Since b3b18d1621 (advice: revamp advise API, 2020-03-02), we can use
advise_if_enabled() to display an advice. This API encapsulates three
actions:
1.- checking the visibility of the advice
2.- displaying the advice when appropriate
3.- displaying instructions on how to disable the advice, when
appropriate
The code we have in builtin/add.c to display the ADVICE_ADD_IGNORED_FILE
advice, is doing these three things. However, the instructions
displayed on how to disable the hint are not shown in the normalized way
that advise_if_enabled() introduced. This may cause distraction.
There is no reason not to use the new API here. On the contrary, by
using it we gain simplicity in the code and avoid possible distractions.
For these reasons, use the newer advise_if_enabled() machinery to show
the ADVICE_ADD_IGNORED_FILE advice, and don't bother checking the
visibility or displaying the instruction on how to disable the advice.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By definition, a detached HEAD state is tentative and there is no
configured "upstream" that it always wants to integrate with. But
if you detach from a branch that is behind its upstream, e.g.,
$ git checkout -t -b main origin/main
$ git checkout main
$ git reset --hard HEAD^
$ git checkout --detach main
you'd see "you are behind your upstream origin/main". This does not
happen when you replace the last step in the above with any of these
$ git checkout HEAD^0
$ git checkout --detach HEAD
$ git checkout --detach origin/main
Before 32669671 (checkout: introduce --detach synonym for "git
checkout foo^{commit}", 2011-02-08) introduced the "--detach"
option, the rule to decide if we show the tracking information
used to be:
If --quiet is not given, and if the given branch name is a real
local branch (i.e. the one we can compute the file path under
.git/, like 'refs/heads/master' or "HEAD" which stand for the
name of the current branch", then give the tracking information.
to exclude things like "git checkout master^0" (which was the
official way to detach HEAD at the commit before that commit) and
"git checkout origin/master^0" from showing tracking information,
but still do show the tracking information for the current branch
for "git checkout HEAD". The introduction of an explicit option
"--detach" broke this subtley. The new rule should have been
If --quiet is given, do not bother with tracking info.
If --detach is given, do not bother with tracking info.
Otherwise, if we know that the branch name given is a real local
branch, or if we were given "HEAD" and "HEAD" is not detached,
then attempt to show the tracking info.
but it allowed "git checkout --detach master" to also show the
tracking info by mistake. Let's tighten the rule to fix this.
Reported-by: mirth hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The status.showUntrackedFiles configuration variable had a name
that tempts users to set a Boolean value expressed in our usual
"false", "off", and "0", but it only took "no". This has been
corrected so "true" and its synonyms are taken as "normal", while
"false" and its synonyms are taken as "no".
* jc/show-untracked-false:
status: allow --untracked=false and friends
status: unify parsing of --untracked= and status.showUntrackedFiles
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
As with git-rebase(1) and git-am(1), git-cherry-pick(1) can result in a
commit being made redundant if the content from the picked commit is
already present in the target history. However, git-cherry-pick(1) does
not have the same options available that git-rebase(1) and git-am(1) have.
There are three things that can be done with these redundant commits:
drop them, keep them, or have the cherry-pick stop and wait for the user
to take an action. git-rebase(1) has the `--empty` option added in commit
e98c4269c8 (rebase (interactive-backend): fix handling of commits that
become empty, 2020-02-15), which handles all three of these scenarios.
Similarly, git-am(1) got its own `--empty` in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09).
git-cherry-pick(1), on the other hand, only supports two of the three
possiblities: Keep the redundant commits via `--keep-redundant-commits`,
or have the cherry-pick fail by not specifying that option. There is no
way to automatically drop redundant commits.
In order to bring git-cherry-pick(1) more in-line with git-rebase(1) and
git-am(1), this commit adds an `--empty` option to git-cherry-pick(1). It
has the same three options (keep, drop, and stop), and largely behaves
the same. The notable difference is that for git-cherry-pick(1), the
default will be `stop`, which maintains the current behavior when the
option is not specified.
Like the existing `--keep-redundant-commits`, `--empty=keep` will imply
`--allow-empty`.
The `--keep-redundant-commits` option will be documented as a deprecated
synonym of `--empty=keep`, and will be supported for backwards
compatibility for the time being.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--keep-redundant-commits` was added in b27cfb0d8d
(git-cherry-pick: Add keep-redundant-commits option, 2012-04-20), it was
not marked as incompatible with the various operations needed to
continue or exit a cherry-pick (`--continue`, `--skip`, `--abort`, and
`--quit`).
Enforce this incompatibility via `verify_opt_compatible` like we do for
the other various options.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-am(1) got its own `--empty` option in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09), `stop` was used
instead of `ask`. `stop` is a more accurate term for describing what
really happens, and consistency is good.
Update git-rebase(1) to also use `stop`, while keeping `ask` as a
deprecated synonym. Update the tests to primarily use `stop`, but also
ensure that `ask` is still allowed.
In a future commit, we'll be adding a new `--empty` option for
git-cherry-pick(1) as well, making the consistency even more relevant.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bugreport --no-suffix" was not supported and instead
segfaulted, which has been corrected.
* js/bugreport-no-suffix-fix:
bugreport.c: fix a crash in `git bugreport` with `--no-suffix` option
Report unknown format elements and missing closing parentheses with
consistent and translated messages by calling strbuf_expand_bad_format()
at the very end of the combined if/else chain of expand_format() and
expand_atom().
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a function for reporting placeholders that are not enclosed in a
parenthesis or are unknown. This reduces the number of strings to
translate and improves consistency across commands. Call it at the end
of the if/else chain, after exhausting all accepted possibilities.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git maintenance run --auto`, then the various subtasks
will only run as needed. Thus, we for example end up only packing loose
objects if we hit a certain threshold.
Interestingly enough, the "pack-refs" task is actually _never_ executed
when the auto-flag is set because it does not have a condition at all.
