The command line completion script (in contrib/) tried to complete
"git stash -p" as if it were "git stash push -p", but it was too
aggressive and also affected "git stash show -p", which has been
corrected.
* vs/complete-stash-show-p-fix:
completion: don't override given stash subcommand with -p
The --orphan option is used to create a local branch which is detached
from the current history. In git switch, it always resets to the empty
tree, and thus the only completion we can provide is a branch name.
Follow the same rules for -c/-C (and -b/-B) when completing the argument
to --orphan.
In the case of git switch, after we complete the argument, there is
nothing more we can complete for git switch, so do not even try. Nothing
else would be valid.
In the case of git checkout, --orphan takes a start point which it uses
to determine the checked out tree, even though it created orphaned
history.
Update the previously added test cases as they are now passing.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit added several test cases highlighting the subpar
completion logic for -c/-C and -b/-B when completing git switch and git
checkout.
In order to distinguish completing the argument vs the start-point for
this option, we now use the wordlist to determine the previous full word
on the command line.
If it's -c or -C (-b/-B for checkout), then we know that we are
completing the argument for the branch name.
Given that a user who already knows the branch name they want to
complete will simply not use completion, it makes sense to complete the
small subset of local branches when completing the argument for -c/-C.
In all other cases, if -c/-C are on the command line but are not the
most recent option, then we must be completing a start-point, and should
allow completing against all references.
Update the -c/-C and -b/-B tests to indicate they now pass.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current completion for the --track option of git switch and git checkout
is sub par. In addition to the DWIM logic of a bare branch name, --track
has DWIM logic to convert specified remote/branch names into a local
branch tracking that remote. For example
$git switch --track origin/master
This will create a local branch name master, that tracks the master
branch of the origin remote.
In fact, git switch --track on its own will not accept other forms of
references. These must instead be specified manually via the -c/-C/-b/-B
options.
Introduce __git_remote_heads() and the "remote-heads" mode for
__git_complete_refs. Use this when the --track option is provided while
completing in _git_switch and _git_checkout. Just as in the --detach
case, we never enable DWIM mode for --track, because it doesn't make
sense.
It should be noted that completion support is still a bit sub par when
it comes to handling -c/-C and --orphan. This will be resolved in
a future change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git switch, we should not complete DWIM remote branch names
if --detach has been specified. To avoid this, refactor _git_checkout in
a similar way to _git_switch.
Note that we don't simply clear dwim_opt when we find -d or --detach, as
we will be adding other modes and checks, making this flow easier to
follow.
Update the previously failing tests to show that the breakage has been
resolved.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new --mode option to __git_complete_refs, which allows changing
the behavior to call __git_heads instead of __git_refs.
By passing --mode=heads, __git_complete_refs will only output local
branches. This enables using "--mode=heads --dwim" to enable listing
local branches and the remote unique branch names for DWIM.
Refactor completion support to use the new mode option, rather than
calling __git_heads directly. This has the advantage that we can now
correctly allow local branches along with suitable DWIM refs, rather
than only allowing DWIM when we complete all references.
Choose what mode it uses when calling __git_complete_refs. If -d or
--detach have been provided, then simply complete all refs, but
*without* the DWIM option as these DWIM names won't work properly in
--detach mode.
Otherwise, call __git_complete_refs with the default dwim_opt value and
use the new "heads" mode.
In this way, the basic support for completing just "git switch <TAB>"
will result in only local branches and remote unique names for DWIM.
The basic no-options tests for git switch, as well as several of the
-c/-C tests now pass, so remove the known breakage tags.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper, __git_find_last_on_cmdline is introduced, similar to the
already existing __git_find_on_cmdline, but which operates in reverse,
finding the *last* matching word of the provided wordlist.
Use this in a new __git_checkout_default_dwim_mode() function that will
determine when to enable listing of DWIM remote branches.
The __git_find_last_on_cmdline() function is used to determine which
--guess or --no-guess is in effect. If either one is provided, then we
unconditionally enable or disable the DWIM mode based on the last
provided option.
