When GIT_COMPLETION_IGNORE_CASE is set, also allow lowercase completion
text like "head" to match uppercase HEAD and other pseudorefs.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_COMPLETION_IGNORE_CASE is set, --ignore-case will be added to
git for-each-ref calls so that refs can be matched case insensitively,
even when running on case sensitive filesystems.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_PS1_SHOWCONFLICTSTATE is set to "yes", show the word "CONFLICT"
on the command prompt when there are unresolved conflicts.
Example prompt: (main|CONFLICT)
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short upstream state indicator inherits the colour of the last short
state indicator before it (if there is one), and the sparsity state
indicator inherits this colour as well. This behaviour was introduced by
0ec7c23cdc (git-prompt: make upstream state indicator location
consistent, 2022-02-27), while before this change the aforementioned
indicators were white/the default text colour. Some examples to
illustrate this behaviour (assuming all indicators are enabled and
colourization is on):
* If there is something in the stash, both the '$' and the short
upstream state indicator following it will be blue.
* If the local tree has new, untracked files and there is nothing in
the stash, both the '%' and the short upstream state indicator
will be red.
* If all local changes are added to the index and the stash is empty,
both the '+' and the short upstream state indicator following it will
be green.
* If the local tree is clean and there is nothing in the stash, the
short upstream state indicator will be white/${default text colour}.
This appears to be an unintended side-effect of the change, and makes
little sense semantically (e.g. why is it bad to be in sync with
upstream when you have uncommitted local changes?). The cause of the
change in colourization is that previously, the short upstream state
indicator appeared immediately after the rebase/revert/bisect/merge
state indicator (note the position of $p in $gitstring):
local f="$h$w$i$s$u"
local gitstring="$c$b${f:+$z$f}${sparse}$r$p"
Said indicator is prepended with the clear colour code, and the short
upstream state indicator is thus also uncoloured. Now, the short
upstream state indicator follows the sequence of colourized indicators,
without any clearing of colour (again note the position of $p, now in
$f):
local f="$h$w$i$s$u$p"
local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}"
If the user is in a sparse checkout, the sparsity state indicator
follows a similar pattern to the short upstream state indicator.
However, clearing colour of the colourized indicators changes how the
sparsity state indicator is colourized, as it currently inherits (and
before the change referenced also inherited) the colour of the last
short state indicator before it. Reading the commit message of the
change that introduced the sparsity state indicator, afda36dbf3
(git-prompt: include sparsity state as well, 2020-06-21), it appears
this colourization also was unintended, so clearing the colour for said
indicator further increases consistency.
Make the colourization of these state indicators consistent by making
all colourized indicators clear their own colour. Make colouring of $c
dependent on it not being empty, as it is no longer being used to colour
the branch name. Move clearing of $b's prefix to before colourization so
it gets cleared properly when colour codes are inserted into it. These
changes make changing the layout of the prompt less prone to unintended
colour changes in the future.
Change coloured Bash prompt tests to reflect the colourization changes:
* Move the colour codes to wrap the expected content of the expanded
$__git_ps1_branch_name in all tests.
* Insert a clear-colour code after the symbol for the first indicator
in "prompt - bash color pc mode - dirty status indicator - dirty
index and worktree", to reflect that all indicators should clear
their own colour.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweaks in the command line prompt (in contrib/) code around its
GIT_PS1_SHOWUPSTREAM feature.
* jd/prompt-upstream-mark:
git-prompt: put upstream comments together
git-prompt: make long upstream state indicator consistent
git-prompt: make upstream state indicator location consistent
git-prompt: rename `upstream` to `upstream_type`
Commit 6d158cba28 (bash completion: Support "divergence from upstream"
messages in __git_ps1, 2010-06-17) introduced support for indicating
divergence from upstream in the PS1 prompt. The comments at the top of
git-prompt.sh that were introduced with that commit are several
paragraphs long. Over the years, other comments have been inserted in
between the paragraphs relating to divergence from upstream.
This commit puts the comments relating to divergence from upstream back
together.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a pipe as a separator before long upstream state indicator. This is
consistent with long state indicators for sparse and in-progress
operations (e.g. merge).
