For a fetch refspec (or the result of applying wildcard on one), we
always want the RHS to map to something inside "refs/" hierarchy.
This was split out from discarded jc/maint-push-refs-all topic.
* jc/maint-fetch-tighten-refname-check:
get_fetch_map(): tighten checks on dest refs
The code to check the refname we store the fetched result locally did not
bother checking the first 5 bytes of it, presumably assuming that it
always begin with "refs/". For a fetch refspec (or the result of applying
wildcard on one), we always want the RHS to map to something inside
"refs/" hierarchy, so let's spell that rule out in a more explicit way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message from "git push $there :bogo" mentioned we tried
and failed to guess what ref is being deleted based on the LHS of
the refspec, which we don't.
# By Jeff King
* jk/push-delete-ref-error-message:
push: don't guess at qualifying remote refs on deletion
When we try to push a ref and the right-hand side of the
refspec does not find a match, we try to create it. If it is
not fully qualified, we try to guess where it would go in
the refs hierarchy based on the left-hand source side. If
the source side is not a ref, then we give up and give a
long explanatory message.
For deletions, however, this doesn't make any sense. We
would never want to create on the remote side, and if an
unqualified ref can't be matched, it is simply an error. The
current code handles this already because the left-hand side
is empty, and therefore does not give us a hint as to where
the right-hand side should go, and we properly error out.
Unfortunately, the error message is the long "we tried to
qualify this, but the source side didn't let us guess"
message, which is quite confusing.
Instead, we can just be more succinct and say "we can't
delete this because we couldn't find it". So before:
$ git push origin :bogus
error: unable to push to unqualified destination: bogus
The destination refspec neither matches an existing ref on the remote nor
begins with refs/, and we are unable to guess a prefix based on the source ref.
error: failed to push some refs to '$URL'
and now:
$ git push origin :bogus
error: unable to delete 'bogus': remote ref does not exist
error: failed to push some refs to '$URL'
It is tempting to also catch a fully-qualified ref like
"refs/heads/bogus" and generate the same error message.
However, that currently does not error out at all, and
instead gets sent to the remote side, which typically
generates a warning:
$ git push origin:refs/heads/bogus
remote: warning: Deleting a non-existent ref.
To $URL
- [deleted] bogus
While it would be nice to catch this error early, a
client-side error would mean aborting the push entirely and
changing push's exit code. For example, right now you can
do:
$ git push origin refs/heads/foo refs/heads/bar
and end up in a state where "foo" and "bar" are deleted,
whether both of them currently exist or not (and see an
error only if we actually failed to contact the server).
Generating an error would cause a regression for this use
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we store lists of refs as linked lists, we can use
llist_mergesort to efficiently sort them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Will be useful in next patches. No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function match_name_with_pattern() is called twice, once to see if a
pattern matches with the name, and again to learn what the matched pattern
maps the name to. Since check_pattern_match() is only used in one place,
we can just reorganize it to make a single call and fetch the values at
the same time.
This changes the meaning of check_pattern_match() that used to check which
pattern in the array of refspecs matched the given ref, to return the name
of the remote ref the given ref is mapped to.
Rename it to get_ref_match() which actually describes more closely what
it's actually doing now.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can reuse src later on. No functional changes.
Will be useful in next patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function format_tracking_info in remote.c is called by
wt_status_print_tracking in wt-status.c, which will print
branch tracking message in git-status. git-checkout also
show these messages through it's report_tracking function.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
Conflicts:
remote.c
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
Previously, running
git fetch --prune origin refs/heads/master:refs/remotes/origin/master
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the body of remote_find_tracking() to a new helper query_refspecs()
that finds a refspec that matches and applies the transformation, but
explicitly takes the list of refspecs, and make remote_find_tracking() a
thin wrapper of it.
Make apply_refspecs() also use query_refspecs().
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yes, there is a warning that says the function is only used by push in big
red letters in front of this function, but it didn't say a more important
thing it should have said: what the function is for and what it does.
Rename it and document it to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a useful function, and we have already made the
similar alloc_ref and copy_ref_list available.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The guess_remote_head function tries to figure out where a
remote's HEAD is pointing by comparing the sha1 of the
remote's HEAD with the sha1 of various refs found on the
remote. However, we were too liberal in matching refs, and
would match tags or remote tracking branches, even though
these things could not possibly be referenced by the HEAD
symbolic ref (since git will detach when checking them out).
