Add a file .tsan-suppressions and list two functions in it: want_color()
and transfer_debug(). Both of these use the pattern
static int foo = -1;
if (foo < 0)
foo = bar();
where bar always returns the same non-negative value. This can cause
ThreadSanitizer to diagnose a race when foo is written from two threads.
That is indeed a race, although it arguably doesn't matter in practice
since it's always the same value that is written.
Add NEEDSWORK-comments to the functions so that this problem is not
forever swept way under the carpet.
The suppressions-file is used by setting the environment variable
TSAN_OPTIONS to, e.g., "suppressions=$(pwd)/.tsan-suppressions". Observe
that relative paths such as ".tsan-suppressions" might not work.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can use xsnprintf to do our truncation check with less
code. The error message isn't as specific, but the point is
that this isn't supposed to trigger in the first place
(because our buffer is big enough to handle any int).
Signed-off-by: Jeff King <peff@peff.net>
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
To push from or fetch to the current repository, remote helpers need
to know what repository that is. Accordingly, Git sets the GIT_DIR
environment variable to the path to the current repository when
invoking remote helpers.
There is a special case it does not handle: "git ls-remote" and "git
archive --remote" can be run to inspect a remote repository without
being run from any local repository. GIT_DIR is not useful in this
scenario:
- if we are not in a repository, we don't need to set GIT_DIR to
override an existing GIT_DIR value from the environment. If GIT_DIR
is present then we would be in a repository if it were valid and
would have called die() if it weren't.
- not setting GIT_DIR may cause a helper to do the usual discovery
walk to find the repository. But we know we're not in one, or we
would have found it ourselves. So in the worst case it may expend
a little extra effort to try to find a repository and fail (for
example, remote-curl would do this to try to find repository-level
configuration).
So leave GIT_DIR unset in this case. This makes GIT_DIR easier to
understand for remote helper authors and makes transport code less of
a special case for repository discovery.
Noticed using b1ef400e (setup_git_env: avoid blind fall-back to
".git", 2016-10-20) from 'next':
$ cd /tmp
$ git ls-remote https://kernel.googlesource.com/pub/scm/git/git
fatal: BUG: setup_git_env called without repository
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
The N_() no-op call currently marks the string to be extracted by
xgettext but doesn't trigger the retrieval of the translation at run
time, whereas _() does both. Meaning that, in spite of having
translations available, they were never retrieved to make use of them.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now we can handle two types, string and boolean, in
set_helper_option(). Later on we'll add string_list support, which does
not fit well. The new function strbuf_set_helper_option() can be reused
for a separate function that handles string-list.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our implementation of helpers never use CRLF line endings, and they
do not depend on the ability to place a CR as payload at the end of
the line, so this is essentially a no-op for in-tree users. However,
this allows third-party implementation of helpers to give us their
line with CRLF line ending (they cannot expect us to feed CRLF to
them, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now there is no direct caller to strbuf_getline(), we can demote it
to file-scope static that is private to strbuf.c and rename it to
strbuf_getdelim(). Rename strbuf_getline_crlf(), which is designed
to be the most "text friendly" variant, and allow it to take over
this simplest name, strbuf_getline(), so we can add more uses of it
without having to type _crlf over and over again in the coming
steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The client side codepaths in "git push" have been cleaned up
and the user can request to perform an optional "signed push",
i.e. sign only when the other end accepts signed push.
* db/push-sign-if-asked:
push: add a config option push.gpgSign for default signed pushes
push: support signing pushes iff the server supports it
builtin/send-pack.c: use parse_options API
config.c: rename git_config_maybe_bool_text and export it as git_parse_maybe_bool
transport: remove git_transport_options.push_cert
gitremote-helpers.txt: document pushcert option
Documentation/git-send-pack.txt: document --signed
Documentation/git-send-pack.txt: wrap long synopsis line
Documentation/git-push.txt: document when --signed may fail
Add a new flag --sign=true (or --sign=false), which means the same
thing as the original --signed (or --no-signed). Give it a third
value --sign=if-asked to tell push and send-pack to send a push
certificate if and only if the server advertised a push cert nonce.
If not, warn the user that their push may not be as secure as they
thought.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the return value of read_ref in 19 out of 21 cases.
This adds checks to the missing cases.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --signed" gave an incorrectly worded error message when
the other side did not support the capability.
