Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
The previous commit introduced a --skip flag for cherry-pick and
revert. Update the advice messages, to tell users about this less
cumbersome way of skipping commits. Also add tests to ensure
everything is working fine.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am or rebase have a --skip flag to skip the current commit if the
user wishes to do so. During a cherry-pick or revert a user could
likewise skip a commit, but needs to use 'git reset' (or in the case
of conflicts 'git reset --merge'), followed by 'git (cherry-pick |
revert) --continue' to skip the commit. This is more annoying and
sometimes confusing on the users' part. Add a `--skip` option to make
skipping commits easier for the user and to make the commands more
consistent.
In the next commit, we will change the advice messages hence finishing
the process of teaching revert and cherry-pick "how to skip commits".
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using magic numbers for array size and index under `reset_merge`
function. Use `argv_array` instead. This will make code shorter and
easier to extend.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are on a path to teach cherry-pick/revert how to skip commits. To
achieve this, we could really make use of existing functions.
reset_for_rollback is one such function, but the name does not
intuitively suggest to use it to reset a merge, which it was born to
perform, see 539047c ("revert: introduce --abort to cancel a failed
cherry-pick", 2011-11-23). Change the name to reset_merge to make
it more intuitive.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
$ git rebase -x true HEAD~5
Executing: true
Executing: true
Executing: true
Executing: true
Executing: true)
Successfully rebased and updated refs/heads/master.
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places where 'struct repository' is already passed
around, but the_repository is still used. Use the right repo.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit 4a72486de9 ("fix cherry-pick/revert status after commit",
2019-04-16) used parse_insn_line() to parse the first line of the todo
list to check if it was a pick or revert. However if the todo list is
left over from an old cherry-pick or revert and references a commit that
no longer exists then parse_insn_line() prints an error message which is
confusing for users [1]. Instead parse just the command name so that the
user is alerted to the presence of stale sequencer state by status
reporting that a cherry-pick or revert is in progress.
Note that we should not be leaving stale sequencer state lying around
(or at least not as often) after commit b07d9bfd17 ("commit/reset: try
to clean up sequencer state", 2019-04-16). However the user may still
have stale state that predates that commit.
Also avoid printing an error message if for some reason the user has a
file called `sequencer` in $GIT_DIR.
[1] https://public-inbox.org/git/3bc58c33-4268-4e7c-bf1a-fe349b3cb037@www.fastmail.com/
Reported-by: Espen Antonsen <espen@inspired.no>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code that parses the name of the command at the start of
each line in the todo file into its own function so that it can be used
in the next commit.
As I don't want to burden other callers with having to pass in a pointer
to the end of the line the test for an abbreviated command is
changed. This change should not affect the behavior. Instead of testing
`eol == bol + 1` the new code checks for the end of the line by testing
for '\n', '\r' or '\0' following the abbreviated name. To avoid reading
past the end of an empty string it also checks that there is actually a
single character abbreviation before testing if it matches. This
prevents it from matching '\0' as the abbreviated name and then trying
to read another character.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that parses the todo list allows an unabbreviated command name
to be followed by a space or a tab, but if the command name is
abbreviated it only allows a space after it. Fix this inconsistency.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "merge -c" instruction during "git rebase --rebase-merges" should
give the user a chance to edit the log message, even when there is
otherwise no need to create a new merge and replace the existing
one (i.e. fast-forward instead), but did not. Which has been
corrected.
* pw/rebase-edit-message-for-replayed-merge:
rebase -r: always reword merge -c
If a merge can be fast-forwarded then make sure that we still edit the
commit message if the user specifies -c. The implementation follows the
same pattern that is used for ordinary rewords that are fast-forwarded.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is an error when removing the state directory then we should
report it. This matches what the non-interactive rebase does.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update a code comment that referred to those files as if they were still
there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
"git cherry-pick" run with the "-x" or the "--signoff" option used
to (and more importantly, ought to) clean up the commit log message
with the --cleanup=space option by default, but this has been
broken since late 2017. This has been fixed.
* pw/sequencer-cleanup-with-signoff-x-fix:
sequencer: fix cleanup with --signoff and -x
"git cherry-pick --options A..B", after giving control back to the
user to ask help resolving a conflicted step, did not honor the
options it originally received, which has been corrected.
* pw/cherry-pick-continue:
cherry-pick --continue: remember options
cherry-pick: demonstrate option amnesia
sequencer: break some long lines
The scripted version of "git rebase -i" wrote and rewrote the todo
list many times during a single step of its operation, and the
recent C-rewrite made a faithful conversion of the logic to C. The
implementation has been updated to carry necessary information
around in-core to avoid rewriting the same file over and over
unnecessarily.
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
This is in preparation for using `struct rebase_options` when parsing
options in cmd_rebase__interactive(). Using a string for onto,
restrict_revision and upstream, was a hangover from the scripted version
of rebase. The functions that use these variables are updated to take a
`struct commit`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the checkout runs in a separate process our index will be out of date
so it should be discarded. The existing callers are not doing this
consistently so do it here to avoid the callers having to worry about
it.
This fixes some test failures that happen if do_interactive_rebase() is
called without forking rebase--interactive which we will implement
shortly. Running
git rebase -i master topic
starting on master created empty todo lists because all the commits in
topic were marked as cherry-picks. After topic was checked out in
prepare_branch_to_be_rebased() the working tree contained the contents
from topic but the index contained master and the cache entries were
still valid. This meant that diff_populate_filespec() which loads the
blobs when calculating patch-id's ended up reading the contents for
master from the working tree which actually contained topic.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifies an explicit cleanup mode then save and restore it
so that it is preserved by 'git cherry-pick --continue'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) when --signoff or -x were given on the command
line the commit message was cleaned up with --cleanup=space or
commit.cleanup if it was set. Unfortunately this behavior was lost when
I implemented committing without forking. Fix this and add some tests to
catch future regressions.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remember --allow-empty, --allow-empty-message and
--keep-redundant-commits when cherry-pick stops for a conflict
resolution.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reformat save_opts() to remove excessively long lines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase simply complains about an "invalid line" when the
object hash of, say, a `pick` line could not be parsed.
Let's tell the user what happened in a little more detail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
This refactors rearrange_squash() to work on a todo_list to avoid
redundant reads and writes. The function is renamed
todo_list_rearrange_squash().