As a result, a clone of a remote repository with a detached
HEAD might write "refs/tags/*" into our local HEAD, which is
bogus. The resulting HEAD should be detached.
The other related code path is remote.c's get_head_names()
(which is used for, among other things, "set-head -a"). This was
not affected, however, as that function feeds only refs from
refs/heads to guess_remote_head.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the "tagopt = --tags" option of a remote is set, all tags
will be fetched as in "git fetch --tags".
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic that detects up-to-date and non-fast-forward refs to a
new function in remote.[ch], set_ref_status_for_push().
Make transport_push() invoke set_ref_status_for_push() before invoking
the push_refs() implementation. (As a side-effect, the push_refs()
implementation in transport-helper.c now knows of non-fast-forward
pushes.)
Removed logic for detecting up-to-date refs from the push_refs()
implementation in transport-helper.c, as transport_push() has already
done so for it.
Make cmd_send_pack() invoke set_ref_status_for_push() before invoking
send_pack(), as transport_push() can't do it for send_pack() here.
Mark the test on the return status of non-fast-forward push to fail.
Git now exits with success, as transport.c::transport_push() does not
check for refs with status REF_STATUS_REJECT_NONFASTFORWARD nor does it
indicate rejected pushes with its return value.
Mark the test for ref status to succeed. As mentioned earlier, refs
might be marked as non-fast-forwards, triggering the push status
printing mechanism in transport.c.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
* bg/fetch-multi:
Re-implement 'git remote update' using 'git fetch'
builtin-fetch: add --dry-run option
builtin-fetch: add --prune option
teach warn_dangling_symref to take a FILE argument
remote: refactor some logic into get_stale_heads()
Add missing test for 'git remote update --prune'
Add the configuration option skipFetchAll
Teach the --multiple option to 'git fetch'
Teach the --all option to 'git fetch'
This allows a helper to say that, when it handles "import
refs/heads/topic", the script it outputs will actually write to
refs/svn/origin/branches/topic; therefore, transport-helper should
read it from the latter location after git-fast-import completes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If this is set, the url is not required, and the transport always uses
a helper named "git-remote-<value>".
It is a separate configuration option in order to allow a sensible
configuration for foreign systems which either have no meaningful urls
for repositories or which require urls that do not specify the system
used by the repository at that location. However, this only affects
how the name of the helper is determined, not anything about the
interaction with the helper, and the contruction is such that, if the
foreign scm does happen to use a co-named url method, a url with that
method may be used directly.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, it only checks url, but it will allow other things in the future.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref_remove_duplicates, when we encounter a duplicate and remove it
from the list we need to make sure that the prev pointer stays
pointing at the last entry and also skip over adding the just freed
entry to the string_list.
Previously fetch could crash with:
*** glibc detected *** git: corrupted double-linked list: ...
Also add a test to try and catch problems with duplicate removal in
the future.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic in builtin-remote.c which determines which local heads are stale
to remote.c so it can be used by other builtins.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the configuration skipFetchAll option to allow
certain remotes to be skipped when doing 'git fetch --all' and
'git remote update'. The existing skipDefaultUpdate variable
is still honored (by 'git fetch --all' and 'git remote update').
(If both are set in the configuration file with different values,
the value of the last occurrence will be used.)
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_remove_duplicates function was very slow at dealing with very
large numbers of refs. This is because it was using a linear search
through all remaining refs to find any duplicates of the current ref.
Rewriting it to use a string list to keep track of which refs have
already been seen and removing duplicates when they are found is much
more efficient.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote.c has a global set of URL rewrites, accessed by alias_url and
make_rewrite. Wrap them in a new "struct rewrites", passed to alias_url
and make_rewrite. This allows adding other sets of rewrites.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The majority of code in core git appears to use a single
space after if/for/while. This is an attempt to bring more
code to this standard. These are entirely cosmetic changes.
Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
Previously, the refspec "<src>:" would be expanded to
"<src>:refs/heads/". Instead, treat an empty <dst> just like refspecs
without a colon.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid code duplication by moving list tail search to match_refs().
