"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit
65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use FLEX_ALLOC_STR() to allocate the `struct untracked_cache_dir`
for the root directory. Get rid of unsafe code that might fail to
initialize the `name` field (if FLEX_ARRAY is not 1). This will
make it clear that we intend to have a structure with an empty
string following it.
A problem was observed on Windows where the length of the memset() was
too short, so the first byte of the name field was not zeroed. This
resulted in the name field having garbage from a previous use of that
area of memory.
The record for the root directory was then written to the untracked-cache
extension in the index. This garbage would then be visible to future
commands when they reloaded the untracked-cache extension.
Since the directory record for the root directory had garbage in the
`name` field, the `t/helper/test-tool dump-untracked-cache` tool
printed this garbage as the path prefix (rather than '/') for each
directory in the untracked cache as it recursed.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with .gitattributes, we would like to make sure that .gitignore files
are handled consistently whether read from the index or from the
filesystem. Likewise, we would like to avoid reading out-of-tree files
pointed to by the symlinks, which could have security implications in
certain setups.
We can cover both by using open_nofollow() when opening the in-tree
files. We'll continue to follow links for core.excludesFile, as well as
$GIT_DIR/info/exclude.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of callers of add_patterns() and its sibling
functions. Let's give them a "flags" parameter for adding new options
without having to touch each caller. We'll use this in a future patch to
add O_NOFOLLOW support. But for now each caller just passes 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't use the untracked_cache_dir parameter that is passed in, but
instead look at the untracked_cache_dir inside the cached_dir struct we
are passed. It's been this way since the introduction of
treat_path_fast() in 91a2288b5f (untracked cache: record/validate dir
mtime and reuse cached output, 2015-03-08).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
"ls-files -o" mishandled the top-level directory of another git
working tree that hangs in the current git working tree.
* en/dir-nonbare-embedded:
dir: avoid prematurely marking nonbare repositories as matches
t3000: fix some test description typos
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The calling convention for the dir API is supposed to end with a call to
clear_directory() to free up no longer needed memory. However,
clear_directory() didn't free dir->entries or dir->ignored. I believe
this was an oversight, but a number of callers noticed memory leaks and
started free'ing these. Unfortunately, they did so somewhat haphazardly
(sometimes freeing the entries in the arrays, and sometimes only
free'ing the arrays themselves). This suggests the callers weren't
trying to make sure any possible memory used might be free'd, but just
the memory they noticed their usecase definitely had allocated.
Fix this mess by moving all the duplicated free'ing logic into
clear_directory(). End by resetting dir to a pristine state so it could
be reused if desired.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 96cc8ab531 (sparse-checkout: use hashmaps for cone patterns,
2019-11-21) added some auxiliary hashmaps to the pattern_list struct,
but they're leaked when clear_pattern_list() is called.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nonbare repositories are special directories. Unlike normal directories
that we might recurse into to list the files they contain, nonbare
repositories must themselves match and then we always report only on the
nonbare repository directory itself and not on any of its contents.
Separately, when traversing directories to try to find untracked or
excluded files, we often think in terms of paths either matching the
specified pathspec, or not matching them. However, there is a special
value that do_match_pathspec() uses named
MATCHED_RECURSIVELY_LEADING_PATHSPEC which means "this directory does
not match any pathspec BUT it is possible a file or directory underneath
it does." That special value prevents us from prematurely thinking that
some directory and everything under it is irrelevant, but also allows us
to differentiate from "this is a match".
The combination of these two special cases was previously uncovered.
Add a test to the testsuite to cover it, and make sure that we return a
nonbare repository as a non-match if the best match it got was
MATCHED_RECURSIVELY_LEADING_PATHSPEC.
Reported-by: christian w <usebees@gmail.com>
Simplified-testcase-and-bisection-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 95c11ecc73 ("Fix error-prone fill_directory() API; make it only
return matches", 2020-04-01), we taught `fill_directory()`, or more
specifically `treat_path()`, to check against any pathspecs so that we
could simplify the callers.
