When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_CMDMODE mechanism was introduced in the release of 1.8.5 to actively
notice when multiple "operation mode" options that specify mutually
incompatible operation modes are given.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it makes sense to allow merging unrelated histories of two
projects that started independently into one, in the way "gitk" was
merged to "git" itself aka "the coolest merge ever", such a merge is
still an unusual event. Worse, if somebody creates an independent
history by starting from a tarball of an established project and
sends a pull request to the original project, "git merge" however
happily creates such a merge without any sign of something unusual
is happening.
Teach "git merge" to refuse to create such a merge by default,
unless the user passes a new "--allow-unrelated-histories" option to
tell it that the user is aware that two unrelated projects are
merged.
Because such a "two project merge" is a rare event, a configuration
option to always allow such a merge is not added.
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do so
and instead leaves it as low-hanging fruit for others, because such
a "two project merge" would be done after fetching the other project
into some location in the working tree of an existing project and
making sure how well they fit together, it is sufficient to allow a
local merge without such an option pass-through from "git pull" to
"git merge". Many tests that are updated by this patch does the
pass-through manually by turning:
git pull something
into its equivalent:
git fetch something &&
git merge --allow-unrelated-histories FETCH_HEAD
If somebody is inclined to add such an option, updated tests in this
change need to be adjusted back to:
git pull --allow-unrelated-histories something
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `tag.forcesignannotated` configuration variable makes "git tag"
that would implicitly create an annotated tag to instead create a
signed tag. For example
$ git tag -m "This is a message" tag-with-message
$ git tag -F message-file tag-with-message
would create a signed tag if the configuration variable is in
effect. To override this from the command line, the user can
explicitly ask for an annotated tag, like so:
$ git tag -a -m "This is a message" tag-with-message
$ git tag -a -F message-file tag-with-message
Creation of a light-weight tag, i.e.
$ git tag lightweight
is not affected.
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.autoStash configuration variable is set, there is no way to
override it for "git pull --rebase" from the command line.
Teach "git pull --rebase" the --[no-]autostash command line flag which
overrides the current value of rebase.autoStash, if set. As "git rebase"
understands the --[no-]autostash option, it's just a matter of passing
the option to underlying "git rebase" when "git pull --rebase" is called.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Paul Tan <pyokagan@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.5:
Git 2.5.5
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
* maint-2.4:
Git 2.4.11
list-objects: pass full pathname to callbacks
list-objects: drop name_path entirely
list-objects: convert name_path to a strbuf
show_object_with_name: simplify by using path_name()
http-push: stop using name_path
tree-diff: catch integer overflow in combine_diff_path allocation
add helpers for detecting size_t overflow
The two alternative ways to spell "ssh://" transport have been
deprecated for a long time. The last mention of them has finally
removed from the documentation.
* cn/deprecate-ssh-git-url:
Disown ssh+git and git+ssh
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the area of globs applicability for branches and tags
in git-svn. It is now possible to use globs like 'a*e', or 'release_*'.
This allows users to avoid long lines in config like:
branches = branches/{release_20,release_21,release_22,...}
In favor of:
branches = branches/release_*
[ew: amended commit message, minor formatting and style fixes]
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
There are no more callers, and it's a rather confusing
interface. This could just be folded into
git_config_with_options(), but for the sake of readability,
we'll leave it as a separate (static) helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation did not clearly state that the 'simple' mode is
now the default for "git push" when push.default configuration is
not set.
* mm/push-simple-doc:
Documentation/git-push: document that 'simple' is the default
* jk/tighten-alloc: (23 commits)
compat/mingw: brown paper bag fix for 50a6c8e
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
...
Some people argue that these were silly from the beginning (see
http://thread.gmane.org/gmane.comp.version-control.git/285590/focus=285601
for example), but we have to support them for compatibility.
That doesn't mean we have to show them in the documentation. These
were already left out of the main list, but a reference in the main
manpage was left, so remove that.
Also add a note to discourage their use if anybody goes looking for them
in the source code.
Signed-off-by: Carlos Martín Nieto <cmn@dwim.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also document another limitation coming from a bug in handling the
basename match with a directory for 're-inclusion'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we started allowing an exact object name to be fetched from the
command line, we forgot to update the documentation.
