Now that multi-pack reuse is supported, enable it via the
feature.experimental configuration in addition to the classic
`pack.allowPackReuse`.
This will allow more users to experiment with the new behavior who might
not otherwise be aware of the existing `pack.allowPackReuse`
configuration option.
The enum with values NO_PACK_REUSE, SINGLE_PACK_REUSE, and
MULTI_PACK_REUSE is defined statically in builtin/pack-objects.c's
compilation unit. We could hoist that enum into a scope visible from the
repository_settings struct, and then use that enum value in
pack-objects. Instead, define a single int that indicates what
pack-objects's default value should be to avoid additional unnecessary
code movement.
Though `feature.experimental` implies `pack.allowPackReuse=multi`, this
can still be overridden by explicitly setting the latter configuration
to either "single" or "false". Tests covering all of these cases are
showin t5332.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All conditional "advice" messages show how to turn them off, which
becomes repetitive. Setting advice.* configuration explicitly on
now omits the instruction part.
* rj/advice-disable-how-to-disable:
advice: allow disabling the automatic hint in advise_if_enabled()
The error message given when "git branch -d branch" fails due to
commits unique to the branch has been split into an error and a new
conditional advice message.
* rj/advice-delete-branch-not-fully-merged:
branch: make the advice to force-deleting a conditional one
advice: fix an unexpected leading space
advice: sort the advice related lists
"git fetch" learned to pay attention to "fetch.all" configuration
variable, which pretends as if "--all" was passed from the command
line when no remote parameter was given.
* tb/fetch-all-configuration:
fetch: add new config option fetch.all
Using advise_if_enabled() to display an advice will automatically
include instructions on how to disable the advice, alongside the main
advice:
hint: use --reapply-cherry-picks to include skipped commits
hint: Disable this message with "git config advice.skippedCherryPicks false"
To do so, we provide a knob which can be used to disable the advice.
But also to tell us the opposite: to show the advice.
Let's not include the deactivation instructions for an advice if the
user explicitly sets its visibility.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
Streaming spans of packfile data used to be done only from a
single, primary, pack in a repository with multiple packfiles. It
has been extended to allow reuse from other packfiles, too.
* tb/multi-pack-verbatim-reuse: (26 commits)
t/perf: add performance tests for multi-pack reuse
pack-bitmap: enable reuse from all bitmapped packs
pack-objects: allow setting `pack.allowPackReuse` to "single"
t/test-lib-functions.sh: implement `test_trace2_data` helper
pack-objects: add tracing for various packfile metrics
pack-bitmap: prepare to mark objects from multiple packs for reuse
pack-revindex: implement `midx_pair_to_pack_pos()`
pack-revindex: factor out `midx_key_to_pack_pos()` helper
midx: implement `midx_preferred_pack()`
git-compat-util.h: implement checked size_t to uint32_t conversion
pack-objects: include number of packs reused in output
pack-objects: prepare `write_reused_pack_verbatim()` for multi-pack reuse
pack-objects: prepare `write_reused_pack()` for multi-pack reuse
pack-objects: pass `bitmapped_pack`'s to pack-reuse functions
pack-objects: keep track of `pack_start` for each reuse pack
pack-objects: parameterize pack-reuse routines over a single pack
pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()`
pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature
ewah: implement `bitmap_is_empty()`
pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions
...
The error message we show when the user tries to delete a not fully
merged branch describes the error and gives a hint to the user:
error: the branch 'foo' is not fully merged.
If you are sure you want to delete it, run 'git branch -D foo'.
Let's move the hint part so that it is displayed using the advice
machinery:
error: the branch 'foo' is not fully merged
hint: If you are sure you want to delete it, run 'git branch -D foo'
hint: Disable this message with "git config advice.forceDeleteBranch false"
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's keep the advice related lists sorted to make them more
digestible.
A multi-line comment has also been changed; that produces the unexpected
'insertion != deletion' in this supposedly 'only sort lines' commit.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a boolean configuration option fetch.all which allows to
fetch all available remotes by default. The config option can be
overridden by explicitly specifying a remote or by using --no-all.
The behavior for --all is unchanged and calling git-fetch with --all
and a remote will still result in an error.
Additionally, describe the configuration variable in the config
documentation and implement new tests to cover the expected behavior.