* jc/push-cert:
transport-helper: fix typo in error message when --signed is not supported
"git fetch" over a remote-helper that cannot respond to "list"
command could not fetch from a symbolic reference e.g. HEAD.
* mh/deref-symref-over-helper-transport:
transport-helper: do not request symbolic refs to remote helpers
The transport-helper did not give transport options such as
verbosity, progress, cloning, etc. to import and export based
helpers, like it did for fetch and push based helpers, robbing them
the chance to honor the wish of the end-users better.
* mh/transport-capabilities:
transport-helper: ask the helper to set the same options for import as for fetch
transport-helper: ask the helper to set progress and verbosity options after asking for its capabilities
"git push --signed" gave an incorrectly worded error message when
the other side did not support the capability.
* jc/push-cert:
transport-helper: fix typo in error message when --signed is not supported
A few files include the same header file directly more than once.
As all these headers protect themselves against repeated inclusion
by the "#ifndef FOO_H / #define FOO_H / ... / #endif" idiom, leave
only the first inclusion and remove the later inclusion as a no-op
clean-up.
Signed-off-by: Дилян Палаузов <git-dpa@aegee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A remote helper is currently only told about the 'check-connectivity',
'cloning', and 'update-shallow' options when it supports the 'fetch'
command, but not when it supports 'import' instead.
This is especially important for the 'cloning' option, because it
means a remote helper that only supports 'import' can't distinguish
between a clone and a pull besides doing some assumptions from the
git directory state.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a remote helper is only told about the progress and verbosity
options for the 'fetch' and 'push' commands. This means a remote helper
that implements 'import' and 'export' can never know the user requested
progress or verbosity (or lack thereof) through the command line.
Telling the remote helper about those options after asking for its
capabilities ensures it can act accordingly for all commands.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical remote helper will return a `list` of refs containing a symbolic
ref HEAD, pointing to, e.g. refs/heads/master. In the case of a clone, all
the refs are being requested through `fetch` or `import`, including the
symbolic ref.
While this works properly, in some cases of a fetch, like `git fetch url`
or `git fetch origin HEAD`, or any fetch command involving a symbolic ref
without also fetching the corresponding ref it points to, the fetch command
fails with:
fatal: bad object 0000000000000000000000000000000000000000
error: <remote> did not send all necessary objects
(in the case the remote helper returned '?' values to the `list` command).
This is because there is only one ref given to fetch(), and it's not
further resolved to something at the end of fetch_with_import().
While this can be somehow handled in the remote helper itself, by adding
a refspec for the symbolic ref, and storing an explicit ref in a private
namespace, and then handling the `import` for that symbolic ref
specifically, very few existing remote helpers are actually doing that.
So, instead of requesting the exact list of wanted refs to remote helpers,
treat symbolic refs differently and request the ref they point to instead.
Then, resolve the symbolic refs values based on the pointed ref.
This assumes there is no more than one level of indirection (a symbolic
ref doesn't point to another symbolic ref).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call child_process_init() instead of zeroing the memory of variables of
type struct child_process by hand before use because the former is both
clearer and shorter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add managed "env" array to child_process to clarify the lifetime
rules.
* rs/run-command-env-array:
use env_array member of struct child_process
run-command: add env_array, an optional argv_array for env
Convert users of struct child_process to using the managed env_array for
specifying environment variables instead of supplying an array on the
stack or bringing their own argv_array. This shortens and simplifies
the code and ensures automatically that the allocated memory is freed
after use.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
The "--signed" option received by "git push" is first passed to the
transport layer, which the native transport directly uses to notice
that a push certificate needs to be sent. When the transport-helper
is involved, however, the option needs to be told to the helper with
set_helper_option(), and the helper needs to take necessary action.
For the smart-HTTP helper, the "necessary action" involves spawning
the "git send-pack" subprocess with the "--signed" option.
Once the above all gets wired in, the smart-HTTP transport now can
use the push certificate mechanism to authenticate its pushes.
Add a test that is modeled after tests for the native transport in
t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test
Apache configuration to pass GNUPGHOME environment variable through.
As PassEnv would trigger warnings for an environment variable that
is not set, export it from test-lib.sh set to a harmless value when
GnuPG is not being used in the tests.