This does not change the semantics, except for http-push, which now inserts
to the front of the ref list in order to get rid of the global remote_tail.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat_tracking_info() assumes that upstream references (as specified by
--track or set up automatically) are commits. By calling lookup_commit()
on them, create_objects() creates objects for them with type commit no
matter what their real type is; this disturbs lookup_tag() later on in the
call sequence, leading to git status, git branch -v and git checkout
erroring out.
Fix this by using lookup_commit_reference() instead so that (annotated)
tags can be used as upstream references.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the config file contains a section like this:
[remote]
default = foo
(it should be '[remotes]') then commands like
git status
git checkout
git branch -v
fail even though they are not obviously related to remotes. (These
commands write "ahead, behind" information and, therefore, access the
per-remote information).
Unknown configuration keys should be ignored, not trigger errors.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new shorten_unambiguous_ref() for simplifying the output of
upstream branch names. This affects status and checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it's silly to do this:
mkdir foo && cd foo && git init && git push somewhere.git
but segfault should not happen even in that case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/remote-prune:
add tests for remote groups
git remote update: Fallback to remote if group does not exist
remote: New function remote_is_configured()
git remote update: Report error for non-existing groups
git remote update: New option --prune
builtin-remote.c: Split out prune_remote as a separate function.
Previously, there was no easy way to check for the existence of a
configured remote. remote_get for example would always create the remote
"on demand".
This new function returns 1 if the remote is configured, 0 otherwise.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that local branches, when followed using --track, behave
the same as remote ones (e.g. differences being reported by git status
and git checkout). This fixes 1 known failure.
The fix is done within branch_get(): The first natural candidate,
namely remote_find_tracking(), does not have all the necessary info
because in general there is no remote struct for '.', and we don't want
one because it would show up in other places as well.
branch_get(), on the other hand, has access to merge_names[] (in
addition to merge[]) and therefore can set up the followed branch
easily.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* xx/db-refspec-vs-js-remote:
Support '*' in the middle of a refspec
Keep '*' in pattern refspecs
Use the matching function to generate the match results
Use a single function to match names against patterns
Make clone parse the default refspec with the normal code
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
The config file is not the only place remotes are defined, and without
consulting .git/remotes and .git/branches, you won't know if "origin" is
configured by the user. Don't give up too early and insult the user with
a wisecrack "Where do you want to fetch from today?"
The only thing the previous patch seems to want to prevent from happening
is a lazy "git fetch/push" that does not say where-from/to to produce an
error message 'origin not found', and we can do that by not letting
add_url_alias() to turn a nickname "origin" literally into a pathname
"origin" without changing the rest of the logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were always overwritten or the assigned
value was unused:
builtin-diff-tree.c::cmd_diff_tree(): nr_sha1
builtin-for-each-ref.c::opt_parse_sort(): sort_tail
builtin-mailinfo.c::decode_header_bq(): in
builtin-shortlog.c::insert_one_record(): len
connect.c::git_connect(): path
imap-send.c::v_issue_imap_cmd(): n
pretty.c::pp_user_info(): filler
remote::parse_refspec_internal(): llen
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter topic changes the definition of how refspec's src and dst side
is stored in-core; it used to be that the asterisk for pattern was
omitted, but now it is included. The former topic handcrafts an old style
refspec to feed the refspec matching machinery that lacks the asterisk and
triggers an error.
This resolves the semantic clash between the two topics early before they
need to be merged to integration branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to keep the requirements strict, each * has to be a full path
component, and there may only be one * per side. This requirement is
enforced entirely by check_ref_format(); the matching implementation
will substitute the whatever matches the * in the lhs for the * in the
rhs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do anything more capable with refspecs, the first step is
to keep the entire input. Additionally, validate patterns by checking
for the ref matching the rules for a pattern as given by
check_ref_format(). This requires a slight change to
check_ref_format() to make it enforce the requirement that the '*'
immediately follow a '/'.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts all of the interpretation of the pattern representation in a
single function for easy manipulation.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat_tracking_info() in remote.c is used to collect the statistics to
be able to say (for instance) from the output of "git checkout':
Your branch and 'foo' have diverged,
and have X and Y different commit(s) each, respectively.
Currently X and Y also includes the count of merges. This patch
excludes the merges from being counted.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual method for determining the ref pointed to by HEAD
is to compare HEAD's sha1 to the sha1 of all refs, trying to
find a unique match.
However, some transports actually get to look at HEAD
directly; we should make use of that information when it is
available. Currently, only http remotes support this
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_refs() returns non-zero if there is an error in
match_explicit_refs(), without handling any remaining pattern ref specs.