Signed-off-by: Gabriel Souza Franco <gabrielfrancosouza@gmail.com>
--
Documentation/git-fetch-pack.txt | 4 ++++
1 file changed, 4 insertions(+)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wording is introduced in c3f0baaca (Documentation: sync git.txt
command list and manual page title, 2007-01-18), but rebase has evolved
since then, capture the modern usage by being more generic about the
rebase command in the summary.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just pass it along to "git submodule update", which may pick reasonable
defaults if you don't specify an explicit number.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose possible parallelism either via the "--jobs" CLI parameter or
the "submodule.fetchJobs" setting.
By having the variable initialized to -1, we make sure 0 can be passed
into the parallel processing machine, which will then pick as many parallel
workers as there are CPUs.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to configure fetching and updating in parallel
without having the command line option.
This moved the responsibility to determine how many parallel processes
to start from builtin/fetch to submodule.c as we need a way to communicate
"The user did not specify the number of parallel processes in the command
line options" in the builtin fetch. The submodule code takes care of
the precedence (CLI > config > default).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--get does not fail if a key is multi-valued, it returns the last value
as described in its documentation. Clarify the description of --get-all
to avoid implying that --get does fail in this case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a numbered list is confusing because the exit codes are not listed
in order so the numbers at the start of each line do not match the exit
codes described by the following text. Switch to a bulleted list so
that the only number appearing on each line is the exit code described.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --get, --get-all and --get-regexp options to git-config exit with
status 1 if the key is not found but --get-urlmatch succeeds in this
case.
Change --get-urlmatch to behave in the same way as the other --get*
options so that all four are consistent. --get-color is a special case
because it accepts a default value to return and so should not return an
error if the key is not found.
Also clarify this behaviour in the documentation.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch hunk selector of add--interactive knows how ask
git for colorized diffs, and correlate them with the
uncolored diffs we apply. But there's not any way for
somebody who uses a diff-filter tool like contrib's
diff-highlight to see their normal highlighting.
This patch lets users define an arbitrary shell command to
pipe the colorized diff through. The exact output shouldn't
matter (since we just show the result to humans) as long as
it is line-compatible with the original diff (so that
hunk-splitting can split the colorized version, too).
I left two minor issues with the new system that I don't
think are worth fixing right now, but could be done later:
1. We only filter colorized diffs. Theoretically a user
could want to filter a non-colorized diff, but I find
it unlikely in practice. Users who are doing things
like diff-highlighting are likely to want color, too.
2. add--interactive will re-colorize a diff which has been
hand-edited, but it won't have run through the filter.
Fixing this is conceptually easy (just pipe the diff
through the filter), but practically hard to do without
using tempfiles (it would need to feed data to and read
the result from the filter without deadlocking; this
raises portability questions with respect to Windows).
I've punted on both issues for now, and if somebody really
cares later, they can do a patch on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a new DEVELOPER knob that enables many compiler warning
options in the Makefile.
* ls/makefile-cflags-developer-tweak:
add DEVELOPER makefile knob to check for acknowledged warnings
The documentation did not clearly state that the 'simple' mode is
now the default for "git push" when push.default configuration is
not set.
* mm/push-simple-doc:
Documentation/git-push: document that 'simple' is the default
The "credential-cache" daemon process used to run in whatever
directory it happened to start in, but this made umount(2)ing the
filesystem that houses the repository harder; now the process
chdir()s to the directory that house its own socket on startup.
* jg/credential-cache-chdir-to-sockdir:
credential-cache--daemon: change to the socket dir on startup
credential-cache--daemon: disallow relative socket path
credential-cache--daemon: refactor check_socket_directory
The configuration system has been taught to phrase where it found a
bad configuration variable in a better way in its error messages.
"git config" learnt a new "--show-origin" option to indicate where
the values come from.
* ls/config-origin:
config: add '--show-origin' option to print the origin of a config value
config: add 'origin_type' to config_source struct
rename git_config_from_buf to git_config_from_mem
t: do not hide Git's exit code in tests using 'nul_to_q'
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
The ref-filter's format-parsing code has been refactored, in
preparation for "branch --format" and friends.
* kn/ref-filter-atom-parsing:
ref-filter: introduce objectname_atom_parser()
ref-filter: introduce contents_atom_parser()
ref-filter: introduce remote_ref_atom_parser()
ref-filter: align: introduce long-form syntax
ref-filter: introduce align_atom_parser()
ref-filter: introduce parse_align_position()
ref-filter: introduce color_atom_parser()
ref-filter: introduce parsing functions for each valid atom
ref-filter: introduce struct used_atom
ref-filter: bump 'used_atom' and related code to the top
ref-filter: use string_list_split over strbuf_split
Sine the credential.helper key is a multi-valued config
list, there's no way to "unset" a helper once it's been set.