If neither --guess nor --no-guess is provided, then we check for
--no-track, and finally for GIT_COMPLETION_CHECKOUT_NO_GUESS=1.
This function is then used in _git_switch and _git_checkout to improve
the handling for when we enable listing of these DWIM remote branches.
This new logic is more robust, as we will correctly identify superseded
options, and ensure that both _git_switch and _git_checkout enable DWIM
in similar ways.
We can now update a few tests to indicate they pass. A few of the tests
previously added to highlight issues with the old DWIM logic still fail.
This is because of a separate issue related to the default completion
behavior of git switch, which will be addressed in a future change.
Additionally, due to this change, a few tests for the -b/-B handling of
git checkout now fail. This is a minor regression, and will be fixed by
a following change that improves the overall handling of -b/-B. Mark
these tests as known breakages for now.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_complete_refs is the main function used for completing references.
It is primarily used as a wrapper around __git_refs, and is easier to
extend since its arguments are option-like.
One major downside of __git_complete_refs and __git_refs currently, is
the lack of ability to complete only a subset of refs such as branches
(refs/heads) or tags (refs/tags).
Normally, a caller might just decide to use __git_heads() or
__git_tags(). However, in the case of git-switch, it is useful to
complete both branches *and* DWIM remote branch names.
Due to the complexity and implementation of __git_refs, it is not easy
to extend it to support listing only a subset of references.
Instead, we can extend __git_complete_refs to do this. For this to be
done, we must first ensure that "--dwim" support is not tied to calling
__git_refs.
Instead of passing $dwim into __git_refs, we can implement
a __gitcomp_direct_append function which can append to COMPREPLY after
a call to __gitcomp_direct.
If --dwim is passed to __git_complete_refs, use __gitcomp_direct_append
to add the output of __git_dwim_remote_heads to the completion list.
In this way, --dwim support is now independent of calling __git_refs.
A future change will add an additional option to control what set of
references __git_complete_refs will output.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs() has the ability to report unique remote names for
supporting completion of remote branch names for the DWIMery of git
checkout and git switch.
For git checkout, this is fine, because it always supports completing
all local references.
However, git switch by default only supports either switching branches
or using this DWIMery to create a local branch tracking the remote
branch.
Future work to cleanup and improve completion support for git switch
will be aided if the remote branch names can be completed separately
from __git_refs.
Extract this logic to a function __git_dwim_remote_heads(), and use it
in __git_refs.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_complete_refs uses the "--track" option to specify when to
enable listing of unique remote branches which are used by the DWIM
logic of git checkout and git switch.
Using the term '--track' here is confusing because the git commands
themselves have '--track' as an argument. Additionally, the completion
logic for _git_switch also checks for --track. Keeping the meaning of
track_opt and --track for __git_complete_refs straight from the --track
git switch and git checkout option is difficult when reading this code.
Use the option '--dwim' instead, indicating this is about enabling or
disabling logic related to DWIM mode. Also rename the local variable
track_opt to dwim_opt to further reduce the confusion when reading the
completion code for _git_switch.
Because it is plausible for users to have developed their own
completions which rely on __git_complete_ref, keep --track as a synonym
for --dwim, even though we no longer use it in any of the core git
completion logic. Add a comment explaining why it remains as an
alternative spelling for --dwim.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When clearing the builtin operations on re-sourcing in the ZSH case we
can use the native ${parameters} associative array keys values to get
the currently `__gitcomp_builtin_*` operations using pattern matching
instead of using sed.
As also stated in commit 94408dc7, introducing this change the usage of
sed has some overhead implications, while ZSH can do this check just
using its native syntax.
Signed-off-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df70b190 (completion: make stash -p and alias for stash push -p,
2018-04-20) wanted to make sure "git stash -p <TAB>" offers the same
completion as "git stash push -p <TAB>", but it did so by forcing the
$subcommand to be "push" whenever then "-p" option is found on the
command line.
This harms any subcommand that can take the "-p" option---even when the
subcommand is explicitly given, e.g. "git stash show -p", the code added
by the change would overwrite the $subcommand the user gave us.