Its existing callers exit upon receiving non-zero, so a partial result
is of no consequence to them; however a new caller, builtin-remote, is
interested in the complete result even if there are errors in
match_explicit_refs().
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some instances, match_refs() sets the peer_ref field of refs in the
dst list such that it points to a ref in the src list. This prevents
callers from freeing both the src and dst lists, as doing so would cause
a double-free since free_refs() frees the peer_ref.
As well, the following configuration causes two refs in the dst list to
have the same peer_ref, which can also lead to a double-free:
push = refs/heads/master:refs/heads/backup
push = refs/heads/master:refs/heads/master
Existing callers of match_heads() call it only once and then terminate,
w/o ever bothering to free the src or dst lists, so this is not
currently a problem.
This patch modifies match_refs() to first copy any refs it plucks from
the src list before assigning them as a peer_ref. This allows
builtin-remote, a future caller, to free the src and dst lists.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Determining HEAD is ambiguous since it is done by comparing SHA1s.
In the case of multiple matches we return refs/heads/master if it
matches, else we return the first match we encounter. builtin-remote
needs all matches returned to it, so add a flag for it to request such.
To be simple and consistent, the return value is now a copy (including
peer_ref) of the matching refs.
Originally contributed by Jeff King along with the prior commit as a
single patch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ensure that copied refs can always be freed w/o causing a
double-free, make copy_ref() perform a deep copy.
Also have copy_ref() return NULL if asked to copy NULL to simplify
things for the caller.
Background: currently copy_ref() performs a shallow copy. This is fine
for current callers who never free the result and/or only copy refs
which contain NULL pointers. But copy_ref() is about to gain a new
caller (guess_remote_head()) which copies refs where peer_ref is not
NULL and the caller of guess_remote_head() will want to free the result.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function had complications which made it hard to extend.
- It used to do two things: find the HEAD ref, and then find a
matching ref, optionally returning the former via assignment to a
passed-in pointer. Since finding HEAD is a one-liner, just have a
caller do it themselves and pass it as an argument.
- It used to manually search through the ref list for
refs/heads/master; this can be a one-line call to
find_ref_by_name.
Originally contributed by Jeff King along with the next commit as a
single patch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move locate_head() to remote.c and rename it to guess_remote_head() to
more accurately reflect what it does. This is in preparation for being
able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref_newer() appears to have been copied from builtin-send-pack.c to
http-push.c via cut and paste. This patch moves the function and its
helper unmark_and_free() to remote.c. There was a slight difference
between the two implementations, one used TMP_MARK for the mark, the
other used 1. Per Jeff King, I went with TMP_MARK as more correct.
This is in preparation for being able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_local_heads() appears to have been copied from builtin-send-pack.c
to http-push.c via cut and paste. This patch moves the function and its
helper one_local_ref() to remote.c.
The two copies of one_local_ref() were not identical. I used the more
recent version from builtin-send-pack.c after confirming with Jeff King
that it was an oversight that commit 30affa1e did not update both
copies.
This is in preparation for being able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new inline function is_dot_or_dotdot is used to check if the
directory name is either "." or "..". It returns a non-zero value if
the given string is "." or "..". It's applicable to a lot of Git
source code.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current git versions ignore everything after # (called <head> in the
following) when pushing. Older versions (before cf818348f1),
interpret #<head> as part of the URL, which make git bail out.
As branches origin from Cogito, it is the best to correct this by using
the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows one to track where was the remote's original source, so that
it's possible to decide if it makes sense to migrate it to the config
format or not.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace pairs of alloc_ref() and strcpy() with alloc_ref_from_str(),
simplifying the code.
In connect.c, also a pair of alloc_ref() and memcpy() is replaced --
the additional cost of a strlen() call should not have too much of an
impact. Consistency and simplicity are more important.
In remote.c, the code was allocating 11 bytes more than needed for
the name part, but I couldn't see them being used for anything.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In three cases in remote.c, a "raw" ref is allocated using alloc_ref()
and then its is constructed using sprintf(). Clean it up by adding a
helper function, alloc_ref_with_prefix(), which creates a composite
name. Use it in alloc_ref_from_str(), too, as it simplifies the code.