But in doing so, we added a slightly-too-early return for the "excluded"
case. We end up not checking the pathspecs, meaning we return
`path_excluded` when maybe we should return `path_none`. As a result,
`git status --ignored -- pathspec` might show paths that don't actually
match "pathspec".
Move the "excluded" check down to after we've checked any pathspecs.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up of "git clean" resulted in a fix of recent
performance regression.
* en/clean-cleanups:
clean: optimize and document cases where we recurse into subdirectories
clean: consolidate handling of ignored parameters
dir, clean: avoid disallowed behavior
dir: fix a few confusing comments
Use of negative pathspec, while collecting paths including
untracked ones in the working tree, was broken.
* en/do-match-pathspec-fix:
dir: fix treatment of negated pathspecs
dir.h documented quite clearly that DIR_SHOW_IGNORED and
DIR_SHOW_IGNORED_TOO are mutually exclusive, with a big comment to this
effect by the definition of both enum values. However, a command like
git clean -fx $DIR
would set both values for dir.flags. I _think_ it happened to work
because:
* As dir.h points out, DIR_KEEP_UNTRACKED_CONTENTS only takes effect
if DIR_SHOW_IGNORED_TOO is set.
* As coded, I believe DIR_SHOW_IGNORED would just happen to take
precedence over DIR_SHOW_IGNORED_TOO in the code as currently
constructed.
Which is a long way of saying "we just got lucky".
Fix clean.c to avoid setting these mutually exclusive values at the same
time, and add a check to dir.c that will throw a BUG() to prevent anyone
else from making this mistake.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
do_match_pathspec() started life as match_pathspec_depth_1() and for
correctness was only supposed to be called from match_pathspec_depth().
match_pathspec_depth() was later renamed to match_pathspec(), so the
invariant we expect today is that do_match_pathspec() has no direct
callers outside of match_pathspec().
Unfortunately, this intention was lost with the renames of the two
functions, and additional calls to do_match_pathspec() were added in
commits 75a6315f74 ("ls-files: add pathspec matching for submodules",
2016-10-07) and 89a1f4aaf7 ("dir: if our pathspec might match files
under a dir, recurse into it", 2019-09-17). Of course,
do_match_pathspec() had an important advantge over match_pathspec() --
match_pathspec() would hardcode flags to one of two values, and these
new callers needed to pass some other value for flags. Also, although
calling do_match_pathspec() directly was incorrect, there likely wasn't
any difference in the observable end output, because the bug just meant
that fill_diretory() would recurse into unneeded directories. Since
subsequent does-this-path-match checks on individual paths under the
directory would cause those extra paths to be filtered out, the only
difference from using the wrong function was unnecessary computation.
The second of those bad calls to do_match_pathspec() was involved -- via
either direct movement or via copying+editing -- into a number of later
refactors. See commits 777b420347 ("dir: synchronize
treat_leading_path() and read_directory_recursive()", 2019-12-19),
8d92fb2927 ("dir: replace exponential algorithm with a linear one",
2020-04-01), and 95c11ecc73 ("Fix error-prone fill_directory() API; make
it only return matches", 2020-04-01). The last of those introduced the
usage of do_match_pathspec() on an individual file, and thus resulted in
individual paths being returned that shouldn't be.
The problem with calling do_match_pathspec() instead of match_pathspec()
is that any negated patterns such as ':!unwanted_path` will be ignored.
Add a new match_pathspec_with_flags() function to fulfill the needs of
specifying special flags while still correctly checking negated
patterns, add a big comment above do_match_pathspec() to prevent others
from misusing it, and correct current callers of do_match_pathspec() to
instead use either match_pathspec() or match_pathspec_with_flags().
One final note is that DO_MATCH_LEADING_PATHSPEC needs special
consideration when working with DO_MATCH_EXCLUDE. The point of
DO_MATCH_LEADING_PATHSPEC is that if we have a pathspec like
*/Makefile
and we are checking a directory path like
src/module/component
that we want to consider it a match so that we recurse into the
directory because it _might_ have a file named Makefile somewhere below.