The old version created a new buffer, which was directly written to the
disk. This new version creates a new item list by just copying items
from the old item list, without creating a new buffer. This eliminates
the need to reparse the todo list, but this also means its buffer cannot
be directly written to the disk.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, rearrange_squash_in_todo_file().
complete_action() still uses rearrange_squash_in_todo_file() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As transform_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors sequencer_add_exec_commands() to work on a todo_list to
avoid redundant reads and writes to the disk.
Instead of inserting the `exec' commands between the other commands and
re-parsing the buffer at the end, they are appended to the buffer once,
and a new list of items is created. Items from the old list are copied
across and new `exec' items are appended when necessary. This
eliminates the need to reparse the buffer, but this also means we have
to use todo_list_write_to_disk() to write the file.
todo_list_add_exec_commands() and sequencer_add_exec_commands() are
modified to take a string list instead of a string -- one item for each
command. This makes it easier to insert a new command to the todo list
for each command to execute.
sequencer_add_exec_commands() still reads the todo list from the disk,
as it is needed by rebase -p.
complete_action() still uses sequencer_add_exec_commands() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes complete_action() to use edit_todo_list(), now that it can
handle the initial edit of the todo list.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the writing of the comment "Rebase $shortrevisions onto
$shortonto ($command_count commands)" from todo_list_write_to_file() to
append_todo_help().
shortrevisions, shortonto, and command_count are passed as parameters to
append_todo_help().
During the initial edit of the todo list, shortrevisions and shortonto
are not NULL. Therefore, if shortrevisions or shortonto is NULL, then
edit_todo would be true, otherwise it would be false. Thus, edit_todo
is removed from the parameters of append_todo_help().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like complete_action(), edit_todo_list() used a
function (transform_todo_file()) that read the todo list from the disk
and wrote it back, resulting in useless disk accesses.
This changes edit_todo_list() to call directly todo_list_write_to_file()
instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors skip_unnecessary_picks() to work on a todo_list. As this
function is only called by complete_action() (and thus is not used by
rebase -p), the file-handling logic is completely dropped here.
Instead of truncating the todo list’s buffer, the items are moved to
the beginning of the list, eliminating the need to reparse the list.
This also means its buffer cannot be directly written to the disk.
rewrite_file() is then removed, as it is now unused.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As rearrange_squash_in_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way, and the error
handling is slightly improved.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sequencer_add_exec_commands() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
complete_action() used functions that read the todo-list file, made some
changes to it, and wrote it back to the disk.
The previous commits were dedicated to separate the part that deals with
the file from the actual logic of these functions. Now that this is
done, we can call directly the "logic" functions to avoid useless file
access.
The parsing of the list has to be done by the caller. If the buffer of
the todo list provided by the caller is empty, a `noop' command is
directly added to the todo list, without touching the buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sequencer_make_script() write its script to a strbuf (ie. the
buffer of a todo_list) instead of a FILE. This reduce the amount of
read/write made by rebase interactive.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d0aaa46fd3 ("commit: move empty message checks to libgit",
2017-11-10) removes the last use of 'sign_off_header' outside of
the "sequencer.c" source file. Remove the extern declaration from
the header file and mark the definition of the symbol with the
static keyword.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new function to recreate the text of a todo list from
its commands and write it to a file. This will be useful as the next
few commits will change the use of the buffer in struct todo_list so it
will no longer be a mirror of the file on disk.
This functionality already exists in todo_list_transform(), but this
function was made to replace the buffer of a todo list, which is not
what we want here. Thus, the part of todo_list_transform() that
replaces the buffer is dropped, and the function is renamed
todo_list_to_strbuf(). It is called by todo_list_write_to_file() to
fill the buffer to write to the disk.
todo_list_write_to_file() can also take care of appending the help text
to the buffer before writing it to the disk, or to write only the first
n items of the list. This feature will be used by
skip_unnecessary_picks(), which has to write done commands in a file.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors transform_todos() to work on a todo_list. The function
is renamed todo_list_transform().
As rebase -p still need to check the todo list from the disk, a new
function is introduced, transform_todo_file(). It is still used by
complete_action() and edit_todo_list() for now, but they will be
replaced in a future commit.
todo_list_transform() is not a static function, because it will be used
by edit_todo_list() from rebase-interactive.c in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'arg' field of todo_item used to store the address of the first byte
of the parameter of a command in a todo list. It was associated with
the length of the parameter (the 'arg_len' field).
This replaces the 'arg' field by 'arg_offset'. This new field does not
store the address of the parameter, but the position of the first
character of the parameter in the buffer. todo_item_get_arg() is added
to return the address of the parameter of an item.
This will prevent todo_list_add_exec_commands() from having to do awful
pointer arithmetics when growing the todo list buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.
Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the structures todo_list and todo_item, and the functions
todo_list_release() and parse_insn_buffer(), accessible outside of
sequencer.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This clears the number of items of a todo_list before parsing it to
allow to parse the same list multiple times without issues. As its
items are not dynamically allocated, or don’t need to allocate memory,
no additionnal memory management is required here.
Furthermore, if a line is invalid, the type of the corresponding
command is set to a garbage value, and its argument is defined properly.
This will allow to recreate the text of a todo list from its commands,
even if one of them is incorrect.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'quiet' and 'interactive' may sound like antonyms, the interactive
machinery actually has logic that implements several
interactive_rebase=implied cases (--exec, --keep-empty, --rebase-merges)
which won't pop up an editor. The rewrite of interactive rebase in C
added a quiet option, though it only turns stats off. Since we want to
make the interactive machinery also take over for git-rebase--merge, it
should fully implement the --quiet option.
git-rebase--interactive was already somewhat quieter than
git-rebase--merge and git-rebase--am, possibly because cherry-pick has
just traditionally been quieter. As such, we only drop a few
informational messages -- "Rebasing (n/m)" and "Successfully rebased..."
Also, for simplicity, remove the differences in how quiet and verbose
options were recorded. Having one be signalled by the presence of a
"verbose" file in the state_dir, while the other was signalled by the
contents of a "quiet" file was just weirdly inconsistent. (This
inconsistency pre-dated the rewrite into C.) Make them consistent by
having them both key off the presence of the file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking multiple commits, it's impossible to have both
merge- and non-merge commits on the same command-line. Not specifying
'-m 1' results in cherry-pick refusing to handle merge commits, while
specifying '-m 1' fails on non-merge commits.
