Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new hook_exists() function instead of find_hook() where the
latter was called in boolean contexts. This make subsequent changes in
a series where we further refactor the hook API clearer, as we won't
conflate wanting to get the path of the hook with checking for its
existence.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the find_hook() function from run-command.c to a new hook.c
library. This change establishes a stub library that's pretty
pointless right now, but will see much wider use with Emily Shaffer's
upcoming "configuration-based hooks" series.
Eventually all the hook related code will live in hook.[ch]. Let's
start that process by moving the simple find_hook() function over
as-is.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
Allow 'git merge' to operate without expanding a sparse index, at least
not immediately. The index still will be expanded in a few cases:
1. If the merge strategy is 'recursive', then we enable
command_requires_full_index at the start of the merge_recursive()
method. We expect sparse-index users to also have the 'ort' strategy
enabled.
2. With the 'ort' strategy, if the merge results in a conflicted file,
then we expand the index before updating the working tree. The loop
that iterates over the worktree replaces index entries and tracks
'origintal_cache_nr' which can become completely wrong if the index
expands in the middle of the operation. This safety valve is
important before that loop starts. A later change will focus this
to only expand if we indeed have a conflict outside of the
sparse-checkout cone.
3. Other merge strategies are executed as a 'git merge-X' subcommand,
and those strategies are currently protected with the
'command_requires_full_index' guard.
Some test updates are required, including a mistaken 'git checkout -b'
that did not specify the base branch, causing merges to be fast-forward
merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before spawning the auto maintenance, we need to make sure that we
release all open file handles to all the `.pack` files (and MIDX files
and commit-graph files and...) so that the maintenance process has the
freedom to delete those files.
So far, we did this manually every time before calling
`run_auto_maintenance()`. With the new `close_object_store` flag, we can
do that implicitly in that function, which is more robust because future
callers won't be able to forget to close the object store.
Note: this changes behavior slightly, as we previously _always_ closed
the object store, but now we only close the object store when actually
running the auto maintenance. In practice, this should not matter (if
anything, it might speed up operations where auto maintenance is
disabled).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `ort` instead of `recursive` as the default merge strategy.
* en/ort-becomes-the-default:
Update docs for change of default merge backend
Change default merge backend from recursive to ort
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c4a09cc9cc (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d540b70c85 (merge: cleanup messages like commit, 2019-04-17) adds
a way to change part of the helper text using a single call to
strbuf_add_commented_addf but with two formats with varying number
of parameters.
this trigger a warning in old versions of Xcode (ex 8.0), so use
instead two independent calls with a matching number of parameters
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few reasons to switch the default:
* Correctness
* Extensibility
* Performance
I'll provide some summaries about each.
=== Correctness ===
The original impetus for a new merge backend was to fix issues that were
difficult to fix within recursive's design. The success with this goal
is perhaps most easily demonstrated by running the following:
$ git grep -2 KNOWN_FAILURE t/ | grep -A 4 GIT_TEST_MERGE_ALGORITHM
$ git grep test_expect_merge_algorithm.failure.success t/
$ git grep test_expect_merge_algorithm.success.failure t/
In order, these greps show:
* Seven sets of submodule tests (10 total tests) that fail with
recursive but succeed with ort
* 22 other tests that fail with recursive, but succeed with ort
* 0 tests that pass with recursive, but fail with ort
=== Extensibility ===
Being able to perform merges without touching the working tree or index
makes it possible to create new features that were difficult with the
old backend:
* Merging, cherry-picking, rebasing, reverting in bare repositories...
or just on branches that aren't checked out.
* `git diff AUTO_MERGE` -- ability to see what changes the user has
made to resolve conflicts so far (see commit 5291828df8 ("merge-ort:
write $GIT_DIR/AUTO_MERGE whenever we hit a conflict", 2021-03-20)
* A --remerge-diff option for log/show, used to show diffs for merges
that display the difference between what an automatic merge would
have created and what was recorded in the merge. (This option will
often result in an empty diff because many merges are clean, but for
the non-clean ones it will show how conflicts were fixed including
the removal of conflict markers, and also show additional changes
made outside of conflict regions to e.g. fix semantic conflicts.)