However, when we are using an exclusion pattern, i.e. we have a pathspec
like
:(exclude)*/Makefile
we do NOT want to say that a directory path like
src/module/component
is a (negative) match. While there *might* be a file named 'Makefile'
somewhere below that directory, there could also be other files and we
cannot pre-emptively rule all the files under that directory out; we
need to recurse and then check individual files. Adjust the
DO_MATCH_LEADING_PATHSPEC logic to only get activated for positive
pathspecs.
Reported-by: John Millikin <jmillikin@stripe.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The directory traversal code had redundant recursive calls which
made its performance characteristics exponential with respect to
the depth of the tree, which was corrected.
* en/fill-directory-exponential:
completion: fix 'git add' on paths under an untracked directory
Fix error-prone fill_directory() API; make it only return matches
dir: replace double pathspec matching with single in treat_directory()
dir: include DIR_KEEP_UNTRACKED_CONTENTS handling in treat_directory()
dir: replace exponential algorithm with a linear one
dir: refactor treat_directory to clarify control flow
dir: fix confusion based on variable tense
dir: fix broken comment
dir: consolidate treat_path() and treat_one_path()
dir: fix simple typo in comment
t3000: add more testcases testing a variety of ls-files issues
t7063: more thorough status checking
Traditionally, the expected calling convention for the dir.c API was:
fill_directory(&dir, ..., pathspec)
foreach entry in dir->entries:
if (dir_path_match(entry, pathspec))
process_or_display(entry)
This may have made sense once upon a time, because the fill_directory() call
could use cheap checks to avoid doing full pathspec matching, and an external
caller may have wanted to do other post-processing of the results anyway.
However:
* this structure makes it easy for users of the API to get it wrong
* this structure actually makes it harder to understand
fill_directory() and the functions it uses internally. It has
tripped me up several times while trying to fix bugs and
restructure things.
* relying on post-filtering was already found to produce wrong
results; pathspec matching had to be added internally for multiple
cases in order to get the right results (see commits 404ebceda0
(dir: also check directories for matching pathspecs, 2019-09-17)
and 89a1f4aaf7 (dir: if our pathspec might match files under a
dir, recurse into it, 2019-09-17))
* it's bad for performance: fill_directory() already has to do lots
of checks and knows the subset of cases where it still needs to do
more checks. Forcing external callers to do full pathspec
matching means they must re-check _every_ path.
So, add the pathspec matching within the fill_directory() internals, and
remove it from external callers.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
treat_directory() had a call to both do_match_pathspec() and
match_pathspec(). These calls have migrated through the code somewhat
since their introduction, but we don't actually need both. Replace the
two calls with one, and while at it, move the check earlier in order to
reduce the need for callers of fill_directory() to do post-filtering of
results.
The next patch will address post-filtering more forcefully and provide
more relevant history and context.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handling DIR_KEEP_UNTRACKED_CONTENTS within treat_directory() instead of
as a post-processing step in read_directory():
* allows us to directly access and remove the relevant entries instead
of needing to calculate which ones need to be removed
* keeps the logic for directory handling in one location (and puts it
closer the the logic for stripping out extra ignored entries, which
seems logical).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir's read_directory_recursive() naturally operates recursively in order
to walk the directory tree. Treating of directories is sometimes weird
because there are so many different permutations about how to handle
directories. Some examples:
* 'git ls-files -o --directory' only needs to know that a directory
itself is untracked; it doesn't need to recurse into it to see what
is underneath.
* 'git status' needs to recurse into an untracked directory, but only
to determine whether or not it is empty. If there are no files
underneath, the directory itself will be omitted from the output.
If it is not empty, only the directory will be listed.
* 'git status --ignored' needs to recurse into untracked directories
and report all the ignored entries and then report the directory as
untracked -- UNLESS all the entries under the directory are
ignored, in which case we don't print any of the entries under the
directory and just report the directory itself as ignored. (Note
that although this forces us to walk all untracked files underneath
the directory as well, we strip them from the output, except for
users like 'git clean' who also set DIR_KEEP_TRACKED_CONTENTS.)
