Drop the last remnant of "sha1" in this file and rename it to reflect
that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generalize the last remnants of "sha" and "sha1" in this file and rename
it to reflect that we're not just able to handle SHA-1 these days.
We need to update one test to check for an updated error string.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create separate diff-merges.c and diff-merges.h files, and move all
the code related to handling of diff merges there.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build optimization.
* rj/make-clean:
Makefile: don't use a versioned temp distribution directory
Makefile: don't try to clean old debian build product
gitweb/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include doc.dep
Commit 0b4396f068, (git-p4: make python2.7 the oldest supported version,
2019-12-13) pointed out that git-p4 uses Python 2.7-or-later features
in the code.
In addition, git-p4 gained enough support for Python 3 from
6cec21a82f, (git-p4: encode/decode communication with p4 for
python3, 2019-12-13).
Let's update our documentation to reflect that fact.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'dist' target uses a versioned temp directory, $(GIT_TARNAME), into
which it copies various files added to the distribution tarball. Should
it be necessary to remove this directory in the 'clean' target, since
the name depends on $(GIT_VERSION), the current HEAD must be positioned
on the same commit as when 'make dist' was issued. Otherwise, the target
will fail to remove that directory.
Create an '.dist-tmp-dir' directory and copy the various files into this
now un-versioned directory while creating the distribution tarball. Change
the 'clean' target to remove the '.dist-tmp-dir' directory, instead of the
version dependent $(GIT_TARNAME) directory.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target includes code to remove an '*.tar.gz' file that
was the by-product of a debian build. This was originally added by
commit 5a571cdd8a (Clean generated files a bit more, to cope with
Debian build droppings., 2005-08-12). However, all support for the
'debian build' was dropped by commit 7d0e65b892 (Retire debian/
directory., 2006-01-06), which seems to have simply forgotten to
remove the 'git-core_$(GIT_VERSION)-*.tar.gz' from the 'clean'
target. Remove it now.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-parse-remote" shell script library outlived its usefulness.
* ab/retire-parse-remote:
submodule: fix fetch_in_submodule logic
parse-remote: remove this now-unused library
submodule: remove sh function in favor of helper
submodule: use "fetch" logic instead of custom remote discovery
We normally get the list of builtin commands by expanding BUILTIN_OBJS.
But for commands which are embedded inside another's source file (e.g.,
cmd_show() in builtin/log.c), the Makefile needs to be told explicitly
about them.
Since cmd_maintenance() is inside buitin/gc.c, it should be listed
explicitly in the BUILT_INS list in the Makefile. Not doing so isn't
_too_ tragic, as it simply means we will not make a git-maintenance
symlink in libexec/git-core. Since we encourage people to use the "git
foo" form, even in scripts which have put libexec into their PATH,
nobody seems to have noticed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
The previous two commits removed the last use of a function in this
library, but most of it had been dead code for a while[1][2]. Only the
"get_default_remote" function was still being used.
Even though we had a manual page for this library it was never
intended (or I expect, actually) used outside of git.git. Let's just
remove it, if anyone still cares about a function here they can pull
them into their own project[3].
1. Last use of error_on_missing_default_upstream():
d03ebd411c ("rebase: remove the rebase.useBuiltin setting",
2019-03-18)
2. Last use of get_remote_merge_branch(): 49eb8d39c7 ("Remove
contrib/examples/*", 2018-03-25)
3. https://lore.kernel.org/git/87a6vmhdka.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strmap as a new struct and associated utility functions,
specifically for hashmaps that map strings to some value. The API is
taken directly from Peff's proposal at
https://lore.kernel.org/git/20180906191203.GA26184@sigill.intra.peff.net/
Note that similar string-list, I have a strdup_strings setting.
However, unlike string-list, strmap_init() does not take a parameter for
this setting and instead automatically sets it to 1; callers who want to
control this detail need to instead call strmap_init_with_options().
(Future patches will add additional parameters to
strmap_init_with_options()).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new test-tool command named 'fast-rebase', which is a
super-slimmed down and nowhere near as capable version of 'git rebase'.
'test-tool fast-rebase' is not currently planned for usage in the
testsuite, but is here for two purposes:
1) Demonstrate the desired API of merge-ort. In particular,
fast-rebase takes advantage of the separation of the merging
operation from the updating of the index and working tree, to
allow it to pick N commits, but only update the index and working
tree once at the end. Look for the calls to
merge_incore_nonrecursive() and merge_switch_to_result().
2) Provide a convenient benchmark that isn't polluted by the heavy
disk writing and forking of unnecessary processes that comes from
sequencer.c and merge-recursive.c. fast-rebase is not meant to
replace sequencer.c, just give ideas on how sequencer.c can be
changed. Updating sequencer.c with these goals is probably a
large amount of work; writing a simple targeted command with
no documentation, less-than-useful help messages, numerous
limitations in terms of flags it can accept and situations it can
handle, and which is flagged off from users is a much easier
interim step.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "git archive" more to produce the release tarball.
* rs/dist-doc-with-git-archive:
Makefile: remove the unused variable TAR_DIST_EXTRA_OPTS
Makefile: use git init/add/commit/archive for dist-doc
There are a few differences between the new API in merge-ort and the old
API in merge-recursive. While the new API is more flexible, it might
feel like more work at times than the old API. merge-ort-wrappers
creates two convenience wrappers taking the exact same arguments as the
old merge_trees() and merge_recursive() functions and implements them
via the new API. This makes converting existing callsites easier, and
serves to highlight some of the differences in the API.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the beginning of a new merge strategy. While there are some API
differences, and the implementation has some differences in behavior, it
is essentially meant as an eventual drop-in replacement for
merge-recursive.c. However, it is being built to exist side-by-side
with merge-recursive so that we have plenty of time to find out how
those differences pan out in the real world while people can still fall
back to merge-recursive. (Also, I intend to avoid modifying
merge-recursive during this process, to keep it stable.)