Note that the added test is deliberately loose and does not check
the nonce in this step. This is because the stateless RPC mode is
inevitably flaky and a nonce that comes back in the actual push
processing is one issued by a different process; if the two
interactions with the server crossed a second boundary, the nonces
will not match and such a check will fail. A later patch in the
series will work around this shortcoming.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function for initializing those struct child_process
variables for which the macro CHILD_PROCESS_INIT can't be used.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We detect the "import-marks" capability by looking for that
string, but _without_ a trailing space. Then we skip past it
using strlen("import-marks "), with a space. So if a remote
helper gives us exactly "import-marks", we will read past
the end-of-string by one character.
This is unlikely to be a problem in practice, because such
input is malformed in the first place, and because there is
a good chance that the string has an extra NUL terminator
one character after the original (because it formerly had a
newline in it that we parsed off).
We can fix it by using skip_prefix with "import-marks ",
with the space. The other form appears to be a typo from
a515ebe (transport-helper: implement marks location as
capability, 2011-07-16); "import-marks" has never existed
without an argument, and it should match the "export-marks"
definition above.
Speaking of which, we can also use skip_prefix in a few
other places while we are in the function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow remote-helper/fast-import based transport to rename the refs
while transferring the history.
* fc/remote-helper-refmap:
transport-helper: remove unnecessary strbuf resets
transport-helper: add support to delete branches
fast-export: add support to delete refs
fast-import: add support to delete refs
transport-helper: add support to push symbolic refs
transport-helper: add support for old:new refspec
fast-export: add new --refspec option
fast-export: improve argument parsing
xcalloc() takes two arguments: the number of elements and their size.
transport_helper_init passes the arguments in reverse order, passing the
size of a helper_data*, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of showing a warning and working as before, fail and show
the message and force immediate upgrade from their upstream
repositories when these tools are run, per request from their
primary author.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d508e4a8e2,
reversing changes made to e42552135a.
The author of the original topic says he broke the upcoming 2.0
release with something that relates to "synchronization crash
regression" while refusing to give further specifics, so this would
unfortunately be the safest option for the upcoming release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves a few lines and lets us avoid having to clean up
the memory manually when the command finishes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code and avoids a fixed array size that
we might accidentally overflow. It also prevents a leak
after finish_command is run, by using the argv_array that
run-command manages for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_helper functions dynamically allocates an
argv_array, feeds it to start_command, and then returns. We
then have to later clean up the memory manually after
calling finish_command. We can make this simpler by just
using run-command's internal argv_array, which handles
cleanup for us.
This also prevents a memory leak in the case that
transport_take_over is used, in which case we free the child
in finish_connect, which does not manually free the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For remote-helpers that use 'export' to push.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using fast-export's new --refspec option.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote helper crashes while pushing we should revert back to the
state before the push, however, it's possible that `git fast-export`
already finished its job, and therefore has exported the marks already.
This creates a synchronization problem because from that moment on
`git fast-{import,export}` will have marks that the remote helper is not
aware of and all further commands fail (if those marks are referenced).
The fix is to tell `git fast-export` to export to a temporary file, and
only after the remote helper has finishes successfully, move to the
final destination.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's simpler to store the file names directly, and form the fast-export
arguments only when needed, and re-use the same strbuf with a format.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's cleaner, and will allow us to do something sensible on errors
later.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of exiting directly, make it the duty of the caller to do so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's only used once, we can just call the two functions inside directly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates transport-helper, fast-import and fast-export to allow the
ref mapping and ref deletion in a way similar to the natively
supported transports.
* fc/transport-helper-fixes:
remote-bzr: support the new 'force' option
test-hg.sh: tests are now expected to pass
transport-helper.c: do not overwrite forced bit
transport-helper: check for 'forced update' message
transport-helper: add 'force' to 'export' helpers
transport-helper: don't update refs in dry-run
transport-helper: mismerge fix
If the the transport helper says it was a forced update, then it is
a forced update. It is however possible that an update is forced
without the transport-helper knowing about it, namely because some
higher up code had objections to the update and needed forcing in
order to let it through to the transport helper. In other words, it
does not necessarily mean the update was *not* forced, when the
helper did not say "forced update".
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
Our xwrite wrapper already deals with a few potential hazards, and
are as such more robust. Prefer it instead of write to get the
robustness benefits everywhere.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-and-improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So the remote-helpers can tell us when a forced push was needed.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise they cannot know when to force the push or not (other than
hacks).