* For 'git clean', we may need to recurse into a directory that
doesn't match any specified pathspecs, if it's possible that there
is an entry underneath the directory that can match one of the
pathspecs. In such a case, we need to be careful to omit the
directory itself from the list of paths (see commit 404ebceda0
("dir: also check directories for matching pathspecs", 2019-09-17))
Part of the tension noted above is that the treatment of a directory can
change based on the files within it, and based on the various settings
in dir->flags. Trying to keep this in mind while reading over the code,
it is easy to think in terms of "treat_directory() tells us what to do
with a directory, and read_directory_recursive() is the thing that
recurses". Since we need to look into a directory to know how to treat
it, though, it is quite easy to decide to (also) recurse into the
directory from treat_directory() by adding a read_directory_recursive()
call. Adding such a call is actually fine, IF we make sure that
read_directory_recursive() does not also recurse into that same
directory.
Unfortunately, commit df5bcdf83a ("dir: recurse into untracked dirs
for ignored files", 2017-05-18), added exactly such a case to the code,
meaning we'd have two calls to read_directory_recursive() for an
untracked directory. So, if we had a file named
one/two/three/four/five/somefile.txt
and nothing in one/ was tracked, then 'git status --ignored' would
call read_directory_recursive() twice on the directory 'one/', and
each of those would call read_directory_recursive() twice on the
directory 'one/two/', and so on until read_directory_recursive() was
called 2^5 times for 'one/two/three/four/five/'.
Avoid calling read_directory_recursive() twice per level by moving a
lot of the special logic into treat_directory().
Since dir.c is somewhat complex, extra cruft built up around this over
time. While trying to unravel it, I noticed several instances where the
first call to read_directory_recursive() would return e.g.
path_untracked for some directory and a later one would return e.g.
path_none, despite the fact that the directory clearly should have been
considered untracked. The code happened to work due to the side-effect
from the first invocation of adding untracked entries to dir->entries;
this allowed it to get the correct output despite the supposed override
in return value by the later call.
I am somewhat concerned that there are still bugs and maybe even
testcases with the wrong expectation. I have tried to carefully
document treat_directory() since it becomes more complex after this
change (though much of this complexity came from elsewhere that probably
deserved better comments to begin with). However, much of my work felt
more like a game of whackamole while attempting to make the code match
the existing regression tests than an attempt to create an
implementation that matched some clear design. That seems wrong to me,
but the rules of existing behavior had so many special cases that I had
a hard time coming up with some overarching rules about what correct
behavior is for all cases, forcing me to hope that the regression tests
are correct and sufficient. Such a hope seems likely to be ill-founded,
given my experience with dir.c-related testcases in the last few months:
Examples where the documentation was hard to parse or even just wrong:
* 3aca58045f (git-clean.txt: do not claim we will delete files with
-n/--dry-run, 2019-09-17)
* 09487f2cba (clean: avoid removing untracked files in a nested git
repository, 2019-09-17)
* e86bbcf987 (clean: disambiguate the definition of -d, 2019-09-17)
Examples where testcases were declared wrong and changed:
* 09487f2cba (clean: avoid removing untracked files in a nested git
repository, 2019-09-17)
* e86bbcf987 (clean: disambiguate the definition of -d, 2019-09-17)
* a2b13367fe (Revert "dir.c: make 'git-status --ignored' work within
leading directories", 2019-12-10)
Examples where testcases were clearly inadequate:
* 502c386ff9 (t7300-clean: demonstrate deleting nested repo with an
ignored file breakage, 2019-08-25)
* 7541cc5302 (t7300: add testcases showing failure to clean specified
pathspecs, 2019-09-17)
* a5e916c745 (dir: fix off-by-one error in match_pathspec_item,
2019-09-17)
* 404ebceda0 (dir: also check directories for matching pathspecs,
2019-09-17)
* 09487f2cba (clean: avoid removing untracked files in a nested git
repository, 2019-09-17)
* e86bbcf987 (clean: disambiguate the definition of -d, 2019-09-17)
* 452efd11fb (t3011: demonstrate directory traversal failures,