The primary difference noticable here is that the updating of the
working tree and index is not done simultaneously with the merge
algorithm, but is a separate post-processing step. The new API is
designed so that one can do repeated merges (e.g. during a rebase or
cherry-pick) and only update the index and working tree one time at the
end instead of updating it with every intermediate result. Also, one
can perform a merge between two branches, neither of which match the
index or the working tree, without clobbering the index or working tree.
The next three commits will demonstrate various uses of this new API.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set "use warnings" in most of our perl code to catch problems. But as
the name implies, warnings just emit a message to stderr and don't
otherwise affect the program. So our tests are quite likely to miss that
warnings are being spewed, as most of them do not look at stderr.
We could ask perl to make all warnings fatal, but this is likely
annoying for non-developers, who would rather have a running program
with a warning than something that refuses to work at all.
So instead, let's teach the perl code to respect an environment variable
(GIT_PERL_FATAL_WARNINGS) to increase the severity of the warnings. This
can be set for day-to-day running if people want to be really pedantic,
but the primary use is to trigger it within the test suite.
We could also trigger that for every test run, but likewise even the
tests failing may be annoying to distro builders, etc (just as -Werror
would be for compiling C code). So we'll tie it to a special test-mode
variable (GIT_TEST_PERL_FATAL_WARNINGS) that can be set in the
environment or as a Makefile knob, and we'll automatically turn the knob
when DEVELOPER=1 is set. That should give developers and CI the more
careful view without disrupting normal users or packagers.
Note that the mapping from the GIT_TEST_* form to the GIT_* form in
test-lib.sh is necessary even if they had the same name: the perl
scripts need it to be normalized to a perl truth value, and we also have
to make sure it's exported (we might have gotten it from the
environment, but we might also have gotten it from GIT-BUILD-OPTIONS
directly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of the `SKIP_DASHED_BUILT_INS` option is to stop hard-linking
the built-in commands as separate executables. The patches to do that
specifically excluded the three commands `receive-pack`,
`upload-archive` and `upload-pack`, though: these commands are expected
to be present in the `PATH` in their dashed form on the server side of
any fetch/push.
However, due to an oversight by myself, even if those commands were
still hard-linked, they were not installed into `bin/`.
Noticed-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the dependency on external tools by generating the distribution
archives for HTML documentation and manpages using git commands instead
of tar. This gives the archive entries the same meta data as those in
the dist archive for binaries.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 805d9eaf5e (Makefile: ASCII-sort += lists, 2020-03-21), the += lists
in the Makefile were sorted into ASCII order. Since then, more out of
order elements have been introduced. Sort these lists back into ASCII
order.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive" learns the "--add-file" option to include untracked
files into a snapshot from a tree-ish.
* rs/archive-add-file:
Makefile: use git-archive --add-file
archive: add --add-file
archive: read short blobs in archive.c::write_archive_entry()
Compilation fix around type punning.
* jk/drop-unaligned-loads:
Revert "fast-export: use local array to store anonymized oid"
bswap.h: drop unaligned loads
The installation procedure learned to optionally omit "git-foo"
executable files for each 'foo' built-in subcommand, which are only
required by old timers that still rely on the age old promise that
prepending "git --exec-path" output to PATH early in their script
will keep the "git-foo" calls they wrote working.
The old attempt to remove these executables from the disk failed in
the 1.6 era; it may be worth attempting again, but I think it is
worth to keep this topic separate from such a policy change to help
it graduate early.
* js/no-builtins-on-disk-option:
ci: stop linking built-ins to the dashed versions
Optionally skip linking/copying the built-ins
msvc: copy the correct `.pdb` files in the Makefile target `install`
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
Add new subcommands to 'git maintenance' that start or stop background
maintenance using 'cron', when available. This integration is as simple
as I could make it, barring some implementation complications.
The schedule is laid out as follows:
0 1-23 * * * $cmd maintenance run --schedule=hourly
0 0 * * 1-6 $cmd maintenance run --schedule=daily
0 0 * * 0 $cmd maintenance run --schedule=weekly
where $cmd is a properly-qualified 'git for-each-repo' execution:
$cmd=$path/git --exec-path=$path for-each-repo --config=maintenance.repo
where $path points to the location of the Git executable running 'git
maintenance start'. This is critical for systems with multiple versions
of Git. Specifically, macOS has a system version at '/usr/bin/git' while
the version that users can install resides at '/usr/local/bin/git'
(symlinked to '/usr/local/libexec/git-core/git'). This will also use
your locally-built version if you build and run this in your development
environment without installing first.
This conditional schedule avoids having cron launch multiple 'git
for-each-repo' commands in parallel. Such parallel commands would likely
lead to the 'hourly' and 'daily' tasks competing over the object
database lock. This could lead to to some tasks never being run! Since
the --schedule=<frequency> argument will run all tasks with _at least_
the given frequency, the daily runs will also run the hourly tasks.
Similarly, the weekly runs will also run the daily and hourly tasks.
The GIT_TEST_CRONTAB environment variable is not intended for users to
edit, but instead as a way to mock the 'crontab [-l]' command. This
variable is set in test-lib.sh to avoid a future test from accidentally
running anything with the cron integration from modifying the user's
schedule. We use GIT_TEST_CRONTAB='test-tool crontab <file>' in our
tests to check how the schedule is modified in 'git maintenance
(start|stop)' commands.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our put_be32() routine and its variants (get_be32(), put_be64(), etc)
has two implementations: on some platforms we cast memory in place and
use nothl()/htonl(), which can cause unaligned memory access. And on
others, we pick out the individual bytes using bitshifts.
This introduces extra complexity, and sometimes causes compilers to
generate warnings about type-punning. And it's not clear there's any
performance advantage.