* A --remerge-diff-only option for log/show, similar to --remerge-diff
but also showing how cherry-picks or reverts differed from what an
automatic cherry-pick or revert would provide.
The last three have been implemented already (though only one has been
submitted upstream so far; the others were waiting for performance work
to complete), and I still plan to implement the first one.
=== Performance ===
I'll quote from the summary of my final optimization for merge-ort
(while fixing the testcase name from 'no-renames' to 'few-renames'):
Timings
Infinite
merge- merge- Parallelism
recursive recursive of rename merge-ort
v2.30.0 current detection current
---------- --------- ----------- ---------
few-renames: 18.912 s 18.030 s 11.699 s 198.3 ms
mega-renames: 5964.031 s 361.281 s 203.886 s 661.8 ms
just-one-mega: 149.583 s 11.009 s 7.553 s 264.6 ms
Speedup factors
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
few-renames: 1 1.05 1.6 95
mega-renames: 1 16.5 29 9012
just-one-mega: 1 13.6 20 565
And, for partial clone users:
Factor reduction in number of objects needed
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
mega-renames: 1 1 1 181.3
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two locations in the code that referred to 'merge-recursive'
but which were also applicable to 'merge-ort'. Update them to more
general wording.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
merge_name() calls dwim_ref(), which allocates a new string into
found_ref. Therefore add a free() to avoid leaking found_ref.
LSAN output from t0021:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa8beb8 in xstrdup wrapper.c:29:14
#2 0x954054 in expand_ref refs.c:671:12
#3 0x953cb6 in repo_dwim_ref refs.c:644:22
#4 0x5d3759 in dwim_ref refs.h:162:9
#5 0x5d3759 in merge_name builtin/merge.c:517:6
#6 0x5d3759 in collect_parents builtin/merge.c:1214:5
#7 0x5cf60d in cmd_merge builtin/merge.c:1458:16
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6bdbfd in main common-main.c:52:11
#13 0x7f0430502349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable 'best_strategy' holds the name of the merge strategy that
resulted in fewer conflicts, if several strategies were tried. When
that's the case but the best strategy was not the first one tried, we
inform the user which strategy was the "best" one before recreating the
merge and leaving the conflicted files in the tree.
This informational message is missing the word "strategy", so it shows
something like:
Using the recursive to prepare resolving by hand.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning about pulling without specifying how to reconcile divergent
branches says that after setting pull.rebase to true, --ff-only can
still be passed on the command line to require a fast-forward. Make that
actually work.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[en: updated tests; note 3 fixes and 1 new failure]
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These strings have not been modified in any translation, nor should they
be.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of git-merge from shell to C in 1c7b76be7d (Build in merge,
2008-07-07) accidentally transformed the message:
Already up-to-date. (nothing to squash)
to:
(nothing to squash)Already up-to-date.
due to reversed printf() arguments. This problem has gone unnoticed
despite being touched over the years by 7f87aff22c (Teach/Fix pull/fetch
-q/-v options, 2008-11-15) and bacec47845 (i18n: git-merge basic
messages, 2011-02-22), and tangentially by bef4830e88 (i18n: merge: mark
messages for translation, 2016-06-17) and 7560f547e6 (treewide: correct
several "up-to-date" to "up to date", 2017-08-23).
Fix it by restoring the message to its intended order. While at it, help
translators out by avoiding "sentence Lego".
[es: rewrote commit message]
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the various "Already up to date" messages resulting from merge
attempts share identical phrasing, they use a mix of punctuation ranging
from "." to "!" and even "Yeeah!", which leads to extra work for
translators. Ease the job of translators by settling upon "." as
punctuation for all such messages.
While at it, take advantage of printf_ln() to further ease the
translation task so translators need not worry about line termination,
and fix a case of missing line termination in the (unused)
merge_ort_nonrecursive() function.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
This function sets all the relevant flags to disabled state, so that
no code that checks only one of them get it wrong.
Then we call this new function everywhere where diff merges output
suppression is needed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425 (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a5 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for existence and delete CHERRY_PICK_HEAD through ref functions.
This will help cherry-pick work with alternate ref storage backends.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a merge with a single strategy, the result of evaluate_result() is
effectively not used and therefore is not needed, so avoid altogether.