2019-12-10)
* b9670c1f5e (dir: fix checks on common prefix directory, 2019-12-19)
Examples where "correct behavior" was unclear to everyone:
https://lore.kernel.org/git/20190905154735.29784-1-newren@gmail.com/
Other commits of note:
* 902b90cf42 (clean: fix theoretical path corruption, 2019-09-17)
However, on the positive side, it does make the code much faster. For
the following simple shell loop in an empty repository:
for depth in $(seq 10 25)
do
dirs=$(for i in $(seq 1 $depth) ; do printf 'dir/' ; done)
rm -rf dir
mkdir -p $dirs
>$dirs/untracked-file
/usr/bin/time --format="$depth: %e" git status --ignored >/dev/null
done
I saw the following timings, in seconds (note that the numbers are a
little noisy from run-to-run, but the trend is very clear with every
run):
10: 0.03
11: 0.05
12: 0.08
13: 0.19
14: 0.29
15: 0.50
16: 1.05
17: 2.11
18: 4.11
19: 8.60
20: 17.55
21: 33.87
22: 68.71
23: 140.05
24: 274.45
25: 551.15
For the above run, using strace I can look for the number of untracked
directories opened and can verify that it matches the expected
2^($depth+1)-2 (the sum of 2^1 + 2^2 + 2^3 + ... + 2^$depth).
After this fix, with strace I can verify that the number of untracked
directories that are opened drops to just $depth, and the timings all
drop to 0.00. In fact, it isn't until a depth of 190 nested directories
that it sometimes starts reporting a time of 0.01 seconds and doesn't
consistently report 0.01 seconds until there are 240 nested directories.
The previous code would have taken
17.55 * 2^220 / (60*60*24*365) = 9.4 * 10^59 YEARS
to have completed the 240 nested directories case. It's not often
that you get to speed something up by a factor of 3*10^69.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in treat_directory() is handled by a multi-case
switch statement, but this switch is very asymmetrical, as
the first two cases are simple but the third is more
complicated than the rest of the method. In fact, the third
case includes a "break" statement that leads to the block
of code outside the switch statement. That is the only way
to reach that block, as the switch handles all possible
values from directory_exists_in_index();
Extract the switch statement into a series of "if" statements.
This simplifies the trivial cases, while clarifying how to
reach the "show_other_directories" case. This is particularly
important as the "show_other_directories" case will expand
in a later change.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Despite having contributed several fixes in this area, I have for months
(years?) assumed that the "exclude" variable was a directive; this
caused me to think of it as a different mode we operate in and left me
confused as I tried to build up a mental model around why we'd need such
a directive. I mostly tried to ignore it while focusing on the pieces I
was trying to understand.
Then I finally traced this variable all back to a call to is_excluded(),
meaning it was actually functioning as an adjective. In particular, it
was a checked property ("Does this path match a rule in .gitignore?"),
rather than a mode passed in from the caller. Change the variable name
to match the part of speech used by the function called to define it,
which will hopefully make these bits of code slightly clearer to the
next reader.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 16e2cfa909 ("read_directory(): further split treat_path()",
2010-01-08) split treat_one_path() out of treat_path(), because
treat_leading_path() would not have access to a dirent but wanted to
re-use as much of treat_path() as possible. Not re-using all of
treat_path() caused other bugs, as noted in commit b9670c1f5e ("dir:
fix checks on common prefix directory", 2019-12-19). Finally, in commit
ad6f2157f9 ("dir: restructure in a way to avoid passing around a
struct dirent", 2020-01-16), dirents were removed from treat_path() and
other functions entirely.
Since the only reason for splitting these functions was the lack of a
dirent -- which no longer applies to either function -- and since the
split caused problems in the past resulting in us not using
treat_one_path() separately anymore, just undo the split.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git sparse-checkout" learned a new "add" subcommand.
* ds/sparse-add:
sparse-checkout: allow one-character directories in cone mode
sparse-checkout: work with Windows paths
sparse-checkout: create 'add' subcommand
sparse-checkout: extract pattern update from 'set' subcommand
sparse-checkout: extract add_patterns_from_input()