As 41abfe15d9 (maintenance: add pack-refs task, 2021-02-09) mentions:
The 'auto_condition' function pointer is left NULL for now. We could
extend this in the future to have a condition check if pack-refs
should be run during 'git maintenance run --auto'.
It is not quite clear from that quote whether it is actually intended
that the task doesn't run at all in this mode. Also, no test was added
to verify this behaviour. Ultimately though, it feels quite surprising
that `git maintenance run --auto --task=pack-refs` would quietly never
do anything at all.
In any case, now that we do have the logic in place to let ref backends
decide whether or not to repack refs, it does make sense to wire it up
accordingly. With the "reftable" backend we will thus now perform
auto-compaction, which optimizes the refdb as needed.
But for the "files" backend we now unconditionally pack refs as it does
not yet know to handle the "auto" flag. Arguably, this can be seen as a
bug fix given that previously the task never did anything at all.
Eventually though we should amend the "files" backend to use some
heuristics for auto compaction, as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Forward the `--auto` flag to git-pack-refs(1) when it has been invoked
with this flag itself. This does not change anything for the "files"
backend, which will continue to eagerly pack refs. But it does ensure
that the "reftable" backend only compacts refs as required.
This change does not impact git-maintenance(1) because this command will
in fact never run the pack-refs task when run with `--auto`. This issue
will be addressed in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to start using `struct maintenance_run_opts` in
`maintenance_task_pack_refs()`. Move its definition up to prepare for
this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling git-pack-refs(1) will unconditionally cause it to pack all
requested refs regardless of the current state of the ref database. For
example:
- With the "files" backend we will end up rewriting the complete
"packed-refs" file even if only a single ref would require
compaction.
- With the "reftable" backend we will end up always compacting all
tables into a single table.
This behaviour can be completely unnecessary depending on the backend
and is thus wasteful.
With the introduction of the `PACK_REFS_AUTO` flag in the preceding
commit we can improve this and let the backends decide for themselves
whether to pack refs in the first place. Expose this functionality via a
new "--auto" flag in git-pack-refs(1), which mirrors the same flag in
both git-gc(1) and git-maintenance(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the command line options in `cmd_pack_refs()` require us to
allocate memory. This memory is never released and thus leaking, but we
paper over this leak by declaring the respective variables as `static`
function-level variables, which is somewhat awkward.
Refactor the code to release the allocated memory and drop the `static`
declaration. While at it, remove the useless `flags` variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent of the `PACK_REFS_ALL` flag is to ask the backend to compact
all refs instead of only a subset of them. Thus, this flag gets passed
down to `refs_pack_refs()` via `struct pack_refs_opts::flags`.
But starting with 4fe42f326e (pack-refs: teach pack-refs --include
option, 2023-05-12), the flag's semantics have changed. Instead of being
handled by the respective backends, this flag is now getting handled by
the callers of `refs_pack_refs()` which will add a single glob ("*") to
the list of refs-to-be-packed. Thus, the flag serves no purpose to the
ref backends anymore.
Remove the flag and replace it with a local variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the run_am() function, we set up a child_process struct to run
"git-am", allocating memory for its args and env strvecs. These are
normally cleaned up when we call run_command(). But if we encounter
certain errors, we exit the function early and try to clean up ourselves
by clearing the am.args field. This leaks the "env" strvec.
We should use child_process_clear() instead, which covers both. And more
importantly, it future proofs us against the struct ever growing more
allocated fields.
These are unlikely errors to happen in practice, so they don't actually
trigger the leak sanitizer in the tests. But we can add a new test which
does exercise one of the paths (and fails SANITIZE=leak without this
patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pretty-printing a commit in the email format, we have to fill in
the "after subject" field of the pretty_print_context with any extra
headers the user provided (e.g., from "--to" or "--cc" options) plus any
special MIME headers.
We return an out-pointer that sometimes points to a newly heap-allocated
string and sometimes not. To avoid leaking, we store the allocated
version in a buffer with static lifetime, which is ugly. Worse, as we
extend the header feature, we'll end up having to repeat this ugly
pattern.
Instead, let's have our out-pointer pass ownership back to the caller,
and duplicate the string when necessary. This does mean one extra
allocation per commit when you use extra headers, but in the context of
format-patch which is showing diffs, I don't think that's even
measurable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With one exception, the print_email_subject flag is set if and only if
the commit format is email based:
- in make_cover_letter() we set it along with CMIT_FMT_EMAIL
explicitly
- in show_log(), we set it if cmit_fmt_is_mail() is true. That covers
format-patch as well as "git log --format=email" (or mboxrd).
The one exception is "rev-list --format=email", which somewhat
nonsensically prints the author and date as email headers, but no
subject, like:
$ git rev-list --format=email HEAD
commit 64fc4c2cdd4db2645eaabb47aa4bac820b03cdba
From: Jeff King <peff@peff.net>
Date: Tue, 19 Mar 2024 19:39:26 -0400
this is the subject
this is the body
It's doubtful that this is a useful format at all (the "commit" lines
replace the "From" lines that would make it work as an actual mbox).
But I think that printing the subject as a header (like this patch does)
is the least surprising thing to do.
So let's drop this field, making the code a little simpler and easier to
reason about. Note that we do need to set the "rev" field of the
pretty_print_context in rev-list, since that is used to check for
subject_prefix, etc. It's not possible to set those fields via rev-list,
so we'll always just print "Subject: ". But unless we pass in our
rev_info, fmt_output_email_subject() would segfault trying to figure it
out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pp_title_line() function is used for two formats: the oneline format
and the subject line of the email format. But most of the logic in the
function does not make any sense for oneline; it is about special
formatting of email headers.