Tests-by: Richard Hansen <rhansen@bbn.com>
Documentation-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote helper namespace should not be updated.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9c51558 (transport-helper: trivial code shuffle) moved these
lines above, but 99d9ec0 (Merge branch 'fc/transport-helper-no-refspec')
had a wrong merge conflict and readded them.
Reported-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/mediawiki-dumb-push-fix:
git-remote-mediawiki: no need to update private ref in non-dumb push
git-remote-mediawiki: use no-private-update capability on dumb push
transport-helper: add no-private-update capability
git-remote-mediawiki: add test and check Makefile targets
Allow a safer "rewind of the remote tip" push than blind "--force",
by requiring that the overwritten remote ref to be unchanged since
the new history to replace it was prepared.
The machinery is more or less ready. The "--force" option is again
the big red button to override any safety, thanks to J6t's sanity
(the original round allowed --lockref to defeat --force).
The logic to choose the default implemented here is fragile
(e.g. "git fetch" after seeing a failure will update the
remote-tracking branch and will make the next "push" pass,
defeating the safety pretty easily). It is suitable only for the
simplest workflows, and it may hurt users more than it helps them.
* jc/push-cas:
push: teach --force-with-lease to smart-http transport
send-pack: fix parsing of --force-with-lease option
t5540/5541: smart-http does not support "--force-with-lease"
t5533: test "push --force-with-lease"
push --force-with-lease: tie it all together
push --force-with-lease: implement logic to populate old_sha1_expect[]
remote.c: add command line option parser for "--force-with-lease"
builtin/push.c: use OPT_BOOL, not OPT_BOOLEAN
cache.h: move remote/connect API out of it
Since 664059fb (transport-helper: update remote helper namespace,
2013-04-17), a 'push' operation on a remote helper updates the
private ref by default. This is often a good thing, but it can also
be desirable to disable this update to force the next 'pull' to
re-import the pushed revisions.
Allow remote-helpers to disable the automatic update by introducing a new
capability.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been passing enough information to enable the
compare-and-swap logic down to the transport layer, but the
transport helper was not passing it to smart-http transport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an extension of c6807a4 (clone: open a shortcut for
connectivity check - 2013-05-26) to reduce the cost of connectivity
check at clone time, this time with smart http protocol.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the function attributes extension to catch mistakes in use of
our own variadic functions that use NULL sentinel at the end
(i.e. like execl(3)) and format strings (i.e. like printf(3)).
* jk/gcc-function-attributes:
Add the LAST_ARG_MUST_BE_NULL macro
wt-status: use "format" function attribute for status_printf
use "sentinel" function attribute for variadic lists
add missing "format" function attributes
For most of our functions that take printf-like formats, we
use gcc's __attribute__((format)) to get compiler warnings
when the functions are misused. Let's give a few more
functions the same protection.
In most cases, the annotations do not uncover any actual
bugs; the only code change needed is that we passed a size_t
to transfer_debug, which expected an int. Since we expect
the passed-in value to be a relatively small buffer size
(and cast a similar value to int directly below), we can
just cast away the problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit 81d340d4, we did not print any error message
if a remote transport helper died unexpectedly. If a helper
did not print any error message (e.g., because it crashed),
the user could be left confused. That commit tried to
rectify the situation by printing a note that the helper
exited unexpectedly.
However, this makes a much more common case worse: when a
helper does die with a useful message, we print the extra
"Reading from 'git-remote-foo failed" message. This can also
end up confusing users, as they may not even know what
remote helpers are (e.g., the fact that http support comes
through git-remote-https is purely an implementation detail
that most users do not know or care about).
Since we do not have a good way of knowing whether the
helper printed a useful error, and since the common failure
mode is for it to do so, let's default to remaining quiet.
Debuggers can dig further by setting GIT_TRANSPORT_HELPER_DEBUG.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "export" remote-helper protocol,
(1) a push that tries to update a remote ref whose name is
different from the pushing side does not work yet, and
(2) the helper may not know how to do --dry-run
Detect such problematic cases and disable them for now.
* fc/transport-helper-no-refspec:
transport-helper: check if the dry-run is supported
transport-helper: barf when user tries old:new
Update transport helper to report errors and maintain ref hierarchy
used to keep track of remote helper state better.
* fc/transport-helper-error-reporting:
transport-helper: fix remote helper namespace regression
test: remote-helper: add missing and
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
Certain remote-helpers (the ones with 'export') would try to push
regardless.