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are long state indicators, they appear after short
state indicators if there are any, or after the branch name if there are
no short state indicators. Each long state indicator begins with a pipe
(`|`) as a separator.
Before/after examples with long upstream state indicator:
| Before | After |
| ------------------------------- | ------------------------------- |
| (main u=) | (main|u=) |
| (main u= origin/main) | (main|u= origin/main) |
| (main u+1) | (main|u+1) |
| (main u+1 origin/main) | (main|u+1 origin/main) |
| (main % u=) | (main %|u=) |
| (main % u= origin/main) | (main %|u= origin/main) |
| (main % u+1) | (main %|u+1) |
| (main % u+1 origin/main) | (main %|u+1 origin/main) |
| (main|SPARSE u=) | (main|SPARSE|u=) |
| (main|SPARSE u= origin/main) | (main|SPARSE|u= origin/main) |
| (main|SPARSE u+1) | (main|SPARSE|u+1) |
| (main|SPARSE u+1 origin/main) | (main|SPARSE|u+1 origin/main) |
| (main %|SPARSE u=) | (main %|SPARSE|u=) |
| (main %|SPARSE u= origin/main) | (main %|SPARSE|u= origin/main) |
| (main %|SPARSE u+1) | (main %|SPARSE|u+1) |
| (main %|SPARSE u+1 origin/main) | (main %|SPARSE|u+1 origin/main) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make upstream state indicator location more consistent with similar
state indicators (e.g. sparse). Group the short upstream state indicator
(`=`, `<`, `>`, or `<>`) with other short state indicators immediately
after the branch name. Previously short and long upstream state
indicators appeared after all other state indicators.
Use a separator (`SP` or `GIT_PS1_STATESEPARATOR`) between branch name
and short upstream state indicator. Previously the short upstream state
indicator would sometimes appear directly adjacent to the branch name
instead of being separated.
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are short state indicators, they appear together
after the branch name and separated from it by `SP` or
`GIT_PS1_STATESEPARATOR`.
Before/after examples with short upstream state indicator:
| Before | After |
| ---------------- | ---------------- |
| (main=) | (main =) |
| (main|SPARSE=) | (main =|SPARSE) |
| (main %|SPARSE=) | (main %=|SPARSE) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `__git_ps1_show_upstream` rename the variable `upstream` to
`upstream_type`. This allows `__git_ps1_show_upstream` to reference a
variable named `upstream` that is declared `local` in `__git_ps1`, which
calls `__git_ps1_show_upstream`.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no --args are present after 'git restore', it assumes that you
want to tab-complete one of the files with unstaged uncommitted
changes.
If a file has been staged, we don't want to list it, as restoring those
requires a slightly more complex `git restore --staged`, so we only list
those files that are --modified. While --committable also looks like
a good candidate, that includes changes that have been staged.
Signed-off-by: David Cantrell <david@cantrell.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_COMPLETION_SHOW_ALL_COMMANDS=1 configuration setting to go
with the existing GIT_COMPLETION_SHOW_ALL=1 added in
c099f579b9 (completion: add GIT_COMPLETION_SHOW_ALL env var,
2020-08-19).
This will include plumbing commands such as "cat-file" in "git <TAB>"
and "git c<TAB>" completion. Without/with this I have 134 and 243
completion with git <TAB>, respectively.
It was already possible to do this by tweaking
GIT_TESTING_PORCELAIN_COMMAND_LIST= from the outside, that testing
variable was added in 84a9713106 (completion: let git provide the
completable command list, 2018-05-20). Doing this before loading
git-completion.bash worked:
export GIT_TESTING_PORCELAIN_COMMAND_LIST="$(git --list-cmds=builtins,main,list-mainporcelain,others,nohelpers,alias,list-complete,config)"
But such testing variables are not meant to be used from the outside,
and we make no guarantees that those internal won't change. So let's
expose this as a dedicated configuration knob.
It would be better to teach --list-cmds=* a new category which would
include all of these groups, but that's a larger change that we can
leave for some other time.