This patch allows '-m 1' for non-merge commits. As mainline is always
the only parent for a non-merge commit, it makes little sense to
disable it.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common use case for the `--exec` option is to verify that each commit
in a topic branch compiles cleanly, via `git rebase -x make <base>`.
However, when an `exec` in such a rebase fails, it is not re-scheduled,
which in this instance is not particularly helpful.
Let's offer a flag to reschedule failed `exec` commands.
Based on an idea by Paul Morelle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
The helper function to refresh the cached stat information in the
in-core index has learned to perform the lstat() part of the
operation in parallel on multi-core platforms.
* bp/refresh-index-using-preload:
refresh_index: remove unnecessary calls to preload_index()
speed up refresh_index() by utilizing preload_index()
Unify code to read the author-script used in "git am" and the
commands that use the sequencer machinery, e.g. "git rebase -i".
* pw/am-rebase-read-author-script:
sequencer: use read_author_script()
add read_author_script() to libgit
am: rename read_author_script()
am: improve author-script error reporting
am: don't die in read_author_script()
Every once in a while, the interactive rebase makes sure that no stale
files are lying around. These days, we need to include MERGE_HEAD into
that set of files, as the `merge` command will generate them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect that a `merge` can be skipped because the merged commit
is already an ancestor of HEAD, we do not need to commit, therefore
writing the MERGE_HEAD file is useless.
It is actually worse than useless: a subsequent `git commit` will pick
it up and think that we want to merge that commit, still.
To avoid that, move the code that writes the MERGE_HEAD file to a
location where we already know that the `merge` cannot be skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the_hash_algo stays, even if we can easily replace it with
repo->hash_algo. My reason is I still believe tying hash_algo to a
struct repository is a wrong move. But if I'm wrong, we can always go
for another round of conversion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to pass 'struct repository *' around most of the
time instead of 'struct index_state *' because most sequencer.c
operations need more than just the index, the_repository is replaced
as well in the functions that now take 'struct repository
*'. the_repository is still present in this file, but total clean up
will be done later. It's not the main focus of this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With refresh_index() learning to utilize preload_index() to speed up its
operation there is no longer any benefit to having the caller preload the
index first. Remove those unneeded calls by calling read_index() instead of
the preload variant.
There is no measurable performance impact of this patch - the 2nd call to
preload_index() bails out quickly but there is no reason to call it twice.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" learned to take 'b' as the short form of 'break'
option in the todo list.
* js/rebase-i-shortopt:
rebase -i: recognize short commands without arguments
"git rebase -i" learned a new insn, 'break', that the user can
insert in the to-do list. Upon hitting it, the command returns
control back to the user.
* js/rebase-i-break:
rebase -i: introduce the 'break' command
rebase -i: clarify what happens on a failed `exec`
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Use the new function added in the last commit to read the author
script, updating read_env_script() and read_author_ident(). We now
have a single code path that reads the author script for am and all
flavors of rebase. This changes the behavior of read_env_script() as
previously it would set any environment variables that were in the
author-script file. Now it is an error if the file contains other
variables or any of GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and
GIT_AUTHOR_DATE are missing. This is what am and the non interactive
version of rebase have been doing for several years so hopefully it
will not cause a problem for interactive rebase users. The advantage
is that we are reusing existing code from am which uses sq_dequote()
to properly dequote variables. This fixes potential problems with user
edited scripts as read_env_script() which did not track quotes
properly.
This commit also removes the fallback code for checking for a broken
author script after git is upgraded when a rebase is stopped. Now that
the parsing uses sq_dequote() it will reliably return an error if the
quoting is broken and the user will have to abort the rebase and
restart. This isn't ideal but it's a corner case and the detection of
the broken quoting could be confused by user edited author scripts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add read_author_script() to sequencer.c based on the implementation in
builtin/am.c and update read_am_author_script() to use
read_author_script(). The sequencer code that reads the author script
will be updated in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It came up in review [1, 2] that this non-idiomatic loop is a bit tricky.
When we find a space, we set `len = i`, which gives us the answer we are
looking for, but which also breaks out of the loop.
It turns out that this loop can confuse compilers as well. My copy of
gcc 7.3.0 realizes that we are essentially evaluating `(len + 1) < len`
and warns that the behavior is undefined if `len` is `INT_MAX`. (Because
the assignment `len = i` is guaranteed to decrease `len`, such undefined
behavior is not actually possible.)
Rewrite the loop to a more idiomatic variant which doesn't muck with
`len` in the loop body. That should help compilers and human readers
figure out what is going on here. But do note that we need to update
`len` since it is not only used just after this loop (where we could
have used `i` directly), but also later in this function.
While at it, reduce the scope of `i`.
[1] https://public-inbox.org/git/CAPig+cQbG2s-LrAo9+7C7=dXifbWFJ3SzuNa-QePHDk7egK=jg@mail.gmail.com/
[2] https://public-inbox.org/git/CAPig+cRjU6niXpT2FrDWZ0x1HmGf1ojVZj3uk2qXEGe-S7i_HQ@mail.gmail.com/
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
as shown by:
sequencer.c: In function ‘write_basic_state’:
sequencer.c:2392:37: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_verbose(), "");
where write_file will create an empty file if told to write an empty string
as can be inferred by the previous call
the somehow more convoluted syntax works around the issue by providing a non
empty format string and is already being used for the abort safety file since
1e41229d96 ("sequencer: make sequencer abort safer", 2016-12-07)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer instruction 'b', short for 'break', is rejected:
error: invalid line 2: b
The reason is that the parser expects all short commands to have
an argument. Permit short commands without arguments.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
The 'edit' command can be used to cherry-pick a commit and then
immediately drop out of the interactive rebase, with exit code 0, to let
the user amend the commit, or test it, or look around.
Sometimes this functionality would come in handy *without*
cherry-picking a commit, e.g. to interrupt the interactive rebase even
before cherry-picking a commit, or immediately after an 'exec' or a
'merge'.
This commit introduces that functionality, as the spanking new 'break'
command.
Suggested-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
oidset_insert() returns 1 if the object ID is already in the set and
doesn't add it again, or 0 if it hadn't been present. Make use of that
fact instead of checking with an extra oidset_contains() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.