Obviously this is not what the user wants.
Also, add a check for the 'dry-run' option, so remote-helpers can
implement it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise with certain remote helpers (the ones that support 'export'),
the users will be pushing to the wrong branch:
git push topic:master
Will push the topic branch, as if the user typed:
git push topic
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 664059f (transport-helper: update remote helper namespace)
updates the namespace when the push succeeds or not; we should do it
only when it succeeded.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.2.3
t5004: avoid using tar for checking emptiness of archive
t5004: ignore pax global header file
mergetools/kdiff3: do not use --auto when diffing
transport-helper: trivial style cleanup
If there's already a remote-helper tracking ref, we can fetch the
SHA-1 to report proper push messages (as opposed to always reporting
[new branch]).
The remote-helper currently can specify the old SHA-1 to avoid this
problem, but there's no point in forcing all remote-helpers to be aware
of git commit ids; they should be able to be agnostic of them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing, the remote namespace is updated correctly
(e.g. refs/origin/master), but not the remote helper's
(e.g. refs/testgit/origin/master), which currently is only
updated while fetching.
Since the remote namespace is used to tell fast-export which commits
to avoid (because they were already imported/exported), it makes
sense to have them in sync so they don't get generated twice. If the
remote helper was implemented properly, they would be ignored, if
not, they probably would end up repeated.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just shuffle the die() part to make it more explicit, and cleanup the
code-style.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the modes that need it. In the future we should probably error out,
instead of providing half-assed support.
The reason we want to do this is because if it's not present, the remote
helper might be updating refs/heads/*, or refs/remotes/origin/*,
directly, and in the process fetch will get confused trying to update
refs that are already updated, or older than what they should be. We
shouldn't be messing with the rest of git.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has never worked, since it's inception the code simply skips all
the refs, essentially telling fast-export to do nothing.
Let's at least tell the user what's going on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The *:* refspec doesn't work, and never has, clarify the code and
documentation to reflect that. This in effect reverts commit 9e7673e
(gitremote-helpers(1): clarify refspec behaviour).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a remote helper using the 'export' protocol to specify that
it supports signed tags, changing the handing from 'warn-strip' to
'verbatim'.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, attempting to push a signed tag to a remote helper which uses
fast-export results in the remote helper failing because the default
fast-export action for signed tags is "abort". This is not helpful for
users because there is no way to pass additional arguments to
fast-export here, either from the remote helper or from the command
line.
In general, the signature will be invalidated by whatever transformation
a remote helper performs on a tag to push it to a repository in a
different format so the correct behaviour is to strip the tag. Doing
this silently may surprise people, so use "warn-strip" to issue a
warning when a signed tag is encountered.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there's already a remote-helper tracking ref, we can fetch the SHA-1
to report proper push messages (as opposed to always reporting
[new branch]).
The remote-helper currently can specify the old SHA-1 to avoid this
problem, but there's no point in forcing all remote-helpers to be aware
of git commit ids; they should be able to be agnostic of them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to read from a remote-helper and get EOF or an
error, we print a message indicating that the helper died.
However, users may not know that a remote helper was in use
(e.g., when using git-over-http), or even what a remote
helper is.
Let's print the name of the helper (e.g., "git-remote-https");
this makes it more obvious what the program is for, and
provides a useful token for reporting bugs or searching for
more information (e.g., in manpages).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a push fails because the remote-helper died (with fast-export),
the user may not see any error message. We do correctly die with a
failed exit code, as we notice that the helper has died while
reading back the ref status from the helper. However, we don't print
any message. This is OK if the helper itself printed a useful error
message, but we cannot count on that; let's let the user know that
the helper failed.
In the long run, it may make more sense to propagate the error back
up to push, so that it can present the usual status table and give a
nicer message. But this is a much simpler fix that can help
immediately.
While we're adding tests, let's also confirm that the remote-helper
dying is also detected when importing refs. We currently do so
robustly when the helper uses the "done" feature (and that is what
we test). We cannot do so reliably when the helper does not use the
"done" feature, but it is not even worth testing; the right solution
is for the helper to start using "done".