Fix it by making sure that the defaulting to "push" happens only when
there is no $subcommand given yet.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The directory traversal code had redundant recursive calls which
made its performance characteristics exponential with respect to
the depth of the tree, which was corrected.
* en/fill-directory-exponential:
completion: fix 'git add' on paths under an untracked directory
Fix error-prone fill_directory() API; make it only return matches
dir: replace double pathspec matching with single in treat_directory()
dir: include DIR_KEEP_UNTRACKED_CONTENTS handling in treat_directory()
dir: replace exponential algorithm with a linear one
dir: refactor treat_directory to clarify control flow
dir: fix confusion based on variable tense
dir: fix broken comment
dir: consolidate treat_path() and treat_one_path()
dir: fix simple typo in comment
t3000: add more testcases testing a variety of ls-files issues
t7063: more thorough status checking
Add missing 'restore' and 'switch' sub commands to zsh completion
candidate output. E.g.
$ git re<tab>
rebase -- forward-port local commits to the updated upstream head
reset -- reset current HEAD to the specified state
restore -- restore working tree files
$ git s<tab>
show -- show various types of objects
status -- show the working tree status
switch -- switch branches
Signed-off-by: Terry Moschou <tmoschou@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a (late) companion for f6461b82b9 (Documentation: fix build
with Asciidoctor 2, 2019-09-15).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported on the git mailing list, since git-2.25,
git add untracked-dir/
has been tab completing to
git add untracked-dir/./
The cause for this was that with commit b9670c1f5e (dir: fix checks on
common prefix directory, 2019-12-19),
git ls-files -o --directory untracked-dir/
(or the equivalent `git -C untracked-dir ls-files -o --directory`) began
reporting
untracked-dir/
instead of listing paths underneath that directory. It may also be
worth noting that the real command in question was
git -C untracked-dir ls-files -o --directory '*'
which is equivalent to
git ls-files -o --directory 'untracked-dir/*'
which behaves the same for the purposes of this issue (the '*' can match
the empty string), but becomes relevant for the proposed fix.
At first, based on the report, I decided to try to view this as a
regression and tried to find a way to recover the old behavior without
breaking other stuff, or at least breaking as little as possible.
However, in the end, I couldn't figure out a way to do it that wouldn't
just cause lots more problems than it solved. The old behavior was a
bug:
* Although older git would avoid cleaning anything with `git clean -f
.git`, it would wipe out everything under that direcotry with `git
clean -f .git/`. Despite the difference in command used, this is
relevant because the exact same change that fixed clean changed the
behavior of ls-files.
* Older git would report different results based solely on presence or
absence of a trailing slash for $SUBDIR in the command `git ls-files
-o --directory $SUBDIR`.
* Older git violated the documented behavior of not recursing into
directories that matched the pathspec when --directory was
specified.
* And, after all, commit b9670c1f5e (dir: fix checks on common prefix
directory, 2019-12-19) didn't overlook this issue; it explicitly
stated that the behavior of the command was being changed to bring
it inline with the docs.
(Also, if it helps, despite that commit being merged during the 2.25
series, this bug was not reported during the 2.25 cycle, nor even during
most of the 2.26 cycle -- it was reported a day before 2.26 was
released. So the impact of the change is at least somewhat small.)
Instead of relying on a bug of ls-files in reporting the wrong content,
change the invocation of ls-files used by git-completion to make it grab
paths one depth deeper. Do this by changing '$DIR/*' (match $DIR/ plus
0 or more characters) into '$DIR/?*' (match $DIR/ plus 1 or more
characters). Note that the '?' character should not be added when
trying to complete a filename (e.g. 'git ls-files -o --directory
"merge.c?*"' would not correctly return "merge.c" when such a file
exists), so we have to make sure to add the '?' character only in cases
where the path specified so far is a directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tar importer in `contrib/fast-import/import-tars.perl` has a very
convenient feature: if _all_ paths stored in the imported `.tar` start
with a common prefix, e.g. `git-2.26.0/` in the tar at
https://github.com/git/git/archive/v2.26.0.tar.gz, then this prefix is
stripped.
