As can easily be seen from grepping in our sources, we had these uses
of "the_repository" in various library code in cases where the
function in question was already getting a "struct repository *"
argument. Let's use that argument instead.
Out of these changes only the changes to "cache-tree.c",
"commit-reach.c", "shallow.c" and "upload-pack.c" would have cleanly
applied before the migration away from the "repo_*()" wrapper macros
in the preceding commits.
The rest aren't new, as we'd previously implicitly refer to
"the_repository", but it's now more obvious that we were doing the
wrong thing all along, and should have used the parameter instead.
The change to change "get_index_format_default(the_repository)" in
"read-cache.c" to use the "r" variable instead should arguably have
been part of [1], or in the subsequent cleanup in [2]. Let's do it
here, as can be seen from the initial code in [3] it's not important
that we use "the_repository" there, but would prefer to always use the
current repository.
This change excludes the "the_repository" use in "upload-pack.c"'s
upload_pack_advertise(), as the in-flight [4] makes that change.
1. ee1f0c242e (read-cache: add index.skipHash config option,
2023-01-06)
2. 6269f8eaad (treewide: always have a valid "index_state.repo"
member, 2023-01-17)
3. 7211b9e753 (repo-settings: consolidate some config settings,
2019-08-13)
4. <Y/hbUsGPVNAxTdmS@coredump.intra.peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preceding commits we changed many calls to macros that were
providing a "the_repository" argument to invoke corresponding repo_*()
function instead. Let's follow-up and adjust references to those in
comments, which coccinelle didn't (and inherently can't) catch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"rerere.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"promisor-remote.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"packfile.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"diff.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There exists no direct way to interrogate git about which paths are
matched by a given set of sparsity rules. It is possible to get this
information from git, but it includes checking out the commit that
contains the paths, applying the sparse checkout patterns and then using
something like 'git ls-files -t' to check if the skip worktree bit is
set. This works in some case, but there are cases where it is awkward or
infeasible to generate a checkout for this purpose.
Exposing the pattern matching of sparse checkout enables more tooling to
be built and avoids a situation where tools that want to reason about
sparse checkouts start containing parallel implementation of the rules.
To accommodate this, add a 'check-rules' subcommand to the
'sparse-checkout' builtin along the lines of the 'git check-ignore' and
'git check-attr' commands. The new command accepts a list of paths on
stdin and outputs just the ones the match the sparse checkout.
To allow for use in a bare repository and to allow for interrogating
about other patterns than the current ones, include a '--rules-file'
option which allows the caller to explicitly pass sparse checkout rules
in the format accepted by 'sparse-checkout set --stdin'.
To allow for reuse of the handling of input patterns for the
'--rules-file' flag, modify 'add_patterns_from_input()' to be able to
read from a 'FILE' instead of just stdin.
To allow for reuse of the logic which decides whether or not rules
should be interpreted as cone-mode patterns, split that part out of
'update_modes()' such that can be called without modifying the config.
An alternative could have been to create a new 'check-sparsity' command.
However, placing it under 'sparse-checkout' allows for a) more easily
re-using the sparse checkout pattern matching and cone/non-code mode
handling, and b) keeps the documentation for the command next to the
experimental warning and the cone-mode discussion.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding a sub-command to 'sparse-checkout' that can be
run in a bare repository, remove the 'NEED_WORK_TREE' flag from its
entry in the 'commands' array of 'git.c'.
To avoid that this changes any behaviour, add calls to
'setup_work_tree()' to all of the 'sparse-checkout' sub-commands and add
tests that verify that 'sparse-checkout <cmd>' still fail with a clear
error message telling the user that the command needs a work tree.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unusual syntax --rebase-merges="" (that is, --rebase-merges with an
empty string argument) has been an undocumented synonym of
--rebase-merges without an argument. Deprecate that syntax to avoid
confusion when a rebase.rebaseMerges config option is introduced, where
rebase.rebaseMerges="" will be equivalent to --no-rebase-merges.
It is not likely that anyone is actually using this syntax, but just in
case, deprecate the empty string argument instead of dropping support
for it immediately.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c3b58472be (pack-redundant: gauge the usage before proposing its
removal, 2020-08-25), we added a big, ugly warning when pack-redundant
is run. The plan there indicated that we would ratchet that up to an
error before finally removing it. Since it has been 2.5 years (and 9
releases) since then, let's continue with the plan.
