-graph: fix buggy --expire-time option