This feature makes a ton of sense because it is relatively common to
import two or more revisions of the same project into Git, and obviously
we don't want all files to live in a tree whose name changes from
revision to revision.
Now, the problem with that feature is that it breaks down if there is a
`pax_global_header` "file" located outside of said prefix, at the top of
the tree. This is the case for `.tar` files generated by Git's very own
`git archive` command: it inserts that header, and `git archive` allows
specifying a common prefix (that the header does _not_ share with the
other files contained in the archive) via `--prefix=my-project-1.0.0/`.
Let's just skip any global header when importing `.tar` files into Git.
Note: this global header might contain useful information. For example,
in the output of `git archive`, it lists the original commit, which _is_
useful information. A future improvement to the `import-tars.perl`
script might be to include that information in the commit message, or do
other things with the information (e.g. use `mtime` information
contained in the global header as date of the commit). This patch does
not prevent any future patch from making that happen, it only prevents
the header from being treated as if it was a regular file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am --short-current-patch" is a way to show the piece of e-mail
for the stopped step, which is not suitable to directly feed "git
apply" (it is designed to be a good "git am" input). It learned a
new option to show only the patch part.
* pb/am-show-current-patch:
am: support --show-current-patch=diff to retrieve .git/rebase-apply/patch
am: support --show-current-patch=raw as a synonym for--show-current-patch
am: convert "resume" variable to a struct
parse-options: convert "command mode" to a flag
parse-options: add testcases for OPT_CMDMODE()
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
These options are available since git v2.15, but somehow
eluded from the completion script.
Note that while --color-moved-ws= accepts comma-separated
list of values, there is no (easy?) way to make it work
with completion (see e.g. [1]).
[1]: https://github.com/scop/bash-completion/issues/240
Acked-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the past, we had different prompts for different types of rebases:
REBASE: for am-based rebases
REBASE-m: for merge-based rebases
REBASE-i: for interactive-based rebases
It's not clear why this distinction was necessary or helpful; when the
prompt was added in commit e75201963f ("Improve bash prompt to detect
various states like an unfinished merge", 2007-09-30), it simply added
these three different types. Perhaps there was a useful purpose back
then, but there have been some changes:
* The merge backend was deleted after being implemented on top of the
interactive backend, causing the prompt for merge-based rebases to
change from REBASE-m to REBASE-i.
* The interactive backend is used for multiple different types of
non-interactive rebases, so the "-i" part of the prompt doesn't
really mean what it used to.
* Rebase backends have gained more abilities and have a great deal of
overlap, sometimes making it hard to distinguish them.
* Behavioral differences between the backends have also been ironed
out.
* We want to change the default backend from am to interactive, which
means people would get "REBASE-i" by default if we didn't change
the prompt, and only if they specified --am or --whitespace or -C
would they get the "REBASE" prompt.
* In the future, we plan to have "--whitespace", "-C", and even "--am"
run the interactive backend once it can handle everything the
am-backend can.
For all these reasons, make the prompt for any type of rebase just be
"REBASE".
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) learned to complete
subcommands and arguments to "git worktree".
* sg/completion-worktree:
completion: list paths and refs for 'git worktree add'
completion: list existing working trees for 'git worktree' subcommands
completion: simplify completing 'git worktree' subcommands and options
completion: return the index of found word from __git_find_on_cmdline()
completion: clean up the __git_find_on_cmdline() helper function
t9902-completion: add tests for the __git_find_on_cmdline() helper
Sample credential helper for using .netrc has been updated to work
out of the box.
* dl/credential-netrc:
contrib/credential/netrc: work outside a repo
contrib/credential/netrc: make PERL_PATH configurable
With the upgrade, the library names changed from libeay32/ssleay32 to
libcrypto/libssl.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete paths after 'git worktree add <TAB>' and refs after 'git
worktree add -b <TAB>' and 'git worktree add some/dir <TAB>'.
