Extract the commonly used initialization of the --stat-width=<width>,
--stat-name-width=<width> and --stat-graph-with=<width> parameters to their
internal default values into a helper function, to avoid repeating the same
initialization code in a few places.
Add a couple of tests to additionally cover existing configuration options
diff.statNameWidth=<width> and diff.statGraphWidth=<width> when used by
git-merge to generate --stat outputs. This closes the gap that existed
previously in the --stat tests, and reduces the chances for having any
regressions introduced by this commit.
While there, perform a small bunch of minor wording tweaks in the improved
unit test, to improve its test-level consistency a bit.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call graph_clear() in release_revisions(), this will free memory
allocated by e.g. this command, which will now run without memory
leaks:
git -P log -1 --graph --no-graph --graph
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t4013 and t4015, which see independent development
elsewhere at the time of writing, we use `main` as the default branch
name in t4*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t4*.sh t4211/*.export &&
git checkout HEAD -- t4013\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 43662b23ab (format-patch: keep cover-letter diffstat wrapped in
72 columns - 2018-01-24) uncondtionally sets stat width to 72 when
generating diffstat for the cover letter, ignoring --stat from command
line. But it should only do so when stat width is still default
(i.e. stat_width == 0).
In order to fix this, we should only set stat_width if stat_width is
zero. But it will never be. Commit 071dd0ba43 (format-patch: reduce
patch diffstat width to 72 - 2018-02-01) makes sure that default stat
width will be 72 (ignoring $COLUMNS, but could still be overriden by
--stat). So all we need to do here is drop the assignment.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Helped-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches generated by format-patch are meant to be exchanged as emails,
most of the time. And since it's generally agreed that text in mails
should be wrapped around 70 columns or so, make sure these diffstat
follow the convention (especially when used with --cover-letter since we
already defaults to wrapping 72 columns). The default can still be
overriden with command line options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:
some_cmd >actual
test_cmp expect actual
The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "--graph" is about connected history while --no-walk is
about discrete points, it does not make sense to allow these two
options at the same time. [1]
This change makes a few calls to "show --graph" fail in t4052, but
asking to show one commit with graph is a nonsensical thing to do.
Thus, tests on "show --graph" in t4052 have been removed [2,3].
Same tests on "show" without --graph option have already been tested
in 4052.
3 testcases have been added to test this patch.
[1]: http://article.gmane.org/gmane.comp.version-control.git/216083
[2]: http://article.gmane.org/gmane.comp.version-control.git/264950
[3]: http://article.gmane.org/gmane.comp.version-control.git/265107
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Helped-By: René Scharfe <l.s.r@web.de>
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Spend only minimum number of columns necessary to show the number of lines
in the output from "diff --stat", instead of always allocating 4 columns
even when showing changes that are much smaller than 1000 lines.
By Zbigniew Jędrzejewski-Szmek
* zj/diff-stat-smaller-num-columns:
diff --stat: use less columns for change counts
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When COLUMNS or --stat-width restricts the diff-stat width to near the
minimum, 26 columns, the graph_width value becomes negative. Consequently, the
graph part of diff-stat is not resized properly.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust tests to verify that the commit history graph tree is taken into
consideration when the diff stat output width is calculated.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests which show that the width of the --prefix added by --graph
is not taken into consideration when the diff stat output width is
calculated.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the introduction on the limit of the width of the
graph part, a new test with COLUMNS=40 is added to check that the
environment variable influences diff, show, log, but not format-patch.
A new test is added because limiting the graph part makes COLUMNS=200
stop influencing diff --stat behaviour, which isn't wide enough now.
The old test with COLUMNS=200 is retained to check for regressions.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make merge --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make log --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make show --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for updates to the "diff --stat" that updates the logic
to split the allotted columns into the name part and the graph part to
make the output more readable, add a handful of tests to document the
corner case behaviour in which long filenames and big changes are shown.
When a pathname is so long that it cannot fit on the column, the current
code truncates it to make sure that the graph part has enough room to show
a meaningful graph. If the actual change is small (e.g. only one line
changed), this results in the final output that is shorter than the width
we aim for.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