(*) In this case, all stat info in the index becomes invalid and git
falls back to rehashing all file content to see if there's any
difference between updating stat info in the index. This is quite
expensive. Even with a repo as small as git.git, it takes 3
seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit b00bf1c9a8 ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8 (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).
We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This rewrites write_basic_state() from git-rebase.sh in C. This is the
first step in the conversion of init_basic_state(), hence the mode in
rebase--helper.c is called INIT_BASIC_STATE. init_basic_state() will be
converted in the next commit.
The part of read_strategy_opts() that parses the stategy options is
moved to a new function to allow its use in rebase--helper.c.
Finally, the call to write_basic_state() is removed from
git-rebase--interactive.sh, replaced by a call to `--init-basic-state`.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the modes `--skip-unnecessary-picks`, `--append-todo-help`,
and `--checkout-onto` from rebase--helper.c, the functions of
git-rebase--interactive.sh that were rendered useless by the rewrite of
complete_action(), and append_todo_help_to_file() from
rebase-interactive.c.
skip_unnecessary_picks() and checkout_onto() becomes static, as they are
only used inside of the sequencer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites complete_action() from shell to C.
A new mode is added to rebase--helper (`--complete-action`), as well as
a new flag (`--autosquash`).
Finally, complete_action() is stripped from git-rebase--interactive.sh.
The original complete_action() would return the code 2 when the todo
list contained no actions. This was a special case for rebase -i and
-p; git-rebase.sh would then apply the autostash, delete the state
directory, and die with the message "Nothing to do". This cleanup is
rewritten in C instead of returning 2. As rebase -i no longer returns
2, the comment describing this behaviour in git-rebase.sh is updated to
reflect this change.
The message "Nothing to do" is now printed with error(), and so becomes
"error: nothing to do". Some tests in t3404 check this value, so they
are updated to fit this change.
The first check might seem useless as we write "noop" to the todo list
if it is empty. Actually, the todo list might contain commented
commands (ie. empty commits). In this case, complete_action() won’t
write "noop", and will abort without starting the editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we want to suppress a coccinelle transformation
inside a particular function. For example, in finding
conversions of hashcmp() to oidcmp(), we should not convert
the call in oidcmp() itself, since that would cause infinite
recursion. We write that like this:
@@
identifier f != oidcmp;
expression E1, E2;
@@
f(...) {...
- hashcmp(E1->hash, E2->hash)
+ oidcmp(E1, E2)
...}
to match the interior of any function _except_ oidcmp().
Unfortunately, this doesn't catch all cases (e.g., the one
in sequencer.c that this patch fixes). The problem, as
explained by one of the Coccinelle developers in [1], is:
For transformation, A ... B requires that B occur on every
execution path starting with A, unless that execution path
ends up in error handling code. (eg, if (...) { ...
return; }). Here your A is the start of the function. So
you need a call to hashcmp on every path through the
function, which fails when you add ifs.
[...]
Another issue with A ... B is that by default A and B
should not appear in the matched region. So your original
rule matches only the case where every execution path
contains exactly one call to hashcmp, not more than one.
One way to solve this is to put the pattern inside an
angle-bracket pattern like "<... P ...>", which allows zero
or more matches of P. That works (and is what this patch
does), but it has one drawback: it matches more than we care
about, and Coccinelle uses extra CPU. Here are timings for
"make coccicheck" before and after this patch:
[before]
real 1m27.122s
user 7m34.451s
sys 0m37.330s
[after]
real 2m18.040s
user 10m58.310s
sys 0m41.549s
That's not ideal, but it's more important for this to be
correct than to be fast. And coccicheck is already fairly
slow (and people don't run it for every single patch). So
it's an acceptable tradeoff.
There _is_ a better way to do it, which is to record the
position at which we find hashcmp(), and then check it
against the forbidden function list. Like:
@@
position p : script:python() { p[0].current_element != "oidcmp" };
expression E1,E2;
@@
- hashcmp@p(E1->hash, E2->hash)
+ oidcmp(E1, E2)
This is only a little slower than the current code, and does
the right thing in all cases. Unfortunately, not all builds
of Coccinelle include python support (including the ones in
Debian). Requiring it may mean that fewer people can easily
run the tool, which is worse than it simply being a little
slower.
We may want to revisit this decision in the future if:
- builds with python become more common
- we find more uses for python support that tip the
cost-benefit analysis
But for now this patch sticks with the angle-bracket
solution, and converts all existing cocci patches. This
fixes only one missed case in the current code, though it
makes a much better difference for some new rules I'm adding
(converting "!hashcmp()" to "hasheq()" misses over half the
possible conversions using the old form).
[1] https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/
Helped-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The append_signoff() function takes an "int" to specify the
number of bytes to ignore. Most callers just pass 0, and the
remainder use ignore_non_trailer() to skip over cruft.
That function also returns an int, and uses them internally.
On systems where size_t is larger than an int (i.e., most
64-bit systems), dealing with a ridiculously large commit
message could end up overflowing an int, producing
surprising results (e.g., returning a negative offset, which
would cause us to look outside the original string).
Let's consistently use size_t for these offsets through this
whole stack. As a bonus, this makes the meaning of
"ignore_footer" as an offset (and not a boolean) more clear.
But while we're here, let's also document the interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the sequencer code appends a signoff or cherry-pick
origin, it uses the default trailer-parsing options, which
treat "---" as the end of the commit message. As a result,
it may be fooled by a commit message that contains that
string and fail to find the existing trailer block. Even
more confusing, the actual append code does not know about
"---", and always appends to the end of the string. This can
lead to bizarre results. E.g., appending a signoff to a
commit message like this:
subject
body
---
these dashes confuse the parser!
Signed-off-by: A
results in output with a final block like:
Signed-off-by: A
Signed-off-by: A
The parser thinks the final line of the message is "body",
and ignores everything else, claiming there are no trailers.
So we output an extra newline separator (wrong) and add a
duplicate signoff (also wrong).
Since we know we are feeding a pure commit message, we can
simply tell the parser to ignore the "---" divider.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the trailer code has an "opts" struct which is
filled in by the caller. We don't pass it down to
trailer_info_get(), which does the initial parsing, because
there hasn't yet been a need to do so.