1. https://lore.kernel.org/git/CAGP6POJ9gwp+t-eP3TPkivBLLbNb2+qj=61Mehcj=1BgrVOSLA@mail.gmail.com/
Reported-by: Hongyi Zhao <hongyi.zhao@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
The completion script (in contrib/) learns that the "--date"
option of commands from the "git log" family takes "human" and
"auto" as valid values.
* yn/complete-date-format-options:
completion: add human and auto: date format
"zdiff3" is identical to ordinary diff3 except that it allows compaction
of common lines on the two sides of history at the beginning or end of
the conflict hunk. For example, the following diff3 conflict:
1
2
3
4
<<<<<<
A
B
C
D
E
||||||
5
6
======
A
X
C
Y
E
>>>>>>
7
8
9
has common lines 'A', 'C', and 'E' on the two sides. With zdiff3, one
would instead get the following conflict:
1
2
3
4
A
<<<<<<
B
C
D
||||||
5
6
======
X
C
Y
>>>>>>
E
7
8
9
Note that the common lines, 'A', and 'E' were moved outside the
conflict. Unlike with the two-way conflicts from the 'merge'
conflictStyle, the zdiff3 conflict is NOT split into multiple conflict
regions to allow the common 'C' lines to be shown outside a conflict,
because zdiff3 shows the base version too and the base version cannot be
reasonably split.
Note also that the removing of lines common to the two sides might make
the remaining text inside the conflict region match the base text inside
the conflict region (for example, if the diff3 conflict had '5 6 E' on
the right side of the conflict, then the common line 'E' would be moved
outside and both the base and right side's remaining conflict text would
be the lines '5' and '6'). This has the potential to surprise users and
make them think there should not have been a conflict, but there
definitely was a conflict and it should remain.
Based-on-patch-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Co-authored-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line complation for "git send-email" options have been
tweaked to make it easier to keep it in sync with the command itself.
* tp/send-email-completion:
send-email docs: add format-patch options
send-email: programmatically generate bash completions
human was introduced in acdd37769d
auto:* was introduced in 2fd7c22992
Those formats were missing when other values were added to completion
at 5a59a2301f
Signed-off-by: Yoichi Nakayama <yoichi.nakayama@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the basic `[`/`test` command, the string equality operator is a
single `=`. The `==` operator is only available in `[[`, which is a
bash-ism also supported by zsh.
This mix-up was causing the following completion error in zsh:
> __git_ls_files_helper:7: = not found
(That message refers to the extraneous symbol in `==` ← `=`).
This updates that comparison to use a single `=` inside the
basic `[ … ]` test conditional.
Although this fix is inconsistent with the other comparisons in this
file, which use `[[ … == … ]]`, and the two expressions are functionally
identical in this context, that approach was rejected due to a
preference for `[`.
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email --git-completion-helper" only prints "format-patch"
flags. Make it print "send-email" flags as well, extracting them
programmatically from its three existing "GetOptions".
Introduce a "uniq" subroutine, otherwise --cc-cover, --to-cover and
other flags would show up twice. In addition, deduplicate flags common
to both "send-email" and "format-patch", like --from.
Remove extraneous flags: --h and --git-completion-helper.
Add trailing "=" to options that expect an argument, inline with
the format-patch implementation.
Add a completion test for "send-email --validate", a send-email flag.
Signed-off-by: Thiago Perrotta <tbperrotta@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
Update to the command line completion (in contrib/) for tcsh.
* ti/tcsh-completion-regression-fix:
completion: tcsh: Fix regression by drop of wrapper functions
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
The "help" builtin has been able to emit configuration variables since
e17ca92637 (completion: drop the hard coded list of config vars,
2018-05-26), but it hasn't produced exactly the format the completion
script wanted. Let's do that.
We got partway there in 2675ea1cc0 (completion: use 'sort -u' to
deduplicate config variable names, 2019-08-13) and
d9438873c4 (completion: deduplicate configuration sections,
2019-08-13), but after both we still needed some sorting,
de-duplicating and awk post-processing of the list.
We can instead simply do the relevant parsing ourselves (we were doing
most of it already), and call string_list_remove_duplicates() after
already sorting the list, so the caller doesn't need to invoke "sort
-u". The "--config-for-completion" output is the same as before after
being passed through "sort -u".
