* maint-2.43: (40 commits)
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
...
* maint-2.42: (39 commits)
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
...
* maint-2.41: (38 commits)
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
...
* maint-2.40: (39 commits)
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
...
* maint-2.39: (38 commits)
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
fetch/clone: detect dubious ownership of local repositories
...
In the wake of fixing a vulnerability where `git clone` mistakenly
followed a symbolic link that it had just written while checking out
files, writing into a gitdir, let's add some defense-in-depth by
teaching `git fsck` to report symbolic links stored in its trees that
point inside `.git/`.
Even though the Git project never made any promises about the exact
shape of the `.git/` directory's contents, there are likely repositories
out there containing symbolic links that point inside the gitdir. For
that reason, let's only report these as warnings, not as errors.
Security-conscious users are encouraged to configure
`fsck.symlinkPointsToGitDir = error`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Update ref-related tests.
* ps/ref-tests-update:
t: mark several tests that assume the files backend with REFFILES
t7900: assert the absence of refs via git-for-each-ref(1)
t7300: assert exact states of repo
t4207: delete replace references via git-update-ref(1)
t1450: convert tests to remove worktrees via git-worktree(1)
t: convert tests to not access reflog via the filesystem
t: convert tests to not access symrefs via the filesystem
t: convert tests to not write references via the filesystem
t: allow skipping expected object ID in `ref-store update-ref`
Another step to deprecate test_i18ngrep.
* jc/test-i18ngrep:
tests: teach callers of test_i18ngrep to use test_grep
test framework: further deprecate test_i18ngrep
Add the REFFILES prerequisite to several tests that assume we're using
the files backend. There are various reasons why we cannot easily
convert those tests to be backend-independent, where the most common
one is that we have no way to write corrupt references into the refdb
via our tooling. We may at a later point in time grow the tooling to
make this possible, but for now we just mark these tests as requiring
the files backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests in t1450 create worktrees and then corrupt them.
As it is impossible to delete such worktrees via a normal call to `git
worktree remove`, we instead opt to remove them manually by calling
rm(1) instead.
This is ultimately unnecessary though as we can use the `-f` switch to
remove the worktree. Let's convert the tests to do so such that we don't
have to reach into internal implementation details of worktrees.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests access symbolic references via the filesystem
directly. While this works with the current files reference backend, it
this will break once we have a second reference backend in our codebase.
Refactor these tests to instead use git-symbolic-ref(1) or our
`ref-store` test tool. The latter is required in some cases where safety
checks of git-symbolic-ref(1) would otherwise reject writing a symbolic
reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests manually create, update or delete references by
writing the respective new values into the filesystem directly. While
this works with the current files reference backend, this will break
once we have a second reference backend implementation in our codebase.
Refactor these tests to instead use git-update-ref(1) or our `ref-store`
test tool. The latter is required in some cases where safety checks of
git-update-ref(1) would otherwise reject a reference update.
While at it, refactor some of the tests to schedule the cleanup command
via `test_when_finished` before modifying the repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, Git tries not to arbitrarily limit what it will store, and
there are currently no limits at all on the size of the path we find in
a tree. In theory you could have one that is gigabytes long.
But in practice this freedom is not really helping anybody, and is
potentially harmful:
1. Most operating systems have much lower limits for the size of a
single pathname component (e.g., on Linux you'll generally get
ENAMETOOLONG for anything over 255 bytes). And while you _can_ use
Git in a way that never touches the filesystem (manipulating the
index and trees directly), it's still probably not a good idea to
have gigantic tree names. Many operations load and traverse them,
so any clever Git-as-a-database scheme is likely to perform poorly
in that case.
2. We still have a lot of code which assumes strings are reasonably
sized, and I won't be at all surprised if you can trigger some
interesting integer overflows with gigantic pathnames. Stopping
malicious trees from entering the repository provides an extra line
of defense, protecting downstream code.
This patch implements an fsck check so that such trees can be rejected
by transfer.fsckObjects. I've picked a reasonably high maximum depth
here (4096) that hopefully should not bother anybody in practice. I've
also made it configurable, as an escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reporting a problem, `git fsck` emits a message such as:
missing blob 1234abcd (:file)
However, this can be ambiguous when the problem is detected in the index
of a worktree other than the one in which `git fsck` was invoked. To
address this shortcoming, 592ec63b38 (fsck: mention file path for index
errors, 2023-02-24) enhanced the output to mention the path of the index
when the problem is detected in some other worktree:
missing blob 1234abcd (.git/worktrees/wt/index:file)
Unfortunately, the variable in fsck_index() which controls whether the
index path should be shown is misleadingly named "is_main_index" which
can be misunderstood as referring to the main worktree (i.e. the one
housing the .git/ repository) rather than to the current worktree (i.e.