Open code alloc_ref() in alloc_ref_with_prefix(), as the former is
going to be removed in the patch after the next.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
This test is supposed to disallow remote entries in the config file of the
form:
[remote "/foobar"]
...
The leading slash in '/foobar' is not acceptable.
Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites immediately initialize allocated memory with zero after
calling xmalloc. A single call to xcalloc can replace this two-call
sequence.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These functions are not used by any other file.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of call sites allocate memory for a refspec array, populate
its members with heap memory, and then free only the refspec pointer
while leaking the memory allocated for the member elements. Provide
a function for freeing the elements of a refspec array and the array
itself.
Caution to callers: code paths must be checked to ensure that the
refspec members "src" and "dst" can be passed to free.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We removed a handful of these useless if-before-free tests several months
ago. This change removes a new one that snuck back in.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A wildcard refspec is internally parsed into a refspec structure with src
and dst strings. Many parts of the code assumed that these do not include
the trailing "/*" when matching the wildcard pattern with an actual ref we
see at the remote. What this meant was that we needed to make sure not
just that the prefix matched, and also that a slash followed the part that
matched.
But a codepath that scans the result from ls-remote and finds matching
refs forgot to check the "matching part must be followed by a slash" rule.
This resulted in "refs/heads/b1" from the remote side to mistakenly match
the source side of "refs/heads/b/*:refs/remotes/b/*" refspec.
Worse, the refspec crafted internally by "git-clone", and a hardcoded
preparsed refspec that is used to implement "git-fetch --tags", violated
this "parsed widcard refspec does not end with slash" rule; simply adding
the "matching part must be followed by a slash" rule then would have
broken codepaths that use these refspecs.
This commit changes the rule to require a trailing slash to parsed
wildcard refspecs. IOW, "refs/heads/b/*:refs/remotes/b/*" is parsed as
src = "refs/heads/b/" and dst = "refs/remotes/b/". This allows us to
simplify the matching logic because we only need to do a prefixcmp() to
notice "refs/heads/b/one" matches and "refs/heads/b1" does not.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message length depends on the length of the branch name. In my case,
the branch name "origin/add-chickens2" put the first line of the "your
branch has diverged" message over 80 characters, which triggered "less -FS"
to not exit automatically as expected.
This patch rewords the messages to make the lines generally shorter, so
that you'd need a significantly longer branch name to trigger the problem.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When left-right traversal counts the commits in a diverged history, it
leaves the flags in the commits smudged, and we need to clear them before
we return. Otherwise the caller cannot inspect other branches with this
function again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People seem to like "Your branch is ahead by N commit" report made by
"git checkout", but the interface into the statistics function was a bit
clunky. This splits the function into three parts:
* The core "commit counting" function that takes "struct branch" and
returns number of commits to show if we are ahead, behind or forked;
* Convenience "stat formating" function that takes "struct branch" and
formats the report into a given strbuf, using the above function;
* "checkout" specific function that takes "branch_info" (type that is
internal to checkout implementation), calls the above function and
print the formatted result.
in the hope that the former two can be more easily reusable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec refs/tags/*:refs/tags/* is sufficiently common and generic
to merit having a constant instead of generating it as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes a struct ref able to represent a symref, and makes http.c
able to recognize one, and makes transport.c look for "HEAD" as a ref
in the list, and makes it dereference symrefs for the resulting ref,
if any.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, a push like:
git push remote src:dst
would go through the following steps:
1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also tighten test to require it to be correct.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-fetch-regression-1.5.4:
git-fetch test: test tracking fetch results, not just FETCH_HEAD
Fix branches file configuration
Tighten refspec processing
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
Fetched remote branch from .git/branches/foo should fetch into
refs/heads/foo. Also when partial URL is given, the fetched head should
always be remote HEAD, and the result should not be stored anywhere.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --tags elsewhere" is implemented in terms of wildcarded refspec
"refs/tags/*" these days, and the user wants to push the tags under the
same name to the other branch. This resurrects the support for it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
$ git push ../test.git ':/remote.c: Fix overtight refspec:master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we had a cop-out in the documentation to make the
behaviour "undefined" if configuration had more than one
insteadOf that would match the target URL, like this:
[url "git://git.or.cz/"]
insteadOf = "git.or.cz:" ; (1)
insteadOf = "repo.or.cz:" ; (2)
[url "/local/mirror/"]
insteadOf = "git.or.cz:myrepo" ; (3)
insteadOf = "repo.or.cz:" ; (4)
It would be most natural to take the longest and first match, i.e.