Note that we did get one bite on the warning, which was somebody asking
about alternatives:
https://lore.kernel.org/git/CAKvOHKAFXQwt4D8yUCCkf_TQL79mYaJ=KAKhtpDNTvHJFuX1NA@mail.gmail.com/
but we didn't undo the ugly warning (and the advice continues to be "use
repack -d" instead).
There was also some discussion around the time of the deprecation that
pack-redundant was invoked by the bitbake tool, and it still seems to do
so now:
https://git.openembedded.org/bitbake
That use should probably just go away in favor of an occasional repack
(which probably even happens via auto-gc after fetch these days).
But since neither of those data points caused us to cancel the
deprecation plan by dropping the warning, it seems like we should
proceed with the next step.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the comment above the function indicates, we do not bother actually
storing commit messages in our anonymization map. But we still take the
message as a parameter, and just ignore it. Let's stop doing that, which
will make -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The anonymization code has a specific generator callback for each type
of data (e.g., one for paths, one for oids, and so on). These all take a
"data" parameter, but none of them use it for anything. Which is not
surprising, as the point is to generate a new name independent of any
input, and each function keeps its own static counter.
We added the extra pointer in d5bf91fde4 (fast-export: add a "data"
callback parameter to anonymize_str(), 2020-06-23) to handle
--anonymize-map parsing, but that turned out to be awkward itself, and
was recently dropped.
So let's get rid of this "data" parameter that nobody is using, both
from the generators and from anonymize_str() which plumbed it through.
This simplifies the code, and makes -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we handle an --anonymize-map option, we parse the orig/anon pair,
and then feed the "orig" string to anonymize_str(), along with a
generator function that duplicates the "anon" string to be cached in the
map.
This works, because anonymize_str() says "ah, there is no mapping yet
for orig; I'll add one from the generator". But there are some
downsides:
1. It's a bit too clever, as it's not obvious what the code is trying
to do or why it works.
2. It requires allowing generator functions to take an extra void
pointer, which is not something any of the normal callers of
anonymize_str() want.
3. It does the wrong thing if the same token is provided twice.
When there are conflicting options, like:
git fast-export --anonymize \
--anonymize-map=foo:one \
--anonymize-map=foo:two
we usually let the second one override the first. But by using
anonymize_str(), which has first-one-wins logic, we do the
opposite.
So instead of relying on anonymize_str(), let's directly add the entry
ourselves. We can tweak the tests to show that we handle overridden
options correctly now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When anonymizing output, there's only one spot where we generate new
entries to add to our hashmap: when anonymize_str() doesn't find an
entry, we use the generate() callback to make one and add it. Let's pull
that into its own function in preparation for another caller.
Note that we'll add one extra feature. In anonymize_str(), we know that
we won't find an existing entry in the hashmap (since it will only try
to add after failing to find one). But other callers won't have the same
behavior, so we should catch this case and free the now-dangling entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take pains to avoid doing a lookup on a hashmap which has not been
initialized with hashmap_init(). That was necessary back when this code
was written. But hashmap_get() became safer in b7879b0ba6 (hashmap:
allow re-use after hashmap_free(), 2020-11-02). Since then it's OK to
call functions on a zero-initialized table; it will just correctly
return NULL, since there is no match.
This simplifies the code a little, and also lets us keep the
initialization line closer to when we add an entry (which is when the
hashmap really does need to be totally initialized). That will help
later refactoring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store anonymized values as pointers to "const char *", since they are
conceptually const to callers who use them. But they are actually
allocated strings whose memory is owned by the struct.
The ownership mismatch hasn't been a big deal since we never free() them
(they are held until the program ends), but let's switch them to "char *"
in preparation for changing that.
Since most code only accesses them via anonymize_str(), it can continue
to narrow them to "const char *" in its return value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" that responds to "git push" requests failed to
clean a stale lockfile when killed in the middle, which has been
corrected.
* ps/receive-pack-unlock-before-die:
receive-pack: fix stale packfile locks when dying
Fix for a "ls-files --format="%(path)" that produced nonsense
output, which was a bug in 2.38.