the one in which `git fsck` was invoked). Avoid such potential confusion
by choosing a name more reflective of its actual purpose.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 'fsck error and recovery on invalid object type' in file
t1450-fsck.sh redirects output of a failing "git fsck" invocation to
files "out" and "err" to assert presence of error messages in the output
of the command. Commit 31deb28f5e (fsck: don't hard die on invalid
object types, 2021-10-01) changed the way assertions in this test are
performed. The test doesn't compare the whole standard error with
prepared file "err.expect" and it doesn't assert that standard output is
empty.
Don't create unused files "err.expect" and "out" in test 'fsck error and
recovery on invalid object type'.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" learned to check the index files in other worktrees,
just like "git gc" honors them as anchoring points.
* jk/fsck-indices-in-worktrees:
fsck: check even zero-entry index files
fsck: mention file path for index errors
fsck: check index files in all worktrees
fsck: factor out index fsck
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many test scripts use hash-object to create malformed objects to see how
we handle the results in various commands. In some cases we already have
to use "hash-object --literally", because it does some rudimentary
quality checks. But let's use "--literally" more consistently to
future-proof these tests against hash-object learning to be more
careful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, a vulnerability was reported that can lead to an out-of-bounds
write when reading an unreasonably large gitattributes file. The root
cause of this error are multiple integer overflows in different parts of
the code when there are either too many lines, when paths are too long,
when attribute names are too long, or when there are too many attributes
declared for a pattern.
As all of these are related to size, it seems reasonable to restrict the
size of the gitattributes file via git-fsck(1). This allows us to both
stop distributing known-vulnerable objects via common hosting platforms
that have fsck enabled, and users to protect themselves by enabling the
`fetch.fsckObjects` config.
There are basically two checks:
1. We verify that size of the gitattributes file is smaller than
100MB.
2. We verify that the maximum line length does not exceed 2048
bytes.
With the preceding commits, both of these conditions would cause us to
either ignore the complete gitattributes file or blob in the first case,
or the specific line in the second case. Now with these consistency
checks added, we also grow the ability to stop distributing such files
in the first place when `receive.fsckObjects` is enabled.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --verify-objects" ought to inspect the contents of
objects and notice corrupted ones, but it didn't when the commit
graph is in use, which has been corrected.
* jk/rev-list-verify-objects-fix:
rev-list: disable commit graph with --verify-objects
lookup_commit_in_graph(): use prepare_commit_graph() to check for graph
Imagine we have a history with commit C pointing to a large blob B.
If a client asks us for C, we can generally serve both objects to them
without accessing the uncompressed contents of B. In upload-pack, we
figure out which commits we have and what the client has, and feed those
tips to pack-objects. In pack-objects, we traverse the commits and trees
(or use bitmaps!) to find the set of objects needed, but we never open
up B. When we serve it to the client, we can often pass the compressed
bytes directly from the on-disk packfile over the wire.
But if a client asks us directly for B, perhaps because they are doing
an on-demand fetch to fill in the missing blob of a partial clone, we
end up much slower. Upload-pack calls parse_object() on the oid we
receive, which opens up the object and re-checks its hash (even though
if it were a commit, we might skip this parse entirely in favor of the
commit graph!). And then we feed the oid directly to pack-objects, which
again calls parse_object() and opens the object. And then finally, when
we write out the result, we may send bytes straight from disk, but only
after having unnecessarily uncompressed and computed the sha1 of the
object twice!