- rewrite "git.or.cz:frotz" to "git://git.or.cz/frotz" by using
(1),
- rewrite "git.or.cz:myrepo/xyzzy" to "/local/mirror/xyzzy" by favoring
(3) over (1), and
- rewrite "repo.or.cz:frotz" to "git://git.or.cz/frotz" by
favoring (2) over (4).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users with different preferences for access methods to the
same remote repositories to rewrite each other's URLs by pattern
matching across a large set of similiarly set up repositories to each
get the desired access.
For example, if you don't have a kernel.org account, you might want
settings like:
[url "git://git.kernel.org/pub/"]
insteadOf = master.kernel.org:/pub
Then, if you give git a URL like:
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
it will act like you gave it:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
and you can cut-and-paste pull requests in email without fixing them
by hand, for example.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a refspec like "HEAD", we used to treat it as
"HEAD:HEAD", which didn't work without rewriting. Instead, we should
resolve the ref. If it's a symref, further require it to point to a
branch, to avoid doing anything especially unexpected. Also remove the
rewriting previously added in builtin-push.
Since the code for "HEAD" uses the regular refspec parsing, it
automatically handles "+HEAD" without anything special.
[jc: added a further test to make sure that "remote.*.push = HEAD" works]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration reader to enumerate branches that have configuration
data were not careful enough and failed to skip "branch.<variable>"
entries (e.g. branch.autosetupmerge). This resulted in bogus attempt to
allocate huge memory.
Noticed by David Miller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
As well as allowing a default http.proxy option, allow it to be set
per-remote.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old rules used by fetch were coded as a series of ifs. The old
rules are:
1) match full refname if it starts with "refs/" or matches "HEAD"
2) verify that full refname starts with "refs/"
3) match abbreviated name in "refs/" if it starts with "heads/",
"tags/", or "remotes/".
4) match abbreviated name in "refs/heads/"
This is replaced by the new rules
a) match full refname
b) match abbreviated name prefixed with "refs/"
c) match abbreviated name prefixed with "refs/heads/"
The details of the new rules are different from the old rules. We no
longer verify that the full refname starts with "refs/". The new rule
(a) matches any full string. The old rules (1) and (2) were stricter.
Now, the caller is responsible for using sensible full refnames. This
should be the case for the current code. The new rule (b) is less
strict than old rule (3). The new rule accepts abbreviated names that
start with a non-standard prefix below "refs/".
Despite this modifications the new rules should handle all cases as
expected. Two tests are added to verify that fetch does not resolve
short tags or HEAD in remotes.
We may even think about loosening the rules a bit more and unify them
with the rev-parse rules. This would be done by replacing
ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test
would break.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit changes the rules for resolving refspecs to match the
rules for resolving refs in rev-parse. git-rev-parse uses clear rules
to resolve a short ref to its full name, which are well documented.
The rules for resolving refspecs documented in git-send-pack were
less strict and harder to understand. This commit replaces them by
the rules of git-rev-parse.
The unified rules are easier to understand and better resolve ambiguous
cases. You can now push from a repository containing several branches
ending on the same short name.
Note, this may break existing setups. For example, "master" will no longer
resolve to "origin/master" even when there is no other "master" elsewhere.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing "git push --all" is almost perfect for backing up to
another repository, except that "--all" only means "all
branches" in modern git, and it does not delete old branches and
tags that exist at the back-up repository that you have removed
from your local repository.
This teaches "git-send-pack" a new "--mirror" option. The
difference from the "--all" option are that (1) it sends all
refs, not just branches, and (2) it deletes old refs you no
longer have on the local side from the remote side.
Original patch by Junio C Hamano.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the branch named with branch.$name.merge is not covered by
the fetch configuration for the remote repository named with
branch.$name.remote, we automatically add that branch to the set
of branches to be fetched. However, if the remote repository
does not have that branch (e.g. it used to exist, but got
removed), this is not a reason to fail the git-fetch itself.
The situation however will be noticed if git-fetch was called by
git-pull, as the resulting FETCH_HEAD would not have any entry
that is marked for merging.
Acked-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
When matching source and destination refs, we were failing
to pull the 'force' parameter from wildcard refspecs (but
not explicit ones) and attach it to the ref struct.