Let's start passing it down in preparation for adding new
options. Note that there's a single caller which doesn't
otherwise have such an options struct. Since it's just one
caller (that we'd have to modify anyway), let's not bother
with any special treatment like accepting a NULL options
struct, and just have it allocate one with the defaults.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store the length of the trailers list in a size_t. So on
a 64-bit system with a 32-bit int, in the unlikely case that
we manage to actually allocate a list with 2^31 entries,
we'd loop forever trying to iterate over it (our "int" would
wrap to negative before exceeding info->trailer_nr).
This probably doesn't matter in practice. Each entry is at
least a pointer plus a non-empty string, so even without
malloc overhead or the memory to hold the original string
we're parsing from, you'd need to allocate tens of
gigabytes. But it's easy enough to do it right.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i", when a 'merge <branch>' insn in its todo list
fails, segfaulted, which has been (minimally) corrected.
* pw/rebase-i-merge-segv-fix:
rebase -i: fix SIGSEGV when 'merge <branch>' fails
t3430: add conflicting commit
When "git rebase -i" is told to squash two or more commits into
one, it labeled the log message for each commit with its number.
It correctly called the first one "1st commit", but the next one
was "commit #1", which was off-by-one. This has been corrected.
* pw/rebase-i-squash-number-fix:
rebase -i: fix numbering in squash message
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
The "--exec" option to "git rebase --rebase-merges" placed the exec
commands at wrong places, which has been corrected.
* js/rebase-merges-exec-fix:
rebase --exec: make it work with --rebase-merges
t3430: demonstrate what -r, --autosquash & --exec should do
If a merge command in the todo list specifies just a branch to merge
with no -C/-c argument then item->commit is NULL. This means that if
there are merge conflicts error_with_patch() is passed a NULL commit
which causes a segmentation fault when make_patch() tries to look it up.
This commit implements a minimal fix which fixes the crash and allows
the user to successfully commit a conflict resolution with 'git rebase
--continue'. It does not write .git/rebase-merge/patch,
.git/rebase-merge/stopped-sha or update REBASE_HEAD. To sensibly get the
hashes of the merge parents would require refactoring do_merge() to
extract the code that parses the merge parents into a separate function
which error_with_patch() could then use to write the parents into the
stopped-sha file. To create meaningful output make_patch() and 'git
rebase --show-current-patch' would also need to be modified to diff the
merge parent and merge base in this case.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
Commit e12a7ef597 ("rebase -i: Handle "combination of <n> commits" with
GETTEXT_POISON", 2018-04-27) changed the way that individual commit
messages are labelled when squashing commits together. In doing so a
regression was introduced where the numbering of the messages is off by
one. This commit fixes that and adds a test for the numbering.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts update_main_cache_tree() and write_cache_as_tree() in the
same group of "index compat" functions that assume the_index
implicitly, which should only be used within builtin/ or t/helper.
sequencer.c is also updated to not use these functions. As of now, no
files outside builtin/ use these functions anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of skip_unnecessary_picks() printing its result to stdout, it
returns it into a struct object_id, as the rewrite of complete_action()
(to come in the next commit) will need it.
rebase--helper then is modified to fit this change.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites checkout_onto() from shell to C.
A new command (“checkout-onto”) is added to rebase--helper.c. The shell
version is then stripped.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites (the misnamed) setup_reflog_action() from shell to C. The
new version is called prepare_branch_to_be_rebased().
A new command is added to rebase--helper.c, “checkout-base”, as well as
a new flag, “verbose”, to avoid silencing the output of the checkout
operation called by checkout_base_commit().
The function `run_git_checkout()` will also be used in the next commit,
therefore its code is not part of `checkout_base_commit()`.
The shell version is then stripped in favour of a call to the helper.
As $GIT_REFLOG_ACTION is no longer set at the first call of
checkout_onto(), a call to comment_for_reflog() is added at the
beginning of this function.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a new function, run_command_silent_on_success(), to
redirect the stdout and stderr of a command to a strbuf, and then to run
that command. This strbuf is printed only if the command fails. It is
functionnaly similar to output() from git-rebase.sh.
run_git_commit() is then refactored to use of
run_command_silent_on_success().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes rebase_path_todo(), get_missing_commit_check_level(),
write_message() and the enum check_level accessible outside sequencer.c,
renames check_level to missing_commit_check_level, and prefixes its
value names by MISSING_COMMIT_ to avoid namespace pollution.
This function and this enum will eventually be moved to
rebase-interactive.c and become static again, so no special attention
was given to the naming.
This will be needed for the rewrite of append_todo_help() from shell to
C, as it will be in a new library source file, rebase-interactive.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of `--exec` is to append an `exec` call after each `pick`.
Since the introduction of fixup!/squash! commits, this idea was extended
to apply to "pick, possibly followed by a fixup/squash chain", i.e. an
exec would not be inserted between a `pick` and any of its corresponding
`fixup` or `squash` lines.
The current implementation uses a dirty trick to achieve that: it
assumes that there are only pick/fixup/squash commands, and then
*inserts* the `exec` lines before any `pick` but the first, and appends
a final one.
With the todo lists generated by `git rebase --rebase-merges`, this
simple implementation shows its problems: it produces the exact wrong
thing when there are `label`, `reset` and `merge` commands.
Let's change the implementation to do exactly what we want: look for
`pick` lines, skip any fixup/squash chains, and then insert the `exec`
line. Lather, rinse, repeat.
Note: we take pains to insert *before* comment lines whenever possible,
as empty commits are represented by commented-out pick lines (and we
want to insert a preceding pick's exec line *before* such a line, not
afterward).
While at it, also add `exec` lines after `merge` commands, because they
are similar in spirit to `pick` commands: they add new commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Single quotes should be escaped as \' not \\'. The bad quoting breaks
the interactive version of 'rebase --root' (which is used when there
is no '--onto' even if the user does not specify --interactive) for
authors that contain "'" as sq_dequote() called by read_author_ident()
errors out on the bad quoting.
For other interactive rebases this only affects external scripts that
read the author script and users whose git is upgraded from the shell
version of rebase -i while rebase was stopped when the author contains
"'". This is because the parsing in read_env_script() expected the
broken quoting.