This patch teaches both code paths to use the new SKIP_HASH_CHECK flag
for parse_object(). You can see the speed-up in p5600, which does a
blob:none clone followed by a checkout. The savings for git.git are
modest:
Test HEAD^ HEAD
----------------------------------------------------------------------
5600.3: checkout of result 2.23(4.19+0.24) 1.72(3.79+0.18) -22.9%
But the savings scale with the number of bytes. So on a repository like
linux.git with more files, we see more improvement (in both absolute and
relative numbers):
Test HEAD^ HEAD
----------------------------------------------------------------------------
5600.3: checkout of result 51.62(77.26+2.76) 34.86(61.41+2.63) -32.5%
And here's an even more extreme case. This is the android gradle-plugin
repository, whose tip checkout has ~3.7GB of files:
Test HEAD^ HEAD
--------------------------------------------------------------------------
5600.3: checkout of result 79.51(90.84+5.55) 40.28(51.88+5.67) -49.3%
Keep in mind that these timings are of the whole checkout operation. So
they count the client indexing the pack and actually writing out the
files. If we want to see just the server's view, we can hack up the
GIT_TRACE_PACKET output from those operations and replay it via
upload-pack. For the gradle example, that gives me:
Benchmark 1: GIT_PROTOCOL=version=2 git.old upload-pack ../gradle-plugin <input
Time (mean ± σ): 50.884 s ± 0.239 s [User: 51.450 s, System: 1.726 s]
Range (min … max): 50.608 s … 51.025 s 3 runs
Benchmark 2: GIT_PROTOCOL=version=2 git.new upload-pack ../gradle-plugin <input
Time (mean ± σ): 9.728 s ± 0.112 s [User: 10.466 s, System: 1.535 s]
Range (min … max): 9.618 s … 9.842 s 3 runs
Summary
'GIT_PROTOCOL=version=2 git.new upload-pack ../gradle-plugin <input' ran
5.23 ± 0.07 times faster than 'GIT_PROTOCOL=version=2 git.old upload-pack ../gradle-plugin <input'
So a server would see an 80% reduction in CPU serving the initial
checkout of a partial clone for this repository. Or possibly even more
depending on the packing; most of the time spent in the faster one were
objects we had to open during the write phase.
In both cases skipping the extra hashing on the server should be pretty
safe. The client doesn't trust the server anyway, so it will re-hash all
of the objects via index-pack. There is one thing to note, though: the
change in get_reference() affects not just pack-objects, but rev-list,
git-log, etc. We could use a flag to limit to index-pack here, but we
may already skip hash checks in this instance. For commits, we'd skip
anything we load via the commit-graph. And while before this commit we
would check a blob fed directly to rev-list on the command-line, we'd
skip checking that same blob if we found it by traversing a tree.
The exception for both is if --verify-objects is used. In that case,
we'll skip this optimization, and the new test makes sure we do this
correctly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the point of --verify-objects is to actually load and checksum the
bytes of each object, optimizing out reads using the commit graph runs
contrary to our goal.
The most targeted way to implement this would be for the revision
traversal code to check revs->verify_objects and avoid using the commit
graph. But it's difficult to be sure we've hit all of the correct spots.
For instance, I started this patch by writing the first of the included
test cases, where the corrupted commit is directly on rev-list's command
line. And that is easy to fix by teaching get_reference() to check
revs->verify_objects before calling lookup_commit_in_graph().
But that doesn't cover the second test case: when we traverse to a
corrupted commit, we'd parse the parent in process_parents(). So we'd
need to check there, too. And it keeps going. In handle_commit() we
sometimes parses commits, too, though I couldn't figure out a way to
trigger it that did not already parse via get_reference() or tag
peeling. And try_to_simplify_commit() has its own parse call, and so on.
So it seems like the safest thing is to just disable the commit graph
for the whole process when we see the --verify-objects option. We can do
that either in builtin/rev-list.c, where we use the option, or in
revision.c, where we parse it. There are some subtleties:
- putting it in rev-list.c is less surprising in some ways, because
there we know we are just doing a single traversal. In a command
which does multiple traversals in a single process, it's rather
unexpected to globally disable the commit graph.
- putting it in revision.c is less surprising in some ways, because
the caller does not have to remember to disable the graph
themselves. But this is already tricky! The verify_objects flag in
rev_info doesn't do anything by itself. The caller has to provide an
object callback which does the right thing.
- for that reason, in practice nobody but rev-list uses this option in
the first place. So the distinction is probably not important either
way. Arguably it should just be an option of rev-list, and not the
general revision machinery; right now you can run "git log
--verify-objects", but it does not actually do anything useful.
- checking for a parsed revs.verify_objects flag in rev-list.c is too
late. By that time we've already passed the arguments to
setup_revisions(), which will have parsed the commits using the
graph.
So this commit disables the graph as soon as we see the option in
revision.c. That's a pretty broad hammer, but it does what we want, and
in practice nobody but rev-list is using this flag anyway.
The tests cover both the "tip" and "parent" cases. Obviously our hammer
hits them both in this case, but it's good to check both in case
somebody later tries the more focused approach.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the normal tree_desc code to iterate over trees in fsck, meaning
we only see the canonicalized modes it returns. And hence we'd never see
anything unexpected, since it will coerce literally any garbage into one
of our normal and accepted modes.
We can use the new RAW_MODES flag to see the real modes, and then use
the existing code to actually analyze them. The existing code is written
as allow-known-good, so there's not much point in testing a variety of
breakages. The one tested here should be S_IFREG but with nonsense
permissions.