This split goes back to 660231aa97 (block-sha1: support for
architectures with memory alignment restrictions, 2009-08-12). The
unaligned versions were part of the original block-sha1 code in
d7c208a92e (Add new optimized C 'block-sha1' routines, 2009-08-05),
which says it is:
Based on the mozilla SHA1 routine, but doing the input data accesses a
word at a time and with 'htonl()' instead of loading bytes and shifting.
Back then, Linus provided timings versus the mozilla code which showed a
27% improvement:
https://lore.kernel.org/git/alpine.LFD.2.01.0908051545000.3390@localhost.localdomain/
However, the unaligned loads were either not the useful part of that
speedup, or perhaps compilers and processors have changed since then.
Here are times for computing the sha1 of 4GB of random data, with and
without -DNO_UNALIGNED_LOADS (and BLK_SHA1=1, of course). This is with
gcc 10, -O2, and the processor is a Core i9-9880H.
[stock]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 6.638 s ± 0.081 s [User: 6.269 s, System: 0.368 s]
Range (min … max): 6.550 s … 6.841 s 10 runs
[-DNO_UNALIGNED_LOADS]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 6.418 s ± 0.015 s [User: 6.058 s, System: 0.360 s]
Range (min … max): 6.394 s … 6.447 s 10 runs
And here's the same test run on an AMD A8-7600, using gcc 8.
[stock]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 11.721 s ± 0.113 s [User: 10.761 s, System: 0.951 s]
Range (min … max): 11.509 s … 11.861 s 10 runs
[-DNO_UNALIGNED_LOADS]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 11.744 s ± 0.066 s [User: 10.807 s, System: 0.928 s]
Range (min … max): 11.637 s … 11.863 s 10 runs
So the unaligned loads don't seem to help much, and actually make things
worse. It's possible there are platforms where they provide more
benefit, but:
- the non-x86 platforms for which we use this code are old and obscure
(powerpc and s390).
- the main caller that cares about performance is block-sha1. But
these days it is rarely used anyway, in favor of sha1dc (which is
already much slower, and nobody seems to have cared that much).
Let's just drop unaligned versions entirely in the name of simplicity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch --range-diff=<prev> <origin>..HEAD" has been taught
not to ignore <origin> when <prev> is a single version.
* es/format-patch-interdiff-cleanup:
format-patch: use 'origin' as start of current-series-range when known
diff-lib: tighten show_interdiff()'s interface
diff: move show_interdiff() from its own file to diff-lib
For a long time already, the non-dashed form of the built-ins is the
recommended way to write scripts, i.e. it is better to call `git merge
[...]` than to call `git-merge [...]`.
While Git still supports the dashed form (by hard-linking the `git`
executable to the dashed name in `libexec/git-core/`), in practice, it
is probably almost irrelevant.
However, we *do* care about keeping people's scripts working (even if
they were written before the non-dashed form started to be recommended).
Keeping this backwards-compatibility is not necessarily cheap, though:
even so much as amending the tip commit in a git.git checkout will
require re-linking all of those dashed commands. On this developer's
laptop, this makes a noticeable difference:
$ touch version.c && time make
CC version.o
AR libgit.a
LINK git-bugreport.exe
[... 11 similar lines ...]
LN/CP git-remote-https.exe
LN/CP git-remote-ftp.exe
LN/CP git-remote-ftps.exe
LINK git.exe
BUILTIN git-add.exe
[... 123 similar lines ...]
BUILTIN all
SUBDIR git-gui
SUBDIR gitk-git
SUBDIR templates
LINK t/helper/test-fake-ssh.exe
LINK t/helper/test-line-buffer.exe
LINK t/helper/test-svn-fe.exe
LINK t/helper/test-tool.exe
real 0m36.633s
user 0m3.794s
sys 0m14.141s
$ touch version.c && time make SKIP_DASHED_BUILT_INS=1
CC version.o
AR libgit.a
LINK git-bugreport.exe
[... 11 similar lines ...]
LN/CP git-remote-https.exe
LN/CP git-remote-ftp.exe
LN/CP git-remote-ftps.exe
LINK git.exe
BUILTIN git-receive-pack.exe
BUILTIN git-upload-archive.exe
BUILTIN git-upload-pack.exe
BUILTIN all
SUBDIR git-gui
SUBDIR gitk-git
SUBDIR templates
LINK t/helper/test-fake-ssh.exe
LINK t/helper/test-line-buffer.exe
LINK t/helper/test-svn-fe.exe
LINK t/helper/test-tool.exe
real 0m23.717s
user 0m1.562s
sys 0m5.210s
Also, `.zip` files do not have any standardized support for hard-links,
therefore "zipping up" the executables will result in inflated disk
usage. (To keep down the size of the "MinGit" variant of Git for
Windows, which is distributed as a `.zip` file, the hard-links are
excluded specifically.)
In addition to that, some programs that are regularly used to assess
disk usage fail to realize that those are hard-links, and heavily
overcount disk usage. Most notably, this was the case with Windows
Explorer up until the last couple of Windows 10 versions. See e.g.
https://github.com/msysgit/msysgit/issues/58.
To save on the time needed to hard-link these dashed commands, with the
plan to eventually stop shipping with those hard-links on Windows, let's
introduce a Makefile knob to skip generating them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a hard-coded list of `.pdb` files to copy. But we are about to
introduce the `SKIP_DASHED_BUILT_INS` knob in the `Makefile`, which
might make this hard-coded list incorrect.
Let's switch to a dynamically-generated list instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add untracked files for the dist target directly using git archive
instead of calling tar cr to append them. This reduces the dependency
on external tools and gives the untracked files the same access times
and user information as tracked ones, integrating them seamlessly.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow maintainers to tweak $(TAR) invocations done while making
distribution tarballs.