So if your system /etc/gitconfig sets one, you can never
avoid running it, but only add your own helpers on top.
Since an empty value for credential.helper is nonsensical
(it would just try to run "git-credential-"), we can assume
nobody is using it. Let's define it to reset the helper
list, letting you override lower-priority instances which
have come before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We assume Git developers have a reasonably modern compiler and recommend
them to enable the DEVELOPER makefile knob to ensure their patches are
clear of all compiler warnings the Git core project cares about.
Enable the DEVELOPER makefile knob in the Travis-CI build.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description was misleading, since "set to any boolean value" include
"set to false", and diff.renames=false does not enable basic detection,
but actually disables it. Also, document that diff.renames only affects
Porcelain.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another try to add support to the ignore mechanism that lets you
say "this is excluded" and then later say "oh, no, this part (that
is a subset of the previous part) is not excluded".
* nd/exclusion-regression-fix:
dir.c: don't exclude whole dir prematurely
dir.c: support marking some patterns already matched
dir.c: support tracing exclude
dir.c: fix match_pathname()
You can now set http.[<url>.]pinnedpubkey to specify the pinned
public key when building with recent enough versions of libcURL.
* ce/https-public-key-pinning:
http: implement public key pinning
Some authentication methods do not need username or password, but
libcurl needs some hint that it needs to perform authentication.
Supplying an empty username and password string is a valid way to
do so, but you can set the http.[<url>.]emptyAuth configuration
variable to achieve the same, if you find it cleaner.
* bc/http-empty-auth:
http: add option to try authentication without username
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
The default behavior is well documented already in git-config(1), but
git-push(1) itself did not mention it at all. For users willing to learn
how "git push" works but not how to configure it, this makes the
documentation cumbersome to read.
Make the git-push(1) page self-contained by adding a short summary of
what 'push.default=simple' does, early in the page.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Relative socket paths are dangerous since the user cannot generally
control when the daemon starts (initially, after a timeout, kill or
crash). Since the daemon creates but does not delete the socket
directory, this could lead to spurious directory creation relative
to the users cwd.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual pattern for an argv array is to initialize it,
push in some strings, and then clear it when done. Very
occasionally, though, we must do other exotic things with
the memory, like freeing the list but keeping the strings.
Let's provide a detach function so that callers can make use
of our API to build up the array, and then take ownership of
it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for "git clean" has been corrected; it mentioned
that .git/modules/* are removed by giving two "-f", which has never
been the case.
* mm/clean-doc-fix:
Documentation/git-clean.txt: don't mention deletion of .git/modules/*
If config values are queried using 'git config' (e.g. via --get,
--get-all, --get-regexp, or --list flag) then it is sometimes hard to
find the configuration file where the values were defined.
Teach 'git config' the '--show-origin' option to print the source
configuration file for every printed value.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce optional prefixes "width=" and "position=" for the align atom
so that the atom can be used as "%(align:width=<width>,position=<position>)".
Add Documentation and tests for the same.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strategy option find-renames, following git-diff interface. This
makes the option rename-threshold redundant.
Signed-off-by: Felipe Gonçalves Assis <felipegassis@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive strategy turns on rename detection by default. Add a
strategy option to disable rename detection even for exact renames.
Signed-off-by: Felipe Gonçalves Assis <felipegassis@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for "git clean" has been corrected; it mentioned
that .git/modules/* are removed by giving two "-f", which has never
been the case.
* mm/clean-doc-fix:
Documentation/git-clean.txt: don't mention deletion of .git/modules/*
The "user.useConfigOnly" configuration variable can be used to
force the user to always set user.email & user.name configuration
variables, serving as a reminder for those who work on multiple
projects and do not want to put these in their $HOME/.gitconfig.
* da/user-useconfigonly:
ident: add user.useConfigOnly boolean for when ident shouldn't be guessed
fmt_ident: refactor strictness checks
It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
"git worktree" had a broken code that attempted to auto-fix
possible inconsistency that results from end-users moving a
worktree to different places without telling Git (the original
repository needs to maintain backpointers to its worktrees, but
"mv" run by end-users who are not familiar with that fact will
obviously not adjust them), which actually made things worse
when triggered.