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import prints statistics that could be interesting to the
developer of remote helpers.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-import commands 'cat-blob' and 'ls' can be used by
remote-helpers to retrieve information about blobs and trees that
already exist in fast-import's memory. This requires a channel from
fast-import to the remote-helper.
remote-helpers that use these features shall advertise the new
'bidi-import' capability to signal that they require the communication
channel. When forking fast-import in transport-helper.c connect it to
a dup of the remote-helper's stdin-pipe. The additional file
descriptor is passed to fast-import via its command line
(--cat-blob-fd). It follows that git and fast-import are connected to
the remote-helpers's stdin.
Because git can send multiple commands to the remote-helper on it's
stdin, it is required that helpers that advertise 'bidi-import' buffer
all input commands until the batch of 'import' commands is ended by a
newline before sending data to fast-import. This is to prevent mixing
commands and fast-import responses on the helper's stdin.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch below adds a comment to fetch_with_import() explaining the
loop that saves the fetched commit names after 'git fast-import' has
done its work. It avoids some confusion about which refs the
fast-import stream is supposed to use to write its result.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling routines add a newline. Remove
the duplicate ones in error messages.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/smart-http-failure-to-push:
: Mask SIGPIPE on the command channel going to a transport helper
disconnect from remote helpers more gently
Conflicts:
transport-helper.c
When git spawns a remote helper program (like git-remote-http),
the last thing we do before closing the pipe to the child
process is to send a blank line, telling the helper that we
are done issuing commands. However, the helper may already
have exited, in which case the parent git process will
receive SIGPIPE and die.
In particular, this can happen with the remote-curl helper
when it encounters errors during a push. The helper reports
individual errors for each ref back to git-push, and then
exits with a non-zero exit code. Depending on the exact
timing of the write, the parent process may or may not
receive SIGPIPE.
This causes intermittent test failure in t5541.8, and is a
side effect of 5238cbf (remote-curl: Fix push status report
when all branches fail). Before that commit, remote-curl
would not send the final blank line to indicate that the
list of status lines was complete; it would just exit,
closing the pipe. The parent git-push would notice the
closed pipe while reading the status report and exit
immediately itself, propagating the failing exit code. But
post-5238cbf, remote-curl completes the status list before
exiting, git-push actually runs to completion, and then it
tries to cleanly disconnect the helper, leading to the
SIGPIPE race above.
This patch drops all error-checking when sending the final
"we are about to hang up" blank line to helpers. There is
nothing useful for the parent process to do about errors at
that point anyway, and certainly failing to send our "we are
done with commands" line to a helper that has already exited
is not a problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_ref() can (and in test t5800, actually *does*) return NULL.
Don't pass the NULL along to read_ref(). Coincidentally, this mistake
didn't make resolve_ref() blow up, but upcoming changes to
resolve_ref() will make it less forgiving.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remote helpers do not support deleting refs by means of the 'export'
command sincethe fast-import protocol does not support it.
Check explicitly for deleted refs and die early.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the gitdir location is exported as an environment variable
this can be implemented elegantly without requiring any explicit
flushes nor an ad-hoc exchange of values.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the refspec capability could not be listed as
required or their parsing would break.
Most likely the reason the second hunk wasn't caught is because the
series that added 'refspec' as capability, and the one that added
required capabilities were done in parallel.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the helper must somehow guess how many import statements to
read before it starts outputting its fast-export stream. This is
because the remote helper infrastructure runs fast-import only once,
so the helper is forced to output one stream for all import commands
it will receive. The only reason this worked in the past was because
only one ref was imported at a time.
Change the semantics of the import statement such that it matches
that of the push statement. That is, the import statement is followed
by a series of import statements that are terminated by a '\n'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add check_output from python 2.7.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In other words, use fast-export --use-done-feature to add a 'done'
command at the end of streams passed to remote helpers' "import"
commands, and teach the remote helpers implementing "export" to use
the 'done' command in turn when producing their streams.
The trailing \n in the protocol signals the helper that the
connection is about to close, allowing it to do whatever cleanup
neccesary.
Previously, the connection would already be closed by the
time the trailing \n was to be written. Now that the remote-helper
protocol uses the new done command in its fast-import streams, this
is no longer the case and we can safely write the trailing \n.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the status code of all helpers were ignored, allowing
errors that occur to go unnoticed if the error text output by the
helper is not noticed.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update ref status part of push is useful for the export command
as well, factor it out into it's own function.
Also factor out push_update_ref_status to avoid a long loop without
an explicit condition with a non-trivial body.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitdir capability is recognized by git and can be used to tell
the helper where the .git directory is. But it is not mentioned in
the documentation and considered worse than if gitdir was passed
via GIT_DIR environment variable.
