"git archive --list blah" should notice an extra command line
parameter that goes unused. Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive" run from a subdirectory mishandled attributes and
paths outside the current directory.
* rs/archive-from-subdirectory-fixes:
archive: improve support for running in subdirectory
fd2da4b1ea (archive: add --mtime, 2023-02-18) added a helper function
for checking the file modification time of an extracted entry. Use it
for the older mtime test as well to shorten the code and piggyback on
the archive extraction done to validate file contents.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git archive is started in a subdirectory, it archives its
corresponding tree and its child objects, only. That is intended. It
does that by effectively cd'ing into that tree and setting "prefix" to
the empty string.
This has unfortunate consequences, though: Attributes are anchored at
the root of the repository and git archive still applies them to
subtrees, causing mismatches. And when checking pathspecs it cannot
tell the difference between one that doesn't match anthing or one that
matches some actual blob outside of the subdirectory, leading to a
confusing error message.
Fix that by keeping the "prefix" value and passing it to pathspec and
attribute functions, and shortening it using relative_path() for paths
written to the archive and (if --verbose is given) to stdout.
Still reject attempts to archive files outside the current directory,
but print a more specific error in that case. Recognizing it requires a
full traversal of the subtree for each pathspec, however. Allowing them
would be easier, but archive entry paths starting with "../" can be
problematic to extract -- e.g. bsdtar skips them by default.
Reported-by: Cristian Le <cristian.le@mpsd.mpg.de>
Reported-by: Matthias Görgens <matthias.goergens@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to specify the modification time of archive entries. The
new option --mtime uses approxidate() to parse a time specification and
overrides the default of using the current time for trees and the commit
time for tags and commits. It can be used to create a reproducible
archive for a tree, or to use a specific mtime without creating a commit
with GIT_COMMITTER_DATE set.
This implementation doesn't support the negated form of the new option,
i.e. --no-mtime is not accepted. It is not possible to have no mtime at
all. We could use the Unix epoch or revert to the default behavior, but
since negation is not necessary for the intended use it's left undecided
for now.
Requested-by: Raul E Rangel <rrangel@chromium.org>
Suggested-by: demerphq <demerphq@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To match present day coding guiding codelines let's:
- use <<-EOF, so we can indent all lines to the
the same level for this test
- use <<\EOF to notify the reader that no interpolation
is expected in the body
Signed-off-by: Kostya Farber <kostya.farber@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A missing tar filter is reported by start_command() using error(), but
also by its caller, write_tar_filter_archive(), using die():
$ git -c tar.invalid.command=foo archive --format=invalid HEAD
error: cannot run foo: No such file or directory
fatal: unable to start 'foo' filter: No such file or directory
The second message contains all relevant information and even says that
the failed command was intended to be used as a filter. Silence the
first one because it's redundant.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* ab/test-without-templates:
tests: don't assume a .git/info for .git/info/sparse-checkout
tests: don't assume a .git/info for .git/info/exclude
tests: don't assume a .git/info for .git/info/refs
tests: don't assume a .git/info for .git/info/attributes
tests: don't assume a .git/info for .git/info/grafts
tests: don't depend on template-created .git/branches
t0008: don't rely on default ".git/info/exclude"
Drop the dependency on gzip(1) and use our internal implementation to
create tar.gz and tgz files.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses zlib for its own object store, but calls gzip when creating tgz
archives. Add an option to perform the gzip compression for the latter
using zlib, without depending on the external gzip binary.
Plug it in by making write_block a function pointer and switching to a
compressing variant if the filter command has the magic value "git
archive gzip". Does that indirection slow down tar creation? Not
really, at least not in this test:
$ hyperfine -w3 -L rev HEAD,origin/main -p 'git checkout {rev} && make' \
'./git -C ../linux archive --format=tar HEAD # {rev}'
Benchmark #1: ./git -C ../linux archive --format=tar HEAD # HEAD
Time (mean ± σ): 4.044 s ± 0.007 s [User: 3.901 s, System: 0.137 s]
Range (min … max): 4.038 s … 4.059 s 10 runs
Benchmark #2: ./git -C ../linux archive --format=tar HEAD # origin/main
Time (mean ± σ): 4.047 s ± 0.009 s [User: 3.903 s, System: 0.138 s]
Range (min … max): 4.038 s … 4.066 s 10 runs
How does tgz creation perform?