* aj/ls-files-format-fix:
ls-files: fix "--format" output of relative paths
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user wishes to input a large list of patterns to 'git
for-each-ref' (likely a long list of exact refs) there are frequently
system limits on the number of command-line arguments.
Add a new --stdin option to instead read the patterns from standard
input. Add tests that check that any unrecognized arguments are
considered an error when --stdin is provided. Also, an empty pattern
list is interpreted as the complete ref set.
When reading from stdin, we populate the filter.name_patterns array
dynamically as opposed to pointing to the 'argv' array directly. This is
simple when using a strvec, as it is NULL-terminated in the same way. We
then free the memory directly from the strvec.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtins 'ls-remote', 'pack-objects', 'receive-pack', 'reflog' and
'send-pack' use parse_options(), but their source files don't directly
include 'parse-options.h'. Furthermore, the source files
'diagnose.c', 'list-objects-filter-options.c', 'remote.c' and
'send-pack.c' define option parsing callback functions, while
'revision.c' defines an option parsing helper function, and thus need
access to various fields in 'struct option' and 'struct
parse_opt_ctx_t', but they don't directly include 'parse-options.h'
either. They all can still be built, of course, because they include
one of the header files that does include 'parse-options.h' (though
unnecessarily, see the next commit).
Add those missing includes to these files, as our general rule is that
"a C file must directly include the header files that declare the
functions and the types it uses".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to print updated references during a fetch, the two different
call sites that do this will first call `format_display()` followed by a
call to `fputs()`. This is needlessly roundabout now that we have the
`display_state` structure that encapsulates all of the printing logic
for references.
Move displaying the reference updates into `format_display()` and rename
it to `display_ref_update()` to better match its new purpose, which
finalizes the conversion to make both the formatting and printing logic
of reference updates self-contained. This will make it easier to add new
output formats and printing to a different file descriptor than stderr.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching from a remote, we not only print the actual references
that have changed, but will also print the URL from which we have
fetched them to standard output. The logic to handle this is duplicated
across two different callsites with some non-trivial logic to compute
the anonymized URL. Furthermore, we're using global state to track
whether we have already shown the URL to the user or not.
Refactor the code by moving it into `format_display()`. Like this, we
can convert the global variable into a member of `display_state`. And
second, we can deduplicate the logic to compute the anonymized URL.
This also works as expected when fetching from multiple remotes, for
example via a group of remotes, as we do this by forking a standalone
git-fetch(1) process per remote that is to be fetched.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `format_display()` is used to print a single reference
update to a buffer which will then ultimately be printed by the caller.
This architecture causes us to duplicate some logic across the different
callsites of this function. This makes it hard to follow the code as
some parts of the logic are located in one place, while other parts of
the logic are located in a different place. Furthermore, by having the
logic scattered around it becomes quite hard to implement a new output
format for the reference updates.
We can make the logic a whole lot easier to understand by making the
`format_display()` function self-contained so that it handles formatting
and printing of the references. This will eventually allow us to easily
implement a completely different output format, but also opens the door
to conditionally print to either stdout or stderr depending on the
output format.
As a first step towards that goal we move the formatting directive used
by both callers to print a single reference update into this function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before printing the name of the local references that would be updated
by a fetch we first prettify the reference name. This is done at the
calling side so that `format_display()` never sees the full name of the
local reference. This restricts our ability to introduce new output
formats that might want to print the full reference name.
Right now, all callsites except one are prettifying the reference name
anyway. And the only callsite that doesn't passes `FETCH_HEAD` as the
hardcoded reference name to `format_display()`, which would never be
changed by a call to `prettify_refname()` anyway. So let's refactor the
code to pass in the full local reference name and then prettify it in
the formatting code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-fetch(1) command supports printing references either in "full"
or "compact" format depending on the `fetch.ouput` config key. The
format that is to be used is tracked in a global variable.
De-globalize the variable by moving it into the `display_state`
structure.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to print references in proper columns we need to calculate the
width of the reference column before starting to print the references.
This is done with the help of a global variable `refcol_width`.
Refactor the code to instead use a new structure `display_state` that
contains the computed width and plumb it through the stack as required.
This is only the first step towards de-globalizing the state required to
print references.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to write a log-message only output file
for empty commits.