* jc/dist-tarball-tweak:
Makefile: allow extra tweaking of distribution tarball
When set in the environment, GIT_TRACE_REFS makes git print operations and
results as they flow through the ref storage backend. This helps debug
discrepancies between different ref backends.
Example:
$ GIT_TRACE_REFS="1" ./git branch
15:42:09.769631 refs/debug.c:26 ref_store for .git
15:42:09.769681 refs/debug.c:249 read_raw_ref: HEAD: 0000000000000000000000000000000000000000 (=> refs/heads/ref-debug) type 1: 0
15:42:09.769695 refs/debug.c:249 read_raw_ref: refs/heads/ref-debug: 3a238e539b (=> refs/heads/ref-debug) type 0: 0
15:42:09.770282 refs/debug.c:233 ref_iterator_begin: refs/heads/ (0x1)
15:42:09.770290 refs/debug.c:189 iterator_advance: refs/heads/b4 (0)
15:42:09.770295 refs/debug.c:189 iterator_advance: refs/heads/branch3 (0)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The maintainer's dist rules are used to produce distribution
tarballs. They use "$(TAR) cf" and "$(TAR) rf" to produce archives
out of a freshly created local installation area, which means that
the built product can be affected by maintainer's umask and other
local environment.
Implementations of "tar" have ways (implementation specific,
unfortunately) to force permission bits and other stuff to allow the
user to hide these effects coming from the local environment. Teach
our Makefile to allow the maintainer to tweak the invocation of the
$(TAR) commands by setting TAR_DIST_EXTRA_OPTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
show_interdiff() is a relatively small function and not likely to grow
larger or more complicated. Rather than dedicating an entire source file
to it, relocate it to diff-lib.c which houses other "take two things and
compare them" functions meant to be re-used but not so low-level as to
reside in the core diff implementation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tools based on LibClang [1] can make use of a 'JSON Compilation
Database' [2] that keeps track of the exact options used to compile a set
of source files.
For example, clangd [3], which is a C language server protocol
implementation, can use a JSON compilation database to determine the
flags needed to compile a file so it can provide proper editor
integration. As a result, editors supporting the language server
protocol (such as VS Code, Emacs, or Vim, with suitable plugins) can
provide better searching, integration, and refactoring tools.
The Clang compiler can generate JSON fragments when compiling [4],
using the `-MJ` flag. These JSON fragments (one per compiled source
file) can then be concatenated to create the compilation database,
commonly called 'compile_commands.json'.
Add support to the Makefile for generating these JSON fragments as well
as the compilation database itself, if the environment variable
'GENERATE_COMPILATION_DATABASE' is set.
If this variable is set, check that $(CC) indeed supports the `-MJ`
flag, following what is done for automatic dependencies.
All JSON fragments are placed in the 'compile_commands/' directory, and
the compilation database 'compile_commands.json' is generated as a
dependency of the 'all' target using a `sed` invocation.
[1] https://clang.llvm.org/docs/Tooling.html
[2] https://clang.llvm.org/docs/JSONCompilationDatabase.html
[3] https://clangd.llvm.org/
[4] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-mj-arg
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
Git calls an internal `execute_commands` function to handle commands
sent from client to `git-receive-pack`. Regardless of what references
the user pushes, git creates or updates the corresponding references if
the user has write-permission. A contributor who has no
write-permission, cannot push to the repository directly. So, the
contributor has to write commits to an alternate location, and sends
pull request by emails or by other ways. We call this workflow as a
distributed workflow.
It would be more convenient to work in a centralized workflow like what
Gerrit provided for some cases. For example, a read-only user who
cannot push to a branch directly can run the following `git push`
command to push commits to a pseudo reference (has a prefix "refs/for/",
not "refs/heads/") to create a code review.
git push origin \
HEAD:refs/for/<branch-name>/<session>
The `<branch-name>` in the above example can be as simple as "master",
or a more complicated branch name like "foo/bar". The `<session>` in
the above example command can be the local branch name of the client
side, such as "my/topic".
We cannot implement a centralized workflow elegantly by using
"pre-receive" + "post-receive", because Git will call the internal
function "execute_commands" to create references (even the special
pseudo reference) between these two hooks. Even though we can delete
the temporarily created pseudo reference via the "post-receive" hook,
having a temporary reference is not safe for concurrent pushes.
So, add a filter and a new handler to support this kind of workflow.
The filter will check the prefix of the reference name, and if the
command has a special reference name, the filter will turn a specific
field (`run_proc_receive`) on for the command. Commands with this filed
turned on will be executed by a new handler (a hook named
"proc-receive") instead of the internal `execute_commands` function.
We can use this "proc-receive" command to create pull requests or send
emails for code review.
Suggested by Junio, this "proc-receive" hook reads the commands,
push-options (optional), and send result using a protocol in pkt-line
format. In the following example, the letter "S" stands for
"receive-pack" and letter "H" stands for the hook.
# Version and features negotiation.
S: PKT-LINE(version=1\0push-options atomic...)
S: flush-pkt
H: PKT-LINE(version=1\0push-options...)
H: flush-pkt
# Send commands from server to the hook.
S: PKT-LINE(<old-oid> <new-oid> <ref>)
S: ... ...
S: flush-pkt
# Send push-options only if the 'push-options' feature is enabled.
S: PKT-LINE(push-option)
S: ... ...
S: flush-pkt
# Receive result from the hook.
# OK, run this command successfully.
H: PKT-LINE(ok <ref>)
# NO, I reject it.
H: PKT-LINE(ng <ref> <reason>)
# Fall through, let 'receive-pack' to execute it.
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option fall-through)
# OK, but has an alternate reference. The alternate reference name
# and other status can be given in options
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option refname <refname>)
H: PKT-LINE(option old-oid <old-oid>)
H: PKT-LINE(option new-oid <new-oid>)
H: PKT-LINE(option forced-update)
H: ... ...