$ hyperfine -w3 -L command 'gzip -cn','git archive gzip' \
'./git -c tar.tgz.command="{command}" -C ../linux archive --format=tgz HEAD'
Benchmark #1: ./git -c tar.tgz.command="gzip -cn" -C ../linux archive --format=tgz HEAD
Time (mean ± σ): 20.404 s ± 0.006 s [User: 23.943 s, System: 0.401 s]
Range (min … max): 20.395 s … 20.414 s 10 runs
Benchmark #2: ./git -c tar.tgz.command="git archive gzip" -C ../linux archive --format=tgz HEAD
Time (mean ± σ): 23.807 s ± 0.023 s [User: 23.655 s, System: 0.145 s]
Range (min … max): 23.782 s … 23.857 s 10 runs
Summary
'./git -c tar.tgz.command="gzip -cn" -C ../linux archive --format=tgz HEAD' ran
1.17 ± 0.00 times faster than './git -c tar.tgz.command="git archive gzip" -C ../linux archive --format=tgz HEAD'
So the internal implementation takes 17% longer on the Linux repo, but
uses 2% less CPU time. That's because the external gzip can run in
parallel on its own processor, while the internal one works sequentially
and avoids the inter-process communication overhead.
What are the benefits? Only an internal sequential implementation can
offer this eco mode, and it allows avoiding the gzip(1) requirement.
This implementation uses the helper functions from our zlib.c instead of
the convenient gz* functions from zlib, because the latter doesn't give
the control over the generated gzip header that the next patch requires.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those tests that assumed that a .git/info directory would be
created for them when writing .git/info/attributes to explicitly
create the directory by setting "TEST_CREATE_REPO_NO_TEMPLATE=1"
before sourcing test-lib.sh, and using the "--template=" argument to
"git clone".
The change here in here in t7814-grep-recurse-submodules.sh would
continue "succeeding" with only the "TEST_CREATE_REPO_NO_TEMPLATE=1"
part of this change. That's because those tests use
"test_expect_failure", so they'd "pass" without this change, as
"test_expect_failure" by design isn't discerning about what failure
conditions it'll accept.
But as we're fixing these sorts of issues across the test suite let's
fix this one too. This issue was spotted with a local merge with
another topic of mine[1], which introduces a stricter alternative to
"test_expect_failure".
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220318T002951Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both fill_commit_graph_info() and fill_commit_in_graph() parse
information present in commit data chunk. Let's simplify the
implementation by calling fill_commit_graph_info() within
fill_commit_in_graph().
fill_commit_graph_info() used to not load committer data from commit data
chunk. However, with the upcoming switch to using corrected committer
date as generation number v2, we will have to load committer date to
compute generation number value anyway.
e51217e15 (t5000: test tar files that overflow ustar headers,
30-06-2016) introduced a test 'generate tar with future mtime' that
creates a commit with committer date of (2^36 + 1) seconds since
EPOCH. The CDAT chunk provides 34-bits for storing committer date, thus
committer time overflows into generation number (within CDAT chunk) and
has undefined behavior.
The test used to pass as fill_commit_graph_info() would not set struct
member `date` of struct commit and load committer date from the object
database, generating a tar file with the expected mtime.
However, with corrected commit date, we will load the committer date
from CDAT chunk (truncated to lower 34-bits to populate the generation
number. Thus, Git sets date and generates tar file with the truncated
mtime.
The ustar format (the header format used by most modern tar programs)
only has room for 11 (or 12, depending on some implementations) octal
digits for the size and mtime of each file.
As the CDAT chunk is overflow by 12-octal digits but not 11-octal
digits, we split the existing tests to test both implementations
separately and add a new explicit test for 11-digit implementation.
To test the 11-octal digit implementation, we create a future commit
with committer date of 2^34 - 1, which overflows 11-octal digits without
overflowing 34-bits of the Commit Date chunks.
To test the 12-octal digit implementation, the smallest committer date
possible is 2^36 + 1, which overflows the CDAT chunk and thus
commit-graph must be disabled for the test.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to append non-tracked files. This simplifies the generation
of source packages with a few extra files, e.g. containing version
information. They get the same access times and user information as
tracked files.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test uses a stub of a very large (64 GB) object to test our
generation of tar archives. In doing so, it uses the object ID of the
object so it can insert it into the database properly. Look up these
values using test_oid. Restructure the test slightly to use
test_oid_in_path.
Since we care about the object, not how it is named in a particular hash
algorithm, rename it to "huge-object", which is shorter and more
descriptive.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize archivers as soon as possible when running git-archive.
Various non-obvious behavior depends on having the archivers
initialized, such as determining the desired archival format from the
provided filename.