* nd/do-not-move-worktree-manually:
worktree: stop supporting moving worktrees manually
worktree.c: fix indentation
Add the http.pinnedpubkey configuration option for public key
pinning. It allows any string supported by libcurl --
base64(sha256(pubkey)) or filename of the full public key.
If cURL does not support pinning (is too old) output a warning to the
user.
Signed-off-by: Christoph Egger <christoph@christoph-egger.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a pattern "!foo/bar", this patch makes it not exclude
"foo" right away. This gives us a chance to examine "foo" and
re-include "foo/bar".
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Micha Wiedenmann <mw-u2@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Performing GSS-Negotiate authentication using Kerberos does not require
specifying a username or password, since that information is already
included in the ticket itself. However, libcurl refuses to perform
authentication if it has not been provided with a username and password.
Add an option, http.emptyAuth, that provides libcurl with an empty
username and password to make it attempt authentication anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As described in the commit message of 9b25a0b (config: add
include directive, 2012-02-06), the `--include` option is
only on by default in some cases. But our documentation
described it as just "defaults to on", which doesn't tell
the whole story.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "<branch>^{/!-<pattern>}" notation can be used to name a
commit that is reachable from <branch> that does not match the
given <pattern>.
* wp/sha1-name-negative-match:
object name: introduce '^{/!-<negative pattern>}' notation
test for '!' handling in rev-parse's named commits
"git worktree" had a broken code that attempted to auto-fix
possible inconsistency that results from end-users moving a
worktree to different places without telling Git (the original
repository needs to maintain backpointers to its worktrees, but
"mv" run by end-users who are not familiar with that fact will
obviously not adjust them), which actually made things worse
when triggered.
* nd/do-not-move-worktree-manually:
worktree: stop supporting moving worktrees manually
worktree.c: fix indentation
The latter half of this sentence, the removal of the submodules, was
never done with (or without) double -f back when it was written, and
we still do not do so.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that:
git config --global user.email "(none)"
was a viable way for people to force themselves to set user.email in
each repository. This was helpful for people with more than one
email address, targeting different email addresses for different
clones, as it barred git from creating a commit unless the user.email
config was set in the per-repo config to the correct email address.
A recent change, 19ce497c (ident: keep a flag for bogus
default_email, 2015-12-10), however, declared that an explicitly
configured user.email is not bogus, no matter what its value is, so
this hack no longer works.
Provide the same functionality by adding a new configuration
variable user.useConfigOnly; when this variable is set, the
user must explicitly set user.email configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Dan Aloni <alonid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
Drop a few old "todo" items by deciding that the change one of them
suggests is not such a good idea, and doing the change the other
one suggested to do.
* ss/user-manual:
user-manual: add addition gitweb information
user-manual: add section documenting shallow clones
glossary: define the term shallow clone
user-manual: remove temporary branch entry from todo list
"git tag" started listing a tag "foo" as "tags/foo" when a branch
named "foo" exists in the same repository; remove this unnecessary
disambiguation, which is a regression introduced in v2.7.0.
* jk/list-tag-2.7-regression:
tag: do not show ambiguous tag names as "tags/foo"
t6300: use test_atom for some un-modern tests
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
The documentation has been updated to hint the connection between
the '--signoff' option and DCO.
* dw/signoff-doc:
Expand documentation describing --signoff
New http.proxyAuthMethod configuration variable can be used to
specify what authentication method to use, as a way to work around
proxies that do not give error response expected by libcurl when
CURLAUTH_ANY is used. Also, the codepath for proxy authentication
has been taught to use credential API to store the authentication
material in user's keyrings.
* kf/http-proxy-auth-methods:
http: use credential API to handle proxy authentication
http: allow selection of proxy authentication method
"ls-remote" learned an option to show which branch the remote
repository advertises as its primary by pointing its HEAD at.
* tg/ls-remote-symref:
ls-remote: add support for showing symrefs
ls-remote: use parse-options api
ls-remote: fix synopsis
ls-remote: document --refs option
ls-remote: document --quiet option
"git tag" started listing a tag "foo" as "tags/foo" when a branch
named "foo" exists in the same repository; remove this unnecessary
disambiguation, which is a regression introduced in v2.7.0.
* jk/list-tag-2.7-regression:
tag: do not show ambiguous tag names as "tags/foo"
t6300: use test_atom for some un-modern tests
To name a commit, you can now use the :/!-<negative pattern> regex
style, and consequentially, say
$ git rev-parse HEAD^{/!-foo}
and it will return the hash of the first commit reachable from HEAD,
whose commit message does not contain "foo". This is the opposite of the
existing <rev>^{/<pattern>} syntax.