This patch includes code to handle the broken quoting when
git has been upgraded while rebase was stopped. It does this by
detecting the missing "'" at the end of the GIT_AUTHOR_DATE line to see
if it should dequote \\' as "'". Note this is only implemented for
normal picks, not for creating a new root commit (rebase will stop with
an error complaining out bad quoting in that case).
The fallback code has been manually tested by reverting both the quoting
fixes in write_author_script() and the previous fix for the missing "'"
at the end of the GIT_AUTHOR_DATE line and running
t3404-rebase-interactive.sh.
Ideally rebase and am would share the same code for reading and
writing the author script, but this commit just fixes the immediate
bug.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for a NULL return value from read_author_ident() that indicates
an error. Previously the NULL author was passed to commit_tree() which
would then fallback to using the default author when creating the new
commit. This changed the date and potentially the author of the commit
which corrupted the author data compared to its expected value.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
read_author_ident() is careful to handle errors "gently" when parsing
"rebase-merge/author-script" by printing a suitable warning and
returning NULL; it never die()'s. One possible reason that parsing might
fail is that "rebase-merge/author-script" has been hand-edited in such a
way which corrupts it or the information it contains.
However, read_author_ident() invokes fmt_ident() which is not so careful
about failing "gently". It will die() if it encounters a malformed
timestamp. Since read_author_ident() doesn't want to die() and since
it's dealing with possibly hand-edited data, take care to avoid passing
a bogus timestamp to fmt_ident().
A more "correctly engineered" fix would be to add a "gentle" version of
fmt_ident(), however, such a change it outside the scope of the bug-fix
series. If fmt_ident() ever does grow a "gentle" cousin, then the manual
timestamp check added here can be retired.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase -i --root" creates a new root commit, it corrupts the
"author" header's timestamp by prepending a "@":
author A U Thor <author@example.com> @1112912773 -0700
The commit parser is very strict about the format of the "author"
header, and does not allow a "@" in that position.
The "@" comes from GIT_AUTHOR_DATE in "rebase-merge/author-script",
signifying a Unix epoch-based timestamp, however, read_author_ident()
incorrectly allows it to slip into the commit's "author" header, thus
corrupting it.
One possible fix would be simply to filter out the "@" when constructing
the "author" header timestamp, however, a more correct fix is to parse
the GIT_AUTHOR_DATE date (via parse_date()) and format the parsed result
into the "author" header. Since "rebase-merge/author-script" may be
edited by the user, this approach has the extra benefit of catching
other potential timestamp corruption due to hand-editing.
We can do better than calling parse_date() ourselves and constructing
the "author" header manually, however, by instead taking advantage of
fmt_ident() which does this work for us.
The benefits of using fmt_ident() are twofold. First, it simplifies the
logic considerably by allowing us to avoid the complexity of building
the "author" header in parallel with and in the same buffer from which
"rebase-merge/author-script" is being parsed. Instead, fmt_ident() is
invoked to compose the header after parsing is complete.
Second, fmt_ident() is careful to prevent "crud" from polluting the
composed ident. As with validating GIT_AUTHOR_DATE, this "crud"
avoidance prevents other (possibly hand-edited) bogus author information
from "rebase-merge/author-script" from corrupting the commit object.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase -i --root" creates a new root commit, it corrupts the
"author" header's timezone by repeating the last digit:
author A U Thor <author@example.com> @1112912773 -07000
This is due to two bugs.
First, write_author_script() neglects to add the closing quote to the
value of GIT_AUTHOR_DATE when generating "rebase-merge/author-script".
Second, although sq_dequote() correctly diagnoses the missing closing
quote, read_author_ident() ignores sq_dequote()'s return value and
blindly uses the result of the aborted dequote.
sq_dequote() performs dequoting in-place by removing quoting and
shifting content downward. When it detects misquoting (lack of closing
quote, in this case), it gives up and returns an error without inserting
a NUL-terminator at the end of the shifted content, which explains the
duplicated last digit in the timezone.
(Note that the "@" preceding the timestamp is a separate bug which
will be fixed subsequently.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase -i --root" creates a new root commit (say, by swapping
in a different commit for the root), it corrupts the commit's "author"
header with trailing garbage:
author A U Thor <author@example.com> @1112912773 -07000or@example.com
This is a result of read_author_ident() neglecting to NUL-terminate the
buffer into which it composes the "author" header.
(Note that the "@" preceding the timestamp and the extra "0" in the
timezone are separate bugs which will be fixed subsequently.)
Security considerations: Construction of the "author" header by
read_author_ident() happens in-place and in parallel with parsing the
content of "rebase-merge/author-script" which occupies the same buffer.
This is possible because the constructed "author" header is always
smaller than the content of "rebase-merge/author-script". Despite
neglecting to NUL-terminate the constructed "author" header, memory is
never accessed (either by read_author_ident() or its caller) beyond the
allocated buffer since a NUL-terminator is present at the end of the
loaded "rebase-merge/author-script" content, and additional NUL's are
inserted as part of the parsing process.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Honor core.commentchar when preparing the list of commits to replay
in "rebase -i".
* as/sequencer-customizable-comment-char:
sequencer: use configured comment character
Handling of an empty range by "git cherry-pick" was inconsistent
depending on how the range ended up to be empty, which has been
corrected.
* jk/empty-pick-fix:
sequencer: don't say BUG on bogus input
sequencer: handle empty-set cases consistently
The codebase has been updated to compile cleanly with -pedantic
option.
* bb/pedantic:
utf8.c: avoid char overflow
string-list.c: avoid conversion from void * to function pointer
sequencer.c: avoid empty statements at top level
convert.c: replace "\e" escapes with "\033".
fixup! refs/refs-internal.h: avoid forward declaration of an enum
refs/refs-internal.h: avoid forward declaration of an enum
fixup! connect.h: avoid forward declaration of an enum
connect.h: avoid forward declaration of an enum
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/rebase-i-microfixes:
git-rebase--merge: modernize "git-$cmd" to "git $cmd"
Fix use of strategy options with interactive rebases
t3418: add testcase showing problems with rebase -i and strategy options
Bugfix for "rebase -i" corner case regression.
* pw/rebase-i-keep-reword-after-conflict:
sequencer: do not squash 'reword' commits when we hit conflicts
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
The sequencer currently passes GIT_DIR, but not GIT_WORK_TREE, to exec
commands. In that configuration, we assume that whatever directory
we're in is the top level of the work tree, and git rev-parse
--show-toplevel responds accordingly. However, when we're in a
subdirectory, that isn't correct: we respond with the subdirectory as
the top level, resulting in unexpected behavior.