H: flush-pkt
After receiving a command, the hook will execute the command, and may
create/update different reference. For example, a command for a pseudo
reference "refs/for/master/topic" may create/update different reference
such as "refs/pull/123/head". The alternate reference name and other
status are given in option lines.
The list of commands returned from "proc-receive" will replace the
relevant commands that are sent from user to "receive-pack", and
"receive-pack" will continue to run the "execute_commands" function and
other routines. Finally, the result of the execution of these commands
will be reported to end user.
The reporting function from "receive-pack" to "send-pack" will be
extended in latter commit just like what the "proc-receive" hook reports
to "receive-pack".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a noop fetch negotiator. This is introduced to allow partial clones
to skip the unneeded negotiation step when fetching missing objects
using a "git fetch" subprocess. (The implementation of spawning a "git
fetch" subprocess will be done in a subsequent patch.) But this can also
be useful for end users, e.g. as a blunt fix for object corruption.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in vcs-svn was started in 2010 as an attempt to build a
remote-helper for interacting with svn repositories (as opposed to
git-svn). However, we never got as far as shipping a mature remote
helper, and the last substantive commit was e99d012a6b in 2012.
We do have a git-remote-testsvn, and it is even installed as part of
"make install". But given the name, it seems unlikely to be used by
anybody (you'd have to explicitly "git clone testsvn::$url", and there
have been zero mentions of that on the mailing list since 2013, and even
that includes the phrase "you might need to hack a bit to get it working
properly"[1]).
We also ship contrib/svn-fe, which builds on the vcs-svn work. However,
it does not seem to build out of the box for me, as the link step misses
some required libraries for using libgit.a. Curiously, the original
build breakage bisects for me to eff80a9fd9 (Allow custom "comment
char", 2013-01-16), which seems unrelated. There was an attempt to fix
it in da011cb0e7 (contrib/svn-fe: fix Makefile, 2014-08-28), but on my
system that only switches the error message.
So it seems like the result is not really usable by anybody in practice.
It would be wonderful if somebody wanted to pick up the topic again, and
potentially it's worth carrying around for that reason. But the flip
side is that people doing tree-wide operations have to deal with this
code. And you can see the list with (replace "HEAD" with this commit as
appropriate):
{
echo "--"
git diff-tree --diff-filter=D -r --name-only HEAD^ HEAD
} |
git log --no-merges --oneline e99d012a6bc.. --stdin
which shows 58 times somebody had to deal with the code, generally due
to a compile or test failure, or a tree-wide style fix or API change.
Let's drop it and let anybody who wants to pick it up do so by
resurrecting it from the git history.
As a bonus, this also reduces the size of a stripped installation of Git
from 21MB to 19MB.
[1] https://lore.kernel.org/git/CALkWK0mPHzKfzFKKpZkfAus3YVC9NFYDbFnt+5JQYVKipk3bQQ@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason that git-fast-import benefits from being a separate
binary. And as it links against libgit.a, it has a non-trivial disk
footprint. Let's make it a builtin, which reduces the size of a stripped
installation from 22MB to 21MB.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason that bugreport has to be a separate binary. And since
it links against libgit.a, it has a rather large disk footprint. Let's
make it a builtin, which reduces the size of a stripped installation
from 24MB to 22MB.
This also simplifies our Makefile a bit. And we can take advantage of
builtin niceties like RUN_SETUP_GENTLY.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no real reason for credential helpers to be separate binaries. I
did them this way originally under the notion that helper don't _need_
to be part of Git, and so can be built totally separately (and indeed,
the ones in contrib/credential are). But the ones in our main Makefile
build on libgit.a, and the resulting binaries are reasonably large.
We can slim down our total disk footprint by just making them builtins.
This reduces the size of:
make strip install
from 29MB to 24MB on my Debian system.
Note that credential-cache can't operate without support for Unix
sockets. Currently we just don't build it at all when NO_UNIX_SOCKETS is
set. We could continue that with conditionals in the Makefile and our
list of builtins. But instead, let's build a dummy implementation that
dies with an informative message. That has two advantages:
- it's simpler, because the conditional bits are all kept inside
the credential-cache source
- a user who is expecting it to exist will be told _why_ they can't
use it, rather than getting the "credential-cache is not a git
command" error which makes it look like the Git install is broken.
Note that our dummy implementation does still respond to "-h" in order
to appease t0012 (and this may be a little friendlier for users, as
well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the years some more programs have become builtins, but nobody
updated this MSVC-specific section of the file (which specifically says
that it should not include builtins). Let's bring it up to date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've adopted a convention that any on-stack structure can be
initialized to have zero values in all fields with "= { 0 }", even
when the first field happens to be a pointer, but sparse complained
that a null pointer should be spelled NULL for a long time. Start
using -Wno-universal-initializer option to squelch it.
* lo/sparse-universal-zero-init:
sparse: allow '{ 0 }' to be used without warnings
In standard C, '{ 0 }' can be used as an universal zero-initializer.
However, Sparse complains if this is used on a type where the first
member (possibly nested) is a pointer since Sparse purposely wants
to warn when '0' is used to initialize a pointer type.
Legitimaly, it's desirable to be able to use '{ 0 }' as an idiom
without these warnings [1,2]. To allow this, an option have now
been added to Sparse:
537e3e2dae univ-init: conditionally accept { 0 } without warnings
So, add this option to the SPARSE_FLAGS variable.
Note: The option have just been added to Sparse. So, to benefit
now from this patch it's needed to use the latest Sparse
source from kernel.org. The option will simply be ignored
by older versions of Sparse.
[1] https://lore.kernel.org/r/e6796c60-a870-e761-3b07-b680f934c537@ramsayjones.plus.com
[2] https://lore.kernel.org/r/xmqqd07xem9l.fsf@gitster.c.googlers.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ccd469450a (date.c: switch to reentrant {gm,local}time_r, 2019-11-28)
removes the only gmtime() call we had and moves to gmtime_r() which
doesn't have the same portability problems.