The specific use-case this is intended for is to perform an operation,
excluding the most-recent commits containing a particular marker. For
example, if you tend to make "work in progress" commits, with messages
beginning with "WIP", you work, then it could be useful to diff against
"the most recent commit which was not a WIP commit". That sort of thing
now possible, via commands such as:
$ git diff @^{/!-^WIP}
The leader '/!-', rather than simply '/!', to denote a negative match,
is chosen to leave room for additional modifiers in the future.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"interpret-trailers" has been taught to optionally update a file in
place, instead of always writing the result to the standard output.
* tk/interpret-trailers-in-place:
interpret-trailers: add option for in-place editing
trailer: allow to write to files other than stdout
When we know that mtime on directory as given by the environment
is usable for the purpose of untracked cache, we may want the
untracked cache to be always used without any mtime test or
kernel name check being performed.
Also when we know that mtime is not usable for the purpose of
untracked cache, for example because the repo is shared over a
network file system, we may want the untracked-cache to be
automatically removed from the index.
Allow the user to express such preference by setting the
'core.untrackedCache' configuration variable, which can take
'keep', 'false', or 'true' and default to 'keep'.
When read_index_from() is called, it now adds or removes the
untracked cache in the index to respect the value of this
variable. So it does nothing if the value is `keep` or if the
variable is unset; it adds the untracked cache if the value is
`true`; and it removes the cache if the value is `false`.
`git update-index --[no-|force-]untracked-cache` still adds the
untracked cache to, or removes it, from the index, but this
shows a warning if it goes against the value of
core.untrackedCache, because the next time the index is read
the untracked cache will be added or removed if the
configuration is set to do so.
Also `--untracked-cache` used to check that the underlying
operating system and file system change `st_mtime` field of a
directory if files are added or deleted in that directory. But
because those tests take a long time, `--untracked-cache` no
longer performs them. Instead, there is now
`--test-untracked-cache` to perform the tests. This change
makes `--untracked-cache` the same as `--force-untracked-cache`.
This last change is backward incompatible and should be
mentioned in the release notes.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
read-cache: Duy'sfixup
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to notice format.outputDirectory
configuration variable. This allows "-o <dir>" option to be
omitted on the command line if you always use the same directory in
your workflow.
* ak/format-patch-odir-config:
format-patch: introduce format.outputDirectory configuration
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
Since b7cc53e9 (tag.c: use 'ref-filter' APIs, 2015-07-11),
git-tag has started showing tags with ambiguous names (i.e.,
when both "heads/foo" and "tags/foo" exists) as "tags/foo"
instead of just "foo". This is both:
- pointless; the output of "git tag" includes only
refs/tags, so we know that "foo" means the one in
"refs/tags".
and
- ambiguous; in the original output, we know that the line
"foo" means that "refs/tags/foo" exists. In the new
output, it is unclear whether we mean "refs/tags/foo" or
"refs/tags/tags/foo".
The reason this happens is that commit b7cc53e9 switched
git-tag to use ref-filter's "%(refname:short)" output
formatting, which was adapted from for-each-ref. This more
general code does not know that we care only about tags, and
uses shorten_unambiguous_ref to get the short-name. We need
to tell it that we care only about "refs/tags/", and it
should shorten with respect to that value.
In theory, the ref-filter code could figure this out by us
passing FILTER_REFS_TAGS. But there are two complications
there:
1. The handling of refname:short is deep in formatting
code that does not even have our ref_filter struct, let
alone the arguments to the filter_ref struct.
2. In git v2.7.0, we expose the formatting language to the
user. If we follow this path, it will mean that
"%(refname:short)" behaves differently for "tag" versus
"for-each-ref" (including "for-each-ref refs/tags/"),
which can lead to confusion.
Instead, let's add a new modifier to the formatting
language, "strip", to remove a specific set of prefix
components. This fixes "git tag", and lets users invoke the
same behavior from their own custom formats (for "tag" or
"for-each-ref") while leaving ":short" with its same
consistent meaning in all places.