Uncharacteristically for a Git command, 'git worktree add' takes a
mandatory path parameter before a commit-ish as its optional last
parameter. In addition, it has both standalone --options and options
with a mandatory unstuck parameter ('-b <new-branch>'). Consequently,
trying to complete refs for that last optional commit-ish parameter
resulted in a more convoluted than usual completion function, but
hopefully all the included comments will make it not too hard to
digest.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete the paths of existing working trees for 'git worktree's
'move', 'remove', 'lock', and 'unlock' subcommands.
Note that 'git worktree list --porcelain' shows absolute paths, so for
simplicity's sake we'll complete full absolute paths as well (as
opposed to turning them into relative paths by finding common leading
directories between $PWD and the working tree's path and removing
them, risking trouble with symbolic links or Windows drive letters; or
completing them one path component at a time).
Never list the path of the main working tree, as it cannot be moved,
removed, locked, or unlocked.
Ideally we would only list unlocked working trees for the 'move',
'remove', and 'lock' subcommands, and only locked ones for 'unlock'.
Alas, 'git worktree list --porcelain' doesn't indicate which working
trees are locked, so for now we'll complete the paths of all existing
working trees.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion function for 'git worktree' uses separate but very
similar case arms to complete --options for each subcommand.
Combine these into a single case arm to avoid repetition.
Note that after this change we won't complete 'git worktree remove's
'--force' option, but that is consistent with our general stance on
not offering '--force', as it should be used with care.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the __git_find_on_cmdline() helper function so far we've
only been interested in which one of a set of words appear on the
command line. To complete options for some of 'git worktree's
subcommands in the following patches we'll need not only that, but the
index of that word on the command line as well.
Extend __git_find_on_cmdline() to optionally show the index of the
found word on the command line (IOW in the $words array) when the
'--show-idx' option is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_find_on_cmdline() helper function started its life as
__git_find_subcommand() [1], but it served a more general purpose than
looking for subcommands, so later it was renamed accordingly [2].
However, that rename didn't touch the body of the function, and left
the $subcommand local variable behind, still reminiscent of the
function's original purpose.
Let's clean up the names of __git_find_on_cmdline()'s local variables
and get rid of that $subcommand variable name.
While at it, add a short comment describing the function's purpose.
[1] 3ff1320d4b (bash: refactor searching for subcommands on the
command line, 2008-03-10),
[2] 918c03c2a7 (bash: rename __git_find_subcommand() to
__git_find_on_cmdline(), 2009-09-15)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git-credential-netrc does not work outside of a git
repository. It fails with the following error:
fatal: Not a git repository: . at /usr/share/perl5/Git.pm line 214.
There is no real reason why need to be within a repository, though.
Credential helpers should be able to work just fine outside the
repository as well.
Call the non-self version of config() so that git-credential-netrc no
longer needs to be run within a repository.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shebang path for the Perl interpreter in git-credential-netrc was
hardcoded. However, some users may have it located at a different
location and thus, would have had to manually edit the script.
Add a .perl prefix to the script to denote it as a template and ignore
the generated version. Augment the Makefile so that it generates
git-credential-netrc from git-credential-netrc.perl, just like other
Perl scripts.
The Makefile recipes were shamelessly stolen from
contrib/mw-to-git/Makefile.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
The completion script (in contrib/) has been taught that "git svn"
supports the "--recursive" option.
* js/complete-svn-recursive:
completion: tab-complete "git svn --recursive"
The completion script (in contrib/) learned that the "--onto"
option of "git rebase" can take its argument as the value of the
option.
* dl/complete-rebase-onto:
completion: learn to complete `git rebase --onto=`
The standard format for referencing other commits within some projects
(such as git.git) is the reference format. This is described in
Documentation/SubmittingPatches as
If you want to reference a previous commit in the history of a stable
branch, use the format "abbreviated hash (subject, date)", like this:
....
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that ...
....
Since this format is so commonly used, standardize it as a pretty
format.
The tests that are implemented essentially show that the format-string
does not change in response to various log options. This is useful
because, for future developers, it shows that we've considered the
limitations of the "canned format-string" approach and we are fine with
them.
Based-on-a-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