Remove the compat gmtime code since it is no longer needed, and confirm
by successfull running t4212 in FreeBSD 9.3 amd64 (the oldest I could
get a hold off).
Further work might be needed to ensure 32bit time_t systems (like FreeBSD
i386) will handle correctly the overflows tested in t4212, but that is
orthogonal to this change, and it doesn't change the current behaviour
as neither gmtime() or gmtime_r() will ever return NULL on those systems
because time_t is unsigned.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "bugreport" tool.
* es/bugreport:
bugreport: drop extraneous includes
bugreport: add compiler info
bugreport: add uname info
bugreport: gather git version and build info
bugreport: add tool to generate debugging info
help: move list_config_help to builtin/help
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
The build procedure did not use the libcurl library and its include
files correctly for a custom-built installation.
* jk/build-with-right-curl:
Makefile: avoid running curl-config unnecessarily
Makefile: use curl-config --cflags
Makefile: avoid running curl-config multiple times
Code in builtin/*, i.e. those can only be called from within
built-in subcommands, that implements bulk of a couple of
subcommands have been moved to libgit.a so that they could be used
by others.
* dl/libify-a-few:
Lib-ify prune-packed
Lib-ify fmt-merge-msg
Raise the minimum required version of docbook-xsl package to 1.74,
as 1.74.0 was from late 2008, which is more than 10 years old, and
drop compatibility cruft from our documentation suite.
* ma/doc-discard-docbook-xsl-1.73:
user-manual.conf: don't specify [listingblock]
INSTALL: drop support for docbook-xsl before 1.74
manpage-normal.xsl: fold in manpage-base.xsl
manpage-bold-literal.xsl: stop using git.docbook.backslash
Doc: drop support for docbook-xsl before 1.73.0
Doc: drop support for docbook-xsl before 1.72.0
Doc: drop support for docbook-xsl before 1.71.1
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
Teach Git how to prompt the user for a good bug report: reproduction
steps, expected behavior, and actual behavior. Later, Git can learn how
to collect some diagnostic information from the repository.
If users can send us a well-written bug report which contains diagnostic
information we would otherwise need to ask the user for, we can reduce
the number of question-and-answer round trips between the reporter and
the Git contributor.
Users may also wish to send a report like this to their local "Git
expert" if they have put their repository into a state they are confused
by.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting in 3ac68a93fd, help.o began to depend on builtin/branch.o,
builtin/clean.o, and builtin/config.o. This meant that help.o was
unusable outside of the context of the main Git executable.
To make help.o usable by other commands again, move list_config_help()
into builtin/help.c (where it makes sense to assume other builtin libraries
are present).
When command-list.h is included but a member is not used, we start to
hear a compiler warning. Since the config list is generated in a fairly
different way than the command list, and since commands and config
options are semantically different, move the config list into its own
header and move the generator into its own script and build rule.
For reasons explained in 976aaedc (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29), some build
artifacts we consider non-source files cannot be generated in the
Visual Studio environment, and we already have some Makefile tweaks
to help Visual Studio to use generated command-list.h header file.
Do the same to a new generated file, config-list.h, introduced by
this change.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Continue the process of lib-ifying the autostash code. In a future
commit, this will be used to implement `--autostash` in other builtins.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 94a88e2524 (Makefile: avoid running curl-config multiple times,
2020-03-26) put the call to $(CURL_CONFIG) into a "simple" variable
which is expanded immediately, rather than expanding it each time it's
needed. However, that also means that we expand it whenever the Makefile
is parsed, whether we need it or not.
This is wasteful, but also breaks the ci/test-documentation.sh job, as
it does not have curl at all and complains about the extra messages to
stderr. An easy way to see it is just:
$ make CURL_CONFIG=does-not-work check-builtins
make: does-not-work: Command not found
make: does-not-work: Command not found
GIT_VERSION = 2.26.0.108.gb3f3f45f29
make: does-not-work: Command not found
make: does-not-work: Command not found
./check-builtins.sh
We can get the best of both worlds if we're willing to accept a little
Makefile hackery. Courtesy of the article at:
http://make.mad-scientist.net/deferred-simple-variable-expansion/
this patch uses a lazily-evaluated recursive variable which replaces its
contents with an immediately assigned simple one on first use.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the actual data structure name, as well as the source file
that contains the code we're testing. The test scripts need updating to
use the new name, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for computing changed paths Bloom filters,
implement the Murmur3 hash algorithm as described in [1].
It hashes the given data using the given seed and produces
a uniformly distributed hash value.
[1] https://en.wikipedia.org/wiki/MurmurHash#Algorithm
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the DOCBOOK_XSL_172 config knob, which was needed with docbook-xsl
1.72 (but neither 1.71 nor 1.73). Version 1.73.0 is more than twelve
years old.
Together with the last few commits, we are now at a point where we don't
have any Makefile knobs to cater to old/broken versions of docbook-xsl.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
docbook-xsl 1.72.0 is thirteen years old. Drop the ASCIIDOC_ROFF knob
which was needed to support 1.68.1 - 1.71.1. The next commit will
increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add the result of "curl-config --libs" when linking curl programs,
but we never bother calling "curl-config --cflags". Presumably nobody
noticed because:
- a system libcurl installed into /usr/include/curl wouldn't need any
flags ("/usr/include" is already in the search path, and the
#include lines all look <curl/curl.h>, etc).
- using CURLDIR sets up both the includes and the library path
However, if you prefer CURL_CONFIG to CURLDIR, something simple like:
make CURL_CONFIG=/path/to/curl-config
doesn't work. We'd link against the libcurl specified by that program,
but not find its header files when compiling.