We introduce a test in t7004 for "git tag", which fails
without this patch. We also add a similar test in t3203 for
"git branch", which does not actually fail. But since it is
likely that "branch" will eventually use the same formatting
code, the test helps defend against future regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the only way to pass proxy credentials to curl is by including them
in the proxy URL. Usually, this means they will end up on disk unencrypted, one
way or another (by inclusion in ~/.gitconfig, shell profile or history). Since
proxy authentication often uses a domain user, credentials can be security
sensitive; therefore, a safer way of passing credentials is desirable.
If the configured proxy contains a username but not a password, query the
credential API for one. Also, make sure we approve/reject proxy credentials
properly.
For consistency reasons, add parsing of http_proxy/https_proxy/all_proxy
environment variables, which would otherwise be evaluated as a fallback by curl.
Without this, we would have different semantics for git configuration and
environment variables.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CURLAUTH_ANY does not work with proxies which answer unauthenticated requests
with a 307 redirect to an error page instead of a 407 listing supported
authentication methods. Therefore, allow the authentication method to be set
using the environment variable GIT_HTTP_PROXY_AUTHMETHOD or configuration
variables http.proxyAuthmethod and remote.<name>.proxyAuthmethod (in analogy
to http.proxy and remote.<name>.proxy).
The following values are supported:
* anyauth (default)
* basic
* digest
* negotiate
* ntlm
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is nice to just be able to test if untracked cache is
supported without enabling it.
Helped-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current update_linked_gitdir() has a bug that can create "gitdir"
file in non-multi-worktree setup. Worse, sometimes it can write relative
path to "gitdir" file, which will not work (e.g. "git worktree list"
will display the worktree's location incorrectly)
Instead of fixing this, we step back a bit. The original design was
probably not well thought out. For now, if the user manually moves a
worktree, they have to fix up "gitdir" file manually or the worktree
will get pruned.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage of working directory is inconsistent in the git add help.
Also http://git-scm.com/docs/git-clone speaks only about working tree.
Remaining entry found by "git grep -B1 '^directory' git-add.txt" really
relates to a directory.
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
asciidoctor does not remove backslashes used to escape curly brackets from
the HTML output if the contents of the curly brackets are empty or contain
at least a <, -, or space. asciidoc does not require the backslashes in
these cases, so just remove them.
Signed-off-by: Matthew Kraai <matt.kraai@abbott.com>
Reported-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" by default does not fall back to its "--no-index"
behaviour outside a directory under Git's control (otherwise the
user may by mistake end up running a huge recursive search); with a
new configuration (set in $HOME/.gitconfig--by definition this
cannot be set in the config file per project), this safety can be
disabled.
* tg/grep-no-index-fallback:
builtin/grep: add grep.fallbackToNoIndex config
t7810: correct --no-index test
Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
The documentation has been updated to hint the connection between
the '--signoff' option and DCO.
* dw/signoff-doc:
Expand documentation describing --signoff
Drop a few old "todo" items by deciding that the change one of them
suggests is not such a good idea, and doing the change the other
one suggested to do.
* ss/user-manual:
user-manual: add addition gitweb information
user-manual: add section documenting shallow clones
glossary: define the term shallow clone
user-manual: remove temporary branch entry from todo list
Some "git notes" operations, e.g. "git log --notes=<note>", should
be able to read notes from any tree-ish that is shaped like a notes
tree, but the notes infrastructure required that the argument must
be a ref under refs/notes/. Loosen it to require a valid ref only
when the operation would update the notes (in which case we must
have a place to store the updated notes tree, iow, a ref).
* mh/notes-allow-reading-treeish:
notes: allow treeish expressions as notes ref
Sometimes it's useful to know the main branch of a git repository
without actually downloading the repository. This can be done by
looking at the symrefs stored in the remote repository. Currently git
doesn't provide a simple way to show the symrefs stored on the remote
repository, even though the information is available. Add a --symref
command line argument to the ls-remote command, which shows the symrefs
in the remote repository.
While there, replace a literal tab in the format string with \t to make
it more obvious to the reader.
Suggested-by: pedro rijo <pedrorijo91@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-remote takes an optional get-url argument, and specifying the
repository is optional. Fix the synopsis in the documentation to
reflect this.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --refs option was originally introduced in 2718ff0 ("Improve
git-peek-remote"). The ls-remote command was first documented in
972b6fe ("ls-remote: drop storing operation and add documentation."),
but the --refs option was never documented. Fix this.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cefb2a5e3 ("ls-remote: print URL when no repo is specified") added a
quiet option to ls-remote, but didn't add it to the documentation. Add
it.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in a cross-platform environment, a user may want to
check if text files are stored normalized in the repository and
if .gitattributes are set appropriately.