On Windows, this optimization can halve the time required to perform a
recursive merge of a single commit with the LLVM repo.
Signed-off-by: Andrew Ng <andrew.ng@sony.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "am", "commit", "merge" and "rebase", when they are run with
the "--quiet" option, to pass "--quiet" down to "gc --auto".
* jc/auto-gc-quiet:
auto-gc: pass --quiet down from am, commit, merge and rebase
auto-gc: extract a reusable helper from "git fetch"
These commands take the --quiet option for their own operation, but
they forget to pass the option down when they invoke "git gc --auto"
internally.
Teach them to do so using the run_auto_gc() helper we added in the
previous step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame" learns to take advantage of the "changed-paths" Bloom
filter stored in the commit-graph file.
* ds/blame-on-bloom:
test-bloom: check that we have expected arguments
test-bloom: fix some whitespace issues
blame: drop unused parameter from maybe_changed_path
blame: use changed-path Bloom filters
tests: write commit-graph with Bloom filters
revision: complicated pathspecs disable filters
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_COMMIT_GRAPH environment variable updates the commit-
graph file whenever "git commit" is run, ensuring that we always
have an updated commit-graph throughout the test suite. The
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS environment variable was
introduced to write the changed-path Bloom filters whenever "git
commit-graph write" is run. However, the GIT_TEST_COMMIT_GRAPH
trick doesn't launch a separate process and instead writes it
directly.
To expand the number of tests that have commits in the commit-graph
file, add a helper method that computes the commit-graph and place
that helper inside "git commit" and "git merge".
In the helper method, check GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS
to ensure we are writing changed-path Bloom filters whenever
possible.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using `starts_with()`, the magic number 7, `strlen()` and a
fair number of additions to verify the three parts of the config key
"branch.<branch>.mergeoptions", use `skip_prefix()` to jump through them
more explicitly.
We need to introduce a new variable for this (we certainly can't modify
`k` just because we see "branch."!). With `skip_prefix()` we often use
quite bland names like `p` or `str`. Let's do the same. If and when this
function needs to do more prefix-skipping, we'll have a generic variable
ready for this.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] 9674c1991d/scripts/verify-git-tag (L43)
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
Use the 'refresh_and_write_cache()' convenience function introduced in
the last commit, instead of refreshing and writing the index manually
in merge.c
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Analogous to commit, introduce a '--no-verify' option which bypasses the
pre-merge-commit hook. The shorthand '-n' is taken by '--no-stat'
already.
[js: * reworded commit message to reflect current state of --no-stat flag
and new hook name
* fixed flag documentation to reflect new hook name
* cleaned up trailing whitespace
* squashed test changes from the original series' patch 4/4
* modified tests to follow pattern from this series' patch 1/4
* added a test case for --no-verify with non-executable hook
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge does not honor the pre-commit hook when doing automatic merge
commits, and for compatibility reasons this is going to stay.
Introduce a pre-merge-commit hook which is called for an automatic merge
commit just like pre-commit is called for a non-automatic merge commit
(or any other commit).
[js: * renamed hook from "pre-merge" to "pre-merge-commit"
* only discard the index if the hook is actually present
* expanded githooks documentation entry
* clarified that hook should write messages to stderr
* squashed test changes from the original series' patch 4/4
* modified tests to follow new pattern from this series' patch 1/4
* added a test case for non-executable merge hooks
* added a test case for failed merges
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
* reworded commit message
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f8b863598c ("builtin/merge: honor commit-msg hook for merges", 2017-09-07)
introduced the no-verify flag to merge for bypassing the commit-msg
hook, though in a different way from the implementation in commit.c.
Change the implementation in merge.c to be the same as in commit.c so
that both do the same in the same way. This also changes the output of
"git merge --help" to be more clear that the hook return code is
respected by default.
[js: * reworded commit message
* squashed documentation changes from original series' patch 3/4
]
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
The cmd_merge() function has a loop that tries different
merge strategies in turn, and stops when a strategy gets a
clean merge, while keeping the "best" conflicted merge so
far.
Make the loop easier to follow by moving the code around,
ensuring that there is only one "break" in the loop where
an automerge succeeds. Also group the actions that are
performed after an automerge succeeds together to a single
location, outside and after the loop.
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.