Let's invoke "curl-config --cflags" similar to the way we do for
"--libs". Note that we'll feed the result into BASIC_CFLAGS. The rest of
the Makefile doesn't distinguish which files need curl support during
compilation and which do not. That should be OK, though. At most this
should be adding a "-I" directive, and this is how CURLDIR already
behaves. And since we follow the immediate-variable pattern from
CURL_LDFLAGS, we won't accidentally invoke curl-config once per
compilation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user hasn't set the CURL_LDFLAGS Makefile variable, we invoke
curl-config like this:
CURL_LIBCURL += $(shell $(CURL_CONFIG) --libs)
Because the shell function is run when the value is expanded, we invoke
curl-config each time we need to link something (which generally ends up
being four times for a full build).
Instead, let's use an immediate Makefile variable, which only needs
expanding once. We can't combine that with the existing "+=", but since
we only do this when CURL_LDFLAGS is undefined, we can just set that
variable.
That also allows us to simplify our conditional a bit, since both sides
will then put the result into CURL_LIBCURL. While we're touching it,
let's fix the indentation to match the nearby code (we're inside an
outer conditional, so everything else is indented one level).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" has kept an escape hatch to use the scripted version
for a few releases, which got stale. It has been removed.
* tg/retire-scripted-stash:
stash: remove the stash.useBuiltin setting
stash: get git_stash_config at the top level
Revamping of the advise API to allow more systematic enumeration of
advice knobs in the future.
* hw/advise-ng:
tag: use new advice API to check visibility
advice: revamp advise API
advice: change "setupStreamFailure" to "setUpstreamFailure"
advice: extract vadvise() from advise()
In builtin.h, there exists the distinctly lib-ish function
prune_packed_objects(). This function can currently only be called by
built-in commands but, unlike all of the other functions in the header,
it does not make sense to impose this restriction as the functionality
can be logically reused in libgit.
Extract this function into prune-packed.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin.h, there exists the distinctly "lib-ish" function
fmt_merge_msg(). This function can currently only be called by built-in
commands but, unlike most of the other functions in the header, it does
not make sense to impose this restriction as the functionality can be
logically reused in libgit.
Extract this function into fmt-merge-msg.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many += lists in the Makefile and, over time, they have gotten
slightly out of ASCII order. Sort all += lists to bring them back in
order.
ASCII sorting was chosen over strict alphabetical order even though, if
we omit file prefixes, the lists aren't sorted in strictly alphabetical
order (e.g. archive.o comes after archive-zip.o instead of before
archive-tar.o). This is intentional because the purpose of maintaining
the sorted list is to ensure line insertions are deterministic. By using
ASCII ordering, it is more easily mechanically reproducible in the
future, such as by using :sort in Vim.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it's very easy for the advice library's callers to miss
checking the visibility step before printing an advice. Also, it makes
more sense for this step to be handled by the advice library.
Add a new advise_if_enabled function that checks the visibility of
advice messages before printing.
Add a new helper advise_enabled to check the visibility of the advice
if the caller needs to carry out complicated processing based on that
value.
A list of advice_settings is added to cache the config variables names
and values, it's intended to replace advice_config[] and the global
variables once we migrate all the callers to use the new APIs.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
Recent versions of the gcc and clang Address Sanitizer produce test
failures related to regexec(). This triggers with gcc-10 and clang-8
(but not gcc-9 nor clang-7). Running:
make CC=gcc-10 SANITIZE=address test
results in failures in t4018, t3206, and t4062.
The cause seems to be that when built with ASan, we use a different
version of regexec() than normal. And this version doesn't understand
the REG_STARTEND flag. Here's my evidence supporting that.
The failure in t4062 is an ASan warning:
expecting success of 4062.2 '-G matches':
git diff --name-only -G "^(0{64}){64}$" HEAD^ >out &&
test 4096-zeroes.txt = "$(cat out)"
=================================================================
==672994==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7fa76f672000 at pc 0x7fa7726f75b6 bp 0x7ffe41bdda70 sp 0x7ffe41bdd220
READ of size 4097 at 0x7fa76f672000 thread T0
#0 0x7fa7726f75b5 (/lib/x86_64-linux-gnu/libasan.so.6+0x4f5b5)
#1 0x562ae0c9c40e in regexec_buf /home/peff/compile/git/git-compat-util.h:1117
#2 0x562ae0c9c40e in diff_grep /home/peff/compile/git/diffcore-pickaxe.c:52
#3 0x562ae0c9cc28 in pickaxe_match /home/peff/compile/git/diffcore-pickaxe.c:166
[...]
In this case we're looking in a buffer which was mmap'd via
reuse_worktree_file(), and whose size is 4096 bytes. But libasan's
regex tries to look at byte 4097 anyway! If we tweak Git like this:
diff --git a/diff.c b/diff.c
index 8e2914c031..cfae60c120 100644
--- a/diff.c
+++ b/diff.c
@@ -3880,7 +3880,7 @@ static int reuse_worktree_file(struct index_state *istate,
*/
if (ce_uptodate(ce) ||
(!lstat(name, &st) && !ie_match_stat(istate, ce, &st, 0)))
- return 1;
+ return 0;
return 0;
}
to use a regular buffer (with a trailing NUL) instead of an mmap, then
the complaint goes away.