Ensure that we pass GIT_WORK_TREE as well as GIT_DIR so that git
operations within subdirectories work correctly.
Note that we are guaranteed to have a work tree in this case: the
relevant sequencer functions are called only from revert, cherry-pick,
and rebase--helper; all of these commands require a working tree.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the configured comment character when generating comments about
branches in a todo list. Failure to honor this configuration causes a
failure to parse the resulting todo list.
Setting core.commentChar to "auto" will not be honored here, and the
previously configured or default value will be used instead. But, since
the todo list will consist of only generated content, there should not
be any non-comment lines beginning with that character.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we introduced the `merge` command for use in todo lists,
to allow to recreate and modify branch topology.
For ease of implementation, and to make review easier, the initial
implementation only supported merge commits with exactly two parents.
This patch adds support for octopus merges, making use of the
just-introduced `-F <file>` option for the `git merge` command: to keep
things simple, we spawn a new Git command instead of trying to call a
library function, also opening an easier door to enhance `rebase
--rebase-merges` to optionally use a merge strategy different from
`recursive` for regular merges: this feature would use the same code
path as octopus merges and simply spawn a `git merge`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking a single commit, we go through a special
code path that avoids creating a sequencer todo list at all.
This path expects our revision parsing to turn up exactly
one commit, and dies with a BUG if it doesn't.
But it's actually quite easy to fool. For example:
$ git cherry-pick --author=no.such.person HEAD
error: BUG: expected exactly one commit from walk
fatal: cherry-pick failed
This isn't a bug; it's just bogus input.
The condition to trigger this message actually has two
parts:
1. We saw no commits. That's the case in the example
above. Let's drop the "BUG" here to make it clear that
the input is the problem. And let's also use the phrase
"empty commit set passed", which matches what we say
when we do a real revision walk and it turns up empty.
2. We saw more than one commit. That one _should_ be
impossible to trigger, since we fed at most one tip and
provided the no_walk option (and we'll have already
expanded options like "--branches" that can turn into
multiple tips). If this ever triggers, it's an
indication that the conditional added by 7acaaac275
(revert: allow single-pick in the middle of cherry-pick
sequence, 2011-12-10) needs to more carefully define
the single-pick case.
So this can remain a bug, but we'll upgrade it to use
the BUG() macro, which would make it easier to detect
and analyze if it does trigger.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives us a set that prepare_revision_walk()
takes to be empty, like:
git cherry-pick base..base
then we report an error. It's nonsense, and there's nothing
to pick.
But if they use revision options that later cull the list,
like:
git cherry-pick --author=nobody base~2..base
then we quietly create an empty todo list and return
success.
Arguably either behavior is acceptable, but we should
definitely be consistent about it. Reporting an error
seems to match the original intent, which dates all the way
back to 7e2bfd3f99 (revert: allow cherry-picking more than
one commit, 2010-06-02). That in turn was trying to match
the single-commit case that existed before then (and which
continues to issue an error).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macro GIT_PATH_FUNC expands to a function definition that ends with
a closing brace. Remove two extra semicolons.
While at it, fix the example in path.h.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase.sh wrote strategy options to .git/rebase/merge/strategy_opts
in the following format:
'--ours' '--renormalize'
Note the double spaces.
git-rebase--interactive uses sequencer.c to parse that file, and
sequencer.c used split_cmdline() to get the individual strategy options.
After splitting, sequencer.c prefixed each "option" with a double dash,
so, concatenating all its options would result in:
-- --ours -- --renormalize
So, when it ended up calling try_merge_strategy(), that in turn would run
git merge-$strategy -- --ours -- --renormalize $merge_base -- $head $remote
instead of the expected/desired
git merge-$strategy --ours --renormalize $merge_base -- $head $remote
Remove the extra spaces so that when it goes through split_cmdline() we end
up with the desired command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Misc leak plugging.
* sb/plug-misc-leaks:
sequencer.c: plug mem leak in git_sequencer_config
sequencer.c: plug leaks in do_pick_commit
submodule--helper: plug mem leak in print_default_remote
refs/packed-backend.c: close fd of empty file
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
Ever since commit 18633e1a22 ("rebase -i: use the rebase--helper builtin",
2017-02-09), when a commit marked as 'reword' in an interactive rebase
has conflicts and fails to apply, when the rebase is resumed that commit
will be squashed into its parent with its commit message taken.
The issue can be understood better by looking at commit 56dc3ab04b
("sequencer (rebase -i): implement the 'edit' command", 2017-01-02), which
introduced error_with_patch() for the edit command. For the edit command,
it needs to stop the rebase whether or not the patch applies cleanly. If
the patch does apply cleanly, then when it resumes it knows it needs to
amend all changes into the previous commit. If it does not apply cleanly,
then the changes should not be amended. Thus, it passes !res (success of
applying the 'edit' commit) to error_with_patch() for the to_amend flag.
The problematic line of code actually came from commit 04efc8b57c
("sequencer (rebase -i): implement the 'reword' command", 2017-01-02).
Note that to get to this point in the code:
* !!res (i.e. patch application failed)
* item->command < TODO_SQUASH
* item->command != TODO_EDIT
* !is_fixup(item->command) [i.e. not squash or fixup]
So that means this can only be a failed patch application that is either a
pick, revert, or reword. We only need to amend HEAD when rewording the
root commit or a commit that has been fast-forwarded, for any of the other
cases we want a new commit, so we should not set the to_amend flag.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Original-patch-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression to "rebase -i --root" introduced during this cycle has
been fixed.
* js/rebase-i-root-fix:
rebase --root: fix amending root commit messages
rebase --root: demonstrate a bug while amending root commit messages
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Going to leave, we additionally free the author and commit message
and make sure to call update_abort_safety_file().
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
The implementation of "git rebase -i --root" has been updated to use
the sequencer machinery more.