Since 08716b3c11 ("archive: refactor file extension format-guessing",
2011-06-21), archive_format_from_filename() has used the registered
archivers to match filenames (provided via --output) to archival
formats. However, when git-archive is executed with --remote, format
detection happens before the archivers have been registered. This causes
archives from remotes to always be generated as TAR files, regardless of
the actual filename (unless an explicit --format is provided).
This patch fixes that behavior; archival format is determined properly
from the output filename, even when --remote is used.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compared to 'test-chmtime -v +0 file' which prints the mtime and
and the file name, 'test-chmtime --get file' displays only the mtime.
If it is used in combination with (+|=|=+|=-|-)seconds, it changes
and prints the new value.
test-chmtime -v +0 file | sed 's/[^0-9].*$//'
is now equivalent to:
test-chmtime --get file
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned long, which is
ill-defined, as there is no guarantee about the number of bits that
data type has.
In preparation of switching to another data type that is large enough
to hold "far in the future" dates, we need to prepare the t0006-date.sh
script for the case where we *still* cannot format those dates if the
system library uses 32-bit time_t.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough to
capture dates that are "absurdly far in the future".
It is perfectly valid by the C standard, of course, for the `long` data
type to refer to 32-bit integers. That is why the `time_t` data type
exists: so that it can be 64-bit even if `long` is 32-bit. Git's source
code simply uses an incorrect data type for timestamps, is all.
The earlier quick fix 6b9c38e14c (t0006: skip "far in the future" test
when unsigned long is not long enough, 2016-07-11) papered over this
issue simply by skipping the respective test cases on platforms where
they would fail due to the data type in use.
This quick fix, however, tests for *long* to be 64-bit or not. What we
need, though, is a test that says whether *whatever data type we use for
timestamps* is 64-bit or not.
The same quick fix was used to handle the similar problem where Git's
source code uses `unsigned long` to represent size, instead of `size_t`,
conflating the two issues.
So let's just add another prerequisite to test specifically whether
timestamps are represented by a 64-bit data type or not. Later, after we
switch to a larger data type, we can flip that prerequisite to test
`time_t` instead of `long`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function abstracts the idea of running a command
outside of any repository (which is slightly awkward to do
because even if you make a non-repo directory, git may keep
walking up outside of the trash directory). There are
several scripts that use the same technique, so let's make
the function available for everyone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git archive" however didn't do the
repository discovery and instead relied on the old behaviour.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables are honoured.
[jc: stole tests from peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we are not yet moving everything to size_t but still using ulong
internally when talking about the size of object, platforms with
32-bit long will not be able to produce tar archive with 4GB+ file,
and cannot grok 077777777777UL as a constant. Disable the extended
header feature and do not test it on them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ustar format represents timestamps as seconds since the
epoch, but only has room to store 11 octal digits. To
express anything larger, we need to use an extended header.
This is exactly the same case we fixed for the size field in
the previous commit, and the solution here follows the same
pattern.
This is even mentioned as an issue in f2f0267 (archive-tar:
use xsnprintf for trivial formatting, 2015-09-24), but since
it only affected things far in the future, it wasn't deemed
worth dealing with. But note that my calculations claiming
thousands of years were off there; because our xsnprintf
produces a NUL byte, we only have until the year 2242 to fix
this.
Given that this is just around the corner (geologically
speaking, anyway), and because it's easy to fix, let's just
make it work. Unlike the previous fix for "size", where we
had to write an individual extended header for each file, we
can write one global header (since we have only one mtime
for the whole archive).
There's a slight bit of trickiness there. We may already be
writing a global header with a "comment" field for the
commit sha1. So we need to write our new field into the same
header. To do this, we push the decision of whether to write
such a header down into write_global_extended_header(),
which will now assemble the header as it sees fit, and will
return early if we have nothing to write (in practice, we'll
only have a large mtime if it comes from a commit, but this
makes it also work if you set your system clock ahead such
that time() returns a huge value).
Note that we don't (and never did) handle negative
timestamps (i.e., before 1970). This would probably not be
too hard to support in the same way, but since git does not
support negative timestamps at all, I didn't bother here.
After writing the extended header, we munge the timestamp in
the ustar headers to the maximum-allowable size. This is
wrong, but it's the least-wrong thing we can provide to a
tar implementation that doesn't understand pax headers (it's
also what GNU tar does).
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ustar format has a fixed-length field for the size of
each file entry which is supposed to contain up to 11 bytes
of octal-formatted data plus a NUL or space terminator.