Lumping the two formats together made sense long ago in 4234a76167
(Extend --pretty=oneline to cover the first paragraph, 2007-06-11), when
there was a lot of manual logic to paste lines together. But later,
88c44735ab (pretty: factor out format_subject(), 2008-12-27) pulled that
logic into its own function.
We can implement the oneline format by just calling that one function.
This makes the intention of the code much more clear, as we know we only
need to worry about those extra email options when dealing with actual
email.
While the intent here is cleanup, it is possible to trigger these cases
in practice by running format-patch with an explicit --oneline option.
But if you did, the results are basically nonsense. For example, with
the preserve_subject flag:
$ printf "%s\n" one two three | git commit --allow-empty -F -
$ git format-patch -1 --stdout -k | grep ^Subject
Subject: =?UTF-8?q?one=0Atwo=0Athree?=
$ git format-patch -1 --stdout -k --oneline --no-signature
2af7fbe one
two
three
Or with extra headers:
$ git format-patch -1 --stdout --cc=me --oneline --no-signature
2af7fbe one two three
Cc: me
So I'd actually consider this to be an improvement, though you are
probably crazy to use other formats with format-patch in the first place
(arguably it should forbid non-email formats entirely, but that's a
bigger change).
As a bonus, it eliminates some pointless extra allocations for the
oneline output. The email code, since it has to deal with wrapping,
formats into an extra auxiliary buffer. The speedup is tiny, though like
"rev-list --no-abbrev --format=oneline" seems to improve by a consistent
1-2% for me.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When shortlog processes a commit using its internal traversal, it may
pretty-print the subject line for the summary view. When we do so, we
set the "print_email_subject" flag in the pretty-print context. But this
flag does nothing! Since we are using CMIT_FMT_USERFORMAT, we skip most
of the usual formatting code entirely.
This flag is there due to commit 6d167fd7cc (pretty: use
fmt_output_email_subject(), 2017-03-01). But that just switched us away
from setting an empty "subject" header field, which was similarly
useless. That was added by dd2e794a21 (Refactor pretty_print_commit
arguments into a struct, 2009-10-19). Before using the struct, we had to
pass _something_ as the argument, so we passed the empty string (a NULL
would have worked equally well).
So this setting has never done anything, and we can drop the line. That
shortens the code, but more importantly, makes it easier to reason about
and refactor the other users of this flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code simplification by getting rid of code that sets an environment
variable that is no longer used.
* pw/rebase-i-ignore-cherry-pick-help-environment:
rebase -i: stop setting GIT_CHERRY_PICK_HELP
When 'git am' or 'git rebase --apply' encounter a conflict, they show a
message instructing the user how to continue the operation. This message
can't be disabled.
Use ADVICE_MERGE_CONFLICT introduced in the previous commit to allow
disabling it. Update the tests accordingly, as the advice output is now
on stderr instead of stdout. In t4150, redirect stdout to 'out' and
stderr to 'err', since this is less confusing. In t4254, as we are
testing a specific failure mode of 'git am', simply disable the advice.
Note that we are not testing that this advice is shown in 'git rebase'
for the apply backend since 2ac0d6273f (rebase: change the default
backend from "am" to "merge", 2020-02-15).
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git bugreport` does not complain when `--no-suffix` is given, but
it leads to a segmentation fault as the it is not prepared to see a
NULL assigned to the option_suffix variable.
Signed-off-by: Jiamu Sun <barroit@linux.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extending the previous step, this allows the whitespace placed after
the value before the "# comment message" to be tweaked by tweaking
the preprocessing rule to:
* If the given comment string begins with one or more whitespace
characters followed by '#', it is passed intact.
* If the given comment string begins with '#', a Space is
prepended.
* Otherwise, " # " (Space, '#', Space) is prefixed.
* A string with LF in it cannot be used as a comment string.
Unlike the previous step, which unconditionally added a space after
the value before writing the "# comment string", because the above
preprocessing already gives a whitespace before the '#', the
resulting string is written immediately after copying the value.
And the sanity checking rule becomes
* comment string after the above massaging that comes into
git_config_set_multivar_in_file_gently() must
- begin with zero or more whitespace characters followed by '#'.
- not have a LF in it.
I personally think this is over-engineered, but since I thought
things through anyway, here it is in the patch form. The logic to
tweak end-user supplied comment string is encapsulated in a new
helper function, git_config_prepare_comment_string(), so if new
front-end callers would want to use the same massaging rules, it is
easily reused.
Unfortunately I do not think of a way to tweak the preprocessing
rules further to optionally allow having no blank after the value,
i.e. to produce
[section]
variable = value#comment
(which is a valid way to say section.variable=value, by the way)
without sacrificing the ergonomics for the more usual case, so this
time I really stop here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git adds comments itself (like "rebase -i" todo list and
"commit -e" log message editor), it always gives a comment
introducer "#" followed by a Space before the message, except for
the recently introduced "git config --comment", where the users are
forced to say " this is my comment" if they want to add their
comment in this usual format; otherwise their comment string will
end up without a space after the "#".
Make it more ergonomic, while keeping it possible to also use this
unusual style, by massaging the comment string at the UI layer with
a set of simple rules:
* If the given comment string begins with '#', it is passed intact.
* Otherwise, "# " is prefixed.
* A string with LF in it cannot be used as a comment string.
Right now there is only one "front-end" that accepts end-user
comment string and calls the underlying machinery to add or modify
configuration file with comments, but to make sure that the future
callers perform similar massaging as they see fit, add a sanity
check logic in git_config_set_multivar_in_file_gently(), which is
the single choke point in the codepaths that consumes the comment
string.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Uses of xwrite() helper have been audited and updated for better
error checking and simpler code.
* jc/xwrite-cleanup:
repack: check error writing to pack-objects subprocess
sideband: avoid short write(2)
unpack: replace xwrite() loop with write_in_full()
When git refuses to create a branch because the proposed branch
name is not a valid refname, an advice message is given to refer
the user to exact naming rules.