Do note that the error-reporting here isn't great. We don't mention the
specific bad mode, but just that the tree has one or more broken modes.
But when you go to look at it with "git ls-tree", we'll report the
canonicalized mode! This isn't ideal, but given that this should come up
rarely, and that any number of other tree corruptions might force you
into looking at the binary bytes via "cat-file", it's not the end of the
world. And it's something we can improve on top later if we choose.
Reported-by: Xavier Morel <xavier.morel@masklinn.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my 3b6a8db3b0 (object-file.c: use "enum" return
type for unpack_loose_header(), 2021-10-01) revealed both by running
the test suite with --valgrind, and with the amended "git fsck" test.
In practice this regression in v2.34.0 caused us to claim that we
couldn't parse the header, as opposed to not being able to unpack
it. Before the change in the C code the test_cmp added here would emit:
-error: unable to unpack header of ./objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
+error: unable to parse header of ./objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
I.e. we'd proceed to call parse_loose_header() on the uninitialized
"hdr" value, and it would have been very unlikely for that
uninitialized memory to be a valid git object.
The other callers of unpack_loose_header() were already checking the
enum values exhaustively. See 3b6a8db3b0 and
5848fb11ac (object-file.c: return ULHR_TOO_LONG on "header too long",
2021-10-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case wants to append stuff to a loose object file to ensure
that this kind of corruption is detected. To make a read-only loose
object file writable with chmod, it is not necessary to also make
it executable. Replace the bitmask 755 with the instruction +w to
request only the write bit and to also heed the umask. And get rid
of a POSIXPERM prerequisite, which is unnecessary for the test.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the error that's emitted in cases where we find a loose object
we parse, but which isn't at the location we expect it to be.
Before this change we'd prefix the error with a not-a-OID derived from
the path at which the object was found, due to an emergent behavior in
how we'd end up with an "OID" in these codepaths.
Now we'll instead say what object we hashed, and what path it was
found at. Before this patch series e.g.:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2
$ mv objects/e6/ objects/e7
Would emit ("[...]" used to abbreviate the OIDs):
git fsck
error: hash mismatch for ./objects/e7/9d[...] (expected e79d[...])
error: e79d[...]: object corrupt or missing: ./objects/e7/9d[...]
Now we'll instead emit:
error: e69d[...]: hash-path mismatch, found at: ./objects/e7/9d[...]
Furthermore, we'll do the right thing when the object type and its
location are bad. I.e. this case:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ mv objects/83 objects/84
As noted in an earlier commits we'd simply die early in those cases,
until preceding commits fixed the hard die on invalid object type:
$ git fsck
fatal: invalid object type
Now we'll instead emit sensible error messages:
$ git fsck
error: 8315[...]: hash-path mismatch, found at: ./objects/84/15[...]
error: 8315[...]: object is of unknown type 'garbage': ./objects/84/15[...]
In both fsck.c and object-file.c we're using null_oid as a sentinel
value for checking whether we got far enough to be certain that the
issue was indeed this OID mismatch.
We need to add the "object corrupt or missing" special-case to deal
with cases where read_loose_object() will return an error before
completing check_object_signature(), e.g. if we have an error in
unpack_loose_rest() because we find garbage after the valid gzip
content:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2
$ chmod 755 objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ echo garbage >>objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ git fsck
error: garbage at end of loose object 'e69d[...]'
error: unable to unpack contents of ./objects/e6/9d[...]
error: e69d[...]: object corrupt or missing: ./objects/e6/9d[...]
There is currently some weird messaging in the edge case when the two
are combined, i.e. because we're not explicitly passing along an error
state about this specific scenario from check_stream_oid() via
read_loose_object() we'll end up printing the null OID if an object is
of an unknown type *and* it can't be unpacked by zlib, e.g.:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ chmod 755 objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ echo garbage >>objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ /usr/bin/git fsck
fatal: invalid object type
$ ~/g/git/git fsck
error: garbage at end of loose object '8315a83d2acc4c174aed59430f9a9c4ed926440f'
error: unable to unpack contents of ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 8315a83d2acc4c174aed59430f9a9c4ed926440f: object corrupt or missing: ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 0000000000000000000000000000000000000000: object is of unknown type 'garbage': ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
[...]
I think it's OK to leave that for future improvements, which would
involve enum-ifying more error state as we've done with "enum
unpack_loose_header_result" in preceding commits. In these
increasingly more obscure cases the worst that can happen is that
we'll get slightly nonsensical or inapplicable error messages.