These means that the largest size we can represent is
077777777777, or 1 byte short of 8GB. The correct solution
for a larger file, according to POSIX.1-2001, is to add an
extended pax header, similar to how we handle long
filenames. This patch does that, and writes zero for the
size field in the ustar header (the last bit is not
mentioned by POSIX, but it matches how GNU tar behaves with
--format=pax).
This should be a strict improvement over the current
behavior, which is to die in xsnprintf with a "BUG".
However, there's some interesting history here.
Prior to f2f0267 (archive-tar: use xsnprintf for trivial
formatting, 2015-09-24), we silently overflowed the "size"
field. The extra bytes ended up in the "mtime" field of the
header, which was then immediately written itself,
overwriting our extra bytes. What that means depends on how
many bytes we wrote.
If the size was 64GB or greater, then we actually overflowed
digits into the mtime field, meaning our value was
effectively right-shifted by those lost octal digits. And
this patch is again a strict improvement over that.
But if the size was between 8GB and 64GB, then our 12-byte
field held all of the actual digits, and only our NUL
terminator overflowed. According to POSIX, there should be a
NUL or space at the end of the field. However, GNU tar seems
to be lenient here, and will correctly parse a size up 64GB
(minus one) from the field. So sizes in this range might
have just worked, depending on the implementation reading
the tarfile.
This patch is mostly still an improvement there, as the 8GB
limit is specifically mentioned in POSIX as the correct
limit. But it's possible that it could be a regression
(versus the pre-f2f0267 state) if all of the following are
true:
1. You have a file between 8GB and 64GB.
2. Your tar implementation _doesn't_ know about pax
extended headers.
3. Your tar implementation _does_ parse 12-byte sizes from
the ustar header without a delimiter.
It's probably not worth worrying about such an obscure set
of conditions, but I'm documenting it here just in case.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ustar format only has room for 11 (or 12, depending on
some implementations) octal digits for the size and mtime of
each file. For values larger than this, we have to add pax
extended headers to specify the real data, and git does not
yet know how to do so.
Before fixing that, let's start off with some test
infrastructure, as designing portable and efficient tests
for this is non-trivial.
We want to use the system tar to check our output (because
what we really care about is interoperability), but we can't
rely on it:
1. being able to read pax headers
2. being able to handle huge sizes or mtimes
3. supporting a "t" format we can parse
So as a prerequisite, we can feed the system tar a reference
tarball to make sure it can handle these features. The
reference tar here was created with:
dd if=/dev/zero seek=64G bs=1 count=1 of=huge
touch -d @68719476737 huge
tar cf - --format=pax |
head -c 2048
using GNU tar. Note that this is not a complete tarfile, but
it's enough to contain the headers we want to examine.
Likewise, we need to convince git that it has a 64GB blob to
output. Running "git add" on that 64GB file takes many
minutes of CPU, and even compressed, the result is 64MB. So
again, I pre-generated that loose object, and then took only
the first 2k of it. That should be enough to generate 2MB of
data before hitting an inflate error, which is plenty for us
to generate the tar header (and then die of SIGPIPE while
streaming the rest out).
The tests are split so that we test as much as we can even
with an uncooperative system tar. This actually catches the
current breakage (which is that we die("BUG") trying to
write the ustar header) on every system, and then on systems
where we can, we go farther and actually verify the result.
Helped-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In their effort to emulate POSIX as close as possible, the MSYS tools
and Cygwin treat the file name "foo.exe" as "foo" when the latter is
asked for, but not present, but the former is present.
Following this rule, 'cp /bin/sh a/bin' actually copies the file
/bin/sh.exe, so that we now have a/bin/sh.exe in the repository. This
difference did not matter in the tests in the past because we were only
interested in the equality of contents generated in various ways. But
recently added tests check file names, in particular, the presence of
"a/bin/sh". This test fails on Windows, as we do not have a file by this
name, but "a/bin/sh.exe".
Use test-genrandom to generate the large binary file in the repository
under the expected name.
We could change the guilty line to 'cat /bin/sh >a/bin/sh', but it is
better for test reproducibility to ensure that the test data is the same
across platforms, which test-genrandom can guarantee.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes two problems with using :(glob) (or even "*.c"
without ":(glob)").
The first one is we forgot to turn on the 'recursive' flag in struct
pathspec. Without that, tree_entry_interesting() will not mark
potential directories "interesting" so that it can confirm whether
those directories have anything matching the pathspec.
The marking directories interesting has a side effect that we need to
walk inside a directory to realize that there's nothing interested in
there. By that time, 'archive' code has already written the (empty)
directory down. That means lots of empty directories in the result
archive.