Also add --no-all to the command-line documentation of git-fetch.
Signed-off-by: Tamino Bauknecht <dev@tb6.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 62db5247 (rebase -i: generate the script via
rebase--helper, 2017-07-14), the short hash is given in
rebase-todo. Specifying rebase.instructionFormat does not alter this
behavior, contrary to what the documentation implies.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no 'ref/notes/' hierarchy. '[format] notes = foo' uses notes
that are found in 'refs/notes/foo'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that both the pack-bitmap and pack-objects code are prepared to
handle marking and using objects from multiple bitmapped packs for
verbatim reuse, allow marking objects from all bitmapped packs as
eligible for reuse.
Within the `reuse_partial_packfile_from_bitmap()` function, we no longer
only mark the pack whose first object is at bit position zero for reuse,
and instead mark any pack contained in the MIDX as a reuse candidate.
Provide a handful of test cases in a new script (t5332) exercising
interesting behavior for multi-pack reuse to ensure that we performed
all of the previous steps correctly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e704fc7978 (pack-objects: introduce pack.allowPackReuse, 2019-12-18),
the `pack.allowPackReuse` configuration option was introduced, allowing
users to disable the pack reuse mechanism.
To prepare for debugging multi-pack reuse, allow setting configuration
to "single" in addition to the usual bool-or-int values.
"single" implies the same behavior as "true", "1", "yes", and so on. But
it will complement a new "multi" value (to be introduced in a future
commit). When set to "single", we will only perform pack reuse on a
single pack, regardless of whether or not there are multiple MIDX'd
packs.
This requires no code changes (yet), since we only support single pack
reuse.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To orphan is a verb that denotes the act of getting on an unborn
branch, and a few references to "orphan branch" in our documentation
are misuses of the word. They caused end-user confusion, which was
made even worse because we did not have the term defined in the
glossary document. Add entries for "unborn" branch and "orphan"
operation to the glossary, and adjust existing documentation
accordingly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting the rebase.autoSquash config variable to true implies a couple
of restrictions: it prevents preemptive fast-forwarding and it triggers
conflicts with apply backend options. However, it only actually results
in auto-squashing when combined with the --interactive (or -i) option,
due to code in run_specific_rebase() that disables auto-squashing unless
the REBASE_INTERACTIVE_EXPLICIT flag is set.
Doing autosquashing for rebase.autoSquash without --interactive would be
problematic in terms of backward compatibility, but conversely, there is
no need for the aforementioned restrictions without --interactive.
So drop the options.config_autosquash check from the conditions for
clearing allow_preemptive_ff, as the case where it is combined with
--interactive is already covered by the REBASE_INTERACTIVE_EXPLICIT
flag check above it.
Also drop the "apply options are incompatible with rebase.autoSquash"
error, because it is unreachable if it is restricted to --interactive,
as apply options already cause an error when used with --interactive.
Drop the tests for the error from t3422-rebase-incompatible-options.sh,
which has separate tests for the conflicts of --interactive with apply
options.
When neither --autosquash nor --no-autosquash are given, only set
options.autosquash to true if rebase.autosquash is combined with
--interactive.
Don't initialize options.config_autosquash to -1, as there is no need to
distinguish between rebase.autoSquash being unset or explicitly set to
false.
Finally, amend the rebase.autoSquash documentation to say it only
affects interactive mode.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The attribute subsystem learned to honor `attr.tree` configuration
that specifies which tree to read the .gitattributes files from.
* jc/attr-tree-config:
attr: add attr.tree for setting the treeish to read attributes from
attr: read attributes from HEAD when bare repo
Many typos, ungrammatical sentences and wrong phrasing have been
fixed.
* sn/typo-grammo-phraso-fixes:
t/README: fix multi-prerequisite example
doc/gitk: s/sticked/stuck/
git-jump: admit to passing merge mode args to ls-files
doc/diff-options: improve wording of the log.diffMerges mention
doc: fix some typos, grammar and wording issues
"git repack" learned "--max-cruft-size" to prevent cruft packs from
growing without bounds.