There's other such potential edge cases, all of which might produce
some confusing messaging, but still be handled correctly as far as
passing along errors goes. E.g. if check_object_signature() returns
and oideq(real_oid, null_oid()) is true, which could happen if it
returns -1 due to the read_istream() call having failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error fsck emits on invalid object types, such as:
$ git hash-object --stdin -w -t garbage --literally </dev/null
<OID>
From the very ungraceful error of:
$ git fsck
fatal: invalid object type
$
To:
$ git fsck
error: <OID>: object is of unknown type 'garbage': <OID_PATH>
[ other fsck output ]
We'll still exit with non-zero, but now we'll finish the rest of the
traversal. The tests that's being added here asserts that we'll still
complain about other fsck issues (e.g. an unrelated dangling blob).
To do this we need to pass down the "OBJECT_INFO_ALLOW_UNKNOWN_TYPE"
flag from read_loose_object() through to parse_loose_header(). Since
the read_loose_object() function is only used in builtin/fsck.c we can
simply change it to accept a "struct object_info" (which contains the
OBJECT_INFO_ALLOW_UNKNOWN_TYPE in its flags). See
f6371f9210 (sha1_file: add read_loose_object() function, 2017-01-13)
for the introduction of read_loose_object().
Since we'll need a "struct strbuf" to hold the "type_name" let's pass
it to the for_each_loose_file_in_objdir() callback to avoid allocating
a new one for each loose object in the iteration. It also makes the
memory management simpler than sticking it in fsck_loose() itself, as
we'll only need to strbuf_reset() it, with no need to do a
strbuf_release() before each "return".
Before this commit we'd never check the "type" if read_loose_object()
failed, but now we do. We therefore need to initialize it to OBJ_NONE
to be able to tell the difference between e.g. its
unpack_loose_header() having failed, and us getting past that and into
parse_loose_header().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There wasn't any output tests for this scenario, let's ensure that we
don't regress on it in the changes that come after this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fsck we move an object around between .git/objects/?? directories
to simulate a hash mismatch "git fsck" will currently hard die() in
object-file.c. This behavior will be fixed in subsequent commits, but
let's test for it as-is for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor one of the fsck tests to use a throwaway repository. It's a
pervasive pattern in t1450-fsck.sh to spend a lot of effort on the
teardown of a tests so we're not leaving corrupt content for the next
test.
We can instead use the pattern of creating a named sub-repository,
then we don't have to worry about cleaning up after ourselves, nobody
will care what state the broken "hash-mismatch" repository is after
this test runs.
See [1] for related discussion on various "modern" test patterns that
can be used to avoid verbosity and increase reliability.
1. https://lore.kernel.org/git/87y27veeyj.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a blindspot in the fsck tests by checking what we do when we
encounter an unknown "garbage" type produced with hash-object's
--literally option.
This behavior needs to be improved, which'll be done in subsequent
patches, but for now let's test for the current behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
Fix "git fsck --name-objects" which apparently has not been used by
anybody who is motivated enough to report breakage.
* js/fsck-name-objects-fix:
fsck --name-objects: be more careful parsing generation numbers
t1450: robustify `remove_object()`
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7b35efd734 (fsck_walk(): optionally name objects on the go,
2016-07-17), the `fsck` machinery learned to optionally name the
objects, so that it is easier to see what part of the repository is in a
bad shape, say, when objects are missing.
To save on complexity, this machinery uses a parser to determine the
name of a parent given a commit's name: any `~<n>` suffix is parsed and
the parent's name is formed from the prefix together with `~<n+1>`.
However, this parser has a bug: if it finds a suffix `<n>` that is _not_
`~<n>`, it will mistake the empty string for the prefix and `<n>` for
the generation number. In other words, it will generate a name of the
form `~<bogus-number>`.
Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be simplified by using the `test_oid_to_path()`
helper, which incidentally also makes it more robust by not relying on
the exact file system layout of the loose object files.
While at it, do not define those functions in a test case, it buys us
nothing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
We use
printf '\0'
to generate a NUL byte which we then `dd` into the packfile to ensure
that we modify the first byte of the first object, thereby
(probabilistically) invalidating the checksum. Except the single quotes
we're using are interpreted to match with the ones we enclose the whole
test in. So we actually execute
printf \0
and end up injecting the ASCII code for "0", 0x30, instead.
The comment right above this `printf` invocation says that "at least one
of [the type bits] is not zero, so setting the first byte to 0 is
sufficient". Substituting "0x30" for "0" in that comment won't do: we'd
need to reason about which bits go where and just what the packfile
looks like that we're modifying in this test.
Let's avoid all of that by actually executing
printf "\0"
to generate a NUL byte, as intended.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