This problem is fixed by lazily writing directories down when we know
they are actually needed. There is a theoretical bug in this
implementation: we can't write empty trees/directories that match that
pathspec.
path_exists() is also made stricter in order to detect non-matching
pathspec because when this 'recursive' flag is on, we most likely
match some directories. The easiest way is not consider any
directories "matched".
Noticed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the whole directory of test files at once using git add instead of
calling git update-index on each of them and use git commit instead of
the plumbing commands write-tree, update-ref and commit-tree to build
the commit. This simplifies the code considerably.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_cmp() is primarily meant to compare text files (and display the
difference for debug purposes).
Raw "cmp" is better suited to compare binary files (tar, zip, etc.).
On MinGW, test_cmp is a shell function mingw_test_cmp that tries to
read both files into environment, stripping CR characters (introduced
in commit 4d715ac0).
This function usually speeds things up, as fork is extremly slow on
Windows. But no wonder that this function is extremely slow and
sometimes even crashes when comparing large tar or zip files.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit ee27ca4, we started restricting remote git-archive
invocations to only accessing reachable commits. This
matches what upload-pack allows, but does restrict some
useful cases (e.g., HEAD:foo). We loosened this in 0f544ee,
which allows `foo:bar` as long as `foo` is a ref tip.
However, that still doesn't allow many useful things, like:
1. Commits accessible from a ref, like `foo^:bar`, which
are reachable
2. Arbitrary sha1s, even if they are reachable.
We can do a full object-reachability check for these cases,
but it can be quite expensive if the client has sent us the
sha1 of a tree; we have to visit every sub-tree of every
commit in the worst case.
Let's instead give site admins an escape hatch, in case they
prefer the more liberal behavior. For many sites, the full
object database is public anyway (e.g., if you allow dumb
walker access), or the site admin may simply decide the
security/convenience tradeoff is not worth it.
This patch adds a new config option to disable the
restrictions added in ee27ca4. It defaults to off, meaning
there is no change in behavior by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t5000, we test the built-in ".tar.gz" config for
git-archive. To make our tests portable, we check that we
have a way to both gzip and gunzip, and we respected
environment variables to point to alternate commands for
doing these operations.
However, the $GZIP variable did not actually do anything, as
changing it would not affect the baked-in value in
archive-tar.c. Moreover, setting the variable $GZIP
influences gzip itself. From the gzip man page:
The environment variable GZIP can hold a set of default
options for gzip. These options are interpreted first and
can be overwritten by explicit command line parameters.
We could rename this variable, and use it to set up custom
config (or even have a Makefile knob to affect the built
binary), but it is not worth the trouble; nobody has ever
reported a problem with the baked-in default, and they can
always change it via config if they need to. Let's just drop
the variable and use "gzip" in the test (keeping the
prerequisite, of course).
While we're at it, we can drop the GUNZIP variable and
prerequisite; it uses "gzip -d", so if we have GZIP, we
will have both.
We can also use test_lazy_prereq for the gzip prerequisite,
which is simpler and behaves more consistently with the rest
of git (e.g., by making output available when the test is
run with "-v").
Noticed-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tar-tree" has been a thin wrapper around "git archive" since commit
fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to
git-archive, 2006-09-24), which also made it print a message indicating
that git-tar-tree is deprecated.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a file with a long name to the test archive in order to check
entries with pax extended headers. Also add a check for tar versions
that doen't understand this format. Those versions should extract the
headers as a regular files. Add code to check_tar() to interpret the
path header if present, so that our tests work even with those tar
versions.
It's important to use the fallback code only if needed to still be
able to detect git archive errorously creating pax headers as regular
file entries (with a suitable tar version, of course).
The archive used to check for pax header support in tar was generated
using GNU tar 1.26 and its option --format=pax.
Tested successfully on NetBSD 6.1, which has a tar version lacking pax
header support.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just compare the archives created by git tar-tree with the ones created
using git archive with the equivalent options, whose contents are
checked already, instead of extracting them again.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform the full range of checks against all archived files instead of
looking only at the file type of a few of them. Also add a test of a
git archive with a prefix ending in with a slash, i.e. adding a full
directory level.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a helper function that extracts a tar archive and checks its
contents, modelled after check_zip in t5003.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create the directories b and c just before they are needed instead of
up front. For t5003 it turns out we don't need them at all. For t5000
it makes the coming modifications easier.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating extra archives for testing substitutions, set the
attribute export-subst and overwrite the marked file with the expected
(expanded) content right between committing and archiving. Thus
placeholder expansion based on the committed content is performed with
each archive creation and the comparison with the contents of directory
a yields the correct result. We can then remove the special tests for
export-subst.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