Make it possible to let Git show the line endings in the index and
in the working tree and the effective text/eol attributes.
The end of line ("eolinfo") are shown like this:
"-text" binary (or with bare CR) file
"none" text file without any EOL
"lf" text file with LF
"crlf" text file with CRLF
"mixed" text file with mixed line endings.
The effective text/eol attribute is one of these:
"", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf"
git ls-files --eol gives an output like this:
i/none w/none attr/text=auto t/t5100/empty
i/-text w/-text attr/-text t/test-binary-2.png
i/lf w/lf attr/text eol=lf t/t5100/rfc2047-info-0007
i/lf w/crlf attr/text eol=crlf doit.bat
i/mixed w/mixed attr/ locale/XX.po
to show what eol convention is used in the data in the index ('i'),
and in the working tree ('w'), and what attribute is in effect,
for each path that is shown.
Add test cases in t0027.
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line option --in-place to support in-place editing akin to
sed -i. This allows to write commands like the following:
git interpret-trailers --trailer "X: Y" a.txt > b.txt && mv b.txt a.txt
in a more concise way:
git interpret-trailers --trailer "X: Y" --in-place a.txt
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
"git blame" learned to produce the progress eye-candy when it takes
too much time before emitting the first line of the result.
* ea/blame-progress:
blame: add support for --[no-]progress option
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
"branch --delete" has "branch -d" but "push --delete" does not.
* ps/push-delete-option:
push: add '-d' as shorthand for '--delete'
push: add '--delete' flag to synopsis
init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.
There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.
Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.
With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original wording sounded as if --depth could only be used to deepen or
shorten the history of existing repos. However, that is not the case. In a
workflow like
$ git init
$ git remote add origin https://github.com/git/git.git
$ git fetch --depth=1
The newly initialized repo is properly created as a shallow repo.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not wrong to talk about "revisions" here, but in this context
revisions are always commits, and that is how we already name it in the
git-fetch docs. So align the docs by always referring to "commits".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 57534ee77d. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.
[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is confusing to document how --depth behaves as part of the
--single-branch docs. Better move that part to the --depth docs, saying
that it implies --single-branch by default.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify various document (man page) files to explain
in more detail what --signoff means.
This was inspired by https://lwn.net/Articles/669976/ where
paulj noted, "adding [the] '-s' argument to [a] git commit
doesn't really mean you have even heard of the DCO...".
Extending git's documentation will make it easier to argue
that developers understood --signoff when they use it.
Signed-off-by: David A. Wheeler <dwheeler@dwheeler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were introduced back in 2006 at 3175aa1ec2 but
never documented.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rework the section on gitweb to add information about the cgi script
and the instaweb command.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several places in the documentation that
the term shallow clone is used. Defining the term
enables its use elsewhere with a known definition.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the section on "How to check out a different version of a
project" the "new" branch is used as a temporary branch. A detached
HEAD was not used since it was a new feature introduced just a
couple weeks prior.
The section could be changed to use and explain a detached HEAD,
except that would increase the learning curve early in the manual.
Detached HEADs are discussed a couple sections later under
"Examining an old version without creating a new branch".
Let's declare that it is a bad idea to rewrite the example that
uses a temporary branch to do the sightseeing on a detached HEAD.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch" has learned a new option to zero-out the commit
object name on the mbox "From " line.
* bc/format-patch-null-from-line:
format-patch: check that header line has expected format
format-patch: add an option to suppress commit hash
sha1_file.c: introduce a null_oid constant
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
"git push" takes "--delete" but does not take a short form "-d",
unlike "git branch" which does take both. Bring consistency
between them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line) how
many threads to use when searching in the working tree files.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to show progress output when it takes long time to
produce the first line of output; this option cannot be used with
"--incremental" or "--porcelain" options.
git-annotate inherits the option as well.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
The delete flag is not mentioned in the synopsis of `git-push`.
Add the flag to make it more discoverable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This back-merges hopefully the last batch of trivially correct fixes
to the 2.6.x maintenance track from the master branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split index related options should appear in the 'SYNOPSIS'
section.
These options are already documented in the 'OPTIONS' section.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A changelist that contains only excluded files due to a client spec was
imported as an empty commit. Fix that issue by ignoring these commits.
Add option "git-p4.keepEmptyCommits" to make the previous behavior
available.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Pete Harlan
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