* kh/branch-ref-syntax-advice:
branch: advise about ref syntax rules
advice: use double quotes for regular quoting
advice: use backticks for verbatim
advice: make all entries stylistically consistent
t3200: improve test style
Introduce the ability to append comments to modifications
made using git-config. Example usage:
git config --comment "changed via script" \
--add safe.directory /home/alice/repo.git
based on the proposed patch, the output produced is:
[safe]
directory = /home/alice/repo.git #changed via script
Users need to be able to distinguish between config entries made
using automation and entries made by a human. Automation can add
comments containing a URL pointing to explanations for the change
made, avoiding questions from users as to why their config file
was changed by a third party.
The implementation ensures that a # character is unconditionally
prepended to the provided comment string, and that the comment
text is appended as a suffix to the changed key-value-pair in the
same line of text. Multi-line comments (i.e. comments containing
linefeed) are rejected as errors, causing Git to exit without
making changes.
Comments are aimed at humans who inspect or change their Git
config using a pager or editor. Comments are not meant to be
read or displayed by git-config at a later time.
Signed-off-by: Ralph Seichter <github@seichter.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trailer API updates.
Acked-by: Christian Couder <christian.couder@gmail.com>
cf. <CAP8UFD1Zd+9q0z1JmfOf60S2vn5-sD3SafDvAJUzRFwHJKcb8A@mail.gmail.com>
* la/trailer-api:
format_trailers_from_commit(): indirectly call trailer_info_get()
format_trailer_info(): move "fast path" to caller
format_trailers(): use strbuf instead of FILE
trailer_info_get(): reorder parameters
trailer: move interpret_trailers() to interpret-trailers.c
trailer: reorder format_trailers_from_commit() parameters
trailer: rename functions to use 'trailer'
shortlog: add test for de-duplicating folded trailers
trailer: free trailer_info _after_ all related usage
The implementation in "git clean" that makes "-n" and "-i" ignore
clean.requireForce has been simplified, together with the
documentation.
* so/clean-dry-run-without-force:
clean: further clean-up of implementation around "--force"
clean: improve -n and -f implementation and documentation
In git-restore we need to free the pathspec and pathspec_from_file
values from the struct checkout_opts.
A simple fix could be to free them in cmd_restore, after the call to
checkout_main returns, like we are doing [1][2] in the sibling function
cmd_checkout.
However, we can do even better.
We have git-switch and git-restore, both of them spin-offs[3][4] of
git-checkout. All three are implemented as thin wrappers around
checkout_main. Considering this, it makes a lot of sense to do the
cleanup closer to checkout_main.
Move the cleanups, including the new_branch_info variable, to
checkout_main.
As a consequence, mark: t2070, t2071, t2072 and t6418 as leak-free.
[1] 9081a421a6 (checkout: fix "branch info" memory leaks, 2021-11-16)
[2] 7ce4088ab7 (parse-options: consistently allocate memory in
fix_filename(), 2023-03-04)
[3] d787d311db (checkout: split part of it to new command 'switch',
2019-03-29)
[4] 46e91b663b (checkout: split part of it to new command 'restore',
2019-04-25)
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git checkout" to recreate merge conflicts or merge
uncommitted changes when switching branch "--conflict" sensibly implies
"--merge". Unfortunately the way this is implemented means that "git
checkout --conflict=diff3 --no-merge" implies "--merge" violating the
usual last-one-wins rule. Fix this by only overriding the value of
opts->merge if "--conflicts" comes after "--no-merge" or "-[-no]-merge"
is not given on the command line.
The behavior of "git checkout --merge --no-conflict" is unchanged and
will still merge on the basis that the "-[-no]-conflict" options are
primarily intended to affect the conflict style and so "--no-conflict"
should cancel a previous "--conflict" but not override "--merge".
Of the four new tests the second one tests the behavior change
introduced by this commit, the other three check that this commit does
not regress the existing behavior.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passing an invalid conflict style name such as "--conflict=bad" gives
the error message
error: unknown style 'bad' given for 'merge.conflictstyle'
which is unfortunate as it talks about a config setting rather than
the option given on the command line. This happens because the
implementation calls git_xmerge_config() to set the conflict style
using the value given on the command line. Use the newly added
parse_conflict_style_name() instead and pass the value down the call
chain to override the config setting. This also means we can avoid
setting up a struct config_context required for calling
git_xmerge_config().
The option is now parsed in a callback to avoid having to store the
option name. This is a change in behavior as now
git checkout --conflict=bad --conflict=diff3
will error out when parsing "--conflict=bad" whereas before this change
it would succeed because it would only try to parse the value of the
last "--conflict" option given on the command line.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a macro to initialize `struct ll_merge_options` in preparation
for the next commit that will add a new member that needs to be
initialized to a non-zero value.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is natural to expect that the "--untracked" option and the
status.showuntrackedFiles configuration variable to take a Boolean
value ("do you want me to show untracked files?"), but the current
code takes nothing but "no" as "no, please do not show any".
Allow the usual Boolean values to be given, and treat 'true' as
"normal", and 'false' as "no".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two code paths that take a string and parse it to enum
untracked_status_type. Introduce a helper function and use it.
As these two places handle an error differently, add an additional
invalid value to the enum, and have the caller of the helper handle
the error condition, instead of dying or emitting error message from
the helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, we should
use the string variable rather than the historical character variable.
All of the sites adjusted here are just swapping out "%c" for "%s" in
format strings, or strbuf_addch() for strbuf_addstr(). The type system
and printf-attribute give the compiler enough information to make sure
our formats and variable changes all match (especially important for
cases where the format string is defined far away from its use, like
prepare_to_commit() in commit.c).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_add_commented_lines() rather
than a single character.
All of the callers have to be adjusted; most can just pass
comment_line_str rather than comment_line_char.