* jk/format-patch-change-format-for-empty-commits:
format-patch: output header for empty commits
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
"git push" has been taught to allow deletion of refs with one-level
names to help repairing a repository who acquired such a ref by
mistake. In general, we don't encourage use of such a ref, and
creation or update to such a ref is rejected as before.
* zh/push-to-delete-onelevel-ref:
push: allow delete single-level ref
receive-pack: fix funny ref error messsage
"git restore" supports options like "--ours" that are only
meaningful during a conflicted merge, but these options are only
meaningful when updating the working tree files. These options are
marked to be incompatible when both "--staged" and "--worktree" are
in effect.
* ak/restore-both-incompatible-with-conflicts:
restore: fault --staged --worktree with merge opts
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
Instead of forcing each command to choose to honor GPG related
configuration variables, make the subsystem lazily initialize
itself.
* jc/gpg-lazy-init:
drop pure pass-through config callbacks
gpg-interface: lazily initialize and read the configuration
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
Code clean-up to clarify directory traversal API.
* en/dir-api-cleanup:
unpack-trees: add usage notices around df_conflict_entry
unpack-trees: special case read-tree debugging as internal usage
unpack-trees: rewrap a few overlong lines from previous patch
unpack-trees: mark fields only used internally as internal
unpack_trees: start splitting internal fields from public API
sparse-checkout: avoid using internal API of unpack-trees, take 2
sparse-checkout: avoid using internal API of unpack-trees
unpack-trees: clean up some flow control
dir: mark output only fields of dir_struct as such
dir: add a usage note to exclude_per_dir
dir: separate public from internal portion of dir_struct
unpack-trees: heed requests to overwrite ignored files
t2021: fix platform-specific leftover cruft
"git fsck" learned to check the index files in other worktrees,
just like "git gc" honors them as anchoring points.
* jk/fsck-indices-in-worktrees:
fsck: check even zero-entry index files
fsck: mention file path for index errors
fsck: check index files in all worktrees
fsck: factor out index fsck
When git-rebase invokes format-patch, it wants to make sure we use the
normal prefixes, and are not confused by diff.noprefix or similar. When
this was added in 5b220a6876 (Add --src/dst-prefix to git-formt-patch
in git-rebase.sh, 2010-09-09), we only had --src-prefix and --dst-prefix
to do so, which requires re-specifying the prefixes we expect to see.
These days we can say what we want more directly: just use the defaults.
This is a minor cleanup that should have no behavior change, but
hopefully the result expresses more clearly what the code is trying to
accomplish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced with the "--format" option in
ce74de93 (ls-files: introduce "--format" option, 2022-07-23),
where relative paths were computed using the output buffer,
which could lead to random garbage data in the output.
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When accepting a packfile in git-receive-pack(1), we feed that packfile
into git-index-pack(1) to generate the packfile index. As the packfile
would often only contain unreachable objects until the references have
been updated, concurrently running garbage collection might be tempted
to delete the packfile right away and thus cause corruption. To fix
this, we ask git-index-pack(1) to create a `.keep` file before moving
the packfile into place, which is getting deleted again once all of the
reference updates have been processed.
Now in production systems we have observed that those `.keep` files are
sometimes not getting deleted as expected, where the result is that
repositories tend to grow packfiles that are never deleted over time.
This seems to be caused by a race when git-receive-pack(1) is killed
after we have migrated the kept packfile from the quarantine directory
into the main object database. While this race window is typically small
it can be extended for example by installing a `proc-receive` hook.
Fix this race by registering the lockfile as a tempfile so that it will
automatically be removed at exit or when receiving a signal.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems a user would expect this option would work regardless
of whether it's fetching from a single remote, many remotes,
or recursing into submodules.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit dropped support for diff.noprefix in format-patch.
While this will do the right thing in most cases (where sending patches
without a prefix was an accidental side effect of the sender preferring
to see their local patches without prefixes), it left no good option for
a project or workflow where you really do want to send patches without
prefixes. You'd be stuck using "--no-prefix" for every invocation.
So let's add a config option specific to format-patch that enables this
behavior. That gives people who have such a workflow a way to get what
they want, but makes it hard to accidentally trigger it.