This adds a test for explicit and wildcard refspecs; the
latter fails without this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Originally-by: Väinö Järvelä <v@pp.inet.fi>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If multiple refspecs matched the same ref, the update would be
processed multiple times. Now having the same destination for the same
source has no additional effect, and having the same destination for
different sources is an error.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If `git push url foo` can't find a local branch named foo we can't
match it to any remote branch as the local branch is NULL and its
name is probably at position 0x34 in memory. On most systems that
isn't a valid address for git-send-pack's virtual address space
and we segfault.
If we can't find a source match and we have no destination we
need to abort the match function early before we try to match the
destination against the remote.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simple change makes the body of "case 0" easier to read; no
matter what the value of matched_src is we want to break out of
the switch and not fall through. We only want to display an error
if matched_src is NULL, as this indicates there is no local branch
matching the input.
Also modified the default case's error message so it uses one less
line of text. Even at 8 column per tab indentation we still don't
break 80 columns with this new formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git style tends to prefer "!x" over "x == NULL". Make it so in
these handful of locations that were not following along.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anyplace we talk about the address of a remote repository we always
refer to it as a URL, especially in the configuration file and
.git/remotes where we call it "remote.$n.url" or start the first
line with "URL:". Calling this value a uri within the internal C
code just doesn't jive well with our commonly accepted terms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My prior bug fix for git-push titled "Don't configure remote "." to
fetch everything to itself" actually broke t5520 as we were unable
to evaluate a branch configuration of:
[branch "copy"]
remote = .
merge = refs/heads/master
as remote "." did not have a "remote...fetch" configuration entry to
offer up refs/heads/master as a possible candidate available to be
fetched and merged. In shell script git-fetch and prior to the above
mentioned commit this was hardcoded for a url of "." to be the set of
local branches.
Chasing down this bug led me to the conclusion that our prior behavior
with regards to branch.$name.merge was incorrect. In the shell script
based git-fetch implementation we only fetched and merged a branch if
it appeared both in branch.$name.merge *and* in remote.$r.fetch, where
$r = branch.$name.remote. In other words in the following config file:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
[branch "pu"]
remote = origin
merge = refs/heads/pu
Attempting to run `git pull` while on branch "pu" would always give
the user "Already up-to-date" as git-fetch did not fetch pu and thus
did not mark it for merge in .git/FETCH_HEAD. The configured merge
would always be ignored and the user would be left scratching her
confused head wondering why merge did not work on "pu" but worked
fine on "master".
If we are using the "default fetch" specification for the current
branch and the current branch has a branch.$name.merge configured
we now union it with the list of refs in remote.$r.fetch. This
way the above configuration does what the user expects it to do,
which is to fetch only "master" by default but when on "pu" to
fetch both "master" and "pu".
This uncovered some breakage in the test suite where old-style Cogito
branches (.git/branches/$r) did not fetch the branches listed in
.git/config for merging and thus did not actually merge them if the
user tried to use `git pull` on that branch. Junio and I discussed
it on list and felt that the union approach here makes more sense to
DWIM for the end-user than silently ignoring their configured request
so the test vectors for t5515 have been updated to include for-merge
lines in .git/FETCH_HEAD where they have been configured for-merge
in .git/config.
Since we are now performing a union of the fetch specification and
the merge specification and we cannot allow a branch to be listed
twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to
perform a double loop here over all of the branch.$name.merge lines
and try to set their merge flag if we have already schedule that
branch for fetching by remote.$r.fetch. If no match is found then
we must add new specifications to fetch the branch but not store it
as no local tracking branch has been designated.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are fetching something and were configured to do a forced
fetch and have no local ref to store the fetched object into we
cannot mark the local ref as having a forced update. Instead we
should just silently discard the + request.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we are talking about a remote URI of "." we are really talking
about *this* repository that we are fetching into or pushing out of.
There are no matching tracking branches for this repository; we
do not attempt to map a ref back to ourselves as this would either
create an infinite cycle (for example "fetch = +refs/*:refs/mine/*")
or it causes problems when we attempt to push back to ourselves.