And now our "cheat" in strbuf_commented_addf() can go away, as we can
take the full string from it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_commented_addf() rather than a
single character.
All of the callers have to be adjusted, but they can just pass
comment_line_str rather than comment_line_char.
Note that we rely on strbuf_add_commented_lines() under the hood, so
we'll cheat a bit to squeeze our string into a single character (for now
the two are equivalent, and we'll address this TODO in the next patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_stripspace(), rather than a
single character. We can continue to support its feature of ignoring
comments by accepting a NULL pointer (as opposed to the current behavior
of a NUL byte).
All of the callers have to be adjusted, but they can all just pass
comment_line_str (or NULL).
Inside the function we detect comments by comparing the first byte of a
line to the comment character. We'll adjust that to use starts_with(),
which will match multiple bytes (though for now, of course, we still
only allow a single byte, so it's academic).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'd like to eventually support multi-byte comment prefixes, but the
comment_line_char variable is referenced in many spots, making the
transition difficult.
Let's start by storing the character in a NUL-terminated string. That
will let us switch code over incrementally to the string format, and we
can easily support the existing code with a macro wrapper (since we'll
continue to allow only a single-byte prefix, this will behave
identically).
Once all references to the "char" variable have been converted, we can
drop it and enable longer strings.
We'll still have to touch all of the spots that create or set the
variable in this patch, but there are only a few (reading the config,
and the "auto" character selector).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.commentChar is set to "auto", we check a set of candidate
characters against the proposed buffer to see which if any can be used
without ambiguity. But before we do that, we optimize for the common
case that the default "#" is fine by just seeing if it is present in the
buffer at all.
The way we do this is a bit subtle, though: we assign the candidate
character to comment_line_char preemptively, then check if it works, and
return if it does. The subtle part is that sometimes setting
comment_line_char is important (after we return, the important outcome
is the fact that we have set the variable) and sometimes it is useless
(if our optimization fails, we go on to do the more careful checks and
eventually assign something else instead).
To make it more clear what is happening (and to make further refactoring
of comment_line_char easier), let's check our candidate character
directly, and then assign as part of returning if it worked out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various parts of upload-pack has been updated to bound the resource
consumption relative to the size of the repository to protect from
abusive clients.
* jk/upload-pack-bounded-resources:
upload-pack: free tree buffers after parsing
upload-pack: use PARSE_OBJECT_SKIP_HASH_CHECK in more places
upload-pack: always turn off save_commit_buffer
upload-pack: disallow object-info capability by default
upload-pack: accept only a single packfile-uri line
upload-pack: use a strmap for want-ref lines
upload-pack: use oidset for deepen_not list
upload-pack: switch deepen-not list to an oid_array
upload-pack: drop separate v2 "haves" array
A custom remote helper no longer cannot access the newly created
repository during "git clone", which is a regression in Git 2.44.
This has been corrected.
* ps/remote-helper-repo-initialization-fix:
builtin/clone: allow remote helpers to detect repo
"git commit -v --cleanup=scissors" used to add the scissors line
twice in the log message buffer, which has been corrected.
* jt/commit-redundant-scissors-fix:
commit: unify logic to avoid multiple scissors lines when merging
commit: avoid redundant scissor line with --cleanup=scissors -v
"git merge-tree" has learned that the three trees involved in the
3-way merge only need to be trees, not necessarily commits.
* js/merge-tree-3-trees:
fill_tree_descriptor(): mark error message for translation
cache-tree: avoid an unnecessary check
Always check `parse_tree*()`'s return value
t4301: verify that merge-tree fails on missing blob objects
merge-ort: do check `parse_tree()`'s return value
merge-tree: fail with a non-zero exit code on missing tree objects
merge-tree: accept 3 trees as arguments
"git rev-list --missing=print" has learned to optionally take
"--allow-missing-tips", which allows the objects at the starting
points to be missing.
* cc/rev-list-allow-missing-tips:
revision: fix --missing=[print|allow*] for annotated tags
rev-list: allow missing tips with --missing=[print|allow*]
t6022: fix 'test' style and 'even though' typo
oidset: refactor oidset_insert_from_set()
revision: clarify a 'return NULL' in get_reference()
bare in that context is an option, not purely an adjective
Mark it properly
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-branch(1) will error out if you give it a bad ref name. But the user
might not understand why or what part of the name is illegal.
The user might know that there are some limitations based on the *loose
ref* format (filenames), but there are also further rules for
easier integration with shell-based tools, pathname expansion, and
playing well with reference name expressions.
The man page for git-check-ref-format(1) contains these rules. Let’s
advise about it since that is not a command that you just happen
upon. Also make this advise configurable since you might not want to be
reminded every time you make a little typo.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref" learned "--include-root-refs" option to show
even the stuff outside the 'refs/' hierarchy.
* kn/for-all-refs:
for-each-ref: add new option to include root refs
ref-filter: rename 'FILTER_REFS_ALL' to 'FILTER_REFS_REGULAR'
refs: introduce `refs_for_each_include_root_refs()`
refs: extract out `loose_fill_ref_dir_regular_file()`
refs: introduce `is_pseudoref()` and `is_headref()`
Many small allocations "git name-rev" makes have been updated to
allocate from a mem-pool.
* rs/name-rev-with-mempool:
name-rev: use mem_pool_strfmt()
mem-pool: add mem_pool_strfmt()
We clarified how "clean.requireForce" interacts with the "--dry-run"
option in the previous commit, both in the implementation and in the
documentation. Even when "git clean" (without other options) is
required to be used with "--force" (i.e. either clean.requireForce
is unset, or explicitly set to true) to protect end-users from
casual invocation of the command by mistake, "--dry-run" does not
require "--force" to be used, because it is already its own
protection mechanism by being a no-op to the working tree files.