A more backwards-compatible way of doing the transition would be to have
format.noprefix default to diff.noprefix when it's not set. But that
doesn't really help the "accidental" problem; people would have to
manually set format.noprefix=false. And it's unlikely that anybody
really wants format.noprefix=true in the first place. I'm adding it here
mostly as an escape hatch, not because anybody has expressed any
interest in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of format-patch respects diff.noprefix, but this usually ends
up being a hassle for people receiving the patch, as they have to
manually specify "-p0" in order to apply it.
I don't think there was any specific intention for it to behave this
way. The noprefix option is handled by git_diff_ui_config(), and
format-patch exists in a gray area between plumbing and porcelain.
People do look at the output, and we'd expect it to colorize things,
respect their choice of algorithm, and so on. But this particular option
creates problems for the receiver (in theory so does diff.mnemonicprefix,
but since we are always formatting commits, the mnemonic prefixes will
always be "a/" and "b/").
So let's disable it. The slight downsides are:
- people who have set diff.noprefix presumably like to see their
patches without prefixes. If they use format-patch to review their
series, they'll see prefixes. On the other hand, it is probably a
good idea for them to look at what will actually get sent out.
We could try to play games here with "is stdout a tty", as we do for
color. But that's not a completely reliable signal, and it's
probably not worth the trouble. If you want to see the patch with
the usual bells and whistles, then you are better off using "git
log" or "git show".
- if a project really does have a workflow that likes prefix-less
patches, and the receiver is prepared to use "-p0", then the sender
now has to manually say "--no-prefix" for each format-patch
invocation. That doesn't seem _too_ terrible given that the receiver
has to manually say "-p0" for each git-am invocation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
static char *fix_filename(const char *prefix, const char *file);
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user can specify a filename to a command from the command line,
either as the value given to a command line option, or a command
line argument. When it is given as a relative filename, in the
user's mind, it is relative to the directory "git" was started from,
but by the time the filename is used, "git" would almost always have
chdir()'ed up to the root level of the working tree.
The given filename, if it is relative, needs to be prefixed with the
path to the current directory, and it typically is done by calling
prefix_filename() helper function. For commands that can also take
"-" to use the standard input or the standard output, however, this
needs to be done with care.
"git bundle create" uses the next word on the command line as the
output filename, and can take "-" to mean "write to the standard
output". It blindly called prefix_filename(), so running it in a
subdirectory did not quite work as expected.
Introduce a new helper, prefix_filename_except_for_dash(), and use
it to help "git bundle create" codepath.
Reported-by: Michael Henry
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For writing, "bundle create -" indicates that the bundle should be
written to stdout. But there's no matching handling of "-" for reading
operations. This is inconsistent, and a little inflexible (though one
can always use "/dev/stdin" on systems that support it).
However, it's easy to change. Once upon a time, the bundle-reading code
required a seekable descriptor, but that was fixed long ago in
e9ee84cf28 (bundle: allowing to read from an unseekable fd,
2011-10-13). So we just need to handle "-" explicitly when opening the
file.
We _could_ do this by handling "-" in read_bundle_header(), which the
reading functions all call already. But that is probably a bad idea.
It's also used by low-level code like the transport functions, and we
may want to be more careful there. We do not know that stdin is even
available to us, and certainly we would not want to get confused by a
configured URL that happens to point to "-".
So instead, let's add a helper to builtin/bundle.c. Since both the
bundle code and some of the callers refer to the bundle by name for
error messages, let's use the string "<stdin>" to make the output a bit
nicer to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 79862b6b77 (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to
79862b6b77, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
ssh some-host git bundle create foo.bundle |
git bundle unbundle
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
https://lore.kernel.org/git/20191110204126.30553-2-robbat2@gentoo.org/
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting an empty commit, it is surprising that a totally empty
file is generated. Set the flag to always print the header, matching
the behaviour of git-log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We discourage the creation/update of single-level refs
because some upper-layer applications only work in specified
reference namespaces, such as "refs/heads/*" or "refs/tags/*",
these single-level refnames may not be recognized. However,
we still hope users can delete them which have been created
by mistake.
Therefore, when updating branches on the server with
"git receive-pack", by checking whether it is a branch deletion
operation, it will determine whether to allow the update of
a single-level refs. This avoids creating/updating such
single-level refs, but allows them to be deleted.
