Commit graph

20 commits

Author SHA1 Message Date
Johannes Schindelin f927ae6c86 tests (rebase): spell out the --force-rebase option
In quite a few test cases, we were sloppy and used the abbreviation
`--force`, but we really should be precise in what we want to test.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-02 09:54:59 +09:00
Johannes Schindelin 10d2f35436 rebase -i: be careful to wrap up fixup/squash chains
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).

We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2018-09-04 08:59:33 -07:00
Johannes Schindelin 2f3eb68f10 rebase -i --autosquash: demonstrate a problem skipping the last squash
The `git commit --squash` command can be used not only to amend commit
messages and changes, but also to record notes for an upcoming rebase.

For example, when the author information of a given commit is incorrect,
a user might call `git commit --allow-empty -m "Fix author" --squash
<commit>`, to remind them to fix that during the rebase. When the editor
would pop up, the user would simply delete the commit message to abort
the rebase at this stage, fix the author information, and continue with
`git rebase --skip`. (This is a real-world example from the rebase of
Git for Windows onto v2.19.0-rc1.)

However, there is a bug in `git rebase` that will cause the squash
message *not* to be forgotten in this case. It will therefore be reused
in the next fixup/squash chain (if any).

This patch adds a test case to demonstrate this breakage.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2018-09-04 08:59:33 -07:00
Johannes Schindelin c44a4c650c rebase -i: rearrange fixup/squash lines using the rebase--helper
This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).

Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.

The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.

While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-27 15:35:06 -07:00
Johannes Schindelin b174ae7df2 t3415: test fixup with wrapped oneline
The `git commit --fixup` command unwraps wrapped onelines when
constructing the commit message, without wrapping the result.

We need to make sure that `git rebase --autosquash` keeps handling such
cases correctly, in particular since we are about to move the autosquash
handling into the rebase--helper.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-27 15:35:05 -07:00
Johannes Schindelin 4e7524e012 t3415: verify that an empty instructionFormat is handled as before
An upcoming patch will move the todo list generation into the
rebase--helper. An early version of that patch regressed on an empty
rebase.instructionFormat value (the shell version could not discern
between an empty one and a non-existing one, but the C version used the
empty one as if that was intended to skip the oneline from the `pick
<hash>` lines).

Let's verify that this still works as before.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-27 15:35:05 -07:00
Ævar Arnfjörð Bjarmason 0d75bfe67b tests: fix tests broken under GETTEXT_POISON=YesPlease
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.

I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.

My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.

1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-11 18:44:38 +09:00
Johannes Schindelin cbcd2cbd59 rebase -i: we allow extra spaces after fixup!/squash!
This new test case ensures that we handle commit messages that start
with fixup! or squash! followed by more than one space. While we do
not generate such messages when committing with --fixup/--squash, it
is perfectly legal for users to hand-craft their own fixup messages,
and we heed Postel's law by being lenient.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-07 15:40:59 -07:00
Johannes Schindelin c94e963b53 rebase -i: demonstrate a bug with --autosquash
When rearranging the edit script, we happily mistake the comment
character for a command, and the command for a SHA-1. As a consequence,
when we move fixup! and squash! commits, our logic to skip lines with
already handled SHA-1s mistakenly skips anything but the first
commented-out pick line, too.

The upcoming rebase--helper patches will address this bug, therefore we
do not need to make the current autosquash code even more complex than
it already is, just to fix this bug.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-07 15:40:23 -07:00
Michael Rappazzo 16cf51c7a2 git-rebase--interactive.sh: add config option for custom instruction format
A config option 'rebase.instructionFormat' can override the
default 'oneline' format of the rebase instruction list.

Since the list is parsed using the left, right or boundary mark plus
the sha1, they are prepended to the instruction format.

Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15 11:42:58 -07:00
Andrew Pimlott 22c5b13636 rebase -i: handle fixup! fixup! in --autosquash
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the
first.  This supports the case when a git commit --fixup/--squash referred
to an earlier fixup/squash instead of the original commit (whether
intentionally, as when the user expressly meant to note that the commit
fixes an earlier fixup; or inadvertently, as when the user meant to refer to
the original commit with :/msg; or out of laziness, as when the user could
remember how to refer to the fixup but not the original).

In the todo list, the full commit message is preserved, in case it provides
useful cues to the user.  A test helper set_cat_todo_editor is introduced to
check this.

Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andrew Pimlott <andrew@pimlott.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-27 13:52:41 -07:00
Stefano Lattarini 3fb0459bc8 tests: modernise style: more uses of test_line_count
Prefer:

  test_line_count <OP> COUNT FILE

over:

  test $(wc -l <FILE) <OP> COUNT

(or similar usages) in several tests.

Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-11 09:32:20 -07:00
Junio C Hamano 9bec60d3a5 Merge branch 'pn/commit-autosquash'
* pn/commit-autosquash:
  add tests of commit --squash
  commit: --squash option for use with rebase --autosquash
  add tests of commit --fixup
  commit: --fixup option for use with rebase --autosquash
  pretty.c: teach format_commit_message() to reencode the output
  commit: helper methods to reduce redundant blocks of code

Conflicts:
	Documentation/git-commit.txt
	t/t3415-rebase-autosquash.sh
2010-12-03 16:13:06 -08:00
Kevin Ballard 68d5d03bc4 rebase: teach --autosquash to match on sha1 in addition to message
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.

Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09 09:44:19 -08:00
Kevin Ballard d3d7a421b1 rebase: better rearranging of fixup!/squash! lines with --autosquash
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.

Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.

Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-09 09:43:54 -08:00
Pat Notz 7951bd3029 add tests of commit --squash
t7500: test expected behavior of commit --squash
t3415: test interaction of commit --squash with rebase --autosquash
t3900: test commit --squash with i18n encodings

Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-04 13:53:36 -07:00
Pat Notz b1a6c0a96f add tests of commit --fixup
t7500: test expected behavior of commit --fixup
t3415: test interaction of commit --fixup with rebase --autosquash
t3900: test commit --fixup with i18n encodings

Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-04 13:53:35 -07:00
Yann Dirson 7c6eafa35a t/t3415: use && where applicable.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06 13:46:02 -07:00
Heiko Voigt dd1e5b313a add configuration variable for --autosquash option of interactive rebase
If you use this feature regularly you can now enable it by default. In
case the user wants to override this config on the commandline
--no-autosquash can be used to force disabling.

Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-14 08:47:29 -07:00
Nanako Shiraishi f59baa502f rebase -i --autosquash: auto-squash commits
Teach a new option, --autosquash, to the interactive rebase.
When the commit log message begins with "!fixup ...", and there
is a commit whose title begins with the same ..., automatically
modify the todo list of rebase -i so that the commit marked for
squashing come right after the commit to be modified, and change
the action of the moved commit from pick to squash.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-06 17:18:56 -08:00