So we really cannot setup a remote like this:
[remote "."]
url = .
fetch = +refs/*:refs/*
In the case of `git push . B:T` to fast-forward branch T to B's
current commit git-send-pack will update branch T to B, assuming that
T is the remote tracking branch for B. This update is performed
immediately before git-send-pack asks git-receive-pack to perform
the same update, and git-receive-pack then fails because T is not
where git-send-pack told it to expect T to be at.
In the case of `git fetch .` we really should do the same thing as
`git fetch $otherrepo`, that is load .git/FETCH_HEAD with the commit
of HEAD, so that `git pull .` will report "Already up-to-date".
We have always behaved like this before on this insane request and
we should at least continue to behave the same way. With the above
(bad) remote configuration we were instead getting fetch errors
about funny refs, e.g. "refs/stash".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds full parsing for branch.<name> sections and functions to
interpret the results usefully. It incidentally corrects the fetch
configuration information for legacy branches/* files with '#'
characters in the URLs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function for_each_remote() does exactly what the name
suggests.
The function remote_find_tracking() was extended to be able to
search remote refs for a given local ref. The caller sets
either src or dst (but not both) in the refspec parameter, and
remote_find_tracking() will fill in the other and return 0.
Both changes are required for the next step: simplification of
git-branch's --track functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions for managing ref lists were named based on their use in
match_refs (for push). For fetch, they will be used for other purposes, so
rename them as a separate patch to make the future code readable.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of open-coding allocation wherever it happens, have a function.
Also, add a function to free a list of refs, which we currently never
actually do.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push" is run without any refspec (neither on the
command line nor in the config), we used to push "matching refs"
in the sense that anything under refs/ hierarchy that exist on
both ends were updated. This used to be a sane default for
publishing your repository to another back when we did not have
refs/remotes/ hierarchy, but it does not make much sense these
days.
This changes the semantics to push only "matching branches".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/remote:
git-push: Update description of refspecs and add examples
remote.c: "git-push frotz" should update what matches at the source.
remote.c: fix "git push" weak match disambiguation
remote.c: minor clean-up of match_explicit()
remote.c: refactor creation of new dst ref
remote.c: refactor match_explicit_refs()
Refspecs with no colons are left with no dst value, because they are
interepreted differently for fetch and push. For push, they mean to
reuse the src side. Fix this for patterns.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only a dozen or so uses of strdup in all of git.
Of those, most seem ok, but this one isn't:
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, when the local repository has a branch "frotz" and the
remote repository has a tag "frotz" (but not branch "frotz"),
"git-push frotz" mistakenly updated the tag at the remote side.
This was because the partial refname matching code was applied
independently on both source and destination side.
With this fix, when a colon-less refspec is given to git-push,
we first match it with the refs in the source repository, and
update the matching ref in the destination repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push A:B" is given, and A (or B) is not a full refname
that begins with refs/, we require an unambiguous match with an
existing ref. For this purpose, a match with a local branch or
a tag (i.e. refs/heads/A and refs/tags/A) is called a "strong
match", and any other match is called a "weak match". A partial
refname is unambiguous when there is only one strong match with
any number of weak matches, or when there is only one weak match
and no other match.
However, as reported by Sparse with Ramsay Jones recently,
count_refspec_match() function had a bug where a variable in an
inner block masked a different variable of the same name, which
caused the weak matches to be ignored.
This fixes it, and adds tests for the fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking what ref the source refspec matches, we have no
business setting the default for the destination, so move that
code lower. Also simplify the result from the code block that
matches the source side by making it set matched_src only upon
unambiguous match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors open-coded sequence to create a new "struct ref"
and link it to the tail of dst list into a new function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does not change functionality; just splits one block that
is deeply nested and indented out of a huge loop into a separate
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise
git push 'remote-name' 'refs/heads/*:refs/remotes/other/*'
will consider references in "refs/heads" of the remote repository
"remote-name", instead of the ones in "refs/remotes/other", which
the given refspec clearly means.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means that send-pack and http-push will support pattern refspecs,
so builtin-push.c doesn't have to expand them, and also git push can
just turn --tags into "refs/tags/*", further simplifying
builtin-push.c
check_ref_format() gets a third "conditionally okay" result for
something that's valid as a pattern but not as a particular ref.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These follow the pattern of the push side configuration, but aren't
taken from anywhere else, because git-fetch is still in shell.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new parser is different from the one in builtin-push in two ways:
the default is to use the current branch's remote, if there is one,
before "origin"; and config is used in preference to remotes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