Remove support for the gitdir capability and export GIT_DIR instead.
Teach testgit to use env instead of the now-removed gitdir command.
[sr: fixed up documentation]
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to push to a remote helper that has the
"export" capability, we collect all of the refs we want to
push and then feed them to fast-export.
However, the list of refs is actually a list of remote refs,
not local refs. The mapped local refs are included via the
peer_ref pointer. So when we add an argument to our
fast-export command line, we must be sure to use the local
peer_ref name (and if there is no local name, it is because
we are not actually sending that ref, or we may not even
have the ref at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'bytes' is of type size_t which is unsigned thus can't be negative. But
the assigned write() returns ssize_t, and -1 on error.
For testing < 0, 'bytes' needs to be of a signed type.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All files that include this header file use the same four line
incantation:
#ifndef NO_PTHREADS
#include <pthread.h>
#include "thread-utils.h"
#endif
Move the responsibility for that gymnastics to the header file from the
files that include it. This approach makes it easier to later declare new
services that are related to threading in thread-utils.h and have them
available to all the threading code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with pthread support, transport-helper.c needs to include
necessary header files. Also fix a few error messages in remote-ext and
remote-fd programs, and a potential buffer underrun in remote-fd.
In the documentation, clarify how %G and %V are used; the old description
looked as if they take repository/vhost parameters, which was wrong.
Also fix AsciiDoc markup for the page title of remote-fd/remote-ext manpages,
and tweak the way how section headers are shown.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helper function copies bidirectional stream of data between
stdin/stdout and specified file descriptors.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'gitdir' capability is reported by the remote helper if it
requires the location of the .git directory. The location of the .git
directory can then be used by the helper to store status files even
when the current directory is not a git repository (such as is the
case when cloning).
The location of the .git dir is specified as an absolute path.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/transport-verbosity:
transport: update flags to be in running order
fetch and pull: learn --progress
push: learn --progress
transport->progress: use flag authoritatively
clone: support multiple levels of verbosity
push: support multiple levels of verbosity
fetch: refactor verbosity option handling into transport.[ch]
Documentation/git-push: put --quiet before --verbose
Documentation/git-pull: put verbosity options before merge/fetch ones
Documentation/git-clone: mention progress in -v
Conflicts:
transport.h
Set transport->progress in transport.c::transport_set_verbosity() after
checking for the appropriate conditions (eg. --progress, isatty(2)),
and thereafter use it without having to check again.
The rules used are as follows (processing aborts when a rule is
satisfied):
1. Report progress, if force_progress is 1 (ie. --progress).
2. Don't report progress, if verbosity < 0 (ie. -q/--quiet).
3. Report progress if isatty(2) is 1.
This changes progress reporting behaviour such that if both --progress
and --quiet are specified, progress is reported.
In two areas, the logic to determine whether to *not* show progress is
changed to simply use the negation of transport->progress. This changes
behaviour in some ways (see previous paragraph for details).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the flags TRANSPORT_PUSH_QUIET and TRANSPORT_PUSH_VERBOSE; use
transport->verbose instead to determine verbosity for pushing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/exec-error-report:
Improve error message when a transport helper was not found
start_command: detect execvp failures early
run-command: move wait_or_whine earlier
start_command: report child process setup errors to the parent's stderr
Conflicts:
Makefile
* tr/http-push-ref-status:
transport-helper.c::push_refs(): emit "no refs" error message
transport-helper.c::push_refs(): ignore helper-reported status if ref is not to be pushed
transport.c::transport_push(): make ref status affect return value
refactor ref status logic for pushing
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs
t5541-http-push.sh: add tests for non-fast-forward pushes
Conflicts:
transport-helper.c
* tc/clone-v-progress:
clone: use --progress to force progress reporting
clone: set transport->verbose when -v/--verbose is used
git-clone.txt: reword description of progress behaviour
check stderr with isatty() instead of stdout when deciding to show progress
Conflicts:
transport.c
Perviously, the error message was:
git: 'remote-foo' is not a git-command. See 'git --help'.
By not treating the transport helper as a git command, a more suitable
error is reported:
fatal: Unable to find remote helper for 'foo'
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit an error message when remote_refs is not set.
This behaviour is consistent with that of builtin-send-pack.c and
http-push.c.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