Then add a new "--config-sections-for-completion" option. Under that
output we'll emit config sections like "alias" (instead of "alias." in
the --config-for-completion output).
We need to be careful to leave the "--config-for-completion" option
compatible with users git, but are still running a shell with an older
git-completion.bash. If we e.g. changed the option name they'd see
messages about git-completion.bash being unable to find the
"--config-for-completion" option.
Such backwards compatibility isn't something we should bend over
backwards for, it's only helping users who:
* Upgrade git
* Are in an old shell
* The git-completion.bash in that shell hasn't cached the old
"--config-for-completion" output already.
But since it's easy in this case to retain compatibility, let's do it,
the older versions of git-completion.bash won't care that the input
they get doesn't change after a "sort -u".
While we're at it let's make "--config-for-completion" die if there's
anything left over in "argc", and do the same in the new
"--config-sections-for-completion" option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for `git-rebase--preserve-merges.sh` entering its after
life, we remove this (deprecated) option that would still rely on it.
To help users transition who still did not receive the memo about the
deprecation, we offer a helpful error message instead of throwing our
hands in the air and saying that we don't know that option, never heard
of it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the command line completion (in contrib/) for tcsh.
* ti/tcsh-completion-regression-fix:
completion: tcsh: Fix regression by drop of wrapper functions
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
The cleanup of old compat wrappers in bash completion caused a
regression on tcsh completion that still uses them.
Let's update the tcsh call site as well for addressing it.
Fixes: 441ecdab37 ("completion: bash: remove old compat wrappers")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp automatically adds a suffix, but __gitcomp_nl and others
don't, we need to specify a space by default.
Can be tested with:
git config branch.autoSetupMe<tab>
This fix only works for versions of bash greater than 4.0, before that
"local sfx" creates an empty string, therefore the unset expansion
doesn't work. The same happens in zsh.
Therefore we don't add the test for that for now.
The correct fix for all shells requires semantic changes in __gitcomp,
but that can be done later.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise options of commands like 'for-each-ref' are not completed.
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we are completely ignoring the --cur argument.
The issue can be tested with:
git clone --config=branch.<tab>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to completion script (in contrib/) broke those who
use the __git_complete helper to define completion to their custom
command.
* fw/complete-cmd-idx-fix:
completion: bash: fix late declaration of __git_cmd_idx
The command line completion (in contrib/) learned that "git diff"
takes the "--anchored" option.
* tb/complete-diff-anchored:
completion: add --anchored to diff's options
A recent update to contrib/completion/git-completion.bash causes bash to fail
auto complete custom commands that are wrapped with __git_func_wrap. Declaring
__git_cmd_idx=0 inside __git_func_wrap resolves the issue.
Signed-off-by: Fabian Wermelinger <fabianw@mavt.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This flag was introduced in 2477ab2e (diff: support anchoring line(s),
2017-11-27) but back then, the bash completion script did not learn
about the new flag. Add it.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portability fix for command line completion script (in contrib/).
* si/zsh-complete-comment-fix:
work around zsh comment in __git_complete_worktree_paths
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
The command line completion (in contrib/) for "git stash" has been
updated.
* dl/complete-stash:
git-completion.bash: use __gitcomp_builtin() in _git_stash()
git-completion.bash: extract from else in _git_stash()
git-completion.bash: pass $__git_subcommand_idx from __git_main()
[PATCH]: contrib/completion/git-completion.bash, there is a construct
where comment lines are placed between the command that is on
the upstream of a pipe and the command that is on the downstream
of a pipe in __git_complete_worktree_paths function.
Unfortunately, this script is also used by Zsh completion, but
Zsh mishandles this construct when "interactive_comments" option is not
set (by default it is off on macOS), resulting in a breakage:
$ git worktree remove [TAB]
$ git worktree remove __git_complete_worktree_paths:7: command not found: #
Move the comment, even though it explains what happens on the
downstream of the pipe and logically belongs where it is right
now, before the entire pipeline, to work around this problem.
Signed-off-by: Sardorbek Imomaliev <sardorbek.imomaliev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