On the client side, "git push" also does not properly fill in
the old-oid of single-level refs, which causes the server-side
"git receive-pack" to think that the ref's old-oid has changed
when deleting single-level refs, this causes the push to be
rejected. So the solution is to fix the client to be able to
delete single-level refs by properly filling old-oid.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user deletes the remote one level branch through
"git push origin -d refs/foo", remote will return an error:
"refusing to create funny ref 'refs/foo' remotely", here we
are not creating "refs/foo" instead wants to delete it, so a
better error description here would be: "refusing to update
funny ref 'refs/foo' remotely".
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option (as documented) for rebase.autoSquash has a capital S,
whereas the command line option has a small case s.
Cf. <20220617100309.3224-1-worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
The credential subsystem learned that a password may have an
explicit expiration.
* mh/credential-password-expiry:
credential: new attribute password_expiry_utc
The 'restore' command already rejects the --merge, --conflict, --ours
and --theirs options when combined with --staged, but accepts them when
--worktree is added as well.
Unfortunately that doesn't appear to do anything useful. The --ours and
--theirs options seem to be ignored when both --staged and --worktree
are given, whereas with --merge or --conflict, the command has the same
effect as if the --staged option wasn't present.
So reject those options with '--staged --worktree' as well, using
opts->accept_ref to distinguish restore from checkout.
Add test for both '--staged' and '--staged --worktree'.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/read-tree.c has some special functionality explicitly designed
for debugging unpack-trees.[ch]. Associated with that is two fields
that no other external caller would or should use. Mark these as
internal to unpack-trees, but allow builtin/read-tree to read or write
them for this special case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2f6b1eb794 ("cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index()", 2023-01-12) mistakenly added some initialization
of a member of unpack_trees_options that was intended to be
internal-only. This initialization should be done within
update_sparsity() instead.
Note that while o->result is mostly meant for unpack_trees() and
update_sparsity() mostly operates without o->result,
check_ok_to_remove() does consult it so we need to ensure it is properly
initialized.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct unpack_trees_options has the following field and comment:
struct pattern_list *pl; /* for internal use */
Despite the internal-use comment, commit e091228e17 ("sparse-checkout:
update working directory in-process", 2019-11-21) starting setting this
field from an external caller. At the time, the only way around that
would have been to modify unpack_trees() to take an extra pattern_list
argument, and there's a lot of callers of that function. However, when
we split update_sparsity() off as a separate function, with
sparse-checkout being the sole caller, the need to update other callers
went away. Fix this API problem by adding a pattern_list argument to
update_sparsity() and stop setting the internal o.pl field directly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fd2d4c135e (gpg-interface: lazily initialize and read the
configuration, 2023-02-09) shrunk a few custom config callbacks so that
they are just one-liners of:
return git_default_config(...);
We can drop them entirely and replace them direct calls of
git_default_config() intead. This makes the code a little shorter and
easier to understand (with the downside being that if they do grow
custom options again later, we'll have to recreate the functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In fb64ca526a (fsck: check index files in all worktrees, 2023-02-24), we
swapped out a call to vanilla repo_read_index() for a series of
read_index_from() calls, one per worktree. The code for the latter was
copied from add_index_objects_to_pending(), which checks for a positive
return value from the index reading function, and we do the same here in
fsck now.
But this is probably the wrong thing. I had interpreted the check as
"don't operate on the index struct if there was an error". But in
reality, if there is an error then the index-reading code will simply
die (which admittedly is not great for fsck, but that is not a new
problem).
The return value here is actually the number of entries read. So it
makes sense for add_index_objects_to_pending() to ignore a zero-entry
index (there is nothing to add). But for fsck, we would still want to
check any extensions, etc (though presumably it is unlikely to have them
in an empty index, I don't think it's impossible).
So we should ignore the return value from read_index_from() entirely.
This matches the behavior before fb64ca526a, when we ignored the return
value from repo_read_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --jobs=0" used to hit a BUG(), which has been corrected
to use the available CPUs.
* ma/fetch-parallel-use-online-cpus:
fetch: choose a sensible default with --jobs=0 again
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to fsck an index operates directly on the_index. Let's move it
into its own function in preparation for handling the index files from
other worktrees.
