It only has one caller, not worth keeping just for convenience.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small step towards making files-backend work as a non-main ref store
using the newly added store-aware API.
For the record, `join` and `nm` on refs.o and files-backend.o tell me
that files-backend no longer uses functions that default to
get_main_ref_store().
I'm not yet comfortable at the idea of removing
files_assert_main_repository() (or converting REF_STORE_MAIN to
REF_STORE_WRITE). More staring and testing is required before that can
happen. Well, except peel_ref(). I'm pretty sure that function is safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transaction struct now takes a ref store at creation and will
operate on that ref store alone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is intended to replace *_submodule() refs API. It provides
a ref store for a specific submodule, which can be operated on by a new
set of refs API.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend.c is unlearning submodules. Instead of having a specific
check for submodules to see what operation is allowed, files backend
now takes a set of flags at init. Each operation will check if the
required flags is present before performing.
For now we have four flags: read, write and odb access. Main ref store
has all flags, obviously, while submodule stores are read-only and have
access to odb (*).
The "main" flag stays because many functions in the backend calls
frontend ones without a ref store, so these functions always target the
main ref store. Ideally the flag should be gone after ref-store-aware
api is in place and used by backends.
(*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag
out. At least t3404 would fail. The "have access to odb" in submodule is
a bit hacky since we don't know from he whether add_submodule_odb() has
been called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callers to this function already require that they are in a
git repository, but there is an exception: "git apply" uses
has_sha1_file to avoid work if the result of applying a binary
patch is already present in the repository. When run outside any
repository, this produces an error:
fatal: BUG: setup_git_env called without repository
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One message appears twice in the translations and the only
difference is a dot at the end. So add this dot to make
the messages being identical.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The left and right base directories were pointed to the buf field of
two strbufs, which were subject to change.
A contrived test case shows the problem where a file with a long enough
name to force the strbuf to grow is up-to-date (hence the code path is
used where the work tree's version of the file is reused), and then a
file that is not up-to-date needs to be written (hence the code path is
used where checkout_entry() uses the previously recorded base_dir that
is invalid by now).
Let's just copy the base_dir strings for use with checkout_entry(),
never touch them until the end, and release them then. This is an easily
verifiable fix (as opposed to the next-obvious alternative: to re-set
base_dir after every loop iteration).
This fixes https://github.com/git-for-windows/git/issues/1124
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff understands "--ours", "--theirs" and "--base" for files with
conflicts. But so far they were not documented for the central diff
command but only for diff-files.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy-init codepath will not be exercised uniless threaded. Skip
the entire test on a single-core box. Also replace a hard-coded
constant of 2000 (number of cache entries to manifacture for tests)
with a variable with a human readable name.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty line should stop any pending in-body headers, and start the
actual body parsing.
This also modifies the original test for the in-body headers to actually
have a real commit body that starts with spaces, and changes the test to
check that the long line matches _exactly_, and doesn't get extra data
from the body.
Fixes:6b4b013f1884 ("mailinfo: handle in-body header continuations")
Cc: Jonathan Tan <jonathantanmy@google.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "push --recurse-submodules" to propagate, if given a name as remote, the
provided remote and refspec recursively to the pushes performed in the
submodules. The push will therefore only succeed if all submodules have a
remote with such a name configured.
Note that "push --recurse-submodules" with a path or URL as remote will not
propagate the remote or refspec and instead use the default remote and refspec
configured in the submodule, preserving the current behavior.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'push-check' subcommand to submodule--helper which is used to
check if the provided remote and refspec can be used as part of a push
operation in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch needs access to the 'parse_push_refspec()' function so
let's export the function so other modules can use it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach push --recurse-submodules to propagate push-options recursively to
the pushes performed in the submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define a new task in .travis.yml that triggers a test session on
Windows run elsewhere.
* ls/travis-relays-for-windows-ci:
travis-ci: build and test Git on Windows
The default behaviour of "git log" in an interactive session has
been changed to enable "--decorate".
* ah/log-decorate-default-to-auto:
log: if --decorate is not given, default to --decorate=auto
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.
This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)
This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.
Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There isn't any obvious reason for the 'struct string_list push_options'
and 'struct string_list_item *item' to be marked as static, so unmark
them as being static. Also, clear the push_options string_list to
prevent memory leaking.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
List the fields in order of appearance in the command output.
Signed-off-by: Mostyn Bramley-Moore <mostyn@antipode.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we notice that we have a local copy of an incoming
object, we compare the two objects to make sure we haven't
found a collision. Before we get to the actual object
bytes, though, we compare the type and size from
sha1_object_info().
If our local object is corrupted, then the type will be
OBJ_BAD, which obviously will not match the incoming type,
and we'll report "SHA1 COLLISION FOUND" (with capital
letters and everything). This is confusing, as the problem
is not a collision but rather local corruption. We should
report that instead (just like we do if reading the rest of
the object content fails a few lines later).
Note that we _could_ just ignore the error and mark it as a
non-collision. That would let you "git fetch" to replace a
corrupted object. But it's not a very reliable method for
repairing a repository. The earlier want/have negotiation
tries to get the other side to omit objects we already have,
and it would not realize that we are "missing" this
corrupted object. So we're better off complaining loudly
when we see corruption, and letting the user take more
drastic measures to repair (like making a full clone
elsewhere and copying the pack into place).