The other failures are actually diff output with an incorrect funcname
header. If I instrument xdiff to show the funcname matching like so:
diff --git a/xdiff-interface.c b/xdiff-interface.c
index 8509f9ea22..f6c3dc1986 100644
--- a/xdiff-interface.c
+++ b/xdiff-interface.c
@@ -197,6 +197,7 @@ struct ff_regs {
struct ff_reg {
regex_t re;
int negate;
+ char *printable;
} *array;
};
@@ -218,7 +219,12 @@ static long ff_regexp(const char *line, long len,
for (i = 0; i < regs->nr; i++) {
struct ff_reg *reg = regs->array + i;
- if (!regexec_buf(®->re, line, len, 2, pmatch, 0)) {
+ int ret = regexec_buf(®->re, line, len, 2, pmatch, 0);
+ warning("regexec %s:\n regex: %s\n buf: %.*s",
+ ret == 0 ? "matched" : "did not match",
+ reg->printable,
+ (int)len, line);
+ if (!ret) {
if (reg->negate)
return -1;
break;
@@ -264,6 +270,7 @@ void xdiff_set_find_func(xdemitconf_t *xecfg, const char *value, int cflags)
expression = value;
if (regcomp(®->re, expression, cflags))
die("Invalid regexp to look for hunk header: %s", expression);
+ reg->printable = xstrdup(expression);
free(buffer);
value = ep + 1;
}
then when compiling with ASan and gcc-10, running the diff from t4018.66
produces this:
$ git diff -U1 cpp-skip-access-specifiers
warning: regexec did not match:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: private:
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ private:
void DoSomething();
int ChangeMe;
};
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
That first regex should match (and is negated, so it should be telling
us _not_ to match "private:"). But it wouldn't if regexec() is looking
at the whole buffer, and not just the length-limited line we've fed to
regexec_buf(). So this is consistent again with REG_STARTEND being
ignored.
The correct output (compiling without ASan, or gcc-9 with Asan) looks
like this:
warning: regexec matched:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
[...more lines that we end up not using...]
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: class RIGHT : public Baseclass
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ class RIGHT : public Baseclass
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
So it really does seem like libasan's regex engine is ignoring
REG_STARTEND. We should be able to work around it by compiling with
NO_REGEX, which would use our local regexec(). But to make matters even
more interesting, this isn't enough by itself.
Because ASan has support from the compiler, it doesn't seem to intercept
our call to regexec() at the dynamic library level. It actually
recognizes when we are compiling a call to regexec() and replaces it
with ASan-specific code at that point. And unlike most of our other
compat code, where we might have git_mmap() or similar, the actual
symbol name in the compiled compat/regex code is regexec(). So just
compiling with NO_REGEX isn't enough; we still end up in libasan!
We can work around that by having the preprocessor replace regexec with
git_regexec (both in the callers and in the actual implementation), and
we truly end up with a call to our custom regex code, even when
compiling with ASan. That's probably a good thing to do anyway, as it
means anybody looking at the symbols later (e.g., in a debugger) would
have a better indication of which function is which. So we'll do the
same for the other common regex functions (even though just regexec() is
enough to fix this ASan problem).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effort to move "git-add--interactive" to C continues.
* js/add-p-in-c:
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
built-in add -p: implement the '/' ("search regex") command
built-in add -p: implement the 'g' ("goto") command
built-in add -p: implement hunk editing
strbuf: add a helper function to call the editor "on an strbuf"
built-in add -p: coalesce hunks after splitting them
built-in add -p: implement the hunk splitting feature
built-in add -p: show different prompts for mode changes and deletions
built-in app -p: allow selecting a mode change as a "hunk"
built-in add -p: handle deleted empty files
built-in add -p: support multi-file diffs
built-in add -p: offer a helpful error message when hunk navigation failed
built-in add -p: color the prompt and the help text
built-in add -p: adjust hunk headers as needed
built-in add -p: show colored hunks by default
built-in add -i: wire up the new C code for the `patch` command
built-in add -i: start implementing the `patch` functionality in C
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ebb7baf0 ("Makefile: add a hdr-check target", 2018-09-19)
implemented hdr-check target, it wanted to leave some header files
exempt from the stricter check the target implements, and added
GEN_HDRS macro.
This however is probably a bad move for two reasons:
- If we value the header cleanliness check, we eventually want to
teach our header generating scripts to produce clean headers.
Keeping the blanket "generated headers can be left as dirty as we
want" exception does not nudge us in the right direction.
- There is a list of generated header files, GENERATED_H, which is
used to keep track of dependencies. Presence of GEN_HDRS that is
too similarly named would confuse developers who are adding new
generated header files which list to add theirs.
- Even though unicode-width.h could be generated using a contrib/
script, as far as our build infrastructure is concerned, it is a
source file that is tracked in the source control system. Its
presence in GEN_HDRS list is doubly misleading.
Get rid of GEN_HDRS, which is used only once to list the headers we
do not run hdr-check test on, and instead explicitly list that the
ones, either tracked or generated, that we exempt from the test.
This allows GENERATED_H to be the sole "here are build artifact
header files that are expendable" list, so use it in the clean
target to $(RM) them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous steps, we re-implemented the main loop of `git add -i`
in C, and most of the commands.
Notably, we left out the actual functionality of `patch`, as the
relevant code makes up more than half of `git-add--interactive.perl`,
and is actually pretty independent of the rest of the commands.
With this commit, we start to tackle that `patch` part. For better
separation of concerns, we keep the code in a separate file,
`add-patch.c`. The new code is still guarded behind the
`add.interactive.useBuiltin` config setting, and for the moment,
it can only be called via `git add -p`.
The actual functionality follows the original implementation of
5cde71d64a (git-add --interactive, 2006-12-10), but not too closely
(for example, we use string offsets rather than copying strings around,
and after seeing whether the `k` and `j` commands are applicable, in the
C version we remember which previous/next hunk was undecided, and use it
rather than looking again when the user asked to jump).
As a further deviation from that commit, We also use a comma instead of
a slash to separate the available commands in the prompt, as the current
version of the Perl script does this, and we also add a line about the
question mark ("print help") to the help text.
While it is tempting to use this conversion of `git add -p` as an excuse
to work on `apply_all_patches()` so that it does _not_ want to read a
file from `stdin` or from a file, but accepts, say, an `strbuf` instead,
we will refrain from this particular rabbit hole at this stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>