The previous commit, however, missed another clean-up opportunity
around the same area. Just like in the "--dry-run" mode, the
command in the "--interactive" mode does not require "--force",
either. This is because by going interactive and giving the end
user one more chance to confirm, the mode itself is serving as its
own protection mechanism.
Let's take things one step further, and unify the code that defines
interaction between "--force" and these two other options. Just
like we added explanation for the reason why "--dry-run" does not
honor "clean.requireForce", give an explanation for the reason why
"--interactive" makes "clean.requireForce" to be ignored.
Finally, add some tests to show the interaction between "--force"
and "--interactive". We already have tests that show interaction
between "--force" and "--dry-run", but didn't test "--interactive".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What -n actually does in addition to its documented behavior is
ignoring of configuration variable clean.requireForce, that makes
sense provided -n prevents files removal anyway.
So, first, document this in the manual, and then modify implementation
to make this more explicit in the code.
Improved implementation also stops to share single internal variable
'force' between command-line -f option and configuration variable
clean.requireForce, resulting in more clear logic.
Two error messages with slightly different text depending on if
clean.requireForce was explicitly set or not, are merged into a single
one.
The resulting error message now does not mention -n as well, as it
neither matches intended clean.requireForce usage nor reflects
clarified implementation.
Documentation of clean.requireForce is changed accordingly.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git repack" repacks promisor objects, it starts a pack-objects
subprocess and uses xwrite() to send object names over the pipe to
it, but without any error checking. An I/O error or short write
(even though a short write is unlikely for such a small amount of
data) can result in a packfile that lacks certain objects we wanted
to put in there, leading to a silent repository corruption.
Use write_in_full(), instead of xwrite(), to mitigate short write
risks, check errors from it, and abort if we see a failure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two packfile stream consumers, index-pack and
unpack-objects, that allow excess payload after the packfile stream
data. Their code to relay excess data hasn't changed significantly
since their original implementation that appeared in 67e5a5ec
(git-unpack-objects: re-write to read from stdin, 2005-06-28) and
9bee2478 (mimic unpack-objects when --stdin is used with index-pack,
2006-10-25).
These code blocks contain hand-rolled loops using xwrite(), written
before our write_in_full() helper existed. This helper now provides
the same functionality.
Replace these loops with write_in_full() for shorter, clearer
code. Update related variables accordingly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reflog" learned a "list" subcommand that enumerates known reflogs.
* ps/reflog-list:
builtin/reflog: introduce subcommand to list reflogs
refs: stop resolving ref corresponding to reflogs
refs: drop unused params from the reflog iterator callback
refs: always treat iterators as ordered
refs/files: sort merged worktree and common reflogs
refs/files: sort reflogs returned by the reflog iterator
dir-iterator: support iteration in sorted order
dir-iterator: pass name to `prepare_next_entry_data()` directly
This is another preparatory refactor to unify the trailer formatters.
Make format_trailers() also write to a strbuf, to align with
format_trailers_from_commit() which also does the same. Doing this makes
format_trailers() behave similar to format_trailer_info() (which will
soon help us replace one with the other).
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret-trailers.c builtin is the only place we need to call
interpret_trailers(), so move its definition there (together with a few
helper functions called only by it) and remove its external declaration
from <trailer.h>.
Several helper functions that are called by interpret_trailers() remain
in trailer.c because other callers in the same file still call them.
Declare them in <trailer.h> so that interpret_trailers() (now in
builtin/interpret-trailers.c) can continue calling them as a trailer API
user.
This enriches <trailer.h> with a more granular API, which can then be
unit-tested in the future (because interpret_trailers() by itself does
too many things to be able to be easily unit-tested).
Take this opportunity to demote some file-handling functions out of the
trailer API implementation, as these have nothing to do with trailers.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename process_trailers() to interpret_trailers(), because it matches
the name for the builtin command of the same name
(git-interpret-trailers), which is the sole user of process_trailers().
In a following commit, we will move "interpret_trailers" from trailer.c
to builtin/interpret-trailers.c. That move will necessitate the growth
of the trailer.h API, forcing us to expose some additional functions in
trailer.h.
Rename relevant functions so that they include the term "trailer" in
their name, so that clients of the API will be able to easily identify
them by their "trailer" moniker, just like all the other functions
already exposed by trailer.h.
Rename `struct list_head *head` to `struct list_head *trailers` because
"head" conveys no additional information beyond the "list_head" type.
Reorder parameters for format_trailers_from_commit() to prefer
const struct process_trailer_options *opts
as the first parameter, because these options are intimately tied to
formatting trailers. Parameters like `FILE *outfile` should be last
because they are a kind of 'out' parameter, so put such parameters at
the end. This will be the pattern going forward in this series.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'refresh' function in 'builtin/add.c' declares 'flags' as
signed, and passes it as an argument to the 'refresh_index'
function, which though expects an unsigned value.
Since in this case 'flags' represents a bag of bits, whose MSB is
not used in special ways, change the type of 'flags' to unsigned.
Signed-off-by: Eugenio Gigante <giganteeugenio2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(Actually, this commit is only about passing on "missing commits"
errors, but adding that to the commit's title would have made it too
long.)
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases_many_dirty()` function is
aware of that, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases_many()` function is aware of
that, too.
Naturally, there are a lot of callers that need to be adjusted now, too.
Next stop: `repo_get_merge_bases_dirty()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases()` function (which is also
surfaced via the `get_merge_bases()` macro) is aware of that, too.
Naturally, the callers need to be adjusted now, too.
Next step: adjust `repo_get_merge_bases_many()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases()` function (which is also
surfaced via the `repo_get_merge_bases()` macro) is aware of that, too.
Naturally, there are a lot of callers that need to be adjusted now, too.
Next step: adjust the callers of `get_octopus_merge_bases()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the client sends us "want $oid" lines, we call parse_object($oid)
to get an object struct. It's important to parse the commits because we
need to traverse them in the negotiation phase. But of course we don't
need to hold on to the commit messages for each one.