* js/sequencer-and-root-commits:
rebase --rebase-merges: root commits can be cousins, too
rebase --rebase-merges: a "merge" into a new root is a fast-forward
sequencer: allow introducing new root commits
rebase -i --root: let the sequencer handle even the initial part
sequencer: learn about the special "fake root commit" handling
sequencer: extract helper to update active_cache_tree
When writing the todo script for --rebase-merges, we try to find a label
for certain commits. If the label ends up being a valid object ID, such
as when we merge a detached commit, we want to rewrite it so it is no
longer a valid object ID.
However, the code path that does this checks for its length to be
equivalent to GIT_SHA1_RAWSZ, which isn't correct, since what we are
reading is a hex object ID. Instead, check for the length being
equivalent to that of a hex object ID. Use the_hash_algo so this code
works regardless of the hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" learned "--rebase-merges" to transplant the whole
topology of commit graph elsewhere.
* js/rebase-recreate-merge:
rebase -i --rebase-merges: add a section to the man page
rebase -i: introduce --rebase-merges=[no-]rebase-cousins
pull: accept --rebase=merges to recreate the branch topology
rebase --rebase-merges: avoid "empty merges"
sequencer: handle post-rewrite for merge commands
sequencer: make refs generated by the `label` command worktree-local
rebase --rebase-merges: add test for --keep-empty
rebase: introduce the --rebase-merges option
rebase-helper --make-script: introduce a flag to rebase merges
sequencer: fast-forward `merge` commands, if possible
sequencer: introduce the `merge` command
sequencer: introduce new commands to reset the revision
git-rebase--interactive: clarify arguments
sequencer: offer helpful advice when a command was rescheduled
sequencer: refactor how original todo list lines are accessed
sequencer: make rearrange_squash() a bit more obvious
sequencer: avoid using errno clobbered by rollback_lock_file()
"git rebase -i" sometimes left intermediate "# This is a
combination of N commits" message meant for the human consumption
inside an editor in the final result in certain corner cases, which
has been fixed.
* js/rebase-i-clean-msg-after-fixup-continue:
rebase --skip: clean up commit message after a failed fixup/squash
sequencer: always commit without editing when asked for
rebase -i: Handle "combination of <n> commits" with GETTEXT_POISON
rebase -i: demonstrate bugs with fixup!/squash! commit messages
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).
* sb/oid-object-info:
cache.h: allow oid_object_info to handle arbitrary repositories
packfile: add repository argument to cache_or_unpack_entry
packfile: add repository argument to unpack_entry
packfile: add repository argument to read_object
packfile: add repository argument to packed_object_info
packfile: add repository argument to packed_to_object_type
packfile: add repository argument to retry_bad_packed_offset
cache.h: add repository argument to oid_object_info
cache.h: add repository argument to oid_object_info_extended
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a "rebase -i" session, the code could give older timestamp
to commits created by later "pick" than an earlier "reword", which
has been corrected.
* js/ident-date-fix:
sequencer: reset the committer date before commits
Reported by Wink Saville: when rebasing with no-rebase-cousins, we
will want to refrain from rebasing all of them, even when they are
root commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an interactive rebase wants to recreate a root commit, it
- first creates a new, empty root commit,
- checks it out,
- converts the next `pick` command so that it amends the empty root
commit
Introduce support in the sequencer to handle such an empty root commit,
by looking for the file <GIT_DIR>/rebase-merge/squash-onto; if it exists
and contains a commit name, the sequencer will compare the HEAD to said
root commit, and if identical, a new root commit will be created.
While converting scripted code into proper, portable C, we also do away
with the old "amend with an empty commit message, then cherry-pick
without committing, then amend again" dance and replace it with code
that uses the internal API properly to do exactly what we want: create a
new root commit.
To keep the implementation simple, we always spawn `git commit` to create
new root commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user provides a todo list containing something like
reset [new root]
merge my-branch
let's do the same as if pulling into an orphan branch: simply
fast-forward.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the context of the new --rebase-merges mode, which was designed
specifically to allow for changing the existing branch topology
liberally, a user may want to extract commits into a completely fresh
branch that starts with a newly-created root commit.
This is now possible by inserting the command `reset [new root]` before
`pick`ing the commit that wants to become a root commit. Example:
reset [new root]
pick 012345 a commit that is about to become a root commit
pick 234567 this commit will have the previous one as parent
This does not conflict with other uses of the `reset` command because
`[new root]` is not (part of) a valid ref name: both the opening bracket
as well as the space are illegal in ref names.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch extracts the code from is_index_unchanged() to initialize or
update the index' cache tree (i.e. a tree object reflecting the current
index' top-level tree).
The new helper will be used in the upcoming code to support `git rebase
-i --root` via the sequencer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ensure that we are hash algorithm agnostic, use the_hash_algo to look
up the object ID for the empty tree instead of using the empty_tree_oid
variable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert one use of EMPTY_TREE_SHA1_HEX to use empty_tree_oid_hex to
avoid a dependency on a given hash algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a series of fixup/squash commands, the interactive rebase builds
up a commit message with comments. This will be presented to the user in
the editor if at least one of those commands was a `squash`.
In any case, the commit message will be cleaned up eventually, removing
all those intermediate comments, in the final step of such a
fixup/squash chain.
However, if the last fixup/squash command in such a chain fails with
merge conflicts, and if the user then decides to skip it (or resolve it
to a clean worktree and then continue the rebase), the current code
fails to clean up the commit message.
This commit fixes that behavior.
The fix is quite a bit more involved than meets the eye because it is
not only about the question whether we are `git rebase --skip`ing a
fixup or squash. It is also about removing the skipped fixup/squash's
commit message from the accumulated commit message. And it is also about
the question whether we should let the user edit the final commit
message or not ("Was there a squash in the chain *that was not
skipped*?").
For example, in this case we will want to fix the commit message, but
not open it in an editor:
pick <- succeeds
fixup <- succeeds
squash <- fails, will be skipped
This is where the newly-introduced `current-fixups` file comes in real
handy. A quick look and we can determine whether there was a non-skipped
squash. We only need to make sure to keep it up to date with respect to
skipped fixup/squash commands. As a bonus, we can even avoid committing
unnecessarily, e.g. when there was only one fixup, and it failed, and
was skipped.
To fix only the bug where the final commit message was not cleaned up
properly, but without fixing the rest, would have been more complicated
than fixing it all in one go, hence this commit lumps together more than
a single concern.
For the same reason, this commit also adds a bit more to the existing
test case for the regression we just fixed.
The diff is best viewed with --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