* nd/merge-quit:
merge: add --quit
merge: remove drop_save() in favor of remove_merge_branch_state()
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert option_commit to tristate, representing the states of
'default/untouched', 'enabled-by-cli', 'disabled-by-cli'. With this in
place, check whether option_commit was enabled by cli when squashing a
merge. If so, error out, as this is not supported.
Previously, when --squash was supplied, 'option_commit' was silently
dropped. This could have been surprising to a user who tried to override
the no-commit behavior of squash using --commit explicitly.
Add a note to the --squash option for git-merge to clarify the
incompatibility, and add a test case to t7600-merge.sh
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Rafael Ascensão <rafa.almas@gmail.com>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Vishal Verma <vishal@stellar.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to cancel the current merge without resetting worktree/index,
which is what --abort is for. Like other --quit(s), this is often used
when you forgot that you're in the middle of a merge and already
switched away, doing different things. By the time you've realized, you
can't even continue the merge anymore.
This also makes all in-progress commands, am, merge, rebase, revert and
cherry-pick, take all three --abort, --continue and --quit (bisect has a
different UI).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both remove_branch_state() and drop_save() delete almost the same set of
files about the current merge state. The only difference is MERGE_RR but
it should also be cleaned up after a successful merge, which is what
drop_save() is for.
Make a new function that deletes all merge-related state files and use
it instead of drop_save(). This function will also be used in the next
patch that introduces --quit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Next, if commit.cleanup = scissors is specified, don't produce a
scissors line in commit if one already exists in the MERGE_MSG file.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
"git merge" and "git pull" that merges into an unborn branch used
to completely ignore "--verify-signatures", which has been
corrected.
* jk/verify-sig-merge-into-void:
pull: handle --verify-signatures for unborn branch
merge: handle --verify-signatures for unborn branch
merge: extract verify_merge_signature() helper
Since we're going to pass 'struct repository *' around most of the
time instead of 'struct index_state *' because most sequencer.c
operations need more than just the index, the_repository is replaced
as well in the functions that now take 'struct repository
*'. the_repository is still present in this file, but total clean up
will be done later. It's not the main focus of this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce optname() that does the early half of original opterror() to
come up with the name of the option reported back to the user, and use
it to kill opterror(). The callers of opterror() now directly call
error() using the string returned by opterror() instead.
There are a few issues with opterror()
- it tries to assemble an English sentence from pieces. This is not
great for translators because we give them pieces instead of a full
sentence.
- It's a wrapper around error() and needs some hack to let the
compiler know it always returns -1.
- Since it takes a string instead of printf format, one call site has
to assemble the string manually before passing to it.
Using error() directly solves the second and third problems.
It kind helps the first problem as well because "%s does foo" does
give a translator a full sentence in a sense and let them reorder if
needed. But it has limitations, if the subject part has to change
based on the rest of the sentence, that language is screwed. This is
also why I try to avoid calling optname() when 'flags' is known in
advance.
Mark of these strings for translation as well while at there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be part of translated messages. To make sure we
don't have a sentence with mixed languages, mark the strings for
translation, but only use translated strings in places we know we will
output translated strings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-merge sees that we are on an unborn branch (i.e., there is no
HEAD), it follows a totally separate code path than the usual merge
logic. This code path does not know about verify_signatures, and so we
fail to notice bad or missing signatures.
This has been broken since --verify-signatures was added in efed002249
(merge/pull: verify GPG signatures of commits being merged, 2013-03-31).
In an ideal world, we'd unify the flow for this case with the regular
merge logic, which would fix this bug and avoid introducing similar
ones. But because the unborn case is so different, it would be a burden
on the rest of the function to continually handle the missing HEAD. So
let's just port the verification check to this special case.
Reported-by: Felix Eckhofer <felix@eckhofer.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to implement "merge --verify-signatures" is inline in
cmd_merge(), but this site misses some cases. Let's extract the logic
into a function so we can call it from more places.
We'll move it to commit.[ch], since one of the callers (git-pull) is
outside our source file. This function isn't all that general (after
all, its main function is to exit the program) but it's not worth trying
to fix that. The heavy lifting is done by check_commit_signature(), and
our purpose here is just sharing the die() logic. We'll mark it with a
comment to make that clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