Since we now have only a single reference to the_index, let's drop
our USE_THE_INDEX_VARIABLE definition and just use the_repository.index
directly. That's a minor cleanup, but also ensures that we didn't miss
any references when moving the code into fsck_index().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our parallel process API takes several callbacks via function pointers
in the run_process_paralell_opts struct. Not every callback needs every
parameter; let's mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_note() requires a callback, but not all callbacks need all of
the parameters. Likewise, init_notes() takes a callback to implement the
"combine" strategy, but the "ignore" variant obviously doesn't look at
its arguments at all. Mark unused parameters as appropriate to silence
compiler warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our graph-traversal functions take callbacks for showing commits and
objects, but not all callbacks need each parameter. Likewise for the
similar traverse_bitmap_commit_list(), which has a different interface
but serves the same purpose. And the include_check mechanism, which
passes along a void pointer which is not always used.
Mark the unused ones to to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signal handlers receive their signal number as a parameter, but many
don't care what it is (because they only handle one signal, or because
their action is the same regardless of the signal). Mark such parameters
to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust several files to be more explicit about their dependency on
replace-objects to accommodate this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions were all defined in a separate ident.c already, so
create ident.h and move the declarations into that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some passwords have an expiry date known at generation. This may be
years away for a personal access token or hours for an OAuth access
token.
When multiple credential helpers are configured, `credential fill` tries
each helper in turn until it has a username and password, returning
early. If Git authentication succeeds, `credential approve`
stores the successful credential in all helpers. If authentication
fails, `credential reject` erases matching credentials in all helpers.
Helpers implement corresponding operations: get, store, erase.
The credential protocol has no expiry attribute, so helpers cannot
store expiry information. Even if a helper returned an improvised
expiry attribute, git credential discards unrecognised attributes
between operations and between helpers.
This is a particular issue when a storage helper and a
credential-generating helper are configured together:
[credential]
helper = storage # eg. cache or osxkeychain
helper = generate # eg. oauth
`credential approve` stores the generated credential in both helpers
without expiry information. Later `credential fill` may return an
expired credential from storage. There is no workaround, no matter how
clever the second helper. The user sees authentication fail (a retry
will succeed).
Introduce a password expiry attribute. In `credential fill`, ignore
expired passwords and continue to query subsequent helpers.
In the example above, `credential fill` ignores the expired password
and a fresh credential is generated. If authentication succeeds,
`credential approve` replaces the expired password in storage.
If authentication fails, the expired credential is erased by
`credential reject`. It is unnecessary but harmless for storage
helpers to self prune expired credentials.
Add support for the new attribute to credential-cache.
Eventually, I hope to see support in other popular storage helpers.
Example usage in a credential-generating helper
https://github.com/hickford/git-credential-oauth/pull/16
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Reviewed-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the run-hooks API to allow feeding data from the standard
input when running the hook script(s).
* ab/hook-api-with-stdin:
hook: support a --to-stdin=<path> option
sequencer: use the new hook API for the simpler "post-rewrite" call
hook API: support passing stdin to hooks, convert am's 'post-rewrite'
run-command: allow stdin for run_processes_parallel
run-command.c: remove dead assignment in while-loop
Leak fixes.
* ab/various-leak-fixes:
push: free_refs() the "local_refs" in set_refspecs()
push: refactor refspec_append_mapped() for subsequent leak-fix
receive-pack: release the linked "struct command *" list
grep API: plug memory leaks by freeing "header_list"
grep.c: refactor free_grep_patterns()
builtin/merge.c: free "&buf" on "Your local changes..." error
builtin/merge.c: use fixed strings, not "strbuf", fix leak
show-branch: free() allocated "head" before return
commit-graph: fix a parse_options_concat() leak
http-backend.c: fix cmd_main() memory leak, refactor reg{exec,free}()
http-backend.c: fix "dir" and "cmd_arg" leaks in cmd_main()
worktree: fix a trivial leak in prune_worktrees()
repack: fix leaks on error with "goto cleanup"
name-rev: don't xstrdup() an already dup'd string
various: add missing clear_pathspec(), fix leaks
clone: use free() instead of UNLEAK()
commit-graph: use free_commit_graph() instead of UNLEAK()
bundle.c: don't leak the "args" in the "struct child_process"
tests: mark tests as passing with SANITIZE=leak