* tb/repack-max-cruft-size:
repack: free existing_cruft array after use
builtin/repack.c: avoid making cruft packs preferred
builtin/repack.c: implement support for `--max-cruft-size`
builtin/repack.c: parse `--max-pack-size` with OPT_MAGNITUDE
t7700: split cruft-related tests to t7704
44451a2 (attr: teach "--attr-source=<tree>" global option to "git",
2023-05-06) provided the ability to pass in a treeish as the attr
source. In the context of serving Git repositories as bare repos like we
do at GitLab however, it would be easier to point --attr-source to HEAD
for all commands by setting it once.
Add a new config attr.tree that allows this.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cruft packs are an alternative mechanism for storing a collection of
unreachable objects whose mtimes are recent enough to avoid being
pruned out of the repository.
When cruft packs were first introduced back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20) and
a7d493833f (builtin/pack-objects.c: --cruft with expiration,
2022-05-20), the recommended workflow consisted of:
- Repacking periodically, either by packing anything loose in the
repository (via `git repack -d`) or producing a geometric sequence
of packs (via `git repack --geometric=<d> -d`).
- Every so often, splitting the repository into two packs, one cruft
to store the unreachable objects, and another non-cruft pack to
store the reachable objects.
Repositories may (out of band with the above) choose periodically to
prune out some unreachable objects which have aged out of the grace
period by generating a pack with `--cruft-expiration=<approxidate>`.
This allowed repositories to maintain relatively few packs on average,
and quarantine unreachable objects together in a cruft pack, avoiding
the pitfalls of holding unreachable objects as loose while they age out
(for more, see some of the details in 3d89a8c118
(Documentation/technical: add cruft-packs.txt, 2022-05-20)).
This all works, but can be costly from an I/O-perspective when
frequently repacking a repository that has many unreachable objects.
This problem is exacerbated when those unreachable objects are rarely
(if every) pruned.
Since there is at most one cruft pack in the above scheme, each time we
update the cruft pack it must be rewritten from scratch. Because much of
the pack is reused, this is a relatively inexpensive operation from a
CPU-perspective, but is very costly in terms of I/O since we end up
rewriting basically the same pack (plus any new unreachable objects that
have entered the repository since the last time a cruft pack was
generated).
At the time, we decided against implementing more robust support for
multiple cruft packs. This patch implements that support which we were
lacking.
Introduce a new option `--max-cruft-size` which allows repositories to
accumulate cruft packs up to a given size, after which point a new
generation of cruft packs can accumulate until it reaches the maximum
size, and so on. To generate a new cruft pack, the process works like
so:
- Sort a list of any existing cruft packs in ascending order of pack
size.
- Starting from the beginning of the list, group cruft packs together
while the accumulated size is smaller than the maximum specified
pack size.
- Combine the objects in these cruft packs together into a new cruft
pack, along with any other unreachable objects which have since
entered the repository.
Once a cruft pack grows beyond the size specified via `--max-cruft-size`
the pack is effectively frozen. This limits the I/O churn up to a
quadratic function of the value specified by the `--max-cruft-size`
option, instead of behaving quadratically in the number of total
unreachable objects.
When pruning unreachable objects, we bypass the new code paths which
combine small cruft packs together, and instead start from scratch,
passing in the appropriate `--max-pack-size` down to `pack-objects`,
putting it in charge of keeping the resulting set of cruft packs sized
correctly.
This may seem like further I/O churn, but in practice it isn't so bad.
We could prune old cruft packs for whom all or most objects are removed,
and then generate a new cruft pack with just the remaining set of
objects. But this additional complexity buys us relatively little,
because most objects end up being pruned anyway, so the I/O churn is
well contained.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit implemented the `gc.repackFilter` config option
to specify a filter that should be used by `git gc` when
performing repacks.
Another previous commit has implemented
`git repack --filter-to=<dir>` to specify the location of the
packfile containing filtered out objects when using a filter.
Let's implement the `gc.repackFilterTo` config option to specify
that location in the config when `gc.repackFilter` is used.
Now when `git gc` will perform a repack with a <dir> configured
through this option and not empty, the repack process will be
passed a corresponding `--filter-to=<dir>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
Users might want to perform such a cleanup regularly at the same time as
they perform other repacks and cleanups, so as part of `git gc`.
Let's allow them to configure a <filter-spec> for that purpose using a
new gc.repackFilter config option.
Now when `git gc` will perform a repack with a <filter-spec> configured
through this option and not empty, the repack process will be passed a
corresponding `--filter=<filter-spec>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