We've turned off the save_commit_buffer flag in get_common_commits() for
a long time, since f0243f26f6 (git-upload-pack: More efficient usage of
the has_sha1 array, 2005-10-28). That helps with the commits we see
while actually traversing. But:
1. That function is only used by the v0 protocol. I think the v2
protocol's code path leaves the flag on (and thus pays the extra
memory penalty), though I didn't measure it specifically.
2. If the client sends us a bunch of "want" lines, that happens before
the negotiation phase. So we'll hold on to all of those commit
messages. Generally the number of "want" lines scales with the
refs, not with the number of objects in the repo. But a malicious
client could send a lot in order to waste memory.
As an example of (2), if I generate a request to fetch all commits in
git.git like this:
pktline() {
local msg="$*"
printf "%04x%s\n" $((1+4+${#msg})) "$msg"
}
want_commits() {
pktline command=fetch
printf 0001
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
while read oid type; do
test "$type" = "commit" || continue
pktline want $oid
done
pktline done
printf 0000
}
want_commits | GIT_PROTOCOL=version=2 valgrind --tool=massif git-upload-pack . >/dev/null
before this patch upload-pack peaks at ~125MB, and after at ~35MB. The
difference is not coincidentally about the same as the sum of all commit
object sizes as computed by:
git cat-file --batch-all-objects --batch-check='%(objecttype) %(objectsize)' |
perl -alne '$v += $F[1] if $F[0] eq "commit"; END { print $v }'
In a larger repository like linux.git, that number is ~1GB.
In a repository with a full commit-graph file this will have no impact
(and the commit graph would save us from parsing at all, so is a much
better solution!). But it's easy to do, might help a little in
real-world cases (where even if you have a commit graph it might not be
fully up to date), and helps a lot for a worst-case malicious request.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions in Git's source code follow the convention that returning
a negative value indicates a fatal error, e.g. repository corruption.
Let's use this convention in `repo_in_merge_bases()` to report when one
of the specified commits is missing (i.e. when `repo_parse_commit()`
reports an error).
Also adjust the callers of `repo_in_merge_bases()` to handle such
negative return values.
Note: As of this patch, errors are returned only if any of the specified
merge heads is missing. Over the course of the next patches, missing
commits will also be reported by the `paint_down_to_common()` function,
which is called by `repo_in_merge_bases_many()`, and those errors will
be properly propagated back to the caller at that stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag --column" failed to check the exit status of its "git
column" invocation, which has been corrected.
* rj/tag-column-fix:
tag: error when git-column fails
In 18c9cb7524 (builtin/clone: create the refdb with the correct object
format, 2023-12-12), we have changed git-clone(1) so that it delays
creation of the refdb until after it has learned about the remote's
object format. This change was required for the reftable backend, which
encodes the object format into the tables. So if we pre-initialized the
refdb with the default object format, but the remote uses a different
object format than that, then the resulting tables would have encoded
the wrong object format.
This change unfortunately breaks remote helpers which try to access the
repository that is about to be created. Because the refdb has not yet
been initialized at the point where we spawn the remote helper, we also
don't yet have "HEAD" or "refs/". Consequently, any Git commands ran by
the remote helper which try to access the repository would fail because
it cannot be discovered.
This is essentially a chicken-and-egg problem: we cannot initialize the
refdb because we don't know about the object format. But we cannot learn
about the object format because the remote helper may be unable to
access the partially-initialized repository.
Ideally, we would address this issue via capabilities. But the remote
helper protocol is not structured in a way that guarantees that the
capability announcement happens before the remote helper tries to access
the repository.
Instead, fix this issue by partially initializing the refdb up to the
point where it becomes discoverable by Git commands.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting this environment variable causes the sequencer to display a
custom message when it stops for the user to resolve conflicts and
remove CHERRY_PICK_HEAD. Setting it in "git rebase" is a vestige of
the scripted implementation, now that it is a builtin command we do
not need to communicate with the sequencer machinery via environment
variables.
Move the conflicts advice to use when rebasing into
sequencer.c so we do not need to pass it via the environment.
Note that we retain the changes in e4301f73ff (sequencer: unset
GIT_CHERRY_PICK_HELP for 'exec' commands, 2024-02-02) just in case
GIT_CHERRY_PICK_HELP is set in the environment when "git rebase" is
run.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_commit has some logic to figure out whether merge already
added a scissors line, and therefore it shouldn't add another. Now that
wt_status_add_cut_line has built-in state for whether it has
already added a previous line, just set that state instead, and then
remove that condition from subsequent calls to wt_status_add_cut_line.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git commit --cleanup=scissors -v` prints two scissors lines:
one at the start of the comment lines, and the other right before the
diff. This is redundant, and pushes the diff further down in the user's
editor than it needs to be.
Make wt_status_add_cut_line() remember if it has added a cut line before,
and avoid adding a redundant one.
Add a test for this.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git checkout -p" and friends that "@" is a synonym for
"HEAD".
* gt/at-is-synonym-for-head-in-add-patch:
add -p tests: remove PERL prerequisites
add-patch: classify '@' as a synonym for 'HEAD'
"git column" has been taught to reject negative padding value, as
it would lead to nonsense behaviour including division by zero.
* kh/column-reject-negative-padding:
column: guard against negative padding
column: disallow negative padding
1c56fc2084 (name-rev: pre-size buffer in get_parent_name(), 2020-02-04)
got a big performance boost in an unusual repository by calculating the
name length in advance. This is a bit awkward, as it references the
name components twice.