Note that the test sets transfer.unpackLimit in the
receiving repository so that we use index-pack (which is
what does the collision check). Normally for such a small
push we'd use unpack-objects, which would simply try to
write the loose object, and discard the new one when we see
that there's already an old one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sha1_loose_object_info() finds that a loose object file
cannot be stat(2)ed or mmap(2)ed, it returns -1 to signal an
error to the caller. However, if it found that the loose
object file is corrupt and the object data cannot be used
from it, it stuffs OBJ_BAD into "type" field of the
object_info, but returns zero (i.e., success), which can
confuse callers.
This is due to 052fe5eac (sha1_loose_object_info: make type
lookup optional, 2013-07-12), which switched the return to a
strict success/error, rather than returning the type (but
botched the return).
Callers of regular sha1_object_info() don't notice the
difference, as that function returns the type (which is
OBJ_BAD in this case). However, direct callers of
sha1_object_info_extended() see the function return success,
but without setting any meaningful values in the object_info
struct, leading them to access potentially uninitialized
memory.
The easiest way to see the bug is via "cat-file -s", which
will happily ignore the corruption and report whatever
value happened to be in the "size" variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like we did in 0d1d6e50 ("t/t7003: replace \t with literal tab
in sed expression", 2010-08-12), avoid writing "\t" for HT in sed
scripts, which is not portable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add check for the end of the entries for the thread partition.
Add test for lazy init name hash with specific directory structure
The lazy init hash name was causing a buffer overflow when the last
entry in the index was multiple folder deep with parent folders that
did not have any files in them.
This adds a test for the boundary condition of the thread partitions
with the folder structure that was triggering the buffer overflow.
The fix was to check if it is the last entry for the thread partition
in the handle_range_dir and not try to use the next entry in the cache.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 068c77a5 ("builtin/send-pack.c: use parse_options API",
2015-08-19), there is no external user of this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the structure and functions have changed names, update the code
examples and the documentation. Rename the file to match the new name
of the API.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function by changing the declaration and definition and
applying the following semantic patch to update the callers:
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2.hash)
+ sha1_array_lookup(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2->hash)
+ sha1_array_lookup(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a very small number of callers which don't already use struct
object_id. Convert them.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our struct child_process already has its own argv_array.
Let's use that to avoid having to format options into
separate buffers.
Note that we'll need to declare the child process outside of
the run_service_command() helper to do this. But that opens
up a further simplification, which is that the helper can
append to our argument list, saving each caller from
specifying "." manually.
Signed-off-by: Jeff King <peff@peff.net>
We probe the "17/" loose object directory for auto-gc, and
use a local buffer to format the path. We can just use
git_path() for this. It handles paths of any length
(reducing our error handling). And because we feed the
result straight to a system call, we can just use the static
variant.
Note that git_path also knows the string "objects/" is
special, and will replace it with git_object_directory()
when necessary.
Another alternative would be to use sha1_file_name() for the
pretend object "170000...", but that ends up being more
hassle for no gain, as we have to truncate the final path
component.
Signed-off-by: Jeff King <peff@peff.net>
We can use xsnprintf to do our truncation check with less
code. The error message isn't as specific, but the point is
that this isn't supposed to trigger in the first place
(because our buffer is big enough to handle any int).
Signed-off-by: Jeff King <peff@peff.net>
These calls to snprintf should always succeed, because their
input is small and fixed. Let's use xsnprintf to make sure
this is the case (and to make auditing for actual truncation
easier).
These could be candidates for turning into heap buffers, but
they fall into a few broad categories that make it not worth
doing:
- formatting single numbers is simple enough that we can
see the result should fit
- the size of a sha1 is likewise well-known, and I didn't
want to cause unnecessary conflicts with the ongoing
process to convert these constants to GIT_MAX_HEXSZ
- the interface for curl_errorstr is dictated by curl
Signed-off-by: Jeff King <peff@peff.net>
We'd prefer to avoid unchecked snprintf calls because
truncation can lead to unexpected results.
These are all cases where truncation shouldn't ever happen,
because the input to snprintf is fixed in size. That makes
them candidates for xsnprintf(), but it's simpler still to
just use the heap, and then nobody has to wonder if "100" is
big enough.
We'll use xstrfmt() where possible, and a strbuf when we need
the resulting size or to reuse the same buffer in a loop.
Signed-off-by: Jeff King <peff@peff.net>
After receive-pack reads the pack header from the client, it
feeds the already-read part to index-pack and unpack-objects
via their --pack-header command-line options. To do so, we
format it into a fixed buffer, then duplicate it into the
child's argv_array.
Our buffer is long enough to handle any possible input, so
this isn't wrong. But it's more complicated than it needs to
be; we can just argv_array_pushf() the final value and avoid
the intermediate copy. This drops the magic number and is
more efficient, too.
Note that we need to push to the argv_array in order, which
means we can't do the push until we are in the "unpack-objects
versus index-pack" conditional. Rather than duplicate the
slightly complicated format specifier, I pushed it into a
helper function.
Signed-off-by: Jeff King <peff@peff.net>
When name-rev needs to format an actual name, we do so into
a fixed-size buffer. That includes the actual ref tip, as
well as any traversal information. Since refs can exceed
1024 bytes, this means you can get a bogus result. E.g.,
doing:
git tag $(perl -e 'print join("/", 1..1024)')
git describe --contains HEAD^
results in ".../282/283", when it should be
".../1023/1024~1".
We can solve this by using a heap buffer. We'll use a
strbuf, which lets us write into the same buffer from our
loop without having to reallocate.
Signed-off-by: Jeff King <peff@peff.net>