Use a memory pool to store the strings for the struct rev_name member
tip_name. Using mem_pool_strfmt() allows efficient allocation without
explicit size calculation. This simplifies the formatting part of the
code without giving up performance:
Benchmark 1: ./git_2.44.0 -C ../chromium/src name-rev --all
Time (mean ± σ): 1.231 s ± 0.013 s [User: 1.082 s, System: 0.136 s]
Range (min … max): 1.214 s … 1.252 s 10 runs
Benchmark 2: ./git -C ../chromium/src name-rev --all
Time (mean ± σ): 1.220 s ± 0.020 s [User: 1.083 s, System: 0.130 s]
Range (min … max): 1.197 s … 1.254 s 10 runs
Don't bother discarding the memory pool just before exiting. The effort
for that would be very low, but actually measurable in the above
example, with no benefit to users. At least UNLEAK it to calm down leak
checkers. This addresses the leaks that 45a14f578e (Revert "name-rev:
release unused name strings", 2022-04-22) brought back.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using strncmp() and strlen() to check whether a string starts with
another one requires repeating the prefix candidate. Use starts_with()
instead, which reduces repetition and is more readable.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-for-each-ref(1) command doesn't provide a way to print root refs
i.e pseudorefs and HEAD with the regular "refs/" prefixed refs.
This commit adds a new option "--include-root-refs" to
git-for-each-ref(1). When used this would also print pseudorefs and HEAD
for the current worktree.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag 'FILTER_REFS_ALL' is a bit ambiguous, where ALL doesn't specify
if it means to contain refs from all worktrees or whether all types of
refs (regular, HEAD & pseudorefs) or all of the above.
Since here it is actually referring to all refs with the "refs/" prefix,
let's rename it to 'FILTER_REFS_REGULAR' to indicate that this is
specifically for regular refs.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may easily run into serious crashes: For example, if we run
`init_tree_desc()` directly after a failed `parse_tree()`, we are
accessing uninitialized data or trying to dereference `NULL`.
Note that the `parse_tree()` function already takes care of showing an
error message. The `parse_tree_indirectly()` and
`repo_get_commit_tree()` functions do not, therefore those latter call
sites need to show a useful error message while the former do not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the git-reflog(1) command has subcommands to show reflog entries
or check for reflog existence, it does not have any subcommands that
would allow the user to enumerate all existing reflogs. This makes it
quite hard to discover which reflogs a repository has. While this can
be worked around with the "files" backend by enumerating files in the
".git/logs" directory, users of the "reftable" backend don't enjoy such
a luxury.
Introduce a new subcommand `git reflog list` that lists all reflogs the
repository knows of to fill this gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref and reflog iterators share much of the same underlying code to
iterate over the corresponding entries. This results in some weird code
because the reflog iterator also exposes an object ID as well as a flag
to the callback function. Neither of these fields do refer to the reflog
though -- they refer to the corresponding ref with the same name. This
is quite misleading. In practice at least the object ID cannot really be
implemented in any other way as a reflog does not have a specific object
ID in the first place. This is further stressed by the fact that none of
the callbacks except for our test helper make use of these fields.
Split up the infrastucture so that ref and reflog iterators use separate
callback signatures. This allows us to drop the nonsensical fields from
the reflog iterator.
Note that internally, the backends still use the same shared infra to
iterate over both types. As the backends should never end up being
called directly anyway, this is not much of a problem and thus kept
as-is for simplicity's sake.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you run `git rebase --continue` when no rebase is in progress, git
outputs `fatal: No rebase in progress?` which is not a question but a
statement. Make it appear as a statement, and use lowercase to align
with error message style.
Signed-off-by: Harmen Stoppels <me@harmenstoppels.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths that call repo_read_object_file() have been
tightened to react to errors.
* js/check-null-from-read-object-file:
Always check the return value of `repo_read_object_file()`
Code simplification.
* rs/receive-pack-remove-find-header:
receive-pack: use find_commit_header() in check_nonce()
receive-pack: use find_commit_header() in check_cert_push_options()
If the user asks for the list of tags to be displayed in columns
("--columns"), a child git-column process is used to format the output
as expected.
In a rare situation where we encounter a problem spawning that child
process, we will work erroneously.
Make noticeable we're having a problem executing git-column, so the user
can act accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9830926c7d (rev-list: add commit object support in `--missing`
option, 2023-10-27) we fixed the `--missing` option in `git rev-list`
so that it works with with missing commits, not just blobs/trees.
Unfortunately, such a command would still fail with a "fatal: bad
object <oid>" if it is passed a missing commit, blob or tree as an
argument (before the rev walking even begins).
When such a command is used to find the dependencies of some objects,
for example the dependencies of quarantined objects (see the
"QUARANTINE ENVIRONMENT" section in the git-receive-pack(1)
documentation), it would be better if the command would instead
consider such missing objects, especially commits, in the same way as
other missing objects.
If, for example `--missing=print` is used, it would be nice for some
use cases if the missing tips passed as arguments were reported in
the same way as other missing objects instead of the command just
failing.
We could introduce a new option to make it work like this, but most
users are likely to prefer the command to have this behavior as the
default one. Introducing a new option would require another dumb loop
to look for that option early, which isn't nice.
Also we made `git rev-list` work with missing commits very recently
and the command is most often passed commits as arguments. So let's
consider this as a bug fix related to these recent changes.
While at it let's add a NEEDSWORK comment to say that we should get
rid of the existing ugly dumb loops that parse the
`--exclude-promisor-objects` and `--missing=...` options early.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" sometimes was silent even when it failed due to
unwritable index file, which has been corrected.
* ps/report-failure-from-git-stash:
builtin/stash: report failure to write to index
A failed "git tag -s" did not necessarily result in an error
depending on the crypto backend, which has been corrected.
* jc/sign-buffer-failure-propagation-fix:
ssh signing: signal an error with a negative return value
tag: fix sign_buffer() call to create a signed tag
Update to a new feature recently added, "git show-ref --exists".
* tc/show-ref-exists-fix:
builtin/show-ref: treat directory as non-existing in